HP 600s Bedienungsanleitung

DEC 3000 Model 600/600S/700 AXP Owner ’ s Guide Order Number: EK–SNDPL–OG. B01 Digital Equipment Corporation, Maynard, MA[...]

Third Printing, May 1994 Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance[...]

Contents Preface ..................................................... xv Part I Basic Operations 1 Introduction to Y our System Chapter Overview .......................................... 1–1 System Configurations ....................................... 1–2 Overview of the System . . . ................................... 1–3 Operating Syste[...]

3 Installing a Workstation System Chapter Overview . . ........................................ 3–1 Before Y ou Begin . . . ........................................ 3–2 T ask Overview ............................................. 3–3 Connecting the W orkstation . . . ................................ 3–5 Checking Y our Installation .........[...]

7 T urning Off Y our System Chapter Overview .......................................... 7–1 Before Y ou Begin ........................................... 7–2 Shutting Down the System ................................... 7–3 Halting the System ......................................... 7–5 8 Maintaining Y our System Chapter Overview ..........[...]

Changing the Default Fast SCSI (fast_scsi_a)(fast_scsi_b) ............ 10–1 1 1 1 Using the Password Security Feature Chapter Overview . . ........................................ 1 1–1 Before Y ou Begin . . . ........................................ 1 1–2 T ask Overview ............................................ 1 1–4 Moving the Secure S[...]

14 Running Diagnostic T ests Chapter Overview .......................................... 14–1 Before Y ou Begin ........................................... 14–2 T ask Overview . . ........................................... 14–3 Running Diagnostic T ests . . ................................... 14–4 Recording the Diagnostic Display Light Pat[...]

D Special Information for PTT Network Users Appendix Overview . ........................................ D–1 Service Categories . . ........................................ D–2 Host Power Rating . . ........................................ D–3 Module Isolation . . . ........................................ D–4 Safety Status ................[...]

3–12 Connecting a Printer to the System . ................... 3–18 3–13 Alternate Console Switch: Up ........................ 3–19 3–14 A Connected W orkstation . ........................... 3–20 4–1 Parts Used to Install Y our Server . . ................... 4–3 4–2 Connecting the Ethernet Loopback Connector . . .......... 4–5 4[...]

1 1–6 Replacing the Drive Cable and Driveplate Thumbscrews .... 1 1–1 1 1 1–7 Replacing the Cover ................................ 1 1–12 12–1 Attaching a Device to the Alternate Console/ Printer Port ...................................... 12–4 12–2 Changing the Alternate Console Switch . ................ 12–5 13–1 Power Indicator[...]

T ables 1 Parts Description .................................. xv 2–1 Requirements for System Location . . ................... 2–3 2–2 Hazards to A void .................................. 2–3 2–3 Positioning Y our System Components .................. 2–5 2–4 Front of the System Unit . ........................... 2–1 1 2–5 Back of [...]

9–6 Diagnostic T ests . . . ................................ 9–18 10–1 Environment V ariables .............................. 10–3 10–2 Parameters for Setting Startup Action . . ................ 10–5 10–3 Device Naming Conventions . ........................ 10–7 1 1–1 Console Command Access . . . ........................ 1 1–3 1 [...]

14–2 Diagnostic T ests ................................... 14–5 14–3 TURBOchannel T ests ............................... 14–8 14–4 Diagnostic Display Lights ........................... 14–12 14–5 T elephone Numbers of Digital Support Centers . .......... 14–15 A–1 System Unit Dimensions - Desktop . ................... A–2 A–2 [...]

[...]

Preface Purpose of This Guide This guide is intended for all users of the DEC 3000 Model 600/ 600S/700 AXP system. It describes how to install and operate the system. T o install options in the system, refer to the DEC 3000 Model 600/600S/700 AXP Options Guide and the documentation for the specific options. Structure of This Guide This guide consi[...]

T able 1 (Cont.) Parts Description Part Title Description II Advanced Operations Chapters in Part II describe advanced operations for your system, including use of console commands and the alternate console feature. These chapters are for users who understand or want to learn about advanced system operations. III T roubleshooting Chapters in Part I[...]

Convention Description variable Lowercase italics indicate a variable value that you must provide. For example: >>> set variable Return CAUTION Cautions provide information to prevent damage to equipment or software. Read these carefully . W ARNING W arnings contain information to prevent personal injury . Read these carefully . T ask Symb[...]

T ask Categories The tasks fall into three categories indicated by three symbols: Basic T ask This task does not require any specific experience to complete. Intermediate T ask Some specific experience is required to complete this task. Advanced T ask Specific experience is highly desirable to complete this task. xviii[...]

Part I Basic Operations Part I provides an overview of the DEC 3000 Model 600/600S/700 AXP system and its configurations. It also describes how to install the system and how to perform basic operations. This section includes the following chapters. Chapter Title 1 Introduction to Y our System 2 Preparing to Install Y our System 3 Installing a W or[...]

[...]

1 Introduction to Y our System Chapter Overview Introduction The DEC 3000 Model 600/600S/700 AXP systems are high- performance, desktop units that provide all the advantages of a 64-bit computing environment and the choice of different operating systems. These systems incorporate Digital’ s DECchip RISC microprocessors, which are part of the Digi[...]

System Configurations System Configurations T wo System Configurations The system is available in two configurations: • A workstation, Model 600 or 700 • A server system, Model 600S This guide describes the installation and set up of both configurations, along with information common to both configurations. Workstation Configuration Y ou[...]

Overview of the System Overview of the System Workstation Components The workstation system configuration consists of four components: a system unit, a monitor , a keyboard, and a mouse. Figure 1–1 shows a basic workstation configuration. Figure 1–1 The DEC 3000 Model 600/700 AXP Workstation MLO-010356 Server Components The server system con?[...]

Overview of the System System Highlights The DEC 3000 Model 600/600S/700 AXP system provides the following special features: This feature... Provides... Alpha RISC 64-bit architecture Significant performance advantages. Flexible memory architecture Expandable memory from 32 to 512 megabytes using 4-, 8-, 16- or 32-megabyte single inline memory mod[...]

Operating Systems Operating Systems Choice of Operating Systems Digital’ s Alpha AXP architecture allows you to choose from various operating systems. The operating system is the core software installed on your system that allows you to install and run applications. The following operating systems are supported for use on your workstation or serv[...]

Operating Systems DEC OSF/1 AXP Operating System The DEC OSF/1 AXP operating system is Digital Equipment Corporation’ s implementation of the Open Software Foundation (OSF) operating system components and Motif graphical user interface and programming environment. Description of DEC OSF/1 AXP DEC OSF/1 AXP is compliant with the OSF Application En[...]

Software Product Descriptions (SPD) Software Product Descriptions (SPD) SPD Description The Software Product Description (SPD) is the official defining document for software products licensed by Digital Equipment Corporation, including third-party products licensed by Digital. An SPD describes all important functional characteristics of the softw[...]

Graphics Capabilities Graphics Capabilities Graphics Options W orkstation graphics and multimedia options are available via the use of a TURBOchannel graphics module. All preconfigured DEC 3000 Model 600/700 AXP workstations are shipped with a TURBOchannel graphics module installed. TURBOchannel- based graphics provide a wide variety of Digital an[...]

Integrated Services Digital Network (ISDN) Integrated Services Digital Network (ISDN) Note: ISDN Not Y et A vailable Though your system can provide ISDN capabilities, they are not yet agency approved and available for your system. Currently , a plug has been placed in the ISDN port pending approval of ISDN licenses. Once agency approval of ISDN for[...]

Integrated Services Digital Network (ISDN) Use of ISDN D Channels The D channel uses a protocol standardized by the International T elegraph and T elephone Consultative Committee (CCITT) for setting up D Channel connections. The D channel can also be used for low-speed packet transmission. Audio Capabilities Audio Overview The system features telep[...]

Available Options A vailable Options Internal Options Y ou can install the following hardware options inside the system unit: Option Capabilities Provided T wo half-height RZ2x-series fixed disk drives Additional storage. One 5¼-inch or one 3½-inch removable media device (RMD) Additional data storage on any of the following devices: diskette dri[...]

Available Options TURBOchannel Options There are a total of three TURBOchannel option slots on your system. Preconfigured workstation systems use one or more slots for a graphics option, depending on the TURBOchannel option installed. Installing Internal Options For information about adding TURBOchannel and other internal options to your system, s[...]

2 Preparing to Install Y our System Chapter Overview Introduction Before you install your system, you need to prepare your site and familiarize yourself with your system hardware. In This Chapter This chapter covers the following topics: • Choosing a Location • Customizing Y our W ork Area • Unpacking a W orkstation System • Unpacking a Ser[...]

Choosing a Location Choosing a Location Space Requirements When choosing a location, consider the system measurements as shown in Figure 2–1. Make sure to leave enough room for air to circulate around the system unit. T able 2–1 describes the specific circulation requirements. Figure 2–1 Dimensions of System MLO-009191 53 cm (20 in) 44.5 cm [...]

Choosing a Location Location Requirements Choose a location for your system that meets the requirements listed in T able 2–1: T able 2–1 Requirements for System Location Requirement Explanation Dedicated power source with isolated ground Power source must be 1 10–120 V AC or 220–240 V AC. Specific power requirements and electrical specifi[...]

Customizing Y our Work Area Customizing Y our Work Area Ergonomic Considerations Considering the ergonomics of your working environment before installing your system can help you to work more effectively once you begin using your workstation. Comfort in your workplace can be achieved by making sure that your chair , monitor , keyboard, and mouse ar[...]

Customizing Y our Work Area T able 2–3 Positioning Y our System Components Adjust your chair so that... Y our feet are flat on the floor–use a footrest if needed. Y our legs form a right angle to the floor . The backs of your knees are free from the seat cushion. The body weight rests on the spine with support of the lower back region. Adjus[...]

Unpacking a Workstation System Unpacking a Workstation System Checking the Box Contents Y our workstation arrives in two boxes, one for the system unit and accessories, the other for the monitor . Before installing your system, check to see that you have all of the parts shown in Figure 2–3. The parts shown are for preconfigured systems. If you [...]

Unpacking a Workstation System Parts Used for Installation The accessory kit for your system includes many parts, some of which you do not need during system installation. See Figure 2–3 for the parts you need. Figure 2–3 Workstation Components and Parts Used for Installation System Unit Keyboard System Power Cord Monitor Power Cord Monitor Vid[...]

Unpacking a Workstation System Save These Parts for Later Y ou do not need the parts shown in Figure 2–4 during installation. However , please save them for future use. Figure 2–4 Components and Parts to Save 10BASE-T Loopback Connector Modem Loopback Connector Printer Port Terminator Antistatic Wrist Strap Screwdriver MLO-011247 Network Label [...]

Unpacking a Server System Unpacking a Server System Checking the Box Contents Before installing your server , check to see that you have all of the parts shown in Figure 2–5. Y ou can also check to see that you have all parts listed on the contents list that arrives with your system. If Parts Are Missing If you are missing any parts for your serv[...]

Unpacking a Server System W ARNING: T wo People Required The system unit is quite heavy . Digital recommends that two people remove it from the shipping box, as indicated on the packing carton. Save These Parts for Later Y ou do not need the parts shown in Figure 2–6 for installation. Please save them for future use. Figure 2–6 Components and P[...]

