HP C4077-90960 Bedienungsanleitung

Copyright© 1997 Hewlett-P ackard Co. Printed in USA 7/97 Manual P art No. C4077-90960 HP LaserJet 5Si Family Printers Service Manual English HP LaserJet 5Si Family Printers Service Manual Printed on at least 50% T otal Recycled Fiber with at least 10% Post-Consumer Paper *C4077-90960* *C4077-90960* C4077-90960[...]

Service Manual HP LaserJet 5Si (C3166A) HP LaserJet 5Si MX (C3167A) HP LaserJet 5Si NX (C3950A) HP LaserJet 5Si HM (C3124A) HP LaserJet 5Si Mopier (C4076A/C4077A/C4176A)[...]

© Copyright Hewlett-Packard Company 1997 All Rights Reserved. Reproduction, adapt ation, or translatio n without prio r written permis sion is prohibited, exce pt as allowed under t he copyright laws. Publication number c4077-90960 First edit ion, Septembe r 1997 Warranty The informatio n contained in this docume nt is subje ct to change without n[...]

Conventions This manual uses the following conventions: The names of major printer parts and assemblies are Capitaliz ed. Color is used to emphasize items which are important to the material under discussion. Bold is used for emphasis, particularly in situations where italic type would be confusing. Italic type is used to indicate related documents[...]

Chapter Descriptions 1 Product Information Contains printer features and product overview, tray capacities and sizes, media specifications, service approach, and how to get technical assistance. 2 Site Requirements Contains space and environmental r equirements. 3 Operating Overview Contains details about control panel menus, restoring factory defa[...]

B IO Information Contains basic cabling and configuration information for connecting the printer to supported networks. C Regulatory Information Contains required safety and compliance statements. Subject Index Contains an alphabetical, cross referenced listing of information found in the main body of the manual. iii[...]

List of Figures Figure 1-1 Sample Model and Serial Number Labels . . . . . . . . . . 1-7 Figure 1-2 HP LaserJet 5Si/5Si MX/NX and Mopier Engine - Front and Right Side View with Tray 1 Open . . . . . . . . . . . 1-14 Figure 1-3 HP LaserJet 5Si Mopier - Front and Right Side View with Tray 1 Open . . . . . . . . . . . . . . . . . . . . . . 1-15 Figure[...]

Figure 6-3 AC Access Cover . . . . . . . . . . . . . . . . . . . . . . . 6-18 Figure 6-4 Back Cover . . . . . . . . . . . . . . . . . . . . . . . . . . 6-19 Figure 6-5 Front Cover (1 of 2) . . . . . . . . . . . . . . . . . . . . . . 6-21 Figure 6-6 Front Cover (2 of 2) . . . . . . . . . . . . . . . . . . . . . . 6-21 Figure 6-7 Left Lower Cover . .[...]

Figure 6-51 Transfer Roller Assembly . . . . . . . . . . . . . . . . . . 6-64 Figure 6-52 Tray 1 Assembly . . . . . . . . . . . . . . . . . . . . . . . 6-65 Figure 6-53 Tray 4, Back Cover . . . . . . . . . . . . . . . . . . . . . . 6-67 Figure 6-54 Tray 4, Left Cover . . . . . . . . . . . . . . . . . . . . . . 6-68 Figure 6-55 Tray 4, Right Cover .[...]

Figure 6-99 Mailbox with Stapler, Stapler Removal . . . . . . . . . . 6-109 Figure 7-1 HP LaserJet 5Si / 5Si MX / 5S i Mopier Troubleshooting Process . . . . . . . . . . . . . . . . . . . 7-4 Figure 7-2 HP LaserJet 5Si / 5Si MX / 5S i Mopier Troubleshooting Process . . . . . . . . . . . . . . . . . . . 7-5 Figure 7-3 Fan Location and Airflow . . . [...]

Figure 8-3 Printer Internal Components (1 of 4) . . . . . . . . . . . . 8-12 Figure 8-4 Printer Internal Components (2 of 4) . . . . . . . . . . . . 8-14 Figure 8-5 Printer Internal Components (3 of 4) . . . . . . . . . . . . 8-16 Figure 8-6 Printer Internal Components (4 of 4) . . . . . . . . . . . . 8-18 Figure 8-7 2000-Sheet Input Unit Internal [...]

List of T ables Table 1-1 Printer Features . . . . . . . . . . . . . . . . . . . . . . . 1-3 Table 1-2 Tray 1 Media Guidelines . . . . . . . . . . . . . . . . . . . 1-4 Table 1-3 Tray 2 Media Guidelines . . . . . . . . . . . . . . . . . . . 1-5 Table 1-4 Tray 3 Media Guidelines . . . . . . . . . . . . . . . . . . . 1-6 Table 1-5 Tray 4 Media Guidel[...]

Table 7-3 Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11 Table 7-4 Image Quality . . . . . . . . . . . . . . . . . . . . . . . . 7-15 Table 7-5 Printer Control Panel Messages . . . . . . . . . . . . . . . 7-24 Table 7-6 Blank (White) page . . . . . . . . . . . . . . . . . . . . . . 7-64 Table 7-7 Black Page . . . . . . . . . .[...]

1 Product Information Chapter Contents Printer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Paper Capacities and Sizes . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Tray 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Tray 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Recycling Toner Cartridges . . . . . . . . . . . . . . . . . . . . . . . . 1-23 Related Documentation and Training Media . . . . . . . . . . . . . . . 1-24 Technical Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25 HP AUDIO-TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25 HP FIRST . . . . . . . . . . . . . [...]

Printer Features Features LaserJet 5Si (C3166A) LaserJet 5Si MX (C3167A) LaserJet 5Si Mopier (C4076A/C4077A/ C4176A) Print Speed Duplex Speed 24 ppm letter or A4 13 ppm ledger (1 1x17) or A3 15 ppm legal or B4 9.5 ppm letter or A4 6.5 ppm ledger or A3 7.5 ppm legal or B4 24 ppm letter or A4 13 ppm ledger (1 1x17) or A3 15 ppm legal or B4 9.5 ppm le[...]

Paper Capacities and Sizes T ray 1 Media Type (Feed Orientation) Dimensions Weight Capacity Maximum paper size 1 1.7 x 17.7 in (297 x 450 mm) Single-sided: 16-lb bond to 53-lb bond (1 10-lb index); 60 to 199 g/m 2 ) T wo-si ded: 16 to 28-lb bond (60 to 105 g/m 2 ) 100 sheets of 20-lb bond paper (Do not load to more than a maximum height of 10 mm—[...]

T ray 2 Note The HP LaserJet 5Si HM (C3124A) supports 16-53 lb bond media from all trays. However, performance in Tray 2 may not be as good with heavier media due to the sharp turn in the paper path. For best performance, Tray 1, 3, or optional Tray 4 are recommended. Caution When using 16 lb bond media, only use fusing mode=STD PAPER. Media Type ([...]

T ray 3 T ray 4 (2000 Sheet Input Unit) Media Type (Feed Orientation) Dimensions Weight Capacity Paper , Letter (Landscape) 8.5 x 1 1 in (216 x 279 mm) Single-sided: 16 to 28-lb (60 to 105 g/m 2 ) T wo-si ded: 16 to 28-lb bond (60 to 105 g/m 2 ) 500 sheets of 20-lb bond paper (letter and A4 for T rays 2,3, and 4) Paper , ISO A4 (Landscape) 8.3 x 1 [...]

Identification Model and Serial Numbers The model number and serial numbers are listed on identification labels located on the rear of the printer. The model number is alphanumer ic, such as C3166A for the HP LaserJet 5Si printer. The serial number contains information about the Country of Or igin, the Revision Level, the Production Code, and produ[...]

Specifications This section contains information on physical and electrical character istics of the printer. For information on the printer site and environmental requirements (such as oper ating temperature and humidity, ventilation, etc.) see Chapter 2. Description Dimension Height 21.3 in. (541 mm) Height of 2000 Sheet Input Unit (T ray 4) 18.9 [...]

Volts Freq Amps* Watts (typical) Printer 120 V ac ± 10% 100 V ac ± 10% 50/60 Hz ± 2 Hz 50/60 Hz ± 2 Hz 13.5 @ 120v printing = 500 standby = 135 PowerSave Mode LaserJet 5Si =21 LaserJet 5Si MX=24 220 V ac ± 10% 240V ac ± 10% 50 Hz ± 2 Hz 50 Hz ± 2 Hz 6.0 @ 220v printing = 500 standby = 135 PowerSave Mode LaserJet 5Si =21 LaserJet 5Si MX=24 2[...]

Operation position (per ISO 9296) Printer (stand alone) Printer System* Printing L PA dB(A) 54 db 56 db Standby L PA dB(A) 42 db 42 db Bystander 1m (per ISO 9296) Printing L PA dB(A) 50 db 55 db Standby L PA dB(A) 38 db 42 db Sound Power (per ISO 9296) Printing L W AD 6.6 bels (A) 7.1 bels (A) Standby L W AD 5.5 bels (A) 5.5 bels (A) * Printer Syst[...]

Media Selection Guidelines Note More detailed specifications ar e in the HP LaserJet 5Si and 5Si MX User’s Guide, and the HP LaserJet Printer Family Paper Specification Guide. (See “Related Documentation and Training Media” later in this chapter.) Paper To achieve the best possible print quality and avoid paper jams, follow these guidelines f[...]

Adhesive Labels Use the following guidelines when selecting labels: Caution Tray 1 is required for printing adhesive labels. Print labels to the Face-Up Bin only. This printer does not support use of labels with any exposed spaces. Do not attempt to print on label sheets after any of the labels have been removed from the sheet. Damage to the printe[...]

Storing Print Media Follow these guidelines when stacking and storing print media: • Store paper in its ream wrapper until ready to use. • Re-wrap partially used packages of media before storing. • Stack each carton upright and squarely on top of the other. • Store envelopes in a protective box to avoid damaging the envelope edges. • Keep[...]

Product Overview External V iew of HP LaserJet 5Si/5Si MX/NX and Mopier Engine HP LaserJet 5Si/5Si MX/NX and Mopier Engine - Front and Right Side View with Tray 1 Open 1 Face-Up Bin 2 Control Panel 3 Face-Down Bin 4 Adjustable Paper Stop 5 Toner Cartridge Access Door 6 Tray 1 7 Tray 1 Extensions 8 Tray 1 Paper Width Guides 9 Input Slot for 2000-She[...]

External V iew of HP LaserJet 5Si Mopier HP LaserJet 5Si Mopier - Front and Right Side View with Tray 1 Open 1 Left Output Bin 2 Control Panel 3 Top Output Bin 4 Adjustable paper stop 5 Top cover 6 Envelope Feeder (optional) 7 Tray 1 (multi-purpose) 8 Tray 1 extensions 9 Tray 1 paper width guides 10 Front door 11 Tray 2 12 HP 2000-Sheet Input Tray [...]

Formatter Assemblies Rear and Left Side View 1 Formatter Printed Circuit Assembly 2 Hard Disk Accessory Loc ation (optional for LJ 5Si/5Si MX/5Si NX and standard for LJ 5Si Mopier and Mopier Engine) 3 MIO Card 1 Location 4 Parallel IEEE 1284 Interface Port 5 MIO Card 2 Location 6 External Paper Handling Controller Board Location 7 SIMM Slots 8 AC P[...]

Accessories and Options The accessor ies and optional equipment for the LaserJet 5Si, 5S i MX, and 5Si NX printers are shown in Figure 1-5 and described in Table 1-9. For the LaserJet 5Si Mopier (C4076A), all the accessories in Figur e 1-4 and in Table 1-9 are standard features, except for the Envelope Feeder and the Multi-Bin Mailbox (replaced wit[...]

Accessory/Option Part/Product Number Description T oner Cartridge C3909A Replacement toner cartridge. Stapler Cartridges C3772A 3-pack of staple cartridges. Each cartridge contains 2000 staples and should last about two months, depending on use. Memory upgrades 2 MByte—C3131A 4 MByte—C3132A 8 MByte—C3133A 16 MByte—C3146A Upgrade to a total [...]

Hard Disk The Printer Hard Disk accessory is optional for the HP Las erJet 5Si, 5Si MX, and 5Si NX printers. The hard disk is a standard feature of the HP LaserJet 5Si Mopier and Mopier engine. It can be used to permanently store downloaded fonts and forms in the printer. Unlike the standard printer memory, permanently downloaded items remain in th[...]

If you are a Po stScript langua ge programmer, refer to Adobe’s PostScript Language Reference Manual for information about downloading forms and patterns to the disk. (For the Macintosh environment, refer to the on line help in the HP LaserJet Utility Guide included with the HP LaserJet Utility software.) For the Windows environment, refer to you[...]

Service Approach Repair of the printer normally begins with a three-step proc ess: • Step 1: Isolate the problem to the major system, i.e. the host computer, the network and/or server, or the printer system. • Step 2: Determine if the problem is located in the access ories or in the printer engine. • Step 3: Troubleshoot the problem using the[...]

Consumables The printer has two consumables, the toner cartridge and staple cartridges, which may be ordered directly from Hewlett-Packard. Refer to Chapter 8 for ordering information. T oner Cartridge Life The Toner Cartridge (C3909A) is designed to simplify replacement of the major “consumable” parts. The toner cartridge contains the printing[...]

Refilled T oner Cartridges & Non-HP Staple Cartridges While Hewlett-Packard does not prohibit the use of refilled toner cartridges and non-HP staple cartridges during the warranty period or while under a maintenance contract, their us e is not supported for the following reasons: • Repairs resulting from the use of refilled toner cartridges a[...]

Related Documentation and T raining Media Table 1-11 lists where to order related documentation. See “Order ing Parts” earlier in this chapter for the phone numbers of each organization. Description Part Number SMO SME HPD HP LaserJet 5Si Family Service Manual Bundle C4077-99015 HP LaserJet 5Si Family User Bundle C3166-99018 X HP LaserJet 5Si M[...]

T echnical Assistance HP ASAP (Automated Support Access Program) pr ovides free technical support information 24 hours a day, 7 days a week. The ASAP system includes HP AUDIO-TIPS and HP FIRST, both explained below. The ASAP service requir es a touchtone phone. HP AUDIO-TIPS HP AUDIO-TIPS is an interactive voice response system providing prerecorde[...]

HP CompuServe Forum CompuServe members can download a variety of support materials including product data sheets, software application notes, and pr inter drivers for many popular software applications. Members may also post and reply to questions in an interactive format. To access the HP Forum, type GO HP at any prompt. For more information, or t[...]

W arranty This warranty entitles you to standard warranty ser vices for your printer and accessories and is available fr om HP worldwide. However, there may be local variations in the level of warranty service. You should c ontact the local HP Service Center to check for the applicable local warr anty in your country or provinc e. One-Year On-Site [...]

Note The use of non-Hewlett-Packard toner cartridges alone does not affect either your warranty or any maintenance contr act you may have purchased. However, if an HP LaserJet printer failure or damage is found to be attributable directly to the use of a non-HP toner cartridge, HP will not repair the printer free-of-charge. In this cas e, standard [...]

2 Site Requirements Chapter Contents Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Space Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . 2-4 Site Requirements 2-1[...]

2-2 Site Requirements[...]

Operating Environment The electrical specifications listed in Chapter 1 must be maintained to ensure proper operation of this pr inter. Consider the following points before installing the printer. • Install in a well-ventilated, dust-free area. • Install on a hard, flat and continuous surface, with all four pr inter feet level. Do not install o[...]

Space Requirements Printer Space Requirements 1 Top view 2 Side view Environmental Requirements Keep the printer within the following environmental c onditions for optimum performance. Figure 2-1 Item Operating Storage Temperature 10° to 32.5° C (50° to 90.5° F) 0° to 40° C (32° to 105° F) Humidity 20 to 80% RH (with no condensation) 15 to [...]

3 Operating Overview Chapter Contents Using the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Control Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Settings and Defaults . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Prin[...]

3-2 Operating Overview[...]

Using the Control Panel Control Panel Layout The control panel consists of a 2-line, 20-character per line display panel, five keys, and three indicator lights. Control Panel Layout Figure 3-1 Key Function [On Line] Switches the state of communication bet ween computer and printer to ON (on line) or OFF (of f line). Stops printing when memory clear[...]

