Harman Kardon BDS775 Bedienungsanleitung

Blu-ray Disc ™ receive r BDS 275/BDS 575/ BDS 277/BDS 577 Owner’s Manual[...]

2 BDS BD/DVD Region Codes and T able of Contents INTRODUCTION 3 VERIFY LINE VOL T AGE BEFORE USING 3 UNP ACKING 3 INST ALLA TION LOCA TION 3 CLEANING 3 MOVING THE RECEIVER 3 SUPPLIED ACCESSORIES 3 RECEIVER FRONT -P ANEL CONTROLS 4 RECEIVER REAR-P ANEL CONNECTIONS 6 REMOTE CONTROL FUNCTIONS 8 CONNECTIONS 10 PREP ARING THE REMOTE CONTROL 13 SETTING U[...]

3 BDS Introduction, Verify Line V oltage Bef ore Using, Unpacking, Installation Location, Cleaning, Moving the Receiver , and Supplied Accessories Introduction Please register your product on our Web site at www .harmankardon.com. Note: Y ou’ll need the product’ s serial number . At the same time, you can choose to be notified about our new pr[...]

4 BDS Receiver Front-Panel Controls Receiver Front-P anel Controls Eject Button On/Standby Indicator Volume Control/ Power Button USB Port Headphone Connector Information Display Disc Slot[...]

5 BDS Receiver Front-Panel Controls Eject button (appears only when a disc has been inserted): T ouch this button to eject a disc from the BDS receiver’s built-in disc player. Before touching this button, make sure no objects are blocking the disc-slot opening. NOTE: If you do not remove the ejected disc within 90 seconds, it will automatically r[...]

6 BDS Receiver Rear -Panel Connections Receiver Rear -Panel Connections Main Power Switch AC Power Connector Component Video Input Connector HDMI Input Connectors Network Connector HDMI Monitor Out Connector Optical Digital Input Connectors Fan Vents Speaker Connectors Remote IR Input Connector Subwoofer Output Connector FM Antenna Connector Subwoo[...]

7 BDS Receiver Rear -Panel Connections NOTE: See the Connections section, on page 10 , for detailed information about making connections. Main Power switch: This mechanical switch turns the BDS receiver’s power supply on or off. After you have made and verified all connections (see the Connections section, on page 10 ), set this switch to the ?[...]

8 BDS Remote Control Functions Remote Control Functions Power Button Eject Button Source Buttons Display Button Back Button Cursor Buttons Options Button Thumbnail (Y ellow) Button Zoom (Blue) Button Repeat Button Volume +/– Buttons Surround Button T ransport Control Buttons TV Power Button Mute Button T op Menu Button Replay Button Home Button O[...]

9 BDS Remote Control Functions Power button: Pressing this button toggles the BDS receiver between the On and Standby modes. NOTE: If the receiver goes for 30 minutes without receiving an audio signal or a user command, it will automatically enter the standby mode to conserve electrical power . TV Power button: After you program the remote control,[...]

10 BDS Connections Connections CAUTION: Before making any connections to the BDS receiver , ensure that the receiver’ s AC cord is unplugged from the receiver and the AC outlet. Making speaker connections with the receiver plugged in and turned on could damage the speakers. Y our BDS receiver has color -coded speaker terminals: BDS 275/BDS 277 wh[...]

11 BDS Connections Connecting a TV or Video Display Use the supplied HDMI cable to connect the BDS receiver’ s HDMI output to your TV/video display’ s HDMI input. The BDS receiver is HDMI with 3D and 30/36-bit Deep Color . NOTE: If you have devices (such as an Internet modem) already connected directly to your TV , you can feed their sound to t[...]

12 BDS Connections Connecting Y our Coaxial Digital Audio Source Device If one of your non-HDMI source devices has a coaxial digital output, connect it to the receiver’ s Coaxial Digital Input connector . NOTE: Make only one type of digital connection (HDMI, optical or coaxial) from each device. T o Coaxial Digital Audio Output Coaxial Digital Au[...]

13 BDS Connections and Preparing the Remote Control Connect the Remote IR Input The BDS receiver is equipped with a Remote IR Input connector that lets you remotely control the receiver when you place it inside a cabinet or in a location that is out of the line of sight of the remote control. Connect an external IR receiver , such as the optional H[...]

