Humax L3040 Bedienungsanleitung

HUMAX USA, INC. Please contact us at: 866.Humax.USA (866.486.2987) Humax USA, Inc. 3601 West Garry Ave Santa Ana, CA 92704 www.humaxusa.com L3040 OWNER’S MANUAL[...]

2[...]

3 Important Safety Instructions W ARNING : DO NOT EXPOSE THIS DEVICE TO DRIPPING OR SPLASHING, OR PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THIS DEVICE. This symbol alerts you that important literature concerning operation and maintenance has been included with this device. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CO[...]

Important Safety Instructions 4 Important Safeguards for You and Your New Device Always be careful when using your LCD TV. To reduce the risk of fire, electric shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your LCD TV. 1. Read these instructions. 2. Keep these instructions 3. Heed all warni[...]

5 Important Safety Instructions 18. If an outside antenna or cable system is connected to the device, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the U.S. National Electrical Code, ANSI/NFPA 70 provides information with regard to proper grounding[...]

6 User Instructions Like all phosphor-based display devices and all TFT LCD Displays, LCD TV' s can be susceptible to phosphor burn under certain circumstances. Certain operating conditions, such as the continuous display of a static image over a prolonged period of time, can result in phosphor burn if proper precautions are not taken. To prot[...]

7 T able of Contents ST ART -UP ● Part Names and Functions ..............................8~9 ● Checking Parts ..................................................10 ● Battery Installation and Replacement ................10 CONNECTION ● Connecting VHF and UHF Antennas .................11 ● Connecting a Video/S-VHS ...........................[...]

FRONT VIEW Part Names and Functions 8 POWER/LED IR Receiver SPEAKER Menu : Displays the On screen Display (OSD). Source : Displays an available video source (i.e. RGB, DVI, Video, S-Video, TV, Component1 and Component2). Also functions as the Select button in the On screen Display (OSD). Volume Up and Down : Volume Up and Down : Adjusts the volume.[...]

REAR VIEW 9 Part Names and Functions VHF/UHF For connecting outdoor Antenna RS-232C This terminal is used when control functions need to be operated externally by PC. DVI Input a digital video signal (TMDS/HDCP) from your PC or DTV receiver. RGB(D-sub 15pin) Input an analog RGB signal from your PC. Audio(PC/DTV) Input an audio signal from your PC o[...]

Battery Installation and Replacement 10 Checking Parts Insert four AAA batteries. Make sure to insert them with the proper polarity. Press and open the cover. 1 Align the batteries according to the (+) and (-) as indicated inside the case. 2 Close the cover. 3 Checking parts User’s Manual Remote Control Batteries(AAA) Power Cord Warranty Card[...]

11 Connection Connecting VHF and UHF Antennas Connecting an Outdoor Antenna For the best reception, we recommend you use an outdoor antenna. Severely weathered antennas and antenna cables can reduce the signal quality. Before making any connections, inspect all antenna hardware; any service center can explain the various outdoor antennas available [...]

12 1. Connect video cable(not supplied) to the VIDEO INPUT jack on the LCD TV and the video output jack on the external equipments.(VCR/Cable box, etc.,) 2. Connect audio cables(not supplied) to the AUDIO INPUT(L, R) jack on the LCD TV and the audio output jack on the external equipments.(VCR/Cable box, etc.,) To Play VCR / Cable box : 1. Turn on y[...]

13 Connecting a DTV Receiver (Component Video) 1. Connect video cables(not supplied) to the Y, Cb/Pb, Cr/Pr input jacks (Component 1 or 2) on the LCD TV and the video output jacks on the digital Set-Top Box. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks (Component 1 or 2) on the LCD TV and the output jacks on the digital Set-Top Bo[...]

14 Connecting a DTV receiver( DVI ) 1. Connect a DVI cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI with HDCP OUTPUT jack on the digital Set-Top Box. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jacks on the digital Set-Top Box. To W atch DTV : 1. Turn on the your Digital Set-[...]

15 Connecting a PC ( DVI ) 1. Connect a DVI 29pin cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. NOTE : When you connect a DVI, Please note the Analog input is not supported. To watch the PC sc[...]

16 1. Connect a PC cable, D-sub 15pin(not supplied) to the ANALOG PC INPUT jack on the LCD TV and RGB output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. To watch the PC screen : 1. Turn on LCD TV and press the SOURCE button to select the RGB. 2. Turn on PC and check f[...]

17 Remote Control Buttons POWER : Switches Power ON/OFF. SOURCE : Press this button to select a video source from among Video, S- Video, Component1, Component2, RGB and DVI. MUTE : Mutes the sound. S-SWAP : Exchanges main sound with sub- sound. SELECT : Press this button to select a menu item or to enter the sub-menu. JOYSTICK : Adjust, Move. Use t[...]

