HP 4100 Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung HP 4100 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von HP 4100, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung HP 4100 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung HP 4100. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung HP 4100 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts HP 4100
- Den Namen des Produzenten und das Produktionsjahr des Geräts HP 4100
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts HP 4100
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von HP 4100 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von HP 4100 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service HP finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von HP 4100 zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts HP 4100, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von HP 4100 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    h p L a s e rJet 4100 user guide[...]

  • Seite 2

    [...]

  • Seite 3

    HP LaserJet 4100, 4100N, 4100TN, and 4100DTN Pr inters User Guide[...]

  • Seite 4

    He wlett-P ac kard Company 11311 Chinden Boule vard Boise, Idaho 83714 USA © Cop y right Hewlett-P ac kard Compa n y 2002 All Rights Reser v ed. Except as allow ed b y cop yr ight laws or herein, reproduction, adaptation, or translation without prior wr itten per mission is prohibited. A user of the Hewlett-P ac kard printer associated with this u[...]

  • Seite 5

    EN Contents 3 Contents About this guide 9 How to use this online user guide . . . . . . . . . . . . . . . . . . . . . . . . .9 Navigational features in this guide . . . . . . . . . . . . . . . . . . . . . .9 Features of Acrobat Reader . . . . . . . . . . . . . . . . . . . . . . . . . .10 Where to look for more information . . . . . . . . . . . . . [...]

  • Seite 6

    4 Contents EN 2 Printing tasks Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Selecting the output bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Printing to the top output bin . . . . . . . . . . . . . . . . . . . . . . . . . .44 Printing to the rear output bin . . . . . [...]

  • Seite 7

    EN Contents 5 Cleaning the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 General guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Cleaning procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 Cleaning the fuser . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 8

    6 Contents EN Communicating with an optional HP JetDirect print server . . . . .150 Checking the printer configuration . . . . . . . . . . . . . . . . . . . . . . . .151 Menu map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Configuration page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 Supp[...]

  • Seite 9

    EN Contents 7 Appendix B Control panel menus Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 Control panel menu map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 Quick Copy Jobs Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 Private/Stored Jobs Menu . . . [...]

  • Seite 10

    8 Contents EN Appendix F Embedded web server Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251 Accessing the embedded web server . . . . . . . . . . . . . . . . . . . . .252 Embedded web server pages . . . . . . . . . . . . . . . . . . . . . . . . . . .252 Home pages . . . . . . . . . . . . . . . . . [...]

  • Seite 11

    EN How to use this online user guide 9 About this guide Ho w to use this online user guide This user guide is provided in an Adobe™ Acrobat por tab le document f or mat (PDF file). This section will help f amiliarize y ou with using PDF documents. Na vigational f eatures in this guide Clic k the T ab le of Contents icon to go to the tab le of con[...]

  • Seite 12

    10 About this guide EN Features of Acr obat Reader Finding inf ormation in PDF documents T o find specific inf or mation in a PDF document, click Contents or Index in the upper-left cor ner of the Acrobat Reader windo w , and then clic k the topic y ou want. Vie wing PDF documents F or complete instr uctions on how to vie w PDF documents, see the o[...]

  • Seite 13

    EN How to use this online user guide 11 P aging thr ough a document The f ollowing options are a vailab le fo r paging through a document. Br owsing with thumbnails A thumbnail is a miniature vie w of each document page. Y ou can displa y thumbnails in the ov er view area. Use a thumbnail to jump quic kly to a page and to adjust the vie w of the cu[...]

  • Seite 14

    12 About this guide EN T o print the whole document: F rom the File menu, choose Print . Choose All n pages ( n represents the total number of pages in the document), then clic k OK . Note Go to http://www .adobe.com/ f or the latest v ersions and additional languages of Adobe ™ Acrobat Reader .[...]

  • Seite 15

    EN Where to look for more information 13 Where to look f or more inf ormation Se ver al ref erences are av ailable f or use with this printer . Additional inf or mation is av ailable at http://www .hp .com/suppor t/lj4100 . Setting up the printer Getting Star ted Guide Inf or mation f or setting up y our printer (Getting Star ted), as well as tips [...]

  • Seite 16

    14 About this guide EN Using the printer Getting Star ted Guide Inf or mation f or setting up y our printer (Getting Star ted), as well as tips and quic k inf or mation f or using the printer (Quic k Ref erence). F or additional copies, contact HP DIRECT at (800) 538-8787 (U .S.) or contact y our HP- author iz ed dealer . Online Help Inf or mation [...]

  • Seite 17

    EN Overview 15 1 Pr inter basics Overview Congr atulations on y our purchase of an HP LaserJet 4100 series printer . If you ha ve not done so , see the getting star ted guide provided with the printer f or setup instr uctions. Now that the printer is set up and ready to use, tak e a f ew moments to get to know the printer . This chapter introduces [...]

  • Seite 18

    16 Chapter 1 - Printer basics EN Printer features and benefits Speed and thr oughput ● instant-on fuser prints the first page in 12 seconds ● prints letter-size paper at 25 pages per minute (ppm) or A4-siz e paper at 24 ppm ● “ RIP ONCE ” capability with 32 MB or hard disk options Resolution ● F astRes 1200 — produces 1200-dpi print q[...]

  • Seite 19

    EN Printer features and benefits 17 Expandable design ● optional paper handling accessories: • stac kab le 500-sheet paper tra ys (up to two additional tr a ys) • pow e r en velope f eeder (holds up to 75 env elopes) • duple x pr inting accessor y (f or two-sided printing) ● flash storage (f or f or ms, f onts, and signatures) ● e x pan[...]

  • Seite 20

    18 Chapter 1 - Printer basics EN Printer configurations This printer is av ailable in f our configurations: HP LaserJet 4100 ● 16 MB RAM ● 100-sheet paper tra y ● 500-sheet paper tra y HP LaserJet 4100N ● 32 MB RAM ● HP JetDirect 10/100Base-TX print ser ver card f or network connection ● 100-sheet paper tra y ● 500-sheet paper tra y H[...]

  • Seite 21

    EN Printer parts and locations 19 Printer par ts and locations T op cov er (toner car tr idge under neath) Control panel Po w e r s w i t c h T ra y 1 (100-sheet) T op output bin Additional memor y can be installed here Printer par ts (fr ont view , HP LaserJet 4100/4100N printer) T ra y numbers P aper le vel indicator T ra y 2 (500-sheet) 2 1[...]

  • Seite 22

    20 Chapter 1 - Printer basics EN 1 Fuser (can be remov ed to clear paper jams) 2 Rear output bin (straight-through paper path) 3 P o wer connector 4 Dust cov er (tra y 2 dust cov er not installed if duple x er is installed) 5 P arallel interf ace por t 6 Enhanced I/O (EIO) slots 7 F ast Infr aRed (FIR) por t for an optional FIR receiv er 8 Memor y [...]

  • Seite 23

    EN Accessories and supplies 21 Accessories and supplies Y ou can increase the capabilities of the printer with optional accessories and supplies, as shown belo w . See “ Ordering inf or mation ” on page 22. Note Use accessories and supplies specifically designed for the printer to ensure optimum perf or mance. The printer suppor ts two enhanced[...]

  • Seite 24

    22 Chapter 1 - Printer basics EN Or dering inf o rmation Items and par t number s Use only par ts and accessor ies specifically designed f or this pr inter . See the tab le ahead, which is organized according to type of accessor y: ● paper handling ● memor y , f onts, and mass storage ● hardware ● cab les and interf aces ● documentation ?[...]

  • Seite 25

    EN Ordering information 23 4 On the left side of the De vice Configuration page, doub le-click Or der Supplies . This pro vides a URL from which to purchase consumab les. Supplies inf ormation with par t numbers and printer inf or mation is provided. 5 Select the par t numbers y ou wish to order and f ollow the instructions on the screen. Or dering[...]

  • Seite 26

    24 Chapter 1 - Printer basics EN P aper handling Item P ar t number Description or use 500-sheet f eeder and paper tra y C8055A Stackab le paper f eeder and 500-sheet paper tra y . En v elope f eeder C8053A A utomatically f eeds up to 75 env elopes. Duple x pr inting accessor y (duple xer) C8054A Allows automatic printing on both sides of paper . R[...]

  • Seite 27

    EN Ordering information 25 Har d ware Item P ar t number Description or use FIR receiv er C4103A F ast InfraRed Receiv er . Cables and interfaces Item P ar t number Description or use P arallel cab les 2-meter IEEE-1284 cab le 3-meter IEEE-1284 cab le C2950A C2951A Macintosh computer serial cable 92215S F or connecting to a Macintosh computer . Mac[...]

  • Seite 28

    26 Chapter 1 - Printer basics EN Documentation Item P ar t number Description or use HP LaserJet Printer F amily P aper Specification Guide 5963-7863 A guide to using paper and other print media with HP LaserJet printers (English only). HP LaserJet 4100 Software and User Documentation CD-ROM Americas/Western Europe Europe Asia P acific C8049-60104 [...]

  • Seite 29

    EN Ordering information 27 Printing supplies Item Part number Description or use To n e r c a r t r i d g e s 6,000 pages 10,000 pages C8061A C8061X Replacement HP UltraPrecise toner car tr idge . HP LaserJet P aper Letter (8.5 b y 11 in), 500 sheets/ ream, 10-ream car ton Letter (8.5 b y 11 in), 200 sheets/ ream, 12-ream car ton Letter (8.5 b y 11[...]

  • Seite 30

    28 Chapter 1 - Printer basics EN HP Office P aper Letter (8.5 b y 11 in), 500 sheets/ ream, 10-ream car ton Letter (8.5 b y 11 in), 3-hole, 500 sheets/ream, 10-ream car ton Legal (8.5 by 14 in), 500 sheets/ ream, 10-ream car ton Letter (8.5 b y 11 in), Quick P ack, 2,500-sheet car ton A4 (216 by 279 mm), 500 sheets/ ream, 5-ream car ton HPC8511 HPC[...]

  • Seite 31

    EN Control panel layout 29 Contr ol panel la y out Contr ol panel The printer ’ s control panel consists of the f ollowing: Contr ol panel lights Ready Data Attention Menu Item –V alue+ Select Go Cancel Job T wo-line displa y READY Printer online help Light Indication when lit Ready The printer is ready to pr int. Data The printer is processing[...]

  • Seite 32

    30 Chapter 1 - Printer basics EN Contr ol panel keys Ke y Function G O • Places the printer either online or offline. • Prints any data residing in the printer ’ s buff er . • Allows the printer to resume printing after being offline. Clears most printer messages and places the pr inter online. • Allows the printer to continue printing wi[...]

  • Seite 33

    EN Control panel layout 31 Using the printer online help system This printer features an online help system on the control panel that provides instructions f or resolving most pr inter errors . Cer tain control panel error messages alter nate with instructions on accessing the online help system. Whene ver a ? appears in an error message or a messa[...]

  • Seite 34

    32 Chapter 1 - Printer basics EN Contr ol panel menus F or a complete list of control panel items and possible v alues, see "Control panel menus" on page 205. Press M ENU f or access to all control panel menus . When additional tra ys or other accessories are installed in the pr inter , ne w menus or menu items might automatically appear [...]

  • Seite 35

    EN Printer software 33 Printer software Software pr ovided The printer comes with pr inting software and other helpful softw are on a CD . If y our computer does not hav e a CD drive b ut you ha ve access to one, y ou can cop y the software onto disk ettes f or installation into y our computer . See the getting star ted guide f or installation inst[...]

  • Seite 36

    34 Chapter 1 - Printer basics EN Depending on the configuration of Windo ws-based computers , the installation progr am f or the pr inter software automatically chec ks the computer f or Inter net access and can obtain the latest software . If you do not ha v e access to the Inter net, see "HP Customer Care Ser vice and Suppor t" on page [...]

  • Seite 37

    EN Printer software 35 Printer driver s Printer dr iv ers access the pr inter f eatures and allow the computer to communicate with the printer (via a pr inter language). Note Chec k the ReadMe .wri file provided on the CD f or additional software included and suppor ted languages. Cer tain pr inter f eatures are a vailab le only from the PCL 6 dr i[...]

