HP (Hewlett-Packard) TX1000 Bedienungsanleitung

HP Pavilion tx1000 Entertainment PC Maintenance and Service Guide[...]

© Copyright 2007 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. AMD, Turion, and combinations thereof are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by it s proprietor [...]

Table of contents 1 Product description 2 External component identification Top compo nents ........ ........................ ....................... ........................ .................... ............. ...... 4 Pointing d evices ... .......... ........... .......... ........... ........ .......... ........... .......... ........... ........[...]

Battery ......... .......... ........... .......... ........... ........ ........... .......... .......... ........... ......... ..... 36 Pen ............... ............ .......... ........... ............... ............ ........... ............ .............. ........ 37 Hard drive ... ........................ ..................... .............[...]

Phillips PM 2.0×4.0 screw ............ ................ ................ ................ ................ ............... ........... . 93 Phillips PM2.0×4.0 captive screw ... ......... ........... ......... ......... ......... ........... ......... ......... ........... .. 9 7 Phillips PM2.0×11.0 screw . .......... ........ ........ ..........[...]

1 Product description Category Description Full- featured models Defeatured models Product Na me HP Pavilion tx10 00 Entertainment PC √ √ Processo rs AMD Turion™ 64 Mobile Technology TL-60 (2.0-GHz, 1-MB L2 cache) √ √ TL-56 (1.8-GHz, 1-MB L2 cache) √ √ TL-52 (1.6-GHz, 1-MB L2 cache) √ √ TL-50 (1.6-GHz, 512-KB L2 cache) √ √ MK-[...]

Category Description Full- featured models Defeatured models 60-GB, 5400-rpm √ √ Optical drives ● 12.7-mm tray load ● Parallel ATA √ √ DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe √ √ DVD±RW and CD-RW Super Mult i Double-Layer Combo Drive √ √ Web camera 1.3-megapixel camera - fixed (no tilt) √ √ D[...]

Category Description Full- featured models Defeatured models S-Video-out √ √ USB (3) √ √ VGA (Dsub 15-pin) √ √ 2-pin AC power √ √ Dockin g Docking support √ √ Keyboar d/ pointi ng de vices 12.1-inch keyboard with embedded numeric keypad √ √ TouchPad with 2 buttons and two-way scroll √ √ Touchscreen pen √ √ Power requ[...]

2 External component identification Top components Pointing devices Item Component Function (1) TouchPad on/off button Enables/disables the TouchPad. (2) TouchPad* Moves the pointer and selects or activates items on the screen. (3) Left and right TouchPad buttons* Function like the left and righ t buttons on an external mouse. (4) TouchPad light ?[...]

Keys Item Component Function (1) esc key Displays system information when pressed in comb ination with the fn key. (2) fn key Executes frequently used system funct ions when pressed in combination with a function key or the esc key. (3) Windows logo key Displays the Windows® Start menu. (4) Windows applications key Displays a shortcut menu for ite[...]

Display components Item Component Function (1) Internal microphones Record sound. (2) Integrated camera (select models only) Records video and captures still photographs. (3) Display release latch Opens the computer. (4) DVD button Opens DVD software. ● When the computer is on, press the bu tton to open the default DVD program and start a DVD in [...]

Item Component Function (6) Mobility Center button Opens Mobility Center. (7) Rotate button Rotates the screen image clockwise into 4 orientations: landscape primary, landscape secondary, portrait primary, and portrait secondary. (8) Convertible hinge Swivels the display and converts the computer from traditional notebook mode into slate mode or vi[...]

Front components Item Component Funct ion (1) Display release latch Opens the computer. (2) Power switch* ● When the computer is off, slide the power s witch to the right to turn on the computer. ● When the computer is on, slide the power switch to the right to initiate Sleep. ● When the computer is in the Sleep s tate, slide the power switch[...]

Item Component Function (9) Wireless light ● Blue: An integrated wireless device, such as a wireless local area network (LAN) device and/or a Bluetooth® device, is turned on. ● Amber: All wireless devices are turned o ff. *This table describes factory settings. For information about changing factory settings, refer to the user guides located i[...]

Item Component Function (11) S-Video-out jack Connects an optional S-Video device such as a television, VCR, camcorder, overhead projector, or video capture card. (12) Vent Enables airflow to coo l internal components. CAUTION: To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow anot her hard s[...]

Rear components Item Component Function (1) Vent Enables airflow to cool internal components. CAUTION: To prevent overheating, do not obstruct vents. Use the comp uter only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface , such as pill ows or thick rugs or clothing, to block airfl[...]

Bottom components Item Component Function (1) Vents (6) Enable airflow to cool internal components. CAUTIO N: To prevent overheating , do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printe r, or a soft surface, such as pillows or thick rugs or clothing, to block[...]

Item Component Function NOTE: To prevent an u nresponsive system and the display of a warning message, replace with only a wireless module device aut horized for use in the computer by the governmental agenc y that regulates wireless devices in your country or region. If you replace the device and then receive a warning message, remove the device t[...]

3 Unknown user password If the computer you are servicing has an unknown user password, follow these steps to clear the pas sword. NOTE: These step s also clear CMOS. Before di sassembling the compu ter, follow th ese steps: 1 . Shut down the computer . If you are unsure wh ether the computer is off or in Hibern ation, turn the computer on, and the[...]

