Intel GA-8I915MK-GV Bedienungsanleitung

GA-8I915MK-GV Intel ® Pentium ® 4 LGA775 Processor Motherboard User's Manual Rev. 1001 12ME-915MKGV -1001R * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipm[...]

Motherboard GA-8I915M K-G V Oct. 7, 2005 Oct. 7, 2005 Motherboard GA-8I915MK-GV[...]

Copyright © 2005 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any mean[...]

- 4 - T able of Contents GA-8I915MK-GV Motherboard Layout .......................................................................... 6 Block Diagram ................................................................................................................ 7 Chapter 1 Hardware Installation ......................................................[...]

- 5 - Chapter 3 Install Drivers ............................................................................................. 49 3 - 1 Install Chipset Drivers .................................................................................... 4 9 3 -2 Software Applications ...........................................................................[...]

- 6 - GA-8I915MK-GV Motherboard Layout KB_MS COMA LPT LGA775 CPU_FAN ATX FDD COMB SPDIF_IO CI PWR_LED PCI3 F_USB1 BIOS F_PANEL ICH6 F_USB2 BAT PCI2 CODEC SUR_CEN CLR_CMOS CD_IN SATA1 SATA0 PCI1 IDE1 PCIE_16 DDR1 DDR2 EP82562G AUX_IN VGA ATX_12V SYS _FAN IT8712 GA-8I915MK-GV F_AUDIO USB Intel 915GV LAN AUDIO USB[...]

- 7 - Block Diagram LGA775 Processor CPUCLK+/-(200/133MHz) VGA Host Interface PCI-ECLK (100MHz) PCI Express x4 Intel Intel 915GV GMCH Line-Out MIC Line-In SPDIF In SPDIF Out AC97 CODEC AC97 Link IT8712 LPT Port COM Ports Floppy PS/2 KB/Mouse 24MHz 33MHz 2 Serial A T A 8 USB Ports 3 PCI PCICLK (33MHz) PCI Bus 33MHz 14.318MHz 66MHz 48MHz GMCHCLK (200[...]

- 8 -[...]

Hardware Installation - 9 - English 1 - 1 Considerations Prior to Installation Preparing Y our Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1. Please turn off the compute[...]

GA-8I915MK-GV Motherboard - 1 0 - English CPU  Supports the latest Intel ® Pentium ® 4 LGA775 CPU  Supports 533/800MHz FSB  L2 cache varies with processors Chipset  Northbridge: Intel ® 915GV Express chipset  Southbridge: Intel ® ICH6  Supported on the Win 2000/XP operating systems Memory  2 DDR DIMM memory slots (supports [...]

Hardware Installation - 11 - English Hardware Monitor  System voltage detection  CPU temperature detection  CPU / System fan speed detection  CPU warning temperature  CPU / System fan failure warning  CPU smart fan control BIOS  Use of licensed AWARD BIOS  Supports Q-Flash Additional Features  Supports @BIOS  Supports [...]

GA-8I915MK-GV Motherboard - 1 2 - English 1-3 Installation of the CPU and Heatsink Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2 . Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert prope[...]

Hardware Installation - 13 - English 1-3-2 Installation of the Heatsink Fig.1 Please apply an even layer of heatsink paste on the surface of the installed CPU. The heatsink may adhere to the CPU as a result of hardening of the heatsink paste.T o prevent such an occurrence, it is suggested that either thermal tape rather than heat sink paste be used[...]

GA-8I915MK-GV Motherboard - 1 4 - English Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used. 2 . Before installing or removing memory modules, please make sure[...]

Hardware Installation - 15 - English 1 -5 Installation of Expansion Cards Y ou can install your expansion card by following the steps outlined below: 1 . Read the related expansion card's instruction document before installing the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the c[...]

GA-8I915MK-GV Motherboard - 1 6 - English 1 - 6 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector T o install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. Ser[...]

Hardware Installation - 17 - English 1 -7 Connectors Introduction 1) A TX_12V 2) A TX (Power Connector) 3 ) CPU_FAN 4 ) SYS_FAN 5 ) FDD 6 ) IDE1 7) SAT A0 / SA TA1 8 ) F_P ANEL 9 ) PWR_LED 1 0 ) F_AUDIO 1 1) CD_IN 1 2 ) AUX_IN 13 ) SPDIF_IO 1 4) SUR_CEN 15 ) F_USB1 / F_USB2 1 6 ) COMB 17) C I 1 8) CLR_CMOS 19) BAT 3 1 2 5 9 8 11 15 13 16 12 19 14 1[...]

