GE ZDIS15 Bedienungsanleitung

GE M on ogram ® Owner’ s Manual ZDI15 and ZDIS15 Automatic Icemaker monogram.com[...]

Consumer Information Icemaker 2 Intr oduction Y our new Monogram icemaker makes an eloquent statement of style, convenience and kitchen planning flexibility . Whether you chose it for its purity of design or the assiduous attention to detail, you’ll find that your Monogram icemaker’ s superior blend of form and function will delight you for yea[...]

3 If you r eceived a damaged icemaker Immediately contact the dealer (or builder) that sold you the icemaker . If you need ser vice T o obtain ser vice, see the Consumer Ser vices page in the back of this manual. W e’re proud of our ser vice and want you to be pleased. If for some reason you are not happy with the ser vice you receive, follow the[...]

IMPOR T ANT SAFETY INSTRUCTIONS READ AND SA VE THESE INSTRUCTIONS Before it is used, the icemaker must be properly installed and located as described in this manual. W ARNING –T o reduce the risk of fire, electrical shock or injur y when using your icemaker , follow basic precautions including the following: • Never allow children to operate, p[...]

IMPOR T ANTES INSTRUCTIONS DE SÉCURITÉ LIRE ET CONSER VER CES INSTRUCTIONS Avant son utilisation, la machine à glaçons doit être bien installée et située selon la description dans ce manuel. A VERTISSEMENT : Pour réduire les risques d’incendie, de choc électrique ou de blessure lors de l’utilisation de la machine à glaçons, suivre le[...]

HOW TO CONNECT ELECTRICITY Do not, under any circumstances, cut or remove the third (gr ound) prong fr om the power cord. For personal safety , this appliance must be properly gr ounded. The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibilit[...]

7 CFC DISPOSAL Old refrigeration products have cooling systems that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone. If you are throwing away an old refrigeration product, make sure the CFC refrigerant is removed for proper disposal by a qualified ser vicer . If you intentionally release this CFC refrigerant you can b[...]

USE OF EXTENSION CORDS Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord. However , if you must use an extension cord, it is absolutely necessary that it be a UL-listed (in the United States) or a CSA-listed (in Canada), 3-wire grounding type appliance extension cord having a gr[...]

SA VE THESE INSTRUCTIONS USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada) However , if you must use an adapter , where local codes permit, a temporar y connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores. The larger slot in the adapter must be aligned wi[...]

10 Controls and Features Icemaker Remove packaging IMPORT ANT : Do not remove any permanent instruction labels inside your icemaker or the T ech Sheet that is fastened behind the lower access panel. • Remove tape and any labels from your icemaker before using (except the model and serial number label). T o remove any remaining tape or glue, rub t[...]

Controls and Features Icemaker 11 Featur es of your icemaker Light switch Control panel Cutter grid cover Water pan Model & serial numbers Ice retainer baffle Lower access panel Ice level sensor Magnetic door catch Ice scoop Cleaning cycle light[...]

12 Operating Instructions Icemaker How your icemaker works When you first start your icemaker , the water pan will fill and the system will rinse itself before starting to make ice. The rinsing process takes about five minutes. Under normal operating conditions, the icemaker will cycle at preset temperatures. The ice level sensor located in the ice[...]

Icemaker system 1. Push the selector switch to OFF . 2. W ait 5 to 10 minutes for the ice to fall into the storage bin. Remove all ice from the storage bin. 3. Unscrew the drain cap from the bottom of the water pan located inside the storage bin as shown. Allow the water to drain completely . 4. Replace the drain cap. 5. Use one 16 oz. bottle of Ni[...]

14 Care and Cleaning Icemaker Condenser A dirty or clogged condenser: • Prevents proper air flow . • Reduces ice making capacity . • Causes higher than recommended operating temperatures which may lead to component failure. 1. Unplug the icemaker or disconnect power . 2. Remove the 2 screws in the lower access panel and the 2 screws from the [...]

15 Care and Cleaning Icemaker Interior 1. Unplug the icemaker or disconnect power . 2. Open the storage bin door and remove any ice that is in the bin. 3. Remove the drain cap from the water pan and drain thoroughly . Replace the drain cap. 4. Remove the three screws that hold the cutter grid cover in place. 5. Unplug the wiring harness from the le[...]

16 Care and Cleaning Icemaker Light bulb r eplacement The icemaker has a light bulb in the top of the storage bin. T o replace it, open the bin door and follow these instructions: 1. Unplug the icemaker or disconnect power . 2. Remove the 3 screws that hold the cutter grid cover in place. Reach behind the control panel and pull the light bulb down.[...]

17 Preparation Icemaker Fr ont leveling legs Y our icemaker has 2 adjustable leveling legs to help you steady the product and make sure it is level. 1. Place a carpenter’ s level on top of the icemaker to make sure it is level from front to back and side to side. 2. Lift the top front of the icemaker to locate the leveling screws that are on the [...]

18 Reversing the Door Swing Icemaker T o r everse the door TOOLS NEEDED: 5 ⁄ 16 ″ wrench, 1 ⁄ 4 ″ wrench, flat putty knife, Phillips screwdriver Parts Supplied: Parts Identification: (For Reference Only) IMPORT ANT : Before you begin, unplug the icemaker or disconnect power . T o remove door from hinges: 1 . Remove the handle screws and lif[...]

Reversing the Door Swing Icemaker T o replace door on hinges: 1. Place plastic hinge sleeve on bottom hinge and position the door on the pin. 2. Place plastic hinge sleeve in the top hinge hole on the door . Align the door on the bottom hinge and replace the top hinge pin. 3. Replace the handle and handle screws. T o reverse the door catch: 1. Remo[...]

The Problem Solver Icemaker 20 Questions? Use this pr oblem solver! GRID IS NOT CUTTING ICE SHEETS ICEMAKER PUMPS CONTINUOUSL Y , BUT PRODUCES NO ICE • Power cord is not plugged into a live outlet. • The control is set at OFF . • The fuse is blown/circuit breaker is tripped. Replace fuse or reset the breaker . • Room temperature is colder t[...]

21 General Electric Company W ar ranty Registration Depar tment P .O. Box 32150 Louisville, KY 40232-2150 Place 1st Class Letter Stamp Here GE Appliances Consumer Pr oduct Ownership R egistration Impor tant Mail T oday[...]

22 Consumer Pr oduct Ownership R egistration Dear Customer: Thank you for purchasing our product and thank you for placing your confidence in us. W e are proud to have you as a customer! Follow these three steps to pr otect your new appliance investment: 1 Complete and mail your Consumer Product Ownership Registration today . Have the peace of mind[...]

23 Consumer Ser vices Icemaker With the purchase of your new Monogram appliance, receive the assurance that if you ever need infor mation or assistance from GE, we’ll be there. All you have to do is call---toll- free! GE Answer Center ® In the USA: 800.626.2000 Whatever your question about any Monogram major appliance, GE Answer Center ® inform[...]

W arranty Icemaker YOUR MONOGRAM ICEMAKER W ARRANTY Staple sales slip or cancelled check here. Pr oof of original purchase date is needed to obtain ser vice under war ranty . WHA T IS COVERED Fr om the Date of the Original Pur chase FULL ONE-YEAR W ARRANTY For one year from date of original purchase, we will provide, free of charge, parts and ser v[...]