HP (Hewlett-Packard) SAN Switch Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung HP (Hewlett-Packard) SAN Switch an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von HP (Hewlett-Packard) SAN Switch, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung HP (Hewlett-Packard) SAN Switch die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung HP (Hewlett-Packard) SAN Switch. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung HP (Hewlett-Packard) SAN Switch sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts HP (Hewlett-Packard) SAN Switch
- Den Namen des Produzenten und das Produktionsjahr des Geräts HP (Hewlett-Packard) SAN Switch
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts HP (Hewlett-Packard) SAN Switch
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von HP (Hewlett-Packard) SAN Switch zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von HP (Hewlett-Packard) SAN Switch und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service HP (Hewlett-Packard) finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von HP (Hewlett-Packard) SAN Switch zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts HP (Hewlett-Packard) SAN Switch, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von HP (Hewlett-Packard) SAN Switch widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    McD A T A ® 4Gb S AN S w it c h f or HP p-C las s Blade S y ste m us er guid e P ar t number : AA-RW20C-TE Thir d edition: No vember 2006[...]

  • Seite 2

    Legal and no tice inform ation © Cop yr ight 2006 Hew lett-P ack ard De velopmen t Compan y , L.P . © Cop yr ight 2006 McD A T A Corpor ation . © Cop yr ight 2006. T his softwar e include s technolog y under a license f rom QL ogic C orpor ation . All r ights r eserved . Hew lett-P ack ard C ompan y makes no w arr anty of any kind w ith r egard [...]

  • Seite 3

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 3 About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Intended audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Prerequisite[...]

  • Seite 4

    4 Sorting the event brow ser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Filtering the event browse r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Saving the event browse r to a file . . . . . . . . . . . . . . . . [...]

  • Seite 5

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 5 Port status and opera tional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 McDATA Web Server C onfigured Zonese ts data window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Configuring port thresh ol[...]

  • Seite 6

    6 10 Events browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 11 Filter events dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 12 Devices data window . . . . . . . . . . . . . . . . . . .[...]

  • Seite 7

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 7 Abo ut this gui de This man ual descr ibes the McD A T A ® W eb Server™ and McD A T A Element Manager ™ management tools for the McD A T A 4Gb SAN S witch. McD A T A Element Manager is ref err ed to as Element Manager thr oughout this doc ument . The McD A T A 4Gb S AN S w itch[...]

  • Seite 8

    8 Doc umen t con v enti ons and s y mbols WA R N I N G ! Indicates that failure to follow directi ons could re sult in bodily harm or death . CAUT ION: Indicates that f ailur e to follo w dir ecti ons could re sult in damage to equipment or data . IMP O RT A NT : Pr o v ides c larify ing inf ormati on or spec if ic instr ucti ons. NO TE: Pr ov ides[...]

  • Seite 9

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 9 2. Redis tributi ons in binary for m must r epr oduce the abo ve cop y ri ght notice , this list of conditi ons, and the disc laimer that fo llow s thes e conditions in the doc umentati on and/or other mat eri als pr ov i ded with the distr ibution . 3. The name "JDOM" m u[...]

  • Seite 10

    10 Helpful w eb sites F or other pr oduct infor mation , see the f ollo w ing HP we b sites: • http://www .hp.com • http://www .hp .com/go/stor age • http://www .hp.com/su pport/ • http://ww w .docs .hp.com • http://h710 2 8.www7 .hp.com/ent erpr ise/cache/8 0316 -0 -0 -0 -121.htm l[...]

  • Seite 11

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 11 1 Using McD A T A W e b Ser ver/El ement Man ag er This s ection de scr ibes ho w to us e the McD A T A W eb Server and Eleme nt Manager applicati ons and their menus . McD A T A W eb Server is a gr aphical us er interface that pr o v ides both fa bri c and sw itch module managemen[...]

  • Seite 12

    12 W or kstation r e quir ements The r equir ements f or fa bri c management wo rkstati ons running the McD A T A W e b Serv er web applet ar e listed in Ta b l e 2 . St arting McD A T A W eb Serv er T o start McDA T A W e b Serv er after the sw itc h is oper ational , ente r the sw itc h IP addre ss in an internet br ow ser . T he wor kstation u s[...]

  • Seite 13

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 13 St ar ting Element Ma nager in HAFM T o use Element Manager , the H AFM clie nt applicati on mus t be running on y our w or kstatio n, or y ou m ust be accessing HAFM on the HAFM Appli ance. See yo ur HAFM document ation f or info rmatio n about starting and using HAFM. T o start E[...]

  • Seite 14

    14 Setti ng pre fer enc es Y ou can c ustomi z e the follow ing pr efe rence s ettings for McD A T A W eb Server and Elemen t Manager: • Change the location o f the wor king dir ectory in whic h to sa ve f iles . • Change the location o f the bro w ser us ed to vi e w the online help . • Select a Displa y Dialog When Making No n -sec ur e Con[...]

