HP (Hewlett-Packard) C9N37US#ABA Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 159 Seiten
- 9.26 mb
Zur Seite of
Ähnliche Gebrauchsanleitungen
-
Laptop
HP (Hewlett-Packard) nx6110
201 Seiten 3.68 mb -
Laptop
HP (Hewlett-Packard) RZ1700
82 Seiten 1.4 mb -
Laptop
HP (Hewlett-Packard) 4311S
159 Seiten 3.05 mb -
Laptop
HP (Hewlett-Packard) dv6-3010us
129 Seiten 4.61 mb -
Laptop
HP (Hewlett-Packard) C6Y99UT#ABA
187 Seiten 6.59 mb -
Laptop
HP (Hewlett-Packard) N1010V
127 Seiten 5.68 mb -
Laptop
HP (Hewlett-Packard) D3K33UTABA
132 Seiten 5.54 mb -
Laptop
HP (Hewlett-Packard) DV6330EA
2 Seiten 1.09 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung HP (Hewlett-Packard) C9N37US#ABA an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von HP (Hewlett-Packard) C9N37US#ABA, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung HP (Hewlett-Packard) C9N37US#ABA die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung HP (Hewlett-Packard) C9N37US#ABA. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung HP (Hewlett-Packard) C9N37US#ABA sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts HP (Hewlett-Packard) C9N37US#ABA
- Den Namen des Produzenten und das Produktionsjahr des Geräts HP (Hewlett-Packard) C9N37US#ABA
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts HP (Hewlett-Packard) C9N37US#ABA
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von HP (Hewlett-Packard) C9N37US#ABA zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von HP (Hewlett-Packard) C9N37US#ABA und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service HP (Hewlett-Packard) finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von HP (Hewlett-Packard) C9N37US#ABA zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts HP (Hewlett-Packard) C9N37US#ABA, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von HP (Hewlett-Packard) C9N37US#ABA widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
HP EliteBook 8770w Mobile Workstation Maintenance and Service Guide IMPORTANT! This document is intended for HP authorized service providers only.[...]
-
Seite 2
© Copyright 2012 Hew lett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Centrino, and Core are trademarks or reg istered trademarks of Intel Corporation in the United States and other countries. Microsoft and Windows are U.S. registered trademarks of Mic[...]
-
Seite 3
Safety warning notice WARNING! To reduce the possibility of heat-related inju ries or of ove rheating th e computer, do not place the compu ter directly on your lap or o bstruct the computer air ven ts. Use the computer only on a hard, flat surface. Do n ot allow another hard surface, such as an adjoinin g optional printer, or a soft surface, such [...]
-
Seite 4
iv Safety warning no tice[...]
-
Seite 5
Table of contents 1 Product description ............ ......... ........... ......... ......... .......... .......... ........... ........ ............ ... ............. ........ ......... .. 1 2 External component id enti fication ...... ......... ........ ........... ........ ........ .......... ........ ........... ........ ... ........... ......[...]
-
Seite 6
Component replac ement procedur es .. .......... ........... ........ ........... ......... ............ ......... ........... ........ ... ... 49 Service tag and PCID label ....... ........... ........... ............... ........... ............ .......... ............... .... 49 Servic e tag .......... ............. ............ ............. ...[...]
-
Seite 7
Networ k cable and jack . ........... ......... .......... ........... ......... .......... ........... ......... .......... ......... 107 Power connector cable ........... ............ ........ ............ ........... ......... ........... ......... ............ ..... 107 Secur ity lo ck ........ ........ .......... ......... ....... ........... [...]
-
Seite 8
DVD±RW Supe rMulti Doubl e-Layer Dr ive specif ications ....... .............. ............. ............... ............... . 133 DVD-RO M Drive sp ecification s ...... .............. ......... ............. ............ ............. .......... ............. ........ ...... 134 7 Backup and recovery .................... ................. .......[...]
-
Seite 9
1 Product description Category Description Product Name HP EliteBook 8770w Mobile Workstation Processors Next Generation Intel® Core™ i7 proces sors, (support Intel Tu rbo Boost Technology): ● i7-3520M, 2.90 GHz (Turbo up to 3.60 GHz) , 1600 MHz, 4 MB L3 Cache, 4 threa ds, 35W ● i7-3610QM, 2.30 GHz (Turbo up to 3.30 GHz), 1600 MHz, 6 MB L 3 [...]
-
Seite 10
Category Description Supports the following configuratio ns: ● 2048 MB total system memory (2048 × 1) ● 4096 MB total system memory (4096 × 1) ● 4096 MB total system memory (2048 × 2) ● 8192 MB total system memory (8192 × 1) ● 8192 MB total system memory (4096 × 2) ● 8192 MB total system memory (2048 × 4); only available on comput[...]
-
Seite 11
Category Description 2 stereo speakers Integrated 720p HD webcam Modem 56K V.92 data/fax modem Supports “no modem” option Modem cable not included Ethernet Intel® 82579LM Gigabit Network Connection S3/S4/S5 wake on LAN NIC power-down technology Ethernet cable not included Wireless Integrated wireless local area n etwork (WLAN) options b y way [...]
-
Seite 12
Category Description Ports ● 1394a (1) ● Multi-pin AC port ● Audio in (mono microphone) ● Microphone input (stereo) ● Audio-out (stereo headphone) ● Display port (1.1a for NVIDIA, 1.2 for AMD) ● Docking connector ● eSATA/USB 2.0 combo ● RJ-11 (modem) ● RJ-45 (Ethernet, includes li nk and activity lights) ● USB 3.0 (2) ● USB [...]
-
Seite 13
Category Description Support for the following batteries: ● 8-cell, 2.8 Ah (83 WHr) Li-ion battery ● 8-cell, 2.8 Ah (75 WHr) Li-ion battery (available with 3 year warranty on ly) ● Supports 9-cell (73 WH r) polymer, HP ST09 Extended Life Battery (does not support HP Fast Charge) ● Supports 9-cell 3.0 Ah (100 WH r) cylindric al battery, HP B[...]
-
Seite 14
Category Description Web-only support: ● Windows XP Professional 64 (select models only) ● Windows XP Professional 32 (select models only) ● Windows 7 Ultimate 64 (select models only) ● Windows 7 Ultimate 32 (select models only) ● Windows 7 Enterprise 64 (select mo dels only) ● Windows 7 Enterprise 32 (select mo dels only) Serviceabilit[...]
-
Seite 15
2 External component identification Top Top 7[...]
-
Seite 16
Display — Windows models Component Description (1) Internal display switch Turns off the display or initiates Sleep if the display is closed while the power is on. NOTE: The display switch is not visi ble from the outside of the computer. (2) WLAN antennas (3)* Send and receive wireless sign als to communicate with wireless local area networks ( [...]
