Intel MIC-3358 Bedienungsanleitung

MIC-3358 6U CompactPCI Intel ® Pentium ® 4 Processor - M Single Board Computer with VGA / Dual Giga LAN / PMC User ’ s Manual[...]

MIC-3358 User’s Manual ii Copyright Notice This document is copyrighted, 200 3. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time wi thout notice. No part of this man- ual may be reproduced, copied, translat ed or transmitted in any form or by any means [...]

iii CE Notificatio n The MIC-3358, developed by Advantech CO., L TD., ha s passed the CE test for environment specification wh en shielded cables are used for external wiring. W e recommen d the use of shielded cables. Product warran ty Advantech warrants to you, the original purchaser , that each of its prod- ucts will be free from defects in ma t[...]

MIC-3358 User’s Manual iv Packing List Before installing yo ur board, ensure that the following materials have been received: • 1 MIC-3358 all-in-one single board computer • 1 Utility CD-ROM disc • 1 CPU Heat sink (Assembled ) • 1 CPU thermal dissipatio n paste • 1 Thermal pad (Assembled ) • 1 RJ-45 to RS-232 COM p ort adaptor • 1 H[...]

v Contents Chapter 1 Hardware Co nfiguration ................................. 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Specifications ............ .............. .............. .............. .............. 3 1.3 Functional Block Diagram ............... .............. ................. ..[...]

MIC-3369 User’s Manual vi 2.2 VGA Display Connector (CN9 or Rear I/O) ................... 26 2.3 PS/2 Keyboard and Mouse Connector (R ear I/O) ........... 26 2.4 Serial Ports (CN3 and Rear I/O) ...... .............. .............. ... 27 Table 2.1:MIC-3358 serial port default setti ngs ........... 27 2.5 Ethernet Configuration (PU1 , Rear I/O and[...]

vii Wizard"41 Figure 3.19:Click "Next" in th e windows ......... ............ 42 Figure 3.20:Click "Yes , I ha ve already connected the hardware"42 Figure 3.21:Select "Add a new hardware device" in the installed hardware window43 Figure 3.22:Click Install the hardware that I manually se- lect from a list (Advanced[...]

MIC-3369 User’s Manual viii B.2 J2 Connector .............. .............. ................. .............. ......... 71 Table B.2:J2 connector .. ................ ............ ........... ........ 71 B.3 J3 Connector .............. .............. ................. .............. ......... 72 Table B.3:J3 connector .. ................ ...........[...]

CHAPTER 1 Hardware Configuration[...]

MIC-3358 User’s Manual 2 Chapter 1 Hardware Configuration 1.1 Introduction The MIC-3358 is a CompactPCI® server blade with Intel® Pentium® 4 Processor-M on board to complian t with Compact Packet Switching Backplane (cPSB) systems. Support ing the PICMG 2.16 specificatio n, the MIC-3358 delivers a cost perfo rmance platform for those applicati[...]

3 Chapter 1 PMC (PCI Mezzanine Card ) IEEE1386.1 Compliant The MIC-3358 supp ort one PMC site and compliant with PICMG 2.3 (PCI Mezzanine Card) specification. This 32-bit/33MHz PMC interface provides front access capability by PMC modules for various function demandin g. Complete I/O Functions The MIC-3358 offers all the I/O functio ns of an indust[...]

MIC-3358 User’s Manual 4 • Chipset: Intel® 845E/ICH 4 Chipset • Front Side Bus: 400MHz (Intel® Pentium® 4 processor-M Processor) • Bus Interface: PCI 32-bit/33 MHz • 2nd level cache: Built-in 512KB on Intel® Pentium ® 4 processor-M die • RAM: 512MB ECC DDR26 6 memory on board. Support up to 2GB ECC DDR200/26 6. • Enhanced IDE int[...]

5 Chapter 1 • Display memory: 8MB SDRAM VRAM • Display Resolution Number of Colors: : Optional R ear I/O Board s • RIO-3309C NOTE: MIC-3358 does not support MIC-39 60 storage carrier board Mechanical a nd Envir o nmental Specifications • Operating temperature: 0 ~ 55° C (32 ~ 131° F) • Storage T emperature: -20 ~ 80° C (-4 ~ 176° F) ?[...]

