Epson EH-TW6100 Bedienungsanleitung

User's Guide[...]

Organization of t he Guide and Notation s in the Guide 1 Using Each Guide The guides for this projector are organized as shown below. Safety Instructions/Support and Service Guide Contains information on using the projector safely, as well as a support and service guide, troubleshooting check lists, and so o n. Make sure you read this guid e before[...]

Organization of t he Guide and Notation s in the Guide 2 Notations Used in This Guide Safety Indications The documentation and the projector use gra phical sy mbols to show how to use the projector safely. The following shows the symbols and their meanings. Please understand and respect these caution symbols in order to avoid injury to persons or p[...]

Contents 3 Organization of the Guide and Notations in the Guide U s i n g E a c h G u i d e ..................... 1 N o t a t i o n s U s e d i n T h i s G u i d e ........... 2 S a f e t y I n d i c a t i o n s ......... ......... ..... 2 G e n e r a l I n f o r m a t i o n I n d i c a t i o n s ............ . 2 About the Use of "This Product[...]

Contents 4 A d j u s t i n g t h e S h a r p n e s s ........ .......... 3 6 S e t t i n g A u t o I r i s .......... ............. . 3 7 S u p e r - r e s o l u t i o n ................ ....... 3 7 I m a g e P r o c e s s i n g ....................... 3 8 Viewing the Image at the Saved Image Quality (Memory Function) . . . . . . . . . . . 39 S a v[...]

Contents 5 P r o b l e m s w i t h U S B s t o r a g e d e v i c e s ........ 8 7 O t h e r p r o b l e m s .......... ............ 8 7 Maintenance M a i n t e n a n c e ...... ............ ...... 8 8 C l e a n i n g t h e P a r t s .......... ........ .... 8 8 C l e a n i n g t h e a i r f i l t e r ... ........... .... 8 8 C l e a n i n g t h e m[...]

Introduction 6 Projector Features Dynamic 3D Display Enjoy 3D contents on Blu-ray and images filmed with a 3D camera th rough a stunning proj ection display. s p.42 You need dedicated 3D Glasses based on 3D Active Shutter Eyewear Technolo gy to view 3D images. s p.43 Selecting Modes to Match what you are Watching (Color Mode) By simply selecting th[...]

Introduction 7 Conforms to Wireless Transmissions for the WirelessHD Standard s (EH-TW6100W Only) The projector can wirelessly receive data for images an d audio from WirelessHD compatible AV devices. You do not need to connect a cable dire ctly to the main projector unit. You can connect up to five AV devices to the Wirele ssHD Transmitter at the [...]

Introduction 8 Part Names and Functions Front/Top Name Function a Lamp cover Open when replacing the projector's lamp. s p.92 b Air exhaust vent Exhaust vent for air used to cool the projector internall y. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damag[...]

Introduction 9 Control Panel Buttons/Indicator s Function a Brightness sensor Detects the brig htness of the room . Wh en Color Mode is set to "Auto", the optimum image quality is set according to the brightness detect ed by the sen- sor. s p.29 b Operation indicator Flashes to indicate warm-up in progre ss or cool-down in progress. Shows[...]

Introduction 10 Remote Control Top section buttons EH-TW6100W EH-TW6100/EH-TW5950 Button Function a Turns the projector on. s p.22 b Turns the projector o ff. s p.23 c The remote control buttons light up for approximately 10 seconds. This is useful when operating the remote control in the dark. d Splits the screen in two and projec ts two image sou[...]

Introduction 11 Middle section buttons Button Function i Changes between 2D and 3D. s p.42 j Changes the Color Mode . s p.29 k Set Super-resoluti on to reduce blurring in areas such as the edges of the im- age. s p.37 l Selects menu items and adjustment values. s p.65 m When a menu is displayed, it accept s and enters the current selection and move[...]

Introduction 12 Bottom section buttons EH-TW6100W EH-TW6100/EH-TW5950 Button Function q Sets Auto Iris. s p.37 r Adjusts the hue, saturation, and brightness for each RGBCMY color. s p.32 s Selects the aspect mode acco rding to the input signal. s p.30 t Performs the function assigned t o the user button. s p.71 A Saves, loads, or erases a memory. s[...]

