JBL CVR700 Bedienungsanleitung

CVR700 HIGH-PERFORMANCE A UDIO/VIDEO RECEIVER/VIDEO PROCESSOR/OPTICAL DISC CHANGER  CVPD50 50-INCH HIGH-DEFINITION P LASMA DISPLAY ® OWNER’S GUIDE JBL CINEMA VISION ™ SY STEM CVR700 OM 12/17/04 4:25 PM Page 117[...]

JBL CINEMA VISION ™ SY STEM: CVPD50 HIGH-DEFINITION PLASMA DISPLA Y AND CVR700 CONTROL CENTER WITH A UDIO/VIDEO RECEIVER, VIDEO PROCESSOR AND OPTICAL DISC CHANGER 4 Important Safety Precautions 5 Introduction 7 Safety Information 10 What’ s Included 12 Disc Formats Supported by This Player 13 T erminology 16 CVR700 Front-Panel Controls 19 CVR70[...]

3 92 Programming Product Codes 92 Direct Code Entry 92 Auto Search Method 93 Learning Codes 93 Erasing Learned Codes 93 Macros 94 Programmed Device Functions 94 V olume Punch-Through 95 Channel Control Punch-Through 95 T ransport Control Punch-Through 95 Resetting the Remote Memory 96 CVR700R1 Remote Function List T able 98 CVR700R1 Remote Setup Co[...]

4 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufac- turer’ s instructions. 8. Do not install near any heat sources such as radiators, he[...]

5 INTRODUCTION Thank you for choosing JBL ® . The JBL Cinema Vision ™ home theater system is truly an entertainment system for the 21st century . JBL Cinema Vision is a com- plete, integrated audio/video system that combines the sophisticated performance of separate components with the conven - ience of a turnkey solution. The system includes a [...]

6 (5.1 and 7.1, Cinema and Music modes) n Seven channels of amplification n Internal five-disc changer plays DVD- Audio, DVD-V ideo, CD, VCD, CD- R/RW , DVD-R/RW , DVD+R/RW , MP3, WMA, Kodak ® Picture CD and JPEG discs n Extensive bass management options, including quadruple crossover and EzSet output-level calibration n Six A/V inputs with compos[...]

7 SAFETY INFORMA TION V erify Line Voltage Before Use Y our CVR 700 and CVPD50 have been designed for use with 120-volt AC cur- rent, and the plugs are specifically designed for 120-volt applications. Connection to a line voltage other than that for which the unit is intended can create a safety and fire hazard and may damage the unit. If you have [...]

8 Moving the Unit Before moving any of the units, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet. Important Note for CVPD50 Plasma Display: Always make sure that two people lift the CVPD50 plasma display together . Never attempt to lift the unit by yourself.[...]

9 Power Connection and Operator Control The CVPD50 plasma display and the CVR700 are completely disconnected from electrical power only when the power cables are removed from both units and/or the wall outlets, and the JBL Digital Link ™ cable connecting the CVR700 to CVPD50 is unplugged. Only connect the CVPD50 plasma display and the CVR700 to a[...]

10 What’ s Included CVPD50 Carton Contents: One CVPD50 50-Inch Plasma Display Screen (shown with credenza stand) One wall-mount bracket for the CVPD50 screen One power cord for the CVPD50 screen (packed with CVPD50) One JBL Digital Link cable to connect the CVPD50 screen to the CVR700 (3 meters; 5- and 10-meter lengths available separately), pack[...]

11 What’ s Included (continued) One CVR700R2 remote control One CVR700R1 remote control CVR700 OM 12/17/04 4:23 PM Page 11[...]

12 The unit can play the following types of discs: DVD CD 8cm (3") disc 8cm (3") disc 12cm (5") disc 12cm (5") disc The CVR700 will also play most DVD- V ideo, DVD-R, DVD-RW , DVD+R or DVD+RW blank discs, but we cannot guar- antee complete playback compatibility of DVD-recordable discs due to the wide variation in recorders and [...]

13 TERMINOLOGY Home theater equipment has changed a great deal since the first VCR was intro- duced about 30 years ago. Some of the terms used to describe and configure your CVPD50 PDP plasma display monitor and the internal DVD/CD changer in your CVR700 may be unfamiliar . Some of these terms are described in this section. Since they share some of[...]