-
Seite 17
Display — SUSE Linux models Component Description (1) Internal display switch Turns off the display or initiates Suspend if the display is closed while the power is on. NOTE: The display switch is not visible from the outside of the computer. (2) WLAN antennas (3)* Send and receive wirele ss signals to com municate with wireless local area networ[...]
-
Seite 18
TouchPad Component Description (1) Left pointing stick button Can be used with the pointing stick and functio ns like the left button on an external mouse. (2) Center pointing stick button Can be used with the pointing stick and functio ns like the center button on an external mouse. (3) Pointing stick Moves the pointer and selects or activates ite[...]
-
Seite 19
Lights Component Description (1) TouchPad on/off light ● Off: The TouchPad is on. ● Amber: The TouchPad is off. (2) Caps lock light On: Caps lock is on. (3) Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. (4) Num lock light On: Num lock is on. (5) Wireless[...]
-
Seite 20
Buttons and fingerprint r eader (select models only) Component Description (1) TouchPad on/off button Turns the TouchPad on and off. (2) Power button ● When the computer is off, p ress the button to turn on the computer. ● When the computer is on, press the bu tton briefly to initiate Sleep/Suspend. ● When the computer is in the Sleep/Suspend[...]
-
Seite 21
Component Description (5) Web browser button When Windows is runn ing, press the butto n to open the default Web browser. (6) Calculator button Opens the Wi ndows calculator functio n. (7) Fingerprint reader Allows a fingerprint logon to Windows, instead of a password logon. Top 13[...]
-
Seite 22
Keys — Windows systems Component Description (1) esc key Displays system information when pressed in coMBination with the fn key. (2) Function keys Execute frequently us ed system functions when pressed in combination wi th the fn key. (3) fn key Executes frequently used system functions when pressed in combination with a function key or the esc [...]
-
Seite 23
Keys — SUSE Linux models Component Description (1) Function keys Execute frequently used system functions when pressed in combinat ion with the fn key. (2) fn key Executes frequently used system functions when pressed in combinat ion with a funct ion key. (3) Integrated numeric keypad When num lk has been enabled , it can be used like an external[...]
-
Seite 24
Component Description (1) Media Card reader Supports the following dig ital card formats: ● Secure Digital (SD) Card ● Secure Digital HC (SDHC) Card ● Secure Digital XC (SDXC) C ard ● MultiMediaCard (MMC) ● MultiMediaCardplus (MMC+) (2) Display release latch Opens the computer. (3) Wireless li ght ● White: An integrated wireless device,[...]
-
Seite 25
Right Component Description (1) Audio-out (headphone) jack Produces sound when con nected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. WARNIN G! To reduce the risk of personal injury, adjust the volume before putting on hea dphones, earbuds, o r a headset. For additional safety information, refer to the[...]
-
Seite 26
Left Component Description (1) Security cable slot Attaches an option al secur ity cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. (2) USB 3.0 ports (2) Connect optional USB 3.0 devices and provide enhanced USB power performance. (3) 1394 port Co[...]
-
Seite 27
Rear Component Description (1) RJ-11 (modem) jack Connects a modem cable. (2) Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. (3) Power connector Connects an AC ada[...]
-
Seite 28
Bottom Component Description (1) Battery bay Holds the battery. (2) SIM slot Supports a wireless su b scriber identity module (SIM). The SIM slot is located inside the b attery bay. (3) Battery release latch Releases the battery. (4) Accessory battery connector Connec ts an optional accessory battery. (5) Docking connector Connects an optional dock[...]
-
Seite 29
Component Description (9) Speakers (2) Produce sound. NOTE: To use the SRS Premium Sound software, select Start > All Programs > SRS Premium Sound . (10) Service door Provides access to the hard drive bay, the wireless LAN (WLAN) module slot, the WWAN module slot, an d the memory module slots. NOTE: To prevent an unresponsive system, replace [...]
-
Seite 30
3 Illustrated parts catalog Computer major components 22 Chapter 3 Illustrated parts catalo g[...]
-
Seite 31
Item Description Spare part number (1) Display Display panel, 43.9 cm (17.3 in), High Definition Plus (HD+) Anti-Glare (AG) WVA 691223-001 Display panel, 43.9 cm (17.3 in), FHD AG LED WVA 691224-001 Display assembly , 43.9 cm (17.3 in), FHD AG RGB LED UVWA Dream Color with webcam (not available with HP Mobile Broadba nd) (i ncludes displa y panel c[...]
-
Seite 32
Item Description Spare part number Without backlight, for use in Latin America 688737-161 With backlight, for use in Latin America 688738-161 Without backlight, for international use 688737-B31 With backlight, for international use 688738-B31 Without backlight, for use in Northwest Africa 688737-FP1 Without backlight, for use in Norway 688737-091 W[...]
-
Seite 33
Item Description Spare part number With backlight (Windows 8) for use in Russia 701978-251 With backlight (Windows 8) for use in Thailand 701978-281 With backlight (Windows 8) for use in Belgium 701978-A41 With backlight (Windows 8) for use in Taiwan 701978-AB1 With backlight (Windows 8) fo r use in South Kor ea 701978-AD1 With backlight (Windows 8[...]
-
Seite 34
Item Description Spare part number Without backlight, with pointing stick (Win dows 8) for use in South Korea 701977-AD1 Without backlight, with pointing stick (Win dows 8) for use in Internationally 701977-B31 Without backlight, with pointing stick (Win dows 8) for use in Sweden and Finland 701977-B71 Without backlight, with pointing stick (Window[...]
-
Seite 35
Item Description Spare part number (10) Graphics board (includes replacement thermal material): AMD FirePro M5950 XT-GL 1GB GDDR5 (DP 1.2 and Eyefinity Plus support) 689279-001 NVIDIA Quadro 3000M, N14E-Q1 2 GB dedicated GDDR5 video memory 689280-001 NVIDIA Quadro 4000M, N14E-Q3 2 GB dedicated GDDR5 video memory 689281-001 NVIDIA Quadro 5010M, N14E[...]
-
Seite 36
Item Description Spare part number (19) Audio/USB 2.0 board 689284-001 (20) Display (VGA) port 696435-001 (21) Power connector cable NOTE: The power connector cable is included in the Cable Kit, spare part n umber 652545-001. (22) Modem cable 628824-001 (23) Network cable (includes RJ-45 jack) NOTE: The network cable is included in the Cable Kit, s[...]
-
Seite 37
Display components Item Description Spare part number (1) Display b ezel Display bezel 688763-001 (2) Webcam module 688752-001 (3) Display Display panel, 43.9 cm (17.3 in), FHD AG WVA 691224-001 Display panel, 43.9 cm (17 .3 in), HD+ AG WVA 691223-001 Display components 29[...]