MIC-3358 User’s Manual 6 1.3 Functional Block Diagram Figure 1.1: MIC-3358 fu nctional block diagram. Note: MIC-3358 does not support shutdown function of A TX power supp ly . 1.4 Jumpers 1.4.1 Jumper Locations T able 1-1 lists the jumper functi on. Fi gure 1-1 illustrates the jumper loca- tion. Read this section carefully before changing the jum[...]

7 Chapter 1 1.4.2 Clear CMOS (JP4) This jumper is used to erase CMOS data and reset system BIOS informa- tion. Follow the procedures below to clear the CMOS. 1. T urn off the system. 2. Close jumper JP4 (1-2) for about 3 seconds. 3. Set jumper JP4 (2-3) as normal. 4. T urn on the system. The BIOS is reset to its default setting. T able 1.2: JP1 jum[...]

MIC-3358 User’s Manual 8 1.5 Connectors On-board connectors link to external devices such as hard disk drives, keyboards, or floppy drives, etc. T able 1-6 lists the function of each con- nector and Figure 1- 1 and Figure 1-2 illustrate each connector location. Chapter 2 gives instructions for connect ing external devices to your card. T able 1.5[...]

9 Chapter 1 T able 1.7: CN1 IDE Connector Definitions Pin Signal Pin Signal 1P R S T # 2 G N D 3P I D 7 4 P I D 8 5P I D 6 6 P I D 9 7P I D 5 8 P I D 1 0 9P I D 4 1 0 P I D 1 1 1 1 PID3 12 PID12 13 PID2 14 PID13 15 PID1 16 PID14 17 PID0 18 PID15 19 GND 20 N/C 21 PDRQ# 22 GND 23 PIOW# 24 GND 25 PIOR# 26 GND 27 PRDY 28 CSEL* 29 P ACK# 30 GND 31 PIRQ [...]

MIC-3358 User’s Manual 10 T able 1.8: CN2 CompactFlash™ Socket Definitions Pin Signal Pin Signal 1 GND 26 N/C 2I D 3 2 7 I D 1 1 3 ID4 28 ID12 4 ID5 29 ID13 5 ID6 30 ID14 6 ID7 31 ID15 7 HCS1- 32 HCS3- 8 GND 33 N/C 9 GND 34 HIOR- 10 GND 35 HIOW- 1 1 GND 36 N/C 12 GND 37 HIRQ 13 +5V 38 +5V 14 GND 39 SANDISK 15 GND 40 N/C 16 GND 41 -HRST1 17 GND [...]

11 Chapter 1 T able 1.9: CN3 RJ-45 COM1 port Definitions Pin Signa l 1 NRLSD1 2 NRX1 3N T X 1 4 NDTR1 5G N D 6 NDSR1 7N R T S 1 8 NCTS1[...]

MIC-3358 User’s Manual 12 Note: Pin 1-2 handle closed Pin 1-3 handle open Note: Hand le closed is normal Figure 1.2: Handle Swit ch Definitions T able 1.10: CN4 Handle Switch Definitions Pin Signal 1 common 2 normal closed 3 normal open 1 2 3 CN2 CN1 CN4 CPU Battery JN4 JN1 JN2 CN6 PU1 Intel 845E JP1 JP4 JP7 PCI-PCIX Bridge CN9 CN8 CN5 CN3 D9 LED[...]

13 Chapter 1 T able 1.1 1: CN5 USB 1.1/2.0 port Definitions Pin Signal 1+ 5 V 2 USB_P2- 3 USB_P2+ 4G N D T able 1.12: CN6 USB 1.1/2.0 port De finitions Pin Signal 1+ 5 V 2 USB_P2- 3 USB_P2+ 4G N D[...]

MIC-3358 User’s Manual 14 T able 1.13: CN9 DB-15 VGA Connector Definitio ns Pin Signal 1R E D 2G R E E N 3B L U E 4N / C 5G N D 6G N D 7G N D 8G N D 9 N/C (VGA V CC) 10 GND 11 N / C 12 VGA_SDA 13 HSYNC 14 VSYNC 15 VGA_SCL T able 1.14: PU1 Gigabit LAN Connector Definitions Pin Signal 1M D I A X 1 + 2M D I A X 1 -[...]

15 Chapter 1 3M D I A X 2 + 4M D I A X 3 + 5M D I A X 3 - 6M D I A X 2 - 7M D I A X 4 + 8M D I A X 4 - The LED indicator means Left Right 10Mbps Off flick active/link mode 100Mbps Green 1000Mbps Orange T able 1.15: J1 1/J12 /J14 PMC Connector Definitions J1 1 PIN SIGNAL PIN# S ingle Name PIN# Single Name 1T C K 2 - 1 2 V 3 GND 4 INTC# 5 INTD# 6 INT[...]