14 Plasma Display . Composite, S-video and component video monitor outputs on the CVR700 are provided as a means of con- necting an auxiliary display only . On- screen status messages, and all digital video post-processing – including scaling, de-interlacing, and upconversion features of the CVR700 – are only available when used with the CVPD50[...]

15 composite video outputs are included for use with conventional televisions and projectors. Reading: This is a message that you will see when you first press the Play Button A e . It refers to the fact that the player must first examine the contents of the disc to see whether it is a CD or DVD, and then extract the information about the type of m[...]

16 CVR700 FRONT -P ANEL CONTROLS 5 % 1 7 6 9 ! # 3 2  Ô Ó 4 8 8 ) $ @ ^ & ( * A UDIO / VIDEO RECEIVER / VIDEO PROCESSOR / OPTICAL DISC CHANGER R L S R SL SBL SBR DIGITAL EX L OGIC 7 96/24 NEO:6 PRO LOGIC II 57CH. STEREO DVD A MP3 6:9 4:3 S VCD P-SCAN PCM 192K 96K R ANDOM PROGRAM RPERAT DISC ALL DSP SURR. G AME/CAM 1 Main Power On/Off: Pres[...]

17 See page 64 for information on storing preset stations. When the disc changer is the source, press this button to open or close the Disc Drawer 4 . The Lower Display Line E will prompt you to press a disc number . Press the Disc Selector 5 cor- responding to the number of the drawer you wish to access. 7 Front-Panel Optical Digital Audio Output:[...]

18 SOURCE line to adjust it). Scroll down to the VIDEO INPUT line and select it to configure the CVR700 to use the video input you connected your device to. % Headphones Jack: This jack may be used to listen to the CVR700's output through a pair of headphones. Be certain that the headphones have a standard 1/4" stereo phone plug, or that [...]

19 CVR700 FRONT -P ANEL INFORMA TION DISPLA Y A Disc-T ype Indicators: The DVD , DVD-Audio , CD , VCD or MP3 indicator will light to show the type of disc cur- rently being played. WMA and JPEG discs will be identified in the Upper and Lower Display Lines EH . B PCM Bitstream Indicators: The PCM indicator will light when a PCM (pulse code modulatio[...]

20 CVR700 REAR-P ANEL CONNECTIONS ¡ ™ £ ¢ ∞ § ¶ • ª ‚ ⁄ ¤ ‹ › fi fl ‡ ° · a b c d e f g h i j k U V W X Y ¡ Back Surround Speaker Outputs: These speaker terminals are normally used to power the back surround left/ back surround right speakers in a 7.1- channel system. In conformance with the CEA color -code specification[...]

21 terminal should be connected to the red (+) terminal on the Side Surround/ Surround Right speaker with the older color -coding. Connect the black (–) termi- nals on the CVR700 to the matching black negative (–) terminals for each side sur- round speaker . (See page 42 for more information on speaker polarity .) £ Center Speaker Outputs: Con[...]

22 › Composite and S-V ideo Monitor Outputs: If you are not using the CVPD50, or if you desire a secondary dis- play , connect thse jacks to the composite or S-video input of a TV monitor or video projector to view the output of any stan- dard video source selected by the receiv- er’ s video switcher . If both standard com- posite and S-video s[...]

23 to this jack. The signal may be a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to this jack. This input is permanently assigned to the Cable/Satellite source input. j Digital Recorder Optical Digital Audio Input: Connect the optical digital audio output from a DVD player [...]

24 CVR700R2 REMOTE CONTROL FUNCTIONS 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 31 32 30 28 29 a c e g i k m o q s u w y ` b d f h j l n p r t v x z 0 Power Off (All) 1 Power On (All) 2 LCD Information Display 3 Input Selectors 4 Screen Selector 5 System Selector 6 Surround Mode Selector 7 T est T one Button 8 Logic 7 Mode[...]

25 CVR700R2 REMOTE CONTROL FUNCTIONS IMPORT ANT NOTE: The JBL Cinema Vision remotes are powerful devices capable of controlling virtually your entire home cinema system. In comparison to a traditional system of the same capabili- ties, these remotes can replace up to 10 separate remote controls and therefore end the confusion and clutter associated[...]