  • Seite 15

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 15 Using online help Online help is av ailable f or the McD A T A W eb Serv er and Element Manager applicati ons and their func tions . Online help is also cont ext-sensiti v e , that is, the online he lp opens to the top ic that de scr ibes the dialog y ou hav e open. T o open online[...]

  • Seite 16

    16 User inter face The McD A T A W eb Server and Element Manager a pplicatio ns share a common in terface as sh ow n in Fi g u re 3 . T he interface consists of a men u bar , fabr ic tr ee , gra phic w indo w , data w indow s (some w ith buttons) , and data w indow t abs. T he sw itc h faceplat e is displa yed in the gr aphic w indo w and sho ws th[...]

  • Seite 17

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 17 Menu bar The McD A T A W eb Ser v er and Element Manager menu bar opti ons are lis ted in Ta b l e 3 . T able 3 Menu Bar Options Menu McD A T A W eb Ser ver Options Element Manag er Options F ile Prefer ences Prefe rences HAFM Settings Ex it Fa b ri c N i ck n a m e s Redis cov er [...]

  • Seite 18

    18 P opup menus P opup menus ar e displa yed w hen y ou ri ght-clic k the s witc h faceplat e image in the graphi c w indow . P o pup menu opti ons gi ve y ou q uic k access t o the fo llow ing common tasks and dialog s: • Re fr eshing a s w itc h • Selecting all ports or blades • Pr operties dialogs (P ort , Blade, S witc h, Netwo rk , and S[...]

  • Seite 19

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 19 McD A T A W eb Se r v er F abr i c tr ee McD A T A W eb Server e nables y ou to manage McD A T A 4Gb SAN S witc hes and obs erve other s wit ches in th e fa bric. The fab ric t ree, s hown i n Fi g u r e 4 , pro v ides acces s to the faceplate displa y of each McD A T A 4Gb S AN S [...]

  • Seite 20

    20 Data w indo ws and t abs The dat a windo w pr esents a t able of data and statis tic s assoc iat ed with the se lected tab f or the s w itch displa yed in the gr aphic w indo w . Use the s cr oll bar to br o ws e thr ough the data. T he windo w length can be adjus ted by c lic king and dr agging the borde r that it shares w ith the gr aphic w in[...]

  • Seite 21

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 21 2 Managing F abr ic s This s ection des cr ibes the f ollo wing t asks that manage fabr ics u sing McDA T A W eb Server: • Sec uring a f abr ic , page 2 1 • Redis cov er ing a fa bri c , page 30 • Displa ying the e vent br o w ser , page 31 • W orking w ith dev ice inf or m[...]

  • Seite 22

    22 Con n e ct io n se curi t y IMP O RT A NT : T he S SL and S SH serv ices can be managed o nly w ith Element Manager , whic h r equir es the Element Manager PFE k ey , and the CLI. See ” Installing Pr oduc t F eature Ena blement k ey s ” on page 8 2 for mor e infor mation about ins talling a PFE ke y . T o obtain the McD A T A 4Gb SAN S witch[...]

  • Seite 23

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 23 De v i ce sec ur ity IMP O RT A NT : De vi ce sec ur ity is avai lable only w i th the McD A T A S ANtegr ity™ Enhanced PFE ke y and can be managed only w ith the CLI and Element Manager . Element Manager also r equir es a PFE k e y . See ” Installing Pr oduc t F eatur e Enable[...]

  • Seite 24

    24 E dit Sec urity dialog Use the E dit Secur ity dialog to edit the sec urity conf igur ation on the s w itch . Y ou can also open and edit a sec ur ity conf igur ation sav ed to a file . E diting sec ur ity files co nsists of r enaming and r emo ving s ecur ity sets , gr oups , and members. T he Sec urity dialogs ar e a vaila ble only on a sec ur[...]

  • Seite 25

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 25 Cr eate Sec urity Set dialog Use the C reat e Sec ur ity Set dialog s ho wn in Fig u r e 6 t o cre a t e a n ew s ec ur i t y s et. T h er e i s a m a xi m u m of 4 security set s. Fig ur e 6 Create Sec urity Set dial og T o add a sec ur ity set fr om the faceplate displa y: 1. Cli[...]

  • Seite 26

    26 An empty (no member s) sec urity gr oup in the acti ve sec urity set w ill pr e ve nt all connecti ons fo r that sec urity gr oup type . F or e xample , an empty ISL sec ur ity grou p will cau se the sw itc h to r efu se all logins fr om other s witc hes . T o add a sec urity gr oup to a sec ur ity set: 1. Click Security on the tool bar in the f[...]

