Fisher & Paykel WA80T65FW1 FabricSmart Bedienungsanleitung

NZ A U SG Installation instructions and User guide F abricSmart™ clothes washer[...]

Intelligence w orking for you The FabricSmart™ washer is born from 75 years of F isher and Pa ykel laundr y innovation. W ith sophisticated electronics and a revolutionary direct drive motor , it cleans and car es for your clothes as never befor e. Unlike conv entional machines, F abricSmart™ clothes washers use intelligence to continually adap[...]

1 Installation instructions 2 Before y ou do your first wash 5 Getting star ted quickly 6 W ash options How Dirt y , W asher feedback 8 Eco A ctive™ wash 9 Lid lock 10 W ater c onsumption 11 The Lifestyles/Options button Selecting, Customising 12 Options T emperature, W ater Level 13 W ash Advance , Spin, How Dirt y , Delay Start, Drip Dr y, Soak[...]

2 Installation instructions Unpacking T o ensure the best per formance from y our new F abricSmart™ washer please follow the instructions below . Removing the packaging 1 Remove the outer packaging. 2 Tilt the machine backwards and walk it off the bottom packer one foot at a time . 3 Remove the bottom packer fr om under the machine by pulling it [...]

Installation instructions 3 Fig .3 Inlet hose ends Machine end T ap end Inlet hoses Note: new hose sets provided with the machine ar e to be used to connect the washer to the water mains . Old hose sets should not be re-used. 1 C onnect the straight ends of the inlet hoses to the taps (there are washers fitted in both ends). Connect the red connect[...]

Installation instructions 4 W ater supply  F or best operating conditions your hot wat er should be approximately 65°C. Y our hot water should not exceed 75°C or y our cold water exc eed 35°C. T emperatures above these may cause the machine to fault or cause damage to the machine.  If you have an uncon trolled water-heating sour ce ([...]

5 Before y ou do y our first wash Thank you f or buying a Fisher & P aykel F abricSmart™ washing machine. W e are very proud of this washer and trust it will serve you well for man y years. At F isher & Pa ykel we aim to provide inno vative products that are simple t o use, ergonomic and energy efficient. Thousands of tonnes of w ashing a[...]

6  Place load evenly ar ound the agitator (ref er to Sor ting and Loading , page 23).  Remove the fabric softener dispenser . 1 Detergent  F ollow the instructions on the detergent package.  Use the mark on the agitator near est to the top of the clothes as a guide to the correct amount of detergent to use.  Pour the d[...]

7 W ash progr ess As the washer progr esses through the cycle the following symbols will be shown on the displa y screen to indicate pr ogression Filling Eco Active W ash Sensing Wa te r Level Sensing F abric T ype W ash Spray Rinse Deep Rinse Spin Delay Start Getting star ted quick ly 3 7 8 4 Fig .7 F abricSmar t™ clothes washer control panel W [...]

8 How Dirty? Y our F abricSmar t™ washer will automatically choose the medium soil level (three HOW DIRTY bars). This setting has been designed f or your average , everyday load. Howev er , some loads may need more or less washing depending on the amount of soil on the clothes. F or example, a load of dirt y jeans will need the soil level increas[...]

9 Eco A ctive ™ wash The Eco Active™ wash, is a unique washing method that uses a combination of fr ont loader and top loader washing technologies . This dual action wash gives exc ellent wash per formance and means you retain the con venience and capacity of a top loading machine while introducing the gentle cascade wash action and energy effi[...]

10 Y our F abricSmar t™ has a lid lock, which locks when your machine is spinning. This ensures the lid cannot be opened during hazardous parts of the c ycle, pro viding added safety for you and your family . A Lid lock symbol ( ) appears in the corner of the screen when locked (it disappears when unlocked), letting you know at a glance if you ca[...]

11 W ater consumption Hot water c onsumption Differenc es in hot water for a W arm/Cold wash. Machine size * Load size Eco Active™ w ash T raditional wash † Large 5 Kg 13 L 33 L 3 Kg 10 L 23 L 1 Kg 7 L 13 L Medium 5 Kg 12 L 29 L 2.5 Kg 9 L 23 L 0.7 Kg 6 L 12 L * T o check what size your washer is, look on the r ear of the topdeck where the word[...]

