Gefen EXT-HD-DSWFP Bedienungsanleitung

®[...]

ASKING FOR ASSIST ANCE T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM PST Monday thru Friday . Write T o: Gefen LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .gefen.com ds@gefen.com Notice Gefen LLC reserves the right to make changes in the hard wa[...]

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Front Panel Layout 5 Front Panel Descriptions 6 Back Panel Layout 7 Back Panel Descriptions 8 Side Panel Layout 9 Side Panel Descriptions 10 Connecting the Digital Signage Player with Wi-Fi Plus 10 Wiring Diagram 1 1 Operating the Digital Signage Player with Wi-Fi Plus 1 1 Powering the Digital [...]

1 INTRODUCTION Congratulations on your purchase of the Digital Signage Player with Wi-Fi Plus. Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play pr[...]

OPERA TION NOTES 2 READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE HD DIGIT AL SIGNAGE MEDIA PLA YER • The maximum internal storage capacity of the Digital Signage Player is 4 GB. However , an additional CF (Compact Flash) card can be installed to expand the total available memory . CompactFlash cards up to 16 GB are supported. NOTE: Using [...]

3 FEA TURES Features • Supports MPEG-1, MPEG-2, MPEG L2, MP3, H.264/MPEG-4, and VC-1 codec formats. • Live video input using the included Composite cables. • Real-time clock with battery backup. • Automatic error recovery with built-in WDT . • Auto-play starts playing scheduled contents automatically . • 4 GB of built-in memory (expanda[...]

4 Front Panel FRONT P ANEL LA YOUT 1 2 3 4 5 6 7[...]

5 FRONT P ANEL DESCRIPTIONS Front Panel 1 A V Out Connect the included 3.5 mm mini-stereo to RCA cable to this output connector . 2 Reset Press this button while performing a system reset. See page 54 for details. 3 LED Indicators The Green LED indicates that the unit is powered. The Y ellow LED indicates data fl ow but is primarily used when perf[...]

6 BACK P ANEL LA YOUT Back Panel 1 2[...]

7 BACK P ANEL DESCRIPTIONS 1 RS-232 Connect the included RS-232 to Ethernet adapter to this port. 2 A/V In Allows devices such as TV tuners and video cameras to be connected to the Digital Signage Player with Wi-Fi, using a 3.5 mm composite A/V cable.[...]

8 SIDE P ANEL LA YOUT Side Panel 1 2 3[...]

9 SIDE P ANEL DESCRIPTIONS 1 12 V DC Connect the included 12 V DC locking power supply to this connector . 2 HDMI Out Connect an HDTV to this port using an HDMI cable. 3 VGA Out Connect an VGA monitor to this port using a VGA cable.[...]

10 CONNECTING THE DIGIT AL SIGNAGE PLA YER WITH WI-FI PLUS How to Connect the Digital Signage Player with Wi-Fi Plus 1. Connect an HDMI cable between the display and the HDMI connector on the Digital Signage Player with Wi-Fi Plus. There are two options for connecting the Player to a network: i. Connect an Ethernet cable from the network to the bac[...]

11 OPERA TING THE DIGIT AL SIGNAGE PLA YER WITH WI-FI PLUS Powering the Digital Signage Player After connecting power to the unit, the following screen will be displayed: The boot process will take approximately 90 seconds. Once the boot process has successfully completed, the Digital Signage Player will be ready to sync content using the USB port.[...]

12 MENU SYSTEM Connecting the USB Keyboard In order to con fi gure the Digital Signage Player , a USB keyboard must be attached to the back panel of the unit. Once a USB keyboard is connected to the unit, it will take approximately 30 seconds for the Main Menu to be displayed: Once the Main Menu is displayed, use the Arrow (cursor) keys, Spacebar [...]

13 MENU SYSTEM Setting the Output Resolution For the best quality video, make sure that the output resolution matches the native resolution of the display . For example, if the Digital Signage Player is being connected to an LCD display , the native resolution will most likely be 1366 x 768, 1280 x 720 (720p), or 1920 x 1080 (1080p). 1. Select the [...]

14 MENU SYSTEM Setting the Content Source If the Digital Signage content is stored on a server , the server URL must be speci fi ed. Once the Digital Signage Player is fi nished booting, the unit will retrieve the content from the speci fi ed server . This process is not required if using a USB drive for playing Digital Signage content. 1. Selec[...]

15 MENU SYSTEM Changing the name of the Digital Signage Player When using the Digital Signage Player on a network, it is useful to provide a speci fi c name to the player . By default, a random alphanumeric number is used. 1. From the Content Source dialog, select the Player Name option. 2. T ype in the desired name of the player . Press the Enter[...]