  • Seite 27

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 27 The c onv enti ons f or P ort sec ur ity grou p members ar e lis ted belo w : • Y ou can enter member W orld Wi de Name (WWN) , whic h must be 16 hex c harac ters, or 2 3 char acter s with v alid WWN for mat xx:xx: xx:xx:xx :xx:xx:xx . • The au thenticati on ch oices ar e None [...]

  • Seite 28

    28 Ed i t i n g t h e s e cu r i t y c o nf igur atio n on a s w itch T o edit a sec ur ity conf igur ation on the s w itch f r om the faceplate displa y: 1. Choose one of the f ollo wing to open the E dit Secur ity dialog: •C l i c k Security on the tool bar . •S e l e c t Security > Edit Sec urity . B y defaul t, the s ecu rity conf igur a[...]

  • Seite 29

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 29 Sec ur ity Conf i g dialog Use the Sec ur ity Confi g dialog , show n in Fi g u re 9 , to sav e the acti ve s ecur ity configur ation on the s w itch t o non-volatile or to tempor ar y memory , and to requir e the domain I D of a s w itch be v alidated bef or e atta ching to the fa[...]

  • Seite 30

    30 Deacti v ating a sec ur ity set Only o ne sec urity set can be acti v e at one time. T o deacti vate an ac tiv e sec urity set f r om the faceplate displa y: 1. Select Se c urit y > De ac tiva te Se cu rit y S et . 2. Select a se cur ity set fr om the dr op-dow n list in the Deacti vate Sec ur ity Set dialog. 3. Click Ye s to confir m that yo[...]

  • Seite 31

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 31 Displa y ing the e v ent br o w ser The E ven t Br ow ser dis play s a list of e vents gene rated b y the sw itches in the fabr i c and the McDA T A W eb Server w eb applet . E vents that ar e gener ated b y the McD A T A W eb Serve r web apple t are n ot sav ed on the s witc h, bu[...]

  • Seite 32

    32 Se ve rity is indicated in the sev er ity column using icons as descr ibed in Tab l e 4 . NO TE: E ven ts (Alar ms, Cr itical , W arning, and Inf ormati v e) generat ed by the w eb applet ar e not sav ed on the s wit ch . The y ar e permanen tly discar ded w hen yo u clos e a McDA T A W eb Server se ssion , but y ou can sav e these e v ents to a[...]

  • Seite 33

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 33 F i lter ing the ev ent br o wser F ilter ing the Ev ent Br ow ser enabl es yo u to display onl y those e ven ts that are o f inter est based on the e vent se ver ity , timestam p, s our ce, ty pe , and descr iption . T o filter the E ve nt Bro wser , open the F i lter men u and se[...]

  • Seite 34

    34 W orking w ith de v ice inf ormati on and ni c knames Dev ice s ar e hosts and sto rage ta rgets connect ed to the sw itch . A nickname is a u ser -def inable , meaningful name that can be used in place o f the W or ld Wi de Name . This sub-s ection de scr ibes ho w to v ie w and manage dev i ce infor mation and ni cknames . • Dev i ces data w[...]

  • Seite 35

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 35 Displa y ing detailed de v ice inf or mati on In addition to the inf or mation that is av ailable in the De vi ces data w indo w , yo u can cli ck the (i) in the Details column to displa y mor e info rmatio n as sho wn in Fig u re 1 3 . Fig ur e 1 3 Detailed de v ices displa y dial[...]

  • Seite 36

    36 Cr eating a nic kname T o creat e a dev ice port nic kname: 1. Select Fabric >Nicknames to open the Nic knames dialog . 2. Choos e one of the f ollo wing methods to en ter a nic kname . A nickname mu st start w ith a letter and can hav e up to 64 c har acters . V alid char acter s include alphanumer ic c har acter s [aA-zZ][0-9] and special s[...]

  • Seite 37

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 37 Zo n i n g a f a b ri c If HAFM is used to manage the fabr ic , it is recommended to us e HAFM to manage the fabr ic z oning. If HAFM is not used and other McD A T A sw itch models ar e in the f abri c , it is recomme nded to use HAFM Basic or EFCM Basic , or in earlier f irm w are[...]

  • Seite 38

    38 Zo n e s e t s A z one s et is a named group o f z ones . A z one can be a member of mor e than one z one se t. E ach sw itc h in the fabr ic main tains its o wn z oning database containing the ac tiv e z one se t. T his z oning dat abase r esides in no n -vol atile or permanent memory and is ther ef ore r et ained after a re set . See ” Displ[...]

  • Seite 39

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 39 Z oning limits and pr opertie s Z oning limits v ary depending on the f irm war e installed on the s witc h . T o v ie w z oning limits and pr operties on a s witc h: 1. Select Zoning > Edit Zoning to open the E dit Z oning dialog. 2. Choo se one of the f ollo wing: • R ight-c[...]