  • Seite 38

    36 Chapter 1 - Printer basics EN Software f or Windows-based computer s Netw ork administrators : If the printer is attached to a network through an HP JetDirect EIO card, the printer must be configured f or that network bef ore y ou can print. For Microsoft and No vell NetW are networks, y ou can use the pr inter installation software . For other [...]

  • Seite 39

    EN Printer software 37 Choose the right printer driver f o r y our needs Choose a printer dr iv er based on the w a y you use the printer . ● Use the PCL 6 driver to tak e full advantage of the printer ’ s f eatures. Unless bac kw ard compatibility with pre vious PCL drivers or older printers is necessar y , the PCL 6 dr iv er is recommended. ?[...]

  • Seite 40

    38 Chapter 1 - Printer basics EN HP JetSend comm unications technology HP JetSend is a technolog y from Hewlett- P ackard that allo ws de vices to communicate with each other simply and directly . HP JetSend is b uilt into your printer , allo wing it to receiv e information from any HP JetSend- enab led sending de vice anywhere on y our network, wh[...]

  • Seite 41

    EN Printer software 39 How the JetSend comm unications technology w orks Networked de vices T o use the HP JetSend capability betw een networked de vices, print a configuration page to find y our HP JetSend IP address, and giv e y our address to any one who wants to send inf or mation to your printer via HP JetSend. (See “ Configuration page ” [...]

  • Seite 42

    40 Chapter 1 - Printer basics EN Software f or Macintosh computers P ostScript Printer Description files (PPDs) PPDs, in combination with the Apple LaserWriter 8 Driver , access the printer features and allo w the computer to communicate with the printer . An installation program f or the PPDs and other softw are is provided on the CD . Use the App[...]

  • Seite 43

    EN Printer software 41 Software f or networks F or a summar y of av ailable HP network installation and configuration software solutions , see the HP JetDirect Pr int Ser v er Administrator ’ s Guide . Y ou can find this guide on the CD included with the printer . HP W eb JetAdmin HP W eb JetAdmin is a browser-based management tool and should be [...]

  • Seite 44

    42 Chapter 1 - Printer basics EN[...]

  • Seite 45

    EN Overview 43 2 Pr inting tasks Overview This chapter presents basic printing tasks , such as: ● selecting the output bin ● loading the tra ys ● printing on both sides of paper with the optional duplex er ● printing on special paper , such as letterhead and transparencies ● using the optional pow er env elope feeder This chapter also int[...]

  • Seite 46

    44 Chapter 2 - Printing tasks EN Selecting the output bin The printer has two output locations: the rear output bin and the top output bin. T o use the top output bin, be sure the rear output bin is closed. T o use the rear output bin, open it. ● If paper coming out of the top output bin has prob lems, such as e xcessive curl, tr y pr inting to t[...]

  • Seite 47

    EN Selecting the output bin 45 Printing to the rear output bin The printer alwa ys pr ints to the rear output bin if it is open. P aper printed to this bin will be face-up , with the last page on top . T o open the rear output bin, gr asp the handle at the top of the bin. Pull the bin down, and slide out the e xtension. Printing from tra y 1 to the[...]

  • Seite 48

    46 Chapter 2 - Printing tasks EN Loading tra y 1 T ra y 1 is a multi-pur pose tr a y that holds up to 100 sheets of paper , 10 en v elopes, or 20 inde x cards . The printer ’ s def ault is to pull paper from tra y 1 first. T o change this, see “ Customizing tr a y 1 operation ” on page 69. T ra y 1 provides a con v enient w a y to print en v [...]

  • Seite 49

    EN Loading trays 2, 3, and 4 47 Loading tra ys 2, 3, and 4 T ra ys 2, 3, and 4 are 500-sheet paper tra ys. T ra y 3 is optional and comes with the 4100TN and 4100DTN models. T ra y 4 is an additional 500-sheet option. The tra ys adjust f or six standard sizes of media, as well as f or many custom siz es (f or details, see “ Suppor ted sizes and w[...]

  • Seite 50

    48 Chapter 2 - Printing tasks EN 3 Load paper into the tra y . 4 Mak e sure the paper is flat in the tra y at all f our cor ners and below the front and bac k tabs. 5 Slide the tra y bac k into the printer . Note If the tra y is not properly adjusted, the printer might display an error message or paper might jam. F or paper or ientation when y ou a[...]

  • Seite 51

    EN Printing both sides of paper (optional duplexer) 49 Printing both sides of paper (optional duple xer) The printer can automatically pr int on both sides of paper with an optional duple x pr inting accessor y (duple x er). This is called duple xing. The duple xer suppor ts the f ollowing paper siz es: Letter , Legal, Ex ecutive , A4, and B5 (JIS)[...]

  • Seite 52

    50 Chapter 2 - Printing tasks EN Guidelines f or printing both sides of paper Note the f ollowing guidelines: ● Do not print on both sides of labels, transparencies , env elopes, v ellum, or paper heavier than 28 lb (105 g/m 2 ). P aper jamming might occur with these types of media, and damage to the printer might occur with labels. ● Y ou migh[...]

  • Seite 53

    EN Printing both sides of paper (optional duplexer) 51 Placement f or paper requiring a specific orientation Se ver al kinds of paper require a specific orientation when you duple x — f or e xample, letterhead, preprinted paper , and paper with watermar ks and prepunched holes. The duple xer prints the second side of paper first. Orient paper in [...]

  • Seite 54

    52 Chapter 2 - Printing tasks EN La y out options f or printing both sides of paper The f our duplex orientation options are shown below . These options can be selected from the printer dr iv er or from the printer control panel (set BINDING from the P aper Handling Menu and ORIENTATION from the Printing Menu). Note When using Windows driv ers , se[...]

  • Seite 55

    EN Printing special paper 53 Printing special paper This section discusses printing on types of paper that require special handling: ● “ Printing small or narrow paper ” on page 53 ● “ Printing letterhead, prepunched, or prepr inted paper (single- sided) ” on page 53 ● “ Printing env elopes ” on page 55 ● “ Printing labels ”[...]

  • Seite 56

    54 Chapter 2 - Printing tasks EN F or tra y 1, load paper with the side-to-be-pr inted f acing up , and the top , shor t edge toward the printer . F or all other tra ys , load paper with the side-to-be-pr inted f acing do wn, and the top edge tow ard you. P aper orientation for tra y 1 Paper orientation for trays 2, 3, and 4[...]

  • Seite 57

    EN Printing special paper 55 Printing en velopes With the optional en v elope f eeder , the printer will automatically feed up to 75 en v e lopes. T o order an env elope f eeder , see “ Order ing inf or mation ” on page 22. T o pr int with the en v elope feeder , see “ F eeding env elopes automatically (optional env elope f eeder) ” on page[...]

  • Seite 58

    56 Chapter 2 - Printing tasks EN Loading en velopes in tra y 1 1 Open tra y 1, but do not pull out the e xtension. (Most env elopes f eed best without the e xtension. Howe v er , ov ersize en velopes might need the e xtension.) 2 Load up to 10 en v elopes in the center of tra y 1 with the side-to-be- printed facing up , and the postage- end tow ard[...]

  • Seite 59

    EN Printing special paper 57 Feeding en velopes automaticall y (optional en velope feeder) With the optional en v elope f eeder , the printer will automatically feed up to 75 en v e lopes. T o pr int env elopes without an env elope feeder , see “ Printing env elopes ” on page 55. The en v e lope f eeder suppor ts only standard-size en v elopes [...]

  • Seite 60

    58 Chapter 2 - Printing tasks EN Inser ting and remo ving the en velope f eeder 1 Open tra y 1. 2 Remov e the plastic cov er from the printer . (Replace the cov er when the en v elope f eeder is not attached.) 3 Inser t the env elope f eeder into the printer until it locks into place . (The connector on the top right side of the en v elope f eeder [...]

  • Seite 61

    EN Printing special paper 59 Loading en velopes in the en velope f eeder Note Print only on env elopes approv ed for use in the printer (see “ Pr inting en v elopes ” on page 55 and “ En v elopes ” on page 197). 1 F old down the tr ay e xtension. Lift the en v elope weight. 2 Squeeze the release le v er on the left en v elope guide and slid[...]

  • Seite 62

    60 Chapter 2 - Printing tasks EN 4 Adjust the guides to touch the en v elopes without bending them. Mak e sure the en v elope feeder is not ov erfilled. 5 Low e r the en velope w eight onto the en v elopes . Note Select the en v elope size from the software application (if the setting is a v ailab le), the printer dr iv er , and the P aper Handling[...]

  • Seite 63

    EN Printing special paper 61 Printing labels Use only labels recommended f or use in laser pr inters. Mak e sure that labels meet the correct specifications (see “ Labels ” on page 196). Do: ● Print a stack of up to 50 labels from tra y 1 or a stac k of 50 to 100 labels from other tra ys. ● Load labels in tra y 1 with the side-to-be-printed[...]

  • Seite 64

    62 Chapter 2 - Printing tasks EN Printing transparencies Use only transparencies recommended f or use in laser printers. F or transparency specifications , see “ T ransparencies ” on page 196 ● Load transparencies f ace up in tra y 1 with the top tow ard the printer . Up to 50 transparencies can be loaded in tra y 1. ● A stac k of 50 to 100[...]

  • Seite 65

    EN Printing special paper 63 Printing car ds, custom-siz e, and heavy paper Custom-size paper can be printed from any tr a y . F or paper specifications, see “ P aper specifications ” on page 188. The maximum paper w eight is 199 g/m 2 (53 lb) from tra y 1 and 105 g/m 2 (28 lb) from tra ys 2, 3, and 4. Note T o pre vent curl and other problems [...]

  • Seite 66

    64 Chapter 2 - Printing tasks EN Note Settings in the printer dr iv er and softw are application ov err ide control panel settings. (Softw are application settings generally ov err ide printer driver settings .) If the settings are not a v ailable from the softw are, set the custom paper size from the control panel: 1 F rom the Printing Menu set CO[...]

  • Seite 67

    EN Advanced printing tasks 65 Ad vanced printing tasks This section will help y ou tak e full adv antage of the pr inter ’ s fe atures. Using features in the printer driver When y ou print from a software application, many of the printer ’ s f eatures are av ailable from the printer driver . T o access Windows printer dr iv ers, see “ Access [...]

  • Seite 68

    66 Chapter 2 - Printing tasks EN Sa ving printer setup inf o rmation (Quic k Sets) Printer dr iv ers allow y ou to sav e the printer settings you use most often as the def ault settings. F or ex ample, the driv er might be set to print on letter size paper , por trait orientation, with automatic tra y selection (from the first a v ailab le tra y). [...]

  • Seite 69

    EN Advanced printing tasks 67 Different fir st page F ollow these instructions for printing a first page that is diff erent from other pages in the print job . 1 F or Windows , select “ Use diff erent paper f or first page ” in yo ur printer dr iv er . Choose one tra y (or Man ual F eed) f or the first page and one of the other tra ys f or the [...]

  • Seite 70

    68 Chapter 2 - Printing tasks EN Customizing what tra y is used for printing Understanding tra y or der When the printer receives a print job , it selects the paper tra y b y tr ying to match the requested paper type and size with what has been loaded in the tra ys. Using an “ autoselect ” process, it searches all a v ailable input paper tra ys[...]

  • Seite 71

    EN Advanced printing tasks 69 Customizing tra y 1 operation The printer can be set to pr int from tra y 1 as long as it is loaded, or to print only from tra y 1 if the type of paper loaded is specifically requested. Set TRAY 1 MODE=FIRST or TRAY 1 MODE=CASSETTE in the P aper Handling Menu at the printer control panel (see “ Pa p e r Handling Menu[...]

  • Seite 72

    70 Chapter 2 - Printing tasks EN Printing b y type and size of paper (locking tra ys) Y ou can configure the printer to select paper by type (such as plain or letterhead) and siz e (such as letter or A4), as opposed to source (a paper tra y). See “ Suppor ted sizes and w eights of paper ” on page 189 and “ Suppor ted types of paper ” on on [...]

  • Seite 73

    EN Advanced printing tasks 71 • Optional en velope feeder : Set the paper siz e from the P aper Handling Menu. 4 F rom the softwa re or printer driver , select the desired type and size of paper . Note The type and size settings can also be configured from HP W eb JetAdmin software f or networked printers. See the printer dr iv er online help . T[...]