A Closer Look at Y our System A Closer Look at Y our System Front of the System Unit T ake a minute to familiarize yourself with the front of the system unit, shown in Figure 2–7. T able 2–4 describes the items shown. Figure 2–7 Front of System Unit 1 3 MLO-009194 2 T able 2–4 Front of the System Unit Feature Function Power indicator light [...]

A Closer Look at Y our System Back of the System Unit T ake a minute to familiarize yourself with the ports, switches, and indicators on the back of the system unit, shown in Figure 2–8. T able 2–5 explains the functions of these features. Figure 2–8 Back of System Unit ISDN S3 0 1 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 MLO-008606 2–12[...]

A Closer Look at Y our System T able 2–5 Back of the System Unit Feature Function , , and TURBOchannel slots 0, 1 and 2 In this diagram, TURBOchannel slot 0 contains a graphics option. Auxiliary power socket T o connect the monitor power cord so the monitor will not require a connection to a separate power outlet. System power socket T o connect [...]

A Closer Look at Y our System System Unit Symbols The rear of your system unit has symbols next to most of the connectors and ports. Following is an explanation of these symbols. Halt Button Press the halt button to put the system into console mode. Network Interface Port Insert the cable for a network connection. ISDN Interface Port ISDN currently[...]

Where to Go Next Where to Go Next Determine Y our Next T ask Use T able 2–6 to determine which chapter to read next. T able 2–6 Where to Go Next If you... Go to... Are installing a workstation Chapter 3 Are installing a server Chapter 4 Installed your system using the Setting Up Y our W orkstation card or the Setting Up Y our Server card and yo[...]

[...]

3 Installing a W orkstation System Chapter Overview Introduction If your system is configured as a workstation, see the installation instructions in this chapter . For a server system, see Chapter 4. Y our workstation is designed to be installed quickly and easily . The information in this chapter explains how to connect the cables to the system u[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Have Done Already Before you install your system components, you should have completed the following tasks: • Determined any ergonomic considerations you may have. • Chosen a location for your workstation. • Unpacked your workstation. • Familiarized yourself with the ports and controls [...]

T ask Overview T ask Overview Parts for Installation Figure 3–1 lists the parts used to install your workstation. Figure 3–1 Parts Used to Install your Workstation System Unit Keyboard System Power Cord Monitor Power Cord Monitor Video Cable Keyboard/Mouse Cable MLO-012922 Universal Strain Relief Strap Monitor Owner’s Guide, Options Guide, Ot[...]

T ask Overview Installation Steps T able 3–1 gives an overview of the steps involved in installing your workstation system components. T able 3–1 Steps to Install Y our DEC 3000 Model 600/700 AXP Workstation Step Connect the... T o the... 1 Universal strain relief strap Monitor video cable 2 Monitor video and power cables Rear of the monitor 3 [...]

Connecting the Workstation Connecting the Workstation Step 1: Universal Strain Relief Strap to Video Cable The universal strain relief strap (USRS) is included in the bag with your monitor video cable. Attaching the strap to the cable can prevent the connectors from pulling out of the monitor . Instructions for attaching the USRS are included with [...]

Connecting the Workstation T able 3–2 Making Monitor Connections Step See diagram with... Then... Three connectors (color monitor) Connect all three cable connectors to the monitor , matching the color cables, red (R), green (G), and blue (B), with the corresponding connectors marked R, G, and B on the monitor . Five connectors (color monitor) Do[...]

Connecting the Workstation T able 3–3 Connecting the Monitor Cables to the Monitor Connect the cable to a color monitor ... Like this... R G B R G B H/C V B G/S R B G R B G R MLO-010574 Connect the cable to a monochrome monitor ... Like this... G B R MLO-010661 Connect the monitor power cord... Like this... B G R MLO-009415 Installing a Workstati[...]

Connecting the Workstation Step 3: Monitor Video Cable to System Unit Connect the other end of the monitor video cable to the graphics connector on the system unit, as shown in Figure 3–2. The graphics connector extends from one of the three TURBOchannel slots on the rear of the system unit. Preconfigured systems use Slot 0. Tighten the thumbscr[...]

Connecting the Workstation Step 4: Monitor Power Cord to System Unit Connect the other end of the monitor power cord to the auxiliary power socket on the rear of the system unit, as shown in Figure 3–3. Figure 3–3 Plug End of the Monitor Power Cord MLO-008600 ISDN S3 2 1 0 Installing a Workstation System 3–9[...]

Connecting the Workstation Step 5: Ethernet Loopback Connector Connect the Ethernet loopback connector to the AUI Ethernet port on the system unit, as shown in Figure 3–4. If you plan to connect to an AUI Ethernet network or a ThinW ire Ethernet network, you may omit this step. After you have completed the steps in this chapter , see Chapter 5 fo[...]

Connecting the Workstation Step 6: SCSI T erminator Connect the terminator to the SCSI port on the system unit, as shown in Figure 3–5. Figure 3–5 Connecting the SCSI T erminator MLO-011262 ISDN S3 2 1 0 Installing a Workstation System 3–1 1[...]

Connecting the Workstation Step 7: Keyboard/Mouse Cable to System Unit Connect the keyboard/mouse extension cable to the keyboard/ mouse port on the system unit, as shown in Figure 3–6. T ighten the thumbscrews on both sides of the connector to ensure the cable is securely connected. Figure 3–6 Connecting the Keyboard/Mouse Cable MLO-008597 ISD[...]

Connecting the Workstation Step 8: Keyboard and Mouse Cables to Extension Cable Connect the keyboard cable and the mouse cable to the keyboard/ mouse extension cable , as shown in Figure 3–7. The extension cable is provided for the mouse and keyboard so that each can be located away from the system unit. Figure 3–7 Connecting the Keyboard and M[...]

Connecting the Workstation Step 9: Headset Connect the headset to the audio I/O port on the back of the system unit as shown in Figure 3–8. Y ou can use the headset as an alternative to a telephone handset to input and output audio. Figure 3–8 Connecting the Headset MLO-010980 ISDN S3 2 1 0 3–14 Installing a Workstation System[...]

Connecting the Workstation Step 10: System Power Cord Connect the system power cord to the system power socket on the rear of the system unit, as shown in Figure 3–9. Figure 3–9 Connecting the Power Cord to the System Unit MLO-008601 ISDN S3 2 1 0 Y ellow Label on Power Connector If there is a label similar to the one shown in Figure 3–10 cov[...]

Connecting the Workstation Figure 3–10 Factory-Installed Software Label Software is preinstalled on the hard disk. See installation guide before booting system. Logiciels preinstalles sur le disque dur. Consultez le guide d’utilisation avant de demarrer le systeme. Software ist bereits auf def Festplatte installiert. Vor dem Systemstart install[...]

Connecting the Workstation Figure 3–1 1 Connecting a Modem MLO-009388 ISDN S3 2 1 0 Step 13: Printer Consult the documentation that came with the printer to unpack it and set the baud rate. Most types of printers can be connected to the alternate console/printer port on the back of the system unit, as shown in Figure 3–12. Many printers, includ[...]

Connecting the Workstation Figure 3–12 Connecting a Printer to the System MLO-009198 ISDN S3 2 1 0 3–18 Installing a Workstation System[...]

Checking Y our Installation Checking Y our Installation Check Alternate Console Switch The alternate console switch should be in the up position as shown in Figure 3–13. Figure 3–13 Alternate Console Switch: Up MLO-012946 ISDN 2 1 0 S3 S3 An Installed Workstation Figure 3–14 shows all of the connections on an installed workstation. Check your[...]

Checking Y our Installation Figure 3–14 A Connected Workstation ISDN S3 0 1 2 MLO-011248 3–20 Installing a Workstation System[...]

Where to Go Next Where to Go Next Determine Y our Next T ask After installing your workstation, use T able 3–4 to determine which chapter to read next. T able 3–4 Where to Go Next If you want to... Go to... Connect your system to network hardware Chapter 5 Start your system Chapter 6 Installing a Workstation System 3–21[...]

[...]

4 Installing a Server System Chapter Overview Introduction If your system is configured as a server , see the installation instructions in this chapter . For a workstation system, see Chapter 3. Y our DEC 3000 Model 600S AXP server is designed to be installed quickly and easily . The information in this chapter explains how to install the server s[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Have Done Already Before you can proceed with this chapter to install your system components, you should have already completed the following tasks: • Chosen a location for your server . • Unpacked your system. • Familiarized yourself with the ports and controls on the rear of the system [...]

T ask Overview T ask Overview Parts for Installation The accessory kit shipped with your system includes parts that you do not need during installation. Figure 4–1 identifies the parts used to install your server . Save any terminators or additional parts in case you need them later . Figure 4–1 Parts Used to Install Y our Server System Unit M[...]

T ask Overview Installation Steps T able 4–1 gives an overview of the steps involved in installing your server system components. T able 4–1 Steps to Install Y our DEC 3000 Model 600S AXP Server Step Connect the... T o the... 1 Ethernet loopback connector AUI Ethernet port 2 SCSI terminator (optional) SCSI port 3 Alternate console (terminal) ca[...]

Connecting the Server Connecting the Server Step 1: Ethernet Loopback Connector Connect the Ethernet loopback connector to the AUI Ethernet port on the system unit, as shown in Figure 4–2. If you are planning to connect to an AUI Ethernet network or a ThinWire Ethernet network using a DECXM transceiver , you may omit this step. After you have com[...]

Connecting the Server Step 2: SCSI T erminator Connect the terminator to the SCSI port on the system unit, as shown in Figure 4–3. Figure 4–3 Connecting the SCSI T erminator MLO-011261 ISDN S3 2 1 0 4–6 Installing a Server System[...]

Connecting the Server Step 3: Alternate Console T o display console and other information on an alternate console device, connect a terminal to the alternate console/printer port on the back of the system unit as shown in Figure 4–4. Make sure the terminal baud rate is set to 9600 baud. See Chapter 12 for more information on using an alternate co[...]

Connecting the Server Check the Alternate Console Switch If you connected a terminal to use as an alternate console device (Step 2), you should check to make sure that the alternate console switch is in the correct position. See Chapter Overview for more information on using and setting this switch. Determine Switch Position The alternate console s[...]

Connecting the Server Y ellow Label on Power Connector If there is a label similar to the one shown in Figure 4–6 covering the power socket on the rear of the system unit, your system already has either the OpenVMS AXP or the DEC OSF/1 AXP operating system factory-installed on an internal fixed disk. Figure 4–6 Factory-Installed Software Label[...]

Connecting the Server Step 4: System Power Cord Connect the system power cord to the system power socket on the rear of the system unit, as shown in Figure 4–7. Figure 4–7 Connecting the Power Cord to the System Unit MLO-009197 ISDN S3 2 1 0 4–10 Installing a Server System[...]

Connecting the Server Step 5: Power Outlet Make sure that the power On/Off switch is in the off (O) position. Connect the other end of the power cord into a power outlet of the correct voltage. Step 6: Modem Consult the documentation that came with the modem to unpack it and clear the Force DSR attribute. (With this attribute cleared, your system w[...]