16 MENU SYSTEM Connecting the Digital Signage Player to a Network using DHCP 1. Highlight the Network Setting option in the Main Menu. The Digital Signage Player will automatically scan for wireless networks during the boot-up sequence. When an Ethernet connection is used, the Wi-Fi will be disabled. Press the Enter key to display the Network Setti[...]

17 MENU SYSTEM Under the IP Con fi guration dialog, select between: • DHCP • Static IP By default, DHCP is enabled. The DHCP setting will automatically assign a network IP address for the Digital Signage Player . If DHCP will be used, then no further network con fi guration should be necessary . 4. Press the Enter key to return to the Network[...]

18 MENU SYSTEM Connecting the Digital Signage Player to a Network using a Static IP 1. Select the Static IP option and press the Spacebar to place an asterisk next to it. Press the Enter key to continue. The Static IP dialog will be displayed. 2. Entered the following information in the Static IP dialog: • IP address • Netmask • Gateway addre[...]

19 MENU SYSTEM Connecting the Digital Signage Player to a Network using Wi-Fi The Digital Signage Player will automatically scan for wireless networks during the boot-up sequence. However when an Ethernet connection is used, the Wi-Fi will become disabled. 1. T o con fi gure the Digital Signage Player for Wi-Fi use, select Network Setting from the[...]

20 MENU SYSTEM 4. Use the Arrow keys to highlight the desired Wi-Fi network, then press the Spacebar to select it. Press the Enter key to connect to the wireless network. 5. Enter the correct password (if required) and press the Enter key to connect to the network. 6. Select Done from the Main Menu and select Y es to save the changes. Manually Con [...]

21 MENU SYSTEM 2. Enter the SSID of the wireless device that the Digital Signage Player will connect with. In the example below , the SSID is “Gefen Wireless”. Once the SSID has been entered, press the Enter key to continue. 3. Highlight the security option to be used when connecting to the network: The Digital Signage Player supports the follo[...]

22 MENU SYSTEM Changing the Proxy T ype 1. T o con fi gure the proxy settings, select Network Setting from the Main Menu. 2. HIghlight Proxy Setting and press the Enter key . The Proxy Setting dialog provides the following options: • Proxy T ype • Proxy Server 3. Highlight Proxy T ype, then press the Enter key . The Digital Signage Player supp[...]

23 MENU SYSTEM Changing the Proxy Server 1. Select Proxy Server from the Proxy Settings dialog, then press the Enter key . 2. Enter the required information in the Proxy Server dialog box: • Host • Port • User • Password 3. Use the Change option to modify the information in each fi eld. After each fi eld has been fi lled with the proper [...]

24 MENU SYSTEM Setting the Internal Clock 1. T o set the clock, highlight the T ime Setting option in the Main Menu. Both the local time and the time zone can be set from within this menu. Press the Enter key to display the T ime Setting dialog. The T ime Setting dialog allows you to set the following options: • Local T ime • T ime Zone • T i[...]

25 MENU SYSTEM 4. After the day has been set, press the Enter key to set the time. The time is represented in 24-hour format. 5. After setting the day and time, press the Enter key to con fi rm the changes. 6. Select Done from the Main Menu to save the changes. Setting the Time Zone 1. T o set the clock, highlight the T ime Zone option under the T[...]

26 MENU SYSTEM The following time zone settings are available: • (GMT - 1 1:00) Midway Island, Samoa • (GMT - 10:00) Hawaii • (GMT - 09:00) Alaska • (GMT - 08:00) Paci fi c (Mexico) • (GMT - 08:00) Paci fi c (US and Canada) • (GMT - 07:00) Mountain • (GMT - 07:00) Arizona • (GMT - 07:00) Mexico (Chihuahua, La Paz, Mazatlanst) • [...]

27 MENU SYSTEM • (GMT + 05:00) Pakistan • (GMT + 05:00) Russia Zone 04 (Y ekaterinburg, Perm, Ufa) • (GMT + 05:30) India (Calcutta) • (GMT + 05:45) Nepal • (GMT + 06:00) Bangladesh • (GMT + 06:00) Russia Zone 05 (Novosibirsk, Omsk) • (GMT + 06:30) Cocos (Keeling) Islands • (GMT + 06:30) Myanmar • (GMT + 07:00) Cambodia, W estern I[...]

