HP (Hewlett-Packard) CF145ABGJ Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung HP (Hewlett-Packard) CF145ABGJ an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von HP (Hewlett-Packard) CF145ABGJ, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung HP (Hewlett-Packard) CF145ABGJ die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung HP (Hewlett-Packard) CF145ABGJ. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung HP (Hewlett-Packard) CF145ABGJ sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts HP (Hewlett-Packard) CF145ABGJ
- Den Namen des Produzenten und das Produktionsjahr des Geräts HP (Hewlett-Packard) CF145ABGJ
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts HP (Hewlett-Packard) CF145ABGJ
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von HP (Hewlett-Packard) CF145ABGJ zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von HP (Hewlett-Packard) CF145ABGJ und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service HP (Hewlett-Packard) finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von HP (Hewlett-Packard) CF145ABGJ zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts HP (Hewlett-Packard) CF145ABGJ, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von HP (Hewlett-Packard) CF145ABGJ widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    L ASER JET PRO 2 0 0 COLOR M F P Us er Guide M276[...]

  • Seite 2

    [...]

  • Seite 3

    HP LaserJet Pro 200 color MFP M276 Series User Guide[...]

  • Seite 4

    Copyright and License © 2012 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in[...]

  • Seite 5

    Table of contents 1 Product introduc tion ....... ................ .............. .............. .............. ................. ............... ...... .. 1 Product view s .................. .................. ................... .................... ................... .................. . ......... 2 Produ ct front view ........ ................[...]

  • Seite 6

    Print multiple p ages per sheet with Windows ........... ...................... ...................... ....... 26 Select th e page orie ntation (Win dows) ...................................................................... 28 Select th e paper type (Windo ws) .............................................. ................................ 30 Prin[...]

  • Seite 7

    Make multiple copi es ................ ................ ............... ................. ................ ............... ........... .... 53 Copy a multipl e-page origi nal ............ ................ ............... ............... .............. ................. ........ 54 Collate a copy job .. ............ .............. ........... ......[...]

  • Seite 8

    Delete s peed-dial en tries .................. ........................... .............................. ............... 80 Create and edit group-dial e ntries ........... ................... ........................ ................... .... 80 Delete gr oup-dial entrie s ............................... ................................... ........[...]

  • Seite 9

    Use spee d dials and group -dial entries ...................................................................... 97 Send a fax from the software ...... .............. ............... ............. .............. ................ ...... 97 Send a fax by dialing from a telephone connected to the fax line ....................... ........... 99 Send a f[...]

  • Seite 10

    Solve prob lems receiving faxes .. .................. .................. ................... ................. ..... 119 The fax does no t respond .. .................. ...................... .................. ............ 120 The fax has a d edicated phon e line .................. ....................... .. 120 An a nswe ring mach ine i s con nec[...]

  • Seite 11

    Economy settings ...... ................. ................ .................... .................. ................. ................ ... 137 Print with EconoM ode ........................ ........................................ ............................ 137 Set the sleep delay ............. ............... ................. ...................[...]

  • Seite 12

    Black Ve ry Low ......... ....................... ............................ ....................... ... 154 Cleaning ... ............ .............. ............. ............. ............... ............. ............ 155 Cyan Car tridge Low ..... .......................... ............................ .................... 155 Cyan in wrong po[...]

  • Seite 13

    Jam locations ..... ............... .............. ............. ................ ............. ............. ............... 164 Clear jams from the doc u ment feeder ...................................................................... 165 Clear jams in the paper input tray ........ ..................... ....................... .................[...]

  • Seite 14

    Check the sc anner glass fo r dirt and smudges ............... ............................................ 188 Check the s end-fax resolutio n setting ...................................................................... . 189 Check the ima ge adjustment settings ....................................................................... 189 Optimize[...]

  • Seite 15

    Solve produc t software problems w ith Mac OS X .......... ................. .............. ................. ........... 207 The printer drive r is not listed in the Prin t & Fax list .................................... ................ 207 The pro duct n ame d oes n ot ap pear in th e pro duct list in th e Pri nt & F ax li st ...........[...]

  • Seite 16

    xiv ENWW[...]

  • Seite 17

    1 Product introduction ● Product views ● Print product reports ● Printer sharing disclaimer ENWW 1[...]

  • Seite 18

    Product views Product front view 1 Document feeder 2S c a n n e r 3 Output bin 4 Walk-up USB port 5 Power button 6I n p u t t r a y 7 Jam access door 8 Front door 9 Color touchscreen control panel 2 Chapter 1 Prod uct introducti on ENWW[...]

  • Seite 19

    Product back view 1 Rear jam-access door 2 Power connection 3 Fax and telephone ports 4 Hi-Speed USB 2.0 port 5 Network port Serial number and model number location The serial number and product model number labe l is on the back of the p roduct. ENWW Product views 3[...]

  • Seite 20

    Control panel layout 1 Wireless light: indicates th e wireless network is enabled. The li ght blinks whil e the product is establishing a connection to the wireless network. 2 Touchscreen display 3 Attention light: indicates a problem with the product 4 Ready light: indicates the product is ready 5 Help button and light: provides acce s s to the co[...]

  • Seite 21

    NOTE: Depending on the product configuration, the feature s on the Home screen can vary. The layout might also be reversed for some languages. 1 Web Services button: provides quick access to HP Web Services featur es, including HP ePrint HP ePrint is a tool that prints documents by using any email enabled device to send them to the product’s emai[...]

  • Seite 22

    Print product reports From the Reports menu, you can print several info rmative pages about the product. 1. From the Home screen, touch the Setup button. 2. Touch the Reports butto n. 3. Touch the name of the report that you want to print. Menu item Description Demo Page Prints a page that demonstrates print quality Menu Structure Prints a map of t[...]

  • Seite 23

    Printer sharing disclaimer HP does not support pe er-to-peer networ king, as the feature is a function of Mi crosoft operating systems and not of the HP printer drivers. Go to Microsoft at www.mi crosoft.com . ENWW Printer sharing disclaimer 7[...]

  • Seite 24

    8 Chapter 1 Prod uct introducti on ENWW[...]

  • Seite 25

    2 Paper tray ● Supported paper sizes ● Supported paper types ● Load the paper input tray ENWW 9[...]

  • Seite 26

    Supported paper sizes This product supports a nu mber of paper sizes, and it a dapts to various paper. NOTE: To obtain the best print results, select the appropriate pa per size and type in your print driver before printing. Table 2-1 Supported pape r and print media size s Size Dimensions Letter 216 x 279 mm (8.5 x 11 in) Legal 216 x 356 mm (8.5 x[...]

  • Seite 27

    Table 2-2 Supported enve lopes and postcards (conti nued) Size Dimensions Envelope B5 176 x 250 mm (6.7 x 9.8 in) Envelope Monarch 98 x 191 mm (3.9 x 7.5 in) ENWW Supported paper sizes 11[...]

  • Seite 28

    Supported paper types Paper type Dimensions 1 Weight Capacity 2 Paper orientation Paper, including the following types: ● Plain ● Letterhead ● Color ● Preprinted ● Prepunched ● Recycled Minimum: 76 x 127 mm (3 x 5 in) Maximum: 216 x 356 mm (8.5 x 14 in) 60 to 90 g/m 2 (16 to 24 lb) Up to 150 sheets of 75 g/m 2 (20 lb bond) Side to be pr[...]

  • Seite 29

    Load the paper input tray 1. Pull the tray out of the product. 2. Slide open the paper le ngth and width guides. 3. To load Legal-size paper, extend t he tray by pressing and holding the extension tab while pulling the front of th e tray outward. NOTE: When loaded with Legal-size paper, the tray extends from the front of the product approximately 5[...]

  • Seite 30

    4. Place the paper in the tray and make sure that it is flat at all four corners. Slide the paper length and width gu ides so that they are against the stack of paper. NOTE: The tray capacity is 150 sheets. 5. Push down on the paper to make sure that t he paper stack is below th e pa per limit tabs on the side of the tray. 6. Slide the tray into th[...]

  • Seite 31

    3P r i n t ● Supported printer drivers (Windows) ● Change print-job settings (W indows) ● Change print-job settings (Mac OS X) ● Print tasks for Windows ● Print tasks for Mac OS X ● Additional prin t tasks (Windows) ● Additional prin t tasks (Mac OS X) ● Create archival-quality prints ● Color printing ● Use HP ePrint ● Use Air[...]

  • Seite 32

    Supported printer drivers (Windows) Printer drivers provide access to the product featur es and allow the computer to communicate with the product (using a printer l anguage). Check the installation notes and re adme files on the product CD for additional software and languages. HP PCL 6 driver description ● Installs automatically when installing[...]