Indicator Lights The control panel indicator lights are described in the following table. The column labeled “Do this:” includes an action only when an action is required. When this indicator: Looks like this: It means this: Do this: On Line On Flashing Of f Ready to receive data. Going of f line. Printer is of f line. No action required. Press[...]

Settings and Defaults The printer makes most printing decisions based on either temporar y settings or factory (permanent) defaults. Note Settings you send from software applications over ride printer defaults. Temporary Settings are the values set for the cur rent print job by your software application. Temporary settings remain in effect until th[...]

Restoring Factory Defaults Caution If possible, print a PCL Configuration Page prior to performing a Cold Reset. This will document current settings for later referenc e. Performing a Cold Reset resets the JetDirect configuration. To avoid making changes to your configuration, remove the JetDirect card before performing a co ld reset 1 Press and ho[...]

Menu Item Default Setting DISPLA Y LANGUAGE= ENGLISH P APER DESTINA TION= T OP OUTPUT BIN P APER SIZE= LETTER or A4 P APER TYPE= PLAIN ENVELOPE FEEDER SIZE= COM10 ORIENT A TION= PORTRAIT PERSONALITY= AUT O RESOLUTION ENHANCEMENT= ON PRINT DENSITY= 3 ECONOMODE= OFF 2-SIDED= OFF BINDING= LONG EDGE PRINT POSTSCRIPT ERRORS= OFF JAM RECOVER Y= OFF P AGE[...]

Heavy Media Fuser Mode Explanation The LaserJet 5Si HM (Heavy Media) provides users the capability to enhance toner adhesion for heavier media. The fuser mode choices can be made at the printer’s control panel or with PJL commands. Press MENU until you see PRINT QUALITY MENU . Press ITEM until you see Fuser=STD PAPER . Make your choice by pressin[...]

STD PAPER HEAVY PAPER1 HEAVY PAPER2 CARD STOCK1 CARD STOCK2 CARD STOCK3 T ypi cal copy/bond paper , labels, envel opes, and transparenc ies. Supports 20-28 lb Bond media. Heavier copy/bond paper , labels. Supports 28-36 lb Bond media. Heavier copy/bond paper , labels. Supports 36-42 lb Bond media. Cardstock, heavy paper . Minimum media we ig ht sup[...]

Control Panel Menus Press [Menus] to cycle through the contr ol panel menus. Each menu is described in a separate t able in this section. Table 3-5 provides a ma p of all the menus and their associated items. Menu items are displayed only if their associated option is installed, or function is activated. All menus and their associated items are acc[...]

Note Shaded items appear only if the associated option or function is activated. TRAY MENU JOB CONTROL MENU TEST MENU CONFIGURATION MENU PRINT QUALITY MENU See Table 3-6 See Table 3-7 See Table 3-8 See Table 3-9 See Table 3-10 ENVELOPE FEEDER T YPE CANCEL JOB PCL CONFIGURA TION P AGE SER VICE MESSAGE ECONOMODE ENVELOPE FEEDER SIZ E PRESS SELECT T O[...]

T ray Menu Asterisk ( * ) i ndicates printer default. Shaded menu items appear only i f associated option or func tion is acti vated. Tray Menu Items Item Choices Action Required ENV FEEDER TYPE= PLAIN* PREPRINTED LETTERHEAD TRNSPRNCY PREPUNCHED LABELS BOND RECYCLED COLOR CARDSTOCK Press [Item] to display al ternate menu items. Press [+] to display[...]

Job Control Menu The items available in the Job Control Menu can also be changed through software applications if an appropriate pr inter driver is installed. Job Control Menu Items Item Choices Action Required CANCEL JOB None Press [Item] to display alternate menu items. Press [Select] to cancel Job. Printer display s: STOPPING CHECK LAST PAGE Whe[...]

T est Menu Test Menu items can be selected only from the printer contr ol panel. You cannot change or override them from your softwar e application. See “Testing the Printer” later in this chapter for detailed information about running printer tests and interpreting their r esults. Shaded menu items appear only i f associated option or func tio[...]

Configuration Menu This menu contains the items for Personality, Resourc e Saving and Memory setup. Depending on how the printer is configured, any combination of menu items and possible values can appear. Memory configuration items can be selected only from the printer control panel. Caution When changing memory configuration or I/O Buffering (I/O[...]

Asterisk ( * ) i ndicates printer default. Shaded menu items appear only i f associated option or func tion is acti vated. Configuration Menu Items Item Choices Action Required SERVICE MESSAGE= ON OFF * Displayed only after approx 350,000 (250,000 for HP LaserJet 5Si Heavy Media printers) images and only when PERFORM USER MAINTENANCE message is dis[...]

Print Quality Menu Asterisk ( * ) i ndicates printer default. ** Only with HP LaserJet 5Si Heav y Media printers PostScript Menu Asterisk ( * ) i ndicates printer default. Shaded menu items appear only i f associated option or func tion is acti vated. Print Quality Menu Items Item Choices Action Required ECONOMODE= OFF * ON Press [+] to display c h[...]

PCL Menu PCL Menu Items Item Choices Action Requir ed SOURCE= INTERNAL * Press [+] to display c hoice. Press [Select] to activate c hoice. NUMBER= 0..52 (0 *) Press [+] to display c hoice. Press [Select] to activate c hoice. PTICH= 0.44..99.99 (10.00 *) Press [+] to display c hoice. Press [Select] to activate c hoice. SYM SET= ROMAN-8 MS PUBL ISO L[...]

I/O Menu Caution When changing memory configuration (Configuration Menu) or I/O Buffering, the printer will automatically reset. All fonts, macr os, and downloaded data (except what is stored on the optional Disk Acc essory) will be lost. Asterisk ( * ) i ndicates printer default. Shaded menu items appear only i f associated option or func tion is [...]

MIO 1 and 2 Menus Note Items displayed depend upon the MIO card that is installed in the printer. MIO 1 and 2 Menu Items Item Choices Action Required Items display ed depend upon the MIO card that is installed in the pri nter . The actions requi red depend upon the items displ ayed on the Menu. Shaded menu items appear only i f associated option or[...]

Service Mode The Service Mode should be used only by author ized service per sonnel. While in Service Mode, you can: • Verify and set the Page Count and serial number. These are displayed on the PCL Configuration Page. • Set the Cold Reset Paper Size Default. (This sets the factory default paper size to either Letter or A4.) • Clear the ERR L[...]

Service Mode Menu Items Item Choices Actions Required PAGECOUNT= nnnnnnn Displays total number of pages printed by the pri nter . Press [+] to step through values above cursor . Press [Select] to activate choi ce. Cursor will move to nex t digit. Printer will set new number i nto NVRAM after least signi ficant digit is selected. Pressing [Menus ] o[...]

Setting Page Count, Maintenance Count, and Serial Number The page count, maintenance count, and printer ser ial numbers are stored in Non-Volatile Memory. PAGECOUNT is the total number of images printed by the printer, MAINTCOUNT is the pagecount when the next preventive maintenance should be performed (every 350,000 images), and S.N. is the printe[...]

Setting the Cold Reset Default Paper Size When replacing a Formatter PCA with a default paper size setting of A4, set COLD RESET PAPER= to A4. 1 Enter the Service Mode as previously described in this chapter. 2 Press [Menus] to access the Service Menu. 3 Press [Items to step through the menu until COLD RESET PAPER=LETTER* is displayed. 4 Press [+] [...]

T esting the Printer PCL Configuration Page When you print a PCL Configuration Page, the printer checks its internal controller and I/O interface, then pr ints two pages, one showing the overall printer configuration (see Figure 3-2), and one showing the curr ent menu settings (see Figure 3-3). You can review these pr intouts to verify proper insta[...]

Configuration Page Figure 3-2 PCL Configuration Page 3-26 Operating Overview[...]

1 Printer Information lists printer s pecific statistics. Serial Number shows the printer serial number . Formatter Number shows the number of the formatter board. Firmware Datecode is an eight-digit date (YYYYMMDD) of the internal code. Processor Revision is the revision number of the firmware processor . Page Count shows the number of pages the p[...]

Figure 3-3 PCL Menu Map Page 3-28 Operating Overview[...]

1 T ray Menu lists the current media types settings, and for T ray 1 or the Envelope Feeder , the media size. 2 Job Control Menu shows the Cancel Job and Form Feed times. 3 T est Menu lists the dif ferent available pri nter tests. 4 PCL Menu lists the PCL font settings used. 5 Configuration Menu lists the current settings for the configuration item[...]

Cold Reset Cold reset clears all data from the printer memor y and sets all the defaults (except Service Mode settings) back to the factor y settings. Caution Performing a cold reset resets the JetDirect configuration. To avoid making changes to your configuration remove the JetDirect card before performing a cold reset. If possible print a PCL and[...]

4 Maintenance and Adjustments Chapter Contents Cleaning the Printer and Accessories . . . . . . . . . . . . . . . . . . . 4-3 Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Cleaning Spilled Toner . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Preventative Maintenance . . . . . . . . . . . . . . . . . . . . . . .[...]

4-2 Maintenance and Adjustments[...]

Cleaning the Printer and Accessories To maintain the print quality and paper performanc e, thoroughly clean the printer and the paper handling accessor ies: • Every time you change the toner cartridge. • After printing approximately 15,000 images. • Whenever print quality problems occur. Clean the outside surfaces with a lightly water -dampen[...]

Cleaning the Printer 1 Before you begin these steps , turn the printer OFF and unplug all cords. 2 Open the top cover of the printer and remove the toner cartridge. WARNING! Avoid touching the adjacent fusing area. It may be HOT. Caution Do not touch the transfer roller (A). Skin oils on the roller can reduce print quality. If toner gets on your cl[...]

Cleaning Spilled T oner Defective toner cartridges can develop leaks. Also, after a paper jam has occurred, there may be some toner remaining on the r ollers and guides inside the printer. The pages that print immediately after the jam may pick up this toner. Clean spilled toner with a cloth slightly dampened in cold water. Do not touch the Transfe[...]

Preventative Maintenance The user-conducted preventive maintenance cycle for this printer is every 350,000 images. The part numbers for the preventive maintenance kits are C3971A for the 100V printers, and C3972A for the 220V printers. The kits contain the following replacement parts: one Fusing Assembly, one Transfer Roller Assembly, and six Feed/[...]

T ray 2 and 3 Adjustment Procedure The paper trays are mechanically aligned to the printer chassis at the factory. Perform this procedur e ONLY if a paper tray has been replaced with a tray other than the original factory installed unit, or if the top margin of the image area is off-center more than 0.5 mm (0.02 in.) The adjustment procedur e is id[...]

Note Refer to Figure 4-2. Each adjustment notch changes the physical position of the tray by 0.5 mm (0.02 in). Moving the lever counter-clockwis e moves the tray inward and increases distanc e A. Moving the lever clockwise moves the tray outward and decreas es distance A. Tray 2/3 Position Adjustment 4 If distance A is greater than distance B by mo[...]

T ray 4 Adjustment Procedure In some cases, the registration from Tray 4 (HCI) causes pr int to start too close to the edge of the paper. This situation is not a typical occurrenc e. In most cases the Tray 4 offset is fine. Although this may or may not be within specification, it is unacceptable to some users. Perform the following adjustment proce[...]

10 Tighten both screws. 11 Reassemble the vertical transfer unit. 12 Make sure all the cables (vertical transfer unit and paper deck drive assembly) are reconnected. 13 Reinstall left, right, and rear covers to the HCI. Note The locating pin position at the middle could still be unacceptable for some customer’s applications. If so, repeat the pro[...]

5 Functional Overview Chapter Contents Basic Printer Functionality . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Printer Functional Block Diagram . . . . . . . . . . . . . . . . . . 5-4 Power Distribution System . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 AC Power Distribution . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 [...]

Printer Input Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38 Paper Size Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38 Printing from Trays 2 and 3 . . . . . . . . . . . . . . . . . . . . . . . . 5-38 Printing from Tray 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-39 Printing from the Envelop[...]

Basic Printer Functionality This chapter presents a functional overview of the pr inter and the printing processes. The following topics, functions, and systems are discussed: • Basic Printer Functionality • Power Distribution System • Formatter System • DC Controller System • Image Formation System • Paper Paths and Components 5 Functi[...]

Printer Functional Block Diagram Figure 5-1 is a functional block diagram of the printer showing the basic paths for signal, control, and media. F unctionalBlockDiagram { { { MediaPath Signal/ControlPath DCControllerSystem Control Panel L VPS Fan 2 Fan 3 FormatterSystem Memory SIMMS Disk Accessory Personality SIMMS External Pap[...]

Power Distribution System The AC and DC power supply circuits are contained in the Low Voltage Power Supply (LVPS). The high voltages required for image formation ar e generated by the High Voltage Power Supply (HVPS). The Low Voltage Power Supply and Distribution System is illustrated in Figure 5-2. Refer to the Reference Diagrams at the end of Ch[...]

AC Power Distribution The AC power circuitry supplies AC voltage whenever the power cord is connected, and the power switch is ON. A toner cartridge must be installed and the top access door must be closed before AC voltage is supplied to the DC power circuits or the Fusing Assembly. Overcurrent/Overvoltage Protection There are two overcurr ent/ove[...]

High V oltage Power Distribution The High Voltage Power Supply (HVPS, see Figure 5-4) applies a DC biased AC voltage to the primary charging roller and the developing roller, and a programmed DC voltage (depending upon the phase of the printing proc ess) to the Transfer Roller. Refer to the General Timing Diagram (Figur e 5-22) at the end of this c[...]

Formatter System The Formatter PCA is responsible for the following: • Controlling the PowerSave mode. • Receiving and processing pr int data from the various printer inter faces. • Monitoring Control Panel inputs and relaying printer status information (through the Control Panel and the Bi-Directional I/O). • Developing and coordinating da[...]

Note Printer error messages over ride the PowerSave message. The printer will enter PowerSave mode at the appropriate time, but the error message will continue to be displayed. Resolution Enhancement (REt) The Formatter PCA contains circuitry for Resolution Enhancem ent technology (REt), which modifies the standard video dot data on its way to the [...]

DC Controller System The following systems and functions are controlled by the DC Controller PCA: • DC Power Distribution (+5V DC, +12V DC, +24V DC) • Laser and Scanner Drive • Paper Motion Monitoring and Control (photosens ors and flags) • Clutches (registration, tray pickup, and Tray 1 feed) • Engine Test • Motors (Main Drive, Scanner[...]

Engine T est Microswitch The Engine Test Microswitch, located on the DC Controller PCA, is activated manually through the square access hole at the right rear of the printer (see Figure 6-4). This switch causes the pr int engine to perform an internal self test diagnostic which bypasses the Formatter PCA and then prints a full page of black paralle[...]

Image Formation System Laser printing requires the interaction of several different technologies (such as electronics, optics, and electrophotographics) to provide a printed page. Each process functions independently and must be coordinated with the other printer processes. The image formation process consists of six steps: 1 Drum Cleaning 2 Drum C[...]

T oner Cartridge The toner cartridge is the “heart” of the Image Formation System. It houses the cleaning, conditioning, and developing steps of the process. The toner cartridge contains the photosensitive drum, pr imary charging roller, developing station, toner cavity, and cleaning station. Including the components that wear, degrade, or are [...]

Drum Cleaning The cleaning blade inside the toner cartridge is in contact with the surface of the drum at all times. As the drum rotates during printing, excess toner is removed from the drum surface and stor ed in the waste toner receptacle inside the toner cartridge. Drum Cleaning Figure 5-8 5-14 Functional Overview[...]

Drum Conditioning After the drum is physically cleaned, it is conditioned by applying a uniform negative charge across the surface of the drum with the pr imary charging roller, located in the toner cartridge. The primary char ging roller is coated with conductive rubber, charged with an AC curr ent which erases any residual charges, and produc es [...]

Image W riting During the writing process, a modulated laser diode projects a beam onto a rotating six-sided scanning mirror. As the scanning mir ror rotates, the beam is directed through a set of focusing lens es to a direction changing mirror which reflects it through a slot on the top of the toner cartr idge, and onto the photosensitive drum. Th[...]

Image Developing The developing process changes the latent electrostatic image into a visible image by depositing negatively charged toner particles on the exposed ar eas of the drum. The developing station is located inside the toner cartridge and consists of a metallic cylinder that rotates around a fixed magnetic core. The developing cylinder is[...]