  • Seite 40

    40 Managing the z oning database Managing the z oning databas e consists of the f ollo win g: • E diting the z oning databas e , page 40 • Conf igur ing the z oning dat abase , page 4 2 • Sa ving the z oning databas e to a file , page 4 2 • Re stor ing the z oning database fr om a file , page 4 2 • Re stor ing the def ault z oning databas[...]

  • Seite 41

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 41 • C l i c k a zo n e, zo n e s e t , o r p o r t i c o n . • R ight-cli ck t o select a z one set or z one , and open the cor re sponding popup menu . • Hold do wn the Shift k e y whil e cli cki ng sev er al co nsec uti ve i cons . • Hold do wn the Contr ol k e y while cli [...]

  • Seite 42

    42 Conf i guring the z oning database Use the Z oning Conf ig dial og to change the Inter op Auto Save and Def ault Zone config urati on parame ters . The Default Zone par ameter a pplies onl y when Int er op Mode is set to McD A T A F abr ic Mode . Open the faceplate dis play . Selec t Zoning > Edit Z oning Config to open the Z oning Conf ig di[...]

  • Seite 43

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 43 Re stor ing the def ault z oning database Re stor ing the def ault z oning clears the sw itc h of all z oning def initions . R est oring de fault z oning is a fabr ic -w ide acti on. W hen you ar e in S tandar d mode and re stor e defa ult z oning , no de vi ces/ports are a ble to [...]

  • Seite 44

    44 Displa y ing the confi gur ed and acti v e z one sets Y ou can displa y the contents of the conf igur ed z one set and acti v e z one set w ith the Co nfi gured Z oneset data w indow and the Acti ve Z oneset data w indo w . T he Conf igur ed Z ones ets and Acti v e Z oneset data w indow s use dis play con ven tions f or expanding and contr actin[...]

  • Seite 45

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 45 Cr eating a z one set To c r e a t e a zo n e s e t : 1. Select Zoning > Edit Zoning to open the E dit Zoni ng dialog . 2. Select Edit > Create Zone Set to op en the C r eate Zone Set dialog. 3. Enter a name f or the ne w z one set , and c lic k OK . T he new z one set name i[...]

  • Seite 46

    46 Managing z ones Managing z ones inv ol ve s the fo llow i ng: • Cr eating a z one in a z one se t , page 46 • Adding z one members , page 4 7 • Re naming a z one or a z one se t , page 4 7 • Re mov ing a z one member , page 4 7 • Re mov ing a z one fr om a z one s et , page 48 NO TE: C hanges y ou sav e to the z oning database on a s w[...]

  • Seite 47

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 47 Adding z one members Y ou can z one a por t/dev i ce by s w itch domain ID an d port number , or the dev i ce port WWN. Adding a port/dev ice to a z one affects e v ery z one set in whi ch that z one is a member . Domain ID/port z oning is only supported in McD A T A Fa bri c inter[...]

  • Seite 48

    48 R emo v ing a z one fr om a z one set To r e m ov e a zo n e f ro m a zo n e s e t : 1. Select the z one to be r emov ed in the E dit Z oning dialog . The selected z one will be r emov ed fr om that zo n e s e t o n l y . 2. Select Edit > Remove . 3. Click Ye s in the Remo v e dialog to s av e the ch ange. 4. Click Apply in the E dit Z oning [...]

  • Seite 49

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 49 3 Managing s w itc he s This s ection de scr ibes the f ollo w ing tasks that manage s w itche s using the McD A T A W eb Server or Ele ment Manager applicati on. • Managing user accounts , page 4 9 • Conf igur ing RAD IUS s ervers , page 54 • Displa y ing s witc h inf ormati[...]

  • Seite 50

    50 NO TE: If the same us er account ex ists on a s w itch and its RADIUS server , that user can login w ith either pass w or d, but the autho rity and account e xpir ation w ill alw ay s come fr om the sw itch databa se . Cr eating us er accounts A s wit ch can ha ve a max imum of 15 us er accounts. T o cr eate a ne w use r account on a sw itc h: 1[...]

  • Seite 51

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 51 R emo v ing a us er account T o remo ve a u ser account on a s w itch: 1. Select S witch > User Accounts in the faceplat e displa y to open th e User A ccount Administr ation dialog. 2. Click the Rem ov e Account tab to open the Remo v e Account tab page sho wn in Fi g ure 1 9 .[...]

  • Seite 52

    52 Changing a user account pas s w or d An y user can c hange their pas sw or d fo r their account , but only the A dmin account name can change the pass w or d for an other user ’s account . If the adminis trator does not kno w the us er’s or iginal pas sw or d , the administr ator mus t re mov e the account and add the account . T o change th[...]