14 BDS Preparing the Remote Control 4 . Aim the remote towards the component you just turned on and enter a set-up code number from Step 1, above. Use the Program (Red) button for the first digit; the Bookmark (Green) button for the second digital; the Thumbnail (Y ellow) button for the third digit; and the Zoom (Blue) button for the last digit. I[...]

15 BDS Preparing the Remote Control and Setting Up the Receiver 1 . Press and hold the source button for the main device the remote will be operating. The button will light up, go dark and then light up again. Release the button. 2 . Select the type of punch-through programming. a) For “punch-through” channel control, press the Channel + button[...]

16 BDS Setting Up the Receiver Press the OK button and the TV-resolution screen will appear . Initial Setup Please select the highest resolution that your TV supports. If you are unsure select ‘Auto’. Auto 1080p 1080i 720p 480p/576p Page 3/6 Next Previous OK After selecting your TV’s highest resolution, press the OK button, and the TV aspect-[...]

17 BDS Setting Up the Receiver BD-Live Storage: When you select the BD-Live features from a disc’ s menu, you may be able to download additional content or other information via the Internet (through the BDS receiver’ s Network connection) and onto a memor y device inserted into the receiver’ s USB port. This option lets you see how much spac[...]

18 BDS Setting Up the Receiver Video Processing: This option allows you to set the BDS receiver’ s internal video processing. Video Mode: This setting lets you select a preset video-processing option to optimize the picture for the current program by adjusting the brightness, contrast, color and sharpness: • Standard: Neutral control settings. [...]

19 BDS Setting Up the Receiver 6 . Remain silent while the test noise plays through the speakers. As the test noise circulates among the speakers the screen will show which speaker is being tested. EzSet/EQ automatic setup can calibrate the BDS system and configure loudspeaker parameters automatically to get the best sound performance. EzSet/E Q (A[...]

20 BDS Using the Receiver Using the Receiver NOTE: Before using your new BDS receiver , be sure to set the speaker distances, as explained in Audio Settings: Speaker Settings , on page 18. Home Menu Press the Home button to display the Home Menu screen: Home Menu DLNA Bluetooth Y ouT ube Pandora Picasa FM Radio Ty pe: DLNA 01 / 10 The available sou[...]

21 BDS Using the Receiver 7 . Press the Back button twice to return to the speaker setup screen (the front left and front right speakers will still be highlighted). T o adjust the volume of a different speaker , use the cursor buttons to highlight it and press the OK button. Repeat Steps 5 – 6 for that speaker . 8 . When you are finished adjusti[...]

22 BDS Using the Disc Player Using the Disc Player Disc Handling Precautions • T o keep the disc clean, handle the disc by its edge. Do not touch the surface. • Do not stick paper or tape on the disc. If there is glue (or a similar substance) on the disc, remove the substance completely before using the disc. • Do not expose the disc to direc[...]

23 BDS Using the Disc Player and Playing Streaming Media via Y our Home Network Display button: When playing Blu-ray Disc recordings and DVDs, pressing the Display button toggles the information bar on and off. English Dolby Digital 5.1 MPEG 1 / 1 00 : 32 : 37 1/1 DVD-VIDEO 1 / 8 T T C Playback Mode Disc T ype & Encoding Audio Mode “Find” I[...]

24 BDS Streaming Media via Y our Home Network, Listening to Y our iPod/iPhone/iPad and Listening to FM Radio, Before you can access files located on other devices via DLNA, each device must first give permission to share files with the BDS receiver . T o give file sharing permission on a PC with Windows Media Player: 1 . Open Windows Media Play[...]

25 BDS Listening to Audio Sources, Listening to Media via AirPlay and Playing Files from USB Devices and Data Discs Listening to Audio Sources Press the Aux button on the remote control. The receiver will switch to the audio input that was selected last. Subsequent presses of the Aux button will advance through the audio inputs in the following ord[...]

26 BDS Playing Files from USB Devices and Data Discs The screen will then show the device’ s file structure. Selecting a folder will show all files of the selected type of media in the folder . If there are files of the selected type in the device’ s root directory , they will also be shown. T o move up one directory level, press the Cursor [...]

27 BDS Playing Files from USB Devices and Data Discs and Using Playlists If a selected MP3 file has an album cover -art ID3 tag, the art will be displayed on the screen. Use the remote’ s T ransport Control buttons to control music-file playback. See Remote Control Functions , on page 8, for more information about the functions of these buttons[...]