Connecting the Server Step 7: Printer Consult the documentation that came with the printer to unpack it and set the baud rate. Most types of printers can be connected to the alternate console/printer port on the back of the system unit, as shown in Figure 4–9. Many printers, including third-party plotters, can be used with your system. See your D[...]

Checking Y our Installation Checking Y our Installation An Installed Server Figure 4–10 shows all of the connections on an installed server . Check your system against this diagram to make sure you have installed everything correctly . Figure 4–10 A Connected Server ISDN S3 0 1 2 MLO-011250 Installing a Server System 4–13[...]

Where to Go Next Where to Go Next Determine Y our Next T ask After installing your server , use T able 4–2 to determine which chapter to read next. T able 4–2 Where to Go Next If you want to... Go to... Connect your system to a network Chapter 5 Start your system Chapter 6 4–14 Installing a Server System[...]

5 Connecting Y our System to a Network Chapter Overview Introduction At some point, you may want to connect your system to a network at your site. There are two parts to the task: making the hardware connections and establishing the network software connection. In This Chapter This chapter describes how to complete the hardware connections to a net[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Do First Before connecting your system to a network, you need to: 1. T urn off your system if it is already on. See Chapter 7. 2. Determine the network type at your site. 3. Understand the network connectors on your system. 4. Obtain the correct Ethernet cables or connectors to connect to the a[...]

Before Y ou Begin A vailable Networks Y ou can connect four different types of networking cables to your system: 1. AUI Ethernet 2. 10BASE2 (ThinW ire) Ethernet (by attaching a DECXM transceiver to the AUI Ethernet port) 3. 10BASE-T Ethernet 4. ISDN (Integrated Services Digital Network), when available. See Chapter 1 for a description of the ISDN s[...]

Connecting to an AUI Ethernet Network Connecting to an AUI Ethernet Network Procedure Overview T o connect your system to an AUI Ethernet network, sometimes referred to as thickwire or standard Ethernet, complete the steps in T able 5–2. T able 5–2 Steps for Connecting an AUI Ethernet Network Step Action 1 Remove the loopback connector . 2 Conn[...]

Connecting to an AUI Ethernet Network Figure 5–1 Connecting to an AUI Ethernet Network MLO-008603 ISDN S3 2 1 0 Step 3: Sliding Lock Push the sliding lock on the AUI Ethernet cable connector to the left, using a small screwdriver . The sliding lock prevents the cable from becoming disconnected. Connect the other end of the cable to the AUI Ethern[...]

Connecting to a 10BASE-T Ethernet Network Connecting to a 10BASE-T Ethernet Network Procedure Overview T o connect your system to a 10BASE-T Ethernet network, sometimes referred to as a twisted-pair network, complete the following tasks. 1. Connect the 10BASE-T cable to the 10BASE-T port on the back of the system unit as shown in Figure 5–2, maki[...]

Connecting to a 10BASE-T Ethernet Network Figure 5–2 Connecting a 10BASE-T Network Cable MLO-008604 ISDN S3 2 1 0 Connecting Y our System to a Network 5–7[...]

Connecting to a 10BASE2 (ThinWire) Ethernet Network Connecting to a 10BASE2 (ThinWire) Ethernet Network Connection Procedure Y ou can connect your system to a 10BASE2 Ethernet network by attaching an Ethernet cable to the AUI Ethernet port on the system unit, and then attaching a DECXM transceiver to the cable. T o connect your system to a 10BASE2 [...]

Connecting to a 10BASE2 (ThinWire) Ethernet Network Step 2: Ethernet Cable Connect an AUI Ethernet cable (BNE4C-xx) to the AUI port on the rear of the system unit, shown in Figure 5–1 of this chapter . Step 3: DECXM T ransceiver Connect the other end of the AUI Ethernet cable to the AUI port on the DECXM transceiver , as shown in Figure 5–3. Fi[...]

Connecting to a 10BASE2 (ThinWire) Ethernet Network Step 4: ThinWire Cables and T -Connector Connect the ThinW ire network cables to the T -Connector and then the T -connector to the DECXM transceiver as shown in Figure 5–4. Figure 5–4 Connecting the ThinWire Cables and T -Connector to the DECXM T ransceiver MLO-011209 Step 5: T erminate Connec[...]

Connecting to a 10BASE2 (ThinWire) Ethernet Network Figure 5–5 T erminating the Ethernet Connection MLO-011210 For information on correct settings for your DECXM, refer to T able 5–4 for documentation shipped with the units. T able 5–4 DECXM Documentation For this transceiver ... See this document... DECXM transceiver DECXM-AA T ransceiver In[...]

Setting and V erifying the Network Connection Setting and V erifying the Network Connection After Cable Connections After completing the hardware network connections to your system, you must complete the following tasks: 1. Set the network connection type. 2. V erify the network connection. T wo Network Settings There are two firmware network sett[...]

Setting and V erifying the Network Connection Setting the Network T ype Y ou set the network type from console mode. T o set the network type, complete the following steps: 1. Start your system as Chapter 6 describes. 2. If your system does not stop at the console prompt after the startup tests, press the halt button on the rear of your system unit[...]

Setting and V erifying the Network Connection If the T est Fails When the system is connected to a heavily loaded active network, failure may occur . If the test ni test fails, repeat the test several times. If the test continues to fail, connect the loopback connector as shown in Figure 4–2, and run the test again. If an error message appears, s[...]

6 Starting Up Y our System Chapter Overview Introduction Once you have installed your workstation or server and, optionally , connected to a network, you are ready to start the system. In This Chapter This chapter covers the following topics: • Before Y ou Begin • T urning On the System • Reviewing the Startup Display • Starting a System wi[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Have Done Already Before you start up your workstation or server system, you should have already completed the following tasks: • The installation tasks described in Chapter 3 or Chapter 4. • The network connection steps described in Chapter 5 if your system is to be networked. If you have [...]

T urning On the System T urning On the System T urning on Y our System in the Correct Order Whenever you turn your system on, always turn on the system unit last. For example, if your system has a monitor or an expansion box connected to it, turn on the units in this order: 1. Monitor 2. An expansion box 3. System unit By turning on your system com[...]

T urning On the System Workstation Startup Procedure T o start up the DEC 3000 Model 600/700 AXP system, perform the steps in T able 6–1. T able 6–1 Steps for Starting a Workstation Step Description 1 T urn the monitor power switch to the on position ( | ). 2 T urn on the power switch to any other devices, including any expansion box. 3 T urn t[...]

T urning On the System Figure 6–1 T urning On the System MLO-008602 ISDN S3 2 1 0 The power indicator light on the front of the system unit lights if the system has started up successfully . If the power light does not come on, see Chapter 13. Startup Display: Workstation When you turn on your workstation monitor and system unit, you will see col[...]

Reviewing the Startup Display Reviewing the Startup Display Startup Display As your system starts up, it performs a series of diagnostic tests. A display similar to the one in Figure 6–2 appears on the screen before the console prompt appears. The console prompt is three greater-than symbols (>>>). Figure 6–2 Startup Display DEC 3000 -[...]

Reviewing the Startup Display T able 6–3 describes the startup display in more detail. T able 6–3 Startup Display Information Item Description CPU Lists the CPU type, the firmware revision numbers and the type of processor . ASIC Status of the Application-specific Integrated Circuits (ASICs), on the system board and on the I/O board. MEM T ot[...]

Starting a System with Factory-Installed Software Starting a System with Factory-Installed Software Factory-Installed Software Procedure If your system has factory-installed software (a yellow sticker was covering the system power connector), the factory-installed software startup procedure will run the first time you start your system. Factory-In[...]

Starting a System with Factory-Installed Software OpenVMS AXP Initial Startup Screen If you have the OpenVMS AXP operating system factory- installed, you will see a display similar to the one shown in Figure 6–3 when you turn on your system. Figure 6–3 OpenVMS AXP Initial Startup Display +-------------------------------- -----------------------[...]

Starting a System with Factory-Installed Software Figure 6–4 OpenVMS AXP DECwindows Motif Start Session Screen ZK−3620A−GE Start Session Username Password Digital Equipment Corporation. 1988, 1991 All Rights Reserved. OK Clear C • If your system is a server and you have connected a terminal as an alternate console device, press the Return k[...]

Starting a System with Factory-Installed Software DEC OSF/1 AXP Initial Startup Screen If your system has the DEC OSF/1 AXP operating system factory-installed, you will see a display similar to the one shown in Figure 6–5 when you first turn on your workstation or server and after the system startup messages complete. Figure 6–5 DEC OSF/1 AXP [...]

Starting a System with Factory-Installed Software Log In to Y our System After the DEC OSF/1 AXP FIS procedure completes, you can log in to your system as follows: • If your system is configured as a workstation, the DECwindows Motif Start Session screen shown in Figure 6–6 will be displayed. Figure 6–6 DEC OSF/1 AXP DECwindows Motif Start S[...]

Loading Operating System Software Loading Operating System Software No Factory-Installed Software If your system was not preconfigured with an internal fixed disk drive, you do not have factory-installed software on your system. T o install the operating system, you must start your system and load your operating system software from a compact dis[...]

Where to Go Next Where to Go Next After Y our System Starts Once your workstation or server has started, use T able 6–6 to determine what to read next. T able 6–6 Where to Go Next If you want to... Go to... Start using your system Y our operating system or application software documentation for more information. Change the default startup proce[...]

7 T urning Off Y our System Chapter Overview Introduction This chapter describes the steps you should take to turn off your system. In This Chapter This chapter covers the following topics: • Before Y ou Begin • Shutting Down the System • Halting the System T urning Off Y our System 7–1[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Do First Before turning off your system, determine the current status of your workstation or server system, as T able 7–1 describes. T able 7–1 Current System Status If your system is... Then you should... Networked, or part of a cluster See your system manager before shutting down your sys[...]

Shutting Down the System Shutting Down the System T ask Overview: System Shutdown T able 7–2 gives an overview of the steps involved in shutting down your system. T able 7–2 Steps to Shutting Down Y our System Step Action 1 Shut down the operating system (if it is running). 2 T urn off the hardware. Step 1: Shut Down Operating System If your sy[...]

Shutting Down the System Step 2: T urn Off the Hardware After shutting down the operating system software, you can turn off the hardware by completing the following steps. Server systems may not have a monitor . 1. T urn off (O) the system unit by pressing the On/Off switch, Figure 7–1. 2. T urn off (O) all expansion boxes. 3. T urn off (O) all p[...]

Halting the System Halting the System i When to Halt the System While turning off the hardware usually requires that you first run the operating system shutdown procedures, it may be necessary to halt your system for other reasons. Halting the system returns control from program mode (operating system) to the console mode, and displays the console[...]

Halting the System Pressing the Halt Button T o halt the system, locate the halt button on the rear of the system unit, press it once and release it, as shown in Figure 7–2. Figure 7–2 Pressing the Halt Button MLO-008617 ISDN S3 2 1 0 7–6 T urning Off Y our System[...]