  • Seite 33

    Change print-job settings (Windows) Priority for changing print-job settings Changes to print settings are prioritized depending on whe re the chan ges are made: NOTE: The names of comm ands and dialog boxe s might vary depending on your software program. ● Page Setup dialog box : Click Page Setup or a similar command on the File menu of the prog[...]

  • Seite 34

    Change the product configuration settings 1. Windows XP, Windows Server 2003, and Windows Server 2008 (using the default Start menu view) : Clic k Start , and then click Printers and Faxes . Windows XP, Windows Server 2003, and Windows Server 2008 (using the Classic Start menu view) : Click Start , click Settings , and then click Printers . Windows[...]

  • Seite 35

    Change print-job settings (Mac OS X) Priority for changing print-job settings Changes to print settings are prioritized depending on whe re the chan ges are made: NOTE: The names of comm ands and dialog boxe s might vary depending on your software program. ● Page Setup dialog box : Click Page Setup or a similar command on the File menu of the pro[...]

  • Seite 36

    4. Click the Dri ver tab. 5. Configure the installed options. 20 Chapter 3 Pr int ENWW[...]

  • Seite 37

    Print tasks for Windows Use a printing shortcut (Windows) 1. From the software program, select the Print option. 2. Select th e product, a nd then click the Properties or Preferences button. ENWW Print tasks for Windows 21[...]

  • Seite 38

    3. Click the Printing Shortcuts tab. 4. Select one of the shortcuts, and then click the OK button. NOTE: When you select a shortcut, the corresponding settings change on the other tabs in the printer driver. Create a printing shortcut (Windows) 1. From the software program, select the Print option. 22 Chapter 3 Pr int ENWW[...]

  • Seite 39

    2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Printing Shortcuts tab. 4. Select an existing shortc ut as a base. NOTE: Always select a shortcut before adjusting any of the settings on the right side of the screen. If you adjust the settings and then select a shortcut, or if you select a different shortcu[...]

  • Seite 40

    5. Select the print option s for the new shortcut. NOTE: You can select the print options on this tab or on any other tab in the printer driver. After selecting options on other tabs, return to the Printing Shortcuts tab before continuing with the next step. 6. Click the Save As button. 7. Type a name for the shortcut, and click the OK button. 24 C[...]

  • Seite 41

    Print on both sides (d uplex) with Windows 1. On the File menu in the software program, click Print . 2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Finishing tab. ENWW Print tasks for Windows 25[...]

  • Seite 42

    4. Select the Print on both sides (manually) check box. Click the OK button to print the first side of the job. 5. Retrieve the printed stack from the output bin, and maintaining the same orientation, place it with the printed-side facing down in the input tray. 6. On the control panel, press the OK button to print the second side of the job. Print[...]

  • Seite 43

    2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Finishing tab. ENWW Print tasks for Windows 27[...]

  • Seite 44

    4. Select the number of pa ges per sheet from the Pages per sheet drop-dow n list. 5. Select the corre ct Print page borders , Page order , and Orientation options. Select the page orientation (Windows) 1. From the software program, select the Print option. 28 Chapter 3 Pr int ENWW[...]

  • Seite 45

    2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Finishing tab. 4. In the Orientation area, select the Portrait or Landscape option. To print the page im age upside down, selec t the Rotate by 180 degrees op tion. ENWW Print tasks for Windows 29[...]

  • Seite 46

    Select the paper type (Windows) 1. From the software program, select the Print option. 2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Paper/Quality tab. 4. From the Paper type drop-down list, click the More... option. 30 Chapter 3 Pr int ENWW[...]

  • Seite 47

    5. Select the category of paper types that best describes your paper. 6. Select the option for the type o f paper you are using, and click the OK button. Print the first or last page on different paper (Windows) 1. From the software program, select the Print option. ENWW Print tasks for Windows 31[...]

  • Seite 48

    2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Paper/Quality tab. 4. Click the Print pages on different paper check box, and then select the necessary settings for the front cover, other pages, and back cover. 32 Chapter 3 Pr int ENWW[...]

  • Seite 49

    Scale a document to fit page size (Windows) 1. From the software program, select the Print option. 2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Effects tab. 4. Select the Print document on option, and then select a size from the drop-down list. ENWW Print tasks for Windows 33[...]

  • Seite 50

    Create a booklet (Windows) 1. From the software program, select the Print option. 2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Finishing tab. 34 Chapter 3 Pr int ENWW[...]

  • Seite 51

    4. Click the Print on both sides (manually) check box. 5. In the Booklet layout drop-down li st, select a binding option. The Pages per sheet option automatically changes to 2 pages per sheet . ENWW Print tasks for Windows 35[...]

  • Seite 52

    Print tasks for Mac OS X Use a printing preset (Mac OS X) 1. On the File menu, click the Print option. 2. In the Printer menu, select this product. 3. In the Presets menu, select the printing preset. NOTE: To use printer-driver defa ult settin gs, select the standard option. Create a printing preset (Mac OS X) Use printing presets to save the curre[...]

  • Seite 53

    Print multiple pages on on e sheet of paper (Mac OS X) 1. On the File menu, click the Print option. 2. In the Printer menu, select this product. 3. Open the Layout menu. 4. From the Pages per Sheet menu, select the number of p age s that you want to print on each sheet (1, 2, 4, 6, 9, or 16). 5. In the Layout Direction area, select the order and pl[...]

  • Seite 54

    Print a cover page (Mac OS X) 1. On the File menu, click the Print option. 2. In the Printer menu, select this product. 3. Open the Cover Page menu, and then select where to pr int the cover page. Click either the Before Document button or the After Document button. 4. In the Cover Page Type menu, select the message that you want to print on the co[...]

  • Seite 55

    Additional print tasks (Windows) Cancel a print job (Windows) 1. If the print job is currently printing, cancel it by pressing the Cancel button on the product control panel. NOTE: Pressing the Cancel button clears the job t hat the product is currently processi ng. If more than one process is ru nning, pressing the Cancel button clears the process[...]

  • Seite 56

    5. Type a name for the c ustom size and specify t he dimensions. ● The width is the short edge of the paper. ● The length is the long edge of the paper. NOTE: Always load pape r into th e trays short edge first. 6. Click the Save button, and then click the Close button. Print watermarks (Windows) 1. From the software program, select the Print o[...]

  • Seite 57

    Additional print tasks (Mac OS X) Cancel a print job (Mac OS X) 1. If the print job is currently printing, cancel it by pressing the Cancel button on the product control panel. NOTE: Pressing the Cancel button clears the job t hat the product is currently processi ng. If more than one print job is waiting, pressing the Cancel button clears the prin[...]

  • Seite 58

    5. From the Pages menu, select whether to print the wate rmark on al l pages or on the first page only. 6. From the Text menu, selec t one of the standard messages, or select the Custom option and type a new message in the box. 7. Select options for the remaining settings. Create archival-quality prints Archive print produces output that is less su[...]

  • Seite 59

    Color printing Use the HP EasyColor option If you are using the HP PCL 6 printer driver for Windows, the HP EasyColor technology automatically improves mixed-content documents that are printed from M icrosoft Office p rograms. This te chnology scans documents and automatically adjusts phot ographic images in .JPEG or .PNG format. HP EasyC olor tech[...]

  • Seite 60

    Change color options (Windows) 1. From the software program, select the Print option. 2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Color tab. 4. Click the Automatic or Manual setting. ● Automatic setting: Select this setting for most color print jobs. ● Manual setting: Select this setting to adjust [...]

  • Seite 61

    2. Select th e product, a nd then click the Properties or Preferences button. 3. Click the Color tab. 4. Select a color theme fro m the Color Themes drop-dow n list. ● Default (sRGB) : This theme sets the product to print RGB data in raw device mode. When using this theme, manage color in the software program or in the operating system for correc[...]

  • Seite 62

    Manual color options Use manual color options to adjust the Neutral Grays , Halftone , and Edge Control options for text, graphics, and photographs. Table 3-1 Manual color options Setting description Setting options Edge Control The Edge Control setting determines the rendering of edges. Edge control has two components: adaptive halftoning and trap[...]

  • Seite 63

    ● Software programs ● Printer drivers ● Computer operating systems ● Monitors ● Video cards an d drivers ● Operating environment (humidity, for example) Keep these factors in mind when colors on your screen do not perfectly ma tch your printed colors. Print colored text as black (Windows) 1. From the software program, select the Print o[...]

  • Seite 64

    Use HP ePrint 1. To use HP ePrint, you must first enable HP Web Services. a. From the Home screen, touch the Web Services button. b. Touch the Enable Web Se rvices button. Upon enabling Web Services, the product will print an information sheet that includes the printer code and ins tructions to sign up at www.hpeprintcenter.com . 2. Once you have r[...]