28 BDS T roubleshooting T roubleshooting If your BDS receiver isn’t performing the way you think it should, check to see if the problem is covered in this section before calling your Harman Kardon dealer . Problem Solution The receiver won’t power up (the On/Standby indicator is not lit): • Check that the receiver’s Power cord is properly p[...]

29 BDS Aux Component Remote-Control Code List Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers A MARK 0132 0122 1088 1105 ACER 0143 1167 ADMIRAL 0192 1105 1088 1023 ADVENT 0151 AIWA 0027 1110 AKAI 0053 1042 1093 1022 1089 1020 1056 1011 1053 AKAL 0160 0123 AKURA 1020 ALBA 1040 1020 AMPRO 0164 ANAM 0122 0112 0109 0106 0045 ANS[...]

30 BDS Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers DIGIFUSION 1184 DIGITREX 1192 DISH NETWORK 0188 2012 DIXI 1022 DORIC 1029 DUMONT 1201 1199 1096 1088 1023 DUMONT -FINLUX 1044 1012 DYNASTY 0045 DYNA TECH 0063 DYNA TRON 1022 1020 DYNEX 0014 0083 0107 0189 ELBE 1211 1105 1095 ELCIT 1032 1023 ELECTROGRAPH 0064 ELECTROHOME [...]

31 BDS TV/DVR Aux Component Remote-Control Code List Manufacturer Code Numbers INTERVISION 1121 1115 1119 1114 1118 1113 1117 1111 1116 ISIS 1186 ITT 1100 1092 1046 1040 ITT -NOKIA 1100 1092 1058 1040 JBL 0148 JCPENNY 0145 0132 0128 0123 0115 JENSEN 0019 JET POINT 1208 JOHN LEWIS 1193 JVC 0134 1053 0087 1047 0079 1043 1092 1010 1056 KARCHER 1068 10[...]

32 BDS Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers NOBLEX 1204 1205 NOKIA 1100 1092 1046 1040 NORDMENDE 1094 1056 1009 1093 1053 1080 1024 1069 1019 1059 1017 OKI 1045 1049 1081 1087 1097 OLEVIA 0007 ONKING 0045 ONWA 0045 OPTOMA 0229 OPTONICA 0077 ORION 0211 0230 1038 0210 1210 0209 1209 0208 1091 0207 1040 OTTO VERSAND [...]

33 BDS Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers SONY 0212 0031 1103 1062 1006 0194 0028 1102 1043 1172 0136 0060 1091 1038 1173 0130 0093 1065 1016 1174 0117 1106 1064 1010 SOUND WA VE 1020 SOUNDESIGN 0128 0045 SPECTRICON 0122 SSS 0045 STERN 1198 1025 1022 SUNKAI 1210 SUPERSCAN 0195 SUPRA TECH 1139 1140 1141 1142 1143[...]

34 BDS Aux Component Remote-Control Code List CABLE BOX Manufacturer Code Numbers ABC 3011 3001 ALLEGRO 3111 AMERICAST 3212 AMINO 3015 4031 ARCHER 3112 BELCOR 3113 BT CABLE 4007 CABLE ST AR 3113 3033 CABLETIME 4016 4012 4011 4008 CISCO 3016 3021 4032 4033 CITIZEN 3111 CL YDE CABLE VISION 4017 COLOUR VOICE 3090 3085 COMCAST 3007 4040 3040 3054 4014 [...]

35 BDS Aux Component Remote-Control Code List CABLE BOX Manufacturer Code Numbers TFC 3122 TIMELESS 3123 TIVO 3029 3030 4029 4030 TOCOM 3205 3170 TUDI 4027 UNITED CABLE 3011 4001 UNIVERSAL 3113 3042 3039 3034 3033 VIDEOWA Y 3211 3124 VIEWST AR 3190 3019 3089 3086 3053 3025 VISIOP ASS 4009 WESTMINSTER CABLE 4007 ZENITH 3219 3211 3125 3065 ZENTEK 311[...]

36 BDS Aux Component Remote-Control Code List SA TELLITE TUNERS Manufacturer Code Numbers MEMOREX 5153 METZ 6090 MINERV A 6090 MITSUBISHI 5007 6090 MOTOROLA 5012 5019 MUL TIST AR 6080 NEC 6073 6046 6036 6030 NET A P562 6140 NEXTWA VE 5123 NOKIA 6067 NORSA T 5073 6046 OPTIMUS 5166 OTTO VERSAND 6090 P ACE 5187 6067 6017 5028 6064 6039 5043 6063 5082 [...]

