Geha compact 225 Bedienungsanleitung

1 English T able of Contents ................................................................................... 1 Usage Notice .......................................................................................... 2 Safety Information ......................................................................................... 2 Precautions.......[...]

2 English Usage Notice Safety Informations The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magni - tude to constitute a risk of electric shock to persons. The exclamation point within a[...]

3 English Usage Notice  When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on pages 44-45. Precautions Please follow all warnings, precautions and maintenance as recommended in this user[...]

4 English Usage Notice Do:    Turn off the product before cleaning.    Use a soft cloth moistened with a mild detergent to clean the display housing.    Disconnect the power plug from the AC outlet if the product is not being used for a long period of time. Don’t:    Do not block the ventilation slots and openi[...]

5 English Usage Notice Eye Safety Warnings ▀ ■ Avoid staring directly into the projector’s beam of light at all times. ▀ ■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀ ■ Using a stick or laser pointer is recommended to avoid the need for the presenter to enter the beam. ▀ ■ Ensure that [...]

6 English Introduction Product Features This product is a XGA single chip 0.55” DLP ® projector. Outstanding features include:  True XGA, 1024 x 768 addressable pixels  Texas Instruments Single chip DLP ® Technology  NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV compatible (480i/p, 576i/p, 720p, 1080i)  Auto source detection with use[...]

7 English Introduction Power Cord IR Remote Control Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Documentation :  User’s Manual  Quick Start Card  Warranty Card  WEEE Card  Due to the difference [...]

8 English Introduction 1. Control Panel 2. Zoom 3. Focus 4. Zoom Lens Main Unit Product Overview 5. IR Receiver 6. Tilt-Adjustment Foot 7. Connection Ports 8. Power Socket 8 1 3 2 4 5 6 1 3 2 7[...]

9 English Introduction Control Panel 1. Enter 2. Keystone Correction 3. Source 4. Four Directional Select Keys 5. Menu 6. Temp LED 7. Power LED 8. Lamp LED 9. Re-Sync 10. Power 2 5 3 7 6 8 1 9 10 4 2[...]

10 English Introduction Connection Ports 1. USB Connector 2. VGA Input Connector (PC Analog Signal/Component Video Input/HDTV/SCART) 3. HDMI Connector 4. S-Video Input Connector 5. Composite Video Input Connector 6. Kensington TM Lock Port 7. Power Socket 4 3 2 7 6 1 5[...]

1 1 English Introduction Remote Control 1. Power On/Off 2. Laser LED 3. Laser Button 4. Enter/Mouse Left Click 5. PC/Mouse Control 6. Mouse Right Click 7. Brightness 8. Re-Sync 9. Enter 10. Zoom 11. Freeze 12. S-Video Source 13. Video Source 14. Number Buttons 15. Page Down 16. VGA Source 17. Blank 18. HDMI Source 19. Menu 20. Four Directional Sele[...]

12 English Installation VGA,DVI DVD player, Set-top Box HDTV receiver S-Video Output Video Output E62405SP R MOLEX Connecting the Projector  Due to the difference in applications for each country, some regions may have different accessories. 1.....................................................................................................[...]

13 English Installation Powering On the Projector 1. Open th e lens cap.  2. Ensure that the power cord and signal cable are securely connected.  T he Power LED will be Amber. 3. Turn on the lamp by pressing “Power” button either on the top of the projector or pressing “Power” button on the remote. The Power LED will ash green. The[...]

14 English Installation Warning Indicator  When the “LAMP” indicator lights red, it indicates prob - lem with the lamp and the projector will automatically shut down by itself. Please contact your local reseller or service center. See pages 47-48.  When the “TEMP” indicator lights red, it indicates the pro - jector has overheated. The[...]

15 English Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with tilt-adjustment foot for adjusting the image height. To raise the image: Use screw in foot to raise the image to the desired height angle and ne-tune the display angle  . To lower the image: Use screw in foot to lower the im[...]

16 English Installation Adjusting the Projector’s Zoom / Focus Adjusting Projection Image Size You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The pro - jector will focus at distances from 3.3 to 39.4 feet (1.00 to 12.0 meters). Zoom Lever Focus Ring Screen (Diagonal) Max. 25"[...]

17 English User Controls Control Panel Control Panel & Remote Control There are two ways for you to control the functions: Control Panel and Remote Control. Using the Control Panel Power Refer to the “Power On/Off the Projector” section o n pages 13-14. Menu Press “Menu” to launch the on-screen display (OSD) menu. To exit OSD, Press “[...]

18 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section o n pages 13-14. Laser Button Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. PC/ Mouse Control The PC/ Mouse Control can be used to control mouse movement. The mouse function i[...]

19 English User Controls Remote Control Page - Use the button to page down. Zoom Zoom the projector display in or out . HDMI Press “HDMI” to choose source from HDMI connector. Freeze Press “Freeze” to pause the screen image. Press this button again to unlock. Blank Momentarily turn off the video. Press this button again to unlock. S-Video P[...]

20 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select[...]

21 English User Controls Menu Tree %OXH%LDV )LOP9LGHR*UDSKLFV3& ',63/$< +'0,9*$69LGHR9LGHR :DUP0HGLXP&ROG ,0$*(_$'9$1&(' *UHHQ*DLQ 93RVLWLRQ 9,PDJH6KLIW =RRP (QJOLVK'HXWVFK)UDQ©DLV,WDOLDQR(VSD³RO3RUWXJX¬V 3ROVNL1HGHUODQGV̷[...]

22 English User Controls Image Display Mode There are many factory presets optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater.  sRGB: Standardised accurate color.  User: Memorize user’s own settings. Brightness Adjust the[...]

