Ford MKT Bedienungsanleitung

Introduction 4 Instrument Cluster 12 W arning lights and chimes 12 Gauges 17 Message center 18 Entertainment Systems 32 Setting the clock 40 AM/FM 41 CD 44 Playing a DVD in the system 45 Jukebox features 46 Accessing the help screen 51 Auxiliary input jack (Line in) 59 USB port 61 Satellite radio (if equipped) 64 Family entertainment system 67 Navi[...]

Locks and Security 150 Locks 151 Anti-theft system 165 Seating and Safety Restraints 176 Seating 176 Safety restraints 197 Airbags 211 Child restraints 226 Tires, Wheels and Loading 244 T ire information 246 T ire inflation 248 T ire Pressure Monitoring System (TPMS) 261 V ehicle loading 267 T railer towing 273 Recreational towing 278 Driving 279 S[...]

Customer Assistance 361 Reporting safety defects (U.S. only) 367 Reporting safety defects (Canada only) 367 Cleaning 368 Maintenance and Specifications 376 Engine compartment 378 Engine oil 382 Battery 385 Engine coolant 388 Fuel information 394 Air filter(s) 409 Part numbers 411 Maintenance product specifications and capacities 412 Engine data 415[...]

CONGRATULATIONS Congratulations on acquiring your new Ford Motor Company product. Please take the time to get well acquainted with your vehicle by reading this handbook. The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it. For more information on Ford Motor Company and its product[...]

Protecting the environment W e must all play our part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps towards this aim. Information in this respect is highlighted in this guide with the tree symbol. CALIFORNIA Proposition 65 W arning W ARNING: Engine[...]

SPECIAL NOTICES New V ehicle Limited W arranty For a detailed description of what is covered and what is not covered by your vehicle’ s New V ehicle Limited W arranty , refer to the Warranty Guide/Customer Information Guide that is provided to you along with your Owner’ s Guide. Special instructions For your added safety , your vehicle is fitte[...]

Event Data Recording Other modules in your vehicle — event data recorders — are capable of collecting and storing data during a crash or near crash event. The recorded information may assist in the investigation of such an event. The modules may record information about both the vehicle and the occupants, potentially including information such [...]

information”) only to help provide you with the directions, traffic reports, or business searches you request. If you do not want Ford or its vendors to receive this information, do not activate the service. Ford Motor Company and the vendors it uses to provide you with this information do not store your vehicle travel information. For more infor[...]

EXPORT UNIQUE (NON–UNITED STATES/CANADA) VEHICLE SPECIFIC INFORMATION For your particular global region, your vehicle may be equipped with features and options that are different from the features and options that are described in this Owner’ s Guide. A market unique supplement may be supplied that complements this book. By referring to the mar[...]

These are some of the symbols you may see on your vehicle. V ehicle Symbol Glossary Safety Alert See Owner’ s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat Lower Anchor Child Seat T ether Anchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid - Non-Petroleum Based Parking Aid System Stability Control System[...]

V ehicle Symbol Glossary Power W indows Front/Rear Power W indow Lockout Child Safety Door Lock/Unlock Interior Luggage Compartment Release Panic Alarm Engine Oil Engine Coolant Engine Coolant T emperature Do Not Open When Hot Battery A void Smoking, Flames, or Sparks Battery Acid Explosive Gas Fan W arning Power Steering Fluid Maintain Correct Flu[...]

W ARNING LIGHTS AND CHIMES W arning lights and gauges can alert you to a vehicle condition that may become serious enough to cause extensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’ s functions. Many lights will illuminate when you start your vehicle to make sure the bulbs work. If any light remains [...]

Engine coolant temperature (R TT): Illuminates when the engine coolant temperature is high. Stop the vehicle as soon as possible, switch off the engine and let cool. Refer to Engine coolant in the Maintenance and Specifications chapter . W ARNING: Never remove the coolant reservoir cap while the engine is running or hot. Low fuel (R TT): Illuminate[...]

Solid illumination after the engine is started indicates the On Board Diagnostics System (OBD-II) has detected a malfunction. Refer to On board diagnostics (OBD-II) in the Maintenance and Specifications chapter . If the light is blinking, engine misfire is occurring which could damage your catalytic converter . Drive in a moderate fashion (avoid he[...]

Airbag readiness: If this light fails to illuminate when the ignition is turned on, continues to flash or remains on, have the system serviced immediately by your authorized dealer . A chime will sound if there is a malfunction in the indicator light. Safety belt: Reminds you to fasten your safety belt. A Belt-Minder 威 chime will also sound to re[...]

Adaptive cruise control (ACC) (if equipped): Illuminates when ACC is engaged while following a vehicle. Refer to Adaptive cruise control in the Driver Controls chapter for more information. Speed control: Illuminates when the speed control is engaged or when the ACC is engaged without following a vehicle. T urns off when the speed control system is[...]

Message center activation chime: Sounds when some warning messages appear in the message center display for the first time. GAUGES Speedometer: Indicates the current vehicle speed. Engine coolant temperature gauge: Indicates engine coolant temperature. At normal operating temperature, the needle will be in the normal range (between “H” and “C[...]

W ARNING: Never remove the coolant reservoir cap while the engine is running or hot. Fuel gauge: Indicates approximately how much fuel is left in the fuel tank (when the ignition is on). The fuel gauge may vary slightly when the vehicle is in motion or on a grade. The FUEL icon and arrow indicates which side of the vehicle the fuel filler door is l[...]

The message center display is located in the instrument cluster . Info Press the INFO button repeatedly to cycle through the following features: TRIP A/B Registers the distance of individual journeys. Press and release INFO until the A or B trip appears in the display (this represents the trip mode). Press and hold RESET until it resets. Refer to U[...]

• V ariations in top-off procedure from one fill-up to another • Rounding of the displayed values to the nearest 0.1 gallon (liter) T o determine your average highway fuel economy , do the following: 1. Drive the vehicle at least 5 miles (8 km) with the speed control system engaged to display a stabilized average. 2. Record the highway fuel eco[...]

1. P ASSIVE ENTRY P ASSIVE ST ART (PEPS) 2. OIL LIFE 3. W ASHER FLUID LEVEL 4. DOOR AJAR ST A TUS 5. LIFTGA TE ST A TUS 6. BRAKE SYSTEM 7. TIRE PRESSURE 8. BLIND SPOT SYSTEM (if equipped) 9. CROSS TRAFFIC SYSTEM (if equipped) 10. ADAPTIVE CRUISE CONTROL (ACC) (if equipped) 11. P ARK AID 12. FUEL LEVEL 13. MYKEY DIST ANCE (if MyKey™ is programmed)[...]

UNITS Displays the current units in English or Metric. Press RESET to change between English and Metric. AUTO HIGH BEAM (if equipped) This feature automatically turns on your high beams if it is dark enough and no other traffic is present. Press RESET to turn it off or on. AUTOLAMP This feature keeps your headlights on for up to three minutes after[...]

Press RESET to turn the collision warning system on or off. The system will revert to on each time the vehicle is started. The heads up display and/or chime will activate briefly to confirm the last setting. BLIND SPOT (if equipped) The Blind Spot Information System (BLIS 威 ) is designed to assist the driver by monitoring the side areas of the ve[...]

Press and hold RESET for two seconds to set the language choice. System warnings System warnings alert you to possible problems or malfunctions in your vehicle’ s operating systems. In the event of a multiple warning situation, the message center will cycle the display to show all warnings by displaying each one for four seconds. The message cent[...]

CHECK BRAKE SYSTEM — Displayed when the brake system needs servicing. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible. LIFTGA TE AJAR — Displayed when the liftgate is not completely closed. Press RESET to reset display . CHECK P ARK AID (if equipped) — Displayed when the transmission is in R[...]

A WD OFF (if equipped) — Displayed when the A WD system has been automatically disabled to protect itself. This is caused by operating the vehicle with the compact spare tire installed or if the system is overheating. The A WD system will resume normal function and clear this message after driving a short distance with the road tire re-installed [...]

COLLISION W ARN MALFUNCTION (if equipped) — Displayed when there is a system malfunction with the collision warning system. The system will be disabled. COLLISION W ARN NOT A V AILABLE (if equipped) — Displayed when there is a system malfunction with the collision warning system. The system will be disabled. COLLISION W ARN NOT A V AILABLE SENS[...]

KEY PROGRAMMED 4 KEYS TOT AL (if equipped) — Displayed during spare key programming, when a fourth Intelligent Access Key is programmed to the system. MAX # OF KEYS LEARNED (if equipped) — Displayed during spare key programming, after a fourth Intelligent Access Key is programmed or upon entering spare key programming mode with four Intelligent[...]

BLIND SPOT SYSTEM F AUL T (if equipped) — Displayed when a fault with the blind spot information system has a fault. Contact your authorized dealer as soon as possible. CROSS TRAFFIC SYSTEM F AUL T (if equipped) — Displayed when a fault with the cross traffic alert system has a fault. Contact your authorized dealer as soon as possible. BLIND SP[...]

CANCELLED BY ADV TRAC EVENT (if equipped) — Displayed when the active park feature has been canceled due to the AdvanceT rac 威 system activating. Refer to Active park assist in the Driving chapter for more information. CANCELLED BY ABS EVENT (if equipped) — Displayed when the active park feature has been canceled due to the ABS activating. Re[...]

SER VICE ADV ANCETRAC — Displayed when the AdvanceT rac 威 system has detected a condition that requires service. TO STOP ALARM ST AR T VEHICLE — Displayed when the perimeter alarm system is armed and the vehicle is entered using the key on the driver’ s side door . In order to prevent the perimeter alarm system from triggering, the ignition[...]

AUDIO SYSTEMS Note: If your volume is muted and MYKEY VOLUME LIMITED is displayed, refer to MyKey™ in the Locks and Security chapter for more information. Mobile media system W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any devi[...]

1. I (Information): Press to access the information menu. Press while the information menu is active to step through the information tabs of: the Calendar , System Info (System Information) and Help. 2. PHONE: Press PHONE to access SYNC 威 phone features. Refer to your SYNC 威 supplement for more information. 3. CLIMA TE: Press CLIMA TE to access[...]

In CD/DVD, Jukebox or User device mode, press / to access the previous/next track or chapter . 9. SHUFFLE: Press to shuffle the songs on the current CD, Jukebox or User Device. 10. SCAN: Press for a brief sampling of radio stations, satellite radio channels, CD, Jukebox or User Device tracks. 11. VOL (On/off/volume): Press to turn the system on/off[...]

17. CD/DVD slot: Insert a CD or DVD, label side up. After the system initializes, the screen will be divided in two sections: • Status bars: This is the top and bottom portion of screen that displays the clock or date and useful information, depending on the current mode. • Display area: The interactive screen that is activated by finger touch [...]

Loading pictures Y our system allows you to save and view up to 32 photos. T o access: 1. Ensure that you are on the Home Screen. (Press at the bottom left of any screen to access.) 2. T ouch the left side of the home screen to initiate the left screen photo display and saved photos screen. 3. Select the ‘Add’ button on the touchscreen. The fol[...]

• Up to 256 files or folders can be displayed in one folder . • Not compatible with discs written in Packet W rite mode. • Only the photograph(s) which meet these conditions will be displayed. Note: When burning a CD, ensure that you ‘close’ or ‘finalize’ the disc when the CD-burning process finishes (you should select this option bef[...]

System menu features Y our system has many menu features such as allowing you to adjust the touchscreen brightness, adjusting the time and languages, adjusting the feedback and system settings. T o access, press the MENU hard button. Display options 1. Press the MENU hard button. 2. Select the ‘Display’ tab on the touchscreen. Select from the f[...]

System settings 1. Press the MENU hard button. 2. Select the ‘System Settings’ tab on the touchscreen. Select from the following display options: Language: Select between ‘English’, ‘Francais’ or ‘Espanol’. Units: Select between ‘English’ and ‘Metric’. Keyboard layout: Select ‘ABC’ or ‘QWERTY’ for the keyboard layout[...]

3. Enter a four digit Personal Identification Number (PIN) and press ‘Enter’. The system will ask you to re-enter the PIN. Once entered, select ‘Enable’ to activate V alet mode. The system is then locked until the correct four digit PIN is entered. Note: The PIN can be reset by simultaneously pressing and holding presets 1 and 5 while on th[...]

THX audio system — if equipped Y our vehicle may be equipped with the THX 威 certified premium audio system. This system creates optimal acoustic quality for all seating positions and road conditions. The system offers an advanced speaker system, amplifier , subwoofer and equalizer . AM/FM 1. Ensure that the system is on. 2. Press the RADIO hard[...]

• Autoset Presets: The autoset feature allows you to set strong radio stations without losing your original preset stations. This feature is helpful on trips when traveling between cities with different radio stations. T o enable, select AUTOSET PRESETS and the six strongest stations in your current area will be set as presets. T o return to your[...]

4. Press ‘Show Options’ to select from: Sat 123: Y ou will be able to access three different Satellite Radio modes, SA T1, SA T2 and SA T3. Scan: Press to hear a brief sampling of satellite radio channels within the currently selected genre. Press again to stop. Scan Presets: Press to hear a brief sampling of all preset channels. Channel Guide:[...]

• Song Alert: Press to store the song information displayed in the T itle Field. When the stored song is played in the future, an audio and visual notification will be initiated. • Artist Alert: Press to store the artist information currently displayed in the Artist Field. When that artist is played again, the system will alert you with a pop-u[...]

Folder List: A vailable in MP3 mode only . Press to access/view a list of folders on the disc. Select the root folder (if available). Y ou may then select from all possible folders on the disc. : Press to access the previous track. Press and hold to reverse in the current track. / (Play/Pause) : Press to play or pause the current track. : Press to [...]

Search: Press to select and go to a specific title or chapter using the keypad. Settings: Allows you to adjust the certain settings of the DVD player , such as: • V ideo Display Settings: Press to adjust the brightness and contrast. Y ou can also choose to return to the default settings by pressing ‘Restore Default’. • Audio Language: Press[...]

display of song title, album title, and album cover art. After saving music to the hard drive, you can access and play your music by specific tracks, artists, albums or genres. Y ou can even choose to create and access your own playlists. *Note: 1 GB equals one billion bytes (1,000,000,000B). Recording (saving) music to your jukebox 1. Ensure that [...]

2. Select the ‘Jukebox’ tab on the touchscreen. Y ou can then select from the following options: Scan: Press for a brief sampling of the currently selected CD, playlist, genre, etc. Press again to disengage. Repeat: Press to repeat the current CD, playlist, etc. Press again to disengage. Shuffle: Press to shuffle all the tracks on the current C[...]

Creating a playlist 1. Press the MEDIA hard button. 2. Select the ‘Jukebox’ tab on the touchscreen. 3. Select ‘Options’. 4. Select ‘Edit Playlists’. 5. Select which playlist you would like to create. 6. Select which category you would like to access from your saved music. For example, say you chose one saved album from which to select s[...]