Introduction 13 Rear Name Functio n a Speaker The projector's built-in speaker. Outputs audio. Set Inverse Audio to On to use the built-in spea ker when the projector is suspended from a ceiling. s Settings - Audio - Inverse Audio p.71 b Power inlet Connects the power cable. s p.22 c Remote receiver Receives signals from the remote control. s [...]

Introduction 14 Base Name Function a Ceiling mount fixing points (four points) Attaches the optiona l ceiling mount h ere when suspending the projector from a ceiling. s p.95 b Front adjustable foot When setup on a surface such as a table, extend the foot to adjust the height. s p.26[...]

Introduction 15 Appearance Units: mm aC e n t e r o f l e n s b Distance from center of lens to suspen sion bracket fixing point[...]

Preparing 16 Installing Various Projection Methods Warning • A special method of installation is required when suspending the projecto r from a ceiling (ceiling mount). If it is not installed correctly, it could fall causing an accident and injury. • If you use adhesives, lubrican ts, or oil on the ceiling mount fixing po ints to preven t screw[...]

Preparing 17 Adjusting the Projection Size The size of the projection increases as th e projector is moved away from the screen. Use the table below to setup the projector at the opti mum position from the screen. The values given here are for your reference only. B Dist ance from th e center of the lens to the base of the projection screen Unit: c[...]

Preparing 18 Connecting to a Device Attention • Turn off the equipment you want to connec t before connecting. If the equipment is on when you connect, it could cause a malfunction. • Check the shape of the cable's connector and th e shape of the port, and th en connect. If you fo rce a connector of a different shape into the po rt, it cou[...]

Preparing 19 Connecting to a Computer To project images from a computer, connect th e computer using one of the following meth ods. When using a computer cable When using an HDMI cable Fix the HDMI cable in place using the HDMI cable clamp. s p.20 Connecting to External Devices Connecting USB devices You can connect USB devices such as USB me morie[...]

Preparing 20 Connecting WirelessHD de vices (EH-TW6100W only) The projector receives transmi ssions from the WirelessHD Transmitter, and projects the images. s p.49 Change the projected image by pressing the button on the remote control or the button on the control panel. c • When receiving WirelessH D images, make sure WirelessHD is set to On . [...]

Preparing 21 Preparing the Remote Control Installing the Remote Control Batteries Attention • Check the positions of the (+) and (-) marks inside the battery holder to en sure the batteries are in serted the correct way. • You cannot use othe r batteries except for the AA size manganese or alkaline. a Remove the battery cover. While pushing the[...]

Basic Operations 22 Starting and Ending Projection Turning on the Proj ector and Projecting a Connect the power cable. Connect using the power cable supplied. b Remove the lens cover. c Turn on the conn ected equipment. d Turn the power on. Remote control Control panel c When Direct Power On is set to On , you can start project ing by simply connec[...]

Basic Operations 23 If the Target Image is not Projected If the image is not projected, you can change the so urce using one of the following methods. Remote control Control panel Press the button for the target port. Press the button and se lect the targe t port. Press the button to confirm the selection. EH-TW6100W EH-TW6100/EH-TW5950 c • For v[...]

Basic Operations 24 f Reattach the lens cover.[...]

Basic Operations 25 Adjusting the Projected Screen Displaying the Test Pattern When adjusting the zoom/focus or the projection position just after settin g up the projector, you can display a test pattern inst ead of connecting video equipment. Press the button on the remot e control to displa y the test patt ern. EH-TW6100W EH-TW6100/EH-TW5950 Pre[...]

Basic Operations 26 Adjusting the Projector's Tilt If the projection screen is tilted (t he left and right sides of the projecto r are at different heights) when the projector is setup on a table, adjust the front fo ot so that both sides are level with each other. Correcting Keystone Distortion You can correct keystone d istortion using one o[...]

Basic Operations 27 You can make effective corrections within a projection angle of 30° left to right. c When using the H-Keystone Adjuster, set H-Keystone Adjuster to On . s Settings - Keystone - H- Keystone Adjuster p.71 Correct manually (H/V-Keystone) You can use the but tons on the control panel to correct keyston e distortion. Press the butto[...]