  • Seite 65

    Use AirPrint Direct printing using Apple’s AirPrint is supported for iOS 4.2 or later. Use AirPrint to print directly to the product from an iPad ( iOS 4.2), iPhone (3GS or later), or iPod touch (third generation or later) in the following applications: ● Mail ● Photos ● Safari ● Select third-party applica tions To use AirPrint, the produ[...]

  • Seite 66

    Walk-up USB printing 1. Insert the USB drive into the USB port on the front of the product. 2. The USB Flash Drive menu opens. Touch the arrow buttons to scroll through the options. ● Print Documents ● View and Print Photos ● Scan to USB Drive 3. To print a docume nt, touch the Print Documents screen, and then touch the name of the folder on [...]

  • Seite 67

    4 Copy ● Make a single copy ● Make multiple copies ● Copy a multiple-page original ● Collate a copy job ● Copy on both sides (d uplex) ● Reduce or enlarge a copy ● Make color or black and white co pies ● Copy identification cards ● Optimize copy quality ● Adjust the lightness or darkness for copies ● Adjust the copy image ● [...]

  • Seite 68

    Make a single copy 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Copy button. 3. Touch the Bl ack or Color but ton to start copying. 52 Chapter 4 Copy ENWW[...]

  • Seite 69

    Make multiple copies 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Copy button. 3. Touch the arrows to chan ge the number of copies, o r touc h the existing number and type the number of copies. 4. Touch the Bl ack or Color but ton to start copying. ENWW Make multiple copies 53[...]

  • Seite 70

    Copy a multiple-page original 1. Insert the originals into the documen t feeder face-up. 2. Adjust the guides until they are snug against the paper. 3. From the Home screen, touch the Copy button. 4. Touch the Bl ack or Color but ton to start copying. 54 Chapter 4 Copy ENWW[...]

  • Seite 71

    Collate a copy job 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Copy button. 3. Touch the Settings button, and then scroll to and touch the Collation button. Touch the arrow buttons to scroll through the options, and then touch an option t o select it. 4. Touch the Black or Color button[...]

  • Seite 72

    Copy on both sides (duplex) 1. Load the first page of the document onto the scanner glass or into the document fe eder. 2. From the Home screen, touch the Copy button. 3. Touch the Black or Color button to start copying. 4. Remove the printed copy from the output bin, and load the pages into Tray 1 with the printed side down and the top ed ge at th[...]

  • Seite 73

    5. Load the next page of the document onto the scanner glass or into the document fe eder. 6. From the Home screen, touch the Copy button. 7. Touch the Black or Color button to start copying. 8. Repeat these steps un til the copy is complete. ENWW Copy on both sides (duplex) 57[...]

  • Seite 74

    Reduce or enlarge a copy 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Copy button. 3. Touch the Settings button, and then touch the Reduce/Enlarge button. To uch the arrow buttons to scroll through the options, and then touch an option to select it. 4. Touch the Black or Color button to[...]

  • Seite 75

    Make color or black and white copies 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Copy button. 3. Touch the Bl ack or Color but ton to start copying. ENWW Make color or black and white copies 59[...]

  • Seite 76

    Copy identification cards Use the ID Copy feature to copy bo th sides of identification c ards, or other small- size documents, onto the same side of one s heet of paper. The product pr ompts you to copy the first side and then to place the second side on a different area of the sca nner glass and copy again. The product pr ints both images at the [...]

  • Seite 77

    Optimize copy quality The following co py-quality settings are av ailable: ● Auto Select : Use this setting when you are not concerned about the quality of the copy. This is the default setting. ● Mixed : Use this setting for documents that contain a mixture of text and graphics. ● Text : Use this setting for docume nts that contain mostly te[...]

  • Seite 78

    Adjust the lightness or darkness for copies 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Copy button. 3. On the summary screen, touch the arrow buttons to adjust the setting. 4. Touch the Black or Color button to start copying. 62 Chapter 4 Copy ENWW[...]

  • Seite 79

    Adjust the copy image 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Copy button. 3. Touch the Settings button. 4. Scroll to and touch the Image Adjustment button. 5. Touch the name of the setting you want to adjust. ● Lightness : Adjusts the lightness/darkness setting. ● Contrast : A[...]

  • Seite 80

    Copy in draft mode Using draft mode can use less tone r. Howeve r, using draft mode can also reduce p rint quality. HP does not recommend the full-time use of draft mode. If draft mode is used full-time, the toner supply might outlast the mechanical parts in the toner cartridge. If print qu ality begins to degrade and is no longer acceptable, consi[...]

  • Seite 81

    Set the paper size and type for copying on special paper 1. From the Home screen, touch the Copy button. 2. Touch the Settings button, and then scroll to and touch the Paper button. 3. From the list of paper sizes, touch the name of the paper size that is in Tray 1. 4. From the list of paper types, touch the name of the paper type that is in Tray 1[...]

  • Seite 82

    Set new default copy settings You can save any combination of copy settings as the default settings to use for every job. 1. From the Home screen, touch the Copy button. 2. Touch the Settings button. 3. Configure the copy settings to meet your preferences, and then scroll to and touch the Set as New Defaults button. 4. Touch the Yes button. 66 Chap[...]

  • Seite 83

    Restore copy default settings Use this procedure t o restore th e factory de faul t copy settings. 1. From the Home screen, touch the Copy button. 2. Touch the Settings button. 3. Scroll to and touch the Restore Defaul ts button. 4. Touch the OK button to restore the defaults. ENWW Restore copy default settings 67[...]

  • Seite 84

    68 Chapter 4 Copy ENWW[...]

  • Seite 85

    5S c a n ● Scan by using the HP Scan soft ware (Windows) ● Scan by using the HP Sc an software (Mac OS X) ● Scan to a USB flash drive ● Scan to a network folder ● Scan to email ● Scan by using other software ENWW 69[...]

  • Seite 86

    Scan by using the HP Scan software (Windows) 1. Double-click the HP Scan icon on the computer desk top. 2. Select a scanning shortc ut, and adjust the settings if necessary. 3. Click Scan . NOTE: Click Advanced Settings to gain access to more options. Click Create New Shortcut to create a customized se t of settings and save it in the list of short[...]

  • Seite 87

    Scan to a USB flash drive 1. Load the document onto the scanner glass or into the document feeder. 2. Insert a USB flash drive into the port on the front of the product. 3. From the Home screen, touch the Scan button. 4. Touch the Scan to USB Drive screen. 5. Touch the Scan button to scan and save the f ile. The product creates a folder named HP on[...]

  • Seite 88

    Scan to a network folder Use the product control panel to scan a file to a folder on the netw ork. The product must be connected to a network in or der to use this feature. 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Scan button. 3. Touch the Scan to Network Folder item. 4. In the list[...]

  • Seite 89

    Scan to email Use the product control panel to scan a file directly to an email address. The scanned file is sent to the address as an email message attach ment. The product must be connected to a network in order to use this feature. 1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Scan bu[...]

  • Seite 90

    Scan by using other software The product is TWAIN-complia nt and Windows Imag ing Application (WIA)-compliant. The product works with Windows-based programs that supp ort TWAIN-compliant or WIA-compliant scanning devices and with Macintosh-base d programs t hat support TWAIN-compliant scanning devices. While you are in a TWAIN-compliant or WIA-comp[...]

  • Seite 91

    6F a x ● Connect fax to a telephone line ● Set up fax with a telephone answering machine ● Set up fax with an extension phone ● Setup for stand-alone fax ● Configure the fax time, date, and header ● Use special cha racters in fax headers ● Use the phone bo ok ● Configure send fax settings ● Configure receive fax settings ● Set f[...]

  • Seite 92

    Connect fax to a telephone line ▲ Connect the telephone cable to the line port on the product and to the telephone jack on the wall. The product is an analog device. HP recommends us ing the product on a dedicated analog telephone line. NOTE: Some countries/regions might require an adapte r to the phone co rd that came with the product. Set up fa[...]

  • Seite 93

    Configure the fax time, date, and header Use the control panel To use the control panel to set the date, ti me, and header, c omplete the following steps: 1. From the Home screen, touch the Setup button. 2. Touch the Fax Setup menu. 3. Touch the Basic Se tup menu. 4. Scroll to and touch the Time/Date button. 5. Select the 12-h our clock or 24-hou r[...]