  • Seite 74

    72 Chapter 2 - Printing tasks EN Job retention features T o use the job retention f eatures listed below , you m ust install a hard disk accessor y in the printer and proper ly configure the drivers . T o suppor t job retention f eatures f or comple x jobs , HP recommends that y ou install additional memor y (see “ Order ing inf or mation ” on [...]

  • Seite 75

    EN Job retention features 73 Deleting a quic k cop y job When a user sends a quic k cop y job , the pr inter ov erwr ites an y pre vious jobs with the same user and job name . If there is not a quic k cop y job already stored under the same user and job name and the printer needs additional space, the printer may delete other quic k cop y jobs star[...]

  • Seite 76

    74 Chapter 2 - Printing tasks EN Pr oofing and holding a job The proof and hold f eature provides a quic k and easy wa y to print and proof one cop y of a job and then pr int the additional copies . T o per manently store the job and pre v ent the printer from deleting it when space is needed f or something else, select the Stored Job option in the[...]

  • Seite 77

    EN Job retention features 75 Deleting a held job When a user sends a proof and hold job , the pr inter automatically deletes that user ’ s pre vious proof and hold job . If there is not a proof and hold job already f or that job name and the pr inter needs additional space, the printer ma y delete other proof and hold jobs star ting with the olde[...]

  • Seite 78

    76 Chapter 2 - Printing tasks EN Printing a priv ate job The private printing f eature lets a user specify that a job is not printed until that user releases it using a 4-digit personal identification number (PIN) through the printer control panel. The user specifies the PIN in the driver and it is sent to the printer as par t of the pr int job . S[...]

  • Seite 79

    EN Job retention features 77 Deleting a priv ate job A private job is automatically deleted from the printer ’ s hard disk accessor y after the user releases it f or pr inting, unless the user selects the Stored Job option in the driver . Note If y ou tur n the printer off, all quic k cop y , proof and hold, and pr iv ate jobs are deleted. A priv[...]

  • Seite 80

    78 Chapter 2 - Printing tasks EN Storing a print job The user can download a print job to the printer ’ s hard disk accessor y without printing it. The user can then pr int the job at any time through the printer control panel. For e xample , a user ma y want to download a personnel f or m, calendar , time sheet, or accounting f or m that other u[...]

  • Seite 81

    EN Storing a print job 79 Deleting a stored job Jobs stored on the printer ’ s hard disk accessor y can be deleted from the control panel. 1 Press M ENU repeatedly until PRIVATE/STORED JOBS MENU appears. 2 Press I TEM until the desired user name appears. 3 F or Macintosh computers only: The user name appears on the first line of the displa y and [...]

  • Seite 82

    80 Chapter 2 - Printing tasks EN Printing with the optional HP F ast InfraRed Receiver The optional HP F ast InfraRed Receiv er enab les wireless printing from any IRD A-compliant por tab le device (such as a laptop computer) to the HP LaserJet Series pr inters. The printing connection is maintained by positioning the sending infrared (FIR) por t w[...]

  • Seite 83

    EN Printing with the optional HP Fast InfraRed Receiver 81 3 Change P ostScript Printer Description (PPD) File to match the printer . 4 On the File menu, select Sa ve . 5 Enter a name and location f or the desktop pr inter icon and clic k OK . Note Once the icon is on the desktop (or sa v ed elsewhere), printer options need to be manually configure[...]

  • Seite 84

    82 Chapter 2 - Printing tasks EN Interrupting and resuming printing The job interrupt and resume feature lets y ou temporarily stop the job that is currently printing in order to pr int another job through an FIR connection. When the FIR job is finished printing, the interr upted job resumes printing. T o interrupt the job at the pr inter , connect[...]

  • Seite 85

    EN Overview 83 3 Pr inter maintenance Overview This chapter e xplains basic pr inter maintenance: ● managing the toner car tr idge ● cleaning the printer ● cleaning the fuser (manual and automatic) ● perf or ming pre v entative maintenance ● configuring aler ts[...]

  • Seite 86

    84 Chapter 3 - Printer maintenance EN Managing the toner cartridg e HP toner car tridges When y ou use a genuine ne w HP toner car tridge (par t number C8061A or C8061X), y ou can obtain the f ollowing types of supplies inf or mation: ● amount of toner remaining ● estimated number of pages remaining ● number of pages printed ● other supplie[...]

  • Seite 87

    EN Managing the toner cartridge 85 T oner car tridg e stora ge Do not remov e the toner car tr idge from its pac k age until you are ready to use it. The shelf lif e of a car tr idge in an unopened pac kage is appro ximately 2.5 years . CA UTION T o prev ent damage to the toner car tr idge , do not e xpose it to light f or more than a f ew min utes[...]

  • Seite 88

    86 Chapter 3 - Printer maintenance EN Using printer software Three things are required to use this f eature: ● the “ Supplies Inf or mation and Order ing ” software m ust be installed on y our computer (use the custom installation option to install this software) ● the printer must be directly connected to your computer (par allel) ● y ou[...]

  • Seite 89

    EN Managing the toner cartridge 87 T oner low and toner out conditions When toner is lo w When toner is low , the printer control panel displays a TONER LOW message and the printer continues to pr int. The message first appears when about 15% of the toner remains in the car tr idge (about 1,500 pages remaining f or the 10,000-page car tr idge and a[...]

  • Seite 90

    88 Chapter 3 - Printer maintenance EN Cleaning the printer General guidelines F ollow the cleaning procedure on the f ollowing page e v ery time you change the toner car tr idge or whene v er print quality problems occur . As much as possib le, k eep the printer free from dust and debr is. ● Clean the outside of the printer with a slightly water-[...]

  • Seite 91

    EN Cleaning the printer 89 Cleaning pr ocedure 1 T ur n the printer off and unplug the pow e r cord. 2 Open the top cov er and remov e the toner car tr idge . W ARNING! A v oid reaching too f ar into the pr inter . The adjacent fusing area might be hot! CA UTION T o pre vent damage to the toner car tr idge , do not e xpose it to light for more than[...]

  • Seite 92

    90 Chapter 3 - Printer maintenance EN 5 Reinstall the toner car tr idge , close the top cov er , plug the po wer cord in, and tur n the printer on. 5[...]

  • Seite 93

    EN Cleaning the fuser 91 Cleaning the fuser Run the printer cleaning page to keep the fuser free of toner and paper par ticles that can sometimes accumulate. Accum ulation of toner and par ticles can cause specks to appear on the front or bac k side of y our print jobs (see “ Specks ” on page 130). T o ensure optimum print quality , HP recommen[...]

  • Seite 94

    92 Chapter 3 - Printer maintenance EN Running the c leaning page automatically Using the procedure below , y ou can set the printer to pr int cleaning pages automatically at an inter v al that y ou choose . In order f or the cleaning page to r un without inter v ention, you must k eep the selected size and Plain paper type a v ailab le in the print[...]

  • Seite 95

    EN Performing preventative maintenance 93 P erf orming pre ventative maintenance Y ou should replace cer tain par ts when the PERFORM PRINTER MAINTENANCE message appears on the printer control panel. This will help ensure that y our printer maintains optimum perf or mance. The maintenance message will appear e very 200,000 pages. T o chec k the num[...]

  • Seite 96

    94 Chapter 3 - Printer maintenance EN Configuring aler ts Y ou can use HP W eb JetAdmin or the printer ’ s embedded web ser v er to configure the system to aler t you of prob lems with the pr inter . The aler ts take the f or m of e-mail messages to the e-mail account or accounts that y ou specify . Y ou can configure the f ollowing: ● the de v[...]

  • Seite 97

    EN Overview 95 4 Prob lem solving Overview This chapter will help y ou to troub leshoot and solv e printer problems . Clear paper jams Occasionally , paper can jam dur ing printing. This section will help y ou to locate paper jams, properly clear them from the pr inter , and solv e repeated paper jams. Understand printer messages Many different mes[...]

  • Seite 98

    96 Chapter 4 - Problem solving EN Clearing paper jams If the printer control panel displa ys a paper jam message, look f or paper in the locations indicated in the figure on the ne xt page, then see the procedure f or clear ing the paper jam. Y ou might need to look f or paper in other locations than indicated in the paper jam message. If the locat[...]

  • Seite 99

    EN Clearing paper jams 97 P aper jam locations 1 T op co v er and toner car tr idge area 2 Optional en v elope f eeder 3 Input tra y areas 4 Optional duple x er 5 Output areas (top and rear) 6 Fuser area Note Loose toner might remain in the printer after a paper jam and cause output quality prob lems. These should clear up within a f e w pages . 5 [...]

  • Seite 100

    98 Chapter 4 - Problem solving EN Clearing jams fr om the top co ver and toner car tridg e areas 1 Open the top cov er and remov e the toner car tr idge . CA UTION T o pre vent damage to the toner car tr idge , do not e xpose it to light f or more than a f ew minutes . 2 Use the green handle to lift the paper access plate. 3 Slowly pull the paper o[...]

  • Seite 101

    EN Clearing paper jams 99 4 Open tra y 1 and remov e the entrance co ver to chec k fo r additional jammed paper . If paper is present, remov e it. 5 Rotate the paper guide to chec k f or additional jammed paper . If paper is present, remov e it. 6 Replace the entrance co v er and close tra y 1. 7 Reinstall the toner car tr idge and close the top co[...]

  • Seite 102

    100 Chapter 4 - Problem solving EN Clearing jams fr om the optional en velope feeder 1 Remov e any en velopes loaded in the en v elope f eeder . Low er the en v elope weight and lift the tr a y e xtension up to the closed position. 2 Press and hold the release b utton on the left side of the en v e lope feeder . Grasp both sides of the en velope f [...]

  • Seite 103

    EN Clearing paper jams 101 5 Open and close the top cov er to clear the paper jam message. 6 If a paper jam message persists, there is still paper in the printer . Look f or paper in another location (see “ P aper jam locations ” on page 97). 7 Reload en v elopes , making sure that y ou push the bottom en v elopes in slightly fur ther than the [...]

  • Seite 104

    102 Chapter 4 - Problem solving EN Clearing jams fr om the input tra y areas Tr a y 1 Slowly pull the paper out of the printer . If par t of the paper has already been pulled into the printer , f ollo w the steps under “ Clearing jams from the top cov er and toner car tr idge areas ” on page 98. T ra ys 2, 3, and 4 F or all other tra ys , f oll[...]

  • Seite 105

    EN Clearing paper jams 103 4 Mak e sure that all three paper size adjustments are correct (see “ Loading tra ys 2, 3, and 4 ” on page 47). 5 Slide the tra y bac k into the printer . 6 Open and close the top cov er to clear the paper jam message. 7 If a paper jam message persists, there is still paper in the printer . Look f or paper in another [...]

  • Seite 106

    104 Chapter 4 - Problem solving EN Clearing jams fr om the optional duple xer 1 Open the duple xer ’ s rear door . 2 Slowly pull an y paper out of the duple x er . 3 Remov e the duple xer b y lifting it slightly and pulling it out of the printer . 4 F rom the rear of the printer , remov e any paper on top of tr ay 2. (Y ou might need to reach ins[...]

  • Seite 107

    EN Clearing paper jams 105 5 Slowly pull an y paper out of the duple x er . 6 T ur n the duple x er o v er and remo v e any paper . 7 Inser t the duple x er into the pr inter . 8 Open and close the top cov er to clear the paper jam message. 9 If a paper jam message persists, there is still paper in the printer . Look f or paper in another location [...]

  • Seite 108

    106 Chapter 4 - Problem solving EN Clearing jams fr om the output areas Note If most of the paper is still inside the printer , it is best to remov e it through the top cov er area. See “ Clearing jams from the top cov er and toner car tr idge areas ” on page 98. 1 Open the rear output bin. 2 Grasp both sides of the paper , and slowly pull the [...]

  • Seite 109

    EN Clearing paper jams 107 Clearing jams fr om the fuser area Use this procedure: ● when paper has jammed inside the fuser and cannot otherwise be remov ed ● when a page has tor n while y ou were tr ying to clear a jam from the fuser 1 T ur n the printer off . W ARNING! T o a v oid minor burns, wait 30 min utes f or the fuser to cool bef ore co[...]

  • Seite 110

    108 Chapter 4 - Problem solving EN 5 Remov e the rear output bin and e xtension. T o do this, bend the middle down slightly , release tab 1 and then release tab 2. 6 Unloc k the fuser by rotating the b lue fuser le vers so that the y point up . 7 Pull the fuser out of the printer . T o release the fuser from the printer , hold the bac k of the prin[...]