-
Seite 38
Item Description Spare part number Display assembly, 43.9 cm (17.3 in), FHD AG RGB LED UVWA Dream Color with webcam (not availab le with HP Mobile Br oadband) ( includes display panel cable, 3 WLAN antenna and cables, and 2 WWAN antenna and cables) 688736–001 Display assembly, 43.9 cm (17.3 in), FHD AG RGB LED UVWA Dream Color withou t webcam (no[...]
-
Seite 39
Mass storage devices Item Description Spare part number (1) 7.0 mm (0.28 in), 9.5 mm (0.37 in), or 12.7 mm (0.5 in) hard drive : NOTE: The hard drive bracket is included in the Hard Drive Hardw are Kit, spare part number 642774-001. ● 750 GB, 7200-rpm 633252-001 ● 500 GB, 7200-rpm 634925-001 ● 320 GB, 7200-rpm 634862-001 ● 320 GB, 7200-rpm [...]
-
Seite 40
Item Description Spare part number DVD-ROM Drive 688769-001 (5) 6.35 cm (2.50 in) Solid-state drive (includes bra cket): ● 256 GB solid-state drive Self-Encrypting drive (SED) 68876 7-001 ● 128 GB solid-state drive ● 688766-001 ● 160 GB solid-state drive 688768-001 ● 180 GB solid-state drive 700373-001 ● 2 4 G B s o li d - s t a t e d r[...]
-
Seite 41
Miscellaneous parts Description Spare part number AC Adap ter 200W PFC Slim AC Smart Adapter 693708-001 230W PFC AC Smart Adapter 693714-001 Power cord (3 conductor, black, 1.83 m ): For use in Argentina 491683-D01 For use in Australia 491683-011 For use in Brazil 491683-202 For use in Denmark 491683-081 For use in Europe, the Middle East, and Afri[...]
-
Seite 42
Sequential part number listing CSR flag designations: A = Mandatory B = Optional C = Service technician re commended N = Non-user rep laceable Spare part number CSR flag Description 434594-001 A Optical USB travel mouse 491683-001 A Power cord for use in North America (3 conductor, black, 1.83 m ) 491683-011 A Power cord for use in Australia (3 con[...]
-
Seite 43
Spare part number CSR flag Description 634089-001 A Battery, 9-cell, Li-ion, 2.2 Ah (73 WHr) 634400-001 A WWAN, HP un2430 EV-DO/HSPA Mobile Broadband Module 634862-001 A Hard drive, 320 GB, 7200-rpm SATA 634925-001 A Hard drive, 500GB, 7200-rpm SATA 641369-001 A Memory module, 4GB (PC3-12800, 1600 MHz) 642774-001 A Hard Drive Hardware Kit (includes[...]
-
Seite 44
Spare part number CSR flag Description 669832-001 A Broadcom 802.11a/b/g/n 2x2WiFi Adapter 670034-001 A Memory module, 8 GB (PC3-12800, 1600 MHz) 674318–001 Laser USB travel mouse 680646-001 N Next Generation Intel® Core™ i7 Processor i7-3610QM, 2.30 GHz (Turbo up to 3.30 GHz), 1600 MHz, 6 MB L3 Cache, 8 threads, 45W 681283-001 N Next Generati[...]
-
Seite 45
Spare part number CSR flag Description 688737-141 A Keyboard without backlight fo r use in Turk ey (includes keyboard cab le, pointing stick and pointing stick cable) 688737-151 A Keyboard without backlight for use in Gr eece (includes keyboard c able, pointing stick and pointing stick cable) 688737-161 A Keyboard without backlight for use in La ti[...]
-
Seite 46
Spare part number CSR flag Description 688737-FL1 A Keyboard w ithout backlight for use in Cz echoslovakia ( includes keyboard cable, p ointing stick and pointing stick cab le) 688737-FP1 A Keybo ard without backlight for use in No rthwest Africa (includes keyboard cable , pointing stick and pointing stick cab le) 688738-001 A Keyboard with backlig[...]
-
Seite 47
Spare part number CSR flag Description 688742-001 A Smart Card (includes cable) 688743-001 N Fingerprint reader (includes cable) 688744-001 A Screw Kit 688745-001 N System board for use with computer models equipped with Intel qu ad-core processors in all countries and regions exc ept the People's Republic of China (includes re placement therm[...]
-
Seite 48
Spare part number CSR flag Description 689281-001 N Graphics board, NVIDIA Quadro 4000M, N14E-Q3 2 GB dedicated GDDR 5 video memory 689282-001 N Graphics board, NVIDIA Quadro 5010M, N14E-Q5 4 GB dedicated GDDR 5 video memory 689283-001 N USB 3.0 board (i ncludes cab le) 689284-001 N Audio/USB 2.0 board 690034-001 N System board for use with compute[...]
-
Seite 49
Spare part number CSR flag Description 701977-091 A Keyboard (Windows 8) without backlight for use in Norway (i ncludes keyboar d cable, pointing stick and pointing stick cable) 701977-131 A Keyboard (Windows 8) without backlight for use in Portugal (i ncludes keyboard cable, pointing stick and pointing stick cable) 701977-141 A Keyboard (Windows 8[...]
-
Seite 50
Spare part number CSR flag Description 701977-DB1 A Keyboard (Windows 8) without backli ght for use in Canada (includes keyboard cable, pointing stick and pointing stick cable) 701977-DD1 A Keyboard (Windows 8) without backlight for use in Iceland (i ncludes keyboard ca ble, pointing stick and pointing stick cable) 701977-FL1 A Keyboard (Windows 8)[...]
-
Seite 51
Spare part number CSR flag Description 701978-FL1 A Keyboard (Windows 8) with backlight for use in C zechoslovakia (includes keyboard cable, pointing stick and pointing stick cable) 702080–001 A Intel® Centrino™ 2430, EV-D O/HSPA minicard WLAN module 705053–001 N 128 GB solid-state drive (includ es bracket) 710788–001 A F5321GWX HSPA + wit[...]
-
Seite 52
4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to comple te the removal and re placement procedures: ● Flat-bla ded screw driver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdr iver ● 5.0 mm hex socket driver Service considerations The f[...]
-
Seite 53
Cables and and pointing stick con nectors CAUTION: When servicing the computer, be sure that c ables are placed in their prop er locations during the reassembly p rocess. Improp er cable placem ent can damage th e computer. Cables must be handle d with extreme care to avo id damage. Apply only the ten sion require d to unseat or seat the cables dur[...]
-
Seite 54
Grounding guidelines Electrostatic discharge damage Electronic componen ts are sensit ive to electrost atic discharge (ESD). Circuitry design and st ructure determine the degre e of sensitivit y. Networks bu ilt into many integrated and p ointing stick circuits provide some protection , but in many case s, ESD contains enough power to alte r device[...]