Image T ransferring and Media Separation During the image transferring process, the toner image on the drum surface is transferred to the media. A positive char ge applied to the back of the media by the transfer roller, causes the negatively char ged toner particles on the drum surface to be attracted to the media. The small diameter of the drum, [...]

Image Fusing The Fusing Assembly bonds the toner particles into the media with a heated fusing roller and a soft pressure roller. Ther e are two levers on the Fusing Assembly which adjust roller pressure for single sheets (down position), or envelopes (up position). Both levers must be set to the same position. The fusing roller contains two quartz[...]

Paper Paths and Components Printer, Duplex Unit, and Envelope Feeder The components of the printer paper path are illustrated in Figur e 5-14. Figure 5-15 and Table 5-1 illustrate and describe all of the printer sensors, solenoids, clutches, motors, and fans. Figure 5-14 Printer Paper Paths 5-20 Functional Overview[...]

Control Device Title Location CL1 Registration Clutch PIU (right side) CL2 Paper Input Unit Feed Clutch PIU (right side) CL3 T ray 1 Feed Clutch T ray 1 Drive Unit Fan 1 Laser/Scanner Fan Under T op Cover Fan 2 L VPS Fan L VPS Fan 3 Formatter Fan Below Formatter Fan 4 Face-Down Delivery Unit Fan Under T op Cover MT1 Main Motor Behind HVPS PS1 Regis[...]

Figure 5-15 Printer Sensors, Solenoids, Clutches, Motors, and Fans. 5-22 Functional Overview[...]

2000-Sheet Input Unit (T ray 4) Components The components of the 2000-Sheet Input Unit paper path are illustrated in Figure 5-16. Figu re 5-17 and Table 5- 2 i llustrate and d escribe all of its sensors, switches, clutches, and motors. Paper Stack Lifting Plate Separation Roller Lower Transfer Assembly Rollers Transfer Assembly Upper Transfer Assem[...]

Control Device Title Location CL31 T rans fer Assembly Clutch T rans fer Assembly CL32 Main Drive Clutc h Lower Chassis (behind Back Cover) MT31 Main Motor Lower Chassis (behind Back Cover) PS31 Paper Entry Sensor T ransfer Assembly PS32 Paper Exit Sensor T ransfer Assembly PS33 Paper T ray Empty Sensor Paper Pick-Up A ssembly PS34 Paper T ray Rais[...]

Paper Jam Sensor (PS32) Registration Sensor (PS31) Registration Clutch (CL32) Lifter Clutch (CL31) Main Motor (M1) Paper Quantity Switches (SW601, SW602) Paper Size Switches (SW701 - SW704) Power Supply Controller PCA Transfer Assembly Closed (PS35) Paper Surface (PS34) Paper Tray Empty (PS33) Feed Roller Pick-Up Roller Separation Roller Lifter Sen[...]

2000-Sheet Input Unit Operation All communication and control of the 2000-Sheet Input Unit (and the Multi-Bin Mailbox/Mailbox With Stapler) is through the External Paper Handling (EPH) PCA mounted on the Formatter Assembly. These instructions are sent to the 2000-Sheet Input Unit controller PCA located behind the back cover. The main components of [...]

Paper Size SW701 SW702 SW703 SW704 Ledger (portrait) OFF ON OFF OFF A3 (portrait) ON ON OFF OFF B4 (portrait) OFF OFF ON OFF Legal (portrait) OFF ON ON OFF Letter (landscape) OFF ON OFF ON A4 (landscape) OFF ON OFF ON Table 5-4 2000-Sheet Input Unit Paper Size Switches 5 Functional Overview Functional Overview 5-27[...]

Multi-Bin Mailbox Components The components of the Multi-Bin Mailbox paper path are illustrated in Figure 5-18. Figu re 5-19 and Table 5- 5 i llustrate and d escribe all of its sensors and motors. Face-Up Bin Flipper Assembly Input Paper Guide Metallic Tape Delivery Head Delivery Head Motor Face-Down Bins Bin 1 Bin 8 Eject Rollers Transport Belt De[...]

Control Device Title Location M1 Delivery Head Positi on Motor Upper Left Side M2 Flipper Roller Motor Flipper Unit (left end) M3 Delivery Head Roller Motor Delivery Head (left end) M4 Ejector Motor Under Delivery Head M5 T ransport Belt Motor Lower Left Side PSBelt T ransport Belt Motor Sensor T ransport Belt Motor PSBinEmpty Paper Bin Empty Senso[...]

PSFaceUp PSFUFull PSEntry Delivery Head Position Motor (M1) Flipper Roller Motor (M2) Delivery Head Roller Motor (M3) PSExit IRLED PSEject PSBinFull/ Head Position PSBinEmpty PSExit 2 PSBelt Transport Belt Motor (M5) Controller PCA Ejector Motor (M4) Interlock Switch (SW1) Figure 5-19 Multi-Bin Mailb ox/M ailbox With Stapler Sensors a nd M otors 5-[...]

Multi-Bin Mailbox Operation All communication and control of the Multi-Bin Mailbox (and the 2000-Sheet Input Unit) is through the External Paper Handling (EPH) PCA mounted on the Formatter Assembly. Thes e instructions are sent to the Multi-Bin Mailbox controller PCA located at the bottom of the frame. The main components of the Multi-Bin Mailbox a[...]

trailing edge is sensed by PSFaceUp. The Flipper Roller motor (M3) then reverses and feeds the sheet down between the transport belt and the metallic tape into the delivery head at the accellerated speed of 500 mm per second. There is a magnetic strip on the guide behind the transport belt. When a sheet of paper is fed down the transport belt, the [...]

Stapling Unit Components The components of the Stapling Unit paper path are illustrated in Figur e 5-20. Figure 5-21 and Ta ble 5 -6 illustrate and describe a ll of its sensors and motors. PAPER FEED CYCLE STAPLING CYCLE EJECT CYCLE STACKING Figure 5-20 Stapling Unit Paper Paths 5 Functional Overview Functional Overview 5-33[...]

Control Device Title Location M1 Stapler DC Motor Stapler Assembly M2 Rack Stepper Motor T op Cover Assembly M3 Slider Stepper Motor T op Cover As sembly M4 Retainer DC Motor Stapling Bed Assembly IR Sensor Infra Red Sensor Stapl ing Bed Assembly STL Sensor Stapler Sensor Stapler Assembly PSRack Rack Sensor T op Cover Assembly PSSlider Slider Senso[...]

PSSlider NextBin FullSensor PSBinFull M3 M2 STLOut M1 STLSensor SW1 PSRetainer M4 PSRack IRSensor Figure 5-21 Stapler Sensors and Motors 5 Functional Overview Functional Overview 5-35[...]

The major assemblies and subassemblies of the stapler are shown in Table 5-7. Mailbox with Stapler Operation All communication and control of the Mailbox, the 2000-Sheet Input Tray, and the Stapler is through the External Paper Handling Controller (EPH) PCA mounted in the Formatter Assembly. These instructions ar e sent to the stapler controller PC[...]

the left wall of the Stapling Bed. This cycle is repeated until the amount of sheets to be stapled is reached (with a maximum of 20). Stapling Cycle The Sliders move the stack of sheets to the stapling position. The Registration Pusher applies slight pressure to the stack of sheets toward the left wall of the Stapling Bed, where the stapler is loca[...]

Printer Input Sources Paper Size Switches The paper guides in Trays 2 and 3 operate four levers at the back of the trays which activate the size sensing switches (SW1601 through SW1604) mounted in the printer chassis. Table 5-8 compares paper sizes to switch conditions. Printing from T rays 2 and 3 The Pickup, Feed, and Separation rollers start rot[...]

Printing from T ray 1 The presence of paper in Tray 1 is detected by the Tray 1 Paper Present Sensor (PS1301). The lifting plate pressurization solenoid (SL2) is then activated, releasing the plate which applies upward pressure on the paper, causing it to contact the Tray 1 pickup roller. The Tray 1 Feed Clutch (CL3) turns on at this time and feeds[...]

Paper Jam Detection The PIU Sensor (PS2), the Registration Sensor (PS1), the Fuser Delivery Sensor (PS1403), and the Face-Down Delivery Sens or (PS1402) detect when paper is moving through the printer (see Figure 5-15 for sens or locations). If a paper jam is detected, the DC Controller immediately stops the printing process and causes a 13.x PAPER[...]

Figure 5-22 General Timing Diagram (1 of 2) for LJ 5Si/5Si MX 5 Functional Overview Functional Overview 5-41[...]

Figure 5-23 General Timing Diagram (2 of 2) for LJ 5Si/5Si MX 5-42 Functional Overview[...]

6 Removal and Replacement Chapter Contents Removal and Replacement Strategy . . . . . . . . . . . . . . . . . . . . 6-5 Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 User Installable Accessories . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Disk Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Formatter Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-38 Fusing Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-40 Laser/Scanner Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 6-41 Main Gear Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-42 Main Motor Assembly . . . . .[...]

Motor, Transport Belt and Encoder Assembly . . . . . . . . . . . . 6-96 Paper Bins and Blind Cover . . . . . . . . . . . . . . . . . . . . . . 6-98 PCA, Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-99 Strings, Anti-Curl . . . . . . . . . . . . . . . . . . . . . . . . . . 6-100 Stapling Unit Assembly . . . . . . . . . . . . .[...]

6-4 Removal and Replacem ent[...]

Removal and Replacement Strategy This chapter documents removal and replacement of major as semblies. Replacement is generally the reverse of removal. Occasionally, directions for difficult or critical replacement procedur es are included. WARNING! Unplug the power cord from the power outlet befor e attempting to service the printer. If this warnin[...]

Required T ools • #2 magnetized Phillips screwdriver (6-inch shaft) • Small flat-blade Screwdriver • Small pair needle-nose pliers • T-15 Torx Driver ( 6-inch shaft) All components in the printer and in the 2000-Sheet Input Unit use Phillips head screws which require a #2 size Phillips screwdriver. Figure 6-1 shows the difference between a [...]

User Installable Accessories Memory and Personality Upgrade Caution SIMM’s and the Formatter PCA can be damaged by small amounts of electrostatic discharge (ESD). Wear an anti-static wrist wrap. 1 With the printer OFF and unplugged, loosen the two captive screws and remove the Formatter PCA. 2 Remove the SIMM from the anti-static package. Hold th[...]

Disk Drive Note When the disk drive is replaced, all fonts and macros must be re-loaded. 1 The Disk Drive is mounted on the upper front corner of the Formatter PCA under MIO card No. 1 (if installed). 2 With the printer OFF and unplugged, loosen (2) captive screws and remove the Formatter Assembly. Remove MIO card No. 1, if installed. 3 Place the F[...]

To Reinstall Disk Drive 1 Locate the four disk drive mounting holes on the Formatter Assembly. Remove the drive from the packaging and align with to the mounting holes. 2 Tilt the drive up and insert latch A (nearest the board edge) in the hole, then slide the drive toward the center of the formatter board. 3 Push down firmly on the cover of the di[...]

Duplex Unit 1 With the printer turned OFF and unplugged, open the Diverter door on the left side of the printer. 2 Push down the green release lever located at the lower right of the Duplex Unit and slide it straight out of the printer. 6-10 Removal and Replacem ent[...]

Envelope Feeder 1 With the printer turned OFF and unplugged, slide the Envelope Feeder up and out of the printer. 6 Removal and Replacement Removal and Replacement 6-11[...]

External Paper Handling Controller 1 With the printer turned OFF and the power cable unplugged, disconnect all interface cables from the Formatter Assembly. 2 Loosen (2) captive screws and remove the Formatter Assembly. Remove MIO card No. 2, if installed. 3 Unplug the ribbon cable connector (1), remove the connector mounting screws (2), and lift t[...]

T ray 4 (2000-Sheet Input Unit) 1 With the printer turned OFF and the power cable unplugged, disconnect all interface cables from the Formatter Assembly and from Tray 4. WARNING! The printer weighs approximately 100 pounds. Use at least four people to lift it. 2 Lift the printer clear of the Tray 4 assembly and place it on a smooth, sturdy surface.[...]

Multi-Bin Mailbox/Mailbox W ith Stapler 1 With the printer turned OFF and unplugged, disconnect the power and interface cables from the Multi-Bin Mailbox/Mailbox With Stapler controller PCA. 2 Carefully slide the Multi-Bin Mailbox/Mailbox With Stapler away from the printer until the locator tabs and the lower guide rail are clear. To Reinstall: 1 M[...]

Hardware T able Note The screws listed in Table 6-1 are also listed in Chapter 8 with their respective assemblies. Example Reference Description Part Number Usage CH101 S crew , TP , M3X6 (fixed shoulder) XA9-0267-000CN General, Metal to metal CH102 S crew , TP , M3X6 (floating flat and lock washer) XA9-0547-000CN General, Pl astic over metal CH103[...]

CH107 S crew , tapping, pan head, M4X10 XB4-7401-009CN Diverter A ssembly , Face-Up Solenoid As sy CH108 S crew , TP , M4X6 XB6-7400-606CN 2000-Sheet Input Unit, general use CH109 S crew , TP , M4X6 XB6-7400-607CN 2000-Sheet Input Unit, right cover CH110 S crew , TP , M3X6 XB6-7300-607CN 2000-Sheet Input Unit, T ransfer Assembly CH111 S crew , T or[...]

Control Panel 1 While pushing in on the side of the printer (Figure 6-2, callout 1) lift up on the forward edge of the control panel to r elease the plastic retaining tab . 2 Remove the cable from the retainer and unplug the contr ol panel connector . To Reinstall: Plug in the cable, replace the cable in its retainer, insert the rear edge of the co[...]

Covers There are five cover assemblies in this pr inter: • AC Access Cover, located at the left rear of the pr inter. • Back Cover, provides access to the HVPS, DC Controller, LVPS, and Main Motor. • Front Cover, including front access door. • Left Lower Cover, located below the Diverter Access Door. • Top Cover, provides access to the Fa[...]

Back Cover Note The metal back cover and the plastic panel at the right rear are removed as a single unit. The square opening at the upper rear corner on the right side plastic panel is the engine test access. 1 Remove (5) screws, CH102 (Figure 6-4, callout 1). 2 Open the top cover door and remove (1) screw, CH102 (Figure 6-4, callout 2) 3 Open the[...]

Front Cover 1 Open all access doors and remove the Duplex Unit if installed. 2 Open front access door and remove (3) screws, CH102 (Figure 6-5, callout 1). 3 Open the Diverter Access Door and release the two plastic retaining tabs inside the Duplex Unit cavity (Figure 6-6, callout 2). Caution Be careful, the plastic upper retaining tabs will break [...]

Front Cover (1 of 2) Front Cover (2 of 2) Figure 6-5 Figure 6-6 6 Removal and Replacement Removal and Replacement 6-21[...]

Left Lower Cover Caution Be careful not to damage the plastic guides on the inside of the lower left cover. They are part of the Duplex Unit paper path. 1 Remove the Diverter Assembly acc ess door (see Figure 6-13). 2 Remove (2) screws, CH102 (Figure 6-7, callout 1) 3 Press down firmly on the top cover outer ends to release the retaining tabs on th[...]

T op Cover 1 Remove Control Panel (see Figure 6-2), and r emove (1) screw, CH102 (Figure 6-8, callout 1). 2 Open the Diverter Assembly access door and rem ove (1) screw, CH102 (Figure 6-8, callout 2). 3 Open the top cover door and remove (1) screw, CH102 (Figure 6-9, callout 3). Caution Be careful not to damage the Face-Down Bin Full sensor flag (F[...]

Top Cover (1 of 2) Top Cover (2 of 2) Figure 6-8 Figure 6-9 6-24 Removal and Replacem ent[...]

Delivery Unit (for Face-Down Bin) 1 Remove the following components: • Formatter Assembly (see Figur e 6-24) • AC Access Cover (see Figure 6-3) • Top Cover (see Figure 6-8) • Front Cover (see Figure 6-5) 2 Unplug and re-route the fan cable out of the way (Figur e 6-10, callout 1). 3 Remove (1) screw, CH101 (Figure 6-10 , callout 2 to loosen[...]