12 F abricSmart™ allows you to customise your wash by using the f ollowing menus: OPTIONS; LIFEST YLES; W ASH ADV ANCE and TEMPERA TURE. 1 OPTIONS – allows you t o select different wash settings for y our wash (refer below). 2 LIFEST YLES – is a range of specially designed cycles to make washing ev en easier (refer to page 19). 3 W ASH ADV AN[...]

13 F or all the options mentioned below you firstly need to ent er the OPTIONS menu (touch , and select OPTIONS). Use the and buttons to mov e through the options until the one you want is highlighted. T ouch to select it or to go back to the previous step . T emperatur e Cold Cold+ W arm/Cold Wa r m Warm/Hot Hot Incoming water from tap 20°C 35°C[...]

14 W ash Advanc e Use W ASH ADV ANCE to advance the cycle or to start the c ycle at a particular stage. This is a good option if you only want to use part of the cycle, eg the rinse and spin, or prewash. Please r efer to page 22 for more detail . Note: you can also acc ess this option from the wash options screen (touch the button). Spin This optio[...]

15 Save W ater F abricSmart™ provides an excellent opportunity to save water , with two water saving options available: 1) the traditional SA VE W A TER option, and 2) the ECO (SA VE W A TER++) option. SA VE W A TER minimises the amount of water used. The rinse type your washer chooses depends on the type of fabric you are washing and the options[...]

16 After using your F abricSmart™ washer you may want to fine-tune some of the options to suit your wash needs. T o access the Settings menu:  T ouch , selec t OPTIONS and then SET TINGS. The SET TINGS menu will then be displayed .  Select the option you wish to adjust.  Adjust the option to y our preferred setting, then touch .[...]

17 Adjusting the w ash settings Default Rinse This menu changes the rinse option that is automatically selected when you first turn your machine on. Spray and Deep is the default rinse. Y ou may wish t o change the type of rinse selected for a number of reasons. If you ha ve a problem with impurities in your wa ter supply you may get a better wash [...]

18 Y our machine lef t the factor y with the Machine Stops Action set as the default. T o set your machine to Automatic Reco very :  Access the SET TINGS menu (refer t o page 16).  Select OUT OF BALANCE RECOVERY .  Select ON.  Automatic Reco very is now ac tivated. End of C ycle Beeps The beeps signalling the end of the cycl[...]

19 2. Lifestyles Y our F abricSmar t™ has a range of specially designed Lifestyles cycles to make washing even easier . 1 T ouch the button, select LIFEST YLES. The LIFESTYLES menu will be displayed. 2 S elec t a Lifestyles menu of your choice , eg F AMIL Y . Note: W A10T65F and W A85T60F default to a cold water temperatur e. Y ou can manually ad[...]

20 F av ourite The F A VOURITE cycle lets you sav e wash settings for your ideal wash cycle . Y our F A VOURITE cycle can include most wash options and it can start from any point in the cycle. F or instance, it may be a cycle to wash your gym gear or it may be a rinse and spin to rinse out swimsuits. T o save your F A VOURITE cycle 1 S elec t all [...]

21 Sports Sweat y The clothes you ex ercise in require a little extra care to remo ve the odours and dirt that tend to penetrate int o the fabric structure. This cycle incorporates a warm/hot regular w ash with a fast spin to clean sweaty sports clothes. Muddy Clothes that have mud on them need t o be washed in a special way so all traces can be re[...]

22 W ash Advance and T emperatur e Fruit/W ine It is impor tant to treat these stains immediately with soda w ater if you hav e it, or cold water . The FRUIT/WINE cycle will finish off the process. Some detergen ts contain colour-safe bleaches , that would be ideal here as the higher temper atures in the Eco Active™ wash activate the bleaches . T[...]

23 Sor ting and loading T o get the best wash results it pays to sort your clothes befor e washing. Care labels Care labels will tell y ou about the fabric of the garment and how it should be washed. Read them carefully . Soil Sor t clothes according t o the type and amount of soil. Some soils suit warmer washes (eg oily soils), while others are be[...]

24 W ashing difficult items W ashing woollens The WOOL cycle is for washing MA CHINE W ASHABLE woollens . The fibres of these woollens ha ve been treated to pr event felting when they ar e machine -washed. Most hand knitted garments are not made of machine washable wool and we r ecommend that you wash them by hand .  Check the care label. [...]