26 A Audio Input Selector: Press this button to select one of the digital audio inputs 9) cdefhijk for use with its source or to select the analog audio input for that source. It is not possi- ble to reassign a digital audio input to another source. See page 60 for more information on using digital inputs. B Direct/Brightness/Window Button: Press t[...]

27 next lower station with acceptable signal strength and stop. The Lower Display Line E will indicate AUTO TUNED . When an FM Stereo station is tuned, the display will read AUTO ST TUNED . When the tuner is in Manual/Mono mode, you may press and hold this button to scan downward through the frequencies, and the tuner will stop immediately when you[...]

28 The Letterbox adjustment is temporary and will only apply to that disc. We encourage you to experiment with the modes to find one that suits you for a given presentation. Additional aspect ratio adjustments are available using the Frame Button Q . Q Repeat/Frame Button: This but- ton’ s function differs depending on whether the internal disc c[...]

29 In Screen mode, or when used with a video source device that is used for ob- taining television broadcasts, such as a cable box, satellite receiver , T iVo, PVR, DVR or VCR, this button allows you to select between the television signal or one of the device’ s video inputs. See the device’ s owner’ s manual for more infor- mation on the us[...]

30 When an optical player source, such as the internal DVD changer , is in use, press this button to search quickly forward through the current track or chapter . Depending on the type of disc used in the internal DVD changer , each additional press will cycle through the available scan speeds as follows (available scan speeds may differ for extern[...]

31 n DTS Neo:6 Mode/Broadcast Preset Button: This button’ s function varies depending on whether the System or Screen mode has been selected. In System mode, this button is used to select a DTS Neo:6 audio surround mode. See page 62 for more information on the available DTS Neo:6 options. In the Screen mode, pressing this button automatically adj[...]

32 CVR700R1 REMOTE CONTROL FUNCTIONS The CVR700R1 remote is capable of performing most of the same functions as the CVR700R2 remote control, which is intended mainly for system setup, but is smaller and easier to handle on a day-to-day basis. The most noticeable functions missing from the CVR700R1 remote are the LCD information screen, and the EzSe[...]

33 IMPORT ANT NOTE: The JBL Cinema Vision remotes are powerful devices capable of controlling virtually your entire home cinema system. In comparison to a traditional system of the same capabili- ties, these remotes can replace up to 10 separate remote controls and therefore end the confusion and clutter associated with having a different remote fo[...]

34 CVPD50 screen, press the Screen Selector . Press and hold any of these buttons to power on the CVR700, the CVPD50 and the source device, and to begin play of the source device. Mute Button: Press this button to momentarily silence the CVR700. Press it again, or use the V olume Up/Down Control to restore audio. V olume Up/Down Control: T o raise [...]

35 4:3 L TRBOX TO 16:9 – This mode is used to adjust an image which is designed to display a 16:9 movie on a 4:3 screen. In order to preserve the full width of the movie on a narrower screen, the image is reduced in size and black bars appear above and below it. This setting zooms in on the image, enabling it to fill the CVPD50’ s 16:9 screen w[...]

36 movie on a narrower screen, the image is reduced in size and black bars appear above and below it. This setting zooms in on the image, enabling it to fill the CVPD50’ s 16:9 screen without losing any portion of the image. The image is simply enlarged so that its two sides fit the edges of the CVPD50 16:9 screen and the black bars on top and bo[...]

37 is detected at that frequency . See page 64 for more information on using the tuner . When an optical player source, such as the internal DVD changer , is in use, press this button to search quickly forward through the current track or chapter . Depending on the type of disc used in the internal DVD changer , each additional press will cycle thr[...]

38 Power Off (All): Press this button to place the CVR700 and CVPD50, or a selected device, in the Standby mode. Press and hold this button to place all devices, including the CVR700, the CVPD50 and any other products whose codes you have programmed into the remote, into the Standby mode. IR T ransmitter/Receiver: The infrared emitters and receiver[...]

39 Before unpacking and placing the JBL Cinema Vision components, it is impor- tant to select appropriate locations for each component. Make sure that all power switches are turned off and all equipment remains unplugged from AC power until the system is completely installed and connected in order to pre- vent electric shock, or transient signals t[...]