  • Seite 53

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 53 Modifying a u ser account T o modif y a user account on a s w itc h: 1. Select Sw itch > User Accounts in the f aceplate displa y to open the U ser Account A dministr ation di alog. 2. Click the M odify Account tab to open the Modify Account tab page sho w n in Fig u re 2 1 . 3.[...]

  • Seite 54

    54 Con figu rin g R A D IUS se r vers IMP O RT A NT : RADIUS serve r support is available onl y w ith the McDA T A S ANtegr ity Enhanced PFE ke y and can be managed only w ith the CLI and Elemen t Manager . Element Manager also r equir es a PFE k e y . See ” Installing Pr oduct F eature Enableme nt k ey s ” on page 8 2 for mor e inf ormati on a[...]

  • Seite 55

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 55 Adding a RADIUS s erve r A RADIUS server pr o vi des a method to centr ali z e use r and dev ice a uthenticati on ov er a networ k. Fig ur e 22 RADIUS Server Inf ormati on dialog—Add S erver tab page T o add a RA DIUS s erver : 1. Select Switch > Radius Servers in the f acepla[...]

  • Seite 56

    56 Re movi n g a R A D I US s er ve r Re mov ing a RAD IU S server , disables the r emote authenti cation o f dev ice s or user s ov er the netw ork . Fig ur e 23 RADIUS Serve r Info rmation dialog—Remo v e Serv er tab page To r e m o v e a R A D I U S s e r v e r : 1. Select Switch > R adius Ser vers in the f aceplate displa y . 2. Click the [...]

  • Seite 57

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 57 E diting RADIUS s erver inf or mation E diting infor mation o f a R ADIUS serv er inv ol ve s changing the confi gurati on of a RADIUS serv er . Fig ur e 24 RADIUS Serve r Infor mation di alog—E dit Server ta b page T o edit informati on of a RADI U S server : 1. Select Switch &g[...]

  • Seite 58

    58 Modifying RADIUS serv er authenti cation or der E diting infor mation o f a R ADIUS serv er inv ol ves changing the confi gurati on of a RADIUS server . Fig ur e 25 RADIUS Server Inf ormati on dialog—Modify Au thenticati on Or der tab page T o modif y the au thenticatio n orde r infor mation o f a RADIUS server : 1. Select Switch > R adius [...]

  • Seite 59

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 59 Displa y ing s w itc h inf or matio n The f aceplate displa y and data windo ws pro v ide the f ollo wing s w itc h informati on: • Swi t ch e ve n t l o g , page 5 9 • Dev ice and Ho st Bu s Ada pter inf or mati on , page 5 9 • S w itch st atus and oper ational inf or mation[...]

  • Seite 60

    60 S wit ch s tatus and ope r ational inf ormatio n The Switch da ta win d ow , s hown in Fi g u r e 26 , display s the cur ren t status and oper ational inf ormatio n for the selected s w itch . T o op en the S w itch data w indow , clic k the Sw it c h tab belo w the data w indo w . Fig ur e 26 S witc h data w indow Infor mation in the S witc h d[...]

  • Seite 61

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 61 Sta tus Oper ational S tate S witc h oper ational s tate: Online , Offline , Diagnosti c , Dow n Adminis trati ve St ate Cur r ent s w itc h administr ati ve s tate Conf igur ed Admin S tate S w itch admini strati v e stat e that is stor ed in the sw itc h confi gur ation Beacon St[...]

  • Seite 62

    62 User Log in User Name Account name Log i n Leve l Aut ho rit y l evel Super Us er Super u ser pr iv ileges ena bled/disabled User Authenticati on Enabled En f or cement of accoun t names and author ity (alw ay s T rue) Fi r mw a re Firmware V ers ion Active firmware ve rsio n Inacti ve F irm war e V ersi on Not applic able . P ending F irm war e[...]

  • Seite 63

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 63 SNMP En abled SNMP enabled or disabled . Zo n e s / S e cu r i t y Inter op Mode Inter opera bility mode. Use S tandar d to connect to FC-S W- 2 complian t sw itc hes and McD A T A sw itc hes in Open F abr ic Mode . Use McD A T A F abr ic Mode to connect to McDA T A sw itc hes in M[...]

  • Seite 64

    64 P or t perfor mance statis tics The P ort St atistic s data windo w displa y s port per f ormance data f or the selec ted ports. Cli ck the Po r t S t a t s data w indow ta b in the faceplate displa y to open the P ort Statisti cs data w indow . See ” P ort statisti cs data win d ow ” on page 8 8 for a des cr iption of the P ort Statis tics [...]

  • Seite 65

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 65 Co nf igur ing port thr eshold alar ms IMP O RT A NT : P ort thre shold alarms can be managed onl y with Elemen t Manager , whic h r equir es the Element Manager PFE k ey , and the CLI. See ” Installing Pr oduct F eature Ena blement k ey s ” on page 8 2 for mor e infor mation a[...]

