Epson ELPLL02 Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 31 Seiten
- 0.74 mb
Zur Seite of
Ähnliche Gebrauchsanleitungen
- 
									
                                        PrinterEpson WP-4540233 Seiten 3.07 mb
- 
									
                                        PrinterEpson 9600192 Seiten 2.66 mb
- 
									
                                        DVREpson DLR3-08N/660CD64 Seiten 0.45 mb
- 
									
                                        ProjectorEpson 750c2 Seiten 2.01 mb
- 
									
                                        All in oneEpson Stylus SX235W1 Seiten 0.1 mb
- 
									
                                        ProjectorEpson Z8000WUNL169 Seiten 4.83 mb
- 
									
                                        Beamer projectorEpson EH-LS9600W133 Seiten 9.53 mb
- 
									
                                        PrinterEpson 30091 Seiten 0.73 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Epson ELPLL02 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Epson ELPLL02, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Epson ELPLL02 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Epson ELPLL02. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung Epson ELPLL02 sollte vor allem folgendes enthalten: 
							 - Informationen über technische Daten des Geräts Epson ELPLL02 
							 - Den Namen des Produzenten und das Produktionsjahr des Geräts Epson ELPLL02 
							 - Grundsätze der Bedienung, Regulierung und Wartung des Geräts Epson ELPLL02 
							 - Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen 
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Epson ELPLL02 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Epson ELPLL02 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Epson finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Epson ELPLL02 zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Epson ELPLL02, über die Nutzung bestimmter Accessoires  und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Epson ELPLL02 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
- 
                            Seite 19 User ’ s Man ual f or ELPLL02 Long-Focal Length Zoom Lens • This long-focal length zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illust[...] 
- 
                            Seite 210 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t[...] 
- 
                            Seite 311 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa[...] 
- 
                            Seite 412 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading “UPPER” is on t[...] 
- 
                            Seite 513 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_LTZL_DTP_E.pm6 01.2.15, 4:20 PM Page 13 Adob[...] 
- 
                            Seite 615 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 68.3 to 1 16.2 mm 2. Zoom ratio 1.7 x 3. f number 2.14 to 2.98 4. Projection size 60 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.2.15, 4:20 PM Page 15 Adobe PageMaker 6.0J/PPC[...] 
- 
                            Seite 79 User ’ s Manual f or Long Thr ow Zoom Lens ELPLL03 • This long throw zoom lens is designed for use only with EPSON multi- media projectors. • It makes it possible to increase the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may [...] 
- 
                            Seite 810 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to screw the Long thro w zoom lens and adapter ring down completely . Unless the y are securely scre wed on, they could f all off and cause damage or injur y (es- pecially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t[...] 
- 
                            Seite 911 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa[...] 
- 
                            Seite 1012 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading “UPPER” is on t[...] 
- 
                            Seite 1113 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_LTZL_DTP_E.pm6 01.2.15, 4:23 PM Page 13 Adob[...] 
- 
                            Seite 1215 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 144.1 to 194.5mm 2. Zoom ratio 1.35 x 3. f number 2.60 to 3.27 4. Projection size 80 to 300 inches 5. Mass 2100 g 4-2 Appearance with zoom lens mounted About 505mm 02_LTZL_DTP_E.pm6 01.2.15, 4:23 PM Page 15 Adobe PageMaker 6.0J/PPC[...] 
- 
                            Seite 1311 User ’ s Manual f or ELPLR01 Rear Projector wide Lens • This wide-angle lens is designed for use only on EPSON multimedia projectors. • This lens is designed for use only on rear projection and rear projection box systems. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may di[...] 
- 
                            Seite 1412 1. Bef ore mounting the wide-angle lens 1-1 Safety precautions W arning Be sure to scre w the Rear Projector wide lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you hav[...] 