  • Seite 111

    EN Clearing paper jams 109 9 Replace the fuser , left side first. Be sure to push the fuser fir mly into the printer . 10 Loc k the fuser in place b y rotating the le vers to the horizontal position. 11 Replace the rear output bin, left side first. 12 Plug the pow e r cord into the printer . 13 Replace the tra y 2 dust cov er or the optional duple [...]

  • Seite 112

    110 Chapter 4 - Problem solving EN Solving repeated paper jams If paper jams occur frequently , try the follo wing: ● Check all the paper jam locations (see “ Clearing paper jams ” on page 96). A piece of paper might be stuc k some where in the pr inter . Ev en a small tor n piece of paper in the printer path can cause repeated jams. ● If u[...]

  • Seite 113

    EN Understanding printer messages 111 Under standing printer messa ges The tab le in this section e xplains messages that might appear on the printer control panel. Pr inter messages and their meanings are listed in alphabetical order , with n umbered messages f ollowing. If a message persists: ● If a message persists requesting that y ou load a [...]

  • Seite 114

    112 Chapter 4 - Problem solving EN Printer messages Message Explanation or recommended action ACCESS DENIED MENUS LOCKED The printer control panel function you are tr ying to access has been lock ed to pre v ent unauthor ized access . See y our netw or k administrator . BAD DUPLEXER CONNECTION The duple xer is not properly connected to the printer [...]

  • Seite 115

    EN Understanding printer messages 113 DISK FILE OPERATION FAILED The requested operation could not be perf or med. Y ou might hav e attempted an illegal operation, such as tr ying to do wnload a file to a non-e xistent director y . DISK FILE SYSTEM IS FULL Delete files from the EIO disk and then tr y again. Use HP Resource Manager to download or de[...]

  • Seite 116

    114 Chapter 4 - Problem solving EN ENVELOPE FEEDER SIZE = [xxxxx] The printer is asking what size of env elopes has been loaded in the en v elope f eeder . In response, y ou can take either of the f ollowing actions: • press S ELECT to accept the current env elope size • press -V ALUE + to change the siz e and then press S ELECT to accept the n[...]

  • Seite 117

    EN Understanding printer messages 115 INPUT DEVICE CONDITION [xx.yy] An input paper handling de vice has a condition that needs attention bef ore pr inting can resume. T ur n the printer off. Disconnect the cabl e to the input paper handling de vices and then reconnect it. T ur n the printer on. See the documentation that came with the paper handli[...]

  • Seite 118

    116 Chapter 4 - Problem solving EN MEMORY SHORTAGE PAGE SIMPLIFIED The printer had to compress the job in order to fit it in av ailable memor y . Some data loss might hav e occurred. Press G O to continue . The print quality of these pages may not be acceptab le . Reduce the comple xity of these pages and repr int them. Consider adding more memor y[...]

  • Seite 119

    EN Understanding printer messages 117 RAM DISK FILE OPERATION FAILED The requested operation could not be perf or med. Y ou might hav e attempted an illegal operation, such as tr ying to do wnload a file to a non-e xistent director y . RAM DISK FILE SYSTEM IS FULL Delete files and then tr y again, or tur n the printer off , and then tur n the print[...]

  • Seite 120

    118 Chapter 4 - Problem solving EN TRAY 1 LOAD [TYPE] [SIZE] This message occurs f or the follo wing reasons: • tra y 1 was requested from the application, b ut the tra y is empty • the printer cannot find the requested size of paper in the printer If the correct paper size is loaded, the adjustments to the tr a y hav e not been set correctly ,[...]

  • Seite 121

    EN Understanding printer messages 119 TRAY 1 SIZE = [xxxx] The printer is asking what size of paper has been loaded in tra y 1. In response, y ou can take either of the f ollowing actions: • press S ELECT to accept the current paper size • press -V ALUE + to change the siz e and then press S ELECT to accept the new siz e The printer will first [...]

  • Seite 122

    120 Chapter 4 - Problem solving EN WAIT FOR PRINTER TO REINITIALIZE The RAM disk setting has been changed from the printer control panel. This change will not tak e eff ect until the printer reinitializes . If y o u change the mode of the e xter nal de vice, turn the pr inter off , tur n the printer on and wait f or the pr inter to reinitializ e. x[...]

  • Seite 123

    EN Understanding printer messages 121 22 PARALLEL I/O BUFFER OVERFLOW alter nates with PRESS GO TO CONTINUE T oo much data was sent to the par allel por t. Check f or a loose cab le connection and be sure to use a high-quality cable (see “ Ordering inf or mation ” on page 22). (Some non-HP parallel cab les might be missing pin connections or mi[...]

  • Seite 124

    122 Chapter 4 - Problem solving EN 50.x FUSER ERROR A fusing error has occurred. T ur n the pr inter off and then on. 50.4 PRINTER ERROR alter nates with CYCLE POWER TO CONTINUE There is a problem with the po wer supply . Remov e the pr inter from any UPS supplies , additional power supplies, or po wer strips. Plug the printer into a wall outlet an[...]

  • Seite 125

    EN Understanding printer messages 123 55.xx PRINTER ERROR alter nates with CYCLE POWER TO CONTINUE A temporar y printing error occurred. Press G O . The page containing the error will automatically be reprinted if jam recov er y is enab led. If the error does not clear , turn the pr inter off , then tur n the pr inter on. 56.x PRINTER ERROR alter n[...]

  • Seite 126

    124 Chapter 4 - Problem solving EN 66.xx.xx SERVICE ERROR alter nates with CHECK CABLES AND CYCLE POWER An error occurred in an e xter nal paper handling de vice. T ur n the printer off. Disconnect the cabl es to all e xter nal paper handling de vices, and then reconnect them. T ur n the printer on. 68.X PERMANENT STORAGE ERROR alter nates with CHE[...]

  • Seite 127

    EN Understanding printer messages 125 8x.yyyy EIO [z] ERROR The EIO accessor y in slot [z] has encountered a critical error . [z] description: 1 = EIO slot 1 - The printer detected an error with the EIO accessor y . 2 = EIO slot 2 - The printer detected an error with the EIO accessor y . 6 = EIO slot 1 - The EIO accessor y detected an error . The E[...]

  • Seite 128

    126 Chapter 4 - Problem solving EN Mop y disk err or messages The f ollowing tab le lists the disk mopy (m ultiple or iginal cop y) error numbers repor ted on either the Printer Collation or Job Storage Disk Error page, which is printed when an error e xists. Use the HP Resource Manager f or management of the disk (see “ HP Resource Manager ” o[...]

  • Seite 129

    EN Mopy disk error messages 127 55 Bad file system • P ossib le data corruption. Delete the job that prompted the error . • Disk media problem – initialize the hard disk accessor y or reboot to reinit the RAM disk. • If the prob lem persists on a hard drive , replace the hard drive . 56 Hardware f ailure • Replace the hard drive . 59 The [...]

  • Seite 130

    128 Chapter 4 - Problem solving EN Correcting output quality pr oblems This section of the manual helps y ou define pr int quality prob lems and what to do to correct them. Often output quality prob lems can be handled quite easily b y making sure that y our printer is proper ly maintained, using media that meets HP specifications, or running a cle[...]

  • Seite 131

    EN Correcting output quality problems 129 See “ Gra y bac kground ” on page 132 See “ T oner smear ” on page 132 See “ Loose toner ” on page 132 See “ Repeating def ects ” on page 133 See “ Repeating image ” on page 134 See “ Misf or med characters ” on page 134 See “ P age ske w ” on page 134 See “ Curl or wa v e ” [...]

  • Seite 132

    130 Chapter 4 - Problem solving EN Light print (par tial page) 1 The toner car tr idge might be low . Replace the toner car tr idge . 2 Maintenance might be due. Chec k this by printing a cop y of the supplies status page (see “ Supplies status page ” on page 154). If maintenance is due, order and install the printer maintenance kit (see “ P [...]

  • Seite 133

    EN Correcting output quality problems 131 Dr opouts 1 Mak e sure that the en vironmental specifications f or the pr inter are being met (see “ General specifications ” on page 202). 2 If the paper is rough and the toner easily rubs off, either try changing the fuser mode to High 1 or High 2 (see “ P aper Handling Menu ” on page 210), or tr [...]

  • Seite 134

    132 Chapter 4 - Problem solving EN Gra y backgr ound 1 Do not use paper that has already been run through the pr inter . 2 Print a fe w more pages to see if the problem corrects itself . 3 T ur n o ver the stac k of paper in the tra y . Also , tr y rotating the paper 180 ° . 4 At the printer control panel, use the Pr int Quality Menu to decrease t[...]

  • Seite 135

    EN Correcting output quality problems 133 Loose toner Loose toner , in this conte xt, is defined as toner that can be r ub bed off the page. 1 If paper is hea vy or rough, tr y using a high fuser mode so that toner fuses more completely onto the paper . At the printer control panel, use CONFIGURE FUSER MODE MENU in the P aper Handling Menu. T o do [...]

  • Seite 136

    134 Chapter 4 - Problem solving EN Repeating image This type of def ect might occur when using prepr inted f or ms or a large quantity of narrow media. 1 Print a fe w more pages to see if the problem corrects itself . 2 Mak e sure that paper type and quality meet HP specifications (see “ P aper specifications ” on page 188). 3 If y ou obser v e[...]

  • Seite 137

    EN Correcting output quality problems 135 Curl or wa ve 1 T ur n o ver the stac k of paper in the tra y . Also , tr y rotating the paper 180 ° . 2 Mak e sure that paper type and quality meet HP specifications (see “ P aper specifications ” on page 188). 3 Mak e sure that the en vironmental specifications f or the pr inter are being met (see ?[...]

  • Seite 138

    136 Chapter 4 - Problem solving EN Tire trac ks This def ect typically occurs when the toner car tr idge has f ar e xceeded its rated usage of 10,000 pages (f or e x ample, printing a v er y large quantity of pages with v er y little toner cov erage). 1 Replace the toner car tr idge . 2 Reduce the number of pages that y ou pr int with v er y low to[...]

  • Seite 139

    EN Determining printer problems 137 Determining printer pr oblems T r oubleshooting flo wchart If the printer is not responding proper ly , use the flowchar t to deter mine the prob lem. If the printer does not pass a step , f ollow the corresponding troub leshooting suggestions . If y ou cannot resolv e the problem after f ollowing the suggestions[...]

  • Seite 140

    138 Chapter 4 - Problem solving EN 2 Can you print a configuration page (see “ Configuration page ” on page 152)? YES ➜ Go to step 3 . NO A configuration page does not print. A blank page prints. A message other than READY or PRINTING CONFIGURATION is displa yed. • Chec k that all tra ys are properly loaded, adjusted, and installed in the p[...]

  • Seite 141

    EN Determining printer problems 139 3 Can you print from a software application? YES ➜ Go to step 4 . NO The job will not print. A PS error pa g e or list of commands prints • If the job will not print, and a message is display ed on the control panel, see “ Understanding printer messages ” on page 111. • F rom the computer , check to see[...]

  • Seite 142

    140 Chapter 4 - Problem solving EN 4 Does the job print as expected? (Continued on the following page.) NO Print is garbled or only a portion of the page prints Printing stops in the middle of the job. Print speed is slower than expected. A control panel setting is not taking effect. • Chec k that y ou are using the proper printer dr iv er (see ?[...]

  • Seite 143

    EN Determining printer problems 141 Does the job print as expected? (continued) YES ➜ Go to step 5. NO The print job is not formatted correctly. P ages are not fed correctly or are damaged. There are print quality problems. • Chec k that y ou are using the proper printer dr iv er (see “ Choose the right pr inter driver f or y our needs ” on[...]

  • Seite 144

    142 Chapter 4 - Problem solving EN 5 Does the printer select the proper trays, output locations, and paper handling accessories? YES ➜ For other problems, check the Contents, the Index, or the printer software help. NO The printer pulls paper from the wrong tray. An optional accessory is not working properly. A message other than READY is display[...]

  • Seite 145

    EN Determining printer problems 143 T r oubleshooting flo wchart f or Macintosh user s 1 Can you print from a software application? YES ➜ Go to step 2 . NO The Macintosh computer is not communicating with the printer. Auto Setup did not automatically set up the printer. The printer driver icon does not appear in the Chooser. • Mak e sure the pr[...]