GA-8I915MK-GV Motherboard - 1 8 - English 3 1 4 1/2) A TX_12V/A TX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector [...]

Hardware Installation - 19 - English 3/4) CPU_F AN / SYS_FAN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin (only for CPU_FAN) power connector and possesses a fool-proof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicat[...]

GA-8I915MK-GV Motherboard - 2 0 - English 6 ) IDE1 (IDE Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as[...]

Hardware Installation - 21 - English 8 ) F_P ANEL (Front Panel Connector) Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_P ANEL connector according to the pin assignments below . HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode(-) SPEAK (Speaker Connector) Pin 1:[...]

GA-8I915MK-GV Motherboard - 2 2 - English 1 0 ) F_AUDIO (Front Audio Panel Connector) Please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. T o find out if the chassis you are buying support front audio panel connector , please contact your dealer. If you want to use "Front Audio" connector, yo[...]

Hardware Installation - 23 - English 1 1 1 ) CD_IN (CD IN Connector) Connect CD-ROM or DVD-ROM audio out to the connector. Pin No. Definition 1 CD-L 2 GND 3 GND 4 CD-R 1 2 ) AUX_IN (AUX In Connector) Connect other device (such as PCI TV Tunner audio out) to the connector. 1 Pin No. Definition 1 AUX-L 2 GND 3 GND 4 AUX-R[...]

GA-8I915MK-GV Motherboard - 2 4 - English 1 3 ) SPDIF_IO (SPDIF In/ Out) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function. Use SPDIF IN feature only when your device has digital output func[...]

Hardware Installation - 25 - English 1 5 ) F_USB1 / F_USB2 (Front USB Connectors) Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional front USB cable,[...]

GA-8I915MK-GV Motherboard - 2 6 - English 1 7 ) CI (Chassis Intrusion, Case Open) This 2-pin connector allows your system to detect if the chassis cover is removed. Y ou can check the "Case Opened" status in BIOS Setup. 1 Pin No. Definition 1 GND 2 Signal 1 8 ) CLR_CMOS (Clear CMOS) Y ou may clear the CMOS data to its default values by th[...]

Hardware Installation - 27 - English 1 9 ) B A T (Battery) Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. If you want to erase CMOS... 1. Turn OFF the computer and unplug the power cord[...]

GA-8I915MK-GV Motherboard - 2 8 - English[...]

BIOS Setup - 29 - English BIOS (Basic Input and Output System) includes a CMOS SETUP utility which allows user to configure required settings or to activate certain system features. The CMOS SETUP saves the configuration in the CMOS SRAM of the motherboard. When the power is turned off, the battery on the motherboard supplies the necessary power to[...]

GA-8I915MK-GV Motherboard - 3 0 - English The Main Menu (For example: BIOS V er . : F1) Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu. If you can't find the setting you want, please press &[...]

BIOS Setup - 31 - English      Load Optimized Defaults Optimized Defaults indicates the value of the system parameters which the system would be in best performance configuration.      Set Supervisor Password Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.  [...]

GA-8I915MK-GV Motherboard - 3 2 - English IDE Channel 0 Master, Slave IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Device Setup. Y ou can use one of three methods: Auto Allows BIOS to automatically detect IDE devices during POST(default) None Select this if no IDE devices are used and the [...]

BIOS Setup - 33 - English Halt on The category determines whether the computer will stop if an error is detected during power up. No Errors The system boot will not stop for any error that may be detected and you will be prompted. All Errors Whenever the BIOS detects a non-fatal error the system will be stopped. All, But Keyboard The system boot wi[...]

GA-8I915MK-GV Motherboard - 3 4 - English 2-2 Advanced BIOS Features Hard Disk Boot Priority Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc. Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu. First / Second / Third Boot Devi[...]

BIOS Setup - 35 - English Password Check Setup The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) System The system will not boot and will not access to Setup page if the correct password is not entered at the prompt. If you want to cancel the setting of password, please just[...]

GA-8I915MK-GV Motherboard - 3 6 - English 2 -3 Integrated Peripherals On-Chip Primary PCI IDE Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. On-Chip SA T A Mode Disabled Disable this function. Auto BIOS will auto detect. (Default value) Combined Set On-Chip SA T A mode to Combined, you ca[...]