-
Seite 55
Packaging and transporting guidelines Follow these groun ding guidelines whe n packaging and transp orting equipment: ● To avoid hand an d pointing stick con tact, transpor t products in static-saf e tubes, bags, or boxes. ● Protect ESD-sen sitive parts and assemblie s with conductive o r approved and p ointing stick containers or packagin g. ?[...]
-
Seite 56
Equipment guidelines Grounding equi pment must include eith er a wrist strap o r a foot strap at a grou nded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexibl e straps with a minimu m of one megohm ±1 0% resistance in the g round and pointing stick cords. To provide proper g round, wear a str[...]
-
Seite 57
Component replacement procedures This chapter provides removal an d replacement proced ures. There are as many as 98 screws and screw locks that must be remo ved, replaced, or loosened when servicing the computer. Make special n ote of each screw and screw lock size and location during removal and replacement. Service tag and PCID label Service tag[...]
-
Seite 58
Windows 8 mod els Non Windows 8 mod els 50 Chapter 4 Remova l and replacement procedures[...]
-
Seite 59
Computer feet The computer feet (not illustrate d) are adhesive-backed rubber pads . The feet are included in the base enclosure spare part kit, sp are part number 68 8765-001. Th e rubber feet that attach to the base enclosure in the loca tions illustrated below. Battery Description Spare part number 8-cell, Li-ion 2.8 Ah (75 WH r) 632425-001 8-ce[...]
-
Seite 60
SIM Before removing the SIM, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by firs t unplugging th[...]
-
Seite 61
3. Disconnect th e power from the c omputer by firs t unplugging the power cord from the AC outlet and then unpl ugging the AC adap ter from the comput er. 4. Remove the batt ery (see Battery on page 51 ). Remove the service access cover: 1. Position the computer upside down on a flat surface, with the front toward you. 2. Slide the servic e cover [...]
-
Seite 62
Primary hard drive NOTE: The hard drive bracket is included in the Ha rd Drive Hardware Kit, spare part number 642774-001. Description Spare part number 750 GB, 7200-rpm SATA hard drive 633252-001 500 GB, 7200-rpm SATA hard drive 634925-001 500 GB, 7200-rpm SATA SED hard drive 634862-001 24 GB solid-state drive (includes bracket and screws) 701479?[...]
-
Seite 63
8. Lift the Smart Card reader to th e upright position (2) . 9. Loosen the Phillips M2.5 x10.5 captive screws (1) that secure th e hard drive to the co mputer. 10. Grasp the tab on the h ard dr ive and slide the hard drive (2) to disconnect it from the system board. 11. Lift the left side of the hard drive and remo ve the ha rd drive at an an gle f[...]
-
Seite 64
b. Lift the bracket (2) straight up to remove it from the hard drive. Reverse this procedure to rea sse mble and install the h ard drive. Secondary hard drive NOTE: The hard drive bracket is included in the Ha rd Drive Hardware Kit, spare part number 642774-001. Description Spare part number 750 GB, 7200-rpm SATA hard drive 633252-001 500 GB, 7200-[...]
-
Seite 65
3. Grasp the tab and slide the hard drive (2) to the right. Lift the hard driv e up to remove it fro m the hard drive bay (3) . 4. If it is nece ssary to remove the hard drive bracket, fo llow these steps: a. Remove the four Phi llips M3.0x3.0 screws (1) that secure the hard drive br acket to the har d drive. b. Lift the bracket (2) straight up to [...]
-
Seite 66
Smart Card reader Description Spare part number Smart Card reade r (with cable) 688742-001 Smart Card rea der cover 652546-001 Before removing the Smart Card reader, follow thes e steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating [...]
-
Seite 67
9. Slide the Smart Card reader b ack toward the h inges on the Smart Card reader cover, and remove the Smar t Card reader board (2) . Reverse this procedure to rea ssemble an d install the Sma rt Card reader. Bluetooth module NOTE: The Bluetooth modu le spare part kit does not include a Bluetooth module ca ble. The Bluetooth modul e cable is includ[...]
-
Seite 68
Remove the Blueto oth module: 1. Remove the Bluetoot h module cover. 2. Gently pry the Bluetooth module away from th e adhesive in the b ase enclosure and lift the Bluetooth module (1) . 3. Disconnect th e Bluetooth module fr om the Bluetooth cable (2) , and remove the module. Reverse this procedure to insta ll the Bluetooth module . WLAN module De[...]
-
Seite 69
Description Spare part number Intel Centrino Ultimate-N 6300, 802.11a/b/g/n WLAN module 69858 8-001 Broadcom 802.11a/b/g/n 2x2WiFi Adapter 669832-001 CAUTION: The WLAN module and the WWAN module are not inte rchangeable. To prevent an un responsive system, replace the w ireless module only with a w ireless module authorized for use in the comp uter[...]
-
Seite 70
WWAN module Description Spare part number HP un2430 EV-DO/HSPA Mobile Broadband Mo dule 634400-001 HP hs2340 HSPA+ Mobile Broadband Modu le 668969-001 HP un2430 EV-DO/HPSA minicard9999 702080-001 HSPA+ with GPS minicard 710788–001 CAUTION: The WWAN module and the WL AN module are not in terchangeable . To prevent an un responsive system, replace [...]
-
Seite 71
Reverse this procedure to insta ll the WWAN module. RTC battery Description Spare part number RTC battery 651948-001 Before r emoving th e RTC bat tery, foll ow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Di[...]
-
Seite 72
Description Spare part number Blu-ray ROM DVD±RW SuperMulti Double-Layer Drive 688771-001 DVD-ROM Driv e 688769-001 Before removing the optical drive, follow these ste ps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Dis[...]
-
Seite 73
5. If it is necessary to replace the optical drive bracket: a. Position the optical dr ive with the rear toward you. b. Remove the three Ph illips M2.0×3.0 screws (1) that secure th e optical drive bracket to the optical drive. c. Remove the optical drive bracket (2) . 6. If it is nece ssary to remo ve the optica l drive bezel: a. Insert the end o[...]
-
Seite 74
c. Firmly pull ou tward on the bezel to remove the be zel from the optical drive tray. Reverse this procedure to rea ssemble an d install the optical drive. Upgrade bay hard drive NOTE: The hard drive bracket is included in the Ha rd Drive Hardware Kit, spare part number 642774-001. Description Spare part number 7.0 mm , 9.5 mm , or 12.7 mm 500 GB [...]
