HP (Hewlett-Packard) 2310TI Bedienungsanleitung

HP 2310t and 2310ti LCD Touch Monitors User Guide[...]

© 2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademar ks of Microsoft Corporation in the U nited States and/or other countries. The only warrantie s for HP products and services are set forth in the express warranty statements accompanying such products and services . No[...]

About This Guide This guide provides information on set ting up the monitor, installing driv ers, using the on-scree n display menu, troublesho oting and technical specification s. WARNING! Text set off in this manner indi cates that failure to follow di rections could result in bodily harm or l oss of li fe. CAUTION: Text set off in this manner in[...]

iv About Thi s Guide ENWW[...]

Table of contents 1 Produc t Feat ures .......... ............ ......... ........... ............ ............ ............. ............ ........... ..... ......... .......... ........... ... 1 HP 2310t and 2310ti Models ........... ........... .......... .......... .......... .......... .......... .......... ........... ....... .......... .. 1 2 [...]

Using the Touch Screen .......... ............. ......... ............. ............ ............ ............ ............. .......... ............. 17 Using the Auto-Adjustment Funct ion .. .. ............ ............ .......... ............ ............ ............ ............ ...... ...... 19 Front Panel Contr ols ..... ............. .......[...]

Disposal of Waste Equ ipment by Users in Private Househo ld in the European Unio n . . . . . 40 HP Recy cling Pro gram ... .................. .................. ................. .................. ................ ............ 40 Chemic al Substanc es .......... ........... ........... .......... ........... ........ ........... .......... .......[...]

viii ENWW[...]

1 Product Features HP 2310t and 2310ti Models The HP LCD touc h screen monitors have a w ide aspect active ma trix thin-film transistor (TF T) panel. The monitors fe ature: ● 58.42 cm (23-inch) diagona l viewable area display with 1 920 x 1080 resolution, plus full-screen support for lower resolutions ● Wide viewing ang le to allow viewing from[...]

2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If an other cord is used, u se only a power source a nd connectio n appropr iate for th is monitor. For inform ation on th e correct po wer cord set to use with the monitor, refer to Power Cord Set Requireme nts on page 39 . WARNING! To reduc[...]

cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for ea ch device. ● Install the monitor n ear an outlet that you can easily reach. Discon nect the monitor by gras ping the plug firmly and pullin g i t from the outlet. Never disconne ct the monitor by pulling the cord. ● Turn the mo[...]

3 Setting Up the Monitor To set up the monitor, en sure that the power is turned off to the monito r, computer system, a nd other attached devices, then follow the instructions below. Rear Components HP 2310t Model Figure 3 -1 2310t Rear Components Table 3-1 2310t R ear Components Component Funct ion 1 Cable Lock Provision Provides slot fo r use wi[...]

HP 2310ti Model Figure 3 -2 2310ti Rear Compon ents Table 3-2 2310ti R ear Compone nts Component Funct ion 1 Cable Lock Provision Provides slot fo r use with cable security locks. 2 AC Power Conn ector Connects the AC power cord to the monitor. 3 Audio Connector Connects the a udio cable to the monitor. 4 DVI-D Connector Connects the DVI-D cable to[...]

Routing the Cables Before connectin g the cables, route them through th e cable routing hole i n the center of the sta nd. Figure 3 -3 Routing Cable s Connecting the Cables CAUTION: Before connecting cables to the monitor, en sure that the computer and the mon itor are powered off. Connecting the VGA (Analog) Vi deo Cable (HP 2310ti Model Only) For[...]

Connecting the DVI-D (Digital) Video Cable For DVI digital op eration, connect one end of the provided DVI-D signal cable to the DVI connector o n the rear of the monitor an d the other end to the DVI connector o n the computer. Figure 3 -5 Connecting the DVI-D Cable Connecting the HDMI (Digital) Vi deo Cable (HP 2310t Model Only) For HDMI digital [...]

Connecting the Audio Cable Connect one end of the provided audio cable to the Audio In connector on the rear of the mon itor and the other end to the Audio Out conne ctor on the co mputer. NOTE: If you connect an HDMI cable (231 0t model only) between the monitor and computer, you do not need to conne ct the audio cable. The HDMI cable sup ports au[...]

Connecting the Power Cord Connect one end of the power cord to the AC power connector on the rear of the mo nitor, and the other end to an ele ctrical wall outlet. Figure 3 -9 Connecting the Powe r Cord WARNING! To reduce the risk of electric shock or da mage to the equipme nt: Do not disable the power cord g rounding plug. T he groundi ng plug is [...]

2. Adjust the tilt by moving the top e dge of the monitor either t oward or away from you, without touching the screen. The monitor will tilt forward 5 degrees and back 55 degrees. Figure 3-10 Adjusting the Tilt 10 Chapter 3 Se tting Up the Monitor ENWW[...]

Keyboard Parking If you need more space on your desktop , place the keyboard u nder the monitor when not in use. Figure 3 -11 Keyboard Parking Turning on the Monitor 1. Press the power but ton on the comput er to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that[...]