37 BDS Specifications BDS 577, BDS 575, BDS 277 and BDS 275 Receivers Audio Section Continuous average power , stereo model: 65 watts per channel, 20Hz – 20kHz, @ <1.0% THD, both channels driven into 6 ohms Multichannel power (BDS 575/BDS 577 only): 65 watts per channel, 20Hz – 20kHz, @ <1.0% THD, into 6 ohms Input sensitivity/impedance ([...]

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only) Made in P.R.C. © 2012 HARMAN International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. EzSet/[...]

NETGEAR genie Advanced Home 39 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Y ou can specify the pool of IP address that the router assigns by setting the starting IP address and ending IP address. These addresses should be part of the same IP address subnet as the router’s LAN IP address. Using the default addressing scheme, you should defi[...]

[...]

NETGEAR genie Advanced Home 41 N900 Wireless Dual Band Gigabit Router WNDR4500v2 QoS for Applications and Online Gaming  T o create a QoS policy for applications and online games: 1. In the QoS Setup screen, select the T urn Internet Access QoS On check box. 2. Click the Setup QoS Rule button to see the existing priority rules. On this screen, y[...]

[...]

NETGEAR genie Advanced Home 43 N900 Wireless Dual Band Gigabit Router WNDR4500v2 5. From the Priority Category list, select Ethernet LAN Port , as shown in the following figure: 6. From the LAN port list, select the LAN port. 7. From the Priority list, select the priority that this port’ s traffic should receive relative to other applications and[...]

NETGEAR genie Advanced Home 44 N900 Wireless Dual Band Gigabit Router WNDR4500v2 3. From the Priority Category list, select MAC Address to display the following screen: 4. If the device to be prioritized appears in the MAC Device List, select its radio button. The information from the MAC Device List populates the policy name, MAC Address, and Devi[...]

[...]

USB Storage 46 N900 Wireless Dual Band Gigabit Router WNDR4500v2 USB Drive Requirements The router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) standards. The approximate USB bus speeds are shown in the following table. Actual bus speeds can vary , depending on the CPU speed, memory , speed of the network, and other variables. T[...]

[...]

USB Storage 48 N900 Wireless Dual Band Gigabit Router WNDR4500v2 • The photo-capable color printer is directly attached to a PC, but not shared on the network. • The Mac and PC are not visible to each other on the network.  T o print photos from a Mac on the printer attached to a PC: 1. On the Mac, access the USB drive by typing readyshare[...]

[...]

[...]

USB Storage 51 N900 Wireless Dual Band Gigabit Router WNDR4500v2 USB Storage Advanced Settings Y ou can set up the device name, workgroups, and network folders for your USB device. On the Advanced tab, select USB Storage > Advanced Settings to display the following screen: Y ou can use this screen to specify access to the USB storage device. •[...]

USB Storage 52 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Available Network Folders Y ou might need to scroll down to view this section of the screen: • Share Name . If only 1 device is connected, the default share name is USB_Storage. Y ou can click the name shown, or you can type it in the address field of your web Browser . If Not Share[...]

USB Storage 53 N900 Wireless Dual Band Gigabit Router WNDR4500v2 T o view these settings, select Advanced > USB Storage > Media Server . By default the Enable Media Server check box and the Automatic (when new files are added) radio button are selected. When these options are selected, the router scans for media files whenever new files are a[...]

USB Storage 54 N900 Wireless Dual Band Gigabit Router WNDR4500v2 2. Click the Approved Devices button. This screen shows the approved USB devices and the available USB devices. Y ou can remove or add approved USB devices. 3. T o add an approved USB device, select it from the Available USB Devices list and click Add . 4. Select the Allow only approv[...]

USB Storage 55 N900 Wireless Dual Band Gigabit Router WNDR4500v2 2. T ype the account name and password for the account that has access rights to the USB drive. The user name (account name) for All – no password is guest . 3. The directories of the USB drive that your account has access to display , for example, share/partition1/directory1. Y ou [...]

USB Storage 56 N900 Wireless Dual Band Gigabit Router WNDR4500v2 T ime Machine T ime Machine works only on Mac computers. It automatically backs up everything on your computer to a USB hard drive that is connected to the Mac. Set Up T ime Machine If you are already using T ime Machine software with your USB hard drive, you can skip the set up and g[...]