  • Seite 66

    66 NO TE: T he s witc h w ill do wn a port if a rising tr igge r alarm is not c lear ed after three consec uti v e sample win d ows. Fig ur e 29 P ort thre shold alarm e xample 8. Enter a sam ple windo w in seco nds. T he sample w indo w def ines the peri od of time in w hic h to count even t s. 9. Repeat s teps 3 thr ough 7 f or each alarm y ou w [...]

  • Seite 67

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 67 R ese tting a s w itc h Re setting a sw itch r eboots the sw itc h using conf igur ation par ameter s in memory . Depending on the res et type , a s w itch r es et may or ma y not inc lude a P ow er -on Self T est (P OS T) , or it may or ma y not disr upt tr affi c. Ta b l e 9 desc[...]

  • Seite 68

    68 Con figu rin g a sw i tch Y ou can conf igur e a s w itch e xplic itly or y ou can use the C onfi gurati on W i z ard . T he Conf igur ation W i z ar d is a ser ies of di alogs that guide y ou thr ough the cha ssis, netw ork , and SNMP conf igur ati on step s on new or replac ement switc hes. Select Wi zards > Configur ation Wiz ard to launc [...]

  • Seite 69

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 69 Domain ID and domain ID lock The domain ID is a uniq ue F ibre C hannel identif ier f or the s w itch . The F ibre Channe l addres s consists of the domain ID , port ID, and the A rbitr ated L oop Ph ysi cal Addr ess ( ALP A). S wit ches come fr om the fact ory with the Domain ID L[...]

  • Seite 70

    70 Ta b l e 1 0 lists the corr esponding domain ID v alues f o r each inter o p mode: S tandard mode and McD A T A F abr ic mode . Sys l o g The S y slog (Remote L ogging) featur e enables sav ing of the log infor mation to a r emote ho st that supports the s ysl og pro tocol. Whe n enabled, the log en tri es ar e sent to the s y slog host at the I[...]

  • Seite 71

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 71 S w itch a dmi nistrative states The s w itc h administr ati v e state de termi nes the oper atio nal state of the s wi tch . T he sw itch administ rati ve state e x ists in two f orm s: the confi gured adminis trati v e state and the c urr ent administr ati ve s tate . • The con[...]

  • Seite 72

    72 F abr i c Dev ice Management I nterf ace F abr ic Dev ice Management Interface (FDMI) pr o vi des a means to gather and displa y dev i ce infor mation fr om the f abri c, and allo w s FDMI capable dev i ces to r egister certain inf ormatio n with the f abri c, if FDMI is enabled . McDA T A W eb Server or Element Manager w ill r epor t an y and a[...]

  • Seite 73

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 73 Timeout v alues The s w itc h timeout v alues deter mine the timeout value s for all ports on the s w itc h. Ta b l e 1 2 desc r ibes the s wit ch timeout par ameters. The timeout val ues must be the s ame for all s w itche s in the fabr ic . NO TE: Mi smatched timeout v alues w il[...]

  • Seite 74

    74 Use ca ution w hen disabling the Embedded GUI, GUI Mgmt , T elnet, S SL , and S SH, as it is pos sible to disable all acces s to the s w itch e x cept thr ough a ser ial connecti on . IMP O RT A NT : T he S SL and S SH serv ices can be managed o nly w ith Element Manager , whic h r equir es the Element Manager PFE k ey , and the CLI. See ” Ins[...]

  • Seite 75

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 75 Networ k pr operties Use the Networ k Properties di alog show n in Fi g u re 33 to change IP conf igur atio n paramet ers . T o open the Networ k Pr operties dialog, c hoose one of the f ollo wing: • Select Swi t c h > N e t wor k Pro p er t i es . • R ight-cli ck a s w itch[...]

  • Seite 76

    76 SN M P p rop e r t i es Use the S NMP Properties dialog sho w n in Fi g u re 34 to change S NMP confi gurati on paramet ers. After ma ki ng ch an ge s, cl ick t he OK button to put the ne w value s into effec t. T o open the SNMP Pr operties dialog , choo se one of the fo llow ing: • Select Swi t c h > S NM P Pro p er t i es . • R ight-cl[...]

  • Seite 77

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 77 S NMP confi gur atio n The S NMP confi gur ation def ines ho w authenti cation tr aps ar e managed . Ta b l e 1 4 desc ribes the S NMP confi gur ation par ameter s. T he illegal char acter s for the us er-de fined f iel ds are the pound si gn (#) , semi-colon (;), and comma (,) . S[...]