Basic Operations 28 Adjusting the Volume You can adjust the volume by using the buttons on the remote contro l or the buttons on the projector's control panel. Remote control Control panel c • You can also adjust the volume from the configuration menu. s Settings - Audio p.71 • Under normal conditions, you can adjust th e volume of the pro[...]

Adjusting the Image 29 Adjusting the Image Selecting the Projection Quality (Color Mode) You can obtain the optimum im age qual ity to suit your surroundings when projecting. The brightness of the image varies depending on the mode selected. a Press the button. c You can make settings f rom the configuration men u. s Image - Color Mo de p.66 b Sele[...]

Adjusting the Image 30 Choices when projecting 2D images Mode Applic ation Auto Sets the color mode auto maticall y according to the surroundings. The optimum image qual ity is set acco rding to the brightnes s of the room detected by the sensor (auto color adjustment fun ction). Dynamic Ideal for use in a brig ht room . This is the brightest mode,[...]

Adjusting the Image 31 Input Image Setting Name (Aspect) Normal Full Zoom Wide 4:3 Images 16:9 Images and Images Recorded Using Squeeze Letterbox Im- ages *1*2 Notes Matches the vertical size of the projection panel. The aspect ra- tio differs depend- ing on the input im- age. Uses the entire pro- jection panel. Retains the aspect ratio of the inpu[...]

Adjusting the Image 32 Absolute Color Adjustments Adjusting Hue, Saturation, and Brightness You can adjust the hue, saturation, and brightness for ea ch of the R (red), G (green), B (blue), C (cyan), M (magenta), and Y (yellow) colors . Hue Adjusts the overal l color of the image to be blue, green, or red. Saturation Adjusts the overall vividness o[...]

Adjusting the Image 33 Adjusting the Gamma You can adjust slight coloration differences that may occur due to the device being used when the image is displayed. You can use one of the following three meth ods select ed from the conf iguration m enu. Setting Method Menu Settings Select and adjust the correc- tion value Image - Advanced - Gamma Adjus[...]

Adjusting the Image 34 Adjust using the gamm a adjustment graph Make adjustments while viewing the gamma adjustment graph for the image being projected. a Use the buttons to select the part you want to adjust from the graph. b Use the buttons to adjust the brightne ss, and then press the button to confirm the selection. Adjusting the RGB (Offset/Ga[...]

Adjusting the Image 35 Abs. Color Temp. You can adjust the overall tint of the image. Make adjustments if the image is a little to o blue or too red and so on. The menu is displayed in the following order. Image - Abs. Color Temp. Use the buttons to make adjustment s. Blue tints grow stronge r as the value is increased, and red tints grow stronger [...]

Adjusting the Image 36 Detailed Image Adjustments Adjusting the Sharpness You can make the image clearer. It cannot be adjusted when a comp uter image signal is being input. Thin Line Enhancement Details such as hair and patterns on clothing are enhanced. Thick Line Enhancement Rough parts s uch as outlines fo r entire subject s or the backgrou nd [...]

Adjusting the Image 37 Setting Auto Iris By automatically setting th e luminance according to the brightness of the displayed imag e, it lets you enjoy deep and rich images. You can select the lu minance adjustment t racking for changes in brightness in the display ed image from Normal to High Speed . (Depending on the image, you may hear the auto [...]

Adjusting the Image 38 Image Processing Improves the response speed for images projected at high-speed, such as games. This is only available when receiving a progressive signal input from th e Component, HDMI1, or HDMI2 ports, or from WirelessHD. a Press the button. Remote control Control panel The configuration menu is displayed. b Select Signal [...]

Adjusting the Image 39 Viewing the Image at the Saved Image Quality (Memory Function) Saving Function You can save the adjustment values for some images and image quality settings in the configuration menu for later use (Save Memory). Because these saved adjustment values can be loaded fr o m t h e r e m o t e c o n t r o l , y o u c a n e a s i l [...]