28 MENU SYSTEM Setting the Time Server 1. Select T ime Server from the T ime Settings menu and press the Enter key . The currently selected time server will be displayed, along with two other options: • Content Source • Custom... In the example above, www .google.com is speci fi ed as a timer server . If the Content Source option is selected, [...]

29 MENU SYSTEM 3. Press the Enter key and select from one of the protocol options: • T ime Protocol (RFC-868) • HTTP Date Header 4. Highlight the desired protocol and press the Spacebar to select it. Press the Enter key to con fi rm the changes and return to the Custom T ime Server dialog. 5. Change the server by highlighting Server and pressi[...]

30 MENU SYSTEM Setting a Password In order to prevent access to the Digital Signage Player or modi fi cation of the settings, it is recommended that a password be created to prevent unauthorized access. 1. T o set the password, highlight the Change Password option in the Main Menu and press the Enter key . 2. Enter the password under the Change Pa[...]

31 MENU SYSTEM Undo Changes Any changes made to the Digital Signage Player can be reset to their previous state by selecting the Under Changes option from the Main Menu. 1. Select Under Changes from the Main Menu. 2. Press the Enter key . The following dialog will be displayed: By default, the No option is highlighted. Select Y es, then press the E[...]

32 MENU SYSTEM Saving Changes / Exiting the Main Menu After exiting the Main Menu, the Digital Signage Player will display a dialog, allowing all changes to be saved. Any changes made within the Main Menu must be saved in order to take effect. When changes are saved, the Digital Signage Player will reboot. 1. Select <Done> on the Main Menu. 2[...]

33 SIGNAGE MANAGER EXPRESS Installing the Signage Manager Express The Signage Manager Express allows the creation and publishing of digital signage presentations and playback schedules. Minimum System Requirements: • 1 GHz AMD or Intel CPU • 512 MB RAM • Windows XP , Windows V ista, or Windows 7 • DirectX 9 • Microsoft .NET framework 3.0 [...]

34 SIGNAGE MANAGER EXPRESS Creating a Simple Digital Signage Presentation This section will cover the process of creating a simple Digital Signage presentation. In the following example, the Digital Signage Player will be connected to the network using an Ethernet cable. 1. Connect to the network using Wi-Fi or connect an Ethernet cable from the Et[...]

35 SIGNAGE MANAGER EXPRESS 4. Click the icon in the top left corner of the Signage Manager Express and select Full HD Open API Media Player V2 from the list of available units. IMPORT ANT : Do not select a player other than the The Full HD Open API Media Player V2. Other players will not be compatible with this software. 5. Click the Looping icon. [...]

36 SIGNAGE MANAGER EXPRESS Layout format selection 6. The Signage Manager Express allows different aspect ratios to be selected. The aspect ratio is applied to both a single pane or multiple panes. The use of multiple panes is illustrated on page 46. For this example, select the 4:3 aspect ratio. 7. Click the Layout Format button and select Full Sc[...]

37 SIGNAGE MANAGER EXPRESS Adding the Content 1. From the list of layouts to the right, click on the Full Screen layout to the far left. The selected layout is a 4:3 full-screen layout. Video (with audio) or images can be placed in this area. 2. Click the Add button. Clicking the Add button allows you to add media fi les to the Digital Signage pre[...]

38 SIGNAGE MANAGER EXPRESS 3. For this example, select an image on your computer . After the image has been selected, click the Open button. The selected image will now appear under the Recent Items tab and the Media Files window . Select the image Click the Open button[...]

39 SIGNAGE MANAGER EXPRESS 4. Add a second image by repeating steps 2 and 3. Ingesting the Content The term “ingesting” (or “ingestion”) refers to the process whereby a Digital Signage client device is uploaded with content. The Signage Manager Express refers to this process as exporting . 1. Click the Proceed to export button to prepare th[...]

40 SIGNAGE MANAGER EXPRESS Before uploading the content to the Digital Signage Player , take note of the new information provided by this window: Selects how the content will be transferred to the unit. Lists the Media fi les and/or Playlists which will be used in publishing the content. Displays information about each Player , such as IP address,[...]

41 SIGNAGE MANAGER EXPRESS Detects all players on the network, if they are not discovered by the software. Selects all Players in the list. Goes back to the Schedule screen. Deselects all Players in the list Exports the current content to the Player Adds a Player to the list. Deletes the selected Player from the list.[...]

42 SIGNAGE MANAGER EXPRESS 2. Click the Proceed button to upload the content to the Digital Signage Player . The Digital Signage Player will indicate that it is ingesting the content by displaying “Preparing...”, in the player list. Indicates that the content is being uploaded Press the Cancel button to cancel the ingestion process[...]