BIOS Setup - 37 - English USB 2.0 Controller Disable this function if you are not using onboard USB 2.0 feature. Enabled Enable USB 2.0 Controller. (Default value) Disabled Disable USB 2.0 Controller. USB Keyboard Support Enabled Enable USB Keyboard Support. Disabled Disable USB Keyboard Support. (Default value) USB Mouse Support Enabled Enable USB[...]

GA-8I915MK-GV Motherboard - 3 8 - English Parallel Port Mode SP P Using Parallel port as Standard Parallel Port. (Default value) EP P Using Parallel port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP & EPP mode. ECP Mode Use DMA 3 Set ECP Mode Use DMA to 3. (Default value) 1[...]

BIOS Setup - 39 - English PME Event Wake Up Disabled Disable this function. Enabled Enable PME Event W ake up. (Default value) Power On by Ring Disabled Disable Power on by Ring function. Enabled Enable Power on by Ring function. (Default value) Resume by Alarm Y ou can set "Resume by Alarm" item to enabled and key in Date/time to power o[...]

GA-8I915MK-GV Motherboard - 4 0 - English 2-5 PnP/PCI Configurations PCI 1 IRQ Assignment Auto Auto assign IRQ to PCI 1. (Default value) 3,4,5,7,9,10,1 1,12,14,15 Set IRQ 3,4,5,7,9,10,1 1,12,14,15 to PCI 1. PCI 2 IRQ Assignment Auto Auto assign IRQ to PCI 2. (Default value) 3,4,5,7,9,10,1 1,12,14,15 Set IRQ 3,4,5,7,9,10,1 1,12,14,15 to PCI 2. PCI 3[...]

BIOS Setup - 41 - English 2-6 PC Health Status Reset Case Open Status Disabled Don't reset case open status. (Default value) Enabled Clear case open status at next boot. Case Opened If the case is closed, "Case Opened" will show "No". If the case have been opened, "Case Opened" will show "Y es". If you w[...]

GA-8I915MK-GV Motherboard - 4 2 - English CPU Smart F AN Control Disabled Disable this function. Enabled When this function is enabled, CPU fan will run at different speed depending on CPU temperature. Users can adjust the fan speed with Easy Tune based on their requirements. (Default V alue) CPU Smart F AN Mode This option is available only when C[...]

BIOS Setup - 43 - English CPU Host Clock Control Please note that if your system is overclocked and cannot restart, please wait 20secs. for automatic system restart or clear the CMOS setup data and perform a safe restart. Disabled Disable CPU Host Clock Control. (Default value) Enabled Enable CPU Host Clock Control. CPU Host Frequency (Mhz) 100MHz [...]

GA-8I915MK-GV Motherboard - 4 4 - English FSB OverV oltage Control Normal Set FSB OverVoltage Control to Normal. (Default value) +0.1V Set FSB OverVoltage Control to +0.1V. +0.2V Set FSB OverVoltage Control to +0.2V. +0.3V Set FSB OverVoltage Control to +0.3V. CPU V oltage Control Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default valu[...]

BIOS Setup - 45 - English 2-8 Load Fail-Safe Defaults Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. CMOS Setup Utility-Copyright (C) 1984-2005 Award Software ` Standard CMOS Feature s ` Adva nced BIOS Features ` Integrated Peripherals ` Power M anage ment Setup ` PnP/PCI Confi[...]

GA-8I915MK-GV Motherboard - 4 6 - English 2-10 Set Supervisor/User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. T ype the password, up to eight characters, and press <Enter>. Y ou will be asked to confirm the password. Type the password again and pr[...]

BIOS Setup - 47 - English 2-1 1 Save & Exit Setup T ype "Y" will quit the Setup Utility and save the user setup value to RTC CMOS. T ype "N" will return to Setup Utility . 2-12 Exit Without Saving T ype "Y" will quit the Setup Utility without saving to RTC CMOS. T ype "N" will return to Setup Utility . CM[...]

GA-8I915MK-GV Motherboard - 4 8 - English[...]

Install Drivers - 49 - English Chapter 3 Install Drivers Pictures below are shown in Windows XP. Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the Run.ex[...]