4 Illustrated parts catalog Serial number location When ordering parts or requesting information, pr ovide the computer serial number and model number located on the bottom of the computer. ENWW Serial number location 15[...]

Computer major components Item Description Spare part number (1a) Display assemblies 12.1-inch, WXGA, BrightView, touch screen display assembl y with Web camera, fingerprint reader, and WWAN and WLAN antenna cables 441114-001 16 Chapter 4 Illustrated parts ca talog ENWW[...]

Item Description Spare part n umber 12.1-inch, WXGA, BrightView, tou ch screen display assembly with Web cam era and WWAN and WLAN antenna cables 441112-001 12.1-inch, WXGA, BrightView, touch scr een display assembly with fingerprint reader and WWAN and WLAN antenna cables 441113-001 12.1-inch, WXGA, BrightView, tou ch screen display assembly with [...]

Item Description Spare part number Italy 441316-061 Japan 441316-291 Korea 441316-AD1 Latin America 441316-161 Saudi Arabia 441316-171 Spain 441316-071 Taiwan 441316-AB1 The United Kingdom 441316-031 The United States 441316-001 Windows XP keyboards for u se in the following countries or regions: Brazil 441133-001 Canada 441133-DB1 Europe 441133-02[...]

Item Description Spare part n umber AMD Turion 64 Mobile Technology TL-60 (2.0-GHz, 1-MB L2 cache) 436257-001 AMD Turion 64 Mobile Technology TL-56 (1.8-GHz, 1-MB L2 cache) 431373-001 AMD Turion 64 Mobile Technology TL-52 (1.6-GHz, 1-MB L2 cache) 431372-001 AMD Turion 64 Mobile Technology TL-50 (1.6-GHz, 512-KB L2 cache) 431371-001 AMD Turion 64 Mo[...]

Item Description Spare part number 802.11a/b/g WLAN module for use in the following coun tries or regions. These countries or regions are categorized as the res t of the world (ROW): China, Ecuador, Haiti, Honduras, Pakistan, Peru, Qatar, South Korea, Uruguay, Venezuela 407160-002 802.11a/b/g WLAN module for use in Japan. 407160-291 802.11b/g WLAN [...]

Item Description Spare part number (3) Web camera module 441120-001 (4) Display inverte r (includes Mylar shield 441119-001 (5) Display panels (include dis play panel cabl e, Web camera cable, and fingerprint reader cable) For use only with computer models equ ipped with touch screen display as semblies 441759-001 For use only with computer mod els[...]

Plastics Kit Item Description Spare part number Plastics Kit 441138-001 (1) ExpressCard slot bezel (2) Display connector cover (includes 1 c aptive screw, secured by a C-clip) (3) WLAN module compartment co ver (inclu des 1 captive screw, secured by a C- clip) (4) Memory module compartm ent cover (inc ludes 2 captive screws, secured by C- clips) (5[...]

Mass storage devices Item Description Spare part number (1) Hard dr ives (all 5400-rpm, include frame and hard drive connector) 160-GB 441128-001 120-GB 441127-001 80-GB 441126-001 60-GB 441125-001 (2) Optical drives (incl ude bezel and bracket) DVD±RW and CD-RW Super Multi Double-L ayer Combo Drive with LightScribe 441130-001 DVD±RW and CD-RW Su[...]

Miscellaneous parts Description Spare part number 65-watt AC adapter 402108-001 ATSC/NTSC TV tuner antenna 439131 -001 ATSC/NTSC/PAL TV tuner 439130-001 DVB-T antenna adapter 412176-001 DVB-T tuner 412175-001 HP backpack 405527-001 HP carrying case 418162-001 HP Remote Control I II 435675-001 Infrared emitt er with cable 439129-001 Optical wired mo[...]

Description Spare part number ● Phillips PM2.0×4.0 screw ● Phillips PM2.0×3.0 screw USB digital drive 364727-002 Vista remote con trol 439128-001 Wired headset with volume control 371693-001 Wireless lase r mouse 430958-001 Sequential part number listing Spare part number Description 364727-002 USB digital drive 371693-001 Wired headset with [...]

Spare part number Description 412175-001 DVB-T tu ner 412176-001 DVB-T antenna adapter 412390-001 RTC battery 412766-002 Bluetooth module (includes Bluetoo th module cable) 418162-001 HP carrying case 430958-001 Wireless laser m ouse 431371-001 AMD Turion 64 Mobile Tech nology TL-50 processor (1.6 -GHz, 512-GB L2 cache) 431372-001 AMD Turion 64 Mob[...]

Spare part number Description 441111-001 12.1-inch, W XGA, BrightView, touch screen displa y assembly with WWAN and WLAN antenna cables 441112-001 12.1-inch, W XGA, BrightView, touch screen displa y assembly with Web camera and WWAN and WLAN antenna cables 441113-001 12.1-inch, W XGA, BrightView, touch screen displa y assembly with fingerprint read[...]