  • Seite 94

    Use the phone book You can store frequently dialed fax numbers (up to 12 0 entries) either as indi vidual fax numbers or as groups of fax numbers. Use the control panel to create and edit the fax phone book 1. From the Home screen, touch the Fax button. 2. Touch the Fax Menu button. 3. Touch the Phone Book Setup button. 4. Touch the Individual Setu[...]

  • Seite 95

    HP Device Tool box can import contact informatio n from the following software program phone books. ● Microsoft O utlook ● Lotus Notes ● Microsoft O utlook Express ● A phone book pre viously exported fro m an other HP product's ToolboxFX software. Delete phone book entries You can delete all phone book entries that are progra mmed in t[...]

  • Seite 96

    Create and edit speed-dial entries 1. From the Home screen, touch the Fax button. 2. Touch the Fax Menu button. 3. Touch the Phone Book Setup button. 4. Touch the Individual Setup button. 5. Touch an unassigned number from the list. 6. Use the keypad to enter a name for th e entry, and then touch the OK bu tton. 7. Use the keypad to enter the fax n[...]

  • Seite 97

    d. Touch the Individual Setup button. e. Touch an unassigned numb er from the list. f. Use the keypad to enter a name for the entry, and then touch the OK button. g. Use the keypad to enter the fax number for the entry, and then touch the OK button. 2. From the Phone Book Setup menu, touch the Group Setup button. 3. Touch an unassigned number from [...]

  • Seite 98

    Configure send fax settings Set special dialing symb ols and options You can insert pauses into a fax number that you are dialing. Pauses are often needed when dialing internationally or connecting to an outside line. Special symbol Button Description Dialing pause The Redial/Pause button is availabl e on the control panel keypad for entering a fax[...]

  • Seite 99

    The factory-set default fo r detect dial tone is On for France and Hungary, and Off for all other countries/regions. 1. From the Home screen, touch the Setup button. 2. Touch the Fax Setup menu. 3. Touch the Advan ced Setup menu. 4. Scroll to and touch the Det ect Dial Tone button, and then touch the On but ton. Tone dial or pulse dial Use this pro[...]

  • Seite 100

    3. Touch the Advan ced Setup menu. 4. Scroll to and touch the Redial if No Answer button, and then touch the On button. Set the redial-on-commu nication-err or option If this option is on, the product redials autom atically if some sort of communication error occurs. The factory-set default for the redial -on-communication-error option is On . 1. F[...]

  • Seite 101

    Set the default resolution setting 1. From the Home screen, touch the Setup button. 2. Touch the Fax Setup menu. 3. Touch the Advan ced Setup menu. 4. Touch the Fax Resolution button, and then touch one of the options. Cover page templates Several business and personal fa x cover-page templates are availa ble in the PC Fax Send software program. NO[...]

  • Seite 102

    NOTE: After the product prints this repo rt, it de letes all billing data. 1. From the Home screen, touch the Fax button. 2. Touch the Fax Me nu button. 3. Touch the Fax Repor ts button. 4. Scroll to and touch the Print Billing Report button. 86 Chapter 6 F ax ENWW[...]

  • Seite 103

    Configure receive fax settings Set fax forwarding You can set your product to forw ard incoming faxes to another fax number. When the fax arrives at your product, it is stored in the memory. The produc t then dials the fax number that you have specified and sends the fax. If the product cannot f orward a fax beca use of an error (f or example, the [...]

  • Seite 104

    Block or unblock fax numbers If you do no t want to receive faxes from specif ic people or businesse s, you can block a s many as 30 fax numbers by using the contro l panel. When you block a fax number and someone from that number sends you a fax, the control-panel display indicates th at the number is blocked, the fax does not print, and the fax i[...]

  • Seite 105

    Type of telephon e line Recommended rings-to-answer setting Shared line (receiving both fax and vo ice calls) with only an attached telephone Five rings or more. Shared line (receiving both fax and vo ice calls) with an attached answering machine or compu ter voicemail Two rings more than the answering machine or compu ter voicemail. To set or chan[...]

  • Seite 106

    Use autoreduction for incom ing faxes If the fit-to-page option is turned on, the product automatically reduce s long faxes up to 75% to fit the information on the default paper size (for example, the fax is reduced from legal to letter size). If the fit-to-page option is turned off, long faxes print at full size on multiple pages. The factory-set [...]

  • Seite 107

    Set stamp-received faxes The product prints the sender iden ti fication information at the top of ea ch received fax. You can also stamp the incoming fax with your own header inform ation to confirm the date and time that the fax was received. The factory-set default for stamp-r eceived faxes is Off . NOTE: Turning on the stamp-received setting mig[...]

  • Seite 108

    4. Touch the Po lling Receive button. 5. Use the keypad to enter the number of the fax mach ine that you want to poll, and then touch the OK button. The product dials the other fax machine and requests the fax. 92 Chapter 6 F ax ENWW[...]

  • Seite 109

    Use fax Supported fax programs The PC fax program that came with the product is th e only PC fax program that works with the product. To continue to use a PC fax program previously installed on the computer, use the modem that is already connected to the computer; it wi ll not function through the product modem. Cancel a fax Use these instructions [...]

  • Seite 110

    3. Touch the Fax Se rvice menu. 4. Touch the Cl ear Saved Faxes button. Use fax on a DSL, PBX, or ISDN system HP products are designed specifically for use wi th traditional analog phone services. They are not designed to work on DSL, PBX, IS DN lines, or VoIP serv ices, but they work wit h the proper setup and equipment. NOTE: HP recomme nds discu[...]

  • Seite 111

    Use fax on a VoIP service Voice over internet protoco l (VoIP) services are of ten not compatible with fax machines unless the provider explicitly states that it supports fax over IP services. If the product experiences pr oblems getting a fax to work on a VoIP network, verify that all cables and settings are correct. Decrea sing the fax-speed sett[...]

  • Seite 112

    7. The product scans the first page and then prompts you to load another page. If the document has multiple pages, touch the Yes button. Continue this process until you have scanned all the page s. 8. When you have scanned the last page, touch the No button at the p rompt. The product sends the fax. Fax from the document feeder 1. Insert the origin[...]

  • Seite 113

    Use speed dials and group-dial entries 1. Load the document into the document feeder or onto the scanner glass. 2. From the Home screen, touch the Fax button. 3. On the keypad, touch the fax phone book icon. 4. Touch the name o f the individual or group entry that you want to use. 5. Touch the Start Fax button. Send a fax from the software The foll[...]

  • Seite 114

    4. Load the doc ument in the document feed er. 5. Click Send Now . Send a fax from a third-party softwa re program, such as Mic rosoft Word 1. Open a docume nt in a third-party pr ogram. 2. Click the File menu, and then click Print . 3. Select the fax print driver from the printer driver drop-down list. The fax software opens. 4. Enter the fax numb[...]

  • Seite 115

    Send a fax by dialing from a te lephone connected to the fax line Occasionally, you might want to dial a fax number from a telephone th at is connected to the same line as the product. For example, if you are sending a fax to a person whose device is in the manual receive mode, you can preced e the fax with a voice call to let that person know that[...]

  • Seite 116

    1. Load the document into the doc ument feeder. 2. From the Home screen, touch the Fax button. 3. Touch the Fax Menu button. 4. Touch the Send Options button. 5. Touch the Send Fax L ater button. 6. Use the keypad to ente r the time of day to send the fax. Touch the OK button. 7. Use the keypad to enter the date to send the fax. Touch the OK button[...]

  • Seite 117

    Print a fax When the product receives a fax transmission, it pr ints the fax (unless the private-receive feature is enabled) and also stores it aut omatically to flash memory. When a color to ner cartridge becomes very low, th e product prints in black only to prevent fax interruptions. To configure the product to print in color and use the remaini[...]

  • Seite 118

    Reprint a fax When the Allow Fax Reprint feature is on, the product stores re ceived faxes in memory. The product has about 3.2 MB of storag e spac e, which holds about 250 pages. These faxes are stored continuously. Re printing them does not clear them from the memory. Turn on the Allow Fax Reprint feature 1. From the Home screen, touch the Setup [...]

  • Seite 119

    4. Touch the Pr int Private Faxes button. 5. Use the keypad to enter the product se curity password, and then touch the OK button. ENWW Use fax 103[...]

  • Seite 120

    Solve fax problems Fax troubleshooting checklist ● Several possible fixes are avail able. After each recommended acti on, retry faxing to see if the problem is resolved. ● For best results during fax problem solving, make sure the line from the product is plugged directly into the wall phone port. Disconnect all othe r devices that are connecte[...]

  • Seite 121

    4. Click the link for your operating system. 5. Scroll to the Firmware section of the table. ◦ If the listed version matches the version on the configuration page, you have the most current version. ◦ If the versions are different, do wnlo ad the firmware upgrade and update the firmware on the product following the instructions onscreen. NOTE: [...]