- 
                            Seite 1513 2. Mounting the rear -pr ojection wide-angle lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations below[...] 
- 
                            Seite 1614 Rear lens cap (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the rear -pr ojection wide-angle lens (1) Mounting the rear-projection wide-angle lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the rear projector wide lens with [...] 
- 
                            Seite 1715 (2) Adjusting the wide lens f or a rear projector • This lens must be adjusted to match the screen size. Adjust the lens as follows, before installing the front case. 1. T urn the lens shift button to move the lens all the way down. 2. Loosen the 2 focus ring mounting screws by using the hex wrench that came in the same package. 3. Loosen the [...] 
- 
                            Seite 1816 (3) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 16 Adobe PageMaker 6.0J/PPC[...] 
- 
                            Seite 1918 4. Rear -pr ojection wide-angle lens specifications 4-1 Lens specifications 1. Focal length 27mm 2. f number 2.3 3. Projection size 60 to 100 inches 4. Mass 1600 g 4-2 Appearance with rear pr ojector wide lens mounted About 455mm 02_RPWL_DTP_E.pm6 01.2.15, 4:17 PM Page 18 Adobe PageMaker 6.0J/PPC[...] 
- 
                            Seite 209 User ’ s Man ual f or ELPLS01 Standar d Lens • This standard lens is designed for use only with EPSON multimedia pro- jectors. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer slightly from your actual product. • Specifications are subject to change without notice. S[...] 
- 
                            Seite 2110 1. Bef ore mounting the standard lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have a[...] 
- 
                            Seite 2211 2. Mounting the standar d lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match yo[...] 
- 
                            Seite 2312 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the standar d lens (1) Mounting the standard lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the standard lens with the four mounting screws. Be sure that the seal reading “UP-[...] 
- 
                            Seite 2413 (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo Be sure to remov e the front lens cap bef ore turning on the power , or it may melt from the heat. 02_SL_DTP_E.pm6 01.2.15, 4:19 PM Page 13 Adobe [...] 
- 
                            Seite 2515 4. Standar d lens specifications 4-1 Lens specifications 1. Focal length 49.2 to 68.9 mm 2. Zoom ratio 1.4 x 3. f number 1.84 to 2.36 4. Projection size 30 to 300 inches 5. Mass 1300 g 4-2 Appearance with standar d lens mounted About 475mm 02_SL_DTP_E.pm6 01.2.15, 4:19 PM Page 15 Adobe PageMaker 6.0J/PPC[...] 
- 
                            Seite 269 User's Manual f or the ELPL W01 Wide Zoom Lens • This wide zoom lens is designed for use only with EPSON multimedia projectors. • It makes it possible to decrease the distance between the projector and the screen. • Please read this manual completely before use to assure maximum per - formance. • Note that illustrations may dif fer s[...] 
- 
                            Seite 2710 1. Bef ore mounting the zoom lens 1-1 Safety precautions W arning Be sure to scre w the Long-F ocal Length lens and adapter ring down completely . Unless they are securely screw ed on, they could f all off and cause damage or injur y (especially when the projector is ceiling-mounted). 1-2 Chec k product contents • Make sure that you have all t[...] 
- 
                            Seite 2811 2. Mounting the zoom lens W arning Be sure to disconnect the pow er cable bef ore installa- tion, because there is danger of electrical shock. Memo Alwa ys mount and dismount the lens in a clean room, to minimize the amount of dust. Excessiv e dust inside the lens could cause damage . • Note that the illustrations belo w ma y not match your pa[...] 
- 
                            Seite 2912 (2) Remov e the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws. Be sure that the seal reading "UPPER" i[...] 
- 
                            Seite 3013 (2) Mounting the front case 1. Set the front case into position and tighten the three screws. This completes installation. • T urn on the power and verify that the projector operates nor- mally . Memo • Be sure to remov e the front lens cap be- f ore tur ning on the po wer , or it ma y melt from the heat. • When handling the zoom lens , ta[...] 
- 
                            Seite 3115 4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 37.9 to 45.5 mm 2. Zoom ratio 1.2 x 3. f number 2.34 to 2.65 4. Projection size 60 to 200 inches 5. Mass 2600 g 4-2 Appearance with zoom lens mounted About 480mm 02_STZL_DTP_E.pm6 01.2.15, 4:22 PM Page 15 Adobe PageMaker 6.0J/PPC[...] 