MIC-3358 User’s Manual 16 33 FRAME# 34 GND 35 GND 36 IRDY# 37 DEVSEL# 38 +5V 39 GND 4 0 LOCK# 41 SDONE# 42 SBO# 43 P AR 44 GND 45 V(I/O) 46 AD15 47 AD12 48 AD1 1 49 AD9 50 +5V 51 GND 5 2 C/BE 0# 53 AD6 54 AD5 55 AD4 56 GND 57 V(I/O) 58 AD3 59 AD2 60 AD1 61 AD0 62 +5V 63 GND 64 REQ64# J12 PIN SIGNAL PIN# Single Name PIN# Single Name 1+ 1 2 V 2 T R[...]

17 Chapter 1 41 +3.3V 42 SERR# 43 C/BE1# 44 GND 45 AD14 46 AD13 47 GND 48 AD10 49 AD8 50 +3.3V 51 AD7 52 N/C 53 +3.3V 54 N/C 55 N/C 56 GND 57 N/C 58 N/C 59 GND 60 N/C 61 ACK64# 62 +3.3V 63 GND 64 N/C J14 Pin Signal PIN# Single Name PIN# Single Name 1+ 5 V a u x 2 + 5 V 3+ 5 V a u x 4 + 5 V 5 GND 6 GND 7N / C 8 N / C 9N / C 1 0 N / C 11 N / C 1 2 N [...]

MIC-3358 User’s Manual 18 47 CMM1_SCL 48 CMM1_SDA 49 CMM2_SCL 50 CMM2_SDA 51 BMC_BD_SEL 52 N/C 53 N/C 54 N/C 55 BMC_LEDA 56 BMC_LEDL 57 GND 58 GND 59 BMC_TX+ 60 BMC_RX+ 61 BMC_TX- 62 BMC_RX- 63 GND 64 GND T able 1.16: D9 LED Definitio ns Green Power Status Y ellow HDD Status T able 1.17: SW1 Vcore selection definitions[...]

19 Chapter 1 It's automatic selection wh en SW1-1~SW1-6 are all OFF . PS: X means either ON or OFF . SW1- 6 SW1- 5 SW1- 4 SW1- 3 SW1- 2 SW1- 1 VCORE OFF X X X X X AUTO ON ON O N ON ON ON 1.750V ON ON ON ON ON OF F 1.700V ON ON ON ON OFF ON 1.650V ON ON O N ON OFF OFF 1.600V ON ON ON OFF ON ON 1 .550V ON ON ON OFF ON OFF 1.500V ON ON ON OFF OFF[...]

MIC-3358 User’s Manual 20 When SW2 is ON, then the board is se lected as drone mode. The rest of the combination is reserved for other modes. Please refer to Appendix B for J1/2/3/5 pin assignments. Figure 1.3: MIC-3358 jumper and connector locations. 1 2 3 CN2 CN1 CN4 CPU Battery JN4 JN1 JN2 CN6 PU1 Intel 845E JP1 JP4 JP7 PCI-PCIX Bridge CN9 CN8[...]

21 Chapter 1 Figure 1.4: MIC-3358 front panel connector and indicator locations 1.6 Safety Precautions Follow these simple precautions to pr otect yourself from harm and the products from damage.[...]

MIC-3358 User’s Manual 22 1. T o avo id electric shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while th e PC is on. 2. Disconnect power before making any configu ration changes. The sud- den rush of power as you connect a jumper or install a card may d[...]

23 Chapter 1 Figure 1.5: Complete assembly with heat sink and hard disk 1.8 Software support The MIC-3358 comes with a utilit y CD-ROM disc, which includes driv- ers and utility programs of Gigabit Ethernet, IAA and VGA interfaces. The drivers support Windows 2000, XP and NT4.0 Operat ion systems. Please visit Intel® website for detailed explanati[...]

MIC-3358 User’s Manual 24[...]

CHAPTER 2 Connecting Peripherals[...]

MIC-3358 User’s Manual 26 Chapter 2 Connecting Peripherals 2.1 IDE Device (CN1 and Rear I/O) The MIC-3358 provides two IDE (Integrat ed Device Electronics) chan- nels via CN1 connector in MIC-3358 or via the J3 connector to the rear transition board (RIO -3309C). CN1 connector support one 2.5" IDE HDD in MIC-3358 and two IDE drives can be co[...]