Delivery Unit (1 of 2) Delivery Unit (2 of 2) Figure 6-10 Figure 6-11 6-26 Removal and Replacem ent[...]

Diverter Assembly Caution Support the Diverter Assembly access door dur ing this procedure to prevent damage to the plastic hinge pins. 1 Open the Diverter Assembly access door and releas e the support struts (Figure 6-12, callout 1) by sliding the strut ends forward and downwar d. 2 Remove (6) self-tapping screws, CH106 (Figure 6-12, callout 2). N[...]

Door Assembly , Diverter 1 Open the Diverter access door and release the support struts (Figur e 6-13, callout 1) by sliding the strut ends forward and downward. 2 Rotate the door up to align the flat sides of the right hinge pin with the retaining slot (Figure 6-13, callout 2), and lift upwar ds to release it from the retaining slot. 3 Continue li[...]

Door Assembly , Right Lower 1 Remove the back cover assembly (see Figur e 6-4). 2 Remove Tray 2 and Tray 3. 3 Open the Right Lower Door and release the lower end of the support strap (Figure 6-14, callout 1). 4 Remove (4) screws, CH102 (Figure 6-15, callout 2). 5 Release two retainer tabs from the inside of the Tray 3 cavity (F igure 6-16, callout [...]

Right Lower Door Assembly (2 of 3) Right Lower Door Assembly (3 of 3) Figure 6-15 Figure 6-16 6-30 Removal and Replacem ent[...]

Fan 1, Exhaust (Laser/Scanner) and Housing Fan Housing 1 Remove the toner cartridge. 2 Remove the top cover (see Figure 6-8). 3 Remove and re-route cables away fr om fan housing (Figure 6-17, callout 1). 4 Release the housing retainer clip located inside the toner cartr idge cavity (Figure 6-17, callout 2), and lift the housing up and out of the ch[...]

Fan Motor 1 Unplug the fan cable from the DC Controller PCA. 2 Remove (2) screws, CH101 (Figure 6-18, callout 3), and lift the fan and bracket assembly out of the chassis. 3 Remove (2) screws, CH104 (Figure 6-18, callout 4), to separate the fan motor from the bracket. Fan 1, Laser/Scanner (2 of 2) Figure 6-18 6-32 Removal and Replacem ent[...]

Fan 2, Exhaust (L VPS) 1 Remove back cover (see Figure 6-4). 2 Remove the fan cable from the DC Controller PCA (Figur e 6-19, callout 1). 3 Remove (2) screws, CH104 (Figure 6-19, callout 2). Fan 2, LVPS Figure 6-19 6 Removal and Replacement Removal and Replacement 6-33[...]

Fan 3, Intake (Formatter) and Housing Fan Motor Note The fan motor (FM3) can be removed without removing the housing assembly. 1 Remove the back cover (see Figure 6-4). 2 Unplug the fan connector (Figure 6-20, callout 1). Caution Do not bend the fan retainer clips upward. Release them by pinching. 3 Release the (2) retainer clips (Figure 6-20, call[...]

Fan 4, Exhuast (Delivery Unit) 1 Remove the top cover (see Figure 6-8). 2 Unplug the fan cable (Figure 6-21, callout 1). 3 Remove (1) screw, CH101 (Figure 6-21, callout 2), and remove the metal fan shield. 4 Release (4) retainer clips (Figure 6-21, callout 3), and slide the fan forwar d out of the Delivery Unit Assembly. Fan 4, Delivery Unit Figure[...]

Feeder Assembly 1 Open the left access door and remove the Duplex Unit (if installed). 2 Remove the Fuser Assembly (see Figur e 6-25). 3 Open the Top Cover and remove the Toner Cartridge. 4 Remove the Transfer Roller Ass embly (see Figure 6-51). 5 Remove the Registration Assembly (see Figur e 6-42). 6 Unplug the sensor cable at the right side of th[...]

Feeder Assembly (1 of 2) Feeder Assembly (2 of 2) Figure 6-22 Figure 6-23 6 Removal and Replacement Removal and Replacement 6-37[...]

Formatter Assembly 1 If the Formatter is to be replaced, make sure to note the page count. 2 Loosen the two captive screws (Figure 6-24, callout 1) and slide the Formatter PCA out of the chassis. 3 After installation of a replacement Formatter, be sure to re-enter the ser ial number, page count, and maintenance count. (S ee the following instructio[...]

Setting Page Count, Maintenance Count, and Serial Number The page count, maintenance count, and printer ser ial numbers are stored in Non-Volatile Memory. PAGECOUNT is the total number of images printed by the printer, MAINTCOUNT is the pagecount when the next preventive maintenance should be performed (every 350,000 images) (250,000 images with HP[...]

Fusing Assembly 1 Open the Diverter Assembly access door and rem ove the Duplex Unit if installed. Caution Use the upper levers to release the Fusing Assembly, NOT the lower levers. The lower levers set the pressure rollers inside the Fusing As sembly for envelope printing (down for single sheets, up for envelopes). 2 Release the Fusing Assembly by[...]

Laser/Scanner Assembly Caution The Laser Scanner diode is extremely sensitive to ESD. 1 Remove the toner cartridge. 2 Remove the top cover (see Figure 6-8). 3 Unplug three cable connectors (Figure 6-26, callout 1). 4 Re-route the cable running across the top of the assembly so that it is out of the way. Caution Do not touch the scanner mirror locat[...]

Main Gear Assembly 1 Remove the following components in the order listed: • Toner Cartridge • Tray 1 • Tray 2 • Transfer Roller Assembly (s ee Figure 6-51) • Back Cover Assembly (see Figure 6-4) • Tray 1 Assembly (see Figure 6-52) • Right Lower Door Assembly (see Figure 6-14) • Paper Input Unit (see Figure 6-31) • HVPS (see Figure[...]

Main Gear Assembly (1 of 3) Main Gear Assembly (2 of 3) Figure 6-27 Figure 6-28 6 Removal and Replacement Removal and Replacement 6-43[...]

Main Gear Assembly (3 of 3) Figure 6-29 6-44 Removal and Replacem ent[...]

Main Motor Assembly 1 Remove the back cover (see Figure 6-4). 2 Remove the HVPS (see Figure 6-40). 3 Unplug the connector (Figure 6-30, callout 1). Caution Be careful when removing the Main Motor. The steel drive shaft can damage the plastic gears. 4 Remove (4) screws, CH103 (Figure 6-30, callout 2). To Reinstall: Align the Main Motor to the chassi[...]

Paper Input Unit (PIU) Caution Remove both Tray 2 and Tray 3 to prevent damage to the PIU plastic sensor flags. 1 Remove Tray 2 and Tray 3. 2 Remove the back cover (see Figure 6-4). 3 Remove the Tray 1 Assembly (see Figure 6-52). 4 Remove the Right Lower Door Assembly (see Figur e 6-14). 5 Remove (4) screws, CH102 (Figure 6-31, callout 1). 6 Slide [...]

PCA, DC Controller 1 Remove the Formatter Assembly (see Figur e 6-24). 2 Remove the back cover (see Figure 6-4). 3 Remove the High Voltage Power Supply (see Figure 6-40). 4 Unplug (18) connectors from the PCA (Figur e 6-32, callout 1). Note: For the 5Si HM (C3124A), you also need to disconnect the Thermal Control Cable (Figure 6-32, callout 6). 5 R[...]

PCA, Output Paper Sensor 1 Remove the following components in the order listed: • Toner Cartridge • Formatter Assembly (see Figur e 6-24) • AC Access Cover (see Figure 6-3) • Top Cover (see Figure 6-8) • Back Cover (see Figure 6-4) • Fan 3 and Housing Assembly (see Figur e 6-20) • HVPS (see Figure 6-40) • DC Controller PCA (see Figu[...]

Output Paper Sensor PCA (1 of 4) Output Paper Sensor PCA (2 of 4) Figure 6-33 Figure 6-34 6 Removal and Replacement Removal and Replacement 6-49[...]

Output Paper Sensor PCA (3 of 4) Output Paper Sensor PCA (4 of 4) Figure 6-35 Figure 6-36 6-50 Removal and Replacem ent[...]

PCA, Paper Size 1 Remove the following components in the order listed: • Toner Cartridge • Trays 2 and 3 • Back Cover (see Figure 6-4) • LVPS (see Figure 6-41) 2 Unplug the fan cable from the left side of the connector (Figur e 6-37, callout 1), remove (1) screw, CH102 (Figure 6-37, callout 2), and remove the plastic shield (Figure 6-37, ca[...]

Paper Size PCA (2 of 3) Paper Size PCA (3 of 3) Figure 6-38 Figure 6-39 6-52 Removal and Replacem ent[...]

Power Supply , High V oltage (HVPS) 1 Remove the back cover (see Figure 6-4). 2 Unplug the cable from the LVPS to the DC Controller PCA (Figure 6-40, callout 1), and move it out of the way. 3 Unplug the connector from the bottom of the HVPS (Figure 6-40, callout 2). Note DO NOT remove the screw indicated in Figure 6-40 by the null symbol (ø). 4 Re[...]

Power Supply , Low V oltage (L VPS) 1 Remove the Formatter Assembly (see Figur e 6-24). 2 Remove the back cover (see Figure 6-4). 3 Remove Fan 3 and its Housing Assembly (s ee Figure 6-20). 4 Unplug (3) LVPS connectors (Figure 6-41, callout 1). 5 Unplug the LVPS fan (FM1) cable from the DC Controller (F igure 6-41, callout 2). 6 Remove (7) screws, [...]

Registration Assembly 1 Open the top cover door and remove the toner cartridge. 2 Remove the Transfer Roller Ass embly (see Figure 6-51). 3 Remove the Main Gear Train Shield. Release the retainer clip (Figur e 6-43, callout 1) and lift the forward end up. 4 Unplug the clutch cable from the clutch on the right end of the Registration Assembly (Figur[...]

Registration Assembly (1 of 3) Registration Assembly (2 of 3) Figure 6-43 Figure 6-42 6-56 Removal and Replacem ent[...]

Registration Assembly (3 of 3) Figure 6-44 6 Removal and Replacement Removal and Replacement 6-57[...]

Roller and Separation Pad, T ray 1 Feed Roller 1 Open Tray 1 door and remove the plastic shield. 2 Pinch retainer tabs together (Figure 6-45, callout 1) and slide the roller to the left, off of the shaft. Tray 1 Feed Roller Figure 6-45 6-58 Removal and Replacem ent[...]

Separation Pad Open Tray 1 door and remove the Feed Roller Insert a flat bladed screwdriver into the slot (Figur e 6-46, callout 2) and carefully pry the separation pad upwards out of its retaining notches. To Reinstall: Make sure the metal edge of the Separation pad faces forward. Tray 1 Separation Pad Figure 6-46 6 Removal and Replacement Removal[...]

Rollers: T ray 2 & 3, Pickup, Feed, and Separation Note There are three rollers for each tray: The Pickup Roller, the Feed Roller, and the Separation Roller. The Feed and Separation Rollers are interchangeable with each other and between trays. The Pickup Rollers are interchangeable between trays. • Tray 2 Pickup Roller: Figure 6-47, callout [...]

Sensor , Paper Input Unit (PS2) 1 Remove the following components in the order listed: • Toner Cartridge • Trays 2 and 3 • Transfer Roller (see Figure 6-51) • Registration Assembly (see Figure 6-43) • Front Cover (see Figure 6-5) • Tray 1 Assembly (see Figure 6-52) • Right Lower Door Assembly (see Figure 6-14) Note The sensor retainin[...]

Sensor , Registration (PS1) 1 Remove the following components in the order listed: • Toner Cartridge • Trays 2 and 3 • Transfer Roller (see Figure 6-51) • Registration Assembly (see Figure 6-43) • Front Cover (see Figure 6-5) • Tray 1 Assembly (see Figure 6-52) • Right Lower Door Assembly (see Figure 6-14) • Paper Input Unit (see Fi[...]

Solenoid Assembly , SL3 (Face-Up) 1 Remove the top cover (see Figure 6-8). 2 Remove the Delivery Unit (see Figure 6-10). 3 Remove (1) self-tapping screw, CH107 (Figure 6-50, callout 1). Caution Be careful not to damage the plastic arm when removing the assembly. 4 Pull the forward end of the assembly away from the chassis to clear the locating pin,[...]

T ransfer Roller Assembly Caution Handle the Transfer Roller from the ends only. Do not touch the surfac e of the Transfer Roller. Skin oils will affect its electrical characteristics, resulting in poor image transfer. 1 Open the top cover door and remove the toner cartridge. 2 Grasp the gear (Figure 6-51, callout 1) on the left end and carefully l[...]

T ray 1 Assembly 1 Remove the front cover (see Figur e 6-5) and the back cover (see Figure 6-4). 2 Open the top cover and remove the toner cartridge. 3 Open the right lower door. 4 Remove (4) screws, CH102 (Figure 6-52, callout 1). 5 Carefully pull the assembly out from the printer and unplug the connector inside the right end (Figure 6-52, callout[...]

T ray 2/3 Assemblies Note The paper trays are mechanically aligned to the printer chassis at the factory. If you are replac ing Tray 2 or Tray 3 with a tray other than the original factory installed unit, you may have to adjust the new tray. For details, refer to the Tray 2 and 3 Adjustment Procedure in Chapter 4. 1 Open the tray and pull it out to[...]

T ray 4 (2000-Sheet Input Unit) Back Cover 1 Remove (4) screws, CH108 (Figure 6-53, callout 1), and pull cover back from the chassis. To Reinstall: 1 Make sure the tab on the left lower corner is inserted in its alignment slot. 2 Insert the star lockwasher under the lower right screw. Tray 4, Back Cover Figure 6-53 6 Removal and Replacement Removal[...]

Left Cover 1 Remove (2) screws, CH108 (Figure 6-54, callout 1). 2 Pull out on the top of the cover and lift up on the right side of the cover to clear the retaining tabs along the bottom edge. 3 Pull out on cover at the lower left corner (Figure 6-54, callout 2) to release the plastic retainer tab and lift the cover off. To Reinstall: 1 Place the l[...]

Right Cover 1 Remove the Transfer Assembly (s ee Figure 6-64). 2 Remove (2) screws, CH109 (Figure 6-55, callout 1). 3 Release plastic retaining tab (Figur e 6-55, callout 2). 4 Carefully pull out on the top of the cover while lifting it upward to clear the retaining tabs along the inside bottom of the cover. To Reinstall: 1 Make sure that the retai[...]

Main Drive Assembly 1 Remove the Transfer Assembly (s ee Figure 6-64). 2 Remove the back cover (see Figure 6-53) and the right cover (see Figure 6-55). 3 Unplug (2) connectors (Figure 6-56, callout 1). 4 Remove (4) screws, CH108 (Figure 6-56, callout 2) and pull the assembly straight out of the chassis. Tray 4, Main Drive Assembly Figure 6-56 6-70 [...]

Paper T ray 1 Remove all unused paper from the tray. 2 Remove the Transfer Assembly (s ee Figure 6-64). 3 Remove the left cover (see Figure 6-54) and the right cover (see Figur e 6-55). 4 Remove (1) screw, CH108 (Figure 6-57, callout 1) and the metal retaining tab from each side of the chassis. Caution Support the rear of the tray when rem oving it[...]

PCA, Controller 1 Remove the back cover (see Figure 6-53) and the left cover (see Figur e 6-54). 2 Unplug (8) connectors from the PCA (Figure 6-58, callout 1). 3 Remove (2) screws, CH108 (Figure 6-58, callout 2). 4 Release (2) plastic retaining posts (Figure 6-58, callout 3), and pull the PCA free of the chassis. To Reinstall: Make sure that the PC[...]

Pickup Assembly 1 Open the paper tray to the stops. 2 Remove the Transfer Assembly (s ee Figure 6-64). 3 Remove the right cover (see Figure 6-55) and the Back Cover (see Figure 6-53). 4 Unplug (1) connector (Figure 6-59, callout 1) fr om the front of the Pickup Assembly. 5 Unplug (2) in-line connectors (Figure 6-59, callout 2). 6 Unplug (1) connect[...]

Pickup Assembly Photosensors There are three photos ensors on the Pickup Assembly: • one to sense that the Transfer Ass embly is closed (Figure 6-60, callout 1). • one to sense that the tray has raised the paper to the proper height (Figure 6-60, callout 2). • one to sense that the tray is empty (Figur e 6-60, callout 3). To remove a photosen[...]