18 LCD Window Feature LCD window feature Select when you want to control a product other than this LCD TV. Select when you want to know the code for this remote control. Select when you want to set the fixed button. Indicates that the button you pressed is not operating. Indicates that the button pressed is operating. Indicates that the battery is [...]

19 Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the product you want to control (TV, VCR, DVD, CBL, SAT). Note that you[...]

20 Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the product you want to control (TV, VCR, DVD, CBL, SAT). Note that you[...]

21 Confirming the MBR Code in Y our Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). Using the buttons, move to the CODE icon and press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the product you want to confirm (TV, VCR, DVD, CBL, SAT[...]

22 PUNCH Buttons How to Set Up the Fixed Buttons - PUNCH Buttons T ypes of PUNCH Button. TV : VOLUME ( ) , MUTE If you select the TV PUNCH, these buttons are operated only on the TV. VCR If you select the VCR PUNCH, these buttons are operated only on the VCR. DVD If you select the DVD PUNCH, these buttons are operated only on the DVD. DEL Cancel th[...]

23 How to Reset the Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Press the SEL button. The - - - sign will appear in the product indication window. Input the reset code &q[...]

24 Basic operation Connect the Power Cord to the AC input on the back of your LCD TV. Insert the Plug for the LCD TV into a nearby electrical outlet.  The standby indicator lights up on the front panel. Press the POWER ( ) button on the remote control.  The LED lamp will change to light off and your LCD TV will be turned on. To switch your LC[...]

25 Basic operation With the OSD, press the INFO button on the remote control.  The LCD TV will display the external source, Picture Mode, Aspect Ratio, Clock and Video type. 1 Displaying Status Information Selecting your Language After adjustment: Press the MENU button to exit. When the LCD TV is initially powered ON, you must select the languag[...]

26 Channel Press the MENU button. Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button to select Channel Mode . Press the or button to select the option ( TV or CATV ). Press the or button to select Auto Program ; then press the SEL ( ) or button.  The LCD TV will begin memorizing all of the available channels. ?[...]

27 Channel After adjustment: Press the MENU button to exit. Using the LNA(Low Noise Amplifier) Press the MENU button. Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button. Press the or button to select to the LNA . Press the or button to select On or Off . 1 2 If the LCD TV is operating in a weak-signal area, sometim[...]

28 Direct Access Features Using the F A V button to select the previous channel Press the FAV button on the remote control.  The LCD TV will switch to the last viewed channel. 1 1 Press the VOL+ or VOL- button to increase or decrease the Volume on the remote control. Adjusting the V olume 50 Switching the Sound Off T emporarily You can temporari[...]

29 Direct Access Features Press the SOURCE button on the remote control. Press the or button to select signal source, then press the SEL ( ) button. 1 2 Selecting a Device from External Sources Source Video Connected TV TV Component2 Move Select Exit Connected Component1 Connected S-Video Not Connected RGB Not Connected DVI Not Connected You can se[...]

30 Picture Press the MENU button. Press the or button to select the PICTURE ( ) icon; then press the SEL ( ) or button. Press the or button to select Standard , Dynamic , Mild , or Custom picture setting. 1 2 3 Changing the Picture standard With Picture menu selected, press the or button to select an option ( Contrast , Brightness , Sharpness , Col[...]

31 Picture Press the MENU button. Press the or button to select the SOUND ( ) icon; then press the SEL ( ) or button. Press the or button to select Drama , Movie , Music , News , or Custom sound setting. 1 2 3 Changing the Sound Standard With Sound menu selected,press the or button to select an Equalizer ; then press the SEL ( ) or button.  The [...]

32 Sound 1 2 3 Setting the BBE Mode 4 Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Middle Mono Off Move Adjust Exit Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Mono Off Move Adjust Exit After adjustment: Press the MENU button to exit. After adjustment: Press [...]

33 Sound Selecting the Stereo Sound 1 2 3 4 Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Stereo Off Move Adjust Exit Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Mono Off Move Adjust Exit After adjustment: Press the MENU button to exit. Press the MENU butt[...]

34 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. With Aspect Ratio selected, press the or button to select the screen size you want. 1 2 3 Changing the Screen Size After adjustment: Press the MENU button to exit. Quick Way Press the ASPECT button on the remote control. Zoom2 Normal [...]

35 Setup 1 2 3 Protecting Screen burn(Long Life) 4 5 Displaying a still image on the LCD TV for more than several minutes can cause screen image retention. This image retention is also known as “screen burn”. The Long Life function reduces such image retention. Press the MENU button. Press the or button to select the Setup ( ) icon; then press [...]