Halting the System System Halt Display When you press the halt button, you may see a system halt message similar to the one shown in Figure 7–3. Figure 7–3 System Halt Message >>> ?02 EXT HLT PC= 00000000.20000000 PSL= 00000000.00001F00 This message indicates that the halt button has been pressed. It does not signify an error . Note th[...]

Halting the System Returning to Program Mode T o return to the program mode of your operating system, enter the continue command as follows: >>>continue Return Y ou can return to program mode only if you were running the OpenVMS AXP operating system and you are using an alternate console. 7–8 T urning Off Y our System[...]

8 Maintaining Y our System Chapter Overview Introduction While your system is designed to function in a range of environmental conditions, it is an electrical device that should be treated with care and maintained properly . Correct use and maintenance of your system unit, monitor , keyboard, and mouse not only ensures that the system functions pro[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Do First Before performing any maintenance tasks, take these steps: 1. Complete the tasks outlined in Chapter 7 to turn off your system. 2. Prepare any cleaning materials you may need. Y ou can then complete your system maintenance tasks. Maintaining the System Unit and Keyboard Caring for the [...]

Maintaining the System Unit and Keyboard Liquid on the System Unit If you inadvertently spill liquid on the system unit and it goes inside, turn off the system as soon as possible and contact your Digital service representative as indicated in Chapter 13. Accidental Spills on the Keyboard While care should be taken not to spill food or liquid on th[...]

Cleaning the Monitor Cleaning the Monitor Cleaning Procedure T o clean the monitor screen, follow these steps: Step Action Result or Comment 1 T urn the monitor power switch to the off position (O). The monitor is powered off. 2 Using any reputable household glass cleaner , spray the cleaner onto a soft cloth and wipe the screen. Do not spray the c[...]

Cleaning the Mouse When to Clean the Rubber Ball If the arrow or pointer on your screen does not move freely as you direct it with the mouse, you may need to clean the rubber ball inside the mouse as T able 8–1 describes. T able 8–1 Steps for Cleaning the Mouse Step Description 1 T urn the mouse upside down and remove the cover plate as shown i[...]

[...]

Part II Advanced Operations Part II describes how to perform advanced operations with the DEC 3000 Model 600/600S/700 AXP system. This part includes the following chapters: Chapter Title 9 Using Console Commands 10 Changing Environment V ariables 1 1 Using the Password Security Feature 12 Using an Alternate Console[...]

[...]

9 Using Console Commands Chapter Overview Introduction This chapter explains how to use your system in console mode and describes some of the available console commands. In This Chapter This chapter covers the following topics: • Before Y ou Begin • Modes of System Operation • Console Mode User Interface • Console Commands • The boot Comm[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Do First Before using any console commands, you should complete these tasks: • Put your system in console mode. If your system is not displaying the >>> prompt, refer to Chapter 7 to shut down your operating system and/or halt your system. • Read this entire chapter before continui[...]

Modes of System Operation Modes of System Operation T wo Modes of Operation Y our system can run in either of two modes: 1. Console mode 2. Program mode Console Mode: Definition In console mode, the system operates under the control of the console subsystem, rather than the operating system. All user input is passed directly to the console. Consol[...]

Console Mode User Interface Console Mode User Interface Console Interface Components The console mode user interface is made up of the following elements: • Console prompt • Special keys and control characters • Console commands Console Prompt The console mode prompt looks like this: >>> Y ou can enter control characters and console [...]

Console Mode User Interface T able 9–1 Supported Keys and Control Characters Key or Control Character Function Return The Return key executes the command that you enter at the console prompt. < x The delete key deletes one character to the left of the current command line position. On video terminals, deleted characters will be erased from the[...]

Console Commands Console Commands Levels of Commands Console commands can be divided into two groups: • Basic • Advanced Basic Console Commands List All of the basic commands are described in this document. T able 9–2 lists the basic commands and indicates where you can find information about using them. Advanced Console Commands List It sho[...]

Console Commands T able 9–2 Basic Console Commands Command Function See boot Starts the operating system or other loadable software The boot Command continue Returns from console mode to operating system level (OpenVMS only) The continue Command halt Halts the system The halt Command help Displays help for console commands The help Command help a[...]

Console Commands T able 9–3 Advanced Console Commands Command Function See deposit W rites to specific memory , I/O, and register locations from the console The help advanced Command examine Displays contents of specific memory , I/O, and register locations from the console The help advanced Command initialize Initializes the console, a device,[...]

The boot Command The boot Command Description The boot command initializes the system and starts the boot program, which loads and starts the operating system software. Command Syntax Issue the boot command using the following syntax: >>> boot <-flags> <-filename> boot_device Return Command Description The boot command and its [...]

The boot Command For the... Refer to the... OpenVMS AXP operating system OpenVMS AXP Upgrade and Installation Manual DEC OSF/1 AXP operating system Guide to Installing DEC OSF/1 Overriding the Default Boot Flag V alue Y ou can override any current default settings by specifying a parameter with the boot command, for example: >>> boot -fi &[...]

The boot Command Example: OpenVMS AXP boot Command The following example indicates the command to boot the OpenVMS AXP operating system with the default flags from a fixed disk drive: >>> boot dka100 Return The device name elements in this boot command are defined as follows: • dk –the device type, in this instance an internal fixe[...]

The boot Command Example: TURBOchannel boot Commands The following command indicates how to: • boot from a TURBOchannel Ethernet option card in TURBOchannel slot 1, using the MOP protocol: >>> boot "1/esa0" Return • boot from a TURBOchannel SCSI option card in TURBOchannel slot 1, using the BOOTP protocol: >>> boot &[...]

The continue Command The continue Command Description The continue command returns the system to operating system level after console mode has been invoked. DEC OSF/1 AXP Operating System The continue command is not applicable for systems running the DEC OSF/1 AXP operating system. Y ou can halt the system and return to program mode using the conti[...]

The help Command The help Command Description The help command displays a brief list of console commands, parameters, and qualifiers. Y ou can specify one of the following topics with the help command, to display specific information: • help mips_emulator • help set • help show Command Syntax Issue the help command as follows: >>> [...]

The help Command Command Example The following command indicates how to obtain help on the show command: >>> help show Return The system responds with the following display: PRINTENV | SHOW { AUTO_ACTION | BOOTDEF_DEV | BOOT_OSFLAGS | BOOT_RESET | CONFIG | DEVICE | DIAG_LOE | DIAG_QUICK | DIAG_SECTION | ENABLE_AUDIT | ETHERNE T | ERROR | F[...]

The help advanced Command Command Example When you issue the help advanced command, your system displays a list of topics similar to the following: BOOT [- FL <bflg> ] [-FI <filnam> ] <devlist> CONTINUE DEPOSIT [{-B | -W | -L | -Q | -A }][{-PM | -VM }][-G][-U][-N:<n>] [{<addr> | <sym>| + | - | * | @ } [<datum&[...]

The show or printenv Command The show or printenv Command Description The show or printenv command provides information about the current setting for one or all environment variables. Entering the show or printenv without a parameter displays a list of all current environment variable settings. Command Syntax Issue the show or printenv command as f[...]

The test Command The test Command Command Description The test command lets you run diagnostic tests on the components listed in T able 9–6: T able 9–6 Diagnostic T ests T est Name Device T ested ASIC Application-specific integrated circuit MEM Memory NVR Non-volatile RAM and time-of-year (TOY) clock SCC Serial communications controller NI Net[...]

10 Changing Environment V ariables Chapter Overview Introduction Environment variables are firmware parameters that can be changed to suit your specific system needs. Y ou set environment variables while your system is in console mode. Y our system is shipped with default values set for all available environment variables. The environment variabl[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Do First Before changing any environment variables, you should complete these tasks: • Put your system in console mode. If your system is not displaying the >>> prompt, refer to Chapter 7 to shut down your operating system and/or halt your system. • Read Chapter 9 and the rest of t[...]

Available Environment V ariables T able 10–1 Environment V ariables V ariable Description Default auto_action Specifies the action the console should take any time the system is turned on. HAL T bootdef_dev Sets the default boot device. {null} boot_osflags Sets the boot flags. This environment variable is usually operating system-dependent. 0, [...]

Displaying Current Environment V ariables Displaying Current Environment V ariables Using the show Command Y ou can use the show command to display one or all of the environment variables in T able 10–1. Displaying Current Environment V ariable V alues T o display a list of the current values for all environment variables, enter the show command [...]

Changing the Default Startup Action (auto_action) Changing the Default Startup Action (auto_action) Description The auto_action environment variable determines the default startup action–the action the console takes any time the system is halted by software (not by pressing the halt button) or turned on. A vailable Settings for auto_action T able[...]

Changing the Default Startup Action (auto_action) Default Setting The default setting for the auto_action environment variable depends on whether your system has factory-installed software. W orkstations and servers with factory-installed software are set to BOOT , all other systems are set to HAL T . Command Syntax T o set the auto_action environm[...]

Changing the Default Boot Device (bootdef_dev) Changing the Default Boot Device (bootdef_dev) Description The bootdef_dev environment variable determines the default boot device, or devices, from which the system attempts to boot. The system boots from the default boot device each time it is turned on (if auto_action is set to boot or restart), or [...]

Changing the Default Boot Device (bootdef_dev) Command Syntax T o set the bootdef_dev environment variable, enter the following command: >>> set bootdef_dev device Return Enter the device from which you want your system to boot. If you do not know which devices your system contains, enter the show device command as the next section explain[...]

Changing the Default Boot Device (bootdef_dev) Command Example Using a Device List Y ou can set the bootdef_dev environment variable so that the systems tries to boot from a list of devices, rather than from a single device. T o set the bootdef_dev environment variable to a list of devices, enter a command similar to the following, substituting you[...]

Changing the Default Diagnostic Startup Mode (diag_quick) Command Syntax T o set the diag_quick environment variable, enter the following command. The system responds as shown. >>> set diag_quick on Return DIAG_QUICK = ON >>> Using the on parameter changes the default setting. Changing the Default Keyboard Language (language) Desc[...]

Changing the Default Keyboard Language (language) Command Example The system displays a list of languages, each with a designated number . T o set the language environment variable to Svenska, for example, you would enter 14 as shown in the example. >>> set language Return 0) Dansk 8) Francai s (Suisse Romande) 1) Deutsch 9) Italiano 2) De[...]

Changing the Default Fast SCSI (fast_scsi_a)(fast_scsi_b) A vailable Settings Y ou can set the fast_scsi_a and fast_scsi_b environment variables to on or off : • on to operate in slow and fast SCSI mode, device dependent. • off to operate in slow SCSI mode. Default Settings The environment variable default settings are: on for fast_scsi_a and o[...]

11 Using the Password Security Feature Chapter Overview Introduction The password security feature lets you prevent unauthorized personnel from accessing privileged console commands on your workstation or server . In This Chapter This chapter covers the following topics: • Before Y ou Begin • T ask Overview • Entering a Password • Enabling [...]

Before Y ou Begin Before Y ou Begin i When to Use the Security Feature If the password security feature is not enabled, whenever a user enters console mode, he or she can use all of the privileged console commands, such as halt, set, deposit , and initialize . Using the password security feature lets you restrict access to these key console mode fu[...]