27 Chapter 2 2.4 Serial Ports (CN3 and Rear I/O) The MIC-3358 offers one serial ports: COM1 in RS-232. W ith limited front panel access, one COM1 (CN3) can be connected via a RJ-45 to RS- 232 adaptor and COM2 (CN9) interface has to be connected via rear I/O module (RIO-3309C) for implement . These ports allow users to connect to serial devices (a m[...]

MIC-3358 User’s Manual 28 2.6 USB Connector (CN5/6 and Rear I/O) The MIC-3358 provides two USB (Universal Serial Bus) 2.0 chann els either via two front USB ports (CN5 and CN6) in MIC-3358 or via J5 connector to one USB c onnector (CN8) in real transition board. The USB interface gives complete plug and pl ay , hot attach/det ach for up to 127 ex[...]

29 Chapter 2 of MIC-3358 help you install and rem ove the card easily and safely . Fol- low the procedure below to install the MIC-3358 into a chassis: T o install a card: 1. Hold the card vertically . Be sure th at the card is pointi ng in the correct direction. The component s of the card should be p ointing to the right- hand side. 2. Pull out b[...]

MIC-3358 User’s Manual 30[...]

CHAPTER 3 Driver Setup[...]

MIC-3358 User’s Manual 32 Chapter 3 3.1 Overview Advantech provides CD ut ility driv er in the package. Please install Chipset INF driver , VGA graphics driver , LAN driver and Intel® Appli- cation Accelerator (IAA) driver sequentially . The Intel® Application Accelerator is a performance software package of Intel® chipset s. It reduces t he s[...]

33 Chapter 3 3.3 CMM (Chassis Mana gement Module) Driver MIC-3358 supports MIC-3924B CMM. Pl ease inst all driver as following procedur e. 3.3.1 Windows 2K Driver Figure 3.1: Right Click "My Computer" and click "Properties" Figure 3.2: T ab "Hardware" and click "Hardwa re W izard"[...]

MIC-3358 User’s Manual 34 Figure 3.3: click "Next" in Hardware Wizard Figure 3.4: click" Add/Troubleshoot a device"[...]

35 Chapter 3 Figure 3.5: sel ect " Add a new device" in Device windows Figure 3.6: click "No, I want to select the hardware from a list"[...]

MIC-3358 User’s Manual 36 Figure 3.7: Select "Other devi ces" in Hardware types windo ws Figure 3.8: T ab " Have Disk" in right bot tom[...]

37 Chapter 3 Figure 3.9: Browse proper driver in CD ROM device Figure 3.10: click ok in the W izard wind ows[...]

MIC-3358 User’s Manual 38 Figure 3.1 1: click " ok" in Add N ew Hardware Wi zard Properties" windows Figure 3.12: click "yes" in Creati ng a Forced Conf iguration windows[...]

39 Chapter 3 Figure 3.13: click "Next" in Add/Remove Hardware Wizard windows Figure 3.14: T ab "Finish" in Add/Remove Hardw are W iza rd windows[...]

MIC-3358 User’s Manual 40 Figure 3.15: click "Y es" to restart your computer Figure 3.16: Go to Device Manager to see available A-IPM drivers[...]

41 Chapter 3 3.3.2 Windows XP Driver Figure 3.17: Right click My Computer to select "Properties" Figure 3.18 : T ab "Hardw are" and cli ck "Add Ha rdware W izard"[...]

MIC-3358 User’s Manual 42 Figure 3.19: Click " Next" in the windows Figure 3.20: Click "Y es , I have already connected the hardware"[...]

43 Chapter 3 Figure 3.21: Select "Add a new hardware device" in the installed hardware window Figure 3.22: Click Install the hardware that I manually select from a list (Advanced)[...]

MIC-3358 User’s Manual 44 Figure 3.23: Select "Show all devices " in Common hardware types windows Figure 3.24: tab "Have Disk"[...]

45 Chapter 3 Figure 3.25: Select proper driver in CD-ROM Figure 3.26: tab A-IPM driver and click "Have Disk"[...]

MIC-3358 User’s Manual 46 Figure 3.27: Click " Next" Figure 3.28: Click "Finish"[...]