  • Seite 122

    Fax trace report A fax T.30 trace report has inform ation that can help resolve fax tr ansmission pro blems. If you call HP for help in resolving these problems, pr int a T.30 trace r eport before you call. 1. From the Home screen, touch the Setup button. 2. Touch the Service menu. 3. Touch the Fax Se rvice menu. 4. Touch the Print T.30 Trace butto[...]

  • Seite 123

    Fax error report printing Use the following instructions to print fax l ogs and reports: Print all fax reports Use this procedure to print all of the following reports at one time: ● Last Call Report ● Fax Activity Log ● Phone Book Report ● Junk Fax List ● Billing Report (when Billing Codes are turned on) ● Configuration Report ● Usag[...]

  • Seite 124

    NOTE: With this option, you will have no indication that a fax failed to be transmitted unless you print a fax activity log. 1. From the Home screen, touch the Fax button. 2. Touch the Fax Me nu button. 3. Touch the Fax Repor ts button. 4. Touch the Fax Error Report button, and then touch the printing option that you want to use. Set the fax-error-[...]

  • Seite 125

    warning message is related to prin ting and the auto-continue feature is on, the product will attempt to resume printing the job after th e warning has ap peared for 10 seconds without acknowledgement. Control panel message Description Recommended action Communicatio n error. A fax communication error occ urred between the product and the sender or[...]

  • Seite 126

    Control panel message Description Recommended action Fax is busy. Redial pending. The fax line to which yo u were sending a fax was busy. The product automatically redials the busy number. Allow the product to retry sending the fax. Call the recipient to ensure that the fax machine is on and ready. Check that you are dialing the correct fax number.[...]

  • Seite 127

    Control panel message Description Recommended action Fax Send erro r. An error occurred while trying to send a fax. Try resending the fax. Try faxing to an other fax number. Check for a dial tone on the phone line by touching the Start Fax button. Check that the telephone cord is secu rely connected by unplugging and replugging the cord. Make sure [...]

  • Seite 128

    Control panel message Description Recommended action No dial tone. The product could not detect a dial tone. C he ck for a dial tone on the phone line by touching the Start Fax button. Unplug the telephone cord from both the product and the wall, and then replug the cord. Make sure that you are using th e telephone cord that came with the product. [...]

  • Seite 129

    Control panel message Description Recommended action No fax answer. Redial pending. The receiving fax line did not answer. The product attempts to redial after a few minutes. Allow the product to retry sending the fax. Call the recipient to ensure that the fax machine is on and ready. Check that you are dialing the correct fax number. If the produ [...]

  • Seite 130

    ● Receive a recorded error message f rom the phone company when trying to send a fax ● Unable to send a fax when a p hone is connected to the product An error message displays on the control panel The Communication error. m essage appears ● Allow the product to retry sending the fax. Re-sending temporarily reduces the fax speed. ● Unplug th[...]

  • Seite 131

    ● Unplug the telephone cord from both the prod uct and the wall, and then replug the cord. ● Make sure that you are using the teleph one cord that cam e with the product. ● Plug the product phone cord into a jack for another phone line. ● Check the phone line by using the Run Fax Test option from the Service menu on the control panel. a. Fr[...]

  • Seite 132

    ● Check the phone line by using the Run Fax Test option from the Service menu on the control panel. a. From the Home screen, touch the Setup button. b. Open the Service menu. c. Open the Fax Service menu. d. Select the Run Fax Test item. ● If the error pers ists, contact HP. See www.hp.com/ support/ ljcolorm276ser ies or the support flyer that [...]

  • Seite 133

    The control panel displays a Ready message with no attempt to send the f ax ● Check the fax activi ty log for e rrors. a. Touch the Fax button, and then touch the Fax Menu button. b. Open the Fax Reports menu. c. Open the Fax Activity Log menu . d. Select the Print Log Now option. ● If a phone is connected to the product, make sure that the pho[...]

  • Seite 134

    Unable to use fax functions from the control panel ● The product might be password protected. Us e the HP Embedded Web Server, HP Toolb ox software, or the control panel to set a password. ● If you do not know the password for the pr oduct, contact your system administrator. ● Verify with the system administrator that the fax functionality ha[...]

  • Seite 135

    Receive a recorded error message from the phone compan y when trying to send a fax ● Make sure you dial the fax number correctly, and make sure that the phone service is not blocked. For example, some phone services might prevent long distance calling. ● If an outside line requir es a prefix, turn on the Dial Prefix option or inclu de the prefi[...]

  • Seite 136

    The fax does not respond The fax has a dedi cated phone line ● Set the Answer Mode option to the Automatic setting from the control panel. a. From the Home screen, touch the Setup button. b. Open the Fax Setup menu. c. Open the Basic Setup menu. d. Open the Answer Mode menu. e. Select the Automatic setting. An answering machine is connected to th[...]

  • Seite 137

    d. Open the Answer Mode menu. e. Select the Fax/Tel setting. A telephone handset is co nnected to the product Set the Answer Mode option to the Automatic setting. 1. From the Home screen, touch the Setup button. 2. Open the Fax Setup menu. 3. Open the Basic Setup menu. 4. Open the Answer Mode menu. 5. Select the Automatic setting. The Answer Mode s[...]

  • Seite 138

    The prod uct is conne cted to a DSL ph one service ● Check the installation and features. A DSL modem requires a high-pass fi lter on the phone line connection to the product. Cont act your DSL service provider for a filter o r buy a filter. ● Verify that the filter is plugged in. ● Replace the existing filter to make sure that it is not defe[...]

  • Seite 139

    The Communication error. m essage appears ● Ask the sender to send the fax again or send at a later time when line co nditions have improved. ● Unplug the product teleph one cord from the wall, plug in a te lephone, and then try making a call. Plug the product phone cord into a jack for another phone line. ● Try a different phone cord. ● Se[...]

  • Seite 140

    ● Make sure that the resolution of the sending fax machine is not set to the Photo setting or the Superfine setting. a. From the Home screen, touch the Setup button. b. Open the Fax Setup menu. c. Open the Advanced Setup menu. d. Open the Fax Resolution menu. e. Select the correct setting. ● Cancel all fax jobs or cl ear the faxes from memory. [...]

  • Seite 141

    Set the Answer Mode option to the Fax/Tel setting to automatically receive faxes. The Fax/ Tel setting automatically detects whether the inco ming transmission is a fax or a voice call and routes the call to the appropriate device. A phone line splitter is being used ● If you are using a pho ne line splitter, remove the splitter and set up the ph[...]

  • Seite 142

    ● Increase the Fax Speed setting. a. Open the Setup Menu menu. b. Open the Fax Setup menu. c. Open the Advanced Setup menu. d. Open the Fax Speed menu . e. Select the correct setting. ● Divide large fax jo bs into smaller sect ions, and then fax them individually. ● Change the fax settings on the cont rol panel to a lower resolution. a. Open [...]

  • Seite 143

    ● Check the toner ca rtridges and replace if necessary. ● Ask the sender to dark en the cont rast setting on the sending fax machine, and then resend the fax. Fax cuts off or pr ints on two pages ● Set the Default Paper Size setting. Faxes print on a single size of paper based on the Default Paper Size settings. a. Open the Setup Menu menu. b[...]

  • Seite 144

    128 Chapter 6 Fax ENWW[...]

  • Seite 145

    7 Manage and maintain ● Use the HP Reconfiguration Utility to change the product connect ion ● Use HP Web Services applications ● Configure IP network settings ● HP Device Toolbox (Windows) ● HP Utility (Mac OS X) ● HP Web Jetadmin ● Product security features ● Economy settings ● Print when a toner cartridge is at estimated end of[...]

  • Seite 146

    Use the HP Reconfiguration Utility to change the product connection If you are already using the prod uct and you wish to change the way it is connected, use the HP Reconfiguration Utility to set up the connection. For exampl e, you can reconfigu re the product to use a different wireless address, to co nnect to a wired or wireless netw ork, or cha[...]

  • Seite 147

    Configure IP network settings View or change network settings Use the HP Device To olbox to view or change IP configuration settings. 1. Print a configuration page, and loc ate the IP address. ● If you are using IPv4, the IP address contains only digits. It has this format: xxx.xxx.xxx.xxx ● If you are using IPv6, the IP address is a hexa decim[...]

  • Seite 148

    3. On the Device Inf ormation page, the default product name is in the Device Status field. You can change this name to uniquely identify this product. NOTE: Completing the other fields o n this page is optional. 4. Click the Apply button to save the changes. Link speed and duplex settings NOTE: This information applies only to Ethernet netw orks. [...]