/ (Play/Pause): Press to play or pause the current track. Rear Zone (if equipped) This screen allows front seat passengers to select/listen to a different audio/video source than the back seat passengers. The only restriction is that the front and back seat passengers cannot both listen to a different frequency band (AM/FM1/FM2). The frequency band[...]

Calendar • Press the I button and then select the ‘Calendar’ tab. Y ou can then select which month you would like to view by pressing / or you can also select ‘Go to T oday’. • Y ou are able to view calendars from one previous year and the next 10 years. Note: Not all tab selections shown here will be available in all markets. Check wit[...]

Select ‘Basic Operation’ at the top of the screen to view the hard buttons on your mobile media system. Press the desired icon to view the button description. Select ‘Driving Restriction’ at the top of the screen to view the system’ s driving restriction. Select ‘SYNC V oice Commands’ at the top of the screen. When selected, the syste[...]

Sound features The sound menu allows you to access and adjust settings such as Bass, T reble, Fade, Balance, Digital Signal Processing (DSP), Speed compensated volume (SCV) and the visualizer . T o access: 1. Press the SOUND hard button. 2. Press the appropriate tab to select from: Bass/T reble: Press + to increase or — to decrease the levels. Ba[...]

DSP (Digital Signal Processing): Depending on your option package, you may either select from ‘Stereo’ or ‘Surround Sound’. Or , you may choose to optimize the sound quality for ‘All Seats’, ‘Driver Seat’ or ‘Rear Seat’. V isualizer: Press to turn the audio visualizer display on or off. Note: T urning the visualizer setting to o[...]

Ordering Gracenote update DVDs If you wish to order an updated DVD, please contact Ford Customer Service. • In USA: 1 (800) 392–3673 • In Canada: 1 (800) 565–3673. • In Mexico: 1 (800) 719–8466 System Software Updates Updates for the Gracenote database (CDDB) that contain CD song/artist/title/album art are available. There is no charge [...]

Gracenote End User License Agreement (EULA) This device contains software from Gracenote, Inc. of 2000 Powell Street Emeryville, California 94608 (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this device to do disc and music file identification and obtain music-related information, including name, artist, tra[...]

THE GRACENOTE SOFTW ARE, EACH ITEM OF GRACENOTE DA T A AND THE GRACENOTE CONTENT ARE LICENSED TO YOU “AS IS.” NEITHER GRACENOTE MAKES ANY REPRESENT A TIONS OR W ARRANTIES, EXPRESS OR IMPLIED, REGARDING THE ACCURACY OF ANY GRACENOTE DA T A FROM THE GRACENOTE SERVERS OR GRACENOTE CONTENT . GRACENOTE COLLECTIVEL Y AND SEP ARA TEL Y RESER VE THE RI[...]

Frequently asked questions (F AQs) How do I turn off the system? Press and hold the volume control for at least three seconds. How do I recover after accidental language re-set? 1. Press the MENU hard button. 2. Select the ‘Feedback settings’/Retour/Reaccion tab on the touchscreen. 3. Press the ‘English’/Anglais/Ingles button to reset langu[...]

Audio system–Navigation system based (if equipped) If your vehicle is equipped with the navigation system, it will have an integrated navigation/audio system. See the Navigation system supplement for operating instructions on using this audio system. Auxiliary input jack (Line in) W ARNING: Driving while distracted can result in loss of vehicle c[...]

4. T urn the radio on, using either a tuned FM station or a CD loaded into the system. Adjust the volume to a comfortable listening level. 5. T urn the portable music player on and adjust the volume to 1/2 the volume. 6. Press AUX on the vehicle radio repeatedly until LINE, LINE IN or SYNC LINE IN appears in the display . Y ou should hear audio fro[...]

USB port W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road. The driver’ s primary responsibility is the safe operation of their vehicle. Only use cell phones and other devices not ess[...]

CD/CD player care Do: • Handle discs by their edges only . (Never touch the playing surface). • Inspect discs before playing. • Clean only with an approved CD cleaner . • W ipe discs from the center out. Don’t: • Expose discs to direct sunlight or heat sources for extended periods of time. • Clean using a circular motion. CD units are[...]

CDs with homemade paper (adhesive) labels should not be inserted into the CD player as the label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ballpoint pens may damage CDs. Please contact your authorized dealer for further information. Audio[...]

Sample MP3 structure If you are burning your own MP3 discs, it is important to understand how the system will read the structures you create. While various files may be present, (files with extensions other than mp3), only files with the .mp3 extension will be played. Other files will be ignored by the system. This enables you to use the same MP3 d[...]

Satellite radio reception factors: Y our satellite radio antenna is located on the roof of your vehicle as this provides the best location for an unobstructed, open view of the sky . Factors that can affect satellite radio reception performance are: • Antenna Obstructions: For optimal reception performance, keep the antenna clear of snow and ice [...]

Radio Display Condition Action Required ACQUIRING Radio requires more than two seconds to produce audio for the selected channel. No action required. This message should disappear shortly . SA T F AUL T Internal module or system failure present. If this message does not clear within a short period of time, or with an ignition key cycle, your receiv[...]

Radio Display Condition Action Required NO SIGNAL Loss of signal from the SIRIUS satellite or SIRIUS tower to the vehicle antenna. Y ou are in a location that is blocking the SIRIUS signal (i.e., tunnel, under an overpass, dense foliage, etc). The system is working properly . When you move into an open area, the signal should return. UPDA TING Upda[...]

Quick start Y our family entertainment system includes two headrest-mounted DVD player/screens, two sets of wireless infrared (IR) headphones and a wireless infrared (IR) remote control capable of controlling either DVD player . Both DVD players are capable of playing their own independent media, or they can both watch the same media. When in singl[...]

T o play a CD or MP3 disc The DVD system can play audio CDs, CD-R and CD-R/W , CD-ROM. T o ensure proper disc operation, check the disc for finger prints and scratches. Clean the disc with a soft cloth, wiping from the center to the edge. 1. Insert a disc into the system, label side facing the rear passengers. The disc slot indicator lights will il[...]

• USB port (4): T o access, ensure that the monitor is already selected as the media source (Monitor A or Monitor B.) Then, plug in your flash/thumb drive and it will automatically begin to play . The system will try to play whatever file it comes to first (slideshow of pictures, etc). If it is a supported file type, it will play . If it is not s[...]

DVD player controls 1. / (Play/Pause): Press to play or pause a CD, DVD or flash/thumb drive track. 2. (Stop): Press to stop the current DVD, CD/MP3, or flash/thumb drive track. 3. (Eject): Press to eject a disc from the DVD system. 4. MENU: When playing a DVD, press MENU to enter the DVD disc (root) menu (if available). Press again to exit and ret[...]

5. / (Headphones/Speakers): Press to activate dual play mode on either headrest system. During dual play mode, the following happens: a. Rear speakers turn off b. Headphones become active on both headrest systems. c. Media sources become available through the DVD systems. Note: If the system is in dual play mode, you must press the / (Headphones/Sp[...]

Remote control Unless otherwise stated, all operations can be carried out with the remote control. Always point the remote control directly at the player . Ensure that there are no obstructions between the remote and player . Press the MON A B control to select either Monitor A or Monitor B. Note: Each headrest monitor is labeled with an identifier[...]

4. RETURN: Press to return to the previous menu screen. 5. SETUP : Press to access the setup menu for each monitor . Refer to Setup Menu later in this section for more information. 6. MON A/B: Press to select either monitor A or monitor B to be controlled by the remote control. 7. VOL (V olume): When in Dual Play only , press to increase ( )o r dec[...]

MEDIA for Monitor B: In Dual Play mode, press MEDIA repeatedly to select from the possible media sources: (Monitor A, Monitor B). The selected media type will display on the screen. When Monitor B is chosen, you can also use the auxiliary inputs and USB port on the headrest system. For further information, please refer to Single play/Dual play . la[...]

Battery replacement Batteries are supplied with the remote control unit. Since all batteries have a limited shelf life, replace them when the unit fails to control the DVD player . Remove the screw and unlatch the battery cover to access the batteries. The remote control unit uses two AAA batteries which are supplied with the unit. Headphones Wirel[...]

Additional infrared wireless headphones may be purchased for use with the system. Also, wired headphones may be purchased and plugged in where indicated on the left and right hand sides of the system. Refer to Wired Headphones following. T o install the batteries, remove the screw on the cover and remove the cover . Then, gently lift the top of the[...]

• Adjust the volume control to the desired listening level. Ensure that the headphones are turned off when not in use. After approximately one minute of not being in use (no infrared signal is received), the wireless headphones will automatically turn off. They will also turn off after two hours of continuous use as a power save feature. If this [...]

Dual Play: Dual play is when the rear seat passengers choose to listen to a different playing media than the front seat passengers. W ith the DVD and rear seat controls turned on, the rear seat passengers may choose to listen to: Monitor A, Monitor B, AM, FM1, FM2 SR1, SR2, SR3 (satellite radio, if equipped), Disc, Jukebox (if equipped), or SYNC ?[...]

Radio interaction: If your vehicle is equipped with a non-touchscreen audio system, you can press AUX on the radio repeatedly until DVD appears in the display . Then, press MENU to access HEADPHONES ON/OFF , REAR ZONE CONTROL ON/OFF and other options. T urn the TUNE control to select ON/OFF for HEADPHONES (ON will activate Dual Play and OFF will ac[...]

Aspect ratio (TV display type) This screen allows you to select the viewing size and shape of the video displayed on the LCD screen. This is disc dependent feature. T o access: 1. Press SETUP on the remote to access the menu options. 2. Press / to ’highlight’ the monitor icon. (A disc will appear beneath the icon signifying it is the current se[...]

2. Press / to ’highlight’ the monitor icon. (A disc will appear beneath the icon signifying it is the current selection.) 3. Press to select and enter the OSD language menu. 4. When OSD Lang is highlighted, press to access the menu. 5. Press / to select from all available languages. 6. When the desired language is highlighted, press ENTER on th[...]

Speaker setup This screen allows you to adjust the audio balance for your speakers. T o access: 1. Press SETUP on the remote to access the menu options. 2. Press / to ’highlight’ the speaker icon. (A disc will appear beneath the icon signifying it is the current selection.) 3. Press to select and enter the Speaker set up menu. 4. When Downmix i[...]

4. Press / to chose from Sharpness, Brightness, contrast, color (gamma), hue, saturation and luma-delay . General setup — screen exit T o exit the setup screen: 1. Press / to ’highlight’ the “X” icon. (A disc will appear beneath the icon signifying it is the current selection.) 2. Press ENTER on the remote control. Parental control for th[...]

General information Note: DVDs are formatted by regions. US and Canada systems can only play region 1 DVDs and Mexico systems can only play region 4 DVDs. Systems sold in vehicles targeted for other parts of the world would have different regions. If a playback problem is encountered, please ensure that you are using a disc designed for your vehicl[...]

Read all of the safety and operating instructions before operating the system and retain for future reference. Do not attempt to service, repair or modify the Family Entertainment System (FES). See your dealer . Do not insert foreign objects into the DVD compartment. W ARNING: Do not leave children unattended in the vehicle and do not let children [...]

Federal Communication Commission (FCC) Compliance Changes or modifications not approved by Ford Lincoln-Mercury could void user’ s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonabl[...]

Foreign substances Exercise care to prevent dirt and foreign objects from entering the DVD player compartment. Be especially careful not to spill liquids of any kind onto the media controls or into the system. If liquid is accidentally spilled onto the system, immediately turn the system OFF and consult a qualified service technician. Cleaning the [...]

DUAL ZONE AUTOMATIC T EMPERATURE CONTROL Climate system without navigation system shown; with navigation similar . T emperature conversion: T o switch between Fahrenheit and Celsius, refer to Message center in the Instrument Cluster chapter . 1. Climate: Press to control the climate control system through the touch display screen. See T ouchscreen [...]

6. Defrost: Distributes outside air through the windshield defroster vents and de-mister vents. Can be used to clear the windshield of fog and thin ice. The system will automatically provide outside air to reduce window fogging. Press this button again to return to the previous air flow selection. 7. Power: Press to activate/deactivate the climate [...]

T OUCHSCREEN FUNCTIONS T emperature – Press the up and down arrows on the left side of the screen to increase/decrease the airflow temperature for the driver side of the vehicle. This control also adjusts the passenger side temperature when dual zone operation is disengaged. Press the up and down arrows on the right side of the screen to increase[...]

Max A/C – Distributes recirculated air through the instrument panel vents to cool the vehicle. This re-cooling of the interior air is more economical and efficient. Recirculated air may also help reduce undesirable odors from entering the vehicle. Press MAX A/C again for normal operation. Rear Zone Power – Press to activate/deactivate the rear [...]

• Remove any snow , ice or leaves from the air intake area at the base of the windshield. For maximum cooling performance (MAX A/C): In AUTO mode, press AUTO control and set to desired temperature. In manual override mode, select or , A/C and recirculated air and set the temperature to 60°F (16°C). Set the fan to the highest speed initially , t[...]

• OO f f : Select to shut the rear climate system off • AUTO: Select to activate automatic control of the fan speed. The system will automatically determine fan speed in order to reach and maintain the desired temperature. 2. Rear driver side heated seat control (if equipped): Press to activate. Refer to Heated and cooled seats in the Seating a[...]

REAR WINDOW DEFROSTER R The rear defroster control is located on the climate control panel and works to clear the rear window of fog and thin ice. The ignition must be on to operate the rear window defroster . The rear defroster turns off automatically after 10 minutes or when the ignition is turned off. T o manually turn off the defroster before 1[...]

HEADLAMP CONTROL T urns the lamps off. T urns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. T urns the low beam headlamps on. Adaptive headlamps The headlamp beams move in the same direction as the steering wheel which provides more visibility when driving around curves. • W ithout adaptive headlamps (1) • W [...]

Autolamp control The autolamp system provides light sensitive automatic on/off control of the exterior lights normally controlled by the headlamp control. • T o turn autolamps on, rotate the control clockwise to . • T o turn autolamps off, rotate the control counterclockwise to . The autolamp system also keeps the lights on for a predetermined [...]

Fog lamp control W ith the ignition on, the fog lamps can be turned on when the headlamp control is pulled toward you and is in any of the following positions: • Parking lamps • Low beams • Autolamps (when active) The fog lamp indicator light will illuminate when the fog lamps have been turned on. The fog lamps will not operate when the high [...]

Scenario 2: Conditions - The automatic high beam system is set to ON in the message center . The headlamp switch is in (auto lamps). The automatic high beam system has not turned the high beams on. Operation - The high beam switch can be used to turn the high beams on. They will then remain on until the switch has been returned to the neutral posit[...]

Deactivating high beams The automatic high beams will deactivate if any of the following events occur: • An approaching vehicle’ s headlights or a preceding vehicle’ s tail lamps are detected. • The headlamp control is moved out of the autolamps position. • The vehicle speed falls below 27 mph (43 km/h). • The ambient light level is hig[...]