  • Seite 146

    144 Chapter 4 - Problem solving EN 2 Does the job print as expected? YES ➜ For other problems, check the Contents, the Index, or the printer online help. NO The print job is not sent to the desired printer. The print job has incorrect fonts. The computer cannot be used while the printer is printing. • Another printer with the same or similar na[...]

  • Seite 147

    EN Determining printer problems 145 Selecting an alternate PPD 1 Open the Chooser from the Apple menu. 2 Clic k the LaserWriter 8 icon. 3 If y ou are on a network with multiple z ones , select the zone in the AppleT alk Zones bo x where the printer is located. 4 Clic k the pr inter name y ou want to use in the Select a P ostScript Printer bo x. (Do[...]

  • Seite 148

    146 Chapter 4 - Problem solving EN T r oubleshooting the optional printer har d disk accessory T r oubleshooting the optional printer har d disk accessory Item Explanation Printer does not recognize the hard disk accessor y . T urn the pr inter off and v er ify that the hard disk accessor y is inser ted correctly and is securely f astened. Pr int a[...]

  • Seite 149

    EN Troubleshooting PS 147 T r oubleshooting PS PS tr oubleshooting Item Explanation A te xt listing of PS commands prints instead of your PS printing job . The control panel PERSONALITY=AUTO setting ma y hav e been confused by a nonstandard PS code. Chec k the PERSONALITY setting to see if it is set to PS or PCL (see “ Configuration Men u ” on [...]

  • Seite 150

    148 Chapter 4 - Problem solving EN T r oubleshooting optional HP F ast InfraRed Receiver pr oblems Troubleshooting HP Fast InfraRed Receiver problems Item Explanation FIR por t status indicator does not light up . Make sure that the printer is in READY mode and that the FIR por t y o u are printing from is IRD A-compliant and within the range of op[...]

  • Seite 151

    EN Troubleshooting optional HP Fast InfraRed Receiver problems 149 The print job has been properly sent, but the printer will not pr int. If the connection is brok en bef ore the entire pr int job has been transmitted to the printer (printing has not yet star ted), the printer ma y not pr int any of the job . Press C ANCEL J OB to clear the printer[...]

  • Seite 152

    150 Chapter 4 - Problem solving EN Comm unicating with an optional HP JetDirect print server If the printer contains an optional HP JetDirect pr int ser v er , and you cannot communicate with the printer ov er the network, verify the operation of the print ser v er . ● Chec k the HP JetDirect configuration page (to print, see “ Configuration pa[...]

  • Seite 153

    EN Checking the printer configuration 151 Chec king the printer configuration F rom the printer control panel, you can print pages that give details about the printer and its current configuration. The f ollowing inf or mation pages are descr ibed here: ● Menu map ● Configuration page ● Supplies status page (includes inf or mation on toner ca[...]

  • Seite 154

    152 Chapter 4 - Problem solving EN Configuration page Use the configuration page to vie w current pr inter settings , to help troub leshoot printer problems , or to v er ify installation of optional accessories, such as memor y (DIMMs), paper tra ys, and printer languages. Note If an HP JetDirect print ser ver card is installed (HP LaserJet 4100N, [...]

  • Seite 155

    EN Checking the printer configuration 153 Configuration page 6 5 4 1 2 3 4100 Series pr inters 1 Printer Information Lists the serial number , HP JetSend IP addresses, page counts, and other inf or mation f or the pr inter . 2 Ev ent Log Lists the number of entries in the e v ent log, the maximum number of entries view able, and the last three entr[...]

  • Seite 156

    154 Chapter 4 - Problem solving EN Supplies status page Use the supplies status page to obtain inf or mation about the toner car tr idge installed in the printer , the amount of toner left in the toner car tr idge , and the number of pages and jobs that ha ve been processed. The page also lets y ou know when y ou should schedule the ne xt pre v ent[...]

  • Seite 157

    EN Checking the printer configuration 155 Supplies status page 1 4 3 5 6 7 2 1 Supplies website Local website f or order ing supplies through the Internet. 2 Car tr idge inf or mation Inf or mation about the amount of toner a v ailable in the toner car tr idge , toner car tr idge par t number , and estimated pages remaining f or the amount of toner[...]

  • Seite 158

    156 Chapter 4 - Problem solving EN PCL or PS f ont list Use the f ont lists to see which f onts are currently installed in the printer . (The f ont lists also sho w which f onts are resident on an optional hard disk accessor y or flash DIMM.) T o print a PCL or PS f o nt list 1 At the printer control panel, press M ENU until INFORMATION MENU appear[...]

  • Seite 159

    EN HP Customer Care Service and Support 157 5 Ser vice and suppor t HP Customer Care Service and Suppor t Online services F or 24-hour access to inf or mation, we suggest the ser vices listed in this section. W orld Wide W eb Printer dr iv ers, updated HP printer software, plus product and suppor t inf or mation ma y be obtained from the follo wing[...]

  • Seite 160

    158 Chapter 5 - Service and support EN Software utilities and electr onic inf ormation Countries /regions C ontact in f o rmation U .S. Monda y - F r ida y: 6:00 am - 10:00 pm MST Saturda y: 9:00 am - 4:00 pm MST Phone: (661) 257-5565 F ax: (661) 257-6995 HP website: http://www .hp .com/ Mail: Hewlett-P ackard Co . P. O . B o x 9 0 7 Santa Clarita,[...]

  • Seite 161

    EN HP Customer Care Service and Support 159 Latin America Ar g entina 8:30 to19:30 hrs. Buenos Aires: Brazil 8:00 to19:00 hrs. S ã o P aulo: Chile 8:30 to18:30 hrs. Chile: Colombia Local dealers provide technical assistance Mexico “ HP Contigo ” 8:00 to18:00 hrs. Me xico: V enezuela 8:00 to18:00 hrs. Caracas: 787 -8080 011-829-6612 800-360999 [...]

  • Seite 162

    160 Chapter 5 - Service and support EN HP direct or dering for accessories or supplies T o order accessories or supplies: ● call (800) 752-0900 (U .S .) or (800) 387-3154 (Canada) ● visit the HP LaserJet supplies website that is local to y our area (print a copy of the supplies status page to learn the URL, as described in “ Supplies status p[...]

  • Seite 163

    EN HP Customer Care Service and Support 161 HP Suppor tP ac ks The HP Suppor tP ac k is a packaged ser vice agreement that upg rades y our basic LaserJet product warr anty (1 year), and e xtends cov erage to 5 y ears. HP Suppor tP acks are sold b y HP resellers and are a vailab le in either a shrink-wrap v ersion f or a 3-year ser vice pac kage onl[...]

  • Seite 164

    162 Chapter 5 - Service and support EN Customer suppor t options w orldwide “ W or ldwide countr y/region sales and ser vice offices ” on page 172 contains addresses and phone numbers f or countries/regions not listed here. HP Customer Care Center and pr oduct repair assistance f or the U .S. and Canada F or technical suppor t and help in ident[...]

  • Seite 165

    EN Customer support options worldwide 163 Eur opean HP Customer Care Center language and in-country options av ailable Open Monda y through F r ida y 8:30 - 18:00 Central European Time (CET) HP provides a free telephone suppor t ser vice during the warranty period. By calling a telephone number listed below , y ou will be connected to a responsiv e[...]

  • Seite 166

    164 Chapter 5 - Service and support EN In-country/region suppor t number s HP provides a free telephone suppor t ser vice during the warranty period. By calling a telephone number listed below , y ou will be connected to a responsiv e team waiting to help y ou. If y ou require suppor t after your w arranty has e xpired, y ou can receive suppor t f [...]

  • Seite 167

    EN Warranty information 165 W arranty inf ormation F or warranty statements , see “ Hewlett-P ac kard limited w arranty statement ” on page 167 and “ Limited warr anty f or toner car tr idge lif e ” on page 169. Y ou can also locate printer warranties on the W orld Wide W eb (see “ World Wide Web ” on page 157). Ser vice dur ing and aft[...]

  • Seite 168

    166 Chapter 5 - Service and support EN Service info rmation f orm WHO IS RETURNING THE EQUIPMENT? Date: P erson to contact: Phone: ( ) Alter nate contact: Phone: ( ) Retur n shipping address: Special shipping instructions: WHA T IS BEING SENT? Model name: Model number : Serial number : Please attach any rele vant print-outs when returning equipment[...]

  • Seite 169

    EN Hewlett-Packard limited warranty statement 167 He wlett-P ac kar d limited warranty statement 1. HP warr ants to you, the end-user customer , that HP hardware, accessories and supplies will be free from def ects in mater ials and workmanship after the date of purchase, f or the period specified abov e. If HP receiv es notice of such def ects dur[...]

  • Seite 170

    168 Chapter 5 - Service and support EN 7 T O THE EXTENT ALLO WED BY LOCAL LA W , THE REMEDIES IN THIS W ARRANTY ST A TEMENT ARE Y OUR SOLE AND EXCLUSIVE REMEDIES . EXCEPT AS INDICA TED ABO VE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF D A T A OR FOR DIRECT , SPECIAL, INCIDENT AL, CONSEQUENTIAL (INCLUDING LOST PR OFIT OR D A T A), O[...]

  • Seite 171

    EN Limited warranty for toner cartridge life 169 Limited warranty f or toner car tridg e life Note The warr anty below applies to the toner car tr idge that came with this printer . This warr anty supersedes all pre vious warranties (7/19/96). The HP toner car tr idge is w arranted to be free from def ects in materials and workmanship for the lif e[...]

  • Seite 172

    170 Chapter 5 - Service and support EN HP software license terms A TTENTION: USE OF THE SOFTW ARE IS SUBJECT T O THE HP SOFTW ARE LICENSE TERMS SET FORTH BELO W . USING THE SOFTW ARE INDICA TES Y OUR A CCEPT ANCE OF THESE LICENSE TERMS. IF Y OU DO NO T A C CEPT THESE LICENSE TERMS, AND THE SOFTW ARE IS BUNDLED WITH ANO THER PRODUCT , Y OU MA Y RETU[...]

  • Seite 173

    EN HP software license terms 171 T ransfer Y our license will automatically ter minate upon any transf er of the Software . Upon transf er , you m ust deliver the Softw are, including an y copies and related documentation, to the transf eree. The transf eree must accept these License T er ms as a condition to the transf er . T ermination HP ma y te[...]

  • Seite 174

    172 Chapter 5 - Service and support EN W orld wide country/region sales and ser vice offices Note Bef ore calling an HP Sales and Ser vice office, be sure to contact the appropriate Customer Care Center number listed in the “ HP Customer Care Ser vice and Suppor t ” section. Products should not be retur ned to these offices. Product return inf [...]

  • Seite 175

    EN Worldwide country/region sales and service offices 173 Finland Hewlett-P ac kard Oy Street Address: Piispankalliontie 17 02200 ESPOO Finland P .O .Box Address: P. O . B o x 6 8 02201 ESPOO Phone Number : 358-9-8872 2100 F ax: 358-9-8872 2923 E-Mail Address: tmodirect@finland.hp .com France Hewlett-P ac kard F rance T est et Mesure Z.A. de Cour t[...]

  • Seite 176

    174 Chapter 5 - Service and support EN Greece G-Systems Hewlett-P ac kard Distributor 76, Ymittou Street 11634 Athens Phone Number : (30/1) 7264045 F ax: (30/1) 7264020 Hungary Hewlett-P ac kard Mag yarorszag KFT . Erzs é bet kir á lyne ú tja 1/c 1146 Budapest Phone Number : (36) 1 4618110 F ax: (36) 1 4618222 Ireland Hewlett-P ac kard Ireland L[...]

  • Seite 177

    EN Worldwide country/region sales and service offices 175 P ortugal Hewlett-P ac kard P or tugal S.A. A v . Marginal, Ed. Parque Oceano Piso 5 ° -G-St ° Amaro de Oeiras 2780 Oeiras Phone Number : (353/1) 482 8500 F ax: (353/1) 441-7071 Romania S&T Romania SRL Hewlett-P ac kard Distributor Centrul Sitraco-Plata Unirii Bd. Dimitries Cantemir 1 [...]