Spare part number Description 441137-001 Base enclosure for u se only with computer m odels not equipped with WWAN 441138-001 Plastics Kit (in cludes ExpressCard slot bezel, displa y connector cover, WLAN module compartmen t cover, memory module compartment co ver, and hard drive cover) 441139-001 Rubber Feet Kit (includes 3 base enclosure rubber f[...]

Spare part number Description 441406-001 PC2-5300, 667-MHz, 102 4-MB, 1-DIMM memory modu le 441758-001 Display panel for us e only with computer m odels not equipped with touch screen display assemblies (includes display panel cable, Web camera c able, and fingerprint reader cable) 441759-001 Display panel for use only with compu ter models equi pp[...]

5 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to comple te the removal and replacement procedures: ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers ● Flat-bladed screwdriver Service considerations The following sections include some of the consi derations tha[...]

Cables and connectors CAUTION: When servicing the computer, be sure th at cables are placed in their proper locations during the re assembly process . Improper cable placement can damage the computer. Cables mus t be handled wi th extreme care t o avoi d damage. Apply only the tension required to unseat or seat the cables during removal and inserti[...]

Grounding guidelines Electrostatic di scharge da mage Electronic components are sensitiv e to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sens itivity. Networks built into man y integr ated circuits provide some protection, but in many cases, ESD cont ains enough power to alter device parameters or melt sil[...]

Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand co ntact, transport pr oducts in static-safe tube s, ba gs, or boxes. ● Protect ESD-sensitive part s and assemblies with co nductive or ap proved containers or packaging. ● Keep ESD-sensitive parts in their contai[...]

Equipment guidelines Grounding equipment must include either a wrist st rap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connec ted to a gr ou nded system. Wrist stra ps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly a gainst the [...]

Component replacement procedures This chapter provides remova l and replacement procedures. There are as many as 65 screws, in 10 different size s, that must be removed, replaced, or loosened when servicing the computer. Make spec ial note of each screw size an d location during removal and replacement. Serial number Report the computer serial numb[...]

Battery Description Spare part number 6-cell, 2.55-Ah battery 441132-001 4-cell, 2.55-Ah battery 441131-001 Before di sassembling the compu ter, follow th ese steps: 1 . Shut down the computer . If you are unsure wh ether the computer is off or in Hibern ation, turn the computer on, and then shut it down through the o perating system. 2 . Disconnec[...]

Pen Description Spare p art number Pen 441147-001 Before removing the pen, follow these steps: 1 . Shut down the computer. I f you are unsure whether the computer is off or in Hibernation, tur n the computer on, and then shut it down through the operating system. 2 . Disconnect all external device s connected to the computer. 3 . Disconnect the pow[...]

Hard d rive Description Spare part n umber 5400-rpm, 160-GB 441128-001 5400-rpm, 120-GB 441127-001 5400-rpm, 80-GB 441126-001 5400-rpm, 60-GB 441125-001 Before removing the hard drive, follow these step s: 1 . Shut down the computer . If you are unsure wh ether the computer is off or in Hibern ation, turn the computer on, and then shut it down thro[...]

6 . Remove the hard drive (2) from the hard drive bay. 7 . If it is necessary to remove the hard drive bracke t and connector, remove the fou r Phillips PM 3.0×3.0 hard drive bracket screws (1) from each side of the har d drive. 8 . Lift the bracke t (2) straight up to remove it from the hard drive. 9 . Remove the connector (3) from of the hard dr[...]

WWAN module Description Spare part n umber WWAN module 442023-001 Before removing the WWAN module, follow these steps: 1 . Shut down the computer . If you are unsure wh ether the computer is off or in Hibern ation, turn the computer on, and then shut it down through the o perating system. 2 . Disconnect all external device s connected to the comput[...]

Computer feet Description Spare p art number Rubber Feet Kit (includes 3 base enclosure ru bber feet, 2 top cover bumper pads, 8 display bezel screw covers, pen cover, and WWAN anten na cover) 441139-001 The computer feet are ad hesive-backed rubber pads. ENWW Component replacement procedures 41[...]

Optical drive NOTE: All optical drive spare part kits include an optical drive bezel . Description Spare part n umber DVD±RW and CD-RW Super Multi Double-L ayer Combo Drive with LightScribe 441130-001 DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 441129-001 Before removing the optical dr ive, follow thes e steps: 1 . Shut down the compute[...]

Memory module Description Spare p art number 1-DIMM, PC2-5300, 6 67 MHz, 1024-MB 441406-001 1-DIMM, PC2-5300, 667 M Hz, 512-MB 441405-001 Before removing the memory module, follow these steps: 1 . Shut down the computer. I f you are unsure whether the computer is off or in Hibernation, tur n the computer on, and then shut it down through the operat[...]

6 . Pull the module (2) away fro m the socket at an angle a nd remove it. NOTE: Memory modules are de signed with a notch (3 ) to prevent incorrect installation into the memory module socket. Reverse this procedure to install a memory module. WLAN module Description Spare part n umber 802.11a/b/g WLAN module for use in Canada and the United States [...]

Remove the WLAN module: 1 . Position the computer wi th the front toward you. 2 . Loosen t he Phil lips PM 2.0×4.0 screw (1) that secures the WLAN modu le compar tment co ver to t he computer. 3 . Lift the right side of the WLAN module compartment cover (2) and swing it to the left. 4 . Remove the WLAN module compartment cover. NOTE: The WLAN modu[...]