-
Seite 75
2. Remove the four Phillips PM3.0×3.0 screws that secure the upgra de bay hard driv e carrier to the computer. 3. Loosen the 2 Phillips captive screws (1) that secure the hard drive to the carrier. 4. Insert a flat-bladed screwdriver or similar to ol into the upgrade bay ha rd drive tab access (2) and press the tab to th e left to release th e upg[...]
-
Seite 76
A computer having a system board with spare part number 690034-001 or 688745-001 has two memory slots (primary memory slots). When addin g or replacing memory modules, slot 1 must be populated before slot 2 is populated. A computer having a system board with spare part number 688746-001 or 690035-001 has four memory slots (expansion memory slots) ([...]
-
Seite 77
Reverse this procedure to in stall a primary me mory module. Expansion memory module NOTE: Expansion memory slots are locate d in a co mp artment on the botto m of the computer. A computer having a system board with spare part number 690034-001 or 688745-001 has two memory slots, which are called primary memory sl ots in this MSG. When you add or r[...]
-
Seite 78
2. Remove the expan sion memory modu le (2) by pulling the module away from the slot at an angle. NOTE: Memory modules a re designed with a n otch (3) to prevent incorrect install ation into the expansion memory modu le slots. Reverse this procedure to in sta ll an expansion memory module. 70 Chapter 4 Remova l and replacement procedures[...]
-
Seite 79
Keyboard For use in: Spare part number For use in: Spare part number Keyboard with backlight (includes keyboard cable, pointing st ick and pointing stick cable): Belgium 688738-A41 Norway 688738-091 Denmark 688738-081 Russia 688738–251 Finland and Sweden 688738-B71 France 688738-051 Germany 688738-041 South Korea 688738-AD1 Thailand 68 8738-281 S[...]
-
Seite 80
For use in: Spare part number For use in: Spare part number Spain 701977-071 Denmark 701977-08 1 Norway 70 1977-091 Portugal 701977-131 Turkey 701977-141 Greece 701977-151 Latin America 70 1977-161 Saudi Arabia 701977-17 1 Brazil 701977-201 Hungary 701977-21 1 Russia 701977-251 Bulgaria 70197 7-261 Romania 701977- 271 Thailand 701977-281 Japan 7019[...]
-
Seite 81
5. Remove the service access cover (see Service access cover on page 52 ). 6. Remove the optical drive (see Optical driv e on page 63 ) or upgrade bay hard drive (see Upgrade bay hard drive on page 66 ). NOTE: The optical drive or hard d riv e carrier in the upgrade bay must be remo ved in order to remove the keyboard. Remove the keyboard: 1. Posit[...]
-
Seite 82
4. Insert a small tool at an an gle through the ho le in the optical dr ive bay at an angle to push out the top edge of the keyboard. This gives you access to the back of the ke yboard and release s the top edge of the keyboard. NOTE: Make sure that the optical drive or upgr ade hard d rive have been remo ved before performing this proc edure. 5. T[...]
-
Seite 83
10. Release the pointing sti ck ZIF connector (3) an d lift the cable (4) to release it. Reverse this procedure to insta ll the keyboard. Fan/graphics board heat sink assembly NOTE: The fan/graphics board he at sink assembli es in clude replacement ther mal material. Description Spare part number For use only with computer models equipped with AMD [...]
-
Seite 84
5. Remove the service access cove r (see Service access cover). 6. Remove the optical drive (see Optical driv e on page 63 ) or upgrade bay hard drive (see Upgrade bay hard drive on page 66 ). 7. Remove the keyboard (see Keyboard on page 71 ). 8. Remove the top cover (see Top cover on page 83 ) 9. Remove the display assembly (see Display assembly o[...]
-
Seite 85
2. Lift the heat sink/fan assembly (2) straight up to remove it. NOTE: Due to the adhe sive quality of the thermal material locate d between the fa n/graphics board heat sink assembly an d graphics board co mponents, it ma y be necessary to mo ve the graphics board heat sink from side to si de to detach it from the system board. NOTE: The thermal m[...]
-
Seite 86
Display bezel Description Spare part nu mber Display bezel for use with computer models without a webcam 688763-001 Before removing the display beze l, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disc[...]
-
Seite 87
3. Flex the inside ed ges of the top edg e (3) , the left and right side s (4) , and the bottom edge (5) of the display beze l until the bezel disen gages from the display enclosure and then remove the bezel (6) . Reverse this procedure to insta ll the display bezel. Display panel Description Spare part number 43.9 cm (17.3 in), HD+ AG LED WVA 6912[...]
-
Seite 88
3. Remove the 1 Phillips screws (3) that secure the d isplay panel bracke ts to the hinge pipe. 4. Slide the hinge pipe to the ri ght (1) and remove the hinge pip e (2) . NOTE: Make sure you pu ll back the antenn a cables when removing the hinge pipe. 5. Remove the display panel. Reverse this procedure to rea ssemble an d to install the displ ay pa[...]
-
Seite 89
Display panel cable Description Spare part number Display panel cable (select models only) 688761-001 To remove the disp lay panel cable: ▲ Release the adhesive tape that secures the display pane l cable to the display panel (1) . Disconnect th e cable (2) , and then remove the cable (3) . Hinge brackets Description Spare part number Display hing[...]
-
Seite 90
▲ Remove the 4 screws that secu re each hinge a ssembly to the pan el (1) , and then remove the hinge brackets (2) . Webcam module Description Spare part number Webcam module with microphone 688752-001 Before removing the webcam modu le, follow these ste ps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rna[...]
-
Seite 91
Remove the webcam module: 1. Lift the WLAN antenna cab les (1) , and then remove the WWAN antenn a cables (2) . 2. Remove the webcam cable (1) from the hinges and then di sconnect the webcam ca ble from the display enclosure (2) . 3. Remove the webcam modul e from the display e nclosure (3) . Reverse this procedure to in stall the webcam mod ule. T[...]
-
Seite 92
Before removing the top cover, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by firs t unplugging [...]
-
Seite 93
3. Remove the two Phillips M2.5x3 screws in the optical driv e/upgrade drive bay (1) and the four Phillips M2.5x3.0 screws inside the battery bay (2) . 4. Disconnect the power bu tton board cable (1) . Disconne ct the Tou chPad cable on the left (2) and the right sides (3) . 5. Disconnect the fingerprint reade r cable (4) and then disconnect th e a[...]
-
Seite 94
7. Grasp the top cover by the hole in the optical di sk drive/upgrad e drive bay and li ft up the front edge of the top cover (1) . 8. Remove the top cover fr om the base enclosure (2) . 9. If it is necessary to replace the TouchPad: a. Lift the adhe sive tape (1) , lift and release the TouchPad cab le from the open ing in top cover (2) , and then [...]