  • Seite 78

    78 Archivin g a sw i tch Y ou can c reat e an .XML arc hiv e f ile containing the conf igur ation par ameter s. Basi cally an y data r ecei ved by McD A T A W eb Se r v er is ar chi ved . This ar c hiv e file can be u sed to r estor e the conf igur atio n on the same s witc h or on a r eplacement s w itch . Y ou can also u se the ar chi ve f ile as[...]

  • Seite 79

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 79 R est or ing a s w itc h Re stor ing a sw itc h loads the ar chi ved s w itc h confi gurati on paramet ers to the s w itch . The s w itch confi gur ation mu st be ar c hiv ed bef or e it can be r est ored . T he sw itc h ar chi v e must be compatible w ith the s witc h to be r esto[...]

  • Seite 80

    80 4. T o res tor e all conf igur ation s ettings, c lic k the Fu ll Restore tab , then clic k Restore . T o r estore sele cted confi gur ation s ettings, c lic k the Selectiv e Restor e tab and select one o r more of the follo w ing options , then cli ck Resto re : • Netw ork Pr ope rtie s —Res tor es all settings pres ented in the Networ k pr[...]

  • Seite 81

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 81 Do w nloading a suppo r t f ile The Dow nload Support File option ass embles all log f iles and s wit ch memory data into a cor e dump f ile ( dump_support.tgz) . This file can be s ent to tec hnical suppo rt p er sonnel fo r tr oubleshooting s w itch pr oblems . T o creat e a supp[...]

  • Seite 82

    82 Installing Pr oduct F eature Enablement k e y s A PFE k ey is a pass w or d that yo u can purc hase f rom y our sw itch dist ribut or or author i z ed r esell er that enables partic ular fe ature s in yo ur sw itc h . The fol low ing PFE k e ys ar e a vailabl e: • S ANtegr ity Enhanced PFE ke y enables de v ice sec ur ity on the s w itch . Thi[...]

  • Seite 83

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 83 Installing f irm war e Installing f irm w ar e inv olv es loading , unpacking , and acti vating the fir mw ar e image on the s wit ch . McD A T A W eb Ser v er does this in one operati on. T o pr ov ide co nsistent perf ormance thr oughout the f abr ic , ensur e the fo llo wing: ?[...]

  • Seite 84

    84 Displa y ing har d w ar e st atus T o display a summary of the har dw ar e status inf ormati on in a popup te xt box , r est the c ursor o v er the cha ssis LED c lust er in the facepl ate displa y . • P ow er LED—Indicat es the volt age status o f the sw itc h. • Heartbeat LED—Indicates the gener al statu s of the internal s w itc h pr [...]

  • Seite 85

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 85 4 Managing ports The dat a windo w s pro v ide port info rmation and port st atistics f or se lected ports. T his secti on desc ribe s the fo llow ing tasks that manage ports and dev ices: • P ort infor mation data w indo w , page 8 5 • P ort statisti cs data w indo w , page 88[...]

  • Seite 86

    86 The P ort Inf ormati on data w indow en tri es are lis ted belo w in Ta b l e 1 7 . T able 17 P ort informati on data w indo w entri es Entry Desc ription Summary P ort Addre ss P ort Fibr e Channel addr ess . Adminis trati v e P ort T ype The adminis trati v e port t ype (G , GL, F , FL) . This v alue is persist ent; it w ill be maintained dur [...]

  • Seite 87

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 87 Advan ce d MF S Mode Multiple F r ame Sequence bundling s tatus. I/O Str eam Guar d Not appli cable Dev ice S can Dev ice s can status . Enabled means the sw itc h quer ies the connected de vi ce during login f or FC- 4 desc r iptor info rmatio n. Au to P erformance T uning Enables[...]

  • Seite 88

    88 Po r t s t a t i s t i c s d a t a w i n d o w The P ort St atistics dat a windo w , sho w n in Fi g u re 4 0 , display s st atistics about port perfor mance . Select one or mor e ports in the f aceplate displa y that you w ant to v ie w statis tics . Cli ck the Po r t S t a t s d ata window tab to open the P or t Statistics window . Fig ur e 4 [...]

  • Seite 89

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 89 BB_Cr editReco v eryFr ameF ailur e Number of times mor e frames w er e los t during a c redit r e co very per iod than the r eco very pr ocess co uld r esol ve . This caus es a L ink Re set to r eco ver the c r edits. B B_ C re d i t Re c ove r y R R D Y Fai l u re N u m b e r of [...]

  • Seite 90

    90 LIP(f7 ,f7) A loop initiali z ati on primiti v e fr ame used to acq uir e an AL_P A. LIP(f8,AL_P S) This LIP denotes a loop failur e detected by the L_port identif ied b y AL_P S . LIP(f8,f7) A loop initiali z ati on primiti ve fr ame used to indi cate that a Loop F ailure has been dete cted at its rece iv er and does not ha ve a v alid AL_P A. [...]