  • Seite 178

    176 Chapter 5 - Service and support EN G ö teborg Hewlett-P ac kard Sv erige AB V ä dursgatan 6 Bo x 5328 S-402 27 G Ö TEBORG Sweden Phone Number : (46/31) 35 18 00 F ax: (46/31) 35 18 99 Switzerland Berne Hewlett-P ac kard (Schweiz) A G Elektronische Me ß technik Meriedweg 11 3172 Niederwangen/Bern Phone Number : (01) 735 72 36 F ax: (01) 735 [...]

  • Seite 179

    EN Worldwide country/region sales and service offices 177 Latin America and South America Ar gentina Hewlett-P ac kard Argentina Monta ñ eses 2140 1428 Buenos Aires Phone Number : (54 1) 787-7115 F ax: (54 1) 787-7287 Belize Atendido por El Salv ador Bolivia Atendido por Uruguay Brazil S ã o P aulo Hewlett-P ac kard Brasil SA R. Aruna 125 T ambor[...]

  • Seite 180

    178 Chapter 5 - Service and support EN Ecuador Complementos Electr ó nicos S .A. A v . General Enr iquez 1800 San Raf ael, Ecuador Phone Number : (593-2) 334257 F ax: (593-2) 331595 El Salv ador SETISA Col. Roma Pje. Carbonell, No . 28 San Salv ador , El Salvador Phone Number : (503) 223-0993 F ax: (503) 279-2077 Guatemala EPTEL 12 A ve . 17-35 Zo[...]

  • Seite 181

    EN Worldwide country/region sales and service offices 179 Asia and the P acific A ustralia Melbourne Hewlett-P ac kard A ustralia Ltd. 31-41 Joseph Street Blackb ur n, VIC 3130 Phone Number : 1 800 629 485 (toll free) Additional phone number(s): (61 3) 9210 5408 F ax: (61 3) 9210-5489 Pe r t h Measurement Innov ation (W A) Pty . Ltd. Kishor n Cour [...]

  • Seite 182

    180 Chapter 5 - Service and support EN Xi'an Branch Office 3/F East New T echnology T rade Center A16 Y anta Lu Zhong Duan Xi'an 710054 PRC Phone Number : (86/29) 552 9379 F ax: (86/29) 552 9243 Hong K ong Hewlett-P ac kard Co ., Ltd. 17-21/F Shell T ower , Times Square 1 Matheson Street Causew ay Ba y Hong K ong SAR Phone Number : (852) [...]

  • Seite 183

    EN Worldwide country/region sales and service offices 181 Indonesia Bandung P .T . Berca Harda y aperkasa Jalan T engku Angkasa No . 33 Bandung 40132 Phone Number : (62-22) 250-8100 F ax: (62-22) 250-6757 Jakar ta P .T . Berca Harda y aperkasa Jalan Abdul Muis No . 62 Jakarta 10160-Indonesia Phone Number : (62/21) 380 0902 F ax: (62/21) 381 2044 K [...]

  • Seite 184

    182 Chapter 5 - Service and support EN Singapore Hewlett-P ac kard Singapore (Sales) Pte Ltd 450 Ale x andra Road Singapore 119960 Phone Number : 65 275 3888 Additional phone number(s): HP Direct: 1 800 292-8100 Application Suppor t: 65-374-4242 Hardware Service Hotline: 65-375-8350 F ax: 65 274 7887 Sri Lanka Precision T echnical Ser vices (PVT) L[...]

  • Seite 185

    EN Worldwide country/region sales and service offices 183 Ibaraki Hewlett-P ac kard Japan Ltd. Mito Y omiur i-Kaikan Bldg. 2-4-2 Minami-machi, Mito-shi Ibaraki 310 Hewlett-P ac kard Japan Ltd. Tsukuba-Mitsui Bldg. 1-6-1 T akez ono , Tsukuba-shi Ibaraki 305 Ishikawa Hewlett-P ac kard Japan Ltd. Kanazaw a MK Bldg. 98-8 Sainen-machi, Kanazaw a-shi Ish[...]

  • Seite 186

    184 Chapter 5 - Service and support EN Middle East and Africa Algeria R TI Algeria 26, Bis rue Mohammed Hadj-Ahmed (e x. Rue Jean Pierre Dinet) 16035 Hydra Alger Algerie Phone Number : 213-2-606450 Angola Handled by HP South Africa Bahrain BAMTEC P .O . Box 10373 Capital centre Shop 116 Road 1405 Area 314 Manama Phone Number : 9-73-275678 F ax: 9-7[...]

  • Seite 187

    EN Worldwide country/region sales and service offices 185 Mor occo SICO TEL Comple x e des Habous T our C, a venue des F ar Casablanca 01 Phone Number : +212 (02) 31-22-70 F ax: +212 (02) 31-65-45 T elex: 27604 Mozambique Handled by HP South Africa Namibia Handled by HP South Africa Nigeria Management Inf ormation Systems Co . Ltd. 3 Gerrard Road P[...]

  • Seite 188

    186 Chapter 5 - Service and support EN United Arab Emirates Emitac Ltd. Block RBS Arenco Bldg. Zabel Road P .O . Box 8391 Dubai Phone Number : (971/4) 37-75-91 F ax: (971/4) 37-08-99 Emitac Ltd. P .O . Box 2711 Abu Dhabi Phone Number : (971/2) 77-04-19 F ax: (971/2) 72-30-58 Zambia Handled by HP South Africa Zimbabwe Handled by HP South Africa[...]

  • Seite 189

    EN Overview 187 A Specifications Overview This appendix includes: ● paper specifications ● printer specifications ● product compatibility matrix[...]

  • Seite 190

    188 Appendix A - Specifications EN P aper specifications HP LaserJet printers produce ex cellent print quality . This pr inter accepts a v a riety of media, such as cut-sheet paper (including recycled paper), en v elopes , labels, tr ansparencies, and custom-size paper . P aper proper ties such as weight, gr ain, and moisture content are impor tant[...]

  • Seite 191

    EN Paper specifications 189 Suppor ted sizes and weights of paper Suppor ted sizes and weights of paper (one-sided printing) - tray 1 a Size Dimensions b W eight Capacity c P aper (custom minimum siz e) 76 by 127 mm (3 by 5 in) 60 to 199 g/m 2 (16 to 53 lb) 100 sheets of 75 g/m 2 (20 lb) paper P aper (maximum size) 216 b y 356 mm (8.5 by 14 in) T r[...]

  • Seite 192

    190 Appendix A - Specifications EN Suppor ted sizes and weights of paper - trays 2, 3, and 4 Size Dimensions a We i g h t C a p a c i t y b Letter 216 by 279 mm (8.5 b y 11 in) 60 to 105 g/m 2 (16 to 28 lb) 500 sheets of 75 g/m 2 (20 lb) paper 50 transparencies A4 210 by 297 mm (8.3 b y 11.7 in) Ex ecutive 191 b y 267 mm (7.3 b y 10.5 in) Ex ecutiv[...]

  • Seite 193

    EN Paper specifications 191 Suppor ted sizes and weights of paper - optional en velope feeder Size Dimensions W eight Capacity Monarch (#7-3/4) 98.4 by 190.5 mm (3.88 b y 7.50 in) 75 to 105 g/m 2 (20 to 28 lb) 75 en v elopes Commercial 10 (#10) 104.9 by 241.3 mm (4.13 b y 9.5 in) DL ISO 110 b y 220 mm (4.33 b y 8.66 in) C5 ISO 162 b y 229 mm (6.38 [...]

  • Seite 194

    192 Appendix A - Specifications EN Suppor ted types of paper The printer suppor ts the f ollowing types of paper : Guidelines f or using paper F or best results, use con v entional 75 to 90 g/m 2 (20 to 24 lb) paper . Mak e sure the paper is of good quality , and free of cuts, nic ks, tears , spots, loose par ticles, dust, wrinkles, v oids, and cur[...]

  • Seite 195

    EN Paper specifications 193 Note Do not use letterhead paper that is printed with low-temperature inks , such as those used in some types of ther mogr aphy . Do not use raised letterhead. The printer uses heat and pressure to fuse toner to the paper . Make sure that any colored paper or preprinted f or ms use inks that are compatib le with the prin[...]

  • Seite 196

    194 Appendix A - Specifications EN P aper weight equiv alence table Use this tab le to deter mine appro ximate equiv alent points in weight specifications other than U .S . bond weight. F or e xample, to deter mine the equiv alent of 20 lb U .S . bond weight paper in U .S. co v er weight, locate the bond weight (in ro w 3, second column) and scan a[...]

  • Seite 197

    EN Paper specifications 195 66 169 92 114 138 154 250 67 171 94 115 140 155 253 70 178 98 120 146 162 264 72 183 100 123 150 166 271 a. U .S . postcard measurements are appro ximate. Use f or ref erence only . b. Text and book grades actually calculate out to 51, 61, 71, and 81, but are standardized to book/text weights of 50, 60, 70, and 80. U. S [...]

  • Seite 198

    196 Appendix A - Specifications EN Labels CA UTION T o av oid damaging the pr inter , use only labels recommended for use in laser printers. If y ou ha v e prob lems printing labels, use tra y 1 and open the rear output bin. Do not print on the same sheet of labels more than once — peeling and adhesiv e contamination might result. Label construct[...]

  • Seite 199

    EN Paper specifications 197 En velopes En velope construction En v elope construction is cr itical. En v elope f old lines can v ar y considerab ly , not only between manuf acturers, b ut also within a bo x from the same manuf acturer . Successful printing on env elopes depends upon the quality of the en v elopes. When selecting en v elopes , consi[...]

  • Seite 200

    198 Appendix A - Specifications EN En velope mar gins The f ollowing tab le gives typical address margins f or a Commercial #10 or DL en v elope. Note F or the best pr int quality , position margins no closer than 15 mm (0.6 in) from the edges of the en v elope. En velope stora ge Proper storage of en velopes helps contrib u te to good print qualit[...]

  • Seite 201

    EN Paper specifications 199 Car d stock construction ● Smoothness: Card stoc k should ha v e smoothness in the range of 100 to 180 Sheffield. ● Construction: Card stoc k should lie flat with less than 5 mm (0.2 in) of curl. It should be shor t grain paper to impro ve f eeding and reduce wear on the printer . ● Condition: Mak e sure card stoc [...]

  • Seite 202

    200 Appendix A - Specifications EN Printer specifications Ph ysical dimensions HP LaserJet 4100/4100N 475 mm (18.7 in) top cov er open 345 mm (13.6 in) top cov er closed HP LaserJet 4100TN/4100DTN 595 mm (23.4 in) top cov er open 465 mm (18.3 in) top cov er closed 1043 mm (41.1 in) full length (tra ys and rear output bin open) 506 mm (19.9 in) tra [...]

  • Seite 203

    EN Printer specifications 201 Printer weight (without toner car tridge) En vironmental specifications Electrical specifications V alues are subject to change. See http://www .hp .com/suppor t/lj4100 f or current inf or mation. HP LaserJet 4100/4100N printers 18 kg (39 lb) HP LaserJet 4100TN printer 25 kg (55 lb) HP LaserJet 4100DTN printer 28 kg (6[...]

  • Seite 204

    202 Appendix A - Specifications EN Acoustic emissions (per ISO 9296) General specifications Printer state Sound po wer le vel a Bystander position Printing, 25 pages per minute (ppm) L Wa d = 6.6 bels (A) 52 L pAm decibels (A) Po w e r S a v e L wad = 4.1 bels (A) 26 L pAm decibels (A) a. You might want to install printers with sound power L Wad &g[...]

  • Seite 205

    EN Product compatibility matrix 203 Pr oduct compatibility matrix Pr oduct compatibility matrix Pr oduct Pr oduct numb er HP LaserJet printer 4000 series 4050 series 4100 series En v elope f eeder C4122A C8053A ● ● ● ●● Duple x pr inting accessor y (duple xer) C4123A C8054A ● ● ● ●● To n e r c a r t r i d g e s 6,000 pages 10,00[...]

  • Seite 206

    204 Appendix A - Specifications EN Memory 4 MB EDO DIMM 8 MB EDO DIMM 16 MB EDO DIMM 4 MB SDRAM DIMM 8 MB SDRAM DIMM 8 MB SDRAM DIMM 16 MB SDRAM DIMM 16 MB SDRAM DIMM 24 MB SDRAM DIMM 32 MB SDRAM DIMM 32 MB SDRAM DIMM 64 MB SDRAM DIMM 64 MB SDRAM DIMM 128 MB SDRAM DIMM 2 MB flash DIMM 4 MB flash DIMM C4135A C4136A C4137A C4140A C4141A C7842A C4142A[...]

