Haier L26V6-A8K Bedienungsanleitung

Please READ this manual carefully before operating your TV, and retain it for future reference. LCD TV OWNER`S MANUAL MODEL : L26V6-A8K L32V6-A8K L37V6-A8K L42V6-A8K L26V6-A8 L32V6-A8 L37V6-A8 L42V6-A8 S[...]

Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. T o prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product. Read the following safety instruction before starting the[...]

1. Retain these Instructions ---the safety and operating instructions should be retained for Future reference. 2. Heed Warnings ---All warning on the appliance and in the operating instructions should be followed. 3. Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or Aerosol cleaners. Use only dry cloth for clea[...]

a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improp[...]

Table of Contents Accessories Remote controller User's manual Alkaline battery(AA) 2 Power cable STILL STILL SLEEP SLEEP PIP PIP TV/AV TV/AV P.STD P.STD S.STD S.STD H.LOCK H.LOCK CH.LIST CH.LIST EXIT EXIT SCAN SCAN SWAP SWAP TIMER TIMER ZOOM ZOOM ABC@ ABC@ DEF DEF JKL% JKL% GHI$ GHI$ MNO MNO STUV STUV POR& POR& WXYZ WXYZ *#() *#() MUTE[...]

Front control panel -This is a simplified representation of front panel. -Here shown may be somewhat dif ferent from your TV. Buttons and interface location The buttons are on the bottom of the TV set) MENU TV/AV P- 1.MENU: menu display . 2.TV/A V: all input source display. 3.P-/P+ : program minus and plus, menu options. 4.V -/V+: volume decrease a[...]

HDMI/DVI Input Connect the monitor output connector from a DVD player to the appropriate input port. ANT IN HDMI/DVI IN1 PC IN Pr/Cr Pb/Cb Y IN2 SCART2 SCART1 DVD/DTV Input (Component ) Connect a component video/audiodevice to these jacks. Buttons and interface location Rear Control panel Earphone jack: Earphone audio output terminal. PC VIDEO Inpu[...]

Remote control Precautions 3 .Replace the cover of the battery compartment. Make sure that there is no obstacle between the remote controller and television set. As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or of f as you expect. Keep the remote controller awa[...]

STILL SLEEP PIP TV/A V P .STD S.STD H.LOCK CH.LIST EXIT SCAN SWAP TIMER ZOOM ABC@ DEF JKL% GHI$ MNO STUV POR& WXYZ *#() MUTE DISPLA Y CH+ CH- VOL- VOL+ MENU Keys of remote control STILL Picture static I/II (NICAM) MUTE Switches the sound on or of f Power Off/Standby any other programmed equipment off. SCAN Program scan button DISPLAY Display ON[...]

Ensure the remote control is pointed toward the remote control window on the display . No obstacles should be placed between the remote control and the remote control window . The effective receiving scope for the signal is 8 meters to the front of the OO remote control window, and 45 to the left or right side and 20 above or below the control wind[...]

Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. Mixer additional purchase Note * It is recommended that you'd better use 75 * Don't bind antenna cable and electric wire together . coaxial cable to remov[...]

ANT IN SCART2 SCART1 HD-AUDIO HD-AUDIO PC/DVI AUDIO IN External Equipment Connection - T o avoid picture noise (interference), leave an adequate distance between the VCR And TV. VCR connection NOTE: All cables shown are not included with the TV . 1. Connect the SCAR T cables from the VCR's output jacks to the TV`s input jacks, as shown in the [...]

HDMI/DVI OUTPUT HDMI/DVI IN1 PC IN Pr/Cr Pb/Cb Y IN2 HDMI/DVI IN2 Pr/Cr Pb/Cb Y IN1 HD-AUDIO HD-AUDIO PC/DVI AUDIO IN ANT IN Pr/Cr Pb/Cb Y IN2 SCART2 SCART1 Pr/Cr Pb/Cb Y IN1 HD-AUDIO HD-AUDIO PC/DVI AUDIO IN RGB-DTV OUTPUT R AUDEO L YP bP r R AUDEO How to connect 1 . Connect the DVD video outputs (Y , Pb/Cb, Pr/Cr) to the HDTV IN jacks on the TV a[...]

ANT IN HDMI/DVI IN1 PC IN Pr/Cr Pb/Cb Y IN2 SCART2 SCART1 HDMI/DVI IN2 AC IN Pr/Cr Pb/Cb Y IN1 HD-AUDIO HD-AUDIO PC/DVI AUDIO IN How to connect 1 . T o get the best picture quality , adjust the PC graphics card to ( 1024x768),60Hz. 2 . Use the TV`s PC IN port for video connections, depending on your PC connector. 3 . Then, make the corresponding au[...]

Power source TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. NOTES: Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only. If the polarized AC cord does not fit into a non- polarized AC outlet, do not [...]

Switching ON/OFF the TV set 1 first, connect power cord correctly and the power indicator will light . 2 If the indicator is lighting in red, press the digit buttons or CH+/- button on the remote controller again or POWER or CH+/- button on the TV set.(with the exception 0 digit) 3 If you want to exchange to standing by status, please press down bu[...]

This TV set has three methods to set channels, which are respectively full a utomatic, manual s earch fine tune. In this section, h ow to use the remote control to set channel i s explained. Y ou can also use buttons on the TV set to set channel. Automatic search Note : The TUNING menu will be only operated in normal TV, AV and SCART mode. Auto Sea[...]

Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. Tuning menu AUDIO ADJUST FUNCTION TIMER MENU PICTURE TUNING Program Number Edit Name Color System Sound System Manual Search AFT Skip OFF 18 C 28 AUTO D/K 62.25MHz AUDIO ADJUST FUNCTION TIMER MENU PICTURE TUNING Tuning [...]

Tuning menu Program T able Program T able Red: Del; Green: Copy; Yellow: Name; Blue: Swap 001 002 003 004 005 006 007 008 009 010 Delete name Copy edit name Name channel 1 Press CH+/- to select the channel, 2 Press the green button on the remote control, 3 Press CH+/- button to select the channel to copy, 4 Press MENU button to ensure. Swap channel[...]

If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. Press CH+/- button to select "Sound System", then press VOL-/+ button to select the correct sound system. Press VOL+/- button to select D[...]

After the pro grams are presetting, you can skip some programs so that to select your favorite channels only . If you want to recover the skipped channel 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. 2. Do the above steps again. 3. Press VOL+/- button to set Skip as Off . Skip Tuning menu Program swap 1 Su[...]

You can watch TV program in a presetting channel. How to select the desired program 1 Using "Program number" buttons . Press digit button to select the program. If 2-digit or 3-digit programs are selected , press digit buttons you needed continuously with in3 seconds 2 Using CH+/- button. Press CH+ button to select a channel number in num[...]

Personal: Soft: Bright: A spare setting that can be adjusted to personal status Designed for rooms that have good all round lighting Designed for night time low light viewing Designed for rooms with high ambient lighting such as daytime sport; Normal: AUDIO ADJUST TUNING FUNCTION TIMER MENU PICTURE Video Mode Personal Contrast Brightness Saturation[...]

MENU AUDIO ADJUST TUNING FUNCTION TIMER PICTURE Vo lume Balance Audio Mode Treble Bass Auto Vo lume Woofer Music 0 0 0 0 1 Press MENU button and then use CH+/- button to select the AUDIO menu. 2 Press VOL+/- button and then use CH+/- button to select . 3 Press VOL+/- button to . 4 the item to adjusted obtain the desired effect When you are satisfie[...]

When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. Eliminate sound 1 Press the MUTE button on the remote control and "Mute" type face will display on the lower part of the screen. At this time, the sound o[...]

Time Setting AUDIO ADJUST TUNING FUNCTION TIMER MENU PICTURE Clock Off Time On Time On Prog. Remind Time Remind Prog. The clock will only work if the TV set is turned on or in standby . When the set is disconnect from the power supply or is turned off by the main power, the clock loses power and will need to be reset when the power is reconnected. [...]

It is possible to select language, OSD transparent, Menu T imer and Calendar of the menu as follows: Function menu Function setup MENU FUNCTION AUDIO ADJUST TUNING TIMER PICTURE West Europe Language Menu Timeout Menu Backgroud Blue Screen Calendar Teletext Language Restore Default Value English 15 seconds Transparent OFF 1 Press MENU button and the[...]

Adjust menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. AUDIO ADJUST TUNING FUNCTION TIMER MENU PICTURE Display Mode Adjust RGB Default Auto Sync Color Temperature Black Stretch OFF 4:3 9300K It does not work on the TV mode. 1 Press MENU button and[...]

AUDIO ADJUST TUNING FUNCTION TIMER MENU PICTURE Display Mode Adjust RGB Default Auto Sync Color Temperature Black Stretch OFF 4:3 9300K In PC input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture as follows: H Size Horizontal size of picture can be adjusted in this item. H Position: H[...]

Password OFF Tuner Lock Prog.Set Prog. Num Source Lock Child Lock Max Volume Clear Lock LOCK SET OFF 1 OFF 100 The password can be changed. After entering the Lock set menu, Press CH+/- to select password , Press VOL+/-, the screen will display the follow. If correct password is entered, the screen will display the follow. Press digital button to s[...]

Prog Num Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL+/- button, to select channel number.(The item is not available except TV signal.) Source Lock Source Lock is opted to hinder external input modes, such as AV , Scart and PC. Press CH+/- button to select the option, and press VOL+/- button to d[...]

Other functions Display function NICAM If the broadcaster is transmitting Bilingual sound service. The button on the remote controller will allow up to 2 separate languages to be selected. You can press the button to make a choice. / / If current program number, color system and sound system are to be displayed on the screen, press DISPLAY button, [...]

Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc.). You can press button into TEXT mode, press[...]

(MIX) While in T eletext mode press the button will show the teletext data superimposed on top of the TV picture. Press the button again to revert back to Full text. (HOLD) Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number . (Fas[...]

To remove dirt or dust, wipe the cabinet with a soft, dry , lint-free cloth. Please be sure not to use a wet cloth. Maintenance Cleaning the Screen - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any [...]

Specifications and functions Model Size (Wx x ) unit: mm main component DH Net Weight(Kg) 1366X768(Dot) ~150-240V , 50/60Hz External Antenna Impedance 75 ohm PAL, SECAM, NTSC L26V6-A8(K) Storage T emperature Storage Humidity -15 45 5% 90%, non-condensing L32V6-A8(K) L37V6-A8(K) 1366X768(Dot) 1366X768(Dot) 53 5 20% 80% 1096 278 655 25kg 940 240 584 [...]

Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. Note : Production of the screen requires high and precision technologies. However, there might be some dark or bright [...]

0090508958 01[...]