Power Supply 1 Remove the back cover (see Figure 6-53) and the left cover (see Figur e 6-54). 2 Unplug the connector from the Power Supply (Figure 6-61, callout 1). 3 Remove (2) screws, CH108 (Figure 6-61, callout 2). 4 Lift the Power Supply up to clear the locating tabs underneath, and slide it to the left to free it from the chassis. To Reinstall[...]

Rollers: Pickup, Feed, and Separation There are three rollers in this as sembly. The upper forward roller is the Pickup Roller, the upper rear roller is the Feed Roller, and the lower roller is the Separation Roller. The Feed and Separation Rollers are interchangeable with each other and between Trays 2 and 3 and 4. The Pickup Roller is interchange[...]

Switch Assembly , Paper Quantity 1 Remove the back cover (see Figure 6-53). 2 Open the paper tray and pull it out to the stops. 3 Unplug the connector (Figure 6-63, callout 1) fr om the Controller PCA and free the cable. 4 Remove (1) screw, CH108 (Figure 6-63, callout 2), and remove the metal retaining spring (Figur e 6-63, callout 3). 5 Slide the [...]

Switch Assembly , Lifter Sensing 1 Lift the printer clear of the HCI and place it on a smooth, stur dy surface. 2 Remove the top cover (2 screws). 3 Remove the back cover (4 screws, Figure 8-7, reference 5). 4 Disconnect the outside cables (connector with two cables) to r elease Microswitch Assembly fr om the back top of the frame. 5 Remove the scr[...]

Tray 4, Transfer Assembly Figure 6-64 6 Removal and Replacement Removal and Replacement 6-79[...]

Multi-Bin Mailbox/Mailbox W ith Stapler Covers The procedure for r emoving the left and right covers is the same. 1 Using a small flat-blade screwdriver, release (3) retaining tabs (Figur e 6-65, callout 1) along the rear edge of the cover and rotate the cover clear of the frame. To Reinstall: Make sure that the retaining tabs along the front edge [...]

Delivery Head Assembly 1 Remove the left cover (see Figure 6-65). 2 Remove all paper bins and the blind cover (see Figure 6-86) or the stapling unit (see Figure 6-91). 3 Release the top of the Metallic Tape (see Figure 6-79). 4 Unlock the cable clip (Figure 6-66, callout 1) and unplug the ribbon cable (Figure 6-66, callout 2) from the left end of t[...]

Multi-Bin Mailbox/Mailbox with Stapler, Delivery Head Mounting Screws Multi-Bin Mailbox/Mailbox with Stapler, Delivery Head Pulley Detail Figure 6-67 Figure 6-68 6-82 Removal and Replacem ent[...]

Flipper Assembly 1 Remove all paper bins and the blind cover (see Figure 6-86). 2 Remove the Left and Right Covers (see Figure 6-65). 3 Remove the Delivery Head Position Motor (see Figure 6-82). 4 Remove the Jam Access Door (see Figur es 6-74 through 6-76). 5 Remove the (2) inside screws closest to the front of the unit, CH112 (Figure 6-70, callout[...]

Multi-Bin Mailbox/Mailbox with Stapler, Flipper Assembly Mounting Screws Multi-Bin Mailbox/Mailbox with Stapler, Flipper Assembly Ground Wire Figure 6-70 Figure 6-71 6-84 Removal and Replacem ent[...]

Input Paper Guide 1 Remove the paper bins and the blind cover (see Figure 6-86). 2 Open the Jam Access Door and disconnect the ground wir e from the bottom of the Flipper Roller Motor (Figure 6-71, callout 3). 3 From the rear of the unit, release the Paper Guide retaining tabs (Figure 6-72, callout 1). 4 Carefully pull the paper guide free of the f[...]

Interlock Switch 1 Remove the left cover (see Figure 6-65). 2 Disconnect (2) wires fr om the Interlock Switch (Figure 6-73, callout 1). 3 Press the retainer tabs together (Figure 6-73, callout 2) to r elease the switch and remove it from the rear of the unit. Multi-Bin Ma ilb ox/Mailbox with Stapler, Inte rlock Switch Figure 6-73 6-86 Removal and R[...]

Jam Access Door Assembly 1 Remove the left and right covers (see Figure 6-65). 2 Remove the Delivery Head Position Motor (see Figure 6-82). 3 Remove all paper bins and the blind cover (see Figure 6-86). 4 Release the upper end of the Metallic Tape (see Figure 6-79). 5 Release (2) retaining springs (Figur e 6-74, callout 1). 6 From the front of the [...]

Multi-Bin Ma ilb ox/Mailbox with Stapler, J a m Access Door Springs Multi-Bin Ma ilb ox/Mailbox with Stapler, J a m Access Door E-Clip Note Figure 6-76 with callout 3 is on the following page. Figure 6-74 Figure 6-75 6-88 Removal and Replacem ent[...]

Multi-Bin Mailbox/Mailbox with Stapler, Jam Access Door String Connection Figure 6-76 6 Removal and Replacement Removal and Replacement 6-89[...]

Lower Elevator Pulley Assemblies 1 Remove all paper bins and the blind cover (see Figure 6-86). 2 From the front of the unit, disc onnect (2) tension springs (Figur e 6-77, callout 1). 3 From the back of the unit, release (2) lower pulley assemblies by pushing down on the assembly, and then pushing it forward (F igure 6-78, callout 2). Note that th[...]

Multi-Bin Ma ilb ox/Mailbox with Stapler, Elevato r Pulley Tension Spring Multi-Bin Ma ilb ox/Mailbox with Stapler, Pu lle y Housing Release Figure 6-77 Figure 6-78 6 Removal and Replacement Removal and Replacement 6-91[...]

Metallic T ape and Housing Assembly 1 Remove all of the paper bins, and the blind cover (see Figure 6-86). 2 Lower the Delivery Head to the bottom of the frame. 3 Release the tape retainer by pushing the tab (see Figure 6-79, callout 1). 4 Carefully rewind the tape into its housing. Do not allow the tape to freely snap back into the housing (see Fi[...]

Multi-Bin Mailbox/Mailbox with Stapler, Metallic Tape Retaining Pin Multi-Bin Mailbox/Mailbox with Stapler, Metallic Tape Release Note Figure 6-81 with callout 3 is on the following page. Figure 6-79 Figure 6-80 6 Removal and Replacement Removal and Replacement 6-93[...]

Multi-Bin Mailbox/Mailbox with Stapler, Metallic Tape Housing Figure 6-81 6-94 Removal and Replacem ent[...]

Motor , Delivery Head Position 1 Remove the left cover (see Figure 6-65). 2 Unplug the cable connector (Figure 6-82, callout 1). 3 Remove (2) screws, CH112 (Figure 6-82, callout 2), slide the motor downward to release it from the fr ame, and lift it straight out of the frame. To Reinstall: Make sure that the motor is positioned in the frame with th[...]

Motor , T ransport Belt and Encoder Assembly 1 Remove the left cover (see Figure 6-65). 2 Remove all paper bins and the blind cover (see Figure 6-86). 3 Remove the Controller PCA (see Figure 6-87). 4 Remove (2) screws, CH112, from the motor assembly (Figure 6-83, callout 1). 5 Remove the small drive belt (Figure 6-84, callout 2) fr om the motor dri[...]

Multi-Bin Ma ilb ox/Mailbox with Stapler, Tr ansport Be lt Drive Gear Multi-Bin Mailbox/Mailbox with Stapler, Transport Belt Encoder Figure 6-84 Figure 6-85 6 Removal and Replacement Removal and Replacement 6-97[...]

Paper Bins and Blind Cover The procedure for r emoving the paper bins and the blind cover is the same. Each bin rests in its labeled slot. 1 Remove the paper bins and the blind cover from the top down. 2 Lift up on the outer edge of the bin (or blind cover) to clear the retaining notch, and pull it forward out of the frame (F igure 6-86). To Reinst[...]

PCA, Controller 1 Remove all paper bins and the blind cover (see Figure 6-86). 2 Lay the Multi-Bin Mailbox/Mailbox With Stapler over onto its right side. 3 Remove (1) grounding screw, CH112 (Figure 6-87, callout 1), and four self-tapping screws, CH113 (Figure 6-87, callout 2). 4 Unplug all of the connectors from the PCA. 5 Remove the PCA from its m[...]

Strings, Anti-Curl The Anti-Curl Strings are attached to the Jam Acc ess Door Assembly at the top of the frame, routed through small pulleys at the back of the Delivery Head Assembly, and then around pulleys near the bottom of the fram e, where they are attached to tension spr ings. 1 Remove all of the paper bins, and the blind cover (see Figure 6-[...]

Multi-Bin Mailbox/Mailbox with Stapler, Anti-Curl String Upper Connection Multi-Bin Mailbox/Mailbox with Stapler, Anti-Curl String Middle Connection Figure 6-89 Figure 6-90 6 Removal and Replacement Removal and Replacement 6-101[...]

Stapling Unit Assembly The Stapling Unit Assembly is mounted in the Mailbox with Stapler, replacing the three top output bins. 1 Turn OFF the printer. 2 Make sure the Delivery Head Assembly is not in the stapler area. It should be in the bottom portion of the mailbox. You can move the Delivery Head Assembly downward gently with your hand. 3 Disconn[...]

Back Plate 1 Remove the Stapling Unit Assembly (see Figure 6-91). 2 Remove the Scan Bar by carefully pressing the tab on the scan bar backwards and downwards through the hole of the Stapling Bed (see Figure 6-92) with a flat-tip screwdriver, then lift the bar. 3 Remove the torx screw joining the Back Plate with the Stapling Unit (see Figure 6-93, c[...]

Figure 6-93 6-104 Removal and Replacement[...]

Stapling Unit Controller PCA 1 Remove the Stapling Unit Assembly (see Figure 6-91). 2 Remove the Back Plate (see Figure 6-92). 3 Remove (2) screws located on the right side of the Stapling Unit, holding the PCA board (see Figure 6-94, callout 1). 4 Unplug the cables that are connected to the PCA. Identify their color and size, and the ground cables[...]

Figure 6-95 Figure 6-96 6-106 Removal and Replacement[...]

T op Cover Assembly 1 Remove the Stapling Unit Assembly (see Figure 6-91). 2 Open the Top Cover Assembly and remove the Back Plate (see Figur e 6-92). 3 Unplug the ground and signal cables from the right side of the Stapling Unit Controller board, being careful to keep them in the cable holder. 4 On each side of the assembly, pull the hinge to rele[...]

Stapling Bed Assembly 1 Remove the Stapling Unit Assembly (see Figure 6-91). 2 Remove the Back Plate (see Figure 6-92). 3 Remove the Stapler Unit Controller PCA (see Figure 6-94). 4 Remove the Top Cover Assembly (see Figur e 6-97). 5 Remove the wire frame by pushing both arms of the wire frame toward the center to clear the retaining notches and li[...]

Hinges 1 Remove the Stapling Unit Assembly (see Figure 6-91). 2 Remove the Top Cover Assembly (see Figur e 6-97). 3 Remove the Stapling Bed Assembly (see Figure 6-98). 4 Release the brushes bar from the retaining notches and lift upwards. 5 Remove (2) screws joining each hinge to the housing (see Figure 6-99, callout 1). 6 Disconnect the (2) cables[...]

6-110 Removal and Replacement[...]

7 T roubleshooting Chapter Contents Troubleshooting Process . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Power-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 Engine Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Troubleshooting Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-77 Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-77 General Troubleshooting Information . . . . . . . . . . . . . . . . . . . . . 7-80 Miscellaneous Problems and Solutions . . . . . . . . . . . . . . . . . . . 7-80 Paper Curl . . . . [...]

T roubleshooting Process The troubleshooting process is a systematic appr oach that addresses the major problems first and then other problems as you identify the causes for printer malfunctions and errors. The Troubleshooting Process, Figure 7-1, on the following two pages, illustrates the major steps for troubleshooting the printing system. Each [...]

Figure 7-1 HP LaserJet 5Si / 5Si MX / 5Si Mopier Troubleshooting Process 7-4 Troubleshooting[...]

Figure 7-2 HP LaserJet 5Si / 5Si MX / 5Si Mopier Troubleshooting Process 7 Troubleshooting Troubleshooting 7-5[...]

Power -On Overview It is important to have the printer’s Control Panel functional as soon as possible in the troubleshooting process so that the printer’s diagnostics can assist in locating printer err ors. Problem Action 1. Is AC power avai lable at the printer ’ s power receptacle? V erify . See T able 1-7. 2. Is the printer ’ s ON/OFF sw[...]

Fan Location and Airflow Note When the printer is in PowerSave mode, the fans are off. Fan Number Fan Name Fan Location 1 Laser/Scanner fan Exhaust air fl ows from the back of the printer , on the left-hand side of the fus ing assembly . 2 Low-voltage Power Supply Lower ri ght-hand corner of the printer . 3 Formatter (intake) Intake fan directly ab[...]

Engine T est The engine test verifies that the print engine is functioning correctly. The Formatter PCA is completely bypassed during an engine test. This test is very useful for isolating printer problems. The engine test prints a full page of horizontal lines acr oss the entire printable area, and is also us eful for checking and adjusting regist[...]

Display Overview Use the printer’s Control Panel to access the error log to troubleshoot the printer. With the printer’s test menu, you can access the printer’s error log to display more information about the current err or. The error log retains the printer’s last 50 error messages. Refer to the section titled “Reference” for more info[...]

Configuration Use the configuration pages to verify the proper installation of accessories, options, and personalities. When you print the configuration pages, the printer checks its internal controller and I/O interfac e, then prints two pages. One shows the overall printer configuration, and the other one shows the current menu settings. Refer to[...]

Device Action if installed and not detected Duplex Unit Power-of f, reseat, verify connector is not brok en, then replace duplex cabl e and/or duplex unit and power-on. Envelope Feeder Power-of f, reseat or replac e envelope feeder and power-on. Device 1 2000 Sheet Input Unit Device 2 Multi-Bi n Mailbox Device 3 Stapler Module V erify C-Link c able[...]

Configuration Page Illustration and Key Configuration Page Example The default S/N is AAXXYY99999. To set the correct S/N, refer to the SERVICE MODE procedure in Chapter 3 of this manual. The three most recent error log messages display here. All the paper handling devices that are physically present should be li sted in this section. Verify that e[...]

Menu Page Example Menu Page Example Figure 7-6 7 Troubleshooting Troubleshooting 7-13[...]

Communications Link (C-Link) Cables Communications Link (C-Link)Cables, Supported Daisy Chain Connections All C-Link cables have a single dot molded into the device output connector cable end, and two dots molded into the device input connector cable end. The devices may not be recognized by the External Paper Handling Controller if the cables are [...]

Image Quality When you are working with customers, obtain a print sample before you begin troubleshooting their printer. Ask the customer to explain the quality they expect from the printer. The print sample will also help clar ify the customer’s explanation. Problem Action 1. Do you have a print sample? Obtain a pri nt sample from the customer .[...]

Check the T oner Cartridge Image formation defects are often the result of toner cartridge problems. If there is any doubt, always replace the toner cartridge before troubleshooting image defects. Use the following check list to ensure that the toner cartridge is still operable. • Ensure that the toner cartridge has toner. Full toner cartridge we[...]

Error Log Use the error log to diagnos e and troubleshoot printer err ors and intermittent failures. Also, you can use "Show Error Log" under "Display and Evaluate the Error Log" discussed earlier in this chapter. Print and Evaluate the Error Log The printer’s internal error log stores the last 50 errors and can be printed. To[...]

Whenever a 13.xx appears on the Control Panel, a good practice is to clear all the paper from the printer, take the printer offline, and print the er ror log. If you cannot print the error log, you can still display it on the display panel. Write the error next to the last err or logged. The last error is the error at the top of the err or log prin[...]

Communication Ask the customer to run a print job from the host system. If the print job is successful, proceed to the following step, “Ver ification.” V erify Communication Print the PCL configuration page and study the HP MIO block. The MIO block will appear on the bottom portion of the configuration page. An example of a properly operating M[...]