  • Seite 149

    HP Device Toolbox (Windows) Use the HP Device Toolbox for Windows to view or change product settings from your computer. This tool opens the HP Embedded Web Server for the prod uct. NOTE: This tool is available only if you performed a full installation when you installed the product. 1. Click the Start butto n, and then click the Programs item. 2. [...]

  • Seite 150

    Tab or section Description System tab Provides the ability to configure the product from your computer . ● Device Information : Provides basic product and company information. ● Paper Setup : Allows you to change the paper-handling defaults for the product. ● Print Quality : Allows you to change the print quality defaults for the product, inc[...]

  • Seite 151

    HP Utility (Mac OS X) Use the HP Utility for Mac OS X to view or change pr oduct settings from your computer. This tool opens the HP Embedded Web Server for the product. You can use the HP Utility when the product is c onnected with a USB ca ble or is connected to a TCP/IP- based network. Open the HP Utility ▲ From the dock, click HP Utility . -o[...]

  • Seite 152

    HP Web Jetadmin HP Web Jetadmin is an award-winni ng, industry-lea ding tool for effi ciently managing a wide variety of networked HP devices, including printers, multifunction products, and digital senders. This single solution allows you to remotely install, monitor, maintain, troubleshoot, and secure your printing and imaging environment — ult[...]

  • Seite 153

    Economy settings Print with EconoMode This product has an EconoMode option for printing drafts of documents. Us ing EconoMode can use less toner. However, using EconoMode can also reduce print quality. HP does not recommend the full-time use of EconoM ode. If EconoMode is used full-time, the toner supply mi ght outlas t the mechanical parts in the [...]

  • Seite 154

    3. Select the time for the power-down delay. NOTE: The default value is 30 minu tes. 4. The product automatically wakes fr om the auto power-do wn mode when it receives jobs or when you use a button on the control panel. You can ch ange which events cause the produ ct to wake. Open the following menus: ● System Setup ● Energy Settings ● Auto [...]

  • Seite 155

    Print when a toner cartridge is at estimated end of life Supply-related notifications ar e communicated on th e product control panel, Desktop Alerts, software applications, and network alerts. A <Supply> Low message—wher e <Supply> is the color to ner cartridge : The product indicate s when a supply level is low. Actual cartridge lif[...]

  • Seite 156

    prompt and continue printing. The customer ca n choose to be prompted in 100 pages, 200 pages, 300 pages, 400 p ages, or never. The defa ult setting is to prompt in 100 pages. This option is provided as a customer convenience and is not an indica tion these pages will have acceptable print quality. ● On the Color Cartridges menu only, select Prin[...]

  • Seite 157

    Replacement instructions Replace the toner cartridges 1. Open the front door. 2. Pull out the toner cartridge draw er. ENWW Replacemen t instructions 141[...]

  • Seite 158

    3. Grasp the handle on the toner cartridge, and then pull the toner cartridge straight up to remove it. 4. Remove the new toner cartridge from the packaging. 5. Gently rock the toner cartri dge from front to back to distribute the toner evenly inside the cartridge. 142 Chapter 7 Manage and maintain ENWW[...]

  • Seite 159

    6. Remove the plastic shield from the bottom of the new toner cartridge. 7. Do not touch the imaging drum on the bottom of the toner cartridge. Fingerprints on the imaging drum can cause print-quality problems. 8. Insert the new toner cartridge into the product. ENWW Replacemen t instructions 143[...]

  • Seite 160

    9. Pull the tab on the left side of the toner cartridge straight up to completely remove the sealing tape. Discard the sealing tap e. 10. Close the toner cartridge drawe r. 11. Close the front do or. 12. Place the old toner cart ridge and the plastic shield in the box for the new toner cartridge. Follow the recycling instructions that are included [...]

  • Seite 161

    Update the firmware HP offers periodic upgrades to the pro duct firm ware. You can load the fir mware updates manually, or you can set the product to automa tically load firmware updates. Manually update the firmware 1. From the Home screen on the con trol panel, touch the Setup button. 2. Open the following menus: ● Service ● LaserJet Up date [...]

  • Seite 162

    146 Chapter 7 Manage and maintain ENWW[...]

  • Seite 163

    8 Solve problems ● Problem-solving checklist ● Restore the factory-set defaults ● Control panel help system ● Interpret control panel messa ges ● Paper feeds incorrectly or becomes jammed ● Clear jams ● Improve pr int quality ● Solve copy quality problems ● Solve scan quality p roblems ● Solve fax quality problems ● The produc[...]

  • Seite 164

    Problem-solving checklist Follow these steps when trying to solve a problem with the product. ● Step 1: Chec k that the product power is on ● Step 2: Check the control panel for error messages ● Step 3: Test print functionality ● Step 4: Test copy functionality ● Step 5: Test the fax sending functionality ● Step 6: Test the fax receivin[...]

  • Seite 165

    Step 4: Test copy functionality 1. Place the configuration page into the document fe eder, and then make a copy. If the p aper does not feed smoothly through the document feeder , you might need to clean the document feeder rollers and s eparation pad. Make sur e the paper meets specific ations for this product. 2. Place the configuration page onto[...]

  • Seite 166

    Restore the factory-set defaults 1. From the Home screen, touch the Setup button. 2. Scroll to and touch the Service menu. 3. Scroll to and touch the Rest ore Defaults button, and then touch the OK button . The product automatically restarts. Control panel help system The product has a built-in Help system that exp lains how to use each screen . To[...]

  • Seite 167

    Interpret control panel messages Control panel message types The control panel mess ages indicate the current prod uct status or situations that might requir e action. Alert and warning messages appear t emporarily an d might require you to acknowledge the message by pressing the OK button to resume or by pressing the Cancel button to cancel the jo[...]

  • Seite 168

    Recommended action Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. If the message persists , contact HP support. 50.x Fuser Error Description The product has experience[...]

  • Seite 169

    If the message persists , contact HP support. 55.X Error Description The product has experienced an internal error. Recommended action Turn the product power off, wait at leas t 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket.[...]

  • Seite 170

    Recommended action Turn the product power off, wait at leas t 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. If the message persists , contact HP support. Black Cartridge Low Description The toner [...]

  • Seite 171

    Cleaning Description The product periodically performs a c leaning procedure to maintain the best print quality. Recommended action Wait for the cleaning process to finish. Cyan Cartridge Low Description The toner cartridge is nearing the end of its useful life. Recommended action Printing can continue, but consider ha ving a replacement supp ly on[...]

  • Seite 172

    Device error, press OK Description An internal error occurred. Recommended action Press the OK button to resume the job. Door open Description The product front door is open. Recommended action Close the door . Genuine HP supply installed Description A genuine HP supply was ins talled. Recommended action No action necessary. Incompatible <color&[...]

  • Seite 173

    Install <color> cartridge Description The toner cartridge is either not installed or not correctly installed in the product. Recommended action Install the toner cartridge. Invalid driver Press [OK] Description You are using an incorrect printer driver. Recommended action Select the correct printer dr iver. Jam in Tray 1, Clear jam and then p[...]

  • Seite 174

    Load Tray 1, <PLAIN> <SIZE> / Cleaning mode, OK to start Description The product is ready to process the cleaning operation . Recommended action Load Tray 1 with plain paper in the size indicated, and then press the OK button. Magenta Cartridge Low Description The toner cartridge is nearing the end of its useful life. Recommended action[...]

  • Seite 175

    Manual Duplex Load Tray 1, Press OK Description The first side of a manua l duplex job has printed, and the page needs to be loaded to proce ss the second side. Recommended action Load the page in the indicated tray with the side to be printed face up, and the top of the page away from you, and then press the OK button. Memory is lo w. Press OK. De[...]

  • Seite 176

    Rear door open Description The product rear door is open. Recommended action Close the door . Remove shipping lock from <color> cartridge Description A toner cartridge shipping lock is installed. Recommended action Pull the orange tab to remove the shipping lock from the cartridge. Remove shipping locks from cartridges Description A toner car[...]

  • Seite 177

    Recommended action Check the supply level gauges on the control panel, or print a supplies status page to d etermine which toner cartridges are low. Printing will continue until a Very Low message d isplays. Consider having replacement supplies on hand. Unexpected size in tray 1 Load <size> Press [OK] Description The product has detected pape[...]

  • Seite 178

    Used supplies in use Description You are using more than one toner cartridge that reached the default low threshold while it was installed in a product. Recommended action Printing can continue, but consider ha ving replacement supplies on hand. Yellow Cartridge Low Description The toner cartridge is nearing the end of its useful life. Recommended [...]