40 ance that matches that of the optional CVTS50 speaker stands, the stand includes a cradle for placement of the center speaker . IMPORT ANT SAFETY NOTES: • The credenza stand consists of three main parts: two metal columns and a glass base. Be extremely careful in handling the fragile glass base to avoid breakage that might result in personal i[...]

41 The following tips can help you avoid burn-in: • Be particularly careful during the first 100 hours of use to display mainly moving images or frequently changing still images. • Use your display in full-screen (16:9) format, rather than letterbox (black bars at top and bottom of screen) or 4:3 (black bars to left and right of screen). • Re[...]

42 Basic Installation The JBL Cinema Vision system offers a vari- ety of entertainment options, including play- back of DVDs and CDs, and radio listening, and it may be enjoyed with no additional equipment. However , it is also compatible with most available audio/video devices. IMPORT ANT NOTE: For your personal safety and to avoid possible damage[...]

43 sides of the listening position. The two remaining speakers are referred to as back surround speakers, as they are placed in back of (behind) the listening position. In 7.1-channel applications, place two of the surround speakers in the side positions, and place the two back surround speakers on the rear wall. In Dolby Digital and DTS systems, s[...]

44 Cable/Satellite Analog S-Video Input ‹ in order to view the CVR700’ s audio on-screen menu system. Digital Recorder Source Input If you have a personal video recorder (PVR), such as a T iV o, we recommend that you connect it to the Digital Recorder (DR) source input and output jacks. Alternatively , use the Digital Recorder source for a DVD [...]

45 NOTE: All remotely controlled compo- nents must be linked together in a “daisy chain.” Connect the IR OUT jack of one unit to the IR IN of the next to establish this chain. Y ou are now ready to power up the sys- tem, make minor configuration settings, and then begin enjoying your JBL Cinema Vision system. 1. Plug the AC power cords for the [...]

46 the menu line or option that the on- screen › cursor is currently pointing to. However , the ADVANCED submenu functions differently , in that the settings are adjusted directly on screen rather than by using submenus. At that time both the setting name and the currently selected setting will be displayed in the Lower Display Line E . System Co[...]

47 mode, which passes the digital audio to the CVR700’ s processor so that low-fre- quency portions of the audio may be steered to the appropriate speakers depending on the capabilities of your specific speakers. If you are using the JBL Cinema V ision speaker system, you may leave the DVD-Audio disc audio mode at the default BASS MANAGEMENT sett[...]

48 reset that source to the factory default settings. Speaker Configuration It is important to make sure that the CVR700 is correctly configured for your speakers so that low frequency portions of the audio program will be steered to the appropriate loudspeakers (this is called bass management). Speaker con - figuration also ensures that there are [...]

49 signals will be sent to the subwoofer output. When NONE is selected, surround sound information will be split between the front left and front right outputs. For optimal performance when no surround speakers are in use, the Dolby 3 Stereo mode should be used. When you have completed your selec- tions for the side surround channels, press the ⁄[...]

50 cursor is next to the SUBWOOFER line, and then press the ‹ / › Navigation Controls q until the name of the speaker group with the desired crossover frequency appears. Of course, you may also experiment with dif- ferent settings to find the one that pro- vides the smoothest and most complete bass response in your particular listening environm[...]

51 Using EzSet The JBL Cinema Vision EzSet (main) remote makes it possible to quickly and accurately set the output levels without the use of a sound-pressure meter , although manual adjustment is also avail- able. However , for the easiest setup, fol- low these steps while seated in the listen- ing position that will be used most often: 1. Make ce[...]

52 NOTE: Remember to verify that the speakers have been properly connected. As the test noise circulates, listen to make certain that the sound comes from the speaker position shown in the Lower Display Line E . If the sound from a speaker location does NOT match the position indicated in the display , stop the test tone by pressing the T est T one[...]

53 Scroll down one more line to the VOL DEFAULT LEVEL line, and use the Navigation Controls q to select the setting you chose above as a comfortable default turn-on volume. Press the Set Button s to enter your selection into memory . Y our setting will be retained, even after the unit is pow- ered off. Main Menu T ime-Out The OSD menu system is use[...]

54 The first line of the SETUP MENU is the TV DISPLAY setting, which should be set to match the aspect ratio of your video display device. For the CVPD50, this setting should be left at its factory default of 16:9 WIDE . If you are using a different video display monitor that has a