• The "Novell Status" block should state the Novell printer server name to which the printer is connected. If the node name reads "NPIxxxxxx" (xxxxxx=last six digits of the MIO’s LAN address), the MIO card has not been configured for a Novell server. This could indicate that the card is operating under a IPX protoc ol other [...]

V erification Paper Path T est Using the error trend information fr om Step 5 (Error Log), you may verify a specific printer paper path with the paper path test. You must first set the desired paper destination in the configuration menu and then select the paper path test. The paper path test menu will allow you to select the desired paper source a[...]

Paper Path Test Source and Output Selection Customer Print Job Ask the customer to send a print job from the problem sour ce(s) to the problem destination(s). Try to recreate the paper jam er rors by having the customer do typical print jobs and the type of print job that has been causing the paper jams. Note When verifying print jobs, ensure that [...]

Reference Control Panel Messages and Errors Printer messages displayed on the control panel pr ovide five categories of information. Each message category is assigned a priority. If more than one condition occurs at the same time, the highest priority message is displayed. When it has been cleared, the next priority message will be displayed, and s[...]

Error Log T able Message Error Log Category/ Message Description Recommended Action ACCESS DENIED Status After an attempt to select a l ocked-out function, this message display s for approximately 2 seconds. The JetAdmin Admini strator controls the control panel lockout feature. Request from the administrator to unloc k function. CANCELING JOB Stat[...]

Clearing Staple Jams Scanbar and MBM Interlock Switch (SW1). 1 and 2 - Scanbar gaps. 3 - Multi-Bin Mailbox Interlock Switch Figure 7-11 Figure 7-12 "Home" position gap. When the output bin is full, the flag bloc ks the gap. 7 Troubleshooting Troubleshooting 7-25[...]

Message Error Log Category/ Message Description Recommended Action ENGINE TEST Status This mes sage displays after the engine test button is pressed and i ndicates that the engine test is in process. If the tes t fails, an error or attendance message displ ays. No action required. Refer to the Power On section for more information about performing [...]

High-Voltage Power Supply Contacts 1. Primary Charging Roller Connector 2. Toner Registration/Toner Sensor 3. Developing Roller Bias Connector 4. Drum Ground Connector Figure 7-13 7 Troubleshooting Troubleshooting 7-27[...]

Message Error Log Category/ Message Description Recommended Action HP MIO 2 NOT READY Status The lower MIO card is not ready . One of two situations may oc cur . First, the parallel port and the upper MIO card may conti nue to operate nominally . If the lower MIO card is operating correctl y and communicating wi th the network, this message wi ll d[...]

Message Error Log Category/ Message Description Recommended Action LOAD TRA Y X or LOAD ENV FEEDER <media type> <paper s ize> Attendance Required The printer recei ved a request for a media type and size that is not currently installed i n the printer . Load the indicated tray wi th the correct media, or overri de the media type and siz[...]

Message Error Log Category/ Message Description Recommended Action OUTPUT OPERA TION CONDITION x.yy Attendance Required An external output dev ice has a condi tion that needs to be corrected before pri nting can resume. x = output device 0 = Paper Handling Controller 2 = Multi -Bin Mailbox 3 = Stapler yy = conditi on code For the Multi-Bin Mai lbox[...]

Message Error Log Category/ Message Description Recommended Action PROCESSING JOB FROM TRA Y x Status The pri nter is processing data from the acti ve I/O channel. Some data is printed and some data cannot be printed, suc h as downloading fonts or macros. The media source is the indicated tray . x = tray number 1 = T ray 1 2 = T ray 2 3 = T ray 3 4[...]

Message Error Log Category/ Message Description Recommended Action ST APLER LIMIT REACHED Attendance Required The stapler has reached its maxi mum of 20 sheets to be stapl ed. Remove the 20 sheets from the bin. The printer will automati cal ly continue and stapl e the remaining pages separately . T ONER LOW Attendanc e Required The toner cartridge [...]

Tray 2 (1) and Tray 3 (2) Paper Out Flags Vertical Transfer Door Closed Sensor (PS35) (1.) PS35 Vertical Transfe r Door Switch (2.) Drive Gear (3.) Ve rtical Transfer Door Registrat ion Sensor Flag PS31 (4.) Ve rtical Transfer Door Pape r Jam Sensor Flag PS32 Figure 7-14 Figure 7-15 7 Troubleshooting Troubleshooting 7-33[...]

Message Error Log Category/ Message Description Recommended Action TRA Y 4 EMPTY Status T ray 4 is empty or not li fting. Under normal operating conditions , when T ray 4 is closed the paper stack li fts until the paper is direc tly beneath T ray 4’ s feed rol lers . Photos ens or flag PS34, the paper surface photos ensor , determines when the pa[...]

Message Error Log Category/ Message Description Recommended Action W ARMING UP Status The Fuser i s warming up and the printer is not ready . It may be necessary to display the error log to determine if more i nformation is available to assist y ou in troubleshooting. W ait until the printer signals ready to accept data. The user may access the men[...]

Sensor Flag Locations Along the Paper Path Figure 7-16 PS31 Tray 4, Transfer Door Re gistration Pho tsensor PS32 Tray 4, Transfer Door Pape r Jam Photosensor PS2 Paper Input Unit Pape r Jam Photosensor PS1 Registration As sembly Photosensor PS1403 Fusing Exit Photosens or PS1402 Face Down Delive ry Paper Jam Photosensor. PS Entry Flipper Assembly o[...]

General Paper Path T roubleshooting Paper jams occur in the printer when paper does not either reach or clear a photosensor along the printer’s paper path in a specific amount of time. If a paper jam occurs, a " 13.xx PAPER JAM " message is displayed on the printer’s Control Panel. The following lists general questions you should ask [...]

Message Error Log Category/ Message Description Recommended Action 13.0 P APER JAM CLEAR PRINTER Attendance Required Paper is j ammed somewhere in the paper path, or a sensor flag may be stuck, caus ing a false paper jam warning. The jam was detected immediatel y after a power cycle. See Figure 7-13 for sensor fl ag locations. Refer to the General [...]

Message Error Log Category/ Message Description Recommended Action 13.x P APER JAM (Continued) 13.0 13.1 13.2 13.3 13.4 13.5 13.6 13.0n.00 13.0n.01 13.0n.02 13.0n.03 13.0n.04 13.0n.05 13.0n.06 Printer Engine Specific Paper Jams 0 = Non Specific paper jam. 1 = P APER FEED 1 P APER LA TE JAM (Paper late arriving at PS2) 2 = P APER FEED 2 P APER LA TE[...]

Message Error Log Category/ Message Description Recommended Action 13.x P APER JAM (Continued) 13.7 13.8 13.9 13.9n 13.10 13.0n.07 13.0n.08 13.0n.09 13.0n.10 Duplex Module Paper Jams 7 = 2-SIDED TURNAROUND P APER LA TE JAM 8 = 2-SIDED TURNAROUND P APER ST OPPED JAM 9 = 2-SIDED P A TH P APER LA TE JAM 10 = 2-SIDED P A TH P APER STOPPED JAM Paper Jam[...]

Message Error Log Category/ Message Description Recommended Action 13.x P APER JAM (Continued) 13.13 13.14 13.10.03 through 13.13.03 Stapler Assembly Err ors 13 = FUSER ACCORDION JAM 14 = PRINTER COULD NOT AUT O EJECT P APER This group of errors are related to the third device on in the C-Link daisy chain (s ee Figure 7-6); in the supported configu[...]

Message Error Log Category/ Message Description Recommended Action 13.1 1 P APER JAM Error Message 13.27.1 1 A paper jam occurred at the V ertical T ransfer Assembly . Paper did not reach exit sens or (PS32) on time (see Figure 7-14). See all recommendations listed for Error Log Message 13.17.1 1, and follow these s teps: Check the brass washer on [...]

Flipper Assembly a nd Paper Sensor Flags (Multi- Bin Mailbox) 1. PS Face Up 2. PS Face Up Full 3. PS Entry Se nsor Paper Sensor Exit 1. PSExit1 - Detect s paper entering he ad assembly. 2. PSExit2 - Detect s paper exiting head as sembly. Figure 7-17 Figure 7-18 7 Troubleshooting Troubleshooting 7-43[...]

Message Error Log Category/ Message Description Recommended Action 13.1 1 P APER JAM Error Message 13.59.1 1 A paper jam occurred at V ertical T ransfer Assembly exit or after openi ng the V ertical T ransfer Assembly . Paper in PS32 (see Figure 7-14) at power-on (flush routi ne not implemented at power-on). If Error Log Message 13.59.1y is followe[...]

Mailbox Motor and Encoder Disk (callout 1) Stapler Unit 1. Offset Pushe r 2. Exit Flap 3. Registrat ion Pusher 4. Slider Arms Figure 7-19 Figure 7-20 7 Troubleshooting Troubleshooting 7-45[...]

Message Error Log Category/ Message Description Recommended Action 13.12 P APER JAM Error Message 13.03.32 A paper jam occurred along the T ransport Belt. When the paper ’ s final destinati on is either the stapler or one of the mai lboxes, paper moves from the Flipper As sembly to the T ransport Belt. Magnetic attraction holds the paper between [...]

Message Error Log Category/ Message Description Recommended Action 13.12 P APER JAM Error Message 13.07.72 A paper jam occurred in the input guide. The input guide is l ocated at theentry and accepts paper from the printer . It guides the paper into the Flipper Assembly on the Mul ti-Bin Mailbox (refer to Figure 7-17). PSEntry in the Flipper Assemb[...]

Message Error Log Category/ Message Description Recommended Action 13.12 P APER JAM Error Message 13.12.03 A slider jam occurred. The slider arms are stuck or something i s interfering with thei r movement (refer to Figure 7-20). T wo slider arms hold the rear edge of the paper stac k in position during the stapl ing proc es s. The sliders help rem[...]

Message Error Log Category/ Message Description Recommended Action 21 PRINT OVERRUN DA T A LOST Error Message The data (dense tex t, rules, raster or vector graphics) sent to the printer was too complex. Press [Select] to resume printing. If AUT O CONTINUE=ON, the printer will stop pri nting, display the error for 10 seconds, then clear the error ,[...]

Message Error Log Category/ Message Description Recommended Action 31.1.1 DISK NOT INITIALIZED Error Message 31.01.01 An optional disk ac cessory is not properly initialized. If the proper ini tialization command is sent to the di sk, the message may be removed. Press [Select] to continue. Refer to the Windows J etAdmin Utility or Mac intosh LaserJ[...]

Message Error Log Category/ Message Description Recommended Action 51.x ERROR CYCLE POWER Service Message 51.01.00 A laser subsystem probl em exists. x = 1: Beam detect mal function x = 2: Laser mal function Press [Select] to resume operation. NOTE: If the printer is set to AUT O CONTINUE=ON, the printer will automatical ly continue printing when t[...]

Message Error Log Category/ Message Description Recommended Action 55.xx ERROR PRESS SELECT KEY Service Message 55.xx.00 A printer command error occurred, which indicates a problem between the Formatter PCA and the print engine. xx = error code: 01 =Unable to bring up the engi ne 02 =Excessive noise gl itches on the Printer Ready signal (PPRDY) 03 [...]

Message Error Log Category/ Message Description Recommended Action 58.x PRINTER ERROR CYCLE POWER Service Message 58.01.00 58.02.00 58.03.00 58.04.00 The tray lifter malfunctioned. The tray lifter mechanisms l ift the paper stack in eac h tray until the paper is l ocated directly beneath the feed rollers. T o watc h T ray 3 lift, remove T ray 2 and[...]

Message Error Log Category/ Message Description Recommended Action 62.x PRINTER ERROR CYCLE POWER Service Message 62.0x.00 The printer encountered a problem when accessing an internal memory (CRC error). x = device 0 = Formatter 1-4 = SIMM Module Cycle power . If the message persists, veri fy that the SIMM module is installed correc tl y . T urn of[...]

Message Error Log Category/ Message Description Recommended Action 66.1.1 DEVICE ERROR CYCLE POWER Service Message 66.01.01 Feed Motor malfunction. The 2000-Sheet Input Feeder Main Drive Motor provides all "drive" capabilities for feedi ng paper in T ray 4. T o see if the 2000-Sheet Main Motor is functi oning, open the vertical transfer d[...]

Message Error Log Category/ Message Description Recommended Action 66.2.1 DEVICE ERROR CYCLE POWER Service Message 66.02.01 Home reference is not found. Duri ng the power-on sequence, the Multi -Bin Mailbox and the delivery head travel the length of the mailbox veri fying that all the bins and the stapler are installed. This is performed when the P[...]

Delivery Head Exit Roller 1. Exit Roller. 2. Guide Fingers. Multi-Bin M a ilbox Figure 7-21 Figure 7-22 7 Troubleshooting Troubleshooting 7-57[...]

Message Error Log Category/ Message Description Recommended Action 66.2.3 DEVICE ERROR CYCLE POWER Error Message 66.02.03 Delivery Head rollers are not sliding. One or more fingers on the delivery roller mechanism in the mai lbox’ s Delivery Head Assembly is out of position. NOTE: Power of f the printer . Position the mailbox away from the pri nt[...]

Message Error Log Category/ Message Description Recommended Action 66.2.14 DEVICE ERROR CYCLE POWER Error Message 66.02.14 Multi-Bin Mailbox C-Link is not responding. Cy cle power . Print the PCL configuration pages . Note which installed devices are NOT present on the configuration pages (refer to Figure 7-5). V erify that the C-Link Cables are in[...]

Tray 4 Cavity 1. Paper Quantity Swit ches 2. Lifter Safety Swit ch (SW31) 3. Paper Surface Sens or Flag (SW34) 4. Tray 4 Paper Out Flag (SW33) Tray 4 Lift Cables Figure 7-23 Figure 7-24 7-60 Troubleshooting[...]

Message Error Log Category/ Message Description Recommended Action 68 NVRAM FULL CHECK CONFIGURA TION Service Message The non-vol atile memory (NVRAM) is full. Press [Select] . The printer will go of fline. Remove MIO card and perform a COLD RESET . The printer display s the message REST ORING F ACTOR Y SETTINGS. When the initializati on is complet[...]

Message Error Log Category/ Message Description Recommended Action 79 SER VICE (xxxx) CALL SER VICE Catastrophic System Message An unrecoverable fi rmware error occurred. The numbers (xxxx) followi ng the error indicate the specifi c error . Record the error message including the number i n parentheses (XXXX), then press SELECT . W rite down any me[...]

Image Formation T roubleshooting Check the T oner Cartridge Image formation defects are often the result of toner cartridge problems. If there is any doubt, always replace the toner cartridge before troubleshooting image defects. Use the following check list to ensure that the toner cartridge is still operable. • Inspect the toner cartridge for r[...]

Image Quality T ables Possible Cause Recommended Action OCCASIONAL BLANK P AGES: 1. Software Configuration. Make sure the application software is not sending incorrec t page length requests, or extra page eject commands . 2. Network Configuration. Some s haring devices on networks may generate a blank page as a separator . Check with the network ad[...]

Possible Cause Recommended Action 1. Defective toner cartri dge. Replace the toner cartridge. 2. Light is l eaking into the printer . Ensure all covers are in place. 3. High voltage c ontact springs are di rty or defective. The high vol tage contacts are mounted on the High V oltage Power Supply PCA and protrude into the toner cartridge cavi ty . I[...]

Possible Cause Recommended Action 1. T oner supply is low . Shake the cartridge gently to redi stribute the toner , or replace the cartridge. 2. Print Density i s set incorrec tly . Change to a darker setti ng and retry printing. 3. EconoMode is on. Ec onoMode saves toner by reducing the dot density . This may appear to be a print quality problem i[...]

Possible Cause Recommended Action 1. Single sheet of paper defec tive. T ry reprinting the job. 2. Paper does not meet specs. The paper moisture content, conduc tivity , or surface finish may not work correc tly with the electrophotographic proc ess. T ry a dif ferent paper lot (see HP LaserJet Printer Family Paper Specific ations Guide ). 3. DC Co[...]

Possible Cause Recommended Action 1. Paper does not meet specs. The moisture content, conductivity , or surface finish of the media being printed may not work correctly with the electrophotographic process. T ry a dif ferent paper lot or other media (see HP LaserJet Printer Fami ly Paper Specificati ons Guide ). 2. Dirty Fusing Rollers. T oner buil[...]