43 SIGNAGE MANAGER EXPRESS 3. After the content has been ingested, the Player will display “Complete”. The Digital Signage content begin playing on the display connected to the Digital Signage Player . The Log button can be pressed to view upload activity . If necessary , use the scroll button on the side of the LogViewer dialog to view all pre[...]

44 SIGNAGE MANAGER EXPRESS Changing the Display Interval By default, the display interval between the images is set to 7 seconds. This interval can be changed. 1. Click the Back to schedule button on the top portion of the menu. 2. Highlight one of the images under the Media fi les window and right click the mouse to bring up the context menu. The[...]

45 SIGNAGE MANAGER EXPRESS 4. Click the box next to the Duration, and change the value from 7 seconds to 10 seconds. 5. Click the Save button. 6. Click the Proceed button at the bottom of the window . Then, click on the Proceed button again, on the next window . The content on the Digital Signage Player will be updated. The fi rst image will be di[...]

46 SIGNAGE MANAGER EXPRESS Adding Video The Digital Signage Player has the ability to add video to your presentation as well as images. In addition, this model (EXT -HD-DSWFP) of the Digital Signage Player allows you to add Composite video from an external source, making this product ideal for broadcasting live events into your presentation. Method[...]

47 SIGNAGE MANAGER EXPRESS Note that this template also has a T icker window . This window can be used to display text by scrolling or crawling the text. We will cover this feature as well. The video window is currently highlighted. Y ou can select the active window by clicking in each of the four (4) windows or use the window selection but- tons j[...]

48 SIGNAGE MANAGER EXPRESS 2. Click the Add button to add the movie fi le. 3. Select the movie fi le and click the Open button. The movie fi le will appear under both the Media fi les window and the Recent Items window: 4. As with any image fi le, you can right-click on the movie fi le, in the Media window , to adjust the playback properties.[...]

49 SIGNAGE MANAGER EXPRESS Combining Images with Video 1. Select the upper right corner window , as shown below , by left-clicking the mouse. This window will only accept an image fi le, as denoted by the image icon. 2. Drag one of the images from the Recent Items window to the Media fi les window .[...]

50 SIGNAGE MANAGER EXPRESS Since these two images were part of our previous presentation, they will appear under the Recent Items window and be available for other projects. 6. Select the image window on the lower right corner of the template and drag the other image to the Media Files window . Method 2: Incorporating Video from an External Source [...]

51 SIGNAGE MANAGER EXPRESS 2. Highlight the movie fi le under the Media tab and click the Remove button. A warning dialog will be displayed, asking you to con fi rm the removal of the fi le from the project. Click the OK button. 3. Click the arrow next to the Add button to select External audio-visual content. 4. Highlight (external audio-visual[...]

52 SIGNAGE MANAGER EXPRESS Adding a Ticker In addition to video, audio, and graphics, the Digital Signage Player also allows you to add a text ticker to your Digital Signage presentations. A text ticker is ideal for presenting headlines or minor pieces of news to your audience. The ticker can run at the top, bottom, or both the top and the bottom o[...]

53 SIGNAGE MANAGER EXPRESS 5. Click the Background color to bring up the color picker . 6. Change the color to black and click the OK button. 7. For now , leave the Font color white. 8. Select the Crawl ticker option and leave the speed set to Normal speed. Then, click the Save button. 9. Click the Proceed to export button, then click the Export bu[...]

54 RESETTING THE DIGIT AL SIGNAGE PLA YER Restoring Factory Default Settings If you forget the Menu System password or need to restore the Digital Signage Player to the factory settings, the unit will need to be reset. 1. Disconnect power from the Digital Signage Player . 2. Press and hold the Reset button on the front panel with a pin or the end o[...]

55 NETWORK CABLE WIRING DIAGRAM 12345678 Gefen recommends the TIA/EIA-568-B wiring option. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Pin Color 1 Orange / White 2 Orange 3 Green / White 4 Blue 5 Blue / White 6 Green 7 Brown / White 8 Brown CA T -5, CA T -5e, and CA T -6 cabling comes in stranded and[...]

56 SPECIFICA TIONS HDMI Output Connector .................................................. (1) T ype A 19-pin, female Composite Video / Audio Connector ................................... (2) 3.5 mm mini-stereo VGA Output Connector ............................................................... (1) HD-15, female USB Connectors.....................[...]

57 W ARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanica[...]

Rev A2 Pb This product uses UL listed power supplies.[...]