Adjusting the Image 40 Loading a Memory a Press the button, and then select Load Memory . The Load Memory screen is displayed. b Select the target memory name. c • The color mode saved to the memo ry is displayed on the right. • Depending on the input sig nal, part of the loaded memory item may not be applied to the projected image. • Memorie[...]

Adjusting the Image 41 d Enter a name. Use the buttons to select a character, and then press the b u t t o n t o c o n - firm the selection. Enter up to 12 characters. When you have finished entering the name, se- lect Finish . The memory name is changed.[...]

Useful Functions 42 Enjoying 3D Images Setting 3D Images When 3D data is received from the HDMI1, HDMI2, or WirelessHD (EH-TW6100W only) source, the imag e is automatically projected in 3D. The following 3D formats are suppo rted. • Frame Packing • Side by Side • Top and Bottom a Connect an AV device capable of playing 3D images to the projec[...]

Useful Functions 43 Using 3D Glasses Use the supplied or optional 3D Gla sses (ELPGS03) to view 3D images. Depending on the model, 3D Glasses may not be supplied. c The 3D Glasses come with protective stickers . Remove the protective stickers before use. Charging the 3D Glasses The following charging methods are available, depe nding on the model o[...]

Useful Functions 44 c • For 3D Glasses that have not been used, pairing is performed when the 3D Glasses are turned on. You do not need to perform pairing if 3D images can alread y be viewed correc tly. • Once pairing has been performed, yo u can view 3D i mages the next time the de vices are turned o n. • You can perform pairing within a ra [...]

Useful Functions 45 c • 3D images may not be displayed correctly if th ere is any interference from other Blueto oth communication devices. D o not use these devices at the same time . • The communication method for 3D Glasses uses the same frequency (2.4 GHz) as wire less LAN (IEEE802.11b/g) or microwave ovens. Therefore, if th ese devices are[...]

Useful Functions 46 Caution 3D Glasses • Do not drop or press to o forcefully on the 3D Glasses. If the glass sections and so on are bro ken, an injury could occur. Store the glasses in the soft glasses case supplied. • Be careful o f the edges of the fr ame when wearing the 3D Glasses. If it pokes your eye and so on, an injury could occur. •[...]

Useful Functions 47 Caution Watching 3D Images • If your eyes feel fatigued or uncomfortable wh en viewing 3D images, stop viewing immediately. Continuing to view the 3D images could cause you to feel unwell. • When viewing 3D images be sure to always wear 3D Glasses. Do not attem pt to view 3D images without 3D Glasses. Doing so could cause yo[...]

Useful Functions 48 Converting 2D Images to 3D and Viewing You can convert 2D images from HDMI1, HDMI2, or WirelessHD (EH-TW6100W only). a Press the button. Remote control Control panel The configuration menu is displayed. b Select Signal - 3D Setu p , and then press the button to confirm the selection. The 3D Se tup screen is displayed. c Select 2[...]

Useful Functions 49 Connecting with WirelessHD (EH-TW6100W Only) Installing the WirelessHD Transmitter You can use the supplied WirelessHD Transmitter to wirelessly receive image and sound data. Projector Transmitter Multi-media players, game consoles, and so on You can use the WirelessHD Transm itter in the following ways. • You do not need to c[...]

Useful Functions 50 WirelessHD Transmitter part names Front Rear Name Function a t button Turns the transmitt er on or off. This performs the same function as the button for WiHD Tran smit- ter control on the lower sect ion of the remote control. b Input button Changes to the image from each input port. This performs the same function as the button[...]

Useful Functions 51 c • The receiver is located within the intake vent of the projector and th erefore cannot receive any signal s directly from the rear. Set up so that the front of the projector is fa cing the WirelessHD Transmitter. Also, make sure that the air in take vent on the left-hand side of th e projector is not covered. • Place the [...]

Useful Functions 52 Projecting Images a Start playback on the AV device, and then turn on the projec tor and the WirelessHD Transmitter. The t indicator on the Wirele ssHD Transmitter turns on. b Check the status of the WiHD indi cator on the WirelessHD Transmitter. If the WiHD indicator is on, go to the next step. If the indicator is off, press th[...]