47 Chapter 3 Figure 3.29: Go to My computer to see "A-IPM dr ivers"[...]

MIC-3358 User’s Manual 48[...]

CHAPTER 4 A ward BIOS Setup[...]

MIC-3358 User’s Manual 50 Chapter 4 A ward BIOS Setup 4.1 A W ARD BIOS Setup Once you enter A ward® BIOS CMOS Setup Util ity , the Main Menu (Fig- ure 4-1) will appear on the screen. The Main Menu allows you to select from nine setup fun ctions and two exi t choices. Use arrow keys t o select among the items and press <Enter > to accept or[...]

51 Chapter 4 4.1.2 Standard CMOS Setup The items in Standard CMOS Setup Menu are divided into 11 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in ea ch item. Figure 4.2: Standard CMOS setup screen. Prim[...]

MIC-3358 User’s Manual 52 Figure 4.3: Advance BIOS features setup screen V irus W arning During and after the system boots up, any attempt t o write to the boot sec- tor or partition table of the hard disk drive will halt the system. If this happens, a warning message will be displayed. Y ou can run the anti-virus program to locate th e problem. [...]

53 Chapter 4 First/Second/Third Boot De vice and Boot Other Device The BIOS attempts t o load the operat ing system from the devices in the sequence selected in these items. The settings are Floppy , LS120, HDD - 0, SCSI, CDROM, HDD-1, HDD-2, HDD-3 , ZIP100, USB-FDD, USB- ZIP , USB-CDROM, USB-HD D, LAN and Disabled . PS: When you boot by USB CD-ROM[...]

MIC-3358 User’s Manual 54 T ypematic Rate Setting Key strokes repeat at a rate determin ed by the keyboard cont roller . When enabled, the typematic rate and type matic delay can be selected. The set- tings are: Enabled/ Disabled. Default is Disabled. T ypematic Rate (Chars/Sec) Set the number of times a second to repeat a key stro ke when you ho[...]

55 Chapter 4 Small logo (EP A) show Default is Disabled. 4.1.4 Advance Chipset Features Setup The Advanced Chipset Features Setup opt ion is used to change the values of the chipset registers. These registers control most of the system options in the computer . Choose the "ADV ANCED CHIPSET FEA TURES" from the Main Menu and the foll owing[...]

MIC-3358 User’s Manual 56 This field lets you insert a timi ng delay between the CAS an d RAS strobe signals, used when DRAM is written to, read from, or refreshed. Fast gives faster performance; and Slow gives more stable perform ance. This field applies on ly when synchro nous DRAM is installed in the system . The settings are: 2 and 3. DRAM RA[...]

57 Chapter 4 Delayed T ransaction The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles. Select Enabled to support compliance with PCI spec- ification ver sion 2.1. The settings are: Enabled (Defau lt) and Disabled. 4.1.5 Integrated Peripherals Figure 4.5: Integrated Peripherals setup screen[...]

MIC-3358 User’s Manual 58 On-Chip Primary/Secondary P CI IDE The integrated peripheral controller contains an IDE interface with sup- port for two IDE channels. Select En abled to activate each channel sepa- rately . The settings are: Enabled (Default) and Disabled. IDE Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/O utput[...]

59 Chapter 4 SMBus Connector Users can select IPMI sour ce and application as below . There are 3 options: MIC-3924B (Default), MIC-39 24A and CMM. LAN 1 Connector The item allows you to choice LAN1 connectiv e way . There are 3 options: Front (Default), 2.16 and Rear LAN 2 Connector The item allows you to choice LAN2 connectiv e way . There are 2 [...]

MIC-3358 User’s Manual 60 The Serial Port 2 settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/ IRQ3 (Default), Disabled, Auto. Onboard Parallel Port There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP , and EPP features. It has the followi ng options: Disabled, 3BCH/IRQ7 (Defaul t), 278H/IRQ5 , 378H/IRQ7 [...]

61 Chapter 4 ACPI Function This category allows you to select ACPI power management effective or not. The options: Enabled (Default) and Disabled. 4.1.7 PNP/PCI Configuration Setup This section describes confi guring the PCI bus system. PCI, or Personal Computer Interconnect, is a system wh ich allows I/O devices to operate at speeds nearing the sp[...]

MIC-3358 User’s Manual 62 operating system such as Windows® 95/98. If you set this field to "man- ual" choose specific resources by going into each of the sub menu that follows this field (a sub menu is preceded by a "y"). The settings are: Auto (ESCD) (Default ), Manual. IRQ Resources When resources are controlled manua lly [...]