36 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) button. Press the or button to select Time ; then press the SEL ( ) or button. With Clock selected, press the button to move to the AM/PM, hour or minute; then Press the or button to adjust item. Press the MENU button to set the setting. Press t[...]

37 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Sleep Timer. Press the or button to select the preset time interval for the LCD TV to stay on. The interval ranges from 5 to 120 minutes. 1 2 3 Setting the Sleep Timer 4 OK Setup Aspect Ratio Wide Long L[...]

38 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Reset . Press the or button to select OK or Cancel . 1 2 3 Factory Reset 4 Setup Aspect Ratio Wide Long Life Sleep Timer Pro. 120Min. Caption CCD1 V-CHIP Pro. Time Pro. Reset Cancel Move Select Exit Setu[...]

39 PIP(Picture In Picture) Press the MENU button. Press the or button to select the PIP ( ) icon; then press the SEL ( ) button. Press the or button to select On .  When the PIP is on, the Sub-menu is activated. Press the or button to select Type . Select a Type ( Small , Double1 , Double2 , or Large ) of the sub picture by pressing the or butto[...]

40 PIP(Picture In Picture) Main Picture TV CVBS DVD/480i DVD/480p DTV/480i DVD/480i DVD/480p DTV/480i RGB DVI TV CVBS DVD/ 480i DVD/ 480p DTV/ 480i DTV/480p, 720p, 1080i DVD/ 480i DVD/ 480p DTV/ 480i DTV/480p, 720p, 1080i RGB DVI Sub-Picture COMP 1 COMP 2 DTV/480p, 720p, 1080i DTV/480p, 720p, 1080i ■ Table1. Operating conditions of PIP COMP2 COMP[...]

41 OSD Press the MENU button. Press the or button to select the OSD ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Turn off Time . Press the or button to set up the time length of OSD display.  you can adjust time length from 3 to 59 seconds. 1 2 3 Setting the OSD Time Out 4 After adjustment: Press the MENU button to [...]

42 V -CHIP Operation The V-CHIP is a microprocessor control circuit that recognizes TV and Motion Picture Ratings. These ratings are contained in a special electronic identification signal that is part of many television programs and recorded videotapes. An on screen menu allows parents to set a secret 4-digit personalized key combination Password.[...]

43 V -CHIP Operation Press the MENU button. Press the or button, to select the Setup ( ) icon; then press the SEL ( ) or button. Use the or button to select V-CHIP. Press SEL ( ) or button. SETUP MENU V-CHIP MENU Enter the passwords you have chosen. For initial set-up, use the factory. As soon as you press the password, the BLOCKING menu appears on[...]

44 Press the or button to select the ratings which you wish to block. If you wish to select the MPAA menu, press the button. To change the selected rating, press the or button. (UNBLOCK BLOCK) RATING REMARKS G(general audience) All ages admitted. PG(Parental guidance suggested) Some material may not be suited for children. PG13(Parents strongly cau[...]

45 V -CHIP Operation This procedure allows parents to block programs that contains TV Parental Guide Ratings they consider inappropriate. Content labels are designed to indicate specific contents of TV programs within each TV Parental Guide Rating. For example, if a program rated TV-Y7 has strong Fantasy Violence content, the program will be labele[...]

46 TV-Y (All children) This rating is designed to be appropriate for all children. Whether animated or live action, the themes and elements in this program are specifically designed for a very young audience, including from 2~6. All content labels are blocked TV-Y7 (FV : Directed to older children) This program is designed for children age 7 and ab[...]

47 V -CHIP Operation TV-14 (D/L/S/V : Parental caution recommended) This rating contains some material that many parents would find unsuitable for children under 14 years of age. Parents are strongly urged to exercise great care in monitoring these programs, and are cautioned against letting children under the age of 14 watch unattended. TV-14 rate[...]

48 Display Settings How to Set Up Your Display Setting (for Windows) The Windows display settings for a typical computer are shown below. The actual screens on your PC, however, will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same basic[...]

49 Display Settings The LCD TV might operate abnormally if a non-standard video format is selected. The best resolution for this LCD TV is 1024X768 60Hz. This LCD TV provides plug and play capability. Dot x Line Vertical Horizontal DDC Protocol Frequency(Hz) Frequency(KHz) Support 640 X 350 70.086 31.469 EGA 85.080 37.861 640 X 400 85.080 37.861 72[...]

50 Picture Color Adjustment Press the MENU button. Press the or button to select the Picture ( ) icon; then press the SEL ( ) or button. Press the or button to select Custom Mode. Press the or button to select the item you wish to change. Press the or button to adjust the color. 1 2 3 Adjusting RGB Color 4 5 After adjustment: Press the MENU button [...]

51 Picture Position Adjustment Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the SEL ( ) or button to select Position ; then press the or buttons to adjust the position of the screen. 1 2 3 Changing the image position Frequency Adjustment Press the MENU button. Press the or button t[...]