GA-8I915MK-GV Motherboard - 50 - English 3-2 Software Applications This page displays all the tools that Gigabyte developed and some free software, you can choose anyone you want and press "install" to install them. 3-3 Driver CD Information This page lists the contents of software and drivers in this CD-title.[...]

Install Drivers - 51 - English 3-4 Hardware Information This page lists all device you have for this motherboard. 3-5 Contact Us Please see the last page for details.[...]

GA-8I915MK-GV Motherboard - 52 - English[...]

Appendix - 53 - English Chapter 4 Appendix 4-1 Unique Software Utilities M.I.T . (Motherboard Intelligent T weaker) Motherboard Intelligent T weaker (M.I.T .) allows user to access and change BIOS feature settings with relative speed and ease. Through GIGABYTE M.I.T . feature the user is no longer required to switch into different modes within BIOS[...]

GA-8I915MK-GV Motherboard - 5 4 - English 4-1-1 EasyT une 5 Introduction EasyT une 5 presents the most convenient Windows based system performance enhancement and manageability utility. Featuring several powerful yet easy to use tools such as 1) Overclocking for enhancing system performance, 2) C.I.A. and M.I.B. for special enhancement for CPU and [...]

Appendix - 55 - English 4-1-2 Xpress Recovery Introduction What is Xpress Recovery ? Xpress Recovery is a utility used to back up and restore an OS partition. If the hard drive is not working properly, the user can restore the drive to its original state. 1. Supports FA T16, F A T32, and NTFS formats 2. Must be connected to the IDE1 Master 3. Allow[...]

GA-8I915MK-GV Motherboard - 5 6 - English 2. Press F9 during powering on the computer. (T ext Mode) Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE T echnology CO. , Ltd. 1. Execute Backup Utility 2. Execute Restore Utility 3. Remove Backup Image 4. Set Password 5. Exit and Restart 1. If you have already entered Xpress Recovery by booting from t[...]

Appendix - 57 - English 1. Execute Backup Utility:      Press B to Backup your System or Esc to Exit The backup utility will automatically scan your system and back up data as a backup image in your hard drive. Not all systems support access to Xpress Recovery by pressing the F9 key during computer power on. If this is the case, plea[...]

GA-8I915MK-GV Motherboard - 5 8 - English 4-1-3 Flash BIOS Method Introduction Method 1 : Q-Flash TM Utility Q-Flash TM is a BIOS flash utility embedded in Flash ROM. With this utility, users only have to stay in the BIOS menu when they want to update BIOS. Q-Flash?allows users to flash BIOS without any utility in DOS or Windows. Using Q-Flash TM i[...]

Appendix - 59 - English Entering the Q-Flash TM utility: CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software  Standard CMOS Feature s  Adva nced BIOS Features  Integrated Peripherals  Power M anage ment Setup  PnP/PCI Configurations  PC Health Status  MB Intelligent Tweaker(M.I.T .) Select La nguage Loa d Fail-Safe Defau[...]

GA-8I915MK-GV Motherboard - 6 0 - English Dual BIOS Utility Boot From......................................... M ain Bios Main ROM T ype/Size.............................SST 49LF003A 512K Backup ROM T ype/Size.........................SST 49LF003A 512K Wide Ra nge Protection Disabl e Boot From M ain Bios Auto Recovery Ena ble Halt On Error Disa ble [...]

Appendix - 61 - English 3. Press Y button on your keyboard after you are sure to update BIOS. Then it will begin to update BIOS. The progress of updating BIOS will be displayed. Dual BIOS Utility Boot From......................................... M ain Bios Main ROM T ype/Size.............................SST 49LF003A 512K Backup ROM T ype/Size.....[...]

GA-8I915MK-GV Motherboard - 6 2 - English CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software  Standard CMOS Feature s  Adva nced BIOS Features  Integrated Peripherals  Power M anage ment Setup  PnP/PCI Configurations  PC Health Status  MB Intelligent Tweaker(M.I.T .) ESC: Quit F3: Cha nge La nguage F8: Dual BIOS/Q-Fla s[...]

Appendix - 63 - English Exploring the Q-Flash TM utility screen The Q-FlashBIOS utility screen consists of the following key components. T ask menu for Q-Flash utility: Contains the names of three tasks. Blocking a task and pressing Enter key on your keyboard to enable execution of the task. Action bar: Contains the names of four actions needed to [...]

