Epson R1400 Bedienungsanleitung

1 IMPORTANT If your printer is ne w, set it up according to the enclosed manufact urers instructions. This is a check to ensure your new printer and drivers are workin g correctly before the Eco-Flo System is installed. ECO-FLO CONTINUOUS INK SYSTEM Perma Jet Assembly Instructions for : R1400 Ink System I t is very important you read the se instruc[...]

2 Check Lis t for Comp onents ___________ ______________ _____________ _____________ _____________ ______________ _____________ _ Set of 6 125ml Inks Inje ctor Set & Tubes Bottl e Cap s & Clear Pi p in g Tube Support Bra cket Bottle Holder Tray Special Injector Lid Pair of Latex Gl ove s Tube Clip With Adhesi ve Pa d 6 Tube Cla m p s 6 Empt[...]

3 Check Printer C ondi ti on If you have a brand new printer, follow the Epson instruct ions for setting up your printer. Use the Epson cart ridges that ca me wi th the p rinte r. F ollow n ormal ins talla tion in structio ns for the sof tware. Te st the printer by printi ng pictures. Learn how to use the Epson utilities to run a Nozzle patt ern ch[...]

4 INS TALL ATION OF YOUR EC O-FL O KI T Step 1 Remov i n g the Injector Lid You will need to re move the printer lid on the injec tor carrier as shown illustrated f rom the diagrams below. St ore this somewhere safe should you ever wish to return the printer to its original setup. The lid is held in place by t wo ‘ Lugs’ o n either side, on ce [...]

5 Step 2 Moving the Printer Head You are now able to move the printer head manually to the centre area of the printer. See below . Step 3 Bottle Preparation Locate the coloured bott le c aps and st raight l engths of plastic tubes. Insert t he straight t ube f irmly into t he b ott om of each bottle cap see Fig.7 below. Step 4 Tube Preparation Fig.[...]

6 Step 4 Tube Preparation Using a pair of scissors snip gently at t he end of each tube. Please see Fig.8 below. Strip back all the tubes by approx 150mm. Please note when ass embling t he tubes to the bottle caps you may need to strip back more of the tubing in order for the bottles to be seated correctly within the bottle tray. Fig.8 Fig.9 Fig.10[...]

7 Step 5 Preparation of The Clamps & Inks You are now ready to attach the tube clamps to the tube s as indicated in Fig.11 below. Now plea se fill all the bottles with the correct inks; pl ease ensure t hat all ink has b een filled correctly as indicated by the bottle caps that are colour coded, see Fig.12 below. Step 6 Positioning the Ink Bott[...]

8 Step 7 As sembling th e Tubing to th e Bottle Ca ps When you have completed the above proces s insert the correct tubes to the correct ink bottles. PLEASE TAKE CARE when doing this as if this is co nnected i ncorr ectl y there i s no turning back see Fig.13 & Fig.14 Step 8 Priming the Ink Through the Injectors You are now ready to start the i[...]

9 PLEASE E N SURE TH AT TH E WI NG A D APTOR ( TIP O NL Y) IS GE NT LY, BU T M AKES A FIRM SE AL O N THE BA SE OF TH E INJECT OR, DO NO T push the tip into the injec t or as thi s shall split the base of the injector see Fig.16. PLEASE ENSURE that you DOUBLE CHECK that the correct tube is located to the correct i nk bottle before pulling back on th[...]

10 Step 9 Ins talling the Ch ip Block Unit You are now in a position to remove the Epson cartridges from the printer head, see Fig.20 & Fig.21 below. Ensure that you hold the Colour chip block as indica t e d in Fig . 22 and do not t ouch the contacts as thi s c an cause damage or failure. Ensure that you locate the CORRECT chip block mak ing s[...]

11 Step 10 Installing the Chip Support Bars When you have positioned the chip blocks into place you will need to insert and install the support bars as indic at ed the correct w ay up ( A rro w up ) as illustrated in Fig. 24. Please ensure that you insert the bars as illustrated in Fig.25 mak in g s ur e th a t th e G ro o ve is on th e fa r end . [...]

12 Step 11 Install Injectors Please place the set of 6 injectors in the printer car riage that is now parked in the centre of the printer. Carefully align them, and when you are happy the injectors are in position. PLEASE BE C AREFU L NOT TO PUSH TO O HARD, A S THIS W ILL CA US E DAMA GE TO THE INJECT OR & PR INTER HEA D . Pus h t he injectors [...]

13 Align and locate the SLOT in t he R1400 printer head as indicated in Fi g. 32. W hen y ou have installed the spec ial printer lid on the R1400 it should finish and look like Fig.33 with t he tubes moulded in t hat position. Slot wit hin the p rinter head Step 13 Unlocki ng the Tu be Clamps Please ensure that you UNL OCK the white tube clamps on [...]

14 Step 14 I ns t a ll ing t he Ce nt ral Tu be Supp or t B racke t & Aligni n g the T ube s The Tube Support Bracket has Self Adhesive Strips on it. Use an alcohol or c leaning s olution and clean the top of the printer housing where the Tube Support Bracket is going to be attached, see Fig.36. Then make sure the area is dry be fore proceeding[...]

15 Please ensure that the tubing has just enough slack which may need to be adjusted to allow movement of the print head w ithout restrict ion. This can be d one manually b y mo ving the head to the left and right and checki ng th at there is just enough tubing to allow the print head to move freely from left to right, see Fig.39 below. Step 15 I n[...]

16 When you have carefully installed and aligned the tube clip in its correct location, press firmly ensuring that the tube clip i s clicked and stuck down to t he p rinter body, as i llustrated in F ig.42 below. Step 16 Installing the Foam Strip The purpose of the Foam Strip is to ensure that the tubing on the Eco-F lo tr avels under the printer b[...]

17 43mm Position the Foam Strip in its correct location as W hen y ou have placed the right hand side of indicated in Fig.45, You MUST align the Foam Strip t he Fo am Strip, very carefully bend it back to the flush to the edge ensuring that you lightly tack white point as illustrated in Fig.46. the right hand side onto the casing. Now ensure that y[...]

18 Step 17 Testing the System Push the injectors to the far right and plug the print er back on. Have your graphics program ( e. g. Photoshop) open and ready to use. The printer should come on and the head should move back and forth a few times and do a cleaning cycle. When it stops moving, only the green light should b e on. A red light at this po[...]

19 Step 18 Removing the Injecto rs Please note before removing the injectors you MUS T clamp the tubing on the relevant injectors by LOCKI NG the White tube clamps to avoid air traveling up the injector and into the tube. At this po int press t he ink change button on the front panel of the printer so that y ou are r eady to change or remove the in[...]

20 ON THE COMP A C T DIS C : - THERE IS A CD SUPPLIED WITH YO UR KIT. ON THE CD ARE COPIES OF THE FOLLO WING :- 1 ECO-FLO INSTA LLATION INSTR UCTIONS FOR ALL TYPES O F PRINTERS AND SYSTEM S 2 TR OUBLE SHOOT ING GUIDE 3 INK PURGE TEST F ILES AND TONE CHARTS 4 IC C PROFILES FO R USE WITH PERM AJET COLOUR IN K AND PAPER COM BINATIONS 5 C URVES FOR US [...]

21 FAQ»S & Caring For Your Eco-Flo √ READ CAREFULLY!!! Here are some tips to make sure that your new system performs troub le-free. • It is advised to gently shake by r otation each ink bottle on a re gular weekly basis. This is to ensure the XL (Xtra Life) Dye inks stay suspended in solution and gives constant results. • After printing,[...]