Before Y ou Begin T able 1 1–1 Console Command Access Privileged Commands Non-privileged Commands boot (with parameters) boot (without parameters) deposit login (to allow password entry to the privileged state) examine continue (if you inadvertently push the halt button, this command lets you continue operations in a nonprivileged mode) halt ! (t[...]

Before Y ou Begin What Y ou Should Do First Before making your system secure, determine who will have access to privileged commands once you enable the security feature. Whoever requires privileged access to the system will need to know the password that you enter . If your operating system is running, use the shutdown procedures in your operating [...]

Moving the Secure System Jumper Moving the Secure System Jumper Secure System Jumper After entering a password and enabling the secure environment variable, you must move the secure system jumper on the I/O board to complete the security feature on your system. This section describes the steps required to move the jumper . T ask Overview T able 1 1[...]

Moving the Secure System Jumper Step 2: Remove System Unit Cover If you have a monitor or a terminal on top of the system unit, move it aside now . Figure 1 1–1 shows how to remove the cover from the system unit as follows: 1. Loosen the thumbscrew located in the center of the rear of the system unit . 2. Slide the cover forward and upward , unti[...]

Moving the Secure System Jumper Step 3: Release Driveplate After removing the system unit cover , locate and loosen the four thumbscrews that hold the driveplate in place . Remove the SCSI drive cable from the driveplate, as shown in Figure 1 1–2 to release the driveplate, by pushing out the plastic tabs on either side of the cable connector and [...]

Moving the Secure System Jumper Step 4: Move Driveplate Make sure that the system unit is placed on the table or desk with enough room at the front of the unit to accommodate the driveplate as you remove it. Grasp the rear of the driveplate and gently tilt the entire plate forward , as shown in Figure 1 1–3. Disconnect the driveplate power connec[...]

Moving the Secure System Jumper Step 5: Move Secure System Jumper Figure 1 1–4 indicates the position of the secure system jumper on the system I/O board. The secure system jumper is labeled on the I/O board, and the Off and On positions indicated. Figure 1 1–4 shows the jumper in the default Off position. T o make your system secure, remove th[...]

Moving the Secure System Jumper Step 6: Replace Driveplate Holding the driveplate vertically , align the metal extension tabs on the base of the driveplate with the corresponding slots along the front of the system unit. Reconnect the driveplate power connector , and replace the driveplate. Gently tilt the entire driveplate backward as shown in Fig[...]

Moving the Secure System Jumper Step 7: Replace Drive Cable and Thumbscrews Tighten the driveplate thumscrews , and reconnect the drive cable , as indicated in Figure 1 1–6. Note that the drive cable connector on the driveplate has two extensions that snap into position on either side of the drive cable when it is reconnected. Figure 1 1–6 Repl[...]

Moving the Secure System Jumper Step 8: Replace System Unit Cover Position the system unit cover at the front of the system unit and push it down and backward , as shown in Figure 1 1–7. T ighten the thumbscrew on the rear of the system unit once the cover is securely in place. Figure 1 1–7 Replacing the Cover MLO-010361 2 1 0 1 2 Step 9: T urn[...]

Entering a Password Entering a Password Enter a New Password Y our system arrives from the factory without a password. The password you enter must be a character string of exactly 16 hexadecimal characters (0 through 9, A through F). T o enter a password on your system, enter the commands shown in T able 1 1–4 starting at the console mode prompt.[...]

Enabling System Security Enabling System Security Enable Secure Environment V ariable Once you have entered and confirmed your password, you must enable security by setting the secure environment variable to on , using the set secure command as T able 1 1–5 describes. T able 1 1–5 Enabling the Secure Environment V ariable Step Description 1 Ch[...]

Using the login Command Using the login Command The login Command After entering the password, enabling it, and then changing the secure system jumper on the I/O board, you must use the login command to access privileged console commands as T able 1 1–6 describes. T able 1 1–6 Entering a Login Command Enter this command: System responds: >&g[...]

Forgetting the Password Forgetting the Password Erase the Current Password If you forget your password, you must complete the steps in T able 1 1–7 to erase the password and regain access to your system. T able 1 1–7 Steps to Access System Step Description 1 Move the secure system jumper to the Off position. Refer to the section Moving the Secu[...]

Disabling or Changing the Password Disabling or Changing the Password Disabling the Password T o disable the password security feature, enter the login command and your password. Then enter the following command at the console prompt: >>> set secure 0 Return SECURE = OFF Changing the Password T o change the password, complete the steps lis[...]

Disabling or Changing the Password If the passwords you enter are the same, your password is changed. If Y ou Make an Error If the two passwords you enter do not match, the console displays the following error message: ? 30 ILL PSWD T ry to reset the password by repeating the set password command again. 1 1–18 Using the Password Security Feature[...]

12 Using an Alternate Console Chapter Overview Introduction The alternate console feature of your system lets you direct console input and output from a monitor to another device, such as a terminal. In This Chapter This chapter covers the following topics: • Before Y ou Begin • Using the Alternate Console Feature Using an Alternate Console 12?[...]

Before Y ou Begin Before Y ou Begin i What Y ou Should Know Beforehand If you do not understand the alternate console feature, read the next section, Using the Alternate Console Feature, and then return to T able 12–1 to determine the status of your system and where to go next. T able 12–1 Current System Status If your system is... Refer to... [...]

Using the Alternate Console Feature Using the Alternate Console Feature When to Use an Alternate Console The alternate console feature lets you direct console output to an output device such as a terminal or a printer . Possible reasons for using an alternate console are these: • Y ou want to display screen output on a server system that does not[...]

Using the Alternate Console Feature Step 1: Connect a T erminal or Printer T o connect a terminal or printer as an alternate console device, connect the terminal or printer cable to the alternate console/ printer port on the system unit as shown in Figure 12–1. Figure 12–1 Attaching a Device to the Alternate Console/ Printer Port MLO-010370 ISD[...]

Using the Alternate Console Feature Step 2: Change the Alternate Console Switch The alternate console switch on the rear of the system unit directs console output to one of two destinations: a monitor or an alternate console device, such as a terminal or a printer . T o direct console output to an alternate console device, the alternate console swi[...]

Using the Alternate Console Feature Step 3: Redirect Console Output If you were using a monitor to display console output before you connected an alternate console device, you must restart your system to redirect console output. (Restarting the system is sometimes referred to as power cycling the system.) If you do not restart your system, the cons[...]

Part III Handling Problems Part III describes how to handle problems with the DEC 3000 Model 600/600S/700 AXP system. This section includes the following chapters: Chapter Title 13 Identifying a Problem 14 Running Diagnostic T ests[...]

[...]

13 Identifying a Problem Chapter Overview Introduction Though your system is a high-quality , thoroughly tested product, it is also an electrical device that may exhibit problems on occasion. If you are experiencing problems with your system, this chapter will help you identify and possibly fix the problem. In This Chapter This chapter covers the [...]

Before Y ou Begin Before Y ou Begin i T wo Ways to Solve System Problems There are two ways to solve problems with the system: 1. Use the chapters in Part III of this manual to help identify and possibly fix the problem yourself. 2. Contact your Digital service representative to diagnose and fix the problem for you. Methods to Identify Problems T[...]

T ask Overview T ask Overview Steps to Identifying a Problem T able 13–2 describes the steps required to identify and possibly fix system problems. T able 13–2 Steps to Resolving Problems Step Description 1 Determine type of problem. 2 Locate problem in troubleshooting tables. 3 Follow suggested actions to resolve problem. 4 If unable to resol[...]

Determining T ype of Problem Determining T ype of Problem T ypes of System Problems The following sections describe various problems and their possible causes, as well as some corrective actions that you can take. If you cannot isolate the problem, or if the corrective actions do not resolve the problem, see the section Reporting Problems to Digita[...]

Determining T ype of Problem T able 13–3 T ype of Problem This section... Describes these problems... Startup Problems Power indicator light off No startup display Error message in startup display Boot failure Interpreting the show Command Displays Error in show config Command The show device Command Error in show error Command The show memory Co[...]

Startup Problems Startup Problems Overview There are many different causes of system startup problems. Locate the problem you are having in the following sections. Power Indicator Light Off If the power indicator light does not come on when you turn on your system, see T able 13–4. The indicator light is shown in Figure 13–1. Figure 13–1 Powe[...]

Startup Problems Diagnostic Lights Display Error Code On the rear of the system unit, there are eight recessed amber-colored lights, as shown in Figure 13–2. Figure 13–2 Position of Diagnostic Display Lights MLO-008618 ISDN S3 2 1 0 1 0 2 3 4 5 6 7 During system startup, the diagnostic display lights flash in different patterns as the system s[...]

Startup Problems T able 13–5 Diagnostic Lights Display Error Diagnostic Display Lights 76543210 No Startup Display If there is no startup display after one minute when you turn on your system, see the possible causes in T able 13–6. T able 13–6 Missing Startup Display Possible Cause Corrective Action W all socket may not be operative. T ry a [...]

Startup Problems Error in Startup Display After the system startup messages, you may see an error message rather than the system power-up OK message. Figure 13–3 shows a startup display with an error message. Figure 13–3 Startup Display with Error DEC 3000 - M600 Digital Equipment Corporation System conducting power up tests. ------------------[...]

Startup Problems T able 13–7 Startup Error Codes If ?? appears next to this component... This item may be loose or missing... NI Ethernet loopback connector or cable SCC Keyboard/mouse cable to keyboard/ mouse port SCC Keyboard or mouse to keyboard/mouse extension cable If an error indicator appears next to one of the Devnam items listed above, c[...]

Startup Problems Boot Failure If your system does not boot the operating system after completing system startup tests, see T able 13–8. T able 13–8 Startup Without Booting Possible Cause Corrective Action The default startup action environment variable is set to halt at the console. Change default startup action as Chapter 10 describes. Softwar[...]

Interpreting the show Command Displays Interpreting the show Command Displays Overview Y our system includes many elements: components, memory modules, and optional devices. The show console commands test your system and display the status of these elements. T able 13–9 lists some of the show console commands and the information each provides: T [...]

Interpreting the show Command Displays show config Error Display Figure 13–4 shows a show config command display with an error . Figure 13–4 Configuration Display with Error >>>show config Return DEC 3000 - M600 Digital Equipment Corporation VPP PAL X4.41-82000101/OSF PAL X1.28-82000201 - Built on 19-MAY-1993 00:00:00.00 by XXXX TCIN[...]

Interpreting the show Command Displays Interpreting the show config Display If no errors are detected when you enter a show config command, you will see the message OK next to each device name. If an error is detected, a question mark (?) error indicator will be displayed in the DEVST A T column next to the corresponding device name. If you see an[...]

Interpreting the show Command Displays Elements in the show device Display The show device command displays eight columns of information described in T able 13–1 1. T able 13–1 1 The show device Display Described Display Heading Description BOOTDEV The boot device name. In this example, the boot device name of the RRD42 compact disc drive is DK[...]

Interpreting the show Command Displays Interpreting the show device Display The information presented in the show device display should correspond to the devices that are installed in your system. For instance, if you install a new drive in your system, that drive should be listed on the show device display after you complete the installation instr[...]