7 . Pull the WLAN module (3) away from the socket at an angle and remove it. NOTE: WLAN modules are designed with a notch (4) to prevent incorrect installation into the WLAN module socket. Reverse this procedure to install a WLAN module. 46 Chapter 5 Removal and replacement procedures ENWW[...]

Keyboard Description Windows Vista keyboards Country or region Spare part number Country or regi on Spare part number Brazil Denmark, Norway, and Sweden Europe France French Canada Germany Italy Japan 441316-201 441316-DH1 441316-021 441316-051 441316-121 441316-041 441316-061 441316-291 Latin America Korea Saudi Arabia Spain Taiwan The United King[...]

2 . Remove th e four Phillips PM2 .0×11.0 scr ews that secure the keyboa rd to the computer. 3 . Turn the computer display-side up, with the front toward you. 4 . Open the computer. 5 . Lift the rea r edge of the keyb oard and sw ing it toward you until it rests on the palm rest. 48 Chapter 5 Removal and replacement procedures ENWW[...]

6 . Release th e zero insertio n force (ZIF) connector (1) to which the ke yboard cable is attached and disconnect the keyboard ca ble (2) . 7 . Remove the keyboard. Reverse this procedure to install the keyboard. ENWW Component replacement procedures 49[...]

Switch cover Description Spare part n umber Switch cover (includes display convertible hing e base cover) 441135-001 Before removing the s witch cover, follow these step s: 1 . Shut down the computer . If you are unsure wh ether the computer is off or in Hibern ation, turn the computer on, and then shut it down through the o perating system. 2 . Di[...]

5 . Rotate the display clockwise approximately 45 degrees. 6 . Lift the left and right front corners of the switch cover (1) until it disengages from the computer. 7 . Rotate the switch cover (2) coun terclockwise and remo ve it from the computer. Reverse this procedure to install the switch cover. ENWW Component replacement procedures 51[...]

Display assembly Description Spare part n umber 12.1-inch, WXGA, BrightView, touch screen display assembly with Web camera, fingerprint reader, and WWAN and WLAN antenna cables 441114-001 12.1-inch, WXGA, BrightView, touch screen display assembly with Web camera and WWAN and WLAN antenna cables 441112-001 12.1-inch, WXGA, BrightView, touc h screen [...]

7 . Remove the WLAN module compartment cover and di sconnect the wireless antenna cables from the WLAN module (see WLAN module on page 44 ). 8 . Remove the fo llowing compon ents:. a . Keyboard (see Keyboard on page 47 ) b . Switch cover (see Switch cover on page 50 ) Remove the display assembly: 1 . Close the computer and turn it upsi de down, wit[...]

7 . Disconnect the display assembly cables (2) and (3) from the system board. 8 . Turn the computer display-side up, with the front toward you. 9 . Open the computer. 10 . Remove the display convertible hinge cover (1) . 11 . Remove t he two Philli ps PM2. 5×6.0 screws (2) that secure the display assembly to the computer. 12 . Disconnect the displ[...]

13 . Lift the display (2) straight up and remove it. 14 . If it is necessary to replace any of the display assembly internal components, remove the four round rubber screw covers (1) and the four rectangular rubber screw covers (2) . NOTE: The display bezel rubber screw covers are available in the Rubbe r Feet Kit, spare part number 441139-001 . EN[...]

15 . Remove t he eight Ph illips PM 2.0×7.0 s crews that secure the displa y bezel to the display assembly. NOTE: All screws used to secure display assem bly internal su bcomponen ts are availa ble in the Di splay Sc rew Kit , spar e part number 441124-001 . 16 . Flex the insi de edges of the right s ide (1) of the display bezel and the inside edg[...]

18 . Disconnect the fingerprint reader board cable (1) from the fingerprint reader board. 19 . If it is necessary to replace the fingerprint re ader board, remove the Phillips PM2.0×4.0 screw (2) that secures the finger print reader bo ard and bracket to the display bezel. 20 . Remove the fingerprint reader board bracket (3) . 21 . Lift the left s[...]

25 . If it is necessary to replace the We b camera, disconnect the camera cable (1) from the camera module. 26 . Remove the camera module (2) from the display enclosure. NOTE: The Web camer a is available using spa re part number 4 41120-001 . 27 . If it is necessary to replace the dis play LED bo ard, remove the two Phil lips PM2. 0×4.0 screw s ([...]

32 . Release the display QuickPlay board (2) as far as the disp lay QuickPlay board cable will allow. 33 . Disconnect the display QuickPlay board ca ble (3) from the display QuickPlay board. NOTE: The display Quic kPlay board is avai lable in using spare part number 441122-001. 34 . Remove the display QuickPlay bo ard from the dis play enclosure. R[...]

e . Switch cover (see Swit ch cover on page 50 ) f . Display assembly (see Display assembly on page 52 ) Remove the top cover: 1 . Turn the computer upside down , with the front toward you. 2 . Remove the f ive Phi llips PM 2.0×7.0 screws (1) and the three Phillips PM2.0×4.0 screws (2) that secure the top cover to the computer. 3 . Turn the compu[...]