USB Storage 57 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Access the Connected USB Hard Drive After the initial set up explained in the previous section, you can access the connected USB hard drive from your Mac.  T o access the drive with Time Machine: 1. From your Mac, open Macintosh HD. 2. From SHARED, click WNDR4500 . 3. Click the Con[...]

USB Storage 58 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Y ou are prompted to log in. Show Time Machine status in the menu bar Click the lock to prevent further changes. OFF ON Time Machine T ime Machine Show All your music, pictures, and other inportant les. Since Time Machine keeps daily backups, you can r evisit your Mac as it appeare[...]

USB Storage 59 N900 Wireless Dual Band Gigabit Router WNDR4500v2 4. Set Energy Saver . a. From the Apple menu, select System Preferences . b. From the V iew menu, select Energy Saver . c. On the Energy Saver screen, select W ake for Ethernet network access . d. Click the back arrow to exit this screen. Y our changes are saved. 5. Modify your securi[...]

USB Storage 60 N900 Wireless Dual Band Gigabit Router WNDR4500v2 c. On the Security screen, leave the Log out after minutes of inactivity check box cleared (not selected). Change the Partition Scheme T o run with the router , the partition scheme on your Mac has to be set to either GUID or MBR.  T o make sure that the partition scheme is set to [...]

USB Storage 61 N900 Wireless Dual Band Gigabit Router WNDR4500v2 3. Select V olume Scheme and set the number of partitions you would like to use. 4. Click Options , and the Partition options appear . 5. Select GUID Partition T able or Master Boot Record (MBR). 6. Click OK .[...]

[...]

ReadySHARE Printer 63 N900 Wireless Dual Band Gigabit Router WNDR4500v2 ReadySHARE Printer Y ou can connect a USB printer to the router ’s USB port, and share it among Windows and Mac computers on the network.  T o set up ReadySHARE Printer: 1. Connect the USB printer to the router ’s USB port with a USB printer cable. 2. Install the USB pri[...]

[...]

ReadySHARE Printer 65 N900 Wireless Dual Band Gigabit Router WNDR4500v2 6. The first time you access the utility , you are asked to select the printer and click the Connect button. Once the connection is established, the status changes to Manually connected by xxx . Y ou can click the Disconnect button at any time to release the connection. The sta[...]

[...]

ReadySHARE Printer 67 N900 Wireless Dual Band Gigabit Router WNDR4500v2 USB Control Center Utility The USB Control Center utility allows you to control a shared USB device from a computer that is connected to the USB port on your router . The utility allows you to control a printer , a scanner , or an audio speaker . The utility has to be installed[...]

ReadySHARE Printer 68 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Control Center Configuration Select T ools > Configuration to display the following screen: Automatically execute when logging on Windows . Enable this utility to start automatically when you are logged in to Windows. Timeout . Specify the time-out value for holding the USB [...]

ReadySHARE Printer 69 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Once the printer shows Available status, it is no longer grayed out in a Paused state in the Windows Printers and Faxes window . This USB printer is ready . The utility does not need to always hold the connection of this USB printer . Once there is any print job for this printe[...]

[...]

[...]

Security 72 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Block Services (Port Filtering) Services are functions performed by server computers at the request of client computers. For example, web servers serve web pages, time servers serve time and date information, and game hosts serve data about other players’ moves. When a computer on the [...]

[...]

Security 74 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Schedule Blocking Y ou can specify the days and time that you want to block Internet access.  T o schedule blocking: 1. Select Advanced > Security > Schedule to display the following screen: 2. Set up the schedule for blocking keywords and services. • Days to Block . Select da[...]

Security 75 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Security Event Email Notifications T o receive logs and alerts by email, provide your email information in the E-mail screen, and specify which alerts you want to receive and how often.  T o set up email notifications: 1. Select Advanced > Security > E-mail to display the follow[...]

76 8 8. Administration Managing your network This chapter describes the router settings for administering and maintaining your router and home network. This chapter includes the following sections: • Upgrade the Router Firmware • View Router Status • View Logs of W eb Access or Attempted Web Access • Manage the Configuration File • Set Pa[...]

[...]

Administration 78 N900 Wireless Dual Band Gigabit Router WNDR4500v2 V iew Router Status T o view router status and usage information, select Advanced Home or select Administration > Router Status to display the following screen: Router Information Hardware V ersion. The router model. Firmware V ersion . The version of the router firmware. It cha[...]