  • Seite 91

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 91 V ie w ing and conf igur ing ports P ort color and te xt pro v ide inf ormati on about the port and its oper ational s tate . T o display port number and status inf or mation f or a port , position the c u rs or ov er a port on the faceplate dis play . T he status infor mation chan[...]

  • Seite 92

    92 Po r t s t a t e s The port administr ati ve st ate deter mines the operati onal stat e of a port. T he port administrati v e state has two f orms: the conf igur ed administr ati ve s tate and the c urr ent administr ati ve s tate . Ta b l e 1 9 descr ibes the port administr ativ e and oper ational st ates. • The conf igur ed administr ati ve [...]

  • Seite 93

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 93 Po r t t y p e s The e xternal por ts can be configured to self-discov er the proper type to match the devi ce or sw itch to w hich it is connect ed. Ta b l e 2 0 lists the possible port types and the ir meanings. NO TE: Int ernal ports can be F_P ort or FL_P ort only . P ort types[...]

  • Seite 94

    94 P or t speeds External ports ar e capable of tr ansmitting and rece iv ing at 1-Gbps , 2 -Gbps , or 4 -Gbps. Inter nal ports are capa ble of tr ansmitting and r ece i v ing at 1-Gbps o r 2 -Gbps . T he ports can be conf igur ed for e ither tr ansmission speed or to sens e the transmissi on speed of the dev ice to whi ch i t is connected . Ta b l[...]

  • Seite 95

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 95 Po r t b i n d i n g IMP O RT A NT : P ort binding is a vail able only in Ele ment Manager w hich r equire s the Element Manager PFE key . Se e ” Installing Pr oduct F eatur e Enablement k e y s ” on page 8 2 for mor e info rmation a bout installing a PFE k ey . T o obtain the [...]

  • Seite 96

    96 • SerDes leve l (internal) —The S erDes le vel t est v erif ie s port cir c uitry . The Ser Des lev el tes t sends a tes t fr ame fr om the A SIC through the SerDes c hip and back to the AS IC for the selected ports. The port passe s the test if the fr ame that w as sent b y the A SIC matche s the test f rame that w as r ecei ved . T his tes[...]

  • Seite 97

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 97 Gl ossa r y Active firmwar e The f irm w ar e image on the sw itc h that is in use Active zone set The z one set that defi nes the cur r ent z oning f or the fabr ic Activity LED A po rt LED that indicates w hen fr ames ar e enter ing or leav ing the port Administrativ e state Stat[...]

  • Seite 98

    98 Fabric v iew file A file containing a s et of fa bri cs that wer e opened and sa ved dur ing a pre v ious McDA T A W eb Ser ver session Fan F ail LED An LED that indicate s that a cooling fan in the sw itc h is operating belo w standar d Fla sh m em or y Memory on the s w itch that contains the c hassis contr ol fir mw ar e For ce PRO M m o de S[...]

  • Seite 99

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 99 Principal switch T he sw itc h in the fabr ic that manage s domain ID assignmen ts Product Featur e Enablement k ey A pass w or d that you can pur cha se fr om y our s w itch distr ibutor o r author i z ed r eseller to enable partic ular featur es in y our sw itch SFP Small F orm-F[...]

  • Seite 100

    100[...]

  • Seite 101

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 101 Inde x A active zone set 38 , 44 Active Zoneset data window 44 administrative state configured 71 , 92 current 71 , 92 port 92 switch 71 alarm configuration 65 archive configuration 78 audience 7 authentication device 54 trap 77 user 54 authorized reseller, HP 9 auto save, zoning [...]

  • Seite 102

    102 Fabric Device Management Interface 72 factory defaults 80 FC-4 desc riptor 94 FDMI - See Fabric Device Mana gement Interface File Transfer Protocol 74 firmwa re install with McDATA Web Server 83 non-disruptive activation 83 FL_Port 93 G gateway address 75 generic port 93 graphic window 19 group add member 27 create 26 display 28 display member [...]

  • Seite 103

    McDATA® 4Gb SA N Switch for HP p-Cla ss BladeSystem u ser guide 103 Q QuickTools 15 R RADIUS - See Remote Authentication Dial-In User Service read community 77 refresh 59 related d ocumentati on 7 Remote Authentication Dial-In User Service add server 55 authentication order 58 description 22 edit configuration 57 remove server 56 remote logging 70[...]

  • Seite 104

    104 W web server se rvice 74 web sites HP documentation 7 HP storage 10 HP Subscriber’s choice 9 wizard, configuration 68 working directory 14 workstation requirements 12 write community 77 Z zone add member port 47 definition 37 remove member port 47 rename 47 zone merge description 48 failure 48 failure reco very 48 zone set activate 45 active [...]