52 Phase Adjustment Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Phase . Press the or button to remove picture noise on the screen. 1 2 3 Adjusting Phase 4 Automatic Quality Adjustment Press the MENU button. Press the or button to select the Setup ( ) icon;[...]

53 Serial Control Using RS-232C Serial Control Using RS-232C Cable (optional) Use RS-232C cable when you control the LCD TV using the PC. This function is called PC Remote Control and is the same as the physical Remote control. It will provide you an additional convenience when you use the LCD TV connected with a PC. (The RS-232C cable is not inclu[...]

54 Serial Control Using RS-232C Using the Hyper terminal At the connected Hyperterminal Window: File  Preference  Setup  ASCII Setup dialog window 1. Check the two items in the ASCII Sending section. 2. Check the first and third items in the ASCII receiving section. You have completed the preparations to communicate with the LCD TV using y[...]

55 Mode Command Remark Power pwr=0 power off pwr=1 power on Source inp=rf inp=vid inp=svd inp-rgb inp=yuv inp=vga inp=dvi Volume vol=12 Contrast con(rf)=24 Brightness bri(vid)+16 Range 0~31 Color col(vga)-10 Tint tin(rf)=? IR Spoofing sir=vup vup=volume up button sir=vdn vdn=volume down button sir=mnu mnu=menu button sir=aup aup=arrow up button sir[...]

56 T roubleshooting • Before you call a service technician, please review this list of problems and possible solutions. It may save you time and money. Problems Possible Solution No Power Make sure the power cord is connected to the AC outlet. Make sure the power cord is connected to a wall socket correctly. Poor or no picture Check all wire conn[...]

57 Specifications Design and specifications are subject to change without notice. Model Name L3040 Panel Size 30.0 inch Diagonal Display Size 29.53" (Diagonal) Type a-si TFT active matrix Pixel pitch 0.5025mm 0.1675mm RGB Viewing Angle 85 (H) / 85 (V) Frequency Horizontal 30 ~ 61 kHz Vertical 56 ~ 85 Hz Display Color 16.7 M colors Display Reso[...]

58 MANUFACTURER CODE ANAM 000 001 002 003 004 005 CROWN 076 DAEWOO 110 113 097 056 112 114 117 102 074 107 076 084 053 062 063 FUTURETECH 076 GE 057 058 073 106 LG(GOLDSTAR) 106 104 118 103 100 101 109 HITACHI 060 059 053 085 INKEL 115 JCP 051 058 JVC 075 089 KEC 076 KENWOOD 093 MARANTZ 051 MITSUBISHI 051 053 071 106 NEC 051 053 056 062 065 106 NIK[...]

59 MANUFACTURER CODE ANAM 000 001 002 003 004 005 AIWA 066 071 CANNON 060 063 065 DAEWOO 109 114 116 122 082 083 043 040 038 118 093 126 115 EMERSON 039 050 057 059 061 066 067 068 069 073 103 GE 063 065 LG(GOLDSTAR) 103 112 045 046 053 091 092 096 124 097 100 108 120 HITACHI 037 046 051 053 058 066 098 102 JVC 063 065 127 074 KENWOOD 047 MARANTZ 0[...]

MANUFACTURER CODE ANAM 000 001 002 APEN 015 025 HARMAN/KARDON 009 JVC 008 KENWOOD 023 LG 005 MEGAVOX 024 MITSUBISHI 019 ONKYO 024 PANASONIC 013 PIONEER 021 014 026 PROSCAN 020 RCA 020 SAMSUNG 004 017 SHERWOOD 016 004 SONY 022 TECHNICS 013 TOSHIBA 024 ZENITH 024 010 DVD MANUFACTURER CODE NOW 042 DONGGUK 040 SAEWOO 041 WOOYOUNGTECH 044 PACIFIC 039 LG[...]

61 How to Set Up the Lockout Function Function Remote Key Combination Lock/ Front Key lock on HELP +1 + 0 + 3 Unlock Front Key lock off HELP +1 + 0 + 2 Function Remote Key Combination Power Power on HELP +1 + 0 + 0 On/Off Power off HELP +1 + 0 + 1 Function Remote Key Combination Source TV HELP +2 + 0 + 0 On/Off Video HELP +2 + 0 + 1 S - Video HELP [...]

62 APPENDIX Care and Maintenance • With proper care, your LCD TV will give you many years of service. Please follow these guidelines to get the maximum performance from your LCD TV. Identifying Problems • Do not put the LCD TV near extremely hot, cold, humid, or dusty places. • Do not put the LCD TV near appliances that create magnetic fields[...]

63 Memo[...]

Memo 64[...]

KQF1T422Z3[...]