7 . Lift the top cover straight up and remove it. Reverse this procedure to install the top cover. ENWW Component replacement procedures 61[...]

RTC battery Description Spare part n umber RTC battery 412390-001 Before removing the RTC battery, follow these steps: 1 . Shut down the computer . If you are unsure wh ether the computer is off or in Hibern ation, turn the computer on, and then shut it down through the o perating system. 2 . Disconnect all external device s connected to the comput[...]

Power switch assembl y Description Spare p art number Power switch assembly (incl udes power switch board cable and actuator switch) 441142-001 Before removing the power switch assembly, follow these steps: 1 . Shut down the computer. I f you are unsure whether the computer is off or in Hibernation, tur n the computer on, and then shut it down thro[...]

3 . Remove the display release hook assembly (3) . NOTE: The display release ho ok assemblies are included with the base e nclosure spare part kits. 4 . Disconnec t the power switch bo ard cable (1) from the system board. 5 . Remove the powe r switch boar d (2) and power switch ac tuator (3) from the base enclosure. Reverse this procedure to instal[...]

Bluetooth module Description Spare p art number Bluetooth module (includes Bluetooth module cable) 412766-002 Before removing the Bluetooth module, fo llow these steps: 1 . Shut down the computer. I f you are unsure whether the computer is off or in Hibernation, tur n the computer on, and then shut it down through the operating system. 2 . Disconne[...]

System board Description Spare part n umber For use only with computer model s equipped with WWAN 441097-001 For use only with computer models not equipped with WWAN 441096-001 When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory [...]

3 . Remove the ExpressCard slot bezel (4) from the ExpressCard slot. NOTE: The ExpressCard slot be zel is included in the Plastics Kit, spare par t number 441138-001. 4 . Use the optical drive connecto r (1) to lift the left side of the s ystem boar d (2) until the power connector (3) is clear of the b ase enclosure. 5 . Pull the system bo ard (4) [...]

Pen holder Description Spare part n umber Pen holder 441146-001 Pen eject assembly 441145-001 Before removing the pen holder, follow these steps: 1 . Shut down the computer . If you are unsure wh ether the computer is off or in Hibern ation, turn the computer on, and then shut it down through the o perating system. 2 . Disconnect all external devic[...]

4 . Remove the pen holder (4) . Reverse this procedure to install the pen h older. Audio/infrared board Description Spare p art number Audio/infrared board (includes au dio/infrared board cabl e) 441144-001 Before removing the audio/in fr ared board, follow these steps: 1 . Shut down the computer. I f you are unsure whether the computer is off or i[...]

i . System board (see System board on pag e 66 ) j . Pen holder (see Pen holder on page 68 ). Remove the audio/infrared board: 1 . Remove the two Ph illip s PM2.0× 5.0 scre ws (1) that secure the audio/infrared board to the system board. 2 . Release the audio/infrared board (2) by sliding it away from you until the connectors on the front of the b[...]

d . Keyboard (see Keyboard on page 47 ) e . Switch cover (see Switch cover on page 50 ) f . Display assembly (see D isplay assembly on page 52 ) g . Top cover (see Top cover on page 59 ) h . Power switch assembly (see Power switch assembly on page 63 ) i . System board (see System board on page 66 ) Remove the WWAN antenna board: 1 . Remove the two[...]

Before removing the fan/heat si nk assembly, fo llow these steps: 1 . Shut down the computer . If you are unsure wh ether the computer is off or in Hibern ation, turn the computer on, and then shut it down through the o perating system. 2 . Disconnect all external device s connected to the computer. 3 . Disconnect the power cord. 4 . Remove the bat[...]

3 . Remove the fan/heat sink assembly (3) . NOTE: Due to the adhesive quality of the therma l paste and thermal pa ds located between the fan/heat sink assembly and system board co mponents, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. NOTE: The thermal paste and thermal pads should be thoroughly [...]

Processor NOTE: All processor spare part kits include thermal paste. Desription Spare part n umber AMD Turion 64 Mobile Technol ogy TL-60 processor (2.0-GHz, 1- MB L2 cache) 436257-001 AMD Turion 64 Mobile Technol ogy TL-56 processor (1.8-GHz, 1- MB L2 cache) 431373-001 AMD Turion 64 Mobile Technol ogy TL-52 processor (1.6-GHz, 1- MB L2 cache) 4313[...]

2 . Lift the processor (2) straight up and remove it . NOTE: The gold triangle (3) on the processo r should be aligned wi th the triangle (4) embossed on the processor socke t when you install th e processor. Reverse this procedure to ins tall the processo r. ENWW Component replacement procedures 75[...]

6 Setup Utility WARNING! Only authorized technicians trained by HP shoul d repair this equipment. All troubleshooting and repair pr ocedures are detail ed to allow repair at only the subassembly or module leve l. Because of th e complexity of th e individual bo ards and s ubassemblies, d o not attempt to make repairs at the component level or modif[...]

Changing the language of the Setup Utility The following procedure explains how to change the la ngua ge of the Setup U tili ty. If the Setup Ut ility is not already running, begin at step 1. If the Setup Utility is al ready running, begin at step 2. 1 . To start the Setup Utility, turn on or rest art the computer, and then press f10 while “Press[...]