  • Seite 179

    Paper feeds incorrectl y or becomes jammed The product does not pick up paper If the product d oes not pick up pape r from the tray, try these solutions. 1. Open the product and remove any jammed sheets of paper. 2. Load the tray with the correct size of pa per for your job. 3. Make sure the paper guides in the tray are adju sted correctly for the [...]

  • Seite 180

    Clear jams Jam locations Jams can occur in these locations: 1 Document feeder 2 Output bin 3 Rear door 4I n p u t t r a y Loose toner might remain in the product after a jam. This problem typically resolves itself after a few sheets have been printed. 164 Chapter 8 Solve problems ENWW[...]

  • Seite 181

    Clear jams from the document feeder 1. Turn the product off. 2. Open the docume nt feeder cover. 3. Lift the document feeder roller assembly, and gently pull the jammed paper out. ENWW Clear jams 165[...]

  • Seite 182

    4. Close the document feeder roller assembly, and then close the document feeder cover. 5. Open the scanner lid. If pap er is jammed behind the white plastic backing, gently pull it out. Clear jams in the paper input tray CAUTION: Do not u se sharp objec ts, such as tw eezers or needle-nose pliers, to remove jams. Damage caused by sharp objects is [...]

  • Seite 183

    1. Pull out the tray, and lift the jam access door above the tray. 2. With both hands, grasp the pap er, and carefully pull it free from the product. 3. Replace the tray. 4. Press the OK button to continue printing. ENWW Clear jams 167[...]

  • Seite 184

    Clear jams from the output bin CAUTION: Do not u se sharp objec ts, such as tw eezers or needle-nose pliers, to remove jams. Damage caused by sharp objects wi ll not be covered by the warranty. 1. With both hands, grasp the pap er, and carefully pull it free from the product. Clear jams from the rear door 1. Open the rear door. CAUTION: The fuser i[...]

  • Seite 185

    2. With both hands, grasp the pap er, and carefully pull it free from the product. NOTE: If the she et tears, remo ve all fragments before contin uing. Do not use sharp objects to remove fragments. 3. Close the rear do or. ENWW Clear jams 169[...]

  • Seite 186

    Improve print quality Check the paper type setting (Windows) Check the paper type setting if you are having any of the following problems: ● Toner is smearing on the printed pages. ● Repeated marks occur on the printed pages. ● Printed pages are curled. ● Toner flakes off the printed pages. ● Printed pages have small unprinted areas. 1. F[...]

  • Seite 187

    6. Select a type from the Media-type drop-down list. 7. Click the Pr int button. Check toner cartridge status If you determine that you need to replace a toner cartridge, print the supplies sta tus page to find the part number f or the correct genuine HP toner cartridge. Print the supplies status page Information pages reside within the product mem[...]

  • Seite 188

    Print a cleaning page 1. From the Home screen, touch the Setup button. 2. Touch the Service menu. 3. Touch the Cleaning Page button. 4. Load plain letter or A4 paper when y ou are prompted. 5. Touch the OK button to begin the cleanin g process. The product prints the first side and then prom pts you to remove the pa ge from the output bin and reloa[...]

  • Seite 189

    Section Toner cartridge 3B l a c k 4M a g e n t a ● If dots or streaks appear in only one of the grou ps, replace the toner cartridge that correlates with that grou p. ● If dots app ear in more t han one group, print a cleaning page. If this does not solve the problem, determine if the dots are always the same color; for example, if magenta dot[...]

  • Seite 190

    Check the paper and printing environment Use paper that meets HP specifications Use different paper if you are havi ng any of the following problems: ● The printing is too light or seems faded in areas. ● Specks of toner are on the p rinted pages. ● Toner is smearing on the printed pages. ● Printed characters seem misformed. ● Printed pag[...]

  • Seite 191

    Adjust color settings in the printer driver Change the color theme for a print job 1. On the File menu in the software program, click Print . 2. Click Prope rties or Preferences . 3. Click the Co lor tab. 4. Select a color theme from the Color Themes drop-dow n list. ● Default (sRGB) : This theme sets the product to prin t RGB d ata in raw device[...]

  • Seite 192

    4. Click the Automatic or Manual setting. ● Automatic setting: Select this sett ing for most color print jobs ● Manual setting: Select this setting to adjust the color setti ngs independent from other settings. NOTE: Changing color settings manually can im pact output. HP recommends that only color graphics experts c hange these settings. 5. Cl[...]

  • Seite 193

    HP UPD PCL 5 ● Recomm ended for general office printing in Windows environments ● Compatible with previous PCL versions and older HP LaserJet products ● The best choice for printing from th ird-party or custom software programs ● The best choice when operating with mixed environments, which require the product to be set to PCL 5 (UNIX, Linu[...]

  • Seite 194

    Solve copy quality problems Check the scanner glass for dirt and smudges Over time, sp ecks of debris mi ght collect on the scanner glass and white plasti c backing, which can affect performance. Use the following procedure to clean the scanner glass and white plastic backing. 1. Use the power switch to turn off the product, and then unplug the pow[...]

  • Seite 195

    Check the paper settings 1. From the Home screen, touch the Copy button. 2. Touch the Settings button, and then scroll to and touch the Paper button. 3. From the list of paper sizes, touch the name of the paper size that is in Tray 1. 4. From the list of paper types, touch the name of the paper type that is in Tray 1. 5. Touch the Black or Color bu[...]

  • Seite 196

    3. Touch the name of the setting you want to adjust. ● Lightness : Adjusts the lightness/darkness setting. ● Contrast : Adjusts the contrast between the lightest and darkest areas of the image. ● Sharpen : Adjusts clarity of text characters. ● Background Removal : Adjusts the darkne ss of the background of the image. Th is is especially use[...]

  • Seite 197

    1. Load the document onto the scanner glass or into the document feeder. 2. From the Home screen, touch the Copy button. 3. Touch the Settings button, and then scroll to and touch the Optimize button. Touch the arrow buttons to scroll through the options, and then touch an option t o select it. 4. Touch the Black or Color button to start copying. E[...]

  • Seite 198

    1. Open the docume nt feeder cover. 2. Use a moist, lint-free cl oth to wipe both pickup rollers and the separat ion pad to remove dirt. 3. Close the document feeder co ver. 182 Chapter 8 Solve problems ENWW[...]

  • Seite 199

    Solve scan quality problems Check the scanner glass for dirt and smudges Over time, sp ecks of debris mi ght collect on the scanner glass and white plasti c backing, which can affect performance. Use the following procedure to clean the scanner glass and white plastic backing. 1. Use the power switch to turn off the product, and then unplug the pow[...]

  • Seite 200

    Check the resolution settings The following table describes the re commended resolution and color sett ings for different types of scan jobs. NOTE: The default resolution is 200 ppi. Intended use Recommended resolution Recommended color settings Fax 150 ppi ● Black and White Email 150 ppi ● Black and White, if the image does not require smooth [...]

  • Seite 201

    Check the image adjustment settings 1. From the Home screen, touch the Copy button. 2. Touch the Settings button, and then scroll to and touch the Image Adjustment button. 3. Touch the name of the setting you want to adjust. ● Lightness : Adjusts the lightness/darkness setting. ● Contrast : Adjusts the contrast between the lightest and darkest [...]

  • Seite 202

    Optimize for text or pictures The following co py-quality settings are av ailable: ● Auto Select : Use this setting when you are not concerned about the quality of the copy. This is the default setting. ● Mixed : Use this setting for documents that contain a mixture of text and graphics. ● Text : Use this setting for docume nts that contain m[...]

  • Seite 203

    1. Open the docume nt feeder cover. 2. Use a moist, lint-free cl oth to wipe both pickup rollers and the separat ion pad to remove dirt. 3. Close the document feeder co ver. ENWW Solve scan quality problems 187[...]

  • Seite 204

    Solve fax quality problems Check the scanner glass for dirt and smudges Over time, sp ecks of debris mi ght collect on the scanner glass and white plasti c backing, which can affect performance. Use the following procedure to clean the scanner glass and white plastic backing. 1. Use the power switch to turn off the product, and then unplug the powe[...]

  • Seite 205

    Check the send-fax resolution setting If the product was unable to send a fax because th e receiving fax machine did not answer or was busy, the product attempts to redial based on the redial-on-bu sy, redial-on-no-ans wer, and redial-on- communication-error options. 1. From the Home screen, touch the Setup button. 2. Touch the Fax Setup menu. 3. T[...]

  • Seite 206

    4. Touch the — or + buttons to adjust the value for the setting, and then touch the OK button. 5. Adjust another setting, or touch the back arrow to return to the main copy menu. 6. Touch the Black or Color button to start copying. Optimize for text or pictures The following co py-quality settings are av ailable: ● Auto Select : Use this settin[...]