Removing the Monitor Pedestal Base You can remove the monitor pane l from the pedestal base to mount the p anel on a wall, a swing arm, or other mounting fixtur e (purchased separately). CAUTION: Before beginning to disassemble the monitor, be sure the m onitor is turned off and the power and signal ca bles are both discon nected. Also disconn ect [...]

4. Remove the two screws that se cure the pedesta l base to the monitor panel. Figure 3-13 Removing the Pedestal Base Screws 5. Tilt the top o f the pedestal base mount back (1) then sli de it up an d lift it off the LCD panel (2 ). Figure 3-14 Removing the Pedestal Base ENWW Removing the Mo nitor Pedestal Base 13[...]

Mounting the Monitor NOTE: This apparatus is intended to b e supporte d b y UL or CSA Listed wall moun t bracket. 1. Remove the monitor p anel from the pedestal ba se. Refer to Removing the Monito r Pedestal Base on page 12 in the previous sectio n. 2. To attach the monitor to a swing arm, insert four 10m m screws through the holes on the swing arm[...]

Locating the Rating Labels The rating labels on the monitor pro vide the spare part number, produ ct number, and serial number . You may need th ese numbers when contac ting HP a bou t the monitor model. The rating l abels are located on the re ar panel of the monitor disp lay head. Figure 3 -16 Locating the Rating Labels Installing a Cable Lock Yo[...]

4 Operating the Monitor Software and Utilities The CD that comes with the monitor co ntains files you can install o n the computer: ● an .INF (Information) file ● an .ICM (Ima ge Color Matc hing) fil e ● Touch driv er (for Window s XP only) ● auto-adjustment pattern utility ● additional software for the monitor model NOTE: If the monitor [...]

Installing the .INF and .ICM Files After you determi ne that you need to update, you ca n instal l the .INF and .ICM files from th e CD or download them. Installing from the CD To install the .INF and .ICM files on the computer from th e CD: 1. Insert the CD in the computer CD-ROM drive. The CD menu is displayed. 2. View the Monitor Driver Software[...]

NOTE: When the touc h function is activ e, make sure there are n o foreign objects blocking the left, right, or bottom edge s of the monitor LCD p anel. The touch function may replace the mouse after you start the Windows operating system and introduce approp riate gesture judgement. Ge sture judgement and relate d Windows software applications ar [...]

Using the Auto-Adjustment Function You can optimize the screen pe rformance for the VGA (an alog) input by using the Auto/OK button on the monitor and the auto-adjustment pattern software utility on the CD provided. Do not use this procedure if the monitor is using a DVI or HDMI input. If the monitor is using a VGA (analog) input, this procedure ca[...]

Front Panel Controls Table 4-2 Monito r Front Panel Control s No. Icon Control Function 1 Menu Opens, selects or exits the OSD menu. 2 Volume/Minus If the OSD menu is inactive, press to open the Volume adjustment OSD sub -menu. If the OSD menu is on, press to navigate down thr ough the OSD menu and decrease adjustment levels. 3 Source/Plus If the O[...]

Adjusting the Monitor Settings The monitor setti ngs can be adjusted from the O n-Screen Display (OSD) menu. NOTE: If there is a problem with the disp lay settings, try resetting the settings to the factory defaults by opening the OSD and selecting Factory Reset from the OSD menu . Using the On-Screen Display Menu Use the On-Screen Display (OSD) to[...]

OSD Menu Selections The following table l ists the On-Screen Display (O SD) menu selections an d their functional descriptions. After changing an OSD menu item, an d if the menu screen has the se options, you m ay choose to: ● Cancel —to retu rn to the prev ious menu level. ● Save and Return —to save all changes and return to the OSD Main M[...]

Table 4-3 OSD Menu (continued) Icon Main Menu Submenu Description Clock M inimizes any vertical ba rs or strips visible on the screen background (VGA input only). Adjusting the Clock will also change the horizontal screen image. Clock Phase Adjusts the focus of the display (VGA input only). This adjustment allows you to remove any horizon tal noise[...]

Table 4-3 OSD Menu (continued) Icon Main Menu Submenu Description Power On Recall Restores power to the monitor following an unexpected removal of power. Select: ● On ● Off The factory default is On. Mode Display Displays the resolution, r efresh rate and frequency information on the screen each time the OSD Main Menu is accessed. Select: ● O[...]

Table 4-3 OSD Menu (continued) Icon Main Menu Submenu Description Sleep Timer Provides the time r adjustment menu options: ● Set Current Time—sets the current time in hours and minutes ● Set Sleep Time—sets the time you want to place the monitor in sleep mode ● Set on Time—sets the time you want the monitor to wake up from sleep mode ?[...]

Table 4-3 OSD Menu (continued) Icon Main Menu Submenu Description Auto-Switch Source Turns the system 's automatic video signal input to On or Off. The factory default is On. Exit Exits the OSD menu screen. Optimizing Digital Conversion Two controls in the on-scree n display can be adj usted to imp rove image performance: Clock a nd Clock Phas[...]