-
Seite 95
d. Release the TouchPad from the front right side clip (3) and then remove the Tou chPad from the top cover. Reverse this procedure to in stall the top cover an d TouchPad. NOTE: In revers ing this proc edure, make sure that the display latch assemb ly actuator lines up correctly with the top cover to a void damaging any components. Component repla[...]
-
Seite 96
Display assembly Description Spare part number Display panel, 43.9 cm (17.3 in), High Definition Plus ( HD+ ) Anti-Glare (AG) L ED WVA without webcam 691223-001 Display panel, 43.9 cm (17.3 in), FHD AG LED WVA 691224-001 43.9 cm (17.3 in), FHD AG RGB LED UVWA Dream Co lor with webcam (not available with HP Mobile Broadband) 688736-001 43.9 cm (17.3[...]
-
Seite 97
2. Remove the tape (1) that secures the WLAN and WWAN cables to the system board. (2) . 3. Turn the computer right side up, facing you. Feed the WLAN and WWAN cables thro ugh the hole next to the keyboard screw (1) , and then lift th e cable free of th e routing areas (2) . Disconnect th e webcam cable (3) . 4. Position the computer with the rear t[...]
-
Seite 98
5. Disconnect th e display panel cab le (1) , and then remove the cable (2) . NOTE: Make sure all cab les are freed from the clips i n the routing channel. 6. Turn the unit aroun d, and then remove the Torx M2.5 x7.0 screws (1) that secure the display hinges to the base enclosure. Next , remove th e Torx M2.5x3. 0 screws (2) that secure the hinge c[...]
-
Seite 99
7. Position the computer with the rear towa rd you. Lift the rear hinges a nd remove. 8. Remove the two 6 millimeter Torx screws securing the displa y panel to the base enclosure (1) `, and then remove th e display panel (2) . Reverse this procedure to rea ssemble and to install the displ ay assembly. Power button board Description Spare part numbe[...]
-
Seite 100
Before removing the power button board, follow th ese steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by firs t u[...]
-
Seite 101
Before removing the application butto n board, follow the se steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by f[...]
-
Seite 102
Before removing the fingerprint reader, fo llow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by firs t u[...]
-
Seite 103
Before removing the Audio/USB 2.0 board, foll ow these ste ps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by firs t[...]
-
Seite 104
Speaker assembly Description Spare part number Speaker assembly 652540-001 Before removing the speaker assembly, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected [...]
-
Seite 105
2. Gently flex the band on th e base enclosure next to the speaker assembly, a nd remove the speaker assembl y (2) . Reverse this procedu re to install the speake r assembly. Modem module NOTE: The modem module spare part kit does not includ e a modem module cable. The mo dem module cable is in cluded in the Cable Kit, spare pa rt number 65254 5-00[...]
-
Seite 106
6. Remove the optical drive (see Optical driv e on page 63 ) or upgrade bay hard drive (see Upgrade bay hard drive on page 66 ). 7. Remove the keyboard (see Keyboard on page 71 ). 8. Remove the top cover (see Top cover on page 83 ). 9. Remove the Smart Card read er (see Smart Card reader on page 58 ). 10. Remove the Audio/USB 2.0 board (see Audio/U[...]
-
Seite 107
7. Remove the keyboard (see Keyboard on page 71 ). 8. Remove the top cover (see Top cover on page 83 ). 9. Remove the Smart Card read er (see Smart Card reader on page 58 ). 10. Remove the Audio/USB 2.0 board (see Audio/USB 2.0 board on page 94 ). Remove the VGA port: ▲ Remove the Phillips screw (1) that secures the display (VGA) port to the base[...]
-
Seite 108
Modem module cable NOTE: The modem module ca ble is included i n th e Cable Kit, spare part number 65 2545-001. Before removing the modem module cable, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disc[...]
-
Seite 109
Reverse this procedure to in stall the modem module cable. Component replacemen t procedures 101[...]
-
Seite 110
Card reader/USB 3.0 board Description Spare part number Card reader/USB 3.0 board 689283-001 Before removing the card reader/USB 3. 0 board, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all [...]
-
Seite 111
Bluetooth module cable NOTE: The Bluetooth modu le cable is included in the Cable Kit, spa re part number 6525 45-001. Before removing the Bluetooth modul e cable, follow these ste ps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating sy[...]
-
Seite 112
NOTE: Models that supp ort quad-core processors have fo ur memory slots. Models t hat support dual-core proce ssors have two memory slots. Description Spare part number For use in all countries and regions ex cept the People's Republic of C hina: ● For use with computer models equip ped with Intel quad-core pro cessors 688746-001 ● For use[...]
-
Seite 113
● Primary memory modules (see Primary memory module on page 67 ) ● Expansion memory m odules (see Expansion memory module on page 69 ) ● Graphics board (see Graphics board on page 115 ) ● Processor heat sink (see Processor heat sink on page 110 ) ● Processor (see Processor on page 112 ) ● Modem module (see Modem module on pag e 97 ) Rem[...]
-
Seite 114
4. Remove the 4 Phillips M2.5x3.0 screws (marked wi th a triangle icon) th at secure the system board to the base enclos ure (2) , and th en remove the sh ort stand off screw (3) and the tall stand off screw (4) . 5. Lift up on the right side of the system board (1) , and then remove the system board (2) by sliding it out. Reverse this procedure to[...]
-
Seite 115
Network cable and jack NOTE: The network cable is included in the Ca ble Kit, spare part number 652545-0 01. Before removing the networ k cable, fo llow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect[...]
-
Seite 116
Before removing the power connecto r cable, follow th ese steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by firs[...]
-
Seite 117
Before removing the security lock, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the c omputer by firs t unplugg[...]
-
Seite 118
3. Rotate the security lock a way from the base en cl osure and remove the security lo ck from the base enclosure (2) . Reverse this procedure to insta ll the security lock. Processor heat sink Description Spare part number For use only with computer models equipped with quad-core processor s 653629-001 For use only with computer models equi pped w[...]
-
Seite 119
Remove the processor heat sink: 1. Following the sequence stamped in to the processor heat sink, lo osen the four Phillips captive screws (1) that secure the p rocessor heat sink to the system board. NOTE: Due to the adhe sive quality of the thermal material locate d between the processor hea t sink and the processor, it may be necessary to mo ve t[...]
-
Seite 120
Processor NOTE: The processor spare part kit includes re placement thermal material. Description Spare part number Next Generation Intel® Core™ processors , (support Intel Tur bo Boost Technol ogy) (includes replacement thermal material): i7-3610QM, 2.30 GHz (Turbo up to 3.30 GHz), 1600 MHz, 6 MB L3 Cache, 8 threads, 45 W 680646-001 i7-3720QM, 2[...]