Restoring default settings in the Setup Utility The following procedure explai ns how to restore the Setup Utility defaul t setting s. If the Se tup Utility is not already running, begin at step 1. If the Setu p Utility is already running, begin at step 2. 1 . To start the Setup Utility, turn on or restart the computer, and then press f10 while “[...]

Closing the Setup Utility You can close the Setup Utility wi th or without saving changes. ● To close the Setup Utility and save your changes fr om the curren t session, us e either of the following procedu res: ● Press f10 , and then follow the instructions on th e screen. — or — ● If the Setup Utility menu s are not visible, press esc t[...]

System Configuration menu Select To do this Language Support Change the Setup Utility lang uage. Enhanced SATA support (select mo dels only) Enable/disable enhanced SATA mode. Boot Options Set the following boot options: ● f10 and f12 Delay (sec. ) ― Set the delay for the f10 and f12 functions of the Setup Util ity in intervals of 5 seconds eac[...]

7 Specifications Computer specifications Metric U.S. Dimensio ns Height (front to back) 3.1 to 3.7 cm 1.18 to 1.34 in Width 30.6 cm 13.19 in Depth 22.4 cm 9.75 in Weight (with optical drive, hard drive, and battery) 1.93 kg 5.47 lbs Input powe r Operating voltage 18 .5 V dc @ 3.5 A - 65 W Operating current 3.5 A Temperature Operating (not writin g [...]

Metric U.S. Nonoperating 1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min sweep rate NOTE: Applicable product safety standards sp ecify thermal limits for plastic surfaces. The computer operates well within this range of temperatures. 12.1-inch, WXGA BrightView display specifications Metric U.S. Dimensions Height 16.2 cm 6.4 in Width 26.0 cm 10.2 [...]

Hard drive specifications 160-GB* 120-G B* 80-GB* 60-GB* Dimensio ns Height 9.5 mm 9.5 mm 9.5 mm 9.5 mm Width 70 mm 70 mm 70 mm 70 mm Weight 101 g 101 g 101 g 101 g Interface type ATA-7 ATA-7 ATA-7 ATA-7 Transfer rate Synchronous (maximum) 100 MB/sec 100 MB/sec 100 MB/sec 100 MB/sec Security ATA security ATA security ATA security ATA security Seek [...]

DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications Applicable disc Read: CD-DA, CD+(E)G , CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo- CD, Video CD), Multisession CD (Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R , CD-RW, DVD -ROM (DVD-5, DVD-9, DVD-10, DV D-18), DVD-R, DVD-RW, DVD+R, DVD+RW, [...]

System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller can use DMA 1, 2, or 5. ENWW System DMA specifications 85[...]

System interrupt specifications Hardware IRQ System function IRQ0 System timer IRQ1 Standard 101-/102-Key or Microsoft® Natural Keyboard IRQ2 Cascaded IRQ3 Intel 82801DB/DBM USB2 Enh anced Host Controller—24 CD IRQ4 COM1 IRQ5* Conexant AC—Link Audio Intel 82801DB/D BM SMBus Controller—24C3 Data Fax Modem with SmartCP IRQ6 Diskette drive IRQ7[...]

System I/O address specifications I/O address (hex) System function (shipping configur ation) 000 - 00F DMA controller no. 1 010 - 01F Unused 020 - 021 Interrupt controller no. 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 87334 “Super I/O” configuration for CPU 040 - 05F Counter/timer registers 044 - 05F Unused 06[...]

I/O address (hex) S ystem func tion (s hipping c onfigur ation) 220 - 22F Entertainment audio 230 - 26D Unused 26E - 26 Unused 278 - 27F Unused 280 - 2AB Unused 2A0 - 2A7 Unused 2A8 - 2E7 Unused 2E8 - 2EF Reserved serial port 2F0 - 2F7 Unused 2F8 - 2FF Infrared port 300 - 31F Unused 320 - 36F Unused 370 - 377 Secondary diskette drive controller 378[...]

System memory map specifications Size Memory address Syste m function 640 KB 00000000-0009FFFF Base memory 128 KB 000A0000-000BFFFF Video memory 48 KB 000C0000-000CBFFF Video BIOS 160 KB 000C8000-000E7FFF Unu sed 64 KB 000E8000-000FFFFF System BIOS 15 MB 00100000-00FFFFFF Extende d memory 58 MB 04800000-07FFFFFF Super extended memory 58 MB 04800000[...]

8 Screw listing This section provides specification and reference info rmation for the screws and screw locks used in the computer. All screws and screw locks li sted in this section are available in the Screw Kit , spare part number 441140-001, and the Disp lay Screw Kit, spare part number 441124-0 01. 90 Chapter 8 Screw listing ENWW[...]

Phillips PM2.0×5.0 captive screw Color Quantity Length Thread Head width Black 4 5.0 mm 2.0 mm 5.0 mm Where used: (1) Two screws (sec ured by C-clips) that secure the hard drive cover to the computer (see Hard drive on page 38 ) (2) Two screws (sec ured by C-clips) that secure th e memory module compartment cover to the computer (see Memory module[...]

