Hayter Mowers 005E Bedienungsanleitung

OWNER'S HANDBOOK Hayterette CODE 005E (English V ersion) CODE FROM SERIAL NO: P ART NUMBER: 1 1 1-1292 (A) 005E 270000001 ISSUE 13.04.07 111-1292 A 30/4/07 8:45 am Page 1.1[...]

Main Features Specifications 1.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1C005A01A 1. Decal - Height of Cut 2. Decal - Caution 3. Serial Number Label 4. Exhaust Guard 5. Spark Plug Lead 6. Air Cleaner 7. Fuel Filler 8. Finger Guard 9. Oil Filler Cap & Dipstick 10. Handlebar Securing Knobs 1 1. Engine Start Grip 12. Throttle Control 13. Engine Stop [...]

1ST Y ear (12 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 1ST Y ear (12 months) Owner’s Name: Serial Number: Date: 2nd Y ear (24 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: Owner’s Name: Serial Number: Date: Note for dealer : [...]

111-1292 A 20/4/07 1:51 pm Page 1.4[...]

CONTENTS 1.5 1.2 Main Features/Specifications 1.5 Contents 1.6 Introduction 1.7 W arranty 1.8 - 1.1 1 Safety Precautions 1.8 Safety Alert Symbol 1.8 T raining 1.8 - 1.9 Pr eparation 1.9 - 1.10 Operation 1.10 - 1.1 1 Maintenance & Storage 1.1 1 Safety Symbols 1.1 1 Decal Symbols 1.12 Assembling the Mower 1.12 - Delivery Checklist 1.12 - Handleba[...]

Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your machine. IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications. Read and understand this hand[...]

LIMITED W ARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warra[...]

SAFETY PRECAUTIONS This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used corr ectly . Failure to observe the following precautions may r esult in serious injury . Before using the mower read[...]

- Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . - Replace faulty silencer . A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be re[...]

Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear flap while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: -[...]

SAFETY PRECAUTIONS 1.11 Allow the engine to cool before storing in any enclosure. T o reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the flap frequently for wear or deterioration. Replace worn or damaged parts for safety . If the fuel tank has to be drained, this should be don[...]

ASSEMBLING THE MOWER 1.12 Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Engine Handbook. Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Move the engine stop lever away from the engine to avoid[...]

BEFORE ST AR TING THE MOWER 1.13 T o prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified “For service SE, SF , SG” SAE 30 oil. Never use additives with recommended oils. SAE 10W -30 mult[...]

1.14 Operate all control levers several times and ensure that the cables move freely . Check that the engine stop lever returns freely to it’s rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘ choke ’ position. Move the throttle control lever to the ‘ [...]

1.15 Forward travel: Hold and push against the handlebar with both hands to move the mower forwards. Reverse travel: Hold and pull against the handlebar with both hands to reverse the mower towards you. T o make a wide turn steer the mower with the handlebar in the direc- tion required. T o make a tight turn apply downward pressure on the handlebar[...]

1.16 OPERA TING THE MOWER Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings. Always select a height of cut to suit operating conditions.[...]

1.17 OPERA TING Always select the maximum height of cut setting to prevent the engine overloading. Be prepared to make two cuts when the grass is long. T o prevent damage to your lawn do not remove more than one third of grass height in one cut. Hayter balanced ‘C’ type cranked cutterblades are fitted to this machine. They are designed to swing[...]

LA WN CARE CALENDAR 1.18 There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary . The yearly lawn work programme really starts this month. As soon as the[...]

CALENDAR LA WN CARE 1.19 Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow . Rake out t[...]

MAINTENANCE SCHEDULE 1.20 25Hrs or Every Season Daily First 5Hrs 50Hrs or Every Season T o prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolo[...]

2 1 1 2 3 B R IGGS & S TR AT T ON H A R R IE R 41 6 5 4 MOWER MAINTENANCE Clean the engine cooling system. Clean more often under dusty conditions or when airborne debris is present or after prolonged operation whilst cutting tall, dry grass. Replace the spark plug. 1. Air Filter 2. Fuel Cap 3. Start Grip 4. Oil Cap/ Dipstick 5. Exhaust Guard 6[...]

MOWER MAINTENANCE Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by runn[...]

Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer . Check the spark plug gap with a feeler gauge and set at 0.76mm. Remove all grass and[...]

MOWER MAINTENANCE 1.24 Remove grass debris from the top and underside of the deck housing immediately after use. T o prevent accidents fertilisers and top dr essings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treated grass and stor e well away from corrosive materials. Regularly check that all securing nuts[...]

MOWER MAINTENANCE W ARNING - PREVENT ACCIDENTS: Never work on the cut- terblades unless the spark plug lead has been removed. The cut- terblades have sharp edges. AL W A YS wear str ong gloves to pro- tect your hands when working on the cutterblades. DO NOT rotate tools towards the cutting edges to avoid the risk of injury should the tool slip. AL [...]

MOWER MAINTENANCE 1.26 T o store the handlebar unscrew the 2 small securing knobs sufficient- ly to allow it to be pivoted forwards to rest against the mower . T ake care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being dam- aged through contact with the engine spark pl[...]

PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Engine stop lever released Operate the engine stop lever Incorrect oil level Check oil level Obstruction under deck Remove obstruction Engine smokes Excess oil level Check oil level Air cleaner plugged Service air cleaner Engine runs then stops Fuel starvation Fill fuel tank Fuel cap vent bl[...]

PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose T ighten bolts Cutterblade bolt loose T ighten bolt Cutterblades out of balance Replace cutterblades Engine crankshaft bent Consult your dealer Uneven cut Undulating ground conditions Change direction of travel Cutterblades worn Renew cutterblades Cutterblades out of b[...]

EC DECLARATION OF CONFORMITY Ma nufac ture r: HAYTER LIMI TED, Address: Spell brook, Bis hop’s St ortfor d, Herts. CM23 4B U. ENGLAND declare that the lawnmower : Model name: Type: Mode l No : Cutti ng width: Speed of rotati on of the cutting device: Engine Manufa cturer: Speed of rotati on of engi n e: Hayter ette Push Pedest rian rotary CODE 00[...]

Item No. Description Part No. Qty Item Note 1 Pin - Pivot 340182 2 2 Washer - 19mm Nylon 09688 6 3 Lever - Engine 111-0102 1 4 Screw - 6mm x 20 09687 2 5 Bottom Plate HY2811 1 6 Handlebar - Upper 305145W 1 7 Guide - Rope 305093 1 8 Throttle Control & Cable 111-1113 1 9 Screw - M6 x 55mm Taptite 09780 1 10 Cable - Engine Brake HY412007 1 11 Tie [...]

Item No. Description Part No. Qty Item Note 41 Handle Grip - Black HY4097 1 42 Rivet 09320 1 43 Hub Cap 219143 4 44 Plug - Tube 7/8” 300160 2 45 Washer - 3/8” Spring S/C 09273 1 46 Screw - 3/8” UNF x 1” Long 09114 1 47 Nut - 3/8” UNF Nyloc 09216 2 48 Key - Woodruff 1662 1 49 Decal - Hayter 410087 1 50 Decal - Height of Cut 320006 1 51 Dec[...]

30 33 23 26 24 40 25 54 33 31 41 29 29 29 47 21 32 50 49 51 30 31 52 26 28 28 39 21 32 23 24 42 53 53 47 39 5 58 58 57 57 57 57 56 56 56 56 55 55 55 55 46 45 56 43 43 29 37 30 29 31 35 36 38 57 21 29 43 34 30 35 36 31 29 29 21 32 57 43 32 18 18 27 22 12 16 16 12 14 15 17 17 17 17 16 16 16 17 44 44 16 17 48 1C005D02A 1 6 2 3 11 7 13 20 13 59 10 4 19[...]

1.33 NOTES Notes:- 111-1292 A 20/4/07 1:51 pm Page 1.33[...]

1.34 Notes:- NOTES 111-1292 A 20/4/07 1:51 pm Page 1.34[...]

1.35 NOTES Notes:- 111-1292 A 20/4/07 1:51 pm Page 1.35[...]

1.36 CUST OMER INFORMA TION Serial No: Engine T ype:- 12F802-788B Engine:- Briggs & Stratton Quantum XTS 50 Date of Sale:- Y our Local Dealer:- 111-1292 A 20/4/07 1:51 pm Page 1.36[...]