Note: The programming sequence will end if either of the following occur: • The vehicle speed is not zero. • The battery voltage is out of normal range. T roubleshooting If the automatic high beam camera becomes blocked, the high beams will not come on automatically . They will only activate when they are manually turned on with the multi-funct[...]

P ANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel and all applicable switches in the vehicle during headlamp and parking lamp operation. T ap the top of the switch to the first detent to brighten all interior lighted components. T ap the bottom of the switch to the first detent to dim all interior lighted components. Press [...]

3. T urn on the headlamps to illuminate the wall or screen and open the hood. T o see a clearer light pattern for adjusting, you may want to block the light from one headlamp while adjusting the other . 4. On the wall or screen you will observe a light pattern with a distinct horizontal edge towards the right. If this edge is not at the horizontal [...]

INTERIOR LAMPS Dome lamps and map lamps The map lamps are located on the overhead console. Press the lens up on either side of each map lamp to turn on the lamps. Y our vehicle has second row lamps located within the grab handles. Press the lens up to turn on the lamps. Cargo lamp The cargo lamp has a switch with three positions: on, off and center[...]

Ambient lighting Illuminates footwells and cupholders with a choice of several colors. The ambient lighting control is located on the instrument panel. T o activate, press and release this control to cycle through the color choices plus the off state. Press this control to adjust color intensity . The lights come on whenever the ignition is in eith[...]

Examples of acceptable condensation are: • Presence of thin mist (no streaks, drip marks or droplets) • Fine mist covers less than 50% of the lens Examples of unacceptable moisture (usually caused by a lamp water leak) are: • W ater puddle inside the lamp • Large water droplets, drip marks or streaks present on the interior of the lens T ak[...]

Replacing interior bulbs Check the operation of all bulbs frequently . Replacing exterior bulbs Check the operation of all bulbs frequently . Replacing HID headlamp bulbs (if equipped) The headlamps on your vehicle use a “high intensity discharge” source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter c[...]

3. Rotate the harness/bulb assembly counterclockwise, to remove from the fog lamp. 4. Carefully disconnect the bulb from the harness assembly by releasing the two snap clips. Install the new bulb in reverse order . Lights 108 2010 MKT (mkt) Owners Guide, 1st Printing USA (fus)[...]

MULTI-FUNCTION LEVER W indshield wiper: Rotate the end of the control away from you to increase the speed of the wipers; rotate towards you to decrease the speed of the wipers. Rain sensing wipers: The rain sensing wipers will automatically activate when moisture is present on the windshield and the multi-function switch is set to one of five auto/[...]

Note: Do not operate the washer when the washer reservoir is empty . This may cause the washer pump to overheat. Check the washer fluid level frequently . Do not operate the wipers when the windshield is dry . This may scratch the glass, damage the wiper blades and cause the wiper motor to burn out. Before operating the wiper on a dry windshield, a[...]

POWER TILT/TELESCOPE STEERING COLUMN The steering column can be adjusted manually by moving the four -way rocker adjustment control located below the turn signal/wiper control stalk. Hold the control to adjust. The telescope function is adjusted by moving the control toward the driver to telescope out, and toward the instrument panel to telescope i[...]

OVERHEAD CONSOLE The appearance of your vehicle’ s overhead console will vary according to your option package. Storage compartment The storage compartment may be used to store a pair of sunglasses. Press the release area on the rear edge of the bin door to open the storage compartment. The door will open to the full open position. ELECTRONIC COM[...]

Second row center console features (if equipped) The second row center console incorporates the following features: • Flip forward armrest to provide a flat load floor • Utility compartment • Cupholders • Refrigerator unit (if equipped) in the utility compartment. Refer to Console refrigerator/freezer . W ARNING: Use only soft cups in the c[...]

Refrigerator: Briefly press and hold the COOL side of the control.The indicator light on the cool side of the switch will illuminate and the indicator light on the freeze side will glow when the refrigerator is active. When in cool mode the temperature will cool to approximately 41°F (5°C). Briefly press and hold COOL again to turn off the refrig[...]

Auxiliary power points can be found in the following locations: • Near the floor in the front console bin on the passenger’ s side • In the center console utility compartment • On the rear of the center console (inside the second row center console on vehicles equipped with that feature) • In the rear cargo area on the right trim panel Do[...]

The power outlet is not designed for the following electric appliances; they may not work properly: • Cathode ray tube type televisions. • Motor loads, such as vacuum cleaners, electric saws and other electric power tools, compressor -driven refrigerators, etc. • Measuring devices, which process precise data, such as medical equipment, measur[...]

POWER WINDOWS W ARNING: Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure themselves. W ARNING: When closing the power windows, you should verify they are free of obstructions and ensure that children and/or pets are not in the proximity of the window openings. Press and p[...]

Express-up (One-touch up, all windows) Allows the windows to close fully without holding the control up. Pull the switch completely up to the second detent and release quickly . The window will close fully . Momentarily press the switch to any position to stop the window operation. Global open windows Y ou can open the vehicle’ s windows by using[...]

Window lock The window lock feature allows only the driver to operate the power windows. T o lock out all the window controls (except for the driver’ s) press the right side of the control. Press the left side to restore the window controls. Bounce-back When an obstacle has been detected in the window opening as the window is moving upward, the w[...]

Automatic dimming interior rear view mirror Y our vehicle is equipped with an interior rear view mirror which has an auto-dimming function. The electronic day/night mirror will change from the normal (high reflective) state to the non-glare (darkened) state when bright lights (glare) reach the mirror . When the mirror detects bright light from behi[...]

Heated outside mirrors Both mirrors are heated automatically to remove ice, mist and fog when the rear window defrost is activated. Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass if it is frozen in place. These actions could cause damage to the glass and mirrors. Do not clean the housing or glass of any mi[...]

W ARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. Memory feature (if equipped) The accelerator and brake pedal positions are saved when doing a memory set function and can be recalled along with the vehicle personality features when a memory position is selected through the remote entry tran[...]

5. The indicator light on the instrument cluster will turn on. Note: • V ehicle speed may vary momentarily when driving up and down a steep hill. • If the vehicle speed increases above the set speed on a downhill, you may want to apply the brakes to reduce the speed. • If the vehicle speed decreases more than 10 mph (16 km/h) below your set s[...]

ADAPTIVE CRUISE CONTROL (ACC) (IF EQUIPPED) Adaptive cruise control is much like speed control, only this system is designed to automatically adjust your speed to maintain a proper distance between you and the vehicle in front of you in the same lane. The driver can select from one of three GAP settings, the controls are located on the steering whe[...]

Setting adaptive cruise control Note: It is the drivers responsibility to stay alert, drive safely and be in control of the vehicle at all times. The controls for using your cruise control are located on the steering wheel. 1. Press and release the ON control. The message center will display CRUISE ON RADAR READY . 2. Accelerate to the desired spee[...]

The yellow ACC indicator light in the instrument cluster will be illuminated and the message center will temporarily display a preset GAP <--->. The vehicle will maintain a constant distance between the vehicle ahead until: • The vehicle in front of you accelerates to a speed above the set speed. • The vehicle in front of you moves out of[...]

Setting the gap distance The distance between your vehicle and the vehicle in front of you can be decreased or increased by pressing <---> control. GAP <---> will be displayed in the message center . Three gap distance settings are available: Message Center Display Following distance Following distance at 60 mph (96 km/h) Dynamic behavi[...]

When the driver is overriding ACC, the green cruise indicator light is illuminated, and CRUISE OVERRIDE is displayed in the message center . When the accelerator is released, the ACC function will operate again and vehicle speed will decrease to the set speed, or a lower speed if following a slower vehicle. Changing the set speed There are three wa[...]

Hilly condition usage It is recommended that the driver select a lower gear position when ACC is active in situations such as prolonged downhill driving on steep grades (i.e., driving in mountainous areas). In these situations, additional engine braking is needed to reduce the load on the vehicle’ s regular brake system to prevent them from overh[...]

• W ith vehicles that edge into your lane. These vehicles can only be detected once they have moved fully into your lane. • There may be issues with the detection of vehicles in front when driving into and coming out of a bend or curve in the road. In these cases ACC may brake late or unexpectedly . The driver should stay alert and intervene wh[...]

Blocked sensor If a message regarding a blocked sensor is displayed, the radar signals from the sensor have been obstructed. The sensor is located behind a fascia cover near the driver side of the lower grille. When the radar signals are obstructed, a vehicle ahead cannot be detected and the ACC will not function. The following table lists possible[...]

W ARNING: Do not use tires sizes other than those recommended because this can affect the normal operation of ACC. Failing to do so may result in a loss of vehicle control, which could result in serious injury . STEERING WHEEL CONTROLS Radio control features – VOL + (V olume): Press to decrease or increase the volume. (Seek): Press to select the [...]

Navigation system/SYNC 威 hands free control features (if equipped) Press control briefly until the voice icon appears on the Navigation display to use the voice command feature. Press to activate phone mode or answer a phone call. Press and hold to exit phone mode or end call. For further information on the Navigation system/SYNC 威 system, refe[...]

The panoramic Vista Roof™ and power sunshade are equipped with an automatic, one-touch, express opening feature. T o stop motion at any time during the one-touch operation, press the control a second time. T o open power sunshades and panoramic V ista Roof™: Press and release the control to open the sunshade. The front and rear sunshades open s[...]

HomeLink 威 Car2U 威 Home Automation System HomeLink 姞 Wireless Control System (if equipped) The HomeLink 威 W ireless Control System, located on the driver’ s visor , provides a convenient way to replace up to three hand-held transmitters with a single built-in device. This feature will learn the radio frequency codes of most transmitters t[...]

Retain the original transmitter for use in other vehicles as well as for future programming procedures (i.e. new HomeLink 威 equipped vehicle purchase). It is also suggested that upon the sale of the vehicle, the programmed Homelink 威 buttons be erased for security purposes, refer to Programming in this section. Programming Do not program HomeLi[...]

5. Firmly press and release the “learn” or “smart” button. (The name and color of the button may vary by manufacturer .) Note: There are 30 seconds in which to initiate Step 6. 6. Return to the vehicle and firmly press, hold for two seconds and release the programmed HomeLink 威 button. Repeat the press/hold/release sequence again and, dep[...]

Operating the HomeLink 姞 Wireless Control System T o operate, simply press and release the appropriate HomeLink 威 button. Activation will now occur for the trained product (garage door , gate operator , security system, entry door lock, or home or office lighting etc.). For convenience, the hand-held transmitter of the device may also be used a[...]

Car2U 姞 Home Automation System (if equipped) The Car2U 威 Home Automation System is a universal transmitter located in the driver’ s visor that includes two primary features – a garage door opener and a platform for remote activation of devices within the home. The Car2U 威 system’ s garage door opener function replaces the common hand-he[...]

• Fixed code garage door openers were produced prior to 1996. Fixed code uses the same coded signal every time. It is manually programmed by setting DIP switches for a unique personal code. If you do not know if your garage door opener is a rolling code or fixed code device, open your garage door opener’ s remote control battery cover . If a pa[...]

2. Go to the garage to locate the garage door opener motor and its “learn” button. Y ou may need a ladder to reach the unit and you may need to remove the unit’ s cover or light lens to locate the “learn” button. Press the “learn” button, after which you will have 10–30 seconds to return to your vehicle and complete the following st[...]

Note: The Car2U 威 system allows for three devices to be programmed. If you need to change or replace any of the three devices after it has been initially programmed, it is necessary to erase the current settings using the Erasing the Car2U 威 Home Automation System buttons procedure and then programming all of the devices being used. Fixed code [...]

3. T o input these positions into the Car2U 威 system, simultaneously press all three Car2U 威 system buttons for a few seconds and then release to put the device into programming mode. The indicator lights will blink slowly . Within 2.5 minutes enter your corresponding DIP switch settings from left to right into your Car2U 威 system by pressing[...]

T o erase programming on the Car2U 威 system (individual buttons cannot be erased), use the following procedure: 1. Firmly press the two outside Car2U 威 system buttons simultaneously for approximately 20 seconds until the indicator lights begin to blink rapidly . The indicator lights are located directly above the buttons. 2. Once the indicator [...]

W ARNING: Keep keys out of reach of children. Do not allow children to play near an open or moving power liftgate. The liftgate will only operate with the vehicle in P (Park). When the liftgate is being power closed, a chime will sound three times as the liftgate begins to power close. A single chime indicates a problem with the close request, caus[...]

T o power open or close the liftgate from the instrument panel: Press the button, located to the left of the steering column, once to power open or close the liftgate. T o power open or close the liftgate with the remote entry transmitter: Press twice within three seconds to power open or close the liftgate. Refer to Remote entry system in the Lock[...]

Note: The liftgate movement direction can be reversed with a second press of the instrument panel, or the rear cargo area control button, or a second double press of the remote entry transmitter button. T o manually operate the liftgate: 1. Disable the liftgate power function. Refer to the Message center in the Instrument Cluster chapter . 2. Open [...]

W ARNING: Make sure that the liftgate is closed to prevent exhaust fumes from being drawn into the vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate door open, keep the vehicle well ventilated so outside air comes into the vehicle. CARGO AREA FEATURES Cargo net (if equipped) The cargo pouch n[...]

T o install the shade: • Insert the ends of the cargo shade into the mounting features located behind the rear seat on the rear trim panels. T o operate the shade: 1. Grasp the rear edge of the cargo shade and pull rearward. 2. Secure both ends of the support rod into the retention slots located on the rear quarter trim panels. W ARNING: Ensure t[...]

KEYS Y our vehicle is equipped with two Intelligent Access keys which operate the power locks and the remote entry system. The IA key must be inside the vehicle in order to activate the push button start system. The IA key also contains a removable mechanical key blade that can be used to unlock the driver door . T o release the mechanical key blad[...]

POWER DOOR LOCKS • Press the control to unlock all doors. • Press the control to lock all doors. Smart unlocks The smart unlock feature is intended to prevent you from unintentionally locking your IA key inside your vehicle’ s passenger compartment. When you lock your vehicle using the driver or passenger power door lock control (with the doo[...]

Autolock feature The autolock feature will lock all the doors when: • all the doors are closed, • the ignition is on, • you shift into any gear putting the vehicle in motion, and • the vehicle attains a speed greater than 12 mph (20 km/h). The autolock feature repeats when: • any door is opened then closed while the ignition is on and the[...]

6. T o enable/disable the autolock feature, press the unlock control, then press the lock control. The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated. 7. T urn the ignition off. The horn will chirp once to confirm the procedure is complete. Keyless entry keypad autolock enable/disa[...]

Deactivating/activating autounlock feature Y our vehicle comes with the autounlock features activated; there are four methods to enable/disable this feature: • Through your authorized dealer , • by using a power door unlock/lock sequence, • using a keypad procedure, or • by using the instrument cluster message center . Refer to Message cent[...]