Phillips PM3.0×3.0 screw Color Quantity Length Thread Head width Silver 4 3.0 mm 3.0 mm 5.0 mm Where used: 4 screws that secure the hard dr ive bracket to the hard drive (see Hard drive on page 38 ) 92 Chapter 8 Screw listing ENWW[...]

Phillips PM2.0×4.0 screw Color Quantity Length Thread Head width Black 23 4.0 mm 2.0 mm 5.0 mm Where used: (1) Two screws that secure the WWA N module to the computer (see WWAN module on page 40 ) (2) Two screws that sec ure the WLAN module to the computer (see WLAN module on page 44 ) Where used: One screw that secure s the fingerprint reader boa[...]

Where used: (1) One screw that secure s the display inverter to the display assembly (see Display assembly on page 52 ) (2) Two screws that se cure the displa y LE D board to the display assembly (see Display assembly on page 52 ) (3) Two screws that secure th e display Quic kPlay board to the display assembly (see Display assembly on page 52 ) Whe[...]

Where used: 3 screws that secure the power switch assemb ly and the display release hook to the base enclosure (see Power switch assembly on page 63 ) Where used: 3 screws that secure the pen eject assembly and the pen holder to the base enclosure (see Pen holder on page 68 ) ENWW Phillips PM2.0×4.0 screw 95[...]

Where used: 2 screws that secure the audio/infr ared board to the base enclosure (see Audio/infrared board on page 69 ) Where used: 2 screws that secure the WWAN external antenna board to the base enclosure (see WWAN external antenna board on page 70 ) 96 Chapter 8 Screw listing ENWW[...]

Phillips PM2.0×4.0 captive screw Color Quantity Length Thread Head width Black 2 4.0 mm 2.0 mm 4.0 mm Where used: (1) One screw (secure d by a C-clip) that secure s the WLAN module cover to the computer (see WLAN module on page 44 ) (2) One screw (secured by a C-clip) that secures the display connect or cover to the computer (see Di spla y assembl[...]

Phillips PM2.0×11.0 screw Color Quantity Length Thread Head width Black 4 11.0 mm 2.0 mm 4.0 mm Where used: 4 screws th at secure the ke yboard to the computer (see Keyboard on pag e 47 ) 98 Chapter 8 Screw listing ENWW[...]

Black Phillips PM2.0×7.0 screw Color Quantity Length Thread Head width Black 9 7.0 mm 2.0 mm 5.0 mm Where used: 4 screws that secure the swit ch cover to the computer (see Switch cover on page 50 ) Where used: 5 screws that secure the to p cover to the computer (see Top cover on page 59 ) ENWW Black Phillips PM2.0×7.0 screw 99[...]

Phillips PM2.5×6.0 screw Color Quantity Length Thread Head width Silver 4 6.0 mm 2.5 mm 5.0 mm Where used: 2 screws th at secure the displa y assembly to the computer (see Display assembly on page 52 ) Where used: 2 screws th at secure the displa y assembly to the computer (see Display assembly on page 52 ) 100 Chapter 8 Screw list ing ENWW[...]

Phillips PM2.0×5.0 screw Color Quantity Length Thread Head width Silver 6 5.0 mm 2.0 mm 5.0 mm Where used: 2 screws that secure the to p cover to the computer (see Top cover on page 59 ) Where used: 4 screws that secure the fan/heat si nk assembly to the system board (see Fan/heat sink assembly on page 71 ) ENWW Phillips PM2.0×5.0 screw 101[...]

Silver Phillips PM2.0×7.0 screw Color Quantity Length Thread Head width Silver 8 7.0 mm 2.0 mm 5.0 mm Where used: 8 screws that secure the display bezel to the displa y assembly (see Display assembly on page 52 ) ENWW Silver Phil lips PM2. 0×7.0 screw 1 03[...]

Phillips PM2.0×3.0 screw Color Quantity Length Thread Head width Silver 1 3.0 mm 2.0 mm 4.0 mm Where used: One screw that secures the Bluetoot h mod ule to the system board (see Bluetooth module on page 65 ) 104 Chapter 8 Screw list ing ENWW[...]

9 Backup and Recovery Recovering system information Tools provided by the operating system and Recovery Manager software are designed to help you with the following tasks for safeguarding your informatio n and restoring it in case of a system failure: ● Back up your information regularly to protect your important system files. ● Make a set of r[...]

To copy the screen and paste it into a word -processi ng document: a . Display the screen. b . Copy the screen: To copy only the active window, p ress alt+fn+prt sc . To copy the entire scree n, press fn+prt sc . c . Open a word -proce ssing do cument, and then select Edit > Pa ste . Using system re store points When you back up your system, you[...]

4 . Click the System Re store button, and then click Next . The System Restore window opens. 5 . Follow the on-screen instructions. Creating recovery discs Recovery Manager creates a set of recovery CDs or DV Ds for the computer. Use re covery d iscs to restore the operating system and software programs to factory settings, in case of system failur[...]

Recovery Manager replaces corrupted sy stem files and re installs d e leted system files within the program . ● In most cases, if the program you are reinstalling is still on your computer, the reinstallation pr ocess does not affect your personal settings. ● In all cases, if a program has been deleted fro m your comput er, the reinstallation p[...]