23 English User Controls Image | Color Color  Use or to select item. Use or to select Red, Green, or Blue for brightness (Gain) and contrast (Bias).  Adjust the Cyan, Magenta and Yellow colors or return to the factory default settings for advanced adjustment of the indi - vidual colors.[...]

24 English User Controls Image | Advanced Degamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input.  Film: for home theater.  Video: for video or TV source.  Graphics: for image source.  PC: for PC or computer source. White Peaking This adjustable item utilizes a new c[...]

25 English User Controls Image | Advanced Input Source Enable input sources. Press into the next menu as below and then use or to select. Press “Enter” to nalize the selection. The projector will not search inputs that are de-selected.[...]

26 English User Controls Display Format Use this function to choose your desired aspect ratio.  4:3: This format is for 4x3 input sources not enhanced for Wide screen TV.  16:9 I: This format is for 16x9 input sources, like widescreen PC, HDTV and DVD enhanced for Wide screen TV. (576i/p)  16:9 II: This format is for 16x9 input sources, li[...]

27 English User Controls Display window format 16 : 9 I format or or 16 : 9 II format 4 : 3 format Input Signal Display on Screen Display area Picture area[...]

28 English User Controls Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Zoom  Press the to reduce the size of an image.  Press the to magnify an image on the projection screen. H Image Shift Shift the projected image position horizontally. V Image S[...]

29 English User Controls Display PC Mode This Mode is only for use when using this projector unit with a PC signal, either via an Analog or Digital connector.  Wide: If your PC output is a wide screen format resolution, you must select this setting. Examples of Wide screen resolutions are: 720 x 400 / 854 x 480 / 1280 x 720 / 1280 x 768.  Nor[...]

30 English User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. Setup[...]

31 English User Controls Setup Projection  Front-Desktop The factory default setting.  Rear-Desktop When you select this function, the projector reverses the im age so you can project behind a translucent screen.  Front-Image Inverted When you select this function, the projector turns the image upside down.  Rear-Image Inverted When you[...]

32 English User Controls Setup | Signal Phase “Phase” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or ickering image, use this function to correct it. Frequency “Frequency” changes the display data frequency to match the frequency of your computer’s graphic card. If you experience a[...]

33 English User Controls Security  On: Choose “On” to use security verication when turning on the projector.  Off: Choose “Off” to be able to switch on the projector without password verication. Security Timer Select the time (Month/Day/Hour) function to set the number of hours which the projector can be used. Once this time has[...]

34 English User Controls ■ First Time: 1. T h ePasswo rdis4di g its,DEF AULTV ALU Eis“12 3 4” .( rsttime) 2. U se number buttons o n the re mote to s elect your pass word, and th e n press “ ”ke ytoco nr myo urselectio n. Change Password 1 . Pr es s “ ” to i nput old password. 2. U[...]

35 English User Controls Source Lock  On: The projector will search specied connection port.  Off: The projector will search for other signals if the current input signal is lost. High Altitude Choose “On” to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the project[...]

36 English User Controls Direct Power On Choose “On” to turn on Direct Power On mode. The projector will automatically power on when AC power is supplied, with - out pressing the “Power” key on the projector control panel or on the remote control. Auto Power Off (min) Set the countdown timer interval. The countdown timer will start, when th[...]

37 English User Controls Options | Lamp Settings STD Lamp Hours Display the projection time of using STD mode. BRIGHT Lamp Hours Display the projection time of using BRIGHT mode. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested re[...]

38 English Appendices Image Problems No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replac[...]

39 English Appendices 6. Select the “Change” button under the “Monitor” tab. 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display is lower than or equal to SXGA+ (1400 x 1050[...]

40 English Appendices Image is out of focus  Make sure the lens cap is removed.  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance 3.3 to 39.4 feet (1.0 to 12.0 meters) from the projector. Se e page 16. The image is stretched when displaying 16:9 DVD title When you play anamorphi[...]

41 English Appendices Intermission Problems The projector stops responding to all controls  If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Lamp burns out or makes a popping sound  When the lamp reaches its end of life, it will burn out and may make a loud popping sound. [...]

42 English Appendices Message Reminders  Fan failed:  Temperature warning:  Replacing the lamp:  Out of display range:[...]

43 English Appendices Remote Control Problems If the remote control does not work  Check the operating angle for the remote control is approximately ±22.5°.  Make sure there are no obstructions between the remote control and the projector. Move to within 6 m (20 ft) of the projector.  Make sure the batteries are inserted correctly.  M[...]

44 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at l ea[...]

45 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “Power ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to unscrew the 2 screws from the cover then push up and remove the cover.  5. Use a screwdriver to unscrew [...]

46 English Appendices Compatibility Modes  “ * ”compressed computer image. Mode Resolution V-Sync (Hz) Analog Digital VGA 640 x 480 60, 72, 75, 85 60, 72, 75, 85 VGA 720 x 400 70, 85 70, 85 SVGA 800 x 600 56, 60, 72, 75, 85 56, 60, 72, 75, 85 SVGA 832 x 624 72 72 XGA 1024 x 768 60, 70, 75, 85 60, 70, 75, 85 XGA 1152 x 864 60, 70, 75, 85 6[...]

49 English Appendices Regulation & Safety notices This appendix lists the general notices of your projector. FCC notice T h i s de v i c e h a s b e e n t e s t e d an d f o u n d t o c o m p l y wi t h t h e li mi ts for a Cla ss B d i gi ta l dev ic e pur su a nt to Part 15 of th e FC C ru le s . Th es e li mi t s ar e de s i gn e d to pr ov [...]

50 English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. T h i s d e v i c e m u s t a c c e p t a n y i n t e r f e r e n c e r e c e i v e d , i n c l u d i n g i n t e r f e r e n c e t h a t m a y[...]