Useful Functions 53 d If projection does not start, press the button on the remote control to change the source. Make sure you point the remote cont rol at the projector when using the button on the remote control. Projection starts. e When connecting two or more AV devices to the WirelessHD Tran smitter, press the button to switch images. s p.57 c[...]

Useful Functions 54 WirelessHD Transmission Range The following shows the communication transmission ra nge for the WirelessHD. Make sure you set up the WirelessHD Transmitter so that it faces the projector. Horizontal direction Vertical direction (placed on a table and so on ) Vertical direction (suspended from a ceiling) c • The wireless transm[...]

Useful Functions 55 Useful Functions of the WirelessHD Transmitter With the WirelessHD Transmitter, you can connect an d switch between five multi-media players (input devices to be played ba ck) and one output d evice (an outp ut device displaying an image, such as a television). Image output Image input c Make sure you point the remote control at[...]

Useful Functions 56 c Point the remote control at the Wirele ssHD Transmitter, an d then press the button. Remote control WirelessHD Transmit- ter Depending on the output ta rget, the WiHD indicator on the WirelessHD Transmitter indicates the following status. On: The image is being ou tput to the projector. Off: The image is being output to anothe[...]

Useful Functions 57 Switching the image source You can switch the image source for the AV device co nnected to the WirelessHD Tr ansmitter. When switching, each input source is displayed on one screen as a prev iew. This allows you to sw itch easily between image sources even when two or more devices are connected using HDMI. The pro jector uses In[...]

Useful Functions 58 c • When the sub-screen is displayed, press the button to switch the imag e for the sub-scree n. • When the sub-screen is displayed, press the button to change the position and size (large/small) of the sub-screen. Each time the button is pressed, the display position moves from bottom right , top right, top left, and b otto[...]

Useful Functions 59 Using the HDMI Link Function HDMI Link Function When an AV device that meets the HDMI CEC standards is conn ected to the projector's HDMI port, you can perform linked operations such as linked power on and volume adjustment for the AV system from one remote control. Also, when projec ting images in Wirele ssHD, you ca n use[...]

Useful Functions 60 Device Connections You can check the connected devices that are available f or H DMI Lin k, a nd sel ect on the dev ice you wan t to project the image from. Devices that ca n be controlle d by HDMI link automatically become the selected device. a Press the button, and then select Device Connections . The Device Connecti ons list[...]

Useful Functions 61 Changing Between Two Types of Images Types of Screen that can be Displayed S imultaneous ly You can project two different images at once, one on t he left and one on the righ t. You can project th ese images at the same size, or make one larger or smaller th an the other to view a sub image while you are watching the larger main[...]

Useful Functions 62 Changing the split screen settings You can change the source and the display size used for split screen display from the Split Scree n Setup menu. a Press the button during split screen projection. The Split S creen Setup menu is displayed. c Press the button during split screen projection to immediately display the Split Screen[...]

Useful Functions 63 Playing Back Image Data (Slideshow) Compatible Data The following types of files stored on USB storage devices such as USB memories, digital cameras, and so on that are connected to the projector's USB port can be displayed as a slideshow. Slideshow compatible file types File Type (Extension) Notes .jpg • Images using CMY[...]

Useful Functions 64 Display Settings for Image Files and Slideshow O peration Settings You can set the file display order and slid eshow operations on the option screen. a Use the buttons to position the cursor over the folder where you want to set display conditions, and then press the button. Select Option from the submenu displayed, and then pre[...]

Configuration Menu 65 Configuration Menu Functions Configuration Menu Operations On the configuration men u, you can make adjustments and settings for Signal, Image, Input Signal, and so on. a Press the button. Remote control Control panel The configuration menu is displayed. b Use the buttons to select the top menu on the left, and then press the [...]

Configuration Menu 66 c For items adjusted using an adju stment bar, such as the brightness l evel, you can press the button while the adjustmen t screen is displayed to return th e adjustment value to its default va lue. Configuration Menu Table If there is no image signal being input, you ca nnot adjust items related to th e image or signal in th[...]