25 Detergen t Choosing the right detergen t W e recommend the use of domestic detergen ts (powder or liquid) only . Soap flakes or granulated soap pow ders should not be used. Detergents that con tain built-in fabric softeners may not be suitable for your F abricSmart™ as they can leave deposits on the agita tor and bowl. How much detergen t? The[...]

26 Detergen t How much to use? Conc entrate P ow der Machine size Medium Large W ater level/load Number of scoops High 1  /  scoops 1 ½ scoops Medium high 1 heaped scoop 1 /  scoops Medium 1 scant scoop 1 scoop Medium low  /  scoop ¾ scoop Low ¼ scoop /  scoop Standard pow der Machine size Medium Large W ater level/load B[...]

27 F abric sof tener How the fabric softener is dispensed The fabric softener goes into the dispenser on the top of the agitator . During rinse the machine spins to release the fabric softener , delivering it down the agita tor stem as the machine fills for the final deep rinse. Note: the SA VE W A TER and EC O (SA VER W A TER++) r inse options are[...]

28 Caring f or your clothes washer When you ha ve finished the cycle  T urn off the taps to prev ent the chance of flooding should a hose burst.  Unplug the machine from the wall socket. Cleaning your F abricSmar t™ Before y ou star t cleaning your F abricSmart™ washer , ensure that it is turned off at the wall .  Use a soft d[...]

29 Machine information Specifications Machine size Depth/Width Height * Height (lid open) Large 650 mm 1020 – 1050 mm 1410 – 1440 mm Medium 600 mm 1020 – 1050 mm 1360 – 1390 mm * Height is measured to the highest point on the console. Note: exact height of your F abricSmart™ is dependent on how far the feet are inserted into the base of t[...]

30 If your F abricSmar t™ beeps for help Before y ou call for service Please read the f ollowing pages before calling f or ser vice. Y ou can correct many of your machine ’ s problems using the checklists on the following pages. Y our machine is capable of diagnosing its own problems and if it has a problem it will beep and display a message te[...]

31 If your F abricSmar t™ beeps for help “I am not getting any W A TER ” The taps have not been turned on. Inlet hose screens may be blocked. The hoses may be kinked (refer to page 3). The drain hose is too low or the dr ain hose is pushed into the standpipe too far and the water is siphoning out of the machine (see Installations Instruc tion[...]

32 Operating pr oblems Pressing POWER does not turn the machine on. Is the power switched on at the w all? Unplug the machine from the wall. Wait 60 seconds, plug back in and turn the pow er back on again. Could your household po wer supply be at fault? T ry plugging in another electrical appliance. Pressing ST ART/P AUSE does not start the fill. A[...]

33 All about wash pr oblems Listed below are possible causes and solutions t o some common wash problems. CREASING. Overloading the washer or dr yer . Select EASY IRON as this will change the rinse and selec t a slower , shor ter spin speed (page 19). Or change the fast spin speed from 1000 rpm to 670 rpm (ref er to Spin, page 14). Do not leave wet[...]

34 Manufac turer’ s W arranty Y ou automatically receive a 2 y ear Manufacturer ’ s W arranty with the purchase of this Product cov ering par ts and labour for servicing within the country of purchase. Fisher & P ayk el under takes to: Repair or , at its option, replac e without cost to the owner either for mat erial or labour any part of T[...]

35 Manufac turer’ s W arranty E Normal recommended maintenance as set out in the product’ s user guide . F R epairs when the appliance has been dismantled, r epaired or serviced by other than a Fisher & P aykel authorised repair er or the selling dealer . G Pick-up and delivery . H T ransportation or travelling costs inv olved in the repair[...]

36 Cust omer Car e Before y ou call for service or assistance… Check the things you can do yourself . Refer to your U ser Guide and check: 1 Y our appliance is correctly installed. 2 Y ou are familiar with its normal operation. 3 Y ou have read the pr oblem solving section at the back of the book . If after check ing these points you still need a[...]

37 Cust omer Car e Product details Fisher & P aykel Appliances , Ltd Model/Serial No. Date of Pur chase Purchaser Dealer Suburb T own Country[...]

NZ A U 05.2011 F&P PN - 424120 www.fisherpaykel .co.nz www.fisherpaykel .com.au www.fisherpaykel .com.sg Copyright © F isher & Paykel 2011. All rights r eserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these spec[...]