  • Seite 207

    EN Overview 205 B Control panel men us Overview Y ou can perf or m most routine pr inting tasks from the computer through the printer dr iv er or software application. This is the most con v enient wa y to control the pr inter , and will o v err ide the printer control panel settings. See the help files associated with the softw are, or f or more i[...]

  • Seite 208

    206 Appendix B - Control panel menus EN Quic k Copy Jobs Men u This menu pro vides a list of the quick cop y jobs stored on the printer ’ s hard disk accessor y . The user can print or delete these jobs from the control panel. See “ Job retention f eatures ” on page 72 f or more inf or mation about using this menu. Note This menu appears only[...]

  • Seite 209

    EN Private/Stored Jobs Menu 207 Priv ate/Stored Jobs Menu This menu pro vides a list of the stored jobs on the pr inter ’ s hard disk accessor y . The user can pr int or delete these jobs from the control panel. See “ Printing a pr iv ate job ” on page 76 and “ Stor ing a print job ” on page 78 f or more inf or mation about using this men[...]

  • Seite 210

    208 Appendix B - Control panel menus EN Inf ormation Menu This menu contains printer inf or mation pages that give details about the printer and its configuration. T o pr int an inf o r mation page, scroll to the desired page and press S ELECT . Inf ormation Menu Item Explanation PRINT MENU MAP The menu map sho ws the la yout and current settings o[...]

  • Seite 211

    EN Information Menu 209 PRINT SUPPLIES STATUS The supplies status page shows toner car tridge information, statistics on the total number of pages and jobs processed, toner car tr idge manuf acture date, serial number , page counts , and maintenance inf or mation. PRINT PAPER PATH TEST The paper path test can be used to v erify that the paper path [...]

  • Seite 212

    210 Appendix B - Control panel menus EN P aper Handling Men u When paper handling settings are correctly configured through the control panel, y ou can print by choosing the type and size of paper from the printer dr iv er or softw are application. F or more information, see “ Printing by type and siz e of paper (loc king tra ys) ” on page 70. [...]

  • Seite 213

    EN Paper Handling Menu 211 TRAY 1 TYPE= PLAIN F or suppor ted paper types, see “ Suppor ted types of paper ” on page 192. This item appears only when TRAY 1 MODE= CASSETTE . Set the v alue to correspond with the paper type currently loaded in tra y 1. TRAY 2 TYPE= PLAIN F or suppor ted paper types, see “ Suppor ted types of paper ” on page [...]

  • Seite 214

    212 Appendix B - Control panel menus EN SMALL PAPER SPEED=NORMAL NORMAL SLOW Select SLOW when alter nately printing en v elopes (or small paper) and standard paper sizes and print problems appear . Be sure to retur n the speed to NORMAL when finished. When slow is selected, the printer briefly pauses between pages to reduce a repeating image def ec[...]

  • Seite 215

    EN Printing Menu 213 Printing Menu Some items in this menu can be accessed from a softw are application, or from the printer dr iv er (if the appropr iate driver is installed). Printer dr iv er and software application settings ov err ide control panel settings. F or more inf or mation, see “ Using f eatures in the printer dr iv er ” on page 65[...]

  • Seite 216

    214 Appendix B - Control panel menus EN UNIT OF MEASURE=INCHES (110V printers) or MILLIMETERS (220V printers) INCHES MILLIMETERS This item appears only when CONFIGURE CUSTOM PAPER=YES . Select the unit of measurement f or the custom paper size. X DIMENSION= 8.50 INCHES (110V printers) or 216 MILLIMETERS (220V printers) For supported paper sizes, se[...]

  • Seite 217

    EN Printing Menu 215 PCL FONT NUMBER= 0 0 to 999 The printer assigns a number to each f ont and lists them on the PCL f ont list (see “ PCL or PS f ont list ” on page 156). The f o nt number appears in the F ont # column of the printout. Note It is best to set the f ont number from the printer dr iv er or software application. (Driver and softw[...]

  • Seite 218

    216 Appendix B - Control panel menus EN COURIER FONT= REGULAR REGULAR DARK Select the v ersion of Courier f ont to use: REGULAR : The inter nal Courier f ont av ailable on the HP LaserJet 4 series printers. DARK : The inter nal Courier f ont a v ailab le on the HP LaserJet III series pr inters . Both f onts are not av ailable at the same time. WIDE[...]

  • Seite 219

    EN Print Quality Menu 217 Print Quality Menu Some items in this menu can be accessed from a softw are application, or from the printer dr iv er (if the appropr iate driver is installed). Printer dr iv er and software application settings ov err ide control panel settings. F or more inf or mation, see “ Using f eatures in the printer dr iv er ” [...]

  • Seite 220

    218 Appendix B - Control panel menus EN ECONOMODE=OFF OFF ON T ur n EconoMode on (to sav e toner) or off (f or high quality). EconoMode creates draft-quality printing by reducing the amount of toner on the printed page. Caution HP does not recommend full-time use of EconoMode. (If EconoMode is used full-time , it is possible that the toner supply w[...]

  • Seite 221

    EN Configuration Menu 219 Configuration Menu Items in this menu aff ect the printer ’ s beha vior . Configure the printer according to y our printing needs. Configuration Menu Item V alues Explanation POWERSAVE TIME= 30 MINUTES 1 MINUTE 15 MINUTES 30 MINUTES 1 HOUR 2 HOURS 4 HOURS Set how long the printer remains idle bef ore it enters P ow erSa [...]

  • Seite 222

    220 Appendix B - Control panel menus EN CLEARABLE WARNINGS=JOB JOB ON Set the amount of time that a clearab le war ning is displa yed on the printer control panel. JOB : W ar ning messages displa y on the control panel until the end of the job from which they were gener ated. ON : W ar ning messages displa y on the control panel until G O is presse[...]

  • Seite 223

    EN Configuration Menu 221 PRINT PS ERRORS= OFF OFF ON Select ON to print the PS error page when PS errors occur . RAM DISK=AUTO OFF ON AUTO Deter mine ho w the RAM disk is configured. This item appears only if there is no optional hard disk accessor y installed and the printer has at least 16 MB of memor y . OFF : The RAM disk is disabled. ON : The[...]

  • Seite 224

    222 Appendix B - Control panel menus EN I/O Menu Items in the I/O (input/output) Menu aff ect the communication between the printer and the computer . I/O Menu Item V alues Explanation PARALLEL ADV COMMUNICATN=ON ON OFF T ur n the bidirectional parallel communication on or off . The default is set f or a bidirectional parallel por t (IEEE-1284). Th[...]

  • Seite 225

    EN Resets Menu 223 Resets Menu Use the reset and restore options on this menu with caution. Y ou can lose b uff ered page data or pr inter configuration settings when y ou select these items. Only reset the printer under the f ollowing circumstances: ● y ou want to restore the printer ’ s def ault settings ● communication betw een the printer[...]

  • Seite 226

    224 Appendix B - Control panel menus EN POWERSAVE= ON ON OFF This item tur ns P o werSa ve mode on or off . P ow erSa v e mode does the follo wing: • minimizes the amount of po wer consumed by the printer when it is idle • reduces wear on the printer ’ s electronic components (tur ns off the displa y ’ s backlight) When y o u send a print j[...]

  • Seite 227

    EN EIO Menu 225 EIO Menu The EIO (enhanced input/output) Menu appears only when an EIO de vice is installed in an EIO slot on the pr inter (such as an HP JetDirect print ser v er). The items in the menu depend on the par ticular accessor y product installed. If the pr inter contains an HP JetDirect print ser v er EIO card, you can configure basic n[...]

  • Seite 228

    226 Appendix B - Control panel menus EN CFG IPX/SPX=NO NO YES Select whether y o u want to access the IPX/ SPX menu and set IPX/SPX protocol parameters . NO : Bypass the IPX/SPX menu items . YES : Access the IPX/SPX menu items . In the IPX/SPX menu, y o u can specify the frame type parameter used on y our network. The def ault is AUTO , to automati[...]

  • Seite 229

    EN EIO Menu 227 CFG LINK=NO NO YES Select whether y ou want to man ually configure the HP JetDirect 10/100Base-TX print ser ver ’ s network link speed and communication mode . The HP JetDirect settings must match the network. NO: Bypass the link configuration men u items. YES: Access the link configuration men u items. One of the f ollowing link [...]

  • Seite 230

    228 Appendix B - Control panel menus EN[...]

  • Seite 231

    EN Overview 229 C Pr inter memor y and e xpansion Overview The printer has three dual in-line memor y module (DIMM) slots f or upgrading with: ● more printer memor y — DIMMs are av ailable in 4, 8, 16, 32, 64, and 128 M B , f or a maxi m um of 256 MB ● flash memor y DIMMs — a v ailable in 2 and 4 MB; unlik e standard printer memor y , flash[...]

  • Seite 232

    230 Appendix C - Printer memory and expansion EN Installing memory CA UTION Static electricity can damage dual in- line memor y modules (DIMMs). When handling DIMMs, either w ear an antistatic wrist strap or frequently touch the surf ace of the DIMM ’ s antistatic pac kage , then touch bare metal on the printer . If y ou ha v e not already done s[...]

  • Seite 233

    EN Installing memory 231 6 Remov e the DIMM from the antistatic pac kage . Hold the DIMM with fingers against the side edges and thumbs against the bac k edge. Align the notches on the DIMM with the DIMM slot. (Chec k that the loc ks on each side of the DIMM slot are open, or outward.) 7 Press the DIMM straight into the slot (press fir mly). Mak e [...]

  • Seite 234

    232 Appendix C - Printer memory and expansion EN Chec king memor y installation F ollow this procedure to v er ify that DIMMs are installed correctly: 1 Chec k that the printer control panel displays READY when the printer is tur ned on. If an error message appears, a DIMM might ha v e been incorrectly installed. Check the printer messages (see “[...]

  • Seite 235

    EN Installing EIO cards/mass storage 233 Installing EIO car ds/mass storage F ollow this procedure to install an EIO card or mass storage de vice: 1 T ur n the printer off . 2 Remov e the two scre ws and cov er plate from the EIO 1 or EIO 2 slot on the bac k of the printer . 3 Install the EIO card or mass storage de vice in the EIO slot and tighten[...]

  • Seite 236

    234 Appendix C - Printer memory and expansion EN[...]

  • Seite 237

    EN Overview 235 D Pr inter commands Overview Most software applications do not require y ou to enter pr inter commands. See y our computer and software documentation to find the method f or enter ing pr inter commands, if needed. Note The tab le at the end of this appendix contains commonly used PCL 5e commands (see “ Common PCL 5e printer comman[...]

  • Seite 238

    236 Appendix D - Printer commands EN Under standing PCL 5e printer command syntax Bef ore using pr inter commands, compare these char acters: Many printer commands use the low ercase letter l (l) and the number one (1) , or the uppercase letter O (O) and the number z ero (0) . These characters ma y not appear on y our screen as shown here . Y ou mu[...]

  • Seite 239

    EN Understanding PCL 5e printer command syntax 237 Combining escape sequences Escape sequences ma y be combined into one escape sequence string. There are three impor tant r ules to f ollow when combining code: 1 The first two char acters after the ? char acter (the par ameterized and group char acters — see the figure on the pre vious page) must[...]

  • Seite 240

    238 Appendix D - Printer commands EN Selecting PCL 5e f onts The printer font list pro vides PCL 5e pr inter commands f or selecting f onts (see “ PCL or PS font list ” on page 156 f or inf or mation how to print the list). A sample section is shown below . There is one v ar iable bo x f or enter ing symbol sets and one f or entering point size[...]

  • Seite 241

    EN Understanding PCL 5e printer command syntax 239 Common PCL 5e printer commands Common PCL 5e printer commands Function Command Options (#) Job control commands Reset ?E n/a Number of copies ?&l#X 1 to 999 2-sided/1-sided printing ?&l#S 0 = Simplex (1-sided) printing 1 = Duple x (2-sided) with long edge binding 2 = Duple x (2-sided) with [...]