-
Seite 121
2. Lift the processor (2) straight up and remove it. NOTE: When you install the pro cessor, the gold triangle (3) on the processor must be aligned with the triangle (4 ) embossed on the processor socket. Reverse this procedure to insta ll the processor. Component replacemen t procedures 113[...]
-
Seite 122
Fan/Heat sink ▲ Remove the 4 screws secu ring the fan /heat sink (1) , and then remo ve the fan/heat sink (2) . NOTE: Make sure the fan cable is disc onnected from the system board. NOTE: This diagram shows a view of of the processor (1) th e paste (2) , the board components (3) , and the pads (4) . Thermal paste must be th oroughly removed a nd [...]
-
Seite 123
Graphics board NOTE: The graphics board spare part kit incl udes replaceme nt thermal material. Description Spare part number AMD FirePro M5950 XT-GL 1GB GDDR5 (DP 1.2 and Eyefinity Plus support) 689279-001 NVIDIA Quadro 5010M, N14E-Q5 4 GB dedicated GD DR5 video memory 689282-001 NVIDIA Quadro 4000M, N14E-Q3 2 GB dedicated GD DR5 video memory 6892[...]
-
Seite 124
2. Lift the right edge of the grap hics board unti l it rests at an angle and re move (2) . Reverse this procedure to insta ll the graphics board. Fan Description Spare part number Fan 688762-001 Before removing the fan, follow these step s: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the comp[...]
-
Seite 125
2. Remove the fan (2) . Reverse this procedure to insta ll the fan into the fan/graphics bo ard heat sink assembly. Component replacemen t procedures 117[...]
-
Seite 126
5 Computer Setup (BIOS) and Advanced System Diagnostics Computer Setup, or Basic Input/Ou tput System (BIOS), controls communication betwe en all the inpu t and output devices on the system (such as disk drive s, display, keyboard, mous e, and printer). Computer Setup includes settings for the types of pe ripherals i nstalled, the startup seque nce[...]
-
Seite 127
NOTE: You can us e either a pointing device (T ouchP ad, p ointing stick, or USB mouse) or the keyboard to navigate a nd make selections in Compu ter Setup. 2. Press f10 to enter Computer Setup. To exit Computer Setup menu s, choose one of the following method s: ● To exit Computer Setup menus without saving your chan ges: Click the Exit icon in [...]
-
Seite 128
Updating the BIOS Updated versions of the BIOS ma y be avail able on the HP we bsite. Most BIOS update s on the HP website are packaged in compre ssed files called SoftPaqs . Some download packa ges contain a file n amed Read me.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To determ[...]
-
Seite 129
BIOS installation procedures vary . Follow any instructions that are d isplayed on the scree n after the download is complete. If no instructions are d isplayed, follow these steps: 1. From the Start screen, type e , and then click File Explorer . 2. Click your hard drive de signation. The ha rd dr ive designa tion is typicall y Local Disk (C:). 3.[...]
-
Seite 130
To exit Computer Setup menu s, choose one of the following method s: ● To exit Computer Setup me nus withou t saving your changes, click the Exit icon in the lower-left corner of the screen, an d then follow the on-screen in structions. – or – Use the tab key and the arro w keys to select File > Ignore Changes and Exit , and then press ent[...]
-
Seite 131
Restoring factory setting s in Computer Setup NOTE: Restoring defaults will not change the hard drive mode. To return all settings in Computer Setup to the values that were set at the factory, follow these steps: 1. Turn on or restart the compu ter, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bo[...]
-
Seite 132
Downloading a BIOS update CAUTION: CAUTION: To reduce the risk of damage to the computer or an unsucce ssful installation, down load and install a BIO S update only when the computer is con nected to reliable external power using the AC ad apter. Do not d ownlo ad or in stall a BIOS update wh ile the compute r is running on battery powe r, docked i[...]
-
Seite 133
Using Advanced System Diagnostics Advanced System Diag nostics allows you to run dia gnostic tests to de termine if the computer hardware is functioning properly. The following di agnostic tests a re available in Ad vanced System Diagnostics: ● Start-up test—This test analyze s the main computer compo nents that are requ ired to start the compu[...]
-
Seite 134
To start Computer Se tup, follow these ste ps: 1. Turn on or restart the compu ter, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of th e screen. 2. Press f10 to enter Computer Setup. Using Computer Setup Navigating and selectin g in Computer Setup To navigate and select in C omputer Setup,[...]
-
Seite 135
3. Use a pointi ng device or the arrow keys to select Fi le > Restore Defaults . 4. Follow the on-screen instructions. 5. To save your change s and exit, click the Save icon in th e lower-left corner of the screen, and then follow the on-scre en instructions. – or – Use the arrow keys to select File > Save Changes and Exit , and then pres[...]
-
Seite 136
Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an u nsuccessful installation, downlo ad and install a BIOS update only when the computer is connected to reli able external power u sing the AC adapter. Do not d ownload or install a BIOS up date while the computer is running on batte ry power, docked in an optional[...]
-
Seite 137
To start Advanced System Diagnostics: 1. Turn on or restart the compu ter. While the “Press the ESC ke y for Startup Me nu” message is displayed in the lo wer-left corner of the screen , press esc . When the Startup Menu is d isplayed, press f2 . 2. Click the diagnostic test you want to run, and then follow the on-screen instructions. NOTE: If [...]
-
Seite 138
6 Specifications Computer specifications Metric U.S. Dimensions Width 41.70 cm 16.40 in Depth 27.20 cm 10.70 in Height (front to back) 3.70 cm to 4.30 cm 1.47 in to 1.68 in Weight 3.60 kg 7.96 lbs Input power Operating voltage 19.5 V dc @ 4.74 A – 120 W Operating current 4.74 A Temperature Operating 5°C to 35°C 41° F to 95°F Nonoperating -20?[...]
-
Seite 139
43.9 cm (17.3 in) WVA display specifications Metric U.S . Dimensions Width 24.4 cm 9.65 in Depth 38.1 cm 15.0 in Diagonal 43.9 cm 17.3 in Number of colors Up to 16.8 million Contrast ratio 200:1 (typical) Brightness 180 nits (typical) Backlight LED Character display 80 × 25 Total power consumpt ion 6.0 W Viewing angle +/-65 horizontal, +/-50° ver[...]
-
Seite 140
Blu-ray R/RE DVD±RW SuperM ulti Double-Layer Drive specifications Applicable disc Read: Write: BD-ROM, BD-ROM-DL, BD-R, BD-R- DL, BD-RE, BD-RE-DL, DVD-ROM, DVD+R, DVD+R-DL, DVD +RW, DVD- R, DVD-R-DL, DVD-RW, DVD- RAM (Ver.2), CD-DA, CD-ROM (mode 1 and mode 2), CD-ROM XA (mode 2, form 1 and form 2), Photo CD (single and multiple sessions), CD Extra[...]