Possible Cause Recommended Action 1. T oner cartridge is damaged. If the defect repeats at any of the followi ng intervals and i n the direction of paper mov ement, it is assoc iated with a component ins ide the toner cartridge. See note below . Printed side defec ts T oner cartridge drum, 94mm (3 3/4 inc hes) Developing rol ler , 51mm (2 inches) B[...]

Possible Cause Recommended Action 1. Paper surface too rough. T oner migrates to low spots, leav ing higher areas void. T urn EconoMode OFF . Use paper with correc t finish (smoothnes s) (see HP LaserJet Printer Family Paper Specific ations Guide ). 2. Printing on wrong side of paper . The label on the ream of paper indicates which side to print on[...]

Possible Cause Recommended Action 1. Paper is loaded i ncorrectly . If the paper is not installed flus h into the paper tray , a skewing problem will resul t. Remove paper from the tray and ins tall paper correctly . Position the paper guide correctly for the paper size being used. 2. Bad Paper Lot. Paper that is manufactured poorly or incons isten[...]

Possible Cause Recommended Action 1. Page too complex. The printer can not create the image fast enough to keep pac e with the print engine. Set Page Protect to ON or AUT O. 2. Not enough memory . The page is too complex for standard printer memory . Add printer memory . As an alternative, simplify the print job. 3. Printing on legal-size paper fro[...]

Figure 7-25 Repetitive Defect Ruler 7 Troubleshooting 7-73[...]

Image System T roubleshooting Half Self Test Functional Check The electrophotographic process can be subdivided into the following stages: • Cleaning (removing excess toner from drum sur face) • Conditioning (placing a uniform electrical char ge on drum) • Writing (laser strikes surfac e of drum to create latent image) • Development (format[...]

Drum Rotation Functional Check The photosensitive drum, located in the toner cartridge, must rotate for the print process to work. The photosens itive drum receives its drive from the Main Drive assembly. To verify whether the drum is rotating: 1 Open the top cover. 2 Remove the toner cartridge. 3 Mark the cartridge’s drive gear with a felt-tippe[...]

High-Voltage Power Supply Check The High-Voltage Power Supply PCA provides the necessary voltages for the electrophotographic processes. A method for ver ifying the high-voltage system is given below: Toner cartridge connection points Visually inspect the four connection points on the inside right end of the toner cartridge. If they are dirty or co[...]

T roubleshooting Checks Paper Jams Paper jams occur most often when: • Paper trays are not correctly loaded. Make sur e the paper is loaded with the arrow pointing UP in Tray 1, and DOWN in Trays 2, 3, and 4. • The print media does not meet the specifications listed in the HP LaserJet Printer Family Paper Specifications Guide . • The media is[...]

Figure 7-27 shows the possible locations for most of the paper jams. Paper Path Jam Locations 1. T oner cartridge area 6. Front Door 2. T ray 1 pick-up roller and feed area 7. T ray 2 and T ray 3 3. Right door 8. Fusing Assembly Area 4. T ray 4 transfer door 9. Left door 5. T ray 4 (2000-Sheet Input Unit) 10. Multi-Bin Mailb ox 11. Mailbox with Sta[...]

Clearing Paper Jams Note: Open and close all printer covers to clear the paper jam message. After removing a sheet of paper, you may need to check other areas to ensure that all paper has been removed. Whenever a sheet of jammed paper becomes badly shredded, it is a good idea to carefully piece all parts together to be sure you haven’t overlooked[...]

General T roubleshooting Information Miscellaneous Problems and Solutions The following lists symtoms and typical solutions to those problems. Abnormal noises are evident; grinding or chattering when main motor energized . From EP Area: 1 Replace Toner Cartridge. 2 Replace Main Gear Assembly. From Tray 2 or 3: 1 Verify proper paper loading, accepta[...]

Excessive Image Skew 1 Remove and reseat paper fences (fr ont fence in paper trays). 2 Image Skew Specifications: • 1 mm over 260 mm length • First line to leading edge 5.0 +/- 2.5 mm • Text Stretching 1% simplex 1.5% duplex • Envelope Skew 6.0 over 260 mm length • First line to leading edge/ left margin .....15 +/- 4.5 mm Loses Page Coun[...]

Print Voids on pages after coming out of POWER SAVE mode. Turn POWER SAVE off (POWER SAVE is an item under the CONFIGURATION MENU) and retry. Jams when printing envelopes, transparencies, or labels to MultiBin Mailbox or Stapler . MultiBin Mailbox does not support these media. Direct these media to the Left Output Bin (top bin of MailBox). Stops pr[...]

Wrinkling Envelopes 1 Place Fusing Levers in UP position and retr y envelopes. 2 Try new media. Verify Envelopes are within specifications. See LaserJet Family Paper Specifications Guide . Poor Fusing 1 Verify Fusing Levers are in the down position for cut sheet paper. 2 Verify DC Controller is Revision 2.6 or greater. IC 201 in the middle of the D[...]

If the paper path test works, it may be a software or user related issue. Perform the following steps: 1 Define the media types which are loaded in each paper tray. This can be done from either JetAdmin or the front c ontrol panel of the printer. From JetAdmin • Select the Trays tab. • Select the correct media type for each tray listed. • Cli[...]

Caution Do not make changes to the driver unless the application does not provide this option. Print job settings selected through your application always override settings made through theprinter driver. Printer settings made in the application or print driver always override the c orresponding setting made on the printer Control Panel. 6 Print th[...]

Diagrams This section contains the following diagrams: • Printer Sensors and Switches • Printer Motor, Clutches, and Solenoids • DC Controller Inputs and Outputs (5 sheets) • Main Wiring Diagram (1 sheet, fold-out) • 2000-Sheet Input Unit Controller PCA Inputs • 2000-Sheet Input Unit Controller PCA Outputs • 2000-Sheet Input Unit Main[...]

Figure 7-28 Printer Sensors and Switches (Print Engine Only) 7 Troubleshooting Troubleshooting 7-87[...]

Figure 7-29 Printer Motor, Clutches, and Sol enoids 7-88 Troubleshooting[...]

Figure 7-30 DC Controller Inputs and Output s (1 of 5) 7 Troubleshooting Troubleshooting 7-89[...]

Figure 7-31 DC Controller Inputs and Output s (2 of 5) 7-90 Troubleshooting[...]

Figure 7-32 DC Controller Inputs and Output s (3 of 5) 7 Troubleshooting Troubleshooting 7-91[...]

Figure 7-33 DC Controller Inputs and Output s (4 of 5) 7-92 Troubleshooting[...]

Figure 7-34 DC Controller Inputs and Output s (5 of 5) 7 Troubleshooting Troubleshooting 7-93[...]

Figure 7-35 Printer Main Wiri ng Diagram 7-94 Troubleshooting[...]

Figure 7-36 2000-Sheet Input Unit Controller PCA Inputs 7 Troubleshooting Troubleshooting 7-95[...]

Figure 7-37 2000-Sheet Input Unit Controller PCA Outputs 7-96 Troubleshooting[...]

Figure 7-38 2000-Sheet Input Unit Main Wiring Diagram 7 Troubleshooting Troubleshooting 7-97[...]

1 2 3 4 5 6 7 8 9 10 Vcc Vcc Vcc 1 2 3 1 2 3 4 1 2 1 2 3 4 5 1 7 1 6 1 5 1 4 1 3 1 2 1 1 1 0 98765432 1 previous device connector (in) CLINK next device connector (out) CLINK power supply connector (one dot) (two dots) M5 Decoder M2 M1 M4 M3 Delivery Head Roller Motor Ejector Motor Delivery Head Position Motor Flipper Roller Motor Transport Belt Mo[...]

Figure 7-40 Stapling Unit Controll er PCA Main Wiring Diagram 7 Troubleshooting Troubleshooting 7-99[...]

7-100 Troubleshooting[...]

8 Parts and Diagrams Chapter Contents How to Use the Part Lists and Diagrams . . . . . . . . . . . . . . . . . 8-3 Ordering Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Accessories and Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Common Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Illus[...]

8-2 Parts and Diagrams[...]

How to Use the Part Lists and Diagrams The figures in this chapter illustrate the major subassemblies in the printer and their component parts. A table (material list) follows each exploded assembly diagram. Each table lists the reference des ignator (item number) for each part, the associated part number for the item, the quantity, and a descripti[...]

Accessories and Supplies The accessories, supplies, and parts listed in Chapter 1 and in the following pages are available through your local authorized HP dealer. To find a dealer near you (or if your dealer is temporarily out of stock), call the HP Customer Information Center (800) 752-0900 (U.S. Only). Note Refer to “Related Documentation” i[...]

Illustrations and Parts Lists The following illustrations and their assorted parts tables list the field replaceable components for this printer. Wher e applicable, the exchange part number is listed immediately following the original equipment part numbers. Appendix A provides two cross-reference tables of all the parts listed in this chapter: Tab[...]

Figure 8-1a LJ 5Si Family Printer and Paper Handling Components 8-6 Parts and Diagrams[...]

Figure 8-1b LJ 5Si Mopier Family and Paper Handling Components 8 Parts and Diagrams Parts and Diagrams 8-7[...]

Ref Description/Product Number Part Number Exchange /Service Number QTY 01 Formatter Assembly C3168-67905 01A Formatter Assembly , Exchange C3168-69005 (ex.) 01 Formatter Assembly , Heavy Media C3125-60001 (serv .) 02 PostScript SIMM/C3169A C3169-69001 (ex.) 03 420 MB Disk Drive/C2965A 1 03A 420 MB Disk Drive, Exchange C2965-69001 (ex.) not shown 4[...]

Ref Description/Product Number Part Number Exchange /Service Number QTY not shown C-Link Cable Assembly 178 cm (HCI to MBM) C3764-70000 not shown C-Link Cable Assembly 61 cm (Engine to HCI) C3763-70000 not shown C-Link Cable Assembl y 97 cm (MBM to Stapler) C3766-60512 not shown Stapler Cartridges (3-pack)/C3772A not shown 3 W ay Power Adapter C407[...]

Figure 8-2 Printer Covers and Doors 8-10 Parts and Diagrams[...]

Ref Description Part Number QTY 01 Left Access Door RB1-6667-000CN 1 02 Left Access Door Struts RF5-1440-000CN 2 03 Hinge Pl ate RB1-6507-000CN 1 04 Label, Operati on (Special Order) RS5-8596-000CN 1 05 Cover As sembly RG5-1870-000CN 1 07 Right Cover As sembly RG5-1915-040CN 1 07D Open / Close Stopper RB1-6484-000CN 1 08 Front Cover RB1-6494-000CN [...]

Figure 8-3 Printer Internal Components (1 of 4) 8-12 Parts and Diagrams[...]

Ref Description Part Number QTY 01 T ransfer Guide Bushi ng RB1-6441-000CN 2 02 T ransfer Guide RF5-1394-000CN 1 03 T ransfer Roller RF5-1412-000CN 1 05 Damper Holder (Front) RB1-6461-000CN 1 06 Damper Holder (Rear) RB1-6462-000CN 1 08 Clutc h Cover RB1-6468-000CN 1 10 Main Motor RH7-1260-000CN 1 15 Main Motor Cabl e RG5-1919-000CN 1 20 Face-Down D[...]

Figure 8-4 Printer Internal Components (2 of 4) 8-14 Parts and Diagrams[...]

Fig Ref Description Part Qty 8-04 A Di verter Assembly RG9-1150-000CN 8-04A 11 Diverter Drive Assembly RF5-1441-000CN 1 8-04A 16 20T Gear RS5-0758-000CN 1 8-04A 18 Conductive Bushing RS5-1 101-000CN 1 8-04A 20 T ension Spring RS5-2490-000CN 1 8-04B 11 Paper Sensing Lever RB1-6692-000CN 1 8-04B 12 Paper Height Lever RB1-6693-000CN 1 8-04B 25 Fan 4 R[...]

Figure 8-5 Printer Internal Components (3 of 4) 8-16 Parts and Diagrams[...]

* LaserJet 5Si HM (C3124A) only. Ref Description Part Number QTY 06 Laser / Scanner As sembly RG5-1895-000CN 1 06A Laser / Scanner Assembly , Exchange C3166-69006 16 Fan 1 RH7-1266-000CN 1 18 Cable As sembly RG5-1924-000CN 1 19 Scanner Motor Cable RG5-1925-000CN 1 20 BD Cable RG5-1926-000CN 1 21 ILS Cable RG5-1927- 000CN 1 30 Switc h / Sensor PCA R[...]

Figure 8-6 Printer Internal Components (4 of 4) 8-18 Parts and Diagrams[...]

Ref Description Part Number QTY 02 Fuser Cabl e 1 RG5-1849-000CN 1 03 Fuser Cabl e 2 RG5-1850-000CN 1 04A Low V oltage Power Supply , 1 10-120V RG5-1876-000CN 1 04B Low V oltage Power Supply , Universal RG5-1878-000CN 1 04C Low V oltage Power Supply , 1 10-120V , Exchange C3166-69007 1 04D Low V oltage Power Supply , Universal, Exchange C3166-69008[...]

Figure 8-7 2000-Sheet Input Unit Internal Components 8-20 Parts and Diagrams[...]

Ref Description Part Number QTY 01 2000-Sheet Input T ray Assembly RG5-2155-000CN 1 02 Front Cover RF5-1632-000CN 1 03 Right Cov er RB1-7832-000CN 1 04 Left Cover RB1-7833-000CN 1 05 Back Cov er RB1-7834-000CN 1 15 Cassette Si ze Plate RB1-6894-000CN 1 30 Cassette Si ze Labels RS5-861 1-000CN 1 31 Motor Cable RG5-2233-000CN 1 50 T ray 4 Main Drive [...]

Figure 8-8 2000-Sheet Input Unit Internal Components 8-22 Parts and Diagrams[...]

Ref Description Part Number QTY 01 Paper Deck PCA RG5-4198-000CN 1 02 Paper Sensor PCA RG5-2225-000CN 1 03 Paper Size PCA RG5-2226-000CN 1 04 Adjus tabl e T ip Feet RBI-7684-000CN 4 26 DC Power Supply Assembl y RG5-2281-000CN 1 27 Power Supply Fus e VD7-0643-151CN 1 28 PSU Cable RG5-2227-000CN 29 Main Cabl e RG5-2228-000CN 1 32 V olume Paper Cable [...]

Figure 8-9 Multi-Bin Mailbox/Mailbox with Stapler Components (1 of 3) 8-24 Parts and Diagrams[...]

Ref Description Part Number QTY 01 T op Cover C3764-60555 1 02 Spacer , plas tic C3764-60524 1 03 Right Cov er C3764-60553 1 04 Power Supply Assembly 0950-2927 1 05 Attachment Beam Assembly C3764-67906 1 06 Attachment Brac ket C3764-60560 1 07 Metallic Box C3764-60523 1 08 Multi -bin Mailbox Control ler PCA C3766-60535 1 09 Bin As sembly (8-pak) C3[...]

Figure 8-10 Multi-Bin Mailbox/Mailbox with Stapler Components (2 of 3) 8-26 Parts and Diagrams[...]

Ref Description Part Number QTY 01 Flipper Assembl y (no cable) C3764-60501 1 02 Mounting Shaft (Hex ) C3764-60516 1 03 Jam Acces s Door Assembly C3764-60514 1 04 Spring, l eft, jam access door C3764-60522 1 05 Metal T ape Holder C3764-60515 1 06 Spring, ri ght, jam access door C3764-60518 1 07 Mounting Shaft "e" Cl ip C3764-60517 2 08 Me[...]

ΗΕΩΛΕΤΤ Αβχδεφγ ονεδεαδ ονε ανγβλδκε ονε ανδβδελδ ονε ανδκφδβλ ονε ονεδκσλσ ονε ονεδκλλσλ ονε ονδεδσκσ πµν Figure 8-11 Multi-Bin Mailbox/Mailbox with Stapler Components (3 of 3) 8-28 Parts and Diagrams[...]

Ref Description Part Number QTY 01 Left Cover C3764-60554 1 02 Delivery Head Position Motor C3764-60507 1 03 Cable, Del ivery Head Position Motor to Controller PCA C3764-60547 1 04 Cable Hol der , Round Gasket C3764-60565 10 05 Cable, Interl ock Switch to Controller PCA C3764-60548 1 06 Cable Hol der , Edge C3764-60566 1 07 Cable Hol der , Flat C37[...]