63 Chapter 4 Load Optimized Defa ults (Y/N) ? N Pressing 'Y' loads the default values that are factory se ttings for optimal performance system operations. 4.1.10 Set Password T o change, confirm, or disable th e password, choose the "P ASS-WORD SETTING" option form the Setup main menu and press [Enter]. The password can be at m[...]

MIC-3358 User’s Manual 64[...]

Appendix A Programming the W atchdog T imer[...]

MIC-3369 User’s Manual 66 Appendix A A.1 Programming the W atchdog Timer T o program the watchdog tim er , yo u must write a program which writes a value to I/O port address 443 (hex). This output value represent s time interval. The value range is from 01 (h ex) to FF (hex), and the related time interval is 1 sec. to 255 sec. Data T ime Interval[...]

67 Chapter A 1070 RETURN 2000 REM Subroutine #2, your application task • • • 2090 RETURN.[...]

MIC-3369 User’s Manual 68[...]

Appendix B Pin Assignments[...]

MIC-3358 User’s Manual 70 Appendix B Pin Assignments B.1 J1 Connector #: Low active T able B.1: J1 connector Pin Z A B C D E F 25 GND +5V REQ64# ENUM# +3.3V +5V GND 24 GND AD[1] +5V V(I/O) AD[0] ACK64# GND 23 GND +3.3V AD[4] AD[3] +5V AD[2] GND 22 GND AD[7] GND +3.3 V AD[6] AD[5] GND 21 GND +3.3V AD[9] AD[8] M66EN C/BE[0]# GND 20 GND AD[12] GND V[...]

71 Chapter B B.2 J2 Connector #: Low active Note: GA[4...0] sh all be used for geograph ic addressing on the back plane T able B.2: J2 connector Pin Z A B C D E F 22 GND GA4 GA3 GA2 GA1 GA0 GND 21 GN D CLK6 GND RSV RSV RSV GND 20 GN D CLK5 RSV RSV GND RSV GND 19 GND RSV GND RSV (SMBB_S DA) RSV (SMBB_ SCL) RSV GND 18 GND RSV RSV RSV GND RSV GND 17 G[...]

MIC-3358 User’s Manual 72 B.3 J3 Connector #: Low active T able B.3: J3 connector Pin Z A B C D E F 19 GND NC NC NC NC NC GND 18 GND MDIA0+ MDIA0- GND MDIA2+ MDIA2- GND 17 GND MDIA1+ MDIA1- GND MDIA3+ MDIA3- GND 16 GND MDIB0+ MDIB0- GND MDIB2+ MDIB2- GND 15 GND MDIB1+ MDIB1- GND MDIB3+ MDIB3- GND 14 GND NC NC NC NC NC GND 13 GND SDD0 SDD2 NC NC N[...]

73 Chapter B B.4 J5 Connector T able B.4: J5 connector Pin Z A B C D E F 22 GND I CH_RX+ ICH_RX- GND ICH_TX+ ICH_TX- GND 21 GND BMC_RX + BMC_RX- GND BMC_TX+ BMC_TX- GND 20 GND GND GND USBD1- GND GND GND 19 GND USBD0- GND USBD1+ GND VGA_RED GND 18 GND USBD0 + GND GND VGA-H GND GND 17 GND GND RIO_REQ7# NC G ND VGA_GRE EN GND 16 GND USB_OC0# RIO_GNT7#[...]

MIC-3358 User’s Manual 74 B.5 System I/O Ports T able B.5: System I/O ports Address range (Hex) Device 000-00F Direct memory access controlle r 000-CF7 PCI bus 010-01F Motherboard resources 020-021 Programmable interrupt controller 022-03F Motherboard resources 040-043 System timer 044-05F Motherboard resources 060-060 Standard 101/102-Key or Mic[...]

75 Chapter B B.6 Interrupt Assignments B.7 1st MB Memory Map 4000-40BF Motherboard resources 5000-501F Intel® 82801DB/DBM SMBus cont roller -24C3 C000-C0FF A TI T echnologies Inc. Rage XL PCI C400-C43F Intel® 82540EM based network connection #2 C800-C83F Intel® 82540EM based network connection CC00-CC3F Intel® PRO/100 VE net work connection D00[...]

MIC-3358 User’s Manual 76[...]