-
Seite 141
Applicable disc Read: Write: 24X CD-R 3,600 KB/sec 16X CD-RW 2,400 KB/sec 8X DVD+R 10,800 KB/sec 4X DVD+RW 5,400 KB/sec 8X DVD-R 10,800 KB/sec 4X DVD-RW 5,400 KB/sec 2.4X DVD+R(9) 2,700 KB/sec 5X DVD-RAM 6,750 KB/sec 1X BD-ROM 4,500 KB/sec 1X BD-R read 4,500 KB/sec 1X BD-RE read 4,500 KB/sec Transfer mode Multiword DM A Mode DVD±RW SuperMulti Doub[...]
-
Seite 142
Applicable disc Read: Write: 5X DVD-RAM 6,750 KB/sec Transfer mode Multiword D MA Mode DVD-ROM Drive specifications Applicable disc Read: Write: CD-DA, CD+(E)G, CD mIDI, CD- TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo cD, Video CD), Multisession CD (Photo cD, CDEXTRA, Portfolio, CD-R, CD-RW), CDR, CD-RW, DVD-ROM (DVD-5, DVD-9, [...]
-
Seite 143
7 Backup and recovery To protect you r information, use Windows Backup and Restor e to back up individu al files and folder s, back up your entire hard drive (s elect models only), cr eate syst em repair discs (select models only) with the installed optica l drive (select models only) or an optional external optica l drive, or create system restore[...]
-
Seite 144
Creating recovery media NOTE: The Windows DVD can be created only once. Therea fter, the option to create that media will not be available. 1. Select Start > All Programs > Productivity and Tools > HP Reco very Disc Cr eator . 2. Select Driver DVD or Windows DVD . 3. From the drop -down menu, se lect the driv e for burning th e recovery me[...]
-
Seite 145
Performing a system recovery In case of system failure or inst ability, the computer provides the following tools to recover your files: ● Windows recovery to ols: You can use Wi ndows Backup and Re store to reco ver information you have previously backed up . You can a lso use Win dows Startup Repair to fix problems that might prevent Windows fr[...]
-
Seite 146
To recover the original hard drive image u sing f11 : 1. If possible, bac k up all personal files. 2. If possible, che ck for the presen ce of the HP Recovery partition: click Start , right-c lick Computer , click Manage , and then click Disk Mana gement . NOTE: If the H P Recove ry part ition has b een dele ted, the f11 restore option will not fun[...]
-
Seite 147
Using a Windows 7 operating system DVD (purchased se parately) To order a Windows 7 operating system DVD, go to the HP website. For U.S. support, go to http:// www.hp.com/ go/contactHP . For wo rldwide support, go to http://welcome.hp.com/ country/us/en/ wwcontact_us.html . You can also order the DVD by calling su pport. For contact information, se[...]
-
Seite 148
CAUTION: Some Startup Repair options will complete ly erase and reforma t the hard drive. All files you have created and an y software installed on the computer are perman ently removed. When reformatting is complete, the reco very process resto res the operating system, as well a s the drivers, software, and utilities from the ba ckup used for rec[...]
-
Seite 149
Using Windows 8 oper ating system media (p urchased separately) To order a Windows 8 oper ating system DVD , go to http://www.hp.com/ support , select your country or region, and follow the on-screen instructions. You can also order the DVD by calling support. For contact information , see the Worldwide Telephone Numbers booklet included with the c[...]
-
Seite 150
Using Windows Refresh fo r quick and easy recovery When your computer is not work ing properly and you need to regain system stability, the Windows Refresh option allo ws you to start fres h a nd keep what is importan t to you. IMPORTANT: Refresh re moves any traditional applications that were not origina lly installed on the system at the factory.[...]
-
Seite 151
3. Click Change PC setting s in the bottom-right corne r of the scre en, and then select General from the PC settings screen. 4. Under Remove everythi ng and reinstall Windows , select Get starte d , and follow the on- screen instructions. Using HP Software Setup HP Software Setu p can be used to reinsta ll drivers or select so ftware that ha s bee[...]
-
Seite 152
5. Using the arrow keys, select Yes when pr ompted: Do you want to start the System-Restore? 6. Follow the on-screen instructions. NOTE: You can also restore th e computer from the p a rtition by restarting the computer, and then pressing the f11 key . NOTE: If you are unable to boot (start up) your comp uter from the ha rd drive partition with the[...]
-
Seite 153
8 Power cord set requirements The wide-range input fe ature of the computer perm its it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor powe r cord set included wi th t he computer meets the req uirements for use in the country or region where the e quipment is purchased . Power cord sets for [...]
-
Seite 154
Country/region Accredited agency A pplicable note nu mber Sweden SEMKO 1 Switzerland SEV 1 Taiwan BSMI 4 The United Kingdom BSI 1 The United States UL 2 1. The flexible cord must be Type HO5VV-F, 3 -conductor, 1. 0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the ce rtif ication mark of the agency respons[...]
-
Seite 155
9 Recycling When a non-rechargeable or rechargeable ba ttery has reached the en d of its useful life, do not dispose of the batte ry in general house hold waste. Follow the local laws and regu lations in your area for battery disposal. HP encourages customers to recycle used electron ic hardware, HP original print cartridges, and rechargeable batte[...]
-
Seite 156
Index Symbols/Numerics 1394 port, identifying 18 A AC adapter, spare part numbers 33, 40 accessory battery connector, identifying 20 Antenna Kit spare part number 30, 35 application b utton board remov al 92 spare part number 92 audio in (microphone) jack 17 audio, product description 2 audio-out (head phone) jack 17 audio/USB 2.0 board remov al 94[...]
-
Seite 157
display release latch 16 Display Rubber Kit spare part number 35 display specifi cations 131 DisplayPort, identifying 18 docking connector, identifyin g 20 docking station spare part numbers 36 docking support, product description 4 drives, preventing damage 45 DVD-ROM Dr ive precautions 45 spare part number 28, 32, 39, 64 specifications 134 DVD±R[...]
-
Seite 158
mass storage dev ice , spare part numbers 28 Media Card reader, i dentifying 16 memory module product description 1 removal 67, 6 9 spare part number 36 spare part numbers 26, 27, 35, 67, 69 microphone product description 2 spare part number 30, 35 miscellaneous parts spare part numbers 33 model name 1 modem module product description 3 remov al 97[...]
-
Seite 159
RTC battery remov al 63 spare part number 26, 35, 63 S Screw Kit spare part number 33, 39 security cable slot, identifying 18 security lock removal 1 08 security, product description 5 sequential part numbe rs 34 serial number 49 service access cover remov al 52 spare part number 28, 52 service access door spare part numbers 40 service considerat i[...]