Configuration Menu 67 Function Menu/Settings Explanation Advanced Gamma 2.0, 2.1, 2.2, 2.3, 2.4 Per forms gamma adjustments. You can select a raw value or adjust the gamm a while looking at th e image or graph. s p.33 Customized Adjust it from the im- age, Adjust it from the graph Reset RGB Offset R/G/B Adjusts the offs et and gai n for each R, G ,[...]

Configuration Menu 68 Signal menu No sub menu items are displa yed for the signal menu for USB signal input. Function Menu/Settings Explanation 3D Setup *6 3D Display On, Off Enables or di sables the 3D Display function. s p.42 2D-to-3D Conver- sion Off, Weak, Medium, Strong Sets the strength of the 3D effect when convert- ing 2D to 3D images. s p.[...]

Configuration Menu 69 Function Menu/Settings Explanation Progressive *2 Off, Video, Film/Auto *1 *5 (This can only be set when receiving signal input from the Video port or when receiving 480i, 576i, or 1080i signal input from the Component, HDMI1, or HDMI2 ports or from WirelessHD.) Converts the signal from interlaced (i) to pro- gressive (p) usin[...]

Configuration Menu 70 Function Menu/Settings Explanation Advanced Noise Reduc- tion *2 *5 Off, 1, 2, 3 Smoothes out rough images . There are th ree modes availabl e. Select yo ur favorite set ting. It is recommended that this is set to Off when viewing image sources in which noise is very low, such as for DVDs. Setup Level *2 *5 0%, 7.5% (This can [...]

Configuration Menu 71 Settings menu Function Menu/Settings Explanation Keystone H/V-Keystone V-Keystone -60 - 60 Performs vertical keystone correc- tion. s p.27 H-Keystone -60 - 60 Performs horizontal keystone cor- rection. s p.27 Auto V-Keystone On, Off Enables or disables Au to V-Key- stone . s p.26 H-Keystone Adjuster On, Off Enables or disables[...]

Configuration Menu 72 Function Menu/Settings Explanation Wirele ssHD * Device Connections - Displays a list of available Wire- lessHD device s that can be connec- ted. WirelessHD On, Off Enables or disables the WirelessHD function. Reception Displays the reception. Reset Yes, No Resets WirelessHD s ettings to their default settings. Note that even [...]

Configuration Menu 73 Function Menu/Settings Explanation Projection Front, Front/Ceiling, Rear, Rear/Cei ling Change t his se tting de pending on how the projector is installed. • Front : Select if you are projecting in front of the screen. • Front/Ceiling : Select i f you are projecting in front of the screen suspended from the ceiling. • Re[...]

Configuration Menu 74 Function Menu/Settings Explanation Display Menu Position - Sets the position w here th e menu should be dis- played. Menu Color Colo r 1, Color 2 Selects the color for the top menu. • Color 1 : Black • Color 2 : Blue Messages On, Off Sets whether or not to display th e following mes- sages (On or Off). • Item names for i[...]

Configuration Menu 75 Info menu Function Explanation Lamp Hours Displays the cumulative lamp operating time. Source Displays the source name for the connected equipment currently being proj ec- ted. Input Signal Displays the content of Input Signal set in the Signal menu according to the source. Resolution Displays the resolution. Scan Mode Display[...]

Configuration Menu 76 Split Screen menu Displayed by pressing the button during split screen pro jection. Function Menu/Settings Explanation Split Screen Screen Size Equal, Larger Left, Larger Right Changes the left and right screen sizes. s p.62 Source Left, Right PC Video Componen t HDMI1/HDMI2 WirelessHD * Selects wh ich source is displayed on t[...]

Troubleshooting 77 Problem Solving Reading the Indicators You can check the status of the pr oj ector from the flashing and lit , (operation ind icators), o and m on the control panel. Refer to the following table to check the projector' s status and how to remedy problems shown by the indicators. Indicator status during an error/warning : Lit[...]

Troubleshooting 78 Indicators Status Remedy (red) Lamp Error Lamp Failure There is a problem with the lamp , or it failed to turn on. • Disconnect the power cable, and then check if the lamp is cracked. s p.92 If it is not cracked, reinstall the lamp and turn on the power. If reinstalling the lamp does not fix the problem, or if the lamp is crack[...]