Interpreting the show Command Displays The show error Command The show error command displays specific information about any error that is occurring within your system. T able 13–12 lists the devices that the show error command provides information about: T able 13–12 System Device Errors T est Name Device T ested ASIC Application-specific in[...]

Interpreting the show Command Displays Elements in the show error Display If any errors are detected, the show error command displays an error message, described in T able 13–13. T able 13–13 Error Message Elements Error Message Element Description ? Error message indicator . 003 Field Replaceable Unit (FRU) number . The FRU is a Digital number[...]

Interpreting the show Command Displays The show memory Display The show memory command displays information about all of the memory in your system. This command lists a line of information about each memory bank. Note that the display will not indicate an error found in memory . Y ou can only display memory errors using the show error or the test m[...]

Display Problems Display Problems Overview If there appears to be some problem with your monitor display , try to locate the problem in this section. Cursor in Corner of Screen If your monitor displays diagnostic startup tests when you turn on your system, but then displays only the cursor in the lower left-hand corner of the screen (rather than di[...]

Display Problems Distorted Display on Monitor If your monitor is displaying information but appears distorted or unclear , see the possible causes in T able 13–14. T able 13–14 Monitor Display Problems Possible Cause Corrective Action If your monitor has a total of six connectors, marked V ideo In and V ideo Out, the monitor video cable may be [...]

Display Problems No Display on Monitor If your monitor does not display information after system startup, see T able 13–15. T able 13–15 Monitor Display Problems Possible Cause Corrective Action Monitor is not plugged in. Plug the monitor power cord into the auxiliary power socket on the rear of the system unit. See Figure 3–3. Monitor is not[...]

Mouse and Keyboard Problems Mouse and Keyboard Problems Pointer Missing from Screen If the mouse or optional tablet pointer does not appear on the screen, or if the monitor does not respond to your pointing device commands, see T able 13–16. T able 13–16 Mouse Problems Possible Cause Corrective Action Ctrl/F3 was pressed by mistake, and system [...]

SCSI Device Problems SCSI Device Problems Overview If you are having trouble with a SCSI device, such as an internal disk drive, or a tape drive in an expansion box, locate the problem in the next sections. For specific information about your SCSI device, refer to the documentation that was shipped with your system, or in the case of an option, wi[...]

SCSI Device Problems T able 13–19 Installed Software Problems Possible Cause Corrective Action Default boot device is set incorrectly . See Chapter 10 to set or change the default boot device. Default startup action may be set to halt. See Chapter 10 to change the default startup action. System startup command procedure was modified incorrectly [...]

Network Problems Network Problems Overview If you are having trouble with your network, locate the problem in this section. DEVNAM NI Error Message If an error message is displayed next to the identifer NI in the DEVNAM column of the system startup display or in the show device display , see T able 13–20. T able 13–20 Resolving NI Network Error[...]

Network Problems T able 13–21 Problems When Booting from the Network Possible Cause Corrective Action Local network problem. Problem is most likely caused by the customer server system or the network. Defective network interface. Refer to Chapter 14 for information on running diagnostic tests. After Solving a Network Problem T o test for a networ[...]

[...]

14 Running Diagnostic T ests Chapter Overview Introduction This chapter contains information about running diagnostic tests and contacting Digital Services. Diagnostic tests can help you identify the specific part or module that is causing errors in your system. In This Chapter This chapter covers the following topics: • Before Y ou Begin • T [...]

Before Y ou Begin Before Y ou Begin i Purpose of T ests If you cannot locate and/or resolve the system problem using the troubleshooting tables in Chapter 13, you can run diagnostic tests. Diagnostic tests can help to identify the source of a problem and provide specific information to present to your Digital service representative over the teleph[...]

T ask Overview T ask Overview Steps to Running Diagnostic T ests T able 14–1 summarizes the steps to perform when running diagnostic tests in order to identify or resolve a system problem. T able 14–1 Steps to Diagnostic T ests Step Procedure 1 Run the diagnostic test on the component, module or device that is causing an error . 2 Note the diag[...]

Running Diagnostic T ests Running Diagnostic T ests Diagnostic T ests If an error message is displayed next to a device name when you issue one of the show commands described in Chapter 13, you can test the device listed in the error message by using the test command. Using this command, you can run a number of diagnostic tests to help you determin[...]

Running Diagnostic T ests T able 14–2 Diagnostic T ests Device Name Device T ested Loopback Required ASIC Application-specific integrated circuit No MEM Memory No NVR Non-volatile RAM and time- of-year (TOY) clock No SCC Serial communications controller No NI Network interface (Ethernet) Y es 1 SCSI SCSI device(s) No ISDN 2 79C30A AMD chip No TC[...]

Running Diagnostic T ests Multiple T est Syntax Use the following syntax to run multiple tests: >>> test device_name1:device_name2 Return where device_name1 is the device you want to start with, and device_name2 is the last device you want to test. The diagnostic tests are run in the same order as the list of device tests in T able 14–2.[...]

Running Diagnostic T ests Example Diagnostic T est with Error If a diagnostic test fails, a display similar to the one shown in Figure 14–2 appears, containing information important to helping you determine the source of the problem. Figure 14–2 SCC T est Display with Error >>> test scc ? T-ERR-SCC-MOUSE - 0 char rcvd ?? 004 SCC 0x0060[...]

Running Diagnostic T ests TURBOchannel T est Commands T able 14–3 shows the TURBOchannel test commands. T able 14–3 TURBOchannel T ests Command Description test device_name cnfg Show configuration of option in TURBOchannel slot. test device_name init Initialize option in TURBOchannel slot. test device_name ls List the contents of the option RO[...]

Running Diagnostic T ests Initializing Y our System After you have run a test, you should use the following command to initialize your system to clear the error log from the system register . Figure 14–3 shows an example of the init command. Figure 14–3 Initializing Y our System >>> init Return INIT-S-CPU... INIT-S-RESET_TC... INIT-S-A[...]

Running Diagnostic T ests If the problem with your system has been fixed, after you initialize your system, you should be able to issue the show config command and not see any errors. If the problem is not fixed, contact Digital Services as described later in section Reporting Problems to Digital Services. Note: Another W ay to Initialize Y our S[...]

Recording the Diagnostic Display Light Pattern Recording the Diagnostic Display Light Pattern Diagnostic Display Lights Location On the rear of the system unit, there are eight recessed amber-colored lights, as shown in Figure 14–5. Figure 14–5 Position of Diagnostic Display Lights MLO-008618 ISDN S3 2 1 0 1 0 2 3 4 5 6 7 The diagnostic display[...]

Recording the Diagnostic Display Light Pattern Understanding the Diagnostic Lights During system startup, the diagnostic display lights flash on and off in different patterns as the system startup tests are performed. The light patterns are not random. They represent the hexadecimal number of a test action or result, in binary format–when a ligh[...]

Reporting Problems to Digital Services Reporting Problems to Digital Services How to Continue If you are able to locate the source of the system problem, run a test, and initialize the system, but are still having problems with your system, you should contact your Digital service representative. Digital Support Centers Digital service representativ[...]

Reporting Problems to Digital Services Figure 14–6 Serial and Model Numbers MLO-008605 1 2. Fill in the status checklist on the Handling Problems W orksheet at the end of this chapter . 3. Note the problem, possible causes if you know them, and solutions suggested in the previous sections. Also indicate what actions (if any) you have already take[...]

Reporting Problems to Digital Services T able 14–5 T elephone Numbers of Digital Support Centers Country T elephone Number United States 1-800-354-9000 Canada 1-800-267-5251 Canada (Quebec) 1-800-267-2603 United Kingdom [44]256 59200 France [33]929551 1 1 Germany [49]-(89)-95913218 Australia 009 252-277 Installing Loopback Connectors and T ermina[...]

Reporting Problems to Digital Services 10BASE-T Loopback Connector If your Digital service representative requests that you connect the 10BASE-T loopback connector , connect it as shown in Figure 14–7. Figure 14–7 Connecting the 10BASE-T Loopback Connector MLO-009408 ISDN S3 2 1 0 14–16 Running Diagnostic T ests[...]

Reporting Problems to Digital Services Alternate Console/Printer Loopback Connector If your Digital service representative requests that you connect the alternate console/printer loopback connector , connect it as shown in Figure 14–8. Figure 14–8 Connecting the Alternate Console/Printer Loopback Connector MLO-009410 ISDN S3 2 1 0 Running Diagn[...]

Reporting Problems to Digital Services Modem Loopback Connector If your Digital service representative requests that you connect the modem loopback connector , connect it as shown in Figure 14–9. Figure 14–9 Connecting the Modem Loopback Connector MLO-009412 ISDN S3 2 1 0 14–18 Running Diagnostic T ests[...]

Handling Problems Worksheet Handling Problems Worksheet T aking Notes Use the worksheet on the next page to record system information. After your have recorded all system information indicated on the worksheet, have the sheet available when you call your Digital service representative. Running Diagnostic T ests 14–19[...]

Handling Problems Worksheet DEC service representative telephone number: Model (circle one): 600 600S 700 Serial #: System Status (indicate which applies) : Item: System plugged into outlet Power indicator light lit Diagnostic display lights lit* Monitor power light lit Keyboard working Mouse working Console prompt appears Startup error message dis[...]

Part IV Appendixes Part IV provides technical and other information about your system. This section includes the following appendixes: Appendix Title A Hardware Specifications B Port Pin-outs C Associated Documents D Special Information for PTT Network Users[...]

[...]

A Hardware Specifications Appendix Overview Introduction This appendix lists the hardware specifications for your DEC 3000 Model 600/600S/700 AXP system. In This Appendix This appendix covers the following topics: • System Dimensions • Electrical Specifications • General Specifications • Environmental Limitations Hardware Specification[...]

System Specifications System Specifications System Dimensions T able A–1 provides the system unit dimensions. T able A–1 System Unit Dimensions - Desktop Weight Height Width Depth 20 kg 12.7 cm 51.0 cm 44.5 cm (45 lb) (5.0 in) (20.09 in) (17.50 in) Electrical Specifications T able A–2 provides electrical specifications for the system. T a[...]

System Specifications General Specifications T able A–3 provides various information about the system and its components and options. T able A–3 System Specifications Processor (Models 600/600S) DECchip 21064 Alpha AXP microprocessor , with 8 KB data cache, 8 KB instruction cache and floating point unit, running at 175 MHz. Processor (Model[...]

System Specifications Environmental Limitations T able A–4 provides information about the environmental conditions in which the system can operate. T able A–4 System Environmental Specifications Nonoperating Conditions, Packaged T emperature range –40°C to 66°C (–40°F to 151°F) Relative humidity 10% to 95% (noncondensing) Altitude 0 t[...]

System Specifications T able A–4 (Cont.) System Environmental Specifications Operating Conditions T emperature range 10°C to 35°C (50°F to 95°F) T emperature change rate 1 1°C per hour (20°F per hour) maximum Relative humidity 10% to 90% (noncondensing, no diskette) Maximum altitude 2000 m (6562 ft) Maximum wet bulb temperature 28°C (82?[...]