Identifying Monitor Conditions Special messages will appear on the monitor scr een when identif ying the following monitor conditions: ● Monitor Stat us —When the monitor is po wered on or wh en the inpu t source signal is changed, a Monitor Status message is displayed for five se conds. The message shows which input is the current active signa[...]

Sleep Timer Mode The Sleep Timer mo de is an energy-saving featu re that enables you to set a time for the mo nitor to power on and off at the same time every day. This also exte nds the l ife of the backligh t bulbs in the monitor. The Sleep Ti mer has five settings: ● Set Current Time ● Set Sleep Time ● Set On Time ● Timer: On/Of f ● Sl[...]

sRGB Support The monitor is de signed to support sRG B for colo r manageme nt, which adapts to the color standard s used in the image technology industr y. To take advantage of the sRGB supp ort, you will need to change the monitor’s color temperature to Standard and install the sRGB color profile (ICM) file. NOTE: The sRGB color temperature pr e[...]

Installing the sRGB ICM File for Microsoft Windows 7 1. Click Appearance and Persona lization icon in the Control Panel. 2. Click Display . 3. Click Change display setti ngs . 4. Click Advanced settings . 5. Click the Color Management tab, then click the Colo r Management button. 6. Click the Advanced tab, then click the Change System Defaults butt[...]

A Troubleshooting Solving Common Problems The following table list s possible problems, the possible cause of each problem, and t he recommended solutions. Problem Possible Cause Solution Power LED is not on. Power is not on. Ensure that the power cord is proper ly connected to a grounded power outlet and to the monitor, and the monitor power butto[...]

Problem Possible Cause Solution Check Video Cable is displayed o n screen. Monitor video cable is disconnected. Connect the appropriate video ca ble (HDMI, DVI, or VGA) between the computer and monitor. Be sure that the computer power is off while connecting the video cable. Input Signal Out of Range. Change Settings to 1920 × 1080 @ 60Hz is displ[...]

Online Technical Support For the online access to te chnical support informatio n, self-solve tools, online assistance, community forums of IT experts, broad mutlivendor knowledg e base, monitoring and diagnostic tools, go to http://www.hp.com/ support Preparing to Call Technical Support If you cannot solve a prob lem usin g the trou bleshooting ti[...]

B Technical Specifications NOTE: All performan ce specificatio ns are provided by the component manufa cturers. Performan ce specifications represent the h ighes t specification of all HP's compo nent manufacturers' typical level specifications for performance and actual perfo rmance may vary either high er or lower. 2310t and 2310ti Mode[...]

Table B -1 2310t and 2310ti Spe cifications (continu ed) Measured Power Consumption Full Power Typical Settings Sleep Bezel Switch Off 56 watt s 47 watt s 2 watts 1 watts Input Terminal One DVI connector with cable included (2310t and 2310ti models); one HDMI connector with cable not included ( 2310t model only); one VGA connector wi th cable not i[...]

3 576p 720 × 576 31.25 50 4 720p50 1280 × 720 37.5 5 0 5 1080p60 1920 × 1080 67.5 6 0 6 1080p50 1920 × 1080 56.25 50 Entering User Modes The video controller sig nal may occasionally ca ll for a mode that is not preset if: ● You are not using a standard graphics adapter. ● You are not using a preset mode. It this occurs, you may need to re [...]

C Agency Regulatory Notices Federal Communications Commission Notice This equipment ha s been teste d and found to comply with the limits fo r a Class B digita l device, pursuant to Part 15 of the FCC Rules. These lim its are de signed to provide reason able protection against harmful interferen ce in a residential inst allation. This e quipment ge[...]

For questions regard ing this FCC declaration, contac t: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 7726 9-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digita l apparatus meet s all require ments of the Canad ian In[...]

German Ergonomics Notice HP products which bear th e “GS” approval m ark, when formin g part of a system compri sing HP brand computers, keyboards and monitors that bear th e “GS” appro val mark, meet the applicable ergonomic requirements. The installation guide s included wi th the products provide configura tion information. Japanese Noti[...]

Product Environmental Notices Materials Disposal This HP product contains mercury in th e fluoresce nt lamp in the display LCD tha t might requ ire special handling at en d-of-life. Disposal of this mate rial can be regulated beca use of environment al consideration s. For disposal or recycling information, contact the l ocal authorities or the Ele[...]

11363-2006 11363-2006 Turkey EEE Regulation In Conformity with the EEE Regulation EEE Yönetmeli ğ ine Uygundur ENWW Product Environmental Notices 41[...]

D LCD Monitor Quality and Pixel Policy The TFT monitor u ses high-precision technology , m anufactured according to HP standard s, to guarantee trouble- free performanc e. Nevertheless, the display may have cosmetic imperfection s that appear as small bright or dark spots. This is co mmon to all LCD displays used in products supp lied by all vendor[...]