  • Seite 207

    You should turn off error correction only if you are having trouble se nding o r receiving a fax, and you are willing to accept the errors in the transmission. Turning off the se tting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection. 1. From the Home scree[...]

  • Seite 208

    2. Use a moist, lint-free cl oth to wipe both pickup rollers and the separat ion pad to remove dirt. 3. Close the document feeder co ver. Check the Fit-to-Page setting If the product printed a fax job off the page, turn on the fit-to-page feature from the product control panel. 1. From the Home screen, touch the Setup button. 2. Touch the Fax Setup[...]

  • Seite 209

    Perform a fax di agnostic test From the product control panel, you can run a diagno stic test that provides information about the product fax settings. 1. From the Home screen, touch the Setup button. 2. Open the following menus ● System Setup ● Self Diagnostics 3. Touch the Run Fax Test button to start the test. The product pr ints a test page[...]

  • Seite 210

    The product does not print or it prints slowly The product does not print If the product does not print at all, try the following solutions. 1. Make sure the product is turned on and th at the control panel indicates it is ready. ◦ If the control panel does not indicate the prod uct is ready, turn the product off and then on again. ◦ If the con[...]

  • Seite 211

    The product prints slowly If the product prints, but it seem s slow, try the following solutions. 1. Make sure the computer meets the minimum spec ifications for this product. For a list of specifications, go to this Web site: www.hp.com/ support/ljcolorm276series . 2. When you configure the product to print on some pape r types, such as heav y pap[...]

  • Seite 212

    Solve walk-up USB printing problems ● The USB Flash Drive menu does not open when you ins ert the USB accessory ● The file does not print from the USB storage accessory ● The file that you want to print is not listed in the USB Flash Drive menu The USB Flash Drive menu does no t open when you insert the USB accessory 1. You might be using a U[...]

  • Seite 213

    The file that you want to print is not listed in the USB Flash Drive menu 1. You might be trying to print a file type that the USB printing feature does not support. The product supports .PDF and .JPEG file types. 2. You might have too many files in a single fold er on the USB storage accessory. Reduce the number of files in the folder by moving th[...]

  • Seite 214

    Solve direct connection problems If you have connected the product dire ctly to a computer, check the cable. ● Verify that the cable is connected to the computer and to t he product. ● Verify that the cable is no t longer than 5 m (16.4 ft). Try using a shorter cable. ● Verify that the cable is working correctly by conne cting it to another p[...]

  • Seite 215

    Solve wired network problems Check the following items to verify that the pr oduct is communicating wi th the network. Before beginning, print a configuration page from the prod uct control panel and lo ca te the product IP address that is listed on this page. ● Poor physical connection ● The computer is using the inco rrect IP address for the [...]

  • Seite 216

    The computer is unable to communicate with the product 1. Test network communication by pinging the network. a. Open a command-line prompt on your computer. For Windows, cli ck Start , click Run , and then type cmd . b. Type ping followed by the IP addres s for your product. For Mac OS X, open the Network Utility, and th en supply the IP address in[...]

  • Seite 217

    Solve wireless network problems NOTE: This section applies to the HP LaserJet Pro 200 color M276nw MFP model o nly. Wireless connectivity checklist ● Verify that the network cable is not connected. ● Verify that the product and the wireless router ar e turned on and have power. Also make sure that the wireless radio in the product is turned on.[...]

  • Seite 218

    The product does not print, and the computer has a third-party firewall installed 1. Update the firewall with the most recent update availab le from the manufacturer. 2. If programs request firewall access when you inst all the product or try to print, make s ure you allow the programs to run. 3. Temporarily turn off the firewall, and then install [...]

  • Seite 219

    The wireless network is not functioning 1. Make sure that the networ k cable is not connected. 2. To verify if the network has lost communication , try connecting other devices to the network. 3. Test network communication by pinging the network. a. Open a command-line prompt on your computer. For Windows, cli ck Start , click Run , and then type c[...]

  • Seite 220

    Reduce interference on a wireless network The following tips can reduce inte rference in a wire less network: ● Keep the wireless devices away fr om large metal object s, such as filing cabinets, and other electromagnetic devices, such as mic rowaves and cordless telephones . These objects can disru pt radio signals. ● Keep the wireless devices[...]

  • Seite 221

    Solve product software problems with Windows A printer driver for th e product is not visible in the Printer folder 1. Reinstall the product software. NOTE: Close any applications that are running. To close an applicat io n that has an icon in the system tray, right-click the icon, and select Close or Disable . 2. Try plugging the USB cable into a [...]

  • Seite 222

    Windows 7 a. Click Start . b. Click Devices and Printers . c. Right-click the product driver icon, and then select Printer properties . d. Click the Ports tab, and then click Configure Port . e. Verify the IP address, and then click OK or Cancel . f. If the IP addresses are not the same, delete the driver, and then reinstall the driver using the co[...]

  • Seite 223

    Solve product software problems with Mac OS X ● The printer driver is not listed in the Print & Fax list ● The product name does not appear in th e product list in the Print & Fax list ● The printer driver does not auto matically set up the selected product in t he Print & Fax list ● A print job was not sent to the product that [...]

  • Seite 224

    A print job was not sent to the product that you wanted 1. Open the print queue, and then restart the print job . 2. Another product with the same or similar name might have received your print job. Pr int a configuration page to check the product name. Verify that the name on the configuration page matches the produc t name in the Print & Fax [...]

  • Seite 225

    Remove software (Windows) Windows XP 1. Click Start , and then clic k Programs . 2. Click HP , and then click the pr oduct name. 3. Click Uninstall , and then follow the onscreen instructions to remove the software. Windows Vista and Windows 7 1. Click Start , and then clic k All Programs . 2. Click HP , and then click the pr oduct name. 3. Click U[...]

  • Seite 226

    210 Chapter 8 Solve problems ENWW[...]

  • Seite 227

    9 Supplies and accessories ● Order parts, ac cess ories, and supplies ● HP policy on non-HP supplies ● HP antico unterfeit W eb site ENWW 211[...]

  • Seite 228

    Order parts, accessories, and supplies HP original toner cartridge and paper www.hp.com/ go/suresupply Order genuine HP parts or accessories www.hp.com/ buy/parts Order through service or support providers Contact an HP-authorized service or support provider. Item Part number Cartri dge number Descriptio n HP LaserJet toner cartridge CF210A (standa[...]

  • Seite 229

    Index A accessories ordering 211, 212 AirPrint 49 answer mode, setting 87 answering machines, connecting fax settings 88 anticounterfeit supplies 212 applications downloading 130 Apps menu 130 archival-quality printing 42 autoreduction settings, fax 90 B billing codes, fax using 85 bin, output jams, clearing 168 locating 2 blocking faxes 88 booklet[...]

  • Seite 230

    redialing automatically, settings 83 tone or pulse settings 83 distinctive-ring settings 89 document feeder jams 165 door release, locating 2 dots per inch (dpi) fax 84 double-sided printing (duplexing) Mac 36 dpi (dots per inch) fax 84 draft mode, copying 64 drivers changing settings (Mac) 19 changing settings (Windows) 17 presets (Ma c) 36 settin[...]

  • Seite 231

    HP Scan software (Windows) 70 HP Utility for Mac features 135 opening 135 HP Utility, Mac 135 HP Web Jetadmin 136 HP Web Services applications 130 enabling 130 HP Web Services, en abling 48 I identification cards copying 60 input tray locating 2 interface ports locating 3 IPv4 address 131 ISDN faxing 94 J jams document feeder, clearing 165 locating[...]

  • Seite 232

    part numbers toner cartridges 212 pauses, inserting 82 PBX faxing 94 PCL font list 6 phone book, fax adding entries 97 deleting al l entries 79 importing 78 phones receiving faxes from 76, 102 phones, downstream sending faxes from 99 polling faxes 91 portrait orientation changing (Mac) 37 changing (Windo ws) 28 ports locating 3 power-down delay set[...]

  • Seite 233

    shortcuts (Windows ) creating 22 using 21 size, c opy reducing or enlarging 58 sizes, med ia Fit to Page setting, faxing 90 sleep dela y disabling 137 enabling 137 small documents copying 60 software HP Utility for Mac 135 HP Web Jetadmin 136 problems 205 Readiris OCR 74 scanning from TWAIN or WIA 74 sending faxes 97 uninstalling for Mac 209 uninst[...]

  • Seite 234

    218 Index ENWW[...]

  • Seite 235

    [...]

  • Seite 236

    © 20 1 2 He wlett-P ack ar d Dev elopment Compan y , L.P . www .hp.com[...]