System Specifications International Power Cord Part Numbers T able A–5 shows the power cord part numbers for countries in which the system can operate. T able A–5 Power Cord Part Numbers Country Part Number Australia/N.Z BN15A-2E Austria BN13A-2E Belgium BN13A-2E Canada BN20A-2E Canada (French) BN13A-1K Denmark BN16A-2E Finland BN13A-2E France[...]

B Port Pin-outs Appendix Overview Introduction This appendix is for users who want to connect communications devices to their system. The tables in this appendix explain the functions of the pins on the system unit ports. In This Appendix This appendix covers the following topics: • Alternate Console/Printer Port • Synchronous/Asynchronous Comm[...]

Alternate Console/Printer Port Alternate Console/Printer Port Alternate Console/Printer Port Diagram Figure B–1 shows the pin layout for the alternate console/printer port. Figure B–1 Alternate Console/Printer Port 16 MLO-008613 Alternate Console/Printer Port Pin-outs T able B–1 describes pin usage for the alternate console/printer port. T ab[...]

Synchronous/Asynchronous Communications Port Synchronous/Asynchronous Communications Port Synchronous/ Asynchronous Communication Port Diagram Figure B–2 shows the pin layout for the synchronous/ asynchronous communications port. Figure B–2 Synchronous/Asynchronous Communications Port 11 3 14 25 MLO-008585 Synchronous/ Asynchronous Communicatio[...]

Synchronous/Asynchronous Communications Port T able B–2 (Cont.) Synchronous/Asynchronous Communications Port Pin-outs Pin Source Signal CCITT 1 EIA 2 Description 9 Not used 10 Not used 1 1 Not used 12 Not used 13 Not used 14 Not used 15 Not used 16 Not used 17 Not used 18 Not used 19 Not used 20 System DTR 108.2 CD Data terminal ready 21 Not used[...]

External SCSI Port External SCSI Port External SCSI Port Diagram Figure B–3 shows the pin layout for the external SCSI port. Figure B–3 External SCSI Port 1 25 50 26 MLO-008586 External SCSI Port Pin-outs T able B–3 describes pin usage for the external SCSI port. T able B–3 External SCSI Port Pin-outs Pin Description Pin Description 1 Chass[...]

External SCSI Port T able B–3 (Cont.) External SCSI Port Pin-outs Pin Description Pin Description 12 Not used 37 Not used 13 Not used 38 T erminal power 14 Not used 39 Not used 15 Chassis ground 40 Chassis ground 16 Chassis ground 41 SCSI bus A TN 17 Chassis ground 42 Chassis ground 18 Chassis ground 43 SCSI bus BSY 19 Chassis ground 44 SCSI bus [...]

Keyboard/Mouse or T ablet Port Keyboard/Mouse or T ablet Port Keyboard/Mouse or T ablet Port Diagram Figure B–4 shows the pin layout for the keyboard/mouse port. Figure B–4 Keyboard/Mouse or T ablet Port 18 91 5 MLO-008584 Keyboard/Mouse or T ablet Port Pin-outs T able B–4 describes pin usage for the keyboard/mouse port. T able B–4 Keyboard[...]

AUI Ethernet Port AUI Ethernet Port AUI Ethernet Port Diagram Figure B–5 shows the pin layout for the AUI Ethernet port. Figure B–5 AUI Ethernet Port 1 8 9 15 MLO-008583 AUI Ethernet Port Pin-outs T able B–5 describes pin usage for the AUI Ethernet port. B–8 Port Pin-outs[...]

AUI Ethernet Port T able B–5 AUI Ethernet Port Pin-outs Pin Source Signal Description 1 Chassis ground 2 XCVR ACOL+ Collision presence 3 System A TX+ T ransmit 4 GND Chassis ground 5 XCVR ARX+ Receive 6 XCVR GND Power return 7 CTL+ Not used 8 GND Chassis ground 9 XCVR ACOL- Collision, active low 10 System A TX- T ransmit, active low 1 1 GND Chass[...]

ISDN Port ISDN Port ISDN Port Diagram Figure B–6 shows the pin layout for the ISDN port. Figure B–6 ISDN Port 8 1 MLO-008611 ISDN Port Pin-outs T able B–6 describes pin usage for the ISDN port. T able B–6 ISDN Port Pin-outs Pin Description 1 Not used 2 Not used 3 T ransmit- 4 Receive+ 5 Receive- 6 T ransmit+ 7 Not used 8 Not used B–10 Por[...]

10BASE-T Port 10BASE-T Port 10BASE-T Port Diagram Figure B–7 shows the pin layout for the 10BASE-T port. Figure B–7 10BASE-T Port 1 8 MLO-008912 10BASE-T Port Pin-outs T able B–7 describes pin usage for the 10BASE-T port. T able B–7 10BASE-T Port Pin-outs Pin Description 1 T ransmit 2 T ransmit, active low 3 Receive 4 Not used 5 Not used 6 [...]

Audio Port Audio Port Audio Port Diagram Figure B–8 shows the pin layout for the audio port. Figure B–8 Audio Port 41 MLO-008612 Audio Port Pin-outs T able B–8 describes pin usage for the audio port. T able B–8 Audio Port Pin-outs Pin Description 1 Audio in 2 Audio out 3 Audio out return 4 Audio in return (ground) This adapter is pin-compat[...]

C Associated Documents Appendix Overview Introduction This appendix provides information about available documentation. For option and system hardware part numbers, consult your Digital sales representative. Not all of the following documents are available in every country . Check with your Digital sales representative for availability . In This Ap[...]

Associated Printed Documents Associated Printed Documents Related Printed Books T able C–1 lists the DEC 3000 Model 600/600S/700 AXP documents available in printed form. T able C–1 Associated Printed Documents TITLE ORDER NUMBER DEC 3000 Model 600/600S AXP W orkstation Kit: Owner ’ s Guide, Options Guide, Setting Up Y our System cards EK–SN[...]

OpenVMS AXP Documentation OpenVMS AXP Documentation A vailable Documentation T able C–2 lists documents associated with the OpenVMS AXP operating system. T able C–2 OpenVMS AXP Operating System Documents TITLE ORDER NUMBER OpenVMS AXP Upgrade and Installation Manual AA–PV6XA–TE OpenVMS System Manager ’ s Manual: Essentials AA–PV5MA–TK[...]

DEC OSF/1 AXP Documentation DEC OSF/1 AXP Documentation A vailable Documentation The following sections list the DEC OSF/1 AXP operating system documentation kits and their contents: • General User Documentation • Server Documentation General User Documentation T able C–3 lists available subkits of the DEC OSF/1 AXP operating system documenta[...]

DEC OSF/1 AXP Documentation T able C–3 (Cont.) User Documentation, QA–MT4AB–GZ TITLE ORDER NUMBER System and Network Management Documentation Subkit QA–MT4AE–GZ DEC V erifier and Exerciser T ool User ’ s Guide AA–PTTMA–TE Guide to Kernel Debugging AA–PS2T A–TE Network Administration and Problem Solving AA–PS2SA–TE Configur[...]

[...]

D Special Information for PTT Network Users Appendix Overview Introduction The United Kingdom and other countries require that certain installation information be provided about the communications 54-21813 module, which is hosted within the DEC 3000 Model 600/600S/700 AXP system. In This Appendix This appendix describes the appropriate installation[...]

Service Categories Service Categories Overview T able D–1 describes the services specifications for the 54-21813 module. T able D–1 BABT -Approved Service Specifications for the 54-21813 Module for UK Compliance Service Category Interface T ype (CCITT recom- mendation) Service Requirements Data Rate Public T elecommunications Operators 1 (Ele[...]

Host Power Rating Host Power Rating Correct Power Rating Y ou must ensure that the total power drawn by the 54-21813 module, the host, and other auxiliary equipment drawing power from the host, is within the rating of the host power supply . Digital has designed all permutations of the host configuration (including the DEC 3000 Model 600/600S/700 [...]

Module Isolation Module Isolation Clearance and Creepage Defined Clearance and creepage distances must be maintained on your 54-21813 module. Clearance is the shortest distance in air between two points. Creepage is the shortest distance along a continuous surface between those same two points. Creepage distances apply when the 54-21813 module sys[...]

Module Isolation T able D–3 Clearance and Creepage Distances Clearance (Xmm) Creepage (Ymm) 1 V oltage Used or Generated by Other Parts of the Host or Expansion Card (V rms or Vdc) 2.0 2.4 (3.8) Up to 50 2.6 3.0 (4.8) Up to 125 4.0 5.0 (8.0) Up to 250 4.0 6.4 (10.0) Up to 300 1 The distances shown in parentheses apply in an uncontrolled environme[...]

Cable Approval general approval NS/G/1235/100009 and/or conform to any other applicable requirements. Connector Diagram Figure D–1 shows the pin layout for the connector . Figure D–1 Connector Pin Layout 11 3 14 25 MLO-008585 Connector Pin-Outs T able D–4 describes pin usage for the connector . T able D–4 Connector Pin-Outs Described Pin De[...]

Supported Cables Supported Cables Cable Descriptions T able D–5 lists the cables supported by the 54-21813 module. T able D–5 Cables Supported by the 54-21813 Module Interface Cable T ype Name Molding Pins V .24 Extension BC22F-10 Straight 25-25 V .24 Extension BC22F-25 Straight 25-25 Equipment Between the Approved Module and a Digital Circuit [...]

[...]

Glossary 10BASE2 Ethernet network An IEEE standard 802.3-compliant Ethernet network connected with coaxial cable in a bus configuration. Also called ThinW ire Ethernet. Compare with 10BASE-T Ethernet network and AUI Ethernet network. 10BASE-T Ethernet network IEEE standard 802.3-compliant Ethernet products used for local distribution of data. Thes[...]

antistatic wrist strap A grounded strap you connect to your wrist and the system unit while handling internal devices that are sensitive to static. This strap prevents electrostatic discharge that could result in loss of data. applications Programs, such as a financial spreadsheet program, that perform end-user tasks. application-specific integra[...]

backup copy A copy of files or software made for safekeeping. Making a backup copy of the data stored on your disk allows you to recover that data after an accidental loss. Y ou can make backup copies on tape cartridges, or over a network using the Remote System Manager . baud rate The speed at which signals are serially transmitted over a communi[...]

boot server A system that provides boot services to remote devices such as network routers and V AXcluster satellite nodes. buffer An internal memory area used for temporary storage of data records during input or output operations. bus A group of signals consisting of transmission lines or wires to create a common channel or pathway . The bus inte[...]

caddy The holder for the compact disc used in a CDROM drive. CD See compact disc. CDROM See compact disc read-only memory . central processing unit (CPU) The unit of the computer that is responsible for interpreting and executing instructions. channel A path along which digital information can flow in a computer . Also, the main current path betwe[...]

cluster A group of networked computers that communicate over a common interface to share disk storage, application programs, and other computer resources. See also VMScluster system. CMOS See complementary metal-oxide semiconductor . coaxial cable A two-conductor wire in which one conductor completely wraps the other , with the two separated by ins[...]

component A basic part, or element, of your system that can be either internal or external. Compare with device. configuration See system configuration. connector Hardware that connects directly to a port on the system. console A device through which an operator communicates with the computer . console commands Commands that the user can input wh[...]

console subsystem The subsystem that provides the user interface to the system when operating system software is not running. The console subsystem consists of the following components: console program console terminal console terminal port remote access device remote access port Ethernet ports console terminal The video or hardcopy terminal used t[...]

data A formal representation of information suitable for communication, interpretation, and processing by humans or computers. database A collection of interrelated data on one or more mass storage devices. The collection is organized to facilitate efficient and accurate inquiry and update. data bus A pathway used to carry data signals between two[...]