 1 2  3 4     Figure 8-12 Stapling Unit Internal Components 8-30 Parts and Diagrams[...]

Ref Description Par t Number Qty Stapling Unit As sembly C3766-60500 1 Exchange Stapling Unit C3766-69500 1 1T op Cover Assembl y C3766-60501 1 2 Stapling Bed Assembl y C3766-60503 1 3 Stapling Unit Control PCA C3766-60504 1 4 Back Plate C3766-60505 1 5 Hinges, Set of C3766-60506 1 6 Wire Frame C3766-60507 1 7 Brushes C3766-60508 1 not shown Stapli[...]

8-32 Parts and Diagrams[...]

A Parts Index Parts Index A-1[...]

Alphabetical Parts Index Description Product/Part No. Fig. Ref. 2000-Sheet Input Unit (T ray 4) C3763A 8-01 07 2000-Sheet Input T ray Assembly RG5-2155-000CN 8-07 01 3 W ay Power Adapter C4077-60102 8-01 not shown 20T Gear RS5-0758-000CN 8-04A 16 420 MB Disk Cable As sembly C2965-60004 8-01 not shown 420 MB Disk Drive C2965A 8-01 03 420 MB Disk Dri[...]

Description Product/Part No. Fig. Ref. Cable Assembly RG5-1924-000CN 8-02 22 Cable Holder , Edge C3764-60566 8-11 06 Cable Holder , Flat C3764-60513 8-11 07 Cable Holder , Round Gasket C3764-60565 8-11 04 Cable, Delivery Head Pos ition Motor to Controller PCA C3764-60547 8-11 03 Cable, Encoder to Controller PCA C3764-60549 8-11 10 Cable, Flat, Deli[...]

Description Product/Part No. Fig. Ref. Diverter Assembly RG9-1 150-000CN 8-02 30 Diverter Drive Assembl y RF5-1441-000CN 8-04A 11 Duplex Unit C3762A 8-01 10 Duplex Unit, Heav y Media C4178-69001 8-01 10 Duplex Unit Rol ler 1 RB1-6822-000CN 8-01 11 Electromagnetic Cl utch RH7-51 19-000CN 8-03 24A Electromagnetic Clutc h ( Paper Feed) RH7-5120-000CN [...]

Description Product/Part No. Fig. Ref. Front Door Latch XZ9-0379-000CN 8-02 10 Front Panel ( Control Panel Di splay) RG5-2433-000CN 8-02 19 Fuse, L VPS, 1 10-120V VD5-0056-301CN 8-06 05 Fuse, L VPS, Universal VD7-0646-301CN 8-06 05A Fuser Assembly 1 10V , Exchange C3166-69001 8-04 C Fuser Cable 1 RG5-1849-000CN 8-06 02 Fuser Cable 2 RG5-1850-000CN [...]

Description Product/Part No. Fig. Ref. Laser / Scanner Assembl y RG5-1895-000CN 8-05 06 Laser / Scaner Assembl y , Exchange C3166-69006 8-05 06A Left Access Door RB1-6667-000CN 8-02 01 Left Access Door Struts RF5-1440-000CN 8-02 02 Left Cover RB1-7833-000CN 8-07 04 Left Cover C3764-60554 8-11 01 Lifter Sensing Switc h (SW31) RG5-2546-000CN 8-07 66 [...]

Description Product/Part No. Fig. Ref. Overlay , Swedish C3166-40007 not shown Overlay , Danish C3166-40008 not shown Overlay , Finnish C3166-40009 not shown Overlay , Dutch C3166-40010 not shown Overlay , Polish C3166-4001 1 not s hown Overlay , T urkish C3166-40012 not shown Overlay , Portugese C3166-40013 not shown Overlay , Japanese (Katakana) [...]

Description Product/Part No. Fig. Ref. Pickup Roller RF5-1427-000CN 8-04E 21 Pickup Roller RF5-1427-000CN 8-07 53 PIU PCA RG5-1860-000CN 8-04E 103 Plate Guard RB1-6522-000CN 8-02 25 Plate Shield RF5-1464-000CN 8-06 17 Postscript SIMM C3169A 8-01 02 Power Cord RH2-5236-000CN not shown Power Supply Assembl y 0950-2927 8-09 04 Power Supply Fuse VD7-06[...]

Description Product/Part No. Fig. Ref. Screw , TP , M3X6 (fixed shoulder) XA9-0267-000CN 8-03 CH101 Screw , TP , M3X6 (fixed shoulder) XA9-0267-000CN 8-05 CH101 Screw , TP , M3X6 (fixed shoulder) XA9-0267-000CN 8-06 CH101 Screw , TP , M3X6 (floating flat and lock washer) XA9-0547-000CN 8-02 CH102 Screw , TP , M3X6 (floating flat and lock washer) XA[...]

Description Product/Part No. Fig. Ref. T orque Limiter RB1-6588-000CN 8-04E 10 T orque Limiter RB1-6588-000CN 8-07 54 T ransfer Guide RF5-1394-000CN 8-03 02 T ransfer Guide Bushing RB1-6441-000CN 8-03 01 T ransfer Roller RF5-1412-000CN 8-03 03 T rans fer Roller Assembly RG5-1887-000CN 8-03 40 T ranspsort Belt Motor (in kit) C3764-67904 8-11 11 T ra[...]

Numerical Parts Index Part No. Descr iption Fig. Ref. 0950-2927 Power Supply Assembl y 8-09 04 C2009-00006 MIO Coverplate 8-01 14 C2930A T ray 3 8-01 09 C2931A T ray 2 8-01 08 C2965-40001 420 MB Disk Left Mounting Bracket 8-01 not shown C2965-40002 420 MB Disk Right Mounting Bracket 8-01 not shown C2965-60004 420 MB Disk Cable As sembly 8-01 not sh[...]

Part No. Descr iption Fig. Ref. C3764-60505 Face Up Bin 8-09 11 C3764-60507 Delivery Head Position Motor 8-11 02 C3764-60513 Cable Holder , Flat 8-11 07 C3764-60514 Jam Access Door As sembly 8-10 03 C3764-60515 Metal T ape Holder 8-10 05 C3764-60516 Mounting Shaft (Hex) 8-10 02 C3764-60517 Mounting Shaft "e" Clip 8-10 07 C3764-60518 Sprin[...]

Part No. Descr iption Fig. Ref. C3764-60564 Pulley , small 8-10 14 C3764-60565 Cable Holder , Round Gasket 8-11 04 C3764-60566 Cable Holder , Edge 8-11 06 C3764-67900 Kit, Metallic T ape/Housing 8-10 not shown C3764-67901 Kit, Hardware 8-10 not shown C3764-67902 Kit, Paper Guide 8-10 not shown C3764-67903 Kit, Flat Cable 8-10 not shown C3764-67904 [...]

Part No. Descr iption Fig. Ref. C3766-69500 Exchange Stapling Unit 8-12 not shown C3766-69500 Stapling Unit Exchange 8-09 12 C3766-69515 Exchange Mailbox: 5 Bin for Stapl er 8-01 12 C3766-69515 Exchange Mailbox: 5 Bin for Stapl er 8-09 not shown C3768-60501 External Paper Handling Controller PCA 8-01 04 C3774A Mailbox wi th Stapler 8-01 12 C3909A T[...]

Part No. Descr iption Fig. Ref. RB1-6558-000CN Sensor Arm Spring 8-04E 49 RB1-6588-000CN T orque Limiter 8-04E 10 RB1-6588-000CN T orque Limiter 8-07 54 RB1-6614-000CN Fuser Flag 8-04C 36 RB1-6615-000CN Fuser Lock Lever Right 8-04C 37 RB1-6616-000CN Fuser Lock Lever Left 8-04C 38 RB1-6667-000CN Left Access Door 8-02 01 RB1-6692-000CN Paper Sensing [...]

Part No. Descr iption Fig. Ref. RF5-1623-000CN Adjustable Size Pl ate: Front 8-07 69 RF5-1632-000CN Front Cover 8-07 02 RG5-1833-040CN Registration Assembl y 8-03 24 RG5-1834-000CN Feeder Assembly 8-03 23 RG5-1843-000CN Sensor Cable 8-04D 13 RG5-1844-050CN DC Controller PCA 8-05 32 RG5-1845-000CN Paper Size Sensing PCA, T rays 2 and 3 8-06 20 RG5-1[...]

Part No. Descr iption Fig. Ref. RG5-1924-000CN Cable Assembly 8-05 18 RG5-1925-000CN Scanner Motor Cable 8-05 19 RG5-1926-000CN BD Cable 8-05 20 RG5-1927- 000CN ILS Cable 8-05 21 RG5-1928-000CN Registration Cable 8-06 13 RG5-1928-000CN Connector , 3P 8-06 13B RG5-2155-000CN 2000-Sheet Input T ray Assembly 8-07 RG5-2164-030CN T ray 4 Main Drive Asse[...]

Part No. Descr iption Fig. Ref. RS5-1207-020CN Bushing, Plas tic 8-07 65 RS5-2463-000CN Compression Spring, Front 8-04D 14 RS5-2466-000CN Compression Spring, Rear 8-04D 16 RS5-2490-000CN T ension Spring 8-04A 20 RS5-2556-000CN Spring 8-07 63 RS5-8596-000CN Label, Operation (Special Order) 8-02 04 RS5-8605-000CN Paper Size Guide Label (T rays 2 and [...]

B I/O Information IEEE 1284 Parallel Cable Information The IEEE 1284 parallel interface is compatible with Centronics parallel interfaces. To take advantage of its enhanced capabilities such as bi-directional communication between the computer and printer, faster transmission of data, and auto configuration of printer drivers the customer must have[...]

Parallel Cable Pin Configuration For best results, use the C2951A cable, or equivalent. Caution Ensure that all power and interface cables on the pr inter and host computer are properly gr ounded in compliance with local codes. Parallel Cable Pin Assignments (C2951A) Figure B-1 B-2 I/O Information[...]

Connecting to LocalT alk Networks The printer does not come with a LocalTalk network cable. Use a standard LocalTalk network cable and connector kit, such as the HP LocalTalk Network Cable Kit, part number 92215N. You will need one connector kit for each printer on the network, and another for each Mac intosh computer on the network. Connecting to [...]

Connecting to the MIDDLE of a LocalT alk Network Connecting to the MIDDLE of a LocalTalk Network (1 of 2) 1 Disconnect the printer from its power sour ce. Insert the new connector box cable into the LocalTalk port of the printer. 2 Insert one end of the new cable into the connector box. 3 Place the other end of the new cable next to a connector box[...]

Connecting to a Network. The printer supports up to four different cables: IEEE 1284 parallel, (Figure B-5, callout 1), BNC (ThinLAN) (Figure B-5, callout 2), 10Base-T (RJ-45) (Figure B-5, callout 3), and DIN-8 (Loc alTalk) (Figure B-5, callout 4). Select the appropriate interface cable fr om those shown below for the system and connect the cable o[...]

DIN-8 (LocalTalk) Interface Plug the end of the DIN-8 cable into the LocalTalk port on the HP JetDirect card. Note If you are using only the LocalTalk port, 18 MIO NOT READY will appear every time you turn on the printer. This message will automatically disappear after 5 minutes. Optional Network Configuration. The following is for HP LaserJet 5Si [...]

Configuring Novell NetWare Frame Type Parameters. Normally selecting a NetWare frame type is not required. The HP JetDirect card automatically selects a NetWare frame type, and only when this selection is incorrect do you have to set the NetWare fr ame type through the HP LaserJet 5Si MX c ontrol panel. The NetWare fram e type is displayed on the s[...]

Configuring TCP/IP Parameters The HP JetAdmin utility for UNIX (sold separately) may be used to configure TCP/IP parameters. If you do not have the HP JetAdmin utility for UNIX, or you are using a UNIX system other than HP-UX, Solaris, or SunOS, you may use the control panel of the printer to configure thes e TCP/IP parameters manually: • Usage o[...]

Configuring Apple EtherTalk Phase Parameter To configure EtherTalk parameters: 1 If you do not want to configure the phase parameter, Press [On Line] . 2 Press [Item] . CFG ETALK=NO * appears. 3 Press [+] . CFG ETALK=YES appears. 4 Press [Select] . CFG ETALK=YES * appears. 5 Press [Item] . Phase=2 * appears. 6 Press [+] to change the phase paramete[...]

Disable Network Protocols (Optional). 1 Press [On Line] to take the printer offline. 2 Press [Menu] repeatedly until MIO MENU appears. 3 Press [Item] . CFG NETWORK=NO * appears. 4 Press [+] . CFG NETWORK=YES * appears. 5 Press [Select] . CFG NETWORK YES * appears. 6 Press [Item] to scroll through each network protocol. NOVELL=ON * appears. To Disab[...]

C Regulatory Information Laser Safety (U.S.A.) The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser pr oducts manufactured since August 1, 1976. Compliance is mandator y for products marketed in the United States. This printer is certified as a “Class 1” laser product u[...]

Laser Statement (Finland) The following applies to printer operation and servicing in Finland. LASERTURVALLISUUS LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT HP LaserJet(s) 5Si, 5S i MX, and 5Si Mopier laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käyt"ssä kirjoittimen suojakotelointi estää lasersäteen [...]

T oner Safety Note In case of toner spills, skin and clothing are best cleaned by removing as much toner as possible with a dry tissue, then washing with cold water. Hot water causes toner to permanently set into clothing. MSDS Information A Material Safety Data Sheet (MSDS) for toner or any other chemical us ed in the printer is available through [...]

FCC Regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide r easonable protection against harmful interferenc e in a residential installation. This equipment generates, uses, and can radiate radio frequency ener gy, and, [...]

DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer ’ s Name: Hewlett-Packard Company Manufacturer ’ s Address: 1 131 1 Chinden Boulevard Boise, Idaho 83714-1021, USA declares that the product Product Name: HP LaserJet 5Si//5Si MX* printers and 5Si Mopier* Model Number: C3166A / C3167A* / C4076A* / C4077A* Product [...]

C-6 Regulatory Information[...]

Index ! 2000-sheet input unit components 5-23 operation 5-26 see "tray 4 " 6-67 A ac access cover 6-19 ac power distrib ution 5-6 accessories user installa ble 6-7 accessories and options 1-17 acoustic emissions 1-10 adding memory 6 -7 personalities 6-7 adhesive labels 1-12 anti-static wrist wrap 6-7 B back cover 6-20 black lines 7-67 bla[...]

FIRST) 1-25 features 1- 3 control panel 1-3 feed roller tray 1 6-58 tray 2 6-60 tray 3 6-60 feeder assembly 6-37 fonts internal 1-3 formatte r assembly 6-39 formatte r system 5-8 front cover 6-21 functional block diagram 5-4 functional over view 5-1 - 5-42 fusing assembly 6-41 G guidelines media sele ction 1-1 1 H half self test functional check 7-[...]

overhead transparency specifications 1-12 overvoltage protection 5-6 P page count setting 3-21, 6-4 0 verification 3-19 page usage, monthly 1-3 paper capacities 1-4 paper curl 7-85 paper input unit sensor 6- 61 paper input unit (PIU) 6-47 paper jam detection 5- 40 paper jams 7-77 paper motion monitoring and control 5-10 paper paths 2000-sheet input[...]

rollers tray 1 6-58 tray 2 6-60 tray 3 6-60 S saving menu selections 3-8 scanner drive 5-10 scanner motor 5-1 1 scanner/laser assembly 6-42 screwd rivers 6-6 screws descriptions 6-16 Select, ke y 3-3 senso r paper input unit 6-61 registration 6 -62 separation pad tray 1 6-58 separation ro ller tray 2 6-60 tray 3 6-60 serial number 1- 7 setting 3-21[...]

Copyright© 1997 Hewlett-P ackard Co. Printed in USA 7/97 Manual P art No. C4077-90960 HP LaserJet 5Si Family Printers Service Manual English HP LaserJet 5Si Family Printers Service Manual Printed on at least 50% T otal Recycled Fiber with at least 10% Post-Consumer Paper *C4077-90960* *C4077-90960* C4077-90960[...]