Recovering from the recovery discs To restore the syste m from the recovery discs: 1 . Back up all personal files. 2 . Insert the first recovery disc into th e optical drive and restart the computer. 3 . Follow the on-screen instructions. Recovering from the partition on the hard drive You can perform a recovery from the partition on the hard drive[...]

Updating reinstalled s oftware After you perform a system recovery, connect to the Internet to update all reinstalled software. To access update links for the operating system and other software provided on your computer: ▲ Select Start > Help and Support . To update optional software, follow the instructions provided by the software manufactu[...]

10 Connector pin assignments Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3G r o u n d Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3G r o u n d ENWW Audio-out (headphone) 111[...]

External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock 112 Chapter 10 Connector pin assignments ENWW[...]

RJ-11 (modem) Pin Signal 1 Unused 2 Tip 3 Ring 4 Unused 5 Unused 6U n u s e d RJ-45 (network) Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8U n u s e d ENWW RJ-11 (modem) 113[...]

S-Video-out Pin Signal 1 S-VHS color (C) signal 2 Composite video signal 3 S-VHS intensity (Y) signal 4 S-VHS color ground 5 TV-CD 6 S-VHS intensity ground 7 Composite video ground Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4G r o u n d 114 Chapter 10 Connector pin assignments ENWW[...]

11 Power cord set requirements The wide range input feature of the computer permits it to operate from any line voltage fr om 100 to 120 volts AC or fr om 220 to 240 volts AC. The 3-conductor power cord set includ ed with the computer meets the requireme nts for use in the country or region where the equipme nt is purchased. Power cord sets for use[...]

Requirements for specific countries or regions Region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 Korea EK 4 The Netherlands KEMA 1 Norway NEMKO 1 The People's Republic of China CCC 5 Sweden SEMKO 1 Switz[...]

12 Recycling Battery When a battery has reached the end of its useful life , do not dispos e of the battery in genera l household waste. Follow the local laws and regulations in yo ur area for computer ba ttery disposal. ENWW Battery 117[...]

Display WARNING! The ba cklight contain s merc ury. Caution should be exercised when r emoving and handling the backlight to avoid damaging this component and causing ex posure to the mercury. CAUTION: The pro cedures in this appendix can result in damage to display components. The only components intended for recy cling purposes are the liquid cr [...]

Perform the foll owing steps to disasse mble the display assembly: 1 . Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2 . Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel diseng ages from the display assembly. 3 . Re[...]

4 . Disconnect all display panel cables (1) from the display inverter and remove the inverter (2) . 5 . Remove all screws (1) that sec ure the disp lay panel assembly to the disp lay enclosure . 6 . Remove the display panel assembly (2) from the display enclosure. 7 . Turn the display panel assembly upside down. 8 . Remove all screws that secure th[...]

10 . Remove the display panel frame (2) from the display panel. 11 . Remove the screws (1) that secure the backlight cover to the display panel. 12 . Lift the top edge of the backlight cover (2) and swing it outward. 13 . Remove the backlight cover. 14 . Turn the display panel right-side up. ENWW Display 121[...]

15 . Remove the backlight cables (1) from the clip (2) in the display panel. 16 . Turn the display pa nel upside down. 17 . Remove the backlight fram e from the display panel. WARNING! The backlight contains mercury. Ex ercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 122 [...]

18 . Remove the backlight from the backlight frame. 19 . Disconnect the display cable (1) from the LCD panel. 20 . Remove the screws (2) that secure the LCD panel to the display rear panel. 21 . Release the LCD panel (3) from the display rear panel. 22 . Release the tape (4) that secures the LCD panel to the display rear panel. 23 . Remove the LCD [...]

Index A AC adapter, spare part number 24 , 25 administrator password 79 advanced Setup Utility features 78 applications key, Windows 5 audio, product description 2 audio-in jack location 8 pin assignments 111 audio-out jack location 8 pin assignments 111 audio-out S/PDIF jack 8 audio/infrared board removal 69 spare part number 18, 28, 69 B back up [...]

display assembly removal 52 spare part numbers 16, 26, 52 display bezel illustrated 20 removal 55 spare part numbers 20, 27, 56 display components identifying 6 recycling 118 display connector co ver illustrated 22 removal 53 display convertible hinge 7 display enclosure illustrated 20 spare part numbers 21, 28 display inverter illustrated 20 remov[...]

removal 47 spare part numbers 17, 27, 28, 47 keyboard components 5 keypad keys 5 keys esc 5 fn 5 function 5 Windows applications 5 Windows logo 5 L language support 77, 80 left-side components 10 lights battery 7 Digital Media Slot 10 drive 7 power 7, 8 wireless 9 M Main menu 79 mass storage devices, spare part numbers 23 Media button 6 memory map [...]

serviceabili ty 3 wireless 2 product name 1 R rear components 11 recovery discs 107 recovery partition, deleting 109 recovery, system 108 remote control, spare part numbers 24, 25, 26 removal/replacement preliminaries 30 procedures 35 restore points 106 right-side components 9 RJ-11 jack location 11 pin assignments 113 RJ-45 jack location 9 pin ass[...]