Keyless entry keypad autounlock enable/disable procedure 1. T urn the ignition off. 2. Close all the doors. 3. Enter factory–set 5–digit entry code. 4. Press and hold the 3 • 4. While holding the 3 • 4, press and release the 7 • 8. While still holding the 3 • 4, press and release the 7 • 8a second time. 5. Release the 3 • 4. The use[...]

REMOTE ENTRY SYSTEM The Intelligent Access keys (IA key) comply with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operat[...]

Intelligent Access W ARNING: Radio waves from the Intelligent Access system transmitters in the vehicle may affect certain implanted medical devices such as pacemakers or cardiac defibrillators. People having such implanted medical devices should ask the medical device manufacturer or their physician whether the Intelligent Access system may affect[...]

Unlocking the doors/two stage unlock 1. Press and release to unlock the driver’ s door . Note: The interior lamps and parking lamps will illuminate. 2. Press and release again within three seconds to unlock all the doors. The remote entry system activates the illuminated entry feature; this feature turns on the lamps for 25 seconds or until the i[...]

W ARNING: Make sure the liftgate is closed to prevent exhaust fumes from being drawn into the vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents open so outside air comes into the vehicle. Car finder Press twice within three seconds. The horn will chirp and the turn lamps [...]

2. Press and hold either the 1 or 2 control on the driver’ s door for five seconds. (A tone will be heard after 1 1 ⁄ 2 seconds when the memory store is done) continue to hold until a second tone is heard after five seconds. 3. W ithin three seconds press the control on the transmitter . 4. A tone will be heard when the activation is complete. [...]

2. Remove the old battery . Note: Please refer to local regulations when disposing of transmitter batteries. 3. Insert the new battery . Refer to the instructions inside the IA key for the correct orientation of the battery . Press the battery down to ensure that the battery is fully seated in the battery housing cavity . 4. Snap the battery cover [...]

The lights will not turn off if: • they have been turned on with the dimmer control, or • any door is open. Illuminated exit • When all vehicle doors are closed, the ignition is turned off , the interior dome lamps, parking lamps and puddle lamps (if equipped) will illuminate. The lights will turn off if all the doors remain closed and • 25[...]

SECURICODE™ KEYLESS ENTRY SYSTEM The keypad, located near the driver’ s window , is invisible until touched and then it lights up so you can see and touch the appropriate buttons. Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Re-enter your entry code more slowly . Y ou can use the keyless entry key[...]

Note: T ouching 5 • 6 ,7 • 8, or 9 • 0 keypad numbers as a sixth digit will not recall a driver memory setting. Note: The factory-set code cannot be associated with a memory setting. 5. The doors will lock then unlock to confirm that your personal entry code has been programmed to the module. T ips: • Do not set a code that uses five of the[...]

Note: If the Intelligent Access Key is within 3 feet (1 meter) of the driver door , your keyless entry keypad code will still function the same way , but the driver’ s door will also unlock with each keypad button press. T o lock all doors, press and hold the 7 • 8 and the 9 • 0 at the same time (with the driver’ s door closed) for two seco[...]

Automatic disarming The vehicle is disarmed immediately after the ignition is turned on. Replacement Intelligent Access Keys Note: Y our vehicle comes equipped with two Intelligent Access Keys. The Intelligent Access Key functions as both a programmed key that operates the driver door lock, activates Intelligent Access with Push Button Start system[...]

2. Press the driver or passenger power door unlock control three times. 3. Press and release the brake pedal one time. 4. Press the driver or passenger power door lock control three times. 5. Press and release the brake pedal one time. The indicator on the Start/Stop button should begin to rapidly flash, indicating that programming mode has been en[...]

• Low fuel warnings are displayed in the message center followed by a chime when the Distance to Empty value reaches 75 miles (120 km). • The Reverse sensing system, Blind Spot Information System (BLIS 威 ) with Cross T raffic Alert and Collision W arning system cannot be turned off. Optional settings – These settings can be changed • V eh[...]

Note: The MyKey™ can be cleared within the same key cycle that it was created, otherwise a standard key (Administrator key) is required to disable the MyKey™ programming. T o clear all MyKeys™ go to Step 2 in the Disable MyKey™ section. Programming MyKey™ Optional Settings W ith an Admin key in the backup slot, turn the ignition on; T o p[...]

Check MyKey™ System Status The vehicle System Check will provide the status of the following MyKey™ parameters: • MYKEY MILES — This odometer only tracks mileage when a MyKey™ is used. If mileage does not accumulate as expected, then the MyKey™ is not being used by the intended user . The only way to reset this odometer to zero is by di[...]

Intelligent Access Key (push button start) • It is not possible to program the remote start system as MyKey™ on vehicles equipped with Intelligent Access Key (push button start). Therefore, you should treat the remote start fob as you would any other admin key . When the vehicle is started using remote start, the system will stall the engine wh[...]

T roubleshooting Condition Potential Causes Can’t create a MyKey™ • Key in the backup slot is already a MyKey™. • Key in the backup slot is the last remaining Admin key (there always has to be at least one Admin key). • Intelligent Access Key (if equipped) not in the backup slot (for vehicles with push button start). • SecuriLock 威 [...]

Condition Potential Causes Lost any key • For programming spare keys, refer to the Programming spare keys section in this chapter . I accidentally programmed all keys as MyKeys™ • V ehicle has a remote start system that is recognized as an Admin key . Refer to the Using MyKey™ with Remote Start Systems section to reset all MyKeys™ as Admi[...]

Arming the system When armed, this system will respond if unauthorized entry is attempted. When unauthorized entry occurs, the system will flash the turn signal lamps and will sound the horn. The system is ready to arm whenever the ignition is off. Any of the following actions will prearm the alarm system: • Press the control on the transmitter .[...]

Disarming the system Y ou can disarm the system by any of the following actions: • Unlock the doors by using your transmitter . • Unlock the doors by using your keyless entry pad. • Unlock the driver door or all doors using the Intelligent Access. • Unlock the driver’ s door with a key . T urn the key toward the rear of the vehicle to mak[...]

SEATING W ARNING: Reclining the seatback can cause an occupant to slide under the seat’ s safety belt, resulting in severe personal injuries in the event of a collision. W ARNING: Do not pile cargo higher than the seatbacks to reduce the risk of injury in a collision or sudden stop. W ARNING: Before returning the seatback to its original position[...]

The adjustable head restraints consist of: • a trimmed energy absorbing foam and structure (1), • two steel stems (2), • a guide sleeve adjust/release button (3), • and a guide sleeve unlock/remove button (4). T o adjust the head restraint, do the following: 1. Adjust the seatback to an upright driving/riding position. Refer to Adjusting th[...]

T o remove the adjustable head restraint, do the following: 1. Pull up the head restraint until it reaches the highest adjustment position. 2. Simultaneously press and hold both the adjust/release button and the unlock/remove button, then pull up on the head restraint. T o reinstall the adjustable head restraint, do the following: 1. Insert the two[...]

Adjusting the front power seat T en-way power seats Move the front of the control up or down to tilt the seat cushion. Move the rear of the control up or down to raise or lower the seat cushion. Move the control in the directions shown to move the seat forward or backward. Press the control to recline the seatback forward or rearward. Seating and S[...]

Using the two-way power lumbar support (if equipped) The power lumbar control is located on the outboard side of the seat. Press the forward side of the control to adjust firmness. Press the rearward side of the control to adjust softness. T welve-way power seat The control is located on the outboard side of the seat cushion. Press the front portio[...]

Using the four-way power lumbar support (if equipped) The lumbar control is located on the side of the seat cushion. Press the front of the control to adjust firmness. Press the rear of the control to adjust softness. Press the top of the control to raise the height of the lumbar support. Press the bottom of the control to lower the height of the l[...]

The heated seats will turn off after 15 minutes. If the engine falls below 350 RPMs while the heated seats are on, the feature will turn itself off and will need to be reactivated. Cooled seats The cooled seats will only function when the engine is running. T o operate the cooled seats: Press once to activate the high cool setting (three indicator [...]

T o install the filter: • Position the filter in it’ s housing making sure that the far forward end is all the way up in the housing then push in on the center of the outside edge of the filter and rotate up into the housing until it clips into position. Memory seat/power mirrors/adjustable pedals (if equipped)/steering column This system allow[...]

Easy access/easy out feature This feature automatically moves the driver’ s seat rearward 2 in (5 cm) when: • the transmission is in N (Neutral) or P (Park) • the ignition is turned off The seat will move to the original position when: • the transmission is in N (Neutral) or P (Park) • the ignition is put in accessory mode The easy entry [...]

T o remove the non-adjustable head restraint, do the following: 1. Simultaneously press and hold both unlock/remove buttons, then pull up on the head restraint. T o reinstall the non-adjustable head restraint, do the following: 1. Insert the two stems into the guide sleeve collars. 2. Push the head restraint down until it locks. Seven-passenger sec[...]

T o remove the non-adjustable head restraint, do the following: 1. Press and hold the unlock/remove button, then pull up on the head restraint. T o reinstall the non-adjustable head restraint, do the following: 1. Insert the two stems into the guide sleeve collars. 2. Push the head restraint down until it locks. Adjustable second row center head re[...]

T o adjust the head restraint, do the following: 1. Raise the head restraint by pulling up on the head restraint. 2. Lower the head restraint by pressing and holding the guide sleeve adjust/release button and pushing down on the head restraint. Properly adjust the head restraint so that the top of the head restraint is even with the top of your hea[...]

T o reinstall the adjustable head restraint, do the following: 1. Insert the two stems into the guide sleeve collars. 2. Push the head restraint down until it locks. Properly adjust the head restraint so that the top of the head restraint is even with the top of your head and positioned as close as possible to the back of your head. For occupants o[...]

Using the second-row power lumbar support (six-passenger vehicles only) The power lumbar control is located on the outboard side of the seat. Press the forward side of the control to adjust firmness. Press the rearward side of the control to adjust softness. Accessing the third row seats Fold and tumble the second row seat to access the third row .[...]

The seatback will fold flat. 2. Lift the handle all the way up until the seat releases from the floor . Rotate the seat forward to allow access to the third row . 3. T o return the seatback to the floor from tumbled position, rotate the seat down until you hear it latching to the floor . Seating and Safety Restraints 190 2010 MKT (mkt) Owners Guide[...]

4. T o return the seatback to the upright position • Lift the seatback toward the rear of the vehicle, and • Rotate the seatback until you hear a click, locking it in the upright position. Note: The seatback will not raise if the rear latch hooks are not properly engaged to the floor striker . If the seatback does not raise, then repeat steps 3[...]

2. Pull on the strap located on the back of the second row seat. This will fold the seatback forward. Pull the strap a second time to tumble the seat forward, allowing easy exit from the 3rd row seat. 3. T o return the seatback to the floor from tumbled position, rotate the seat down until you hear it latching to the floor . 4. T o return the seatb[...]

Ensure that the rear latch hooks are properly engaged with the floor striker . Note : Ensure that the seat and seatback are latched securely in position. Keep floor area free of objects that would prevent proper seat engagement. W ARNING: Do not adjust or release the seat floor latch while vehicle is in motion. Do not operate the vehicle with seats[...]

The second-row heated and cooled seat controls are located on the rear of the floor console. They function the same as the front-row heated and cooled seats. For instructions on how to use refer to Front-row heated and cooled seats earlier in this chapter . Second-row climate controlled seats air filter replacement The climate controlled seat syste[...]

Note: Do not use the third row seatback as a load floor when the seatback is folded. Note: In order to allow the seat to latch in the stowed position, do not stow objects under the seat before stowing. Unstowing the third row seat Note: Ensure that there are no objects such as books, purses or brief cases on the load floor before unstowing the seat[...]

W ARNING: Ensure the seat is latched to vehicle floor by pushing/pulling on seat. If not latched, the seat may cause injury during a sudden stop. Third row power seats (if equipped) The third row power seat buttons are located behind the third row seats on the left-hand quarter trim panel. Note: In order to allow the seat to latch in the stowed pos[...]

W ARNING: Do not drive the vehicle when the third row seat is rotated backwards. During a sudden stop, the safety belts are not functional in this position, and during a sudden stop, the third row seat can rapidly tip back to the forward position, all of which may result in serious injury . Closing the liftgate W ARNING: T o avoid injury to third r[...]

• The electrical wiring for the airbags, crash sensor(s), safety belt pretensioners, front safety belt usage sensors, driver seat position sensor , front passenger sensing system, and indicator lights. How does the Personal Safety System™ work? The Personal Safety System™ can adapt the deployment strategy of your vehicle’ s safety devices a[...]

Front passenger sensing system For airbags to do their job they must inflate with great force, and this force can pose a potentially deadly risk to occupants that are very close to the airbag when it begins to inflate. For some occupants, this occurs because they are initially sitting very close to the airbag. For other occupants, this occurs when [...]

Front safety belt energy management retractors The front outboard safety belt energy management retractors allow webbing to be pulled out of the retractor in a gradual and controlled manner in response to the occupant’ s forward momentum. This helps reduce the risk of force-related injuries to the occupant’ s chest by limiting the load on the o[...]

W ARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision. W ARNING: All occupants of the vehicle, including the driver , should always properly wear their safety belts, even when an air bag supplemental restraint system (SRS) is provided. W ARNING: [...]

Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. 2. T o unfasten, press the release button and remove the tongue from the buckle. All restraints in the v[...]

Both the outer and inner shoulder belts must be kept in the stowage clip together to prevent the potential of wrinkling the cargo shade. W ARNING: Do not stow only one portion of the shoulder belt in the stowage clip. W earing the shoulder belt in this condition increases the amount of belt slack and may reduce the effectiveness of the safety belt [...]

Webbing extraction sensitive mode The webbing sensitive locking mode locks the webbing and prevents more belt from being pulled out if the belt is pulled out too quickly . The belt will unlock when you stop pulling on it. Automatic locking mode When to use the automatic locking mode In this mode, the shoulder belt is automatically pre-locked. The b[...]

How to disengage the automatic locking mode W ARNING: Ford Motor Company recommends that all passenger safety belt assemblies and attaching hardware should be inspected by an authorized dealer after any collision to verify that the ⬙ automatic locking retractor ⬙ feature for child seats is still working properly . Safety belt assemblies should [...]

W ARNING: The driver and front passenger safety belt system (including retractors, buckles and height adjusters) must be replaced if the vehicle is involved in a collision that results in deployment of front airbags, seat-mounted side airbags and Safety Canopy 威 , and safety belt pretensioners. Safety belt extension assembly If the safety belt is[...]

Belt-Minder 姞 The Belt-Minder 威 feature is a supplemental warning to the safety belt warning function. This feature provides additional reminders by intermittently sounding a chime and illuminating the safety belt warning light in the instrument cluster when the driver’ s and front passenger’ s safety belt is unbuckled. The Belt-Minder 威 [...]