Administration 79 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Connection . This shows if the router is using a fixed IP address on the W AN. If the value is DHCP Client, the router obtains an IP address dynamically from the ISP . IP Subnet Mask . The IP subnet mask that the Internet (W AN) port of the router uses. Domain Name Server . The Dom[...]

Administration 80 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Connection Status Button On the Router Status screen in the Internet Port pane, click the Connection Status button to view connection status information. Figure 7. View connection status information The Release button returns the status of all items to 0. The Renew button refreshes[...]

[...]

Administration 82 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Guest Network (2.4 GHz and 5 GHz) Name (SSID ). The 1 1N wireless network name (SSID) used by the router. The default names are NETGEAR-Guest and NETGEAR-5G-Guest. Wireless AP . Indicates whether the radio feature of the router is enabled. If this feature is not enabled, the Wirele[...]

[...]

Administration 84 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Manage the Configuration File The configuration settings of the router are stored within the router in a configuration file. Y ou can back up (save) this file to your computer , restore it, or reset it to the factory default settings. Back Up Settings  T o back up the router’s[...]

Administration 85 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Erase Under some circumstances (for example, if you move the router to a different network or if you have forgotten the password), you might want to erase the configuration and restore the factory default settings. Y ou can use either use the Reset button on the back of the router [...]

Administration 86 N900 Wireless Dual Band Gigabit Router WNDR4500v2 forgotten. This recovery process is supported in Internet Explorer , Firefox, and Chrome browsers, but not in the Safari browser .  T o set up password recovery: 1. Select the Enable Password Recovery check box. 2. Select two security questions, and provide answers to them. 3. C[...]

[...]

[...]

Advanced Settings 89 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Wireless Repeating Function Y ou can set the router up to be used as a wireless access point (AP). Doing this enables the router to act as a wireless repeater . A wireless repeater connects to another wireless router as a client where the network to which it connects becomes the[...]

Advanced Settings 90 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Wireless Repeater . The router sends all traffic from its local wireless or wired computers to a remote access point. T o configure this mode, you have to know the MAC address of the remote parent access point. The router is always in dual band concurrent mode, unless you turn o[...]

Advanced Settings 91 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Repeater IP Address . If your router is the repeater , enter the IP address of the other access point. Disable Wireless Client Association . If your router is the repeater , selecting this check box means that wireless clients cannot associate with it. Only LAN client associatio[...]

[...]

Advanced Settings 93 N900 Wireless Dual Band Gigabit Router WNDR4500v2 3. Fill in the Repeater IP Address field. This IP address has to be in the same subnet as the base station, but different from the LAN IP address of the base station. 4. Click Apply to save your changes. 5. V erify connectivity across the LANs. A computer on that joins the netwo[...]

[...]

Advanced Settings 95 N900 Wireless Dual Band Gigabit Router WNDR4500v2 An example is Internet Relay Chat (IRC). Y our computer connects to an IRC server at destination port 6667. The IRC server not only responds to your originating source port, but also sends an “identify” message to your computer on port 1 13. Using port triggering, you can te[...]

Advanced Settings 96 N900 Wireless Dual Band Gigabit Router WNDR4500v2 ignores any inbound traffic that is not a response to your own outbound traf fic. Y ou can configure exceptions to this default rule by using the port forwarding feature. A typical application of port forwarding can be shown by reversing the client-server relationship from the p[...]

Advanced Settings 97 N900 Wireless Dual Band Gigabit Router WNDR4500v2 • Port triggering does not require that you know the computer ’s IP address in advance. The IP address is captured automatically . • Port forwarding requires that you specify the computer ’s IP address during configuration, and the IP address can never change. • Port t[...]

Advanced Settings 98 N900 Wireless Dual Band Gigabit Router WNDR4500v2 Port Forwarding is selected as the service type. 2. From the Service Name list, select the service or game that you will host on your network. If the service does not appear in the list, see Add a Custom Service on page 98 . 3. In the corresponding Server IP Address field, enter[...]

Advanced Settings 99 N900 Wireless Dual Band Gigabit Router WNDR4500v2 7. In the Internal IP Address field, enter the IP address of your local computer that will provide this service. 8. Click Apply . The service appears in the list in the Port Forwarding/Port T riggering screen. Edit or Delete a Port Forwarding Entry  T o edit or delete a port [...]