  • Seite 242

    240 Appendix D - Printer commands EN Page control commands (continued) To p M a r g i n ?&l#E # = number of lines T ext Length (bottom margin) ?&l#F # = number of lines from top margin Left Margin ?&a#L # = column number Right Margin ?&a#M # = column number from left margin Horizontal Motion Inde x ?&k#H 1/120-inch increments (c[...]

  • Seite 243

    EN Understanding PCL 5e printer command syntax 241 Font selection Symbol Sets ?(# 8U = HP Roman-8 Symbol Set 10U = IBM La yout (PC-8) (code page 437) Def ault Symbol Set 12U = IBM La yout f or Europe (PC-850) (code page 850) 8M = Math-8 19U = Windows 3.1 Latin 1 9E = Windows 3.1 Latin 2 (commonly used in Eastern Europe) 5T = Windows 3.1 Latin 5 (co[...]

  • Seite 244

    242 Appendix D - Printer commands EN[...]

  • Seite 245

    EN FCC regulations 243 E Regulator y inf or mation FCC regulations This equipment has been tested and f ound to comply with the limits f or a Class B digital device , pursuant to P ar t 15 of the FCC r ules . These limits are designed to provide reasonab le protection against har mful interf erence in a residential installation. This equipment gene[...]

  • Seite 246

    244 Appendix E - Regulatory information EN En vir onmental pr oduct ste war dship pr ogram Pr otecting the en vir onment He wlett-P ackard Compan y is committed to pro viding quality products in an en vironmentally-sound manner . The HP LaserJet pr inter has been designed with se ver a l attributes to minimiz e impacts on the en vironment. This HP [...]

  • Seite 247

    EN Environmental product stewardship program 245 This HP LaserJet printer also contr ib utes to protecting the en vironment in the f ollowing wa ys: ● Plastics marking f or recyc ling Plastic par ts ov er 25 grams ha ve markings according to inter national standards that enhance the ability to identify plastics f or recycling pur poses at the end[...]

  • Seite 248

    246 Appendix E - Regulatory information EN ● Non-U .S. recyc ling returns F or non-U .S. retur ns , chec k the toner car tr idge recycling inf or mation in the bo x f or instructions on recycling in y our countr y . If y our countr y is not listed or f or fur ther inf or mation on the Planet P ar tners program, contact y our local HP Sales and Se[...]

  • Seite 249

    EN Environmental product stewardship program 247 Dec laration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer ’ s Name: Hewlett-P ack ard Company Manufacturer ’ s Address: 11311 Chinden Boule v ard Boise, Idaho 83714-1021, USA dec lares that the pr oduct Product Name: HP LaserJet 4100 / 4100N / 4100TN / 4100DTN / 4100SE Mo[...]

  • Seite 250

    248 Appendix E - Regulatory information EN Safe ty statements Laser safety statement The Center f or Devices and Radiological Health (CDRH) of the U .S. F ood and Dr ug Administration has implemented regulations f or laser products manuf actured since A ugust 1, 1976. Compliance is mandator y f or products mar k eted in the United States. The print[...]

  • Seite 251

    EN Safety statements 249 Laser statement f or Finland Luokan 1 laserlaite Klass 1 Laser Apparat HP LaserJet 4100, 4100N, 4100TN, 4100DTN laserkirjoitin on k ä ytt ä j ä n kannalta tur vallinen luokan 1 laserlaite. Nor maalissa k ä yt ö ss ä kirjoittimen suojakotelointi est ää lasers ä teen p ää syn laitteen ulk opuolelle. Laitteen turval[...]

  • Seite 252

    250 Appendix E - Regulatory information EN Va r n i n g ! Om laser printer ns skyddsh ö lje ö ppnas d å apparaten ä r i funktion, uts ä ttas an v ä ndaren f ö r osynlig laserstr å lning. Betr akta ej str å len. Tiedot laitteessa k ä ytett ä v ä n laserdiodin s ä teily ominaisuuksista: Aallonpituus 775-795 nm Te h o 5 m W Luokan 3B lase[...]

  • Seite 253

    EN Overview 251 F Embedded w eb ser v er Overview This printer comes equipped with an embedded web ser v er . Accessing the embedded web ser v er from your PC ’ s standard web bro wser lets you obtain inf or mation about the pr inter , including: ● control panel messages ● consumab le le vels ● tra y configuration ● printer control panel [...]

  • Seite 254

    252 Appendix F - Embedded web server EN Accessing the embedded web server Note T o use the embedded web ser v er , you must ha v e an IP-based network and web bro wser . T ype the IP address assigned to the printer into your web bro wser to access the embedded web ser v er . F or example , if the pr inter ’ s IP address is 123.456.789.123, y ou w[...]

  • Seite 255

    EN Embedded web server pages 253 Home pages The home pages of the embedded web ser v er are the inf or mational pages f or the pr inter . These include: ● Printer status page This page shows the printer control panel and the message that is currently displa y ed. The different control panel status lights and b uttons are also displa yed, so y ou [...]

  • Seite 256

    254 Appendix F - Embedded web server EN ● Or der supplies page The remaining lif e of the diff erent consumables is sho wn on this page, and the links to the HP w ebsite f or ordering supplies is also displa yed. ● Contact inf ormation page The name and e-mail address of the primar y point of contact for inf or mation about the pr inter is ente[...]

  • Seite 257

    EN Index 255 Inde x Symbols ? in control panel messages 31 on control panel 29 Numerics 100-sheet paper tray. See tray 1 10Base-T cards, ordering 22 10Base-TX cards, ordering 22 1200 dpi, setting resolution to 217 2-sided printing. See duplexing 2-up printing 67 300 dpi, setting resolution to 217 3-hole punched paper 51 500-sheet paper tray bad con[...]

  • Seite 258

    256 Index EN canceling print jobs from control panel 30 with embedded web server 251 capacity 500-sheet paper tray 190 circuit 201 duplexer 191 envelope feeder 191 tray 1 189 trays 2, 3, 4 190 card stock 198 carriage return/line feed setting 216 cartridges. See toner cartridges cassette mode description 69 setting for tray 1 210 CD for HP Support A[...]

  • Seite 259

    EN Index 257 253 configure printer page (embedded web server) 253 configuring alerts 94 control panel messages 40 custom paper 213 embedded web server language 254 fuser mode 212 HP JetDirect card with embedded web server 254 network parameters 225 Novell NetWare parameters 41 number of quick copy jobs 221 printer 13 printer drivers 36 printer for [...]

  • Seite 260

    258 Index EN parts information 160 service agreements 160 worldwide support options 162 Customization Utility 36 customizing See also configuring tray 1 operating 69 trays used for printing 68 custom-size paper guidelines for printing 63 margins 63 printing 63 printing to rear output bin 45 setting paper size 63 supported sizes and weights in tray [...]

  • Seite 261

    EN Index 259 ordering 22 paper orientation 51 supported paper sizes 49 supported paper sizes and weights 191 troubleshooting 110 using with rear output bin 50 duplexer. See duplex printing accessory duplexing binding options 52 booklets 66 description 49 guidelines 50 location of option in control panel menus 211 dust cover location 20 tray 2 and d[...]

  • Seite 262

    260 Index EN viewing 208 event log page (embedded web server) 253 exiting control panel menus 30 expanding memory 229 printer capability 229 extended warranty 246 extension for tray 1 46 F face-down output bin 44 face-up output bin 45 Fast Infrared (FIR) description of receiver 80 IRDA compliance 148 ordering receiver 22 printing with 80 receiver p[...]

  • Seite 263

    EN Index 261 guidelines card stock 63, 199 custom-size paper 63 duplexing 50 envelopes 55, 197 labels 61, 196 paper 188, 192 transparencies 62, 196 H hard disk accessory illustration 21 installing 233 ordering 22 hardware defects 167 packing 165 returning 165 shipping 165 warranty 167, 246 heavy paper fuser mode 212 printing 45, 63 specifications 1[...]

  • Seite 264

    262 Index EN infrared installing software 80 printing with 80 input trays bad connection message 112 cannot feed paper 112 clearing paper jams 102 empty condition message 117 location 19 locking 70 orienting paper for duplexing 51 understanding order used 68 input/output communication settings 222 inserting envelope feeder 58 installed personalitie[...]

  • Seite 265

    EN Index 263 LaserJet paper. See HP LaserJet paper LaserJet Utility. See HP LaserJet Utility LaserWriter printer driver 40 latest printer drivers 33 layout options duplexing 52 printing multiple pages on one sheet 67 LEDs on control panel 29 length of printing on page 214 letterhead paper duplexing 51 printing 53 letter-size paper, printing instead[...]

  • Seite 266

    264 Index EN specifications 202 upgrading 229 Menu key 30 menu map location in control panel menus 208 printing 32, 151 menu tree. See menu map menus. See control panel menus messages clearing persistent 111 customizing 40 list, explanation, and recommended action 112 understanding 111 Microsoft Windows configuring drivers 36 network software 33 pr[...]

  • Seite 267

    EN Index 265 orientation setting 214 orienting label sheets 61 special paper 54 transparencies 62 OS/2 printer drivers 35 other links page (embedded web server) 254 output bins clearing paper jams 106 location 20 using 44 overhead transparencies. See transparencies override A4 with letter setting 216 overriding printer settings 36 ozone production [...]

  • Seite 268

    266 Index EN printing 156 PDF (portable document format) documents browsing with thumbnails 11 finding information 10 finding words 11 icons 9 increasing and decreasing magnification 10 navigating 9 printing 11 using 9 viewing 10 perform printer maintenance message 93 permanent fonts 156 permanent resources for printer 232 personal identification n[...]

  • Seite 269

    EN Index 267 print speed 202, 217 printer cleaning 88 compatibility matrix 203 configurations 18 configuring settings with embedded web server 253 control panel description and illustration 29 current settings 151 dimensions 200 features and benefits 16 help software 37 maintenance 93 managing and troubleshooting remotely 41 managing internal resou[...]

  • Seite 270

    268 Index EN watermarks 66 with infrared receiver 80 Printing Menu 213 private job deleting 77 printing 76 releasing 76 specifying 76 Private/Stored Jobs Menu 207 problems. See troubleshooting Process Cleaning Page setting 218 product compatibility matrix 203 repair 162 return 166 stewardship program 244 programming hint commands for printer 240 pr[...]

  • Seite 271

    EN Index 269 resellers, HP authorized 160 Reset Memory setting 223 Resets Menu 223 resetting the printer 223 resolution dpi capabilities 16 FastRes 16 levels of gray 16 ProRes 16 Resolution Enhancement technology (REt) setting 217 resolution setting 217 Resource Manager. See HP Resource Manager resource saving 232 Restore Factory Settings 223 resto[...]

  • Seite 272

    270 Index EN cycling through and selecting at control panel 30 envelope size 210 input/output communication 222 jam recovery 220 maintenance message 220 number of quick copy jobs 221 printer driver versus software program 32 printer personality (language) 221 protocol 225 PS error page 221 RAM disk 221 saving at control panel 30 saving printer 66 t[...]

  • Seite 273

    EN Index 271 recycling outside U.S. 246 usage report 154 website 245 supplies page (embedded web server) 253 supplies status page description 155 location in control panel menus 209 printing 154 Support Assistant 160 support. See customer support SupportPacks 161, 246 SuSE Linux 41 switching printer languages 37, 221 symbol set for PCL 215 Symphony[...]

  • Seite 274

    272 Index EN setting size from control panel 70 setting type 211 supported paper sizes and weights 189 tray 2 adjusting for paper 47 bad connection message 112 clearing paper jams 102 description 47 load message 118 loading 47 location 19 orienting paper for duplexing 51 orienting special paper 54 setting size from control panel 70 setting type 211[...]

  • Seite 275

    EN Index 273 wavy paper problem 135 Web JetAdmin. See HP Web JetAdmin web server. See embedded web server websites Adobe Acrobat Reader 12 HP JetSend 38 HP Planet Partners program 245 HP Support Packs 161 HP Web JetAdmin 41 linking with embedded web server 254 material safety data sheet (MSDS) 246 parts identification and pricing 160 printer softwa[...]

  • Seite 276

    274 Index EN[...]

  • Seite 277

    [...]

  • Seite 278

    http://www .hp.com/su pport/lj4100 cop y r igh t © 200 2 Hew let t-P ack ar d Compan y[...]