Troubleshooting 79 Indicators Status Remedy (blue) Projection in pro- gress The projector is operating normally. c • Under normal operating conditions, the o and m indicators are off. • When the Illumination function is set to Off , all indicators are off under normal projection condit ions. s Extended - Operation - Illuminat ion p.73 When the [...]

Troubleshooting 80 Problem Page Problems with USB storage devices Slideshow does not start p.87 Other problems No audio, or the audio is too low. p.87 * Because color reproduction differs between monitors and computer LC D screens, the image projected by the projector and the color tones displayed on the moni tor may not match, however this is not [...]

Troubleshooting 81 "Not supported" is displayed Check Remedy Is the image signal format sett ing correct? When Video is input If nothing is proj ected even when Video Signal is se t to Auto from the configurat ion menu, set the signal that matc hes the connected device. s Extended - Input Signal - Video Sig- nal p.73 When Component is inp[...]

Troubleshooting 82 Check Remedy Has condensation formed on the lens? If the projecto r is suddenly taken from a cold environment to a warm environment, or if sudde n ambient temperature changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the projector up in the room about one hour befo[...]

Troubleshooting 83 Image colors are not right Check Remedy Is the image signal format sett ing correct? When Video is input If nothing is proj ected even when Video Signal is se t to Auto from the configurat ion menu, set the signal that matc hes the connected device. s Extended - Input Signal - Video Sig- nal p.73 When Component is input If nothin[...]

Troubleshooting 84 Problems when projection starts The projector do es not turn on Check Remedy Is the power turned on? Press the button on the remote control or th e button on the contro l panel. Is Child Lock set to On ? When Child Lock is set to On from the configuration menu, hold down the button on the control pa nel for approximately three se[...]

Troubleshooting 85 Problems with 3D Cannot project correctly in 3D Check Remedy Are the 3D Glasses turned on? Turn on the 3D Glasses. Is a 3D image being projected? If the projector is projecting a 2D image, or if an error occurs on the projector that prevents the 3D image from being projected, you cannot view 3D images even if you are wearing the [...]

Troubleshooting 86 Check Remedy Was a new device connected, or was the con- nection changed? If the CEC func tion for a connected device need s to be set again, for example when a new device is connected or the connection is changed, you may need to restart the device. Are many multi-media players connected? Up to 3 mult i-media players that meet t[...]

Troubleshooting 87 Check Remedy Is surround sound bein g output? When audio is outp ut from the projector' s speakers , it is also output from the projector's Optical Audio-Out port in 2ch stereo. When you want to use surroun d sound, we recommend con- necting directly to the source device using an HDMI cable. Interference or distortion a[...]

Maintenance 88 Maintenance Cleaning the Parts You should clean the projecto r if it becomes dirty or if the quality of projected ima ges starts to deteriorat e. Warning Do not use sprays that contain flammable gas to remove dirt an d dust from the projector's lens, air filter, and so on. The projector may catch fire due to the high internal te[...]

Maintenance 89 d Hold the air filter with the surface facing down and tap it 4 or 5 times to remove the dust. Turn it over and tap the other side in the same way. Attention If the air filter is hit too hard, it may become unusable due to deformities and cracks. e Remove any dust remaining on the air filter by using a vacuum cleaner from the front s[...]

Maintenance 90 Cleaning the lens Use a commercially a vailable cloth fo r cleaning glas ses to g ently wipe off dirt from the lens. Attention Do not rub the lens with hars h materials or handle the l ens too roughly as it can easily b ecome damaged. Cleaning the 3D Glasses Use the cloth supplied to gently wipe off dirt from the lenses of the 3D Gla[...]

Maintenance 91 Replacing Consumables Replacing the air filter c Dispose of used air filters in accordance with your local laws and regulations. Material: Polypropylene a Press the button on the remote control or the control panel to turn off the power, and then disconnect the power cable. b Remove the air filter cover. Hook your finger into the tab[...]

Maintenance 92 Replacing the lamp Warning When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector that has been suspended from the ceil ing, you should al ways assume that the lamp is cracked, and remove the la mp cover with care. When you open the lamp co[...]