GA-8I915MK-GV Motherboard - 6 4 - English 3. Press Y button on your keyboard after you are sure to update BIOS. Then it will begin to update BIOS. The progress of updating BIOS will be shown at the same time. Q-Flash Utility V1.30 Flash T ype/Size.................................SST 49LF003A 256K Keep DMI Data Ena ble Update BIOS from Floppy Save B[...]

Appendix - 65 - English Method 2 : @BIOS TM Utility If you do not have a DOS startup disk, we recommend that you use the new @BIOS utility. @BIOS allows users to update their BIOS under Windows. Just select the desired @BIOS server to download the latest version of BIOS. 1. Methods and steps: I. Update BIOS through Internet a. Click "Internet [...]

GA-8I915MK-GV Motherboard - 6 6 - English III. Save BIOS In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the current BIOS version. IV. Check out supported motherboard and Flash ROM: In the very beginning, there is "About this program" icon shown in dialog box. It can help you check [...]

Appendix - 67 - English 4-1-5 2 / 4 / 6 Channel Audio Function Introduction STEP 1: Connect the stereo speakers or earphone to "Line Out." 2 Channel Audio Setup We recommend that you use speakers with amplifier to get the best sound effect if the stereo output is applied. Line Out STEP 2: After installing the audio driver, you'll fin[...]

GA-8I915MK-GV Motherboard - 6 8 - English 4 Channel Analog Audio Output Mode STEP 1: Connect the front channels to "Line Out," the rear channels to "Line In." Line In Line Out STEP 2: After installing the audio driver, you'll find a Sound Effect icon on the lower right hand taskbar. Click the icon to select the function. ST[...]

Appendix - 69 - English Use the back audio panel to connect the audio output without any additional module. STEP 1: Connect the front channels to "Line Out",the rear channels to "Line In", and the Center/Subwoofer channels to "MIC In". Basic 6 Channel Analog Audio Output Mode Line Out Line In MIC In STEP 2: After insta[...]

GA-8I915MK-GV Motherboard - 7 0 - English STEP 1: Secure the metal bracket of the"Surround Kit" to the chassis back panel with a screw. Advanced 6 Channel Analog Audio Output Mode (using Audio Combo Kit,Optional Device): (Audio Combo Kit provides SPDIF output port : optical & coaxis and SURROUND-KIT : Rear R/L & CEN /Subwoofer) SU[...]

Appendix - 71 - English STEP 3: Connect the front channels to back audio panel's "Line Out", the rear channels to SURROUND-KIT's REAR R/L, and the Center/Subwoofer channels to SURROUND-KIT's SUB CENTER. STEP 4: After installing the audio driver, you'll find a Sound Effect icon on the lower right hand taskbar. Click the[...]

GA-8I915MK-GV Motherboard - 7 2 - English SPDIF Output Device (Optional Device) A "SPDIF output" device is an optional device. The SPDIF_IO cable with rear bracket could link to the "SPDIF_IO" connector (As picture.) For the further linkage to decoder, rear bracket provides coaxial cable and Fiber connecting port. STEP 3: Connec[...]

Appendix - 73 - English 4-2 T roubleshooting Below is a collection of general asked questions. T o check general asked questions based on a specific motherboard model, please log on to http://www.gigabyte.com.tw Question 1: I cannot see some options that were included in previous BIOS after updating BIOS. Why? Answer: Some advanced options are hidd[...]

GA-8I915MK-GV Motherboard - 7 4 - English[...]

Appendix - 75 - English[...]

GA-8I915MK-GV Motherboard - 7 6 - English[...]

Appendix - 77 - English[...]

GA-8I915MK-GV Motherboard - 7 8 - English[...]

Appendix - 79 - English Contact Us      T aiwan (Headquarters) GIGA-BYTE TECHNOLOGY CO., L T D. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4888 FAX: +886-2-8912-4003 T ech. Support : http://tw.giga-byte.com/T echSupport/ServiceCenter .htm Non-T ech. Support(Sales/Marketing) : http://ggts.gigabyte[...]

GA-8I915MK-GV Motherboard - 8 0 - English      China NINGBO G.B.T . TECH. TRADING CO., L TD. T ech. Support : http://tw.giga-byte.com/T echSupport/ServiceCenter .htm Non-T ech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.com.cn Shanghai TEL: +86-021-63410999 FAX: +86-021-634101[...]