The following are reasons most often given for not wearing safety belts (All statistics based on U.S. data): Reasons given... Consider ... “Crashes are rare events” 36700 crashes occur every day . The more we drive, the more we are exposed to “rare” events, even for good drivers. 1i n4o fu sw i l lb e seriously injured in a crash during our[...]

Reasons given... Consider ... “I have an airbag” Airbags offer greater protection when used with safety belts. Frontal airbags are not designed to inflate in rear and side crashes or rollovers. “I’d rather be thrown clear” Not a good idea. People who are ejected are 40 times more likely to DIE. Safety belts help prevent ejection, WE CAN?[...]

W ARNING: While the design allows you to deactivate your Belt-Minder 威 , this system is designed to improve your chances of being safely belted and surviving an accident. W e recommend you leave the Belt-Minder 威 system activated for yourself and others who may use the vehicle. T o reduce the risk of injury , do not deactivate/activate the Belt[...]

AIRBAG SUPPLEMENT AL RESTRAINT SYSTEM (SRS) The airbag supplemental restraint system (SRS) is designed to work in conjunction with the safety belts to help protect the driver and front outboard passenger from certain upper body injuries. The term “supplemental restraint” means the airbags are intended as a supplement to the safety belts. Airbag[...]

W ARNING: Do not place any object between an occupant and an airbag or near any other airbag covering. The airbag may not inflate properly and might force an object into that person causing severe injury or death. The instrument panel grab handle should never be used for storage. The path of an inflating airbag must be kept clear at all times. W AR[...]

W ARNING: Modifying or adding equipment to the front end of the vehicle (including frame, bumper , front end body structure and tow hooks) may affect the performance of the airbag system, increasing the risk of injury . Do not modify the front end of the vehicle. Children and airbags Children must always be properly restrained. Accident statistics [...]

The airbags inflate and deflate rapidly upon activation. After airbag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (e.g., baking soda) that result from the combustion process that inflates the airbag. Small amo[...]

• diagnostic module. • the electrical wiring which connects the components. • Front passenger sensing system. Refer to Front passenger sensing system later in this chapter . • “Passenger airbag off” or “pass airbag off” indicator lamp. Refer to Front passenger sensing system later in this chapter . The diagnostic module monitors its[...]

The front passenger sensing system uses a ⬙ passenger airbag off ⬙ or ⬙ pass airbag off ⬙ indicator which will illuminate and stay lit to remind you that the front passenger frontal airbag is disabled. The indicator lamp is located in the center of the instrument panel above the radio. Note: The indicator lamp will illuminate for a short pe[...]

Occupant Pass Airbag Off Indicator Light Passenger Airbag Empty seat Unlit Disabled Small child in child safety seat or booster Lit Disabled Small child with safety belt buckled or unbuckled Lit Disabled Adult Unlit Enabled W ARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating positio[...]

Objects Pass Airbag Off Indicator Light Passenger Airbag Small (i.e. three-ring binder , small purse, bottled water) Unlit Disabled Medium (i.e. heavy briefcase, fully packed luggage) Lit Disabled Empty seat, or small to medium object with safety belt buckled Lit Disabled If you think that the status of the passenger airbag off indicator lamp is in[...]

In case there is a problem with the front passenger sensing system, the airbag readiness lamp in the instrument cluster will stay lit. If the airbag readiness lamp is lit, do the following: The driver and/or adult passengers should check for any objects that may be lodged underneath the front passenger seat or cargo interfering with the seat. If ob[...]

A difficulty with the system is indicated by one or more of the following: • The readiness light (same light for front and side airbag system) will either flash or stay lit. • The readiness light will not illuminate immediately after ignition is turned on. • A series of five beeps will be heard. The tone pattern will repeat periodically until[...]

automotive safety experts known as the Side Airbag T echnical W orking Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags. The side airbag system consists of the following: • An inflatable nylon bag (airbag) with a gas generator concealed behind the outboard bolster of the driver[...]

W ARNING: If the side airbag has deployed, the airbag will not function again. The side airbag system (including the seat) must be inspected and serviced by an authorized dealer . If the airbag is not replaced, the unrepaired area will increase the risk of injury in a collision. Safety Canopy 姞 System W ARNING: Do not place objects or mount equip[...]

W ARNING: All occupants of the vehicle including the driver should always wear their safety belts even when an airbag SRS and Safety Canopy 威 system is provided. W ARNING: T o reduce risk of injury , do not obstruct or place objects in the deployment path of the inflatable Safety Canopy 威 . How does the Safety Canopy 姞 system work? The design[...]

The Safety Canopy 威 system, in combination with safety belts, can help reduce the risk of severe injuries in the event of a significant side impact collision or rollover event. Children 12 years old and under should always be properly restrained in the second or third row seats. The Safety Canopy 威 will not interfere with children restrained us[...]

Determining if the system is operational The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system. Refer to the Airbag readiness section in the Instrument Cluster chapter . Routine maintenance of the airbag is not required. Any difficulty with the system is indicated by one or more of the following:[...]

SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safety restraints for children. Also see Airbag supplemental restraint system (SRS) in this chapter for special instructions about using airbags. Important child restraint precautions W ARNING: Always make sure your child is secured properly in a device [...]

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommended restraint type Infants or toddlers Children weighing 40 lb (18 kg) or less (generally age four or younger) Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat). Small children Children who have outgrown or no[...]

Recommendations for attaching child safety restraints for children Restraint T ype Child W eight Use any attachment method as indicated below by “X” LA TCH (lower anchors and top tether anchor) LA TCH (lower anchors only) Safety belt and top tether anchor Safety belt and LA TCH (lower anchors and top tether anchor) Safety belt only Rear facing [...]

W ARNING: Always carefully follow the instructions and warnings provided by the manufacturer of any child restraint to determine if the restraint device is appropriate for your child’ s size, height, weight, or age. Follow the child restraint manufacturer’ s instructions and warnings provided for installation and use in conjunction with the ins[...]

training to ensure that all children ages 0 to 16 are properly restrained in the correct restraint system. Ford recommends checking with a NHTSA Certified Child Passenger Safety T echnician (CPST) and your pediatrician to make sure your seat is appropriate for your child and properly installed in the vehicle. T o locate a child seat fitting station[...]

Airbags can kill or injure a child in a child seat. NEVER place a rear -facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat all the way back. Children 12 and under should be properly restrained in a rear seating position whenever possible. If all children cannot be sea[...]

1. Position the child safety seat in a seat with a combination lap and shoulder belt. 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together . 3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer’ s instructions. Be sure th[...]

4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it. 5. T o put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull[...]

9. Attach the tether strap (if the child seat is equipped). Refer to Attaching child safety seats with tether straps later in this chapter . 10. Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. T o check this, grab the seat at the belt path and attempt to move it side to [...]

Y our vehicle has LA TCH lower anchors for child seat installation at the seating positions marked with the child seat symbol. The LA TCH anchors are located at the rear section of the rear seat between the cushion and seat back, below the locator symbols on the seatback. Follow the child seat manufacturer’ s instructions to properly install a ch[...]

W ARNING: Depending on where you secure a child restraint, and depending on the child restraint design, you may block access to certain safety belt buckle assemblies and/or LA TCH lower anchors, rendering those features potentially unusable. T o avoid risk of injury , occupants should only use seating positions where they are able to be properly re[...]

Attach the tether strap afterward, if included with the child seat. Refer to Recommendations for attaching child safety restraints for children in this chapter . Attaching child safety seats with tether straps Many forward-facing child safety seats include a tether strap which extends from the back of the child safety seat and hooks to an anchoring[...]

Perform the following steps to attach a child safety seat to the tether anchor: 1. Route the tether strap under the head restraint and between the head restraint posts. For vehicles with adjustable head restraints, route the tether strap under the head restraint and between the head restraint posts, otherwise route the tether strap over the top of [...]

3. Clip the tether strap to the anchor as shown. If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a collision. 4. T ighten the child safety seat tether strap according to the manufacturer’ s instructions. If the safety seat is not anchored properly , the risk of a child being injured [...]

Booster seats position a child so that vehicle lap/shoulder safety belts fit better . They lift the child up so that the lap belt rests low across the hips and the knees bend comfortably at the edge of the cushion, while minimizing slouching. Booster seats may also make the shoulder belt fit better and more comfortably . T ry to keep the belt near [...]

T ypes of booster seats There are generally two types of belt-positioning booster seats: backless and high back. Always use booster seats in conjunction with the vehicle lap/shoulder belt. • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head [...]

Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder . The drawings below compare the ideal fit (center) to a shoulder belt uncomfortably close to [...]

Follow all instructions provided by the manufacturer of the booster seat. W ARNING: Never place, or allow a child to place, the shoulder belt under a child’ s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a collision. Child restraint and safety belt maintena[...]

NOTICE TO CROSSOVER VEHICLE OWNERS Crossover vehicles handle differently than passenger cars in the various driving conditions that are encountered on streets, highways and off-road. Crossover vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under [...]

driving surfaces are relatively level, obstruction-free and otherwise similar to normal on-road driving conditions. Operating your vehicle under other than those conditions could subject the vehicle to excessive stress which might result in damage which is not covered under your warranty . For A WD vehicles, a spare tire of a different size other t[...]

INFORMA TION ABOUT UNIFORM TIRE QUALITY GRADING T ire Quality Grades apply to new pneumatic passenger car tires. The Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: • T readwear 200 T raction AA T emperature A These T ire Quality Grades are determined by standards th[...]

W ARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. T emperature A B C The temperature grades are A (the highest), B and C, representing the tire’ s resistance to the generation of heat and its ability to [...]

Increasing the inflation pressure beyond this pressure will not increase the tire’ s load carrying capability . • kPa: Kilopascal, a metric unit of air pressure. • PSI: Pounds per square inch, a standard unit of air pressure. • Cold inflation pressure: The tire pressure when the vehicle has been stationary and out of direct sunlight for an [...]

W ARNING: Under -inflation is the most common cause of tire failures and may result in severe tire cracking, tread separation or ⬙ blowout ⬙ , with unexpected loss of vehicle control and increased risk of injury . Under -inflation increases sidewall flexing and rolling resistance, resulting in heat buildup and internal damage to the tire. It al[...]

Note: If you have to drive a distance to get air for your tire(s), check and record the tire pressure first and add the appropriate air pressure when you get to the pump. It is normal for tires to heat up and the air pressure inside to go up as you drive. 2. Remove the cap from the valve on one tire, then firmly press the tire gauge onto the valve [...]

Improper or inadequate vehicle maintenance can cause tires to wear abnormally . Inspect all your tires, including the spare, frequently , and replace them if one or more of the following conditions exist: Tire wear When the tread is worn down to 1/16th of an inch (2 mm), tires must be replaced to help prevent your vehicle from skidding and hydropla[...]

U.S. DOT Tire Identification Number (TIN) Both U.S. and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT T ire Identification Number for safety standard certification[...]

W ARNING: When mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below . If the beads do not seat at the maximum pressure indicated, re-lubricate and try again. When inflating the tire for mounting pressures up to 20 psi (1.3[...]

• Do not run over curbs or hit the tire against a curb when parking W ARNING: If your vehicle is stuck in snow , mud, sand, etc., do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. W ARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires[...]

• Front Wheel Drive (FWD) vehicles (front tires at top of diagram) • Rear Wheel Drive (RWD) vehicles/Four Wheel Drive (4WD)/All Wheel Drive (A WD) vehicles (front tires at top of diagram) Sometimes irregular tire wear can be corrected by rotating the tires. Note: If your tires show uneven wear ask an authorized dealer to check for and correct a[...]

Information on “P” type tires P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below . (Note that the tire size, load index and speed rating for your vehicle may be different from this example.) 1. P: Indicates a tire, designated by the T ire and Rim Association (T&RA), that[...]

Note: Y ou may not find this information on all tires because it is not required by federal law . Letter rating Speed rating - mph (km/h) M 81 mph (130 km/h) N 87 mph (140 km/h) Q 99 mph (159 km/h) R 106 mph (171 km/h) S 112 mph (180 km/h) T 118 mph (190 km/h) U 124 mph (200 km/h) H 130 mph (210 km/h) V 149 mph (240 km/h) W 168 mph (270 km/h) Y 186[...]

12. T readwear , T raction and T emperature Grades • T readwear: The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1 ⁄ 2 ) times as well on the government course as a tire grad[...]

Additional information contained on the tire sidewall for “L T” type tires “L T” type tires have some additional information beyond those of “P” type tires; these differences are described below . Note: T ire Quality Grades do not apply to this type of tire. 1. LT: Indicates a tire, designated by the T ire and Rim Association (T&RA)[...]

Information on “T” type tires “T” type tires have some additional information beyond those of “P” type tires; these differences are described below: T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example. T ire Quality Grades do not apply to this type of tire. 1. T: Ind[...]

TIRE PRESSURE MONITORING SYSTEM (TPMS) Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard[...]

The T ire Pressure Monitoring System complies with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. W ARNING: The[...]

Understanding your Tire Pressure Monitoring System (TPMS) The T ire Pressure Monitoring System measures pressure in your four road tires and sends the tire pressure readings to your vehicle. The Low T ire Pressure W arning Lamp will turn ON if the tire pressure is significantly low . Once the light is illuminated, your tires are under inflated and [...]

When you believe your system is not operating properly The main function of the T ire Pressure Monitoring System is to warn you when your tires need air . It can also warn you in the event the system is no longer capable of functioning as intended. Please refer to the following chart for information concerning your T ire Pressure Monitoring System:[...]

Low T ire Pressure W arning Light Possible cause Customer Action Required Flashing W arning Light Spare tire in use Y our temporary spare tire is in use. Repair the damaged road wheel and re-mount it on the vehicle to restore system functionality . For a description of how the system functions under these conditions, refer to When your temporary sp[...]

SNOW TIRES AND CABLES/CHAINS W ARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover , personal injury and dea[...]

V EHICLE LOADING – WITH AND WITHOUT A TRAILER This section will guide you in the proper loading of your vehicle and/or trailer , to keep your loaded vehicle weight within its design rating capability , with or without a trailer . Properly loading your vehicle will provide maximum return of vehicle design performance. Before loading your vehicle, [...]

W ARNING: The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available. Overloading or improperly loading you[...]

Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GA W (Gross Axle W eight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. GA WR (Gross Axle W eight Rating[...]

• Example only: W ARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury . Tires, Wheels and Loading 270 2010 MKT (mkt) Owners Guide, 1st P[...]

GCW (Gross Combined W eight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer . GCWR (Gross Combined W eight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo and passengers – that the vehicle can handle without risking damage. (Important: The towing [...]

Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’ s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers fr[...]

calculation would be: 635 kg - (2 x 99 kg) - (12 x 45 kg) = 635 - 198 - 540 = -103 kg. Y ou will need to reduce the load weight by at least 240 lb. (104 kg). If you remove 3-100 lb. (45 kg) cement bags, then the load calculation would be: 1,400 - (2 x 220) - (9 x 100) = 1,400 - 440 - 900 = 60 lb. Now you have the load capacity to transport the ceme[...]