Maintenance 93 g Tighten the lamp fixing screw. h Install the lamp cover. Slide the cover back into place. i Tighten the lamp cover fixing screw. Warning Do not disassemble or remodel the lamp. Caution • Make sure you instal l the lamp an d lamp cover secure ly. If they are not ins tal led correctly, the power does not turn on. • The lamp conta[...]

Maintenance 94 c Select Reset - Reset Lamp Hours . A reset confirmation message is displayed. d Use the buttons to select Yes , and then p ress the button to execute. The lamp ho urs are reset.[...]

Appendix 95 Optional Accessories and Consumables The following optional accessories/consumable s are availa ble for purchase if required. This list of optional accessories/consumables is current as of: 2012 .7. Details of accessories are subject to change without notice. Varies depending on country of purchase. Optional Items Name Model No. E xplan[...]

Appendix 96 Supported Resolutions Component Video Signal Refresh Rate (Hz) Resolution (dots) SDTV (480i) 60 720 x 480 SDTV (576i) 50 720 x 576 SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p) 50/60 1920 x 1080 Composite Video Signal Refresh Rate (Hz) Resolution (dots) TV (NTS[...]

Appendix 97 HDMI1/HDMI2 Input Signal Signal Refresh Rate (Hz) Resolution (dots) VGA 60 640 x 480 SDTV (480i) 60 720 x 480 SDTV (576i) 50 720 x 576 SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p) 24/50/60 1920 x 1080 3D Input Signal Signal Refresh Rate (Hz) Resolution (dots) [...]

Appendix 98 Specifications Product name EH-TW6100W/EH-TW6100/EH-TW5950 Appearance (not including adjustable foot) 420 (W) x 137.3 (H) x 365 (D) mm Panel Size 0.61" wide Display met hod Polysilicon TFT active matrix Resolution 1920 (W) x 1080 (H) x 3 Scanning Fre- quency Digital Pixel Clock: 13.5 - 148.5 MHz Horizontal: 15.63 - 67.5 kHz Vertica[...]

Appendix 99 This product is also designed for IT power distri bution system with phas e-to-phase voltage 230V. Обладнанн я відповідає вимогам Тех нічного реглам енту обмеження використання деяких небезпечних речовин в електричному та елек?[...]

Appendix 100 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Compute rs and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Tel: 562-981-3840 Declare under sole responsibility that the product[...]

Appendix 101 Glossary This section briefly explains the difficult terms that are n ot explained in context in the text of th is guide. For details, refer to other commerc ially available publications. Aspect Ratio The ratio between an image' s length and its he ight. Screens with a horizontal:vertical ratio of 16:9, such as HDTV screen s, are [...]

Appendix 102 General Notes All rights reserved. No part of this publication may be reproduced, stor ed in a retrieval system, or transmitted in any form or by any means, electr onic, mechanical, photocop ying, recordin g, or otherwise, without the prior written permission of Seiko Epson Corp oration. No patent liability is as sumed with respect to [...]

Appendix 103 General Notice HDMI and High-Definition Mult imedia Interface are the trademarks or re gistered trademarks of HDMI Licensing LLC. WirelessHD, WiHD, and the WiHD logo are trademar ks or registered trademarks of WirelessHD LLC. The Full HD 3D Glasses ™ logo and Full HD 3D Glasses ™ are trademarks of the Full HD 3D Glasses Initiative [...]

Index 104 3 3D brightness ............ ........................ ............. 68 3D display ............ ................ ................. ............ 68 3D format ........... .................................. ............ 68 3D Glasses ... .................. .................... ............... 42 3D Gl asses c harging port ....................[...]

Index 105 K Keystone ......... ...................... ..................... 26, 71 Keystone distortion ... .................... ............... 26 L Lamp cover ...... ........................................ ... 8, 92 Lamp cover fixing screw . ............................ 92 Lamp hours ............ ...................... .................... 7 5 La[...]

Index 106 U USB ...................................... ............................... 63 USB port .............. ................................. ............. 19 User button ...................... ........................ ........ 73 V Video port ........................................................ 18 Video signal ............. .............[...]