DEC VET A Digital trademark used to describe the Digital DEC V erifier and Exerciser T ool. DEC VET is a multipurpose system maintenance tool that performs exerciser-oriented maintenance testing. It consists of a manager and exercisers that test system hardware and the operating system. The manager controls the exercisers. DECwindows Motif An inte[...]

diagnostics Programs, located in read-only memory , that detect and identify abnormal system hardware operation. digital data Information recorded and transmitted in binary coded form. direct memory access (DMA) A transfer of data directly from one memory to another without going through the main processor . disc See compact disc. disk A flat circ[...]

distributed processing A processing configuration in which each processor has its own autonomous operating environment. In a distributed processing environment, the processors are not tightly coupled and globally controlled as they are with multiprocessing. Instead, an application is distributed over more than one system. The application must ther[...]

environment variable A global data structure that can be accessed only from console mode. The setting of these data structures determines how a system starts up, boots operating system software, and operates. error correction code (ECC) Code that carries out an automatic error correction by performing a bit-wise exclusive-OR (XOR) operation on the [...]

Factory-Installed Software (FIS) Operating system software that is loaded into an internal fixed disk and installed in the system unit during manufacture. On site, the FIS is bootstrapped through the system disk, prompting a predefined menu of questions on the final configuration. fast SCSI An optional mode of SCSI-2 that allows transmission ra[...]

fixed disk A disk that resides permanently inside a disk drive. Compare with diskette. fixed disk drive The disk drive that holds and reads from or writes to a fixed disk. floating point A number that may be positive or negative but that has a whole (integer) portion and a fractional (decimal) portion; an arithmetic operation in which the decim[...]

half-height disk Any 1 5/8-inch (4.1-centimeter) high, fixed drive that is 3½ inches (9-centimeters) wide, such as those in the RZ family; or a 1 5/8-inch high removable drive that is 5-inches (12.7-centimeters) wide, such as a compact disc. halt The action of stopping the CPU from processing, which involves console mode and brings the system und[...]

input/output (I/O) device A piece of equipment that transmits data to (input) and from (output) the system. For example, a terminal or a mouse. Integrated Services Digital Network (ISDN) An international telecommunications standard that allows a communications channel to simultaneously carry voice, video, and data. interface An electronic circuit b[...]

light-emitting diode (LED) A semiconductor device that glows when supplied with a specific voltage. The operator control panel contains LEDs that indicate the status of the modules in the computer . local In close proximity or connected directly to the computer . Compare with remote. local area network A high-speed network communications system th[...]

log in T o identify yourself to the operating system. When you log in, you type an account name and password. If the name and password match an account on the system, you are allowed access to that account. login command The command issued at the operating system prompt that allows access to and communication with the system. loopback connector An [...]

megabit A unit of measure equal to a million bits. megabyte A unit of measure equal to 1,024 kilobytes or 1,048,576 bytes. memory The area of the system that electrically stores instructions and data, often temporarily . memory module See single inline memory module (SIMM). memory mother board (MMB) A module that plugs into the system card and that[...]

monitor A video device that displays data. MOP See Maintenance Operations Protocol. mouse A hand-held input device that is moved across the desktop to move the pointer or cursor on the monitor screen and to select menu options and draw graphics. The mouse is palm-sized and contains up to three buttons (function keys). multiplex T o transmit several[...]

node A device that has an address on, is connected to, and is able to communicate with other devices on the bus. In a computer network, an individual computer system connected to the network that can communicate with other systems on the network. node name A name that identifies a unique node. nonvolatile random-access memory (NVRAM) Memory , such[...]

open system A system that implements open specifications for interfaces, services, and supporting formats so that applications software can: • be ported across a wide range of systems with minimal changes • interoperate with other applications on local and remote systems • interact with users in a style that facilitates user portability Open[...]

parity A method for checking the accuracy of data by calculating the sum of the number of ones in a piece of binary data. Even parity requires the correct sum to be an even number , odd parity requires the correct sum to be an odd number . Compare with error correction code. password A unique string of characters, numbers, or both that identifies [...]

pointing device A terminal input device that allows you to make a selection from a menu or to draw graphics. See mouse and tablet. port A socket on the front or back of the system unit to which a terminal, printer , modem or other device is connected. port pin-outs The description of the function of electronic signals transmitted through each pin i[...]

program The sequence of instructions the system uses to perform a task. See also software. programmable array logic (P AL) A hardware device that can be programmed by a process that blows individual fuses to create a circuit. program mode The state in which the computer is controlled by the operating system. After the operating system is invoked, t[...]

reduced instruction set computer (RISC) A computer with an instruction set that is reduced in complexity , but not necessarily in the number of instructions. RISC architectures typically require more instructions than complex instruction set computer (CISC) architectures to perform given operations, because an individual RISC instruction performs l[...]

SCSI See Small Computer System Interface. SCSI bus A communications pathway between the Small Computer System Interface (SCSI) and other internal devices. The SCSI bus consists of an address bus, which selects the location of the data, and a data bus, which transfers the data. SCSI controller The device that directs the operations of the Small Comp[...]

serial port A port dedicated to hookups with serial line devices such as terminals or printers. Serial devices transmit data one word after another (serially) along a single pair of lines from a sending device to a receiving device. server Hardware or software that provides a specific set of services to a satellite or client. single inline memory [...]

SPECmark The geometric mean of the normalized results from the benchmarks defined by SPEC. See also Standard Performance Evaluation Corporation (SPEC). SROM Serial read-only memory . A device that loads a set of instructions into the CPU to bootstrap the system at power-up. standalone network A network that starts and operates alone, without being[...]

stylus A penlike device that draws on the surface of a tablet and functions as a pointing device. superpipelined Describes a pipelined machine that has a larger number of pipe stages and more complex scheduling and control. See also pipeline. superscalar Describes a machine that issues multiple independent instructions per clock cycle. synchronous [...]

tablet An absolute-positioning input device composed of a flat-surfaced digitizing tablet that functions as a drawing surface. T wo pointing devices, a puck and a stylus, are used with the tablet to move the cursor on the monitor screen, draw graphics, and make selections from the menu. See also mouse. tape cartridge Housing for magnetic tape. The[...]

three-dimensional graphics Images that are displayed on the screen in 3D. These graphics require the use of a 3D graphics option, such as the PXG+, and Open-3D software or Software PEX (software PEX server). Software PEX allows a 3D application to run without specialized 3D hardware. timesharing A system in which two or more programs are allotted, [...]

universal strain relief strap A plastic strap used when connecting the monitor video cable to the back of the monitor . The strap prevents the weight of the cable junction box from pulling the cables out of the BNC connectors. user interface The style of interaction between the computer and the user of that computer . video refresh rate The speed a[...]

workstation A single-user system that offers high-performance, high-resolution graphics, and can function in a network environment. wrist strap See antistatic wrist strap. write-enabled The condition that enables a tape or diskette to be written to. Compare with write-protected. write-protected The condition that prevents a tape or diskette from be[...]

[...]

Index < x , 9–5 A Alternate console, 12–3 Alternate console switch checking, 4–8 icon, 2–14 location, 2–13, 4–8 moving, 13–20 wrong position, 13–20 Alternate console/printer port icon, 2–14 location, 2–13 pinouts, B–2 specifications, 12–2 Associated documentation, C–1 Audio capabilities, 1–4, 1–10 Audio port locati[...]

Connecting (cont’d) monitor power cord to workstation, 3–9 monitor video cable, 3–8 monitor video cable to monitor, 3–5 power cord to server, 4–10 power cord to workstation, 3–15 SCSI terminator, 3–1 1, 4–6 server , task list, 4–4 to a network, 3–10, 4–5 universal strain relief strap, 3–5 Console commands advanced, list of, [...]

Digital Services support centers, 14–13 Documentation console commands, 9–2 DEC OSF/1 AXP general user, C–4 DEC OSF/1 AXP migration, C–5 DEC OSF/1 AXP server, C–5 DEC OSF/1 AXP startup, C–4 DEC OSF/1 AXP system and network management, C–4 organization of, xv printed, C–2 E Environment variables auto_action , 10–5 bootdef_dev , 10?[...]

Installation (cont’d) workstation connecting time, 3–2 workstation, task list, 3–4 ISDN, 1–9 Australia, 1–9 availability, 1–9 port, 1–4 port icon, 2–14 port location, 2–13 port pinouts, B–10 K Keyboard accidental spills, 8–3 problems, 13–23 Keyboard/mouse port icon, 2–14 location, 2–13 pinouts, B–7 L Language default, [...]

P Part number location, 2–1 1 Password security feature, 1 1–14 Port locations, 2–13 Port pin-outs table of, B–1 Power cycling, 12–6 Power indicator light location, 2–1 1 Power On/Off switch location, 2–13 Power socket See System power socket printenv command, 7–7 See show command Printer connecting to the system, 3–17, 4–12 Pri[...]

show device command, 10–8, 13–14 show error command, 13–17 show memory command, 13–19 show, printenv command, 9–17 show, printenv secure , 1 1–14 Shutdown, system steps to, 7–3 SIMM See single inline memory module Single inline memory module, 1–4 Software DEC Open3D, 1–8 DECsound, 1–10 DECwindows Motif, 1–10 Software Product D[...]

T roubleshooting (cont’d) SCSI device problems, 13–24 startup problems, 13–6 TURBOchannel, 1–4 options, 1–12 slots, location, 2–13 TURBOchannel test command, 14–7 T wisted-pair network, 1–4 U UL TRIX, 1–6 United Kingdom requirements See PTT Network Users Universal strain relief strap, 3–5 Unpacking checking contents, 2–6 two p[...]

[...]

How to Order Additional Documentation T echnical Support If you need help deciding which documentation best meets your needs, call 800-DIGIT AL (800-344-4825) and press 2 for technical assistance. Electronic Orders If you wish to place an order through your account at the Electronic Store, dial 800-234-1998, using a modem set to 2400- or 9600-baud.[...]

[...]

Reader ’ s Comments DEC 3000 Model 600/600S/700 AXP Owner ’ s Guide EK–SNDPL–OG. B01 Y our comments and suggestions help us improve the quality of our publications. Thank you for your assistance. I rate this manual’ s: Excellent Good Fair Poor Accuracy (product works as manual says) Completeness (enough information) Clarity (easy to under[...]

Do Not T ear – Fold Here and T ape TM BUSINESS REPL Y MAIL FIRST CLASS PERMIT NO. 33 MA YNARD MASS. POST AGE WILL BE P AID BY ADDRESSEE No Postage Necessary If Mailed in the United States DIGIT AL EQUIPMENT CORPORA TION Information Design and Consulting MRO1–3/K10 JS 200 FOREST STREET MARLBORO, MA 01752-301 1 Do Not T ear – Fold Here[...]