FWD GCWR (Gross Combined W eight Rating)/T railer W eight Class Maximum GCWR T railer weight T ongue load Class I towing (standard) 6900 lb (3131 kg) 2000 lb (907 kg) * 200 lb (91 kg) Class III towing (optional) 9450 lb (4288 kg) 4500 lb (2042 kg) * 450 lb (204 kg) * For towing trailers up to 3500 lb (1588 kg), use a weight carrying hitch and ball [...]

EcoBoost A WD GCWR (Gross Combined W eight Rating)/T railer W eight Class Maximum GCWR T railer weight range T ongue load Class I towing (standard) 7200 lb (3267 kg) 2000 lb (907 kg) * 200 lb (91 kg) Class III towing (optional) 9750 lb (4424 kg) 4500 lb (2042 kg) * 450 lb (204 kg) * For towing trailers up to 4500 lb (2042 kg), use a weight carrying[...]

3. Attach the trailer to the vehicle and adjust the hitch equalizers so that the front bumper height is within 1 ⁄ 2 ” (13 mm) of the reference point. After proper adjustment, the rear bumper should be no higher than in Step 2. W ARNING: Do not adjust a weight distributing hitch to any position where the rear bumper of the vehicle is higher tha[...]

Driving while you tow When towing a trailer: • T urn off the speed control. The speed control may shut off automatically when you are towing on long, steep grades. • Consult your local motor vehicle speed regulations for towing a trailer . • It is recommended to select the L (Low) gear position when additional engine braking is needed. In sit[...]

RECREATIONAL T OWING Follow these guidelines for your specific powertrain combination to tow your vehicle for personal travel (such as behind a motor home or a truck). Note: Put your climate control system in recirculated air mode to prevent exhaust fumes from entering the vehicle. Refer to the Climate Controls chapter for more information. In case[...]

STARTING Ignition modes 1. Off — This position shuts the engine and all electrical accessories off. Press and release the ST ART/STOP button without applying the brake pedal when your vehicle is in accessory or on modes or when the engine is running. Note: When the vehicle is in motion, a single press and release of the ST ART/STOP button will no[...]

W ARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover . The emission system heats up the engine compartment and exhaust system, which can start a fire. W ARNING: Do not start your vehicle in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the en[...]

• Make sure the gearshift lever is in P (Park). Push button start system Y our vehicle is equipped with the push button start system, you can start your vehicle by pressing the start button in combination with the brake pedal. The start button is located on the instrument panel to right of the steering wheel. Note: T o start your vehicle, your In[...]

There may be areas inside your vehicle where the IA key is not detected. If the message NO KEY DETECTED appears on your message center when you press the ST ART/STOP button, it may be necessary to move your IA key to another area within the vehicle. The IA key may not be detected near the roof (between the driver or passenger sunvisor and the roof,[...]

Switching the V ehicle Off when not in Park: It is recommended that you shift into the Park position before switching your vehicle off. If you switch your vehicle off with the shifter in any position other than Park, the message SHIFT TO P ARK will be displayed in the message center . If the vehicle is left in this state, your key in ignition chime[...]

ENGINE BLOCK HEATER (IF EQUIPPED) An engine block heater warms the engine coolant which aids in starting and allows the heater/defroster system to respond quickly . If your vehicle is equipped with this system, your equipment includes a heater element which is installed in your engine block and a wire harness which allows the user to connect the sy[...]

• Be sure that areas where the vehicle is parked are clean and clear of all combustibles such as petroleum products, dust, rags, paper and similar items. • Be sure that the engine block heater , heater cord and extension cord are solidly connected. A poor connection can cause the cord to become very hot and may result in an electrical shock or [...]

Four-wheel anti-lock brake system (ABS) Y our vehicle is equipped with an anti-lock braking system (ABS). This system helps you maintain steering control during emergency stops by keeping the brakes from locking. Noise from the ABS pump motor and brake pedal pulsation may be observed during ABS braking and the brake pedal may suddenly travel a litt[...]

The BRAKE warning lamp in the instrument cluster illuminates and remains illuminated (when the ignition is turned on) until the parking brake is released. W ARNING: Always set the parking brake fully and make sure that the gearshift is securely latched in P (Park). The parking brake is not recommended to stop a moving vehicle. However , if the norm[...]

W ARNING: Remember that even advanced technology cannot defy the laws of physics. It’ s always possible to lose control of a vehicle due to inappropriate driver input for the conditions. Aggressive driving on any road condition can cause you to lose control of your vehicle increasing the risk of personal injury or property damage. Activation of t[...]

and the “sliding car off” icon in the instrument cluster will illuminate temporarily during start-up as part of a normal system self-check. The “sliding car” icon may illuminate (flash) during certain driving situation which cause the AdvanceT rac 威 with RSC 威 system to operate. If the “sliding car” icon illuminates steadily , have [...]

If the T raction Control system is activated excessively in a short period of time, the braking portion of the system may become temporarily disabled to allow the brakes to cool down. In this situation, T raction Control will use only engine power reduction or transfer to help control the wheels from over -spinning. When the brakes have cooled down[...]

Certain adverse driving maneuvers may activate the Roll Stability Control system, which include: • Emergency lane-change • T aking a turn too fast • Quick maneuvering to avoid an accident, pedestrian or obstacle Switching off T raction Control If the vehicle is stuck in snow , mud or sand, and seems to lose engine power , switching off the T [...]

AdvanceT rac 威 Features Control switch functions Mode “Sliding car off” icon Message Center Dis- play ESC/ RSC T rac- tion Con- trol Default at start-up System Initialization T urns on during bulb check Nothing Displayed Enabled Enabled Control switch pressed once momentarily T raction Control OFF On TRACTION CONTROL OFF Enabled Dis- abled Co[...]

Disabling trailer sway control T railer sway control can be disabled during any key cycle. T o disable trailer sway control, refer to the Message center in the Instrument Cluster chapter . Note that regardless of chosen enable state, trailer sway control will be re-enabled each new key cycle. W ARNING: T urning off trailer sway control increases th[...]

W ARNING: If the message SERVICE POWER STEERING is displayed in the message center , the EPS system has detected a problem with the system function. On the next key cycle the message SERVICE POWER STEERING NOW will be displayed and steering assist will be removed until the steering system is serviced. Have your vehicle taken to the nearest dealer a[...]

BRAKE-SHIFT INTERLOCK This vehicle is equipped with a brake-shift interlock feature that prevents the gearshift lever from being moved from P (Park) when the ignition is in the on position unless the brake pedal is applied. If you cannot move the gearshift lever out of P (Park) when the ignition is on and the brake pedal applied, it is possible tha[...]

Understanding the gearshift positions of the 6–speed automatic transmission Y our vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating. When you take your foot off the accelerator pedal and the vehicle begins to slow down the torque converter clutch locks up and aggressively shuts off fuel flow t[...]

M (Manual) with Grade Assist Initially , moving the lever to M (Manual) activates grade assist and cancels overdrive. Grade Assist: • Provides additional grade (engine) braking and extends lower gear operation on uphill climbs for hilly terrain or mountainous areas. • Provides additional engine braking through the automatic transmission shift s[...]

Understanding your SelectShift Automatic™ T ransmission (SST) This vehicle is equipped with a SelectShift Automatic™ transmission (SST) gearshift lever . SST is an automatic transmission with the ability for the driver to change gears up or down (without a clutch) as desired. By moving the gearshift lever from drive position D (Drive) to M (Man[...]

The instrument cluster will show the current selected gear you are in. In order to prevent the engine from running at too low an RPM, which may cause it to stall, the SST will automatically make some downshifts even if it has determined that you have not downshifted in time. Although the SST will make some downshifts for you, it will still allow yo[...]

W ARNING: Certain add-on devices such as large trailer hitches, bike or surfboard racks and any device that may block the normal detection zone of the RSS system may create false beeps. The RSS detects obstacles up to six feet (two meters) from the rear bumper with a decreased coverage area at the outer corners of the bumper , (refer to the figures[...]

REARVIEW CAMERA SYSTEM The rearview camera system, located on the liftgate, provides a video image, which appears on the navigation system screen, of the area behind the vehicle. It adds assistance to the driver while reversing or reverse parking the vehicle. T o use the camera system, place the transmission in R (Reverse); an image will display on[...]

When towing, the camera system will only see what is being towed behind the vehicle; this might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen. The camera lens for the camera is located on the liftgate. Keep the lens clean so the video image remains clear and undistorted. Clean the lens w[...]

COLLISION W ARNING SYSTEM (IF EQUIPPED) The collision warning with brake support, is designed to alert the driver of certain collision risks with a red warning light located above the dashboard and an audible warning chime. The brake support assists the driver in reducing the collision speed, by pre-charging the brakes. W ARNING: This system is des[...]

Collision W arning System Limitations Due to the nature of radar technology , there may be certain instances where vehicles will not provide a collision warning. These include: • Stationary or slow moving vehicles below 6 mph (10 km/h). • Pedestrians or objects in the roadway . • Oncoming vehicles in the same lane. • Severe weather conditio[...]

Cause Action The surface of the radar in the grille is dirty or obstructed in some way Clean the grille surface in front of the radar or remove the object causing the obstruction The surface of the radar in the grille is clean but the message remains in the display W ait a short time. It may take several minutes for the radar to detect that it is n[...]

W ARNING: This system is designed to be a supplementary park aid. It may not work in all conditions and is not intended to replace the driver’ s attention and judgment. The driver is responsible for avoiding hazards and maintaining a safe distance and speed, even when the AP A is in use. Conditions in which the system may not work: • Something [...]

When the system has found a space, the message center will display SP ACE FOUND PULL FORW ARD followed by a chime. Drive forward until the message center displays SP ACE FOUND STOP followed by a chime. When you stop the vehicle in position to begin parking, the message center displays REMOVE HANDS PUT IN REVERSE. The driver should always come to a [...]

When you determine the vehicle is far enough forward or a solid tone from the Forward Sensing System (if equipped) is heard, bring the vehicle to a complete stop and move the gearshift to R (Reverse). The message center may display BACK UP SLOWL Y USE CAUTION followed by a chime. The system may offer subsequent backward and forward maneuvers before[...]

The system should not be used if: • A foreign object (i.e. bike rack, trailer , etc.) is attached to the front or rear of the vehicle or at another location close to the sensors. • The front bumper or side sensors are damaged (i.e. in a collision) or obstructed by a foreign object (i.e. front bumper cover). • A mini-spare tire is used T roubl[...]

• The tires may not be installed and maintained correctly . For example, one or more tires may not be inflated correctly , may not be of the same size, or may not be authorized for use on this vehicle. • The vehicle had a repair or alteration that is not authorized by the manufacturer . • One of the parked vehicles has a high altitude attachm[...]

Driving with blind spot mirrors Before a lane change, check the main mirror first, then check the blind spot mirror . If no vehicles are present in the blind spot mirror and the traffic in the adjacent lane is at a safe distance, signal that you are going to change lanes. Glance over your shoulder to verify traffic is clear , and carefully change l[...]

BLIND SPOT INFORMATION SYSTEM (BLIS 姞 ) WITH CROSS T RAFFIC ALERT (CT A) (IF EQUIPPED) The BLIS 威 is a convenience feature that aids the driver in assessing whether a vehicle is within an area on either side of the vehicle extending rearward from the outside mirrors to approximately 10 feet (three meters) beyond the bumper . This area is referr[...]

The BLIS 威 will trigger the alert for vehicles that enter your blind zone from the rear or merge in to the blind zone from the side. V ehicles that you pass, or a vehicle that enters the blind zone from the front, will trigger the alert only after the vehicle is present in the blind zone for three seconds. Note: For vehicles that pass through the[...]

Cross traffic alert (CT A) system operation The CT A system warns the driver of approaching vehicles when R (Reverse) is selected and the vehicle is backing out of a front-in parking spot. It sounds a series of tones and flashes the BLIS 威 indicator found on the exterior mirror on the side of the approaching vehicle. Additionally , the message ce[...]

CT A coverage also decreases when parking at shallow angles (refer to figure for approximate zone coverage areas [sensor obstructed for vehicle on left] ). CT A detection limitations: Due to the nature of radar technology , there may be certain instances where vehicles entering and exiting the blind spot zones may not be detected. Below is a list o[...]

CT A and Reverse Sensing System (RSS) interaction CT A works along with the Reverse Sensing System (RSS) (if equipped). Become familiar with the warning tones of both systems. BLIS 威 and/or CT A on/off and disable operation The BLIS 威 and/or the CT A can be turned off via the message center . If either the BLIS 威 and/or the CT A is turned off[...]

W ARNING: Just prior to the system recognizing a blocked condition and alerting the driver , the number of missed objects will increase. T o help avoid injuries, NEVER use the BLIS 威 as a replacement for using the side and rear view mirrors and looking over your shoulder before changing lanes. BLIS 威 is not a replacement for careful driving and[...]

T railer tow false alerts When towing a trailer , the sensors may detect the trailer thus causing a false alert. It may be desirable to turn the BLIS 威 off if the false alerts become annoying. Day and night brightness The BLIS 威 and/or CT A alert will automatically dim when the headlamp switch is in P ARK, ON, or AUTO ON and night time darkness[...]

location and allow it to idle. The A WD OFF message will turn off when the system cools and normal A WD function returns. Note: Y our A WD vehicle is not intended for off-road use. The A WD feature gives your vehicle some limited off-road capabilities in which driving surfaces are relatively level, obstruction-free and otherwise similar to normal o[...]

If your vehicle gets stuck If your vehicle gets stuck in mud or snow it may be rocked out by shifting between forward and reverse gears, stopping between shifts, in a steady pattern. Press lightly on the accelerator in each gear . If your vehicle is equipped with T raction Control™, it may be beneficial to disengage the T raction Control™ syste[...]

• If the vehicle goes from one type of surface to another (i.e., from concrete to gravel) there will be a change in the way the vehicle responds to a maneuver (steering, acceleration or braking). Again, avoid these abrupt inputs. A WD Systems (if equipped) A WD uses all four wheels to power the vehicle. This increases traction, enabling you to dr[...]

Driving through deep water may damage the engine or transmission. If the front or rear axle is submerged in water , the axle lubricant and PTU (Power T ransfer Unit) lubricant should be checked and changed if necessary . After driving through mud, clean off residue stuck to rotating driveshafts and tires. Excess mud stuck on tires and rotating driv[...]

Descend a hill in the same gear you would use to climb up the hill to avoid excessive brake application and brake overheating. Do not descend in neutral; instead, disengage overdrive or manually shift to a lower gear . When descending a steep hill, avoid sudden hard braking as you could lose control. The front wheels have to be turning in order to [...]

Maintenance and Modifications The suspension and steering systems on your vehicle have been designed and tested to provide predictable performance whether loaded or empty and durable load carrying capability . For this reason, Ford Motor Company strongly recommends that you do not make modifications such as adding or removing parts (such as lift ki[...]

ROADSIDE ASSISTANCE Getting roadside assistance T o fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New V ehicle Limited W arranty . The service is available: • 24–hours, seven days a week • for the coverage period listed on the Roadsi[...]

• towing of your disabled vehicle • emergency travel expense reimbursement • travel planning benefits In Canada, for uninterrupted Roadside Assistance coverage, you may purchase extended coverage prior to your Basic W arranty’ s Roadside Assistance expiring. For more information and enrollment, contact 1–877–294–2582 or visit our webs[...]

FUEL PUMP SHUT-OFF In the event of a moderate to severe collision, this vehicle is equipped with a fuel pump shut-off feature that stops the flow of fuel to the engine. Not every impact will cause a shut-off. Should your vehicle shut off after a collision due to this feature, you may restart your vehicle by doing the following: 1. T urn the ignitio[...]

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A T an T an — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Y ellow Y ellow Y ellow Blu[...]

Passenger compartment fuse panel The fuse panel is located under the instrument panel to the left of the steering wheel. The fuses are coded as follows. Fuse/Relay Location Fuse Amp Rating Protected Circuits 1 30A Right rear smart window 2 15A Refrigerator 3 15A Driver seat switch, 2nd row lumbar switches 4 30A Right front smart window 5 10A Brake [...]

Fuse/Relay Location Fuse Amp Rating Protected Circuits 8 10A Low beam headlamps (right) 9 15A Interior lights, Cargo lamps 10 15A Backlighting, Puddle lamps 11 10A All wheel drive (A WD) 12 7.5A Intelligent access (IA) 13 5A Memory switches, IA receiver , Exterior mirror switch, Steering column position switch, Driver seat module, Driver door modul[...]

Fuse/Relay Location Fuse Amp Rating Protected Circuits 25 10A Demand lamps/Interior lamps, 2nd row power fold seats, Powertrain control module (GTDI) wake-up, 3rd row seat relay 26 10A Instrument panel cluster , Heads up display 27 20A Ignition Switch, IA 28 5A Radio mute 29 5A Instrument panel cluster 30 5A T ransmission shifter 31 10A Steering an[...]

Fuse/Relay Location Fuse Amp Rating Protected Circuits 46 7.5A Occupant classification sensor (OCS), Passenger airbag deactivation indicator (P ADI), Front control interface module 47 30A Circuit Breaker Not used 48 Full ISO relay Delayed accessory relay Power distribution box The power distribution box is located in the engine compartment. The pow[...]

The high-current fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Protected Circuits 1 — Not used 2 — Not used 3 30A* T railer tow brake controller 4 40A* Wiper relay (front and rear) 5 30A* Passenger power seat 6 30A* 110V AC inverter 7 30A* Rear climate control seat module 8 30A* Front climate control seat module 9 40A* Anti-lo[...]

Fuse/Relay Location Fuse Amp Rating Protected Circuits 14 10A** Brake on/off (BOO) switch, Adaptive cruise relay 15 15A** Automatic high beams, Adaptive cruise control 16 20A** Left HID headlamp 17 10A** Alternator sensor 18 30A* 3rd row power seats 19 20A* Front console power point 20 40A* Rear defroster , Heated mirrors 21 20A* Rear console power[...]

Fuse/Relay Location Fuse Amp Rating Protected Circuits 39 Diode Fuel diode 40 Diode One touch integrated start diode 41 G8V A relay T railer tow park lamp 42 G8V A relay T railer tow stop/turn lamp (left) 43 G8V A relay T railer tow stop/turn lamp (right) 44 G8V A relay Backup lamps relay 45 20A** T railer tow stop/turn lamps 46 15A** PCM vehicle p[...]

CHANGING THE TIRES If you get a flat tire while driving, do not apply the brake heavily . Instead, gradually decrease your speed. Hold the steering wheel firmly and slowly move to a safe place on the side of the road. Note: The tire pressure monitoring system (TPMS) indicator light will illuminate when the spare tire is in use. T o restore the full[...]

A dissimilar spare tire/wheel is defined as a spare tire and/or wheel that is different in brand, size or appearance from the road tires and wheels and can be one of three types: 1. T -type mini-spare: This spare tire begins with the letter “T” for tire size and may have “T emporary Use Only” molded in the sidewall 2. Full-size dissimilar s[...]

The usage of a full-size dissimilar spare tire/wheel can lead to impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • W inter weather driving capability • W et weather driving capability • All-Wheel driving capability (if applicable) • Load leveling ad[...]

1. Remove the carpeted floor panel located in the rear of the vehicle, remove the wing nut that secures the spare tire by turning it counterclockwise. 2. Lift and remove the spare tire from the trunk. 3. Remove the second wing nut that secures the jack retention bracket by turning it counterclockwise, remove the jack kit from the vehicle. 4. Remove[...]

1. Block the diagonally opposite wheel. 2. Remove wheel cover (if equipped) with the lug wrench tip and loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground. 3. Put the jack in the jack notch next to the tire you are changing. T urn the jack handle clockwise until the wheel is comp[...]

7. Remove the jack and fully tighten the lug nuts in the order shown. Refer to Wheel lug nut torque specifications later in this chapter for the proper lug nut torque specification. 8. Install the wheel cover (if equipped). Stowing the tire and jack 1. Fully collapse the jack, fold the lug wrench socket into the handle and place the jack and wrench[...]

4. Insert the straight end of the jack retention bracket through the eyelet of the angled bracket and swing the retention bracket over the jack. W ith the jack in place, place the looped end of the retention bracket over the threaded stud in the trunk floor and secure it with the plastic wing nut. If you are stowing the flat tire, remove the L-shap[...]

T EMPORARY MOBILITY KIT (IF EQUIPPED) Y our vehicle may be equipped with a temporary mobility kit (located under the driver’ s seat). T o remove the temporary mobility kit, move the driver’ s seat fully forward and undo the V elcro 威 strap that attaches it to the rear of the seat frame. T o replace the temporary mobility kit, open the V elcro[...]

1. Air compressor (inside) 2. Diverter knob 3. On/Off switch 4. Air pressure gauge 5. Sealant bottle/canister 6. Sealant filling clear tube 7. Sealant tube — tire valve connector 8. Y ellow cap tool 9. Air compressor hose 10. Air hose — tire valve connector 11. Accessory power plug 12. Casing/housing General information W ARNING: Failure to fol[...]

• Read the information in the T ips for use of the temporary mobility kit section to ensure safe operation of the temporary mobility kit and your vehicle. Tips for use of the temporary mobility kit Read the following list of tips to ensure safe operation of the temporary mobility kit: • Before operating the temporary mobility kit, make sure you[...]

• Operating the temporary mobility kit could cause an electrical disturbance in radio and DVD player operation. What to do when a tire is punctured A tire puncture within the tire’ s tread area can be repaired in two stages with the temporary mobility kit: • In the first stage, the tire will be reinflated with a sealing compound and air . Aft[...]

4. Plug the power cable into the 12V power point in the vehicle. 5. Remove the warning sticker found on the canister and place it on the top of the instrument panel or the center of the dash. 6. Start the engine (only if the vehicle is outdoors or in a well-ventilated area) . 7. T urn dial (1) counterclockwise to the sealant position. T urn on the [...]

Note: When the sealing compound is first added into the tire, the air pressure gauge reading on the compressor unit may indicate a higher value; this is normal and should be no reason for concern. The pressure will drop after about 30 seconds of operation. The tire pressure has to be checked with the compressor in the OFF position to get the correc[...]

3. T urn the dial clockwise to the air position. T urn on the kit by pressing the on/off button. 4. Adjust the tire to the recommended inflation pressure from the tire label located on the driver’ s door or door jam area. Note: The tire pressure has to be checked with the compressor in the OFF position to get the correct tire pressure reading. 5.[...]

Removal of the Sealant Canister from the T emporary Mobility Kit 1. Unwrap the clear tube from the compressor housing. 2. Locate the yellow cap at the end of the clear tube. 3. Using the yellow cap tool, press the tab located on the temporary mobility kit compressor housing while pulling up on the sealant canister . Roadside Emergencies 350 2010 MK[...]

Installation of the Sealant Canister to the T emporary Mobility Kit 1. Align the sealant canister with the temporary mobility kit housing. 2. Once aligned, seat the sealant canister by lightly pushing down until you hear an audible click. 3. W rap the clear tube around the compressor housing. Roadside Emergencies 351 2010 MKT (mkt) Owners Guide, 1s[...]

Note: If you experience any difficulties with the removal or installation of the sealant canister , consult your Ford Motor Company authorized dealer for assistance. Be sure to check the sealant compound’ s “use by” date regularly . The “use by” date is on the lower right hand corner of the label located on the sealant canister (bottle). [...]

Note: Inspect the wheel pilot hole prior to installation. If there is visible corrosion in wheel pilot hole, remove loose particles by wiping with clean rag and apply grease. Apply grease only to the wheel pilot hole surface by smearing a “dime” (1 square cm) sized glob of grease around the wheel pilot surface (1) with end of finger . DO NOT ap[...]

Preparing your vehicle When the battery is disconnected or a new battery is installed, the automatic transmission must relearn its shift strategy . As a result, the transmission may have firm and/or soft shifts. This operation is considered normal and will not affect function or durability of the transmission. Over time, the adaptive learning proce[...]

2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery . 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery . + – + – + – + – Roadside Emergencies 355 2010 MKT (mkt) Owners Guide, 1st Printing USA (fus)[...]

4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle’ s engine, away from the battery and the carburetor/fuel injection system. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake manifold or electrical components as grounding points. W ARNING: Do not connect[...]

Removing the jumper cables Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery . 2. Remove the jumper cable on the negative (-) connection of the booster vehicle’ s batter[...]

3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’ s battery . 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’ s battery . After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle c[...]

WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or , if you are a member of a roadside assistance program, your roadside assistance service provider . It is recommended that your vehicle be towed with a wheel lift and dollies or flatbed equipment. Do not tow with a slingbelt. Ford Motor Company has not a[...]

If the vehicle is towed by other means or incorrectly , vehicle damage may occur . Ford Motor Company produces a towing manual for all authorized tow truck operators. Have your tow truck operator refer to this manual for proper hook-up and towing procedures for your vehicle. Emergency towing In case of a roadside emergency with a disabled vehicle ([...]

GETTING THE SERVICES YOU NEED W arranty repairs to your vehicle must be performed by an authorized Ford, Lincoln, or Mercury dealer . While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certai[...]

In Canada: Mailing address (Ford vehicles) Customer Relationship Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6J 5E4 T elephone 1-800-565-3673 (FORD) Online www .ford.ca Mailing address (Lincoln vehicles) Lincoln Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6J 5E4 T elephone 1-800-[...]

In the United States, a warranty dispute must be submitted to the BBB AUTO LINE before taking action under the Magnuson-Moss W arranty Act, or to the extent allowed by state law , before pursuing replacement or repurchase remedies provided by certain state laws. This dispute handling procedure is not required prior to enforcing state created rights[...]

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY) Y our satisfaction is important to Ford Motor Company and to your dealer . If a warranty concern has not been resolved using the three-step procedure outlined on the first page of the Customer Assistance section, you may be eligible to participate in the BBB AUTO LINE program. The BBB A[...]

UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those cases where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory , Ford of Canada participates in an impartial third part[...]

If your vehicle must be serviced while you are traveling or living in Central America, the Caribbean, or the Middle East, contact the nearest authorized dealer . If the authorized dealer cannot help you, contact: FORD MOTOR COMP ANY FORD EXPORT OPERA TIONS 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 U.S.A. T elephone: ([...]

REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying Ford Motor Company . If NHTSA receives similar complaints, it may open an investigation, and i[...]

W ASHING THE EXTERIOR W ash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, such as Motorcraft 威 Detail W ash (ZC-3-A), which is available from your authorized dealer . • Never use strong household detergents or soap, such as dish washing or laundry liquid. These products can discolor and spot painted surfaces. • [...]

W AXING • W ash the vehicle first. • Do not use waxes that contain abrasives; use Motorcraft 威 Premium Liquid W ax (ZC-53-A), which is available from your authorized dealer , or an equivalent quality product. • Do not allow paint sealant to come in contact with any non-body (low-gloss black) colored trim, such as grained door handles, roof [...]

ENGINE Engines are more efficient when they are clean because grease and dirt buildup keep the engine warmer than normal. When washing: • T ake care when using a power washer to clean the engine. The high-pressure fluid could penetrate the sealed parts and cause damage. • Do not spray a hot engine with cold water to avoid cracking the engine bl[...]

3.5L V6 EcoBoost engine PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products are available from your authorized dealer . • For routine cleaning, use Motorcraft 威 Detail W ash (ZC-3-A). • If tar or grease spots are present, use Motorcraft 威 Bug and T ar Remover (ZC-42). WINDOWS AND WIPER BLAD[...]

• The wiper blades can be cleaned with isopropyl (rubbing) alcohol or Motorcraft 威 Premium W indshield W asher Concentrate (ZC-32-A), available from your authorized dealer . This washer fluid contains special solution in addition to alcohol which helps to remove the hot wax deposited on the wiper blade and windshield from automated car wash fac[...]

If a staining liquid like coffee/juice has been spilled on the instrument panel or on interior trim surfaces, clean as follows: 1. W ipe up spilled liquid using a clean, white, cotton cloth. 2. W ipe the surface with a damp, clean, white cotton cloth. For more thorough cleaning, use a mild soap and water solution. If the spot cannot be completely c[...]

LEATHER SEATS (IF EQUIPPED) Y our leather seating surfaces have a clear , protective coating over the leather . • For routine cleaning, wipe the surface with a soft, damp cloth. For more thorough cleaning, wipe the surface with a mild soap and water solution. In Canada, use Motorcraft 威 Vinyl Cleaner (CXC-93). Dry the area with a soft cloth. ?[...]

Motorcraft 威 Premium Glass Cleaner (Canada only) (CXC-100) Motorcraft 威 Premium Liquid W ax (ZC-53-A) Motorcraft 威 Premium W indshield W asher Concentrate (U.S. only) (ZC-32-A) Motorcraft 威 Professional Strength Carpet & Upholstery Cleaner (ZC-54) Motorcraft 威 Spot and Stain Remover (U.S. only) (ZC-14) Motorcraft 威 T ire Clean and S[...]

SERVICE RECOMMENDATIONS T o help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy . If your vehicle requires professional service, your authorized dealer can provide the necessary parts and service. Check your W arranty Guide/Customer Information Guide to find out which parts and servi[...]

OPENING THE HOOD 1. Inside the vehicle, pull the hood release handle located at the bottom of the instrument panel near the steering column. 2. Go to the front of the vehicle and release the auxiliary latch using the handle that is located under the front passenger side of the hood. 3. Lift the hood until the lift cylinders hold it open. Maintenanc[...]

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 3.5L V6 EcoBoost engine 1. Engine coolant reservoir 2. Brake fluid reservoir 3. Battery 4. Power distribution box 5. Air filter assembly 6. Automatic transmission fluid dipstick (out of view) 7. Engine oil dipstick 8. Engine oil filler cap 9. W indshield washer fluid reservoir Maintenance and Specifi[...]

Engine shield Some vehicles may be equipped with an aero-shield under the engine. This shield needs to be removed for service, including oil and filter changes. It is secured with four screws. 3.7L V6 Duratec engine 1. Power steering fluid reservoir 2. Engine coolant reservoir 3. Brake fluid reservoir 4. Battery 5. Power distribution box 6. Air fil[...]

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if the level is low . In very cold weather , do not fill the reservoir completely . Only use a washer fluid that meets Ford specification WSB-M8B16-A2. Do not use any special washer fluid such as windshield water repellent type fluid or bug wash. They may cause squeaking, chatter noise, streak[...]

CHANGING THE WIPER BLADES 1. Pull the wiper blade and arm away from the glass. 2. Squeeze the locking tabs to release the blade from the arm and pull the blade away from the arm to remove it. 3. Attach the new blade to the arm and snap it into place. Replace wiper blades at least once per year for optimum performance. Poor wiper quality can be impr[...]

Changing rear window wiper blade The rear wiper arm is designed without a service position. This reduces the risk of damage to the blade in an automatic car wash. T o replace the wiper blade: 1. Grab the wiper arm with one hand close to the arm/blade joint and pull it as far away from the glass as possible. Do not use excessive force because it can[...]

5. Locate and carefully remove the engine oil level dipstick. 6. W ipe the dipstick clean. Insert the dipstick fully , then remove it again. • If the oil level is within this range, the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below this mark, engine oil must be added to raise the level within the normal operating range. ?[...]

• Do not overfill the engine with oil. Oil levels above this mark may cause engine damage. If the engine is overfilled, some oil must be removed from the engine by an authorized dealer . 7. Put the dipstick back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this [...]

Use SAE 5W -20 engine oil Only use oils “Certified For Gasoline Engines” by the American Petroleum Institute (API). An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricant Standardization and Approval Committee (ILSAC), comprised of U.[...]

For longer , trouble-free operation, keep the top of the battery clean and dry . Also, make certain the battery cables are always tightly fastened to the battery terminals. If you see any corrosion on the battery or terminals, remove the cables from the terminals and clean with a wire brush. Y ou can neutralize the acid with a solution of baking so[...]

Because your vehicle’ s engine is electronically controlled by a computer , some control conditions are maintained by power from the battery . When the battery is disconnected or a new battery is installed, the engine must relearn its idle and fuel trim strategy for optimum driveability and performance. T o begin this process: 1. W ith the vehicl[...]

ENGINE COOLANT Checking engine coolant The concentration and level of engine coolant should be checked at the intervals listed in scheduled maintenance information. The coolant concentration should be maintained at 50/50 coolant and distilled water , which equates to a freeze point of -34°F (-36°C). Coolant concentration testing is possible with [...]

If the engine coolant has not been checked at the recommended interval, the engine coolant reservoir may become low or empty . If the reservoir is low or empty , add engine coolant to the reservoir . Refer to Adding engine coolant in this chapter . Note: Automotive fluids are not interchangeable; do not use engine coolant, antifreeze or windshield [...]

For vehicles with overflow coolant systems with a non-pressurized cap on the coolant recovery system, add coolant to the coolant recovery reservoir when the engine is cool. Add the proper mixture of coolant and water to the FULL COLD level. For all other vehicles which have a coolant degas system with a pressurized cap, or if it is necessary to rem[...]

Y our cooling system may have a leak. Operating an engine with a low level of coolant can result in engine overheating and possible engine damage. Recycled engine coolant Ford Motor Company does NOT recommend the use of recycled engine coolant since a Ford-approved recycling process is not yet available. Used engine coolant should be disposed of in[...]

• Refer to the chart on the coolant container to ensure the coolant concentration in your vehicle will provide adequate protection at the temperatures in which you drive. V ehicles driven year -round in non-extreme climates should use a 50/50 mixture of engine coolant and distilled water for optimum cooling system and engine protection. Engine fl[...]

2. Leave the engine running until the coolant temperature gauge needle moves away from the H range. After several minutes, if this does not happen, follow the remaining steps. 3. T urn the engine off and wait for it to cool before checking the coolant level. W ARNING: Never remove the coolant reservoir cap while the engine is running or hot. 4. If [...]

When fail-safe mode is activated Y ou have limited engine power when in the fail-safe mode, so drive the vehicle with caution. The vehicle will not be able to maintain high-speed operation and the engine will run rough. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1. Pull off the[...]

W ARNING: Gasoline may contain benzene, which is a cancer -causing agent. Observe the following guidelines when handling automotive fuel: • Extinguish all smoking materials and any open flames before refueling your vehicle. • Always turn off the vehicle before refueling. • Automotive fuels can be harmful or fatal if swallowed. Fuel such as ga[...]

W ARNING: The flow of fuel through a fuel pump nozzle can produce static electricity , which can cause a fire if fuel is pumped into an ungrounded fuel container . Refueling W ARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. T o help avoid injuries to you and others: • Read and follow all the instructions on the pump [...]

4. After you are done pumping fuel, slowly remove the fuel filler nozzle—allow about five seconds after pumping fuel before removing the fuel filler nozzle. This allows residual fuel to drain back into the fuel tank and not spill onto the vehicle. Note: A fuel spillage concern may occur if overfilling the fuel tank. Do not overfill the tank to th[...]

Octane recommendations 3.7L V6 engine Y our vehicle will run normally on 87 octane regular fuel. Premium fuel will provide improved performance. 3.5L V6 EcoBoost engine Y our vehicle is designed to run on regular fuel with an octane rating of 87 or higher . For best overall performance, premium fuel with an octane rating of 91 or higher is recommen[...]

Cleaner air Ford endorses the use of reformulated “cleaner -burning” gasolines to improve air quality , per the recommendations in the Choosing the right fuel section. Running out of fuel A void running out of fuel because this situation may have an adverse effect on powertrain components. If you have run out of fuel: • Y ou may need to cycle[...]

1. After lifting the carpeted floor panel, locate the white plastic funnel. It is attached to the rear , lower edge of the spare tire compartment. 2. Slowly insert the funnel into the Easy Fuel™ system. 3. Fill the vehicle with fuel from the portable fuel container . 4. When done, clean the funnel or properly dispose of it. Extra funnels can be p[...]

Filling the tank The advertised fuel capacity of the fuel tank on your vehicle is equal to the rated refill capacity of the fuel tank as listed in the Maintenance product specifications and capacities section of this chapter . The advertised capacity is the amount of the indicated capacity and the empty reserve combined. Indicated capacity is the d[...]

5. Follow one of the simple calculations in order to determine fuel economy: Calculation 1: Divide total miles traveled by total gallons used. Calculation 2: Multiply liters used by 100, then divide by total kilometers traveled. Keep a record for at least one month and record the type of driving (city or highway). This will provide an accurate esti[...]

Maintenance • Keep tires properly inflated and use only recommended size. • Operating a vehicle with the wheels out of alignment will reduce fuel economy . • Use recommended engine oil. Refer to Maintenance product specifications and capacities in this chapter . • Perform all regularly scheduled maintenance items. Follow the recommended mai[...]

EMISSION CONTROL SYSTEM Y our vehicle is equipped with various emission control components and a catalytic converter which will enable your vehicle to comply with applicable exhaust emission standards. T o make sure that the catalytic converter and other emission control components continue to work properly: • Use only the specified fuel listed. [...]

Do not make any unauthorized changes to your vehicle or engine. By law , vehicle owners and anyone who manufactures, repairs, services, sells, leases, trades vehicles, or supervises a fleet of vehicles are not permitted to intentionally remove an emission control device or prevent it from working. Information about your vehicle’ s emission system[...]

Readiness for Inspection/Maintenance (I/M) testing Some state/provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. Y our vehicle may not pass the I/M test if the service engine [...]

POWER STEERING FLUID (EXCEPT ECOBOOST ENGINE) Refer to scheduled maintenance information. 1. Start the engine and let it run until it reaches normal operating temperature (the engine coolant temperature gauge indicator will be near the center of the normal area between H and C). 2. While the engine idles, turn the steering wheel left and right seve[...]

T RANSMISSION FLUID Checking automatic transmission fluid Refer to your scheduled maintenance information for scheduled intervals for fluid checks and changes. Y our transmission does not consume fluid. However , the fluid level should be checked if the transmission is not working properly , i.e., if the transmission slips or shifts slowly or if yo[...]

The transmission fluid should be within the cross-hatch area if at normal operating temperature 180°F-200°F (82°C-93°C). High fluid level Fluid levels above the safe range may result in transmission failure. An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage. High fluid levels can be ca[...]

W ARNING: T o reduce the risk of vehicle damage and/or personal burn injuries do not start your engine with the air cleaner removed and do not remove it while the engine is running. Changing the air filter element 3.7L V6 3.5L V6 (EcoBoost) 1. Release the clamps that secure the air filter housing cover . 2. Carefully separate the two halves of the [...]

6. Replace the air filter housing cover and secure the clamps. Be sure that the air cleaner cover tabs are engaged into the slots of the air cleaner housing. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not [...]

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES Items Capacity Ford Part Name or equivalent Ford Part Number / Ford Specification Brake fluid Between MAX and MIN on reservoir Motorcraft 威 High Performance DOT 3 Motor V ehicle Brake Fluid PM-1-C / WSS-M6C62-A or WSS-M6C65-A1 Door latch, hood latch, auxiliary hood latch, seat tracks, trunk and li[...]

Items Capacity Ford Part Name or equivalent Ford Part Number / Ford Specification Engine oil (3.7L V6 engine) 5.5 quarts (5.2L) • Motorcraft 威 SAE 5W -20 Premium Synthetic Blend Motor Oil (US) • Motorcraft 威 SAE 5W -20 Full Synthetic Motor Oil (US) • Motorcraft 威 SAE 5W -20 Super Premium Motor Oil (Canada) • Motorcraft 威 SAE 5W20 Sy[...]

Items Capacity Ford Part Name or equivalent Ford Part Number / Ford Specification Power steering fluid (except EcoBoost engine) Between MAX and MIN on reservoir Motorcraft 威 MERCON 威 VA T F XT -5-QM / MERCON 威 V Fuel tank 18.6 gallons (70.4L) —— W indshield washer fluid T op- off fluid as needed Motorcraft 威 Premium W indshield W asher [...]

ENGINE DATA Engine 3.7L V6 engine 3.5L V6 EcoBoost engine Cubic inches 226 214 Fuel See Octane recommendations earlier in this chapter . See Octane recommendations earlier in this chapter . Firing order 1–4–2–5–3–6 1–4–2–5–3–6 Spark plug gap 0.052–0.056 inch (1.32–1.42 mm) 0.033–0.037 inch (.838– .939 mm) Ignition system[...]

IDENTIFYING YOUR VEHICLE Safety Compliance Certification Label The National Highway T raffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label is located on the structur[...]

V ehicle identification number (VIN) The vehicle identification number is located on the driver side instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identification number . The V ehicle Identification Number (VIN) contains the following information: 1. W orld manufacturer identifier 2. Brake system / Gross [...]

T RANSMISSION CODE DESIGNATIONS Y ou can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents. Description Code 6F50 6–Speed Automatic T ransmission J 6F55 6–Speed Automatic T ransmission (with EcoBoost) G Maintenance and Specifications 418 2010 MKT (mkt) Ow[...]

GENUINE LINCOLN ACCESSORIES FOR YOUR VEHICLE A wide selection of Genuine Lincoln Accessories are available for your vehicle through your local Lincoln or Ford of Canada dealer . These quality accessories have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and aerodynamic appearance of[...]

For maximum vehicle performance, keep the following information in mind when adding accessories or equipment to your vehicle: • When adding accessories, equipment, passengers and luggage to your vehicle, do not exceed the total weight capacity of the vehicle or of the front or rear axle (GVWR or GA WR as indicated on the Safety Compliance Certifi[...]

FORD ESP EXTENDED SERVICE PLANS More than 30 million Ford, Lincoln, and Mercury owners have discovered the powerful protection of Ford ESP . It is the only extended service plan backed by Ford Motor Company , and provides “peace of mind” protection beyond the New V ehicle Limited W arranty coverage. Up to 500+ Covered V ehicle Components There [...]

Ford ESP Can Quickly Pay for Itself One service bill – the cost of parts and labor – can easily exceed the price of your Ford ESP Service Contract. W ith Ford ESP , you minimize your risk for unexpected repair bills and rising repair costs. A void the rising cost of properly maintaining your vehicle! Ford ESP also offers a Premium Maintenance P[...]

Ford Extended Service Plan 423 2010 MKT (mkt) Owners Guide, 1st Printing USA (fus)[...]

A Accessing the help screen ......... 51 Accessing the music in your jukebox ........................................ 47 Accessing your calendar ............ 51 Accessory delay ........................ 119 Active Park Assist .....................305 Adaptive Cruise Control ...........124 AdvanceT rac .............................. 287 Air cleaner f[...]

Car2U 威 Home Automation System ....................................... 139 Cargo area shade ...................... 148 Cargo net ................................... 148 CD ................................................ 44 Cell phone use .............................. 8 Changing a tire ......................... 336 Child safety seats ...........[...]

E Electronic message center ......... 18 Emergencies, roadside jump-starting .......................... 353 running out of fuel ......... 353, 399 Emission control system ..........404 Engine ........................................ 415 cleaning ................................... 370 coolant ..................................... 388 fail-safe cool[...]

turning on and off ....................96 Heating heating and air conditioning system ....................................... 89 Home screen ............................... 35 Homelink wireless control system ........................................ 135 Hood .......................................... 377 I Ignition ............................... 2[...]

automatic dimming rearview mirror ...................................... 120 fold away ................................. 121 heated ................................ 89, 121 programmable memory .......... 159 side view mirrors (power) .....120 Mobile media system .................. 32 Moon roof .................................. 133 Motorcraft 威 p[...]

Roadside assistance .................. 325 S Safety belts (see Safety restraints) .......... 197, 200, 202–205 Safety Canopy ...................220, 222 Safety defects, reporting .......... 367 Safety restraints ........... 197, 200, 202–205 Belt-Minder 威 ........................... 207 extension assembly ................ 206 for adults .....[...]

sidewall information ............... 255 snow tires and chains ............266 spare tire ................................. 336 T emporary mobility kit .......... 343 terminology ............................. 247 tire grades ............................... 247 treadwear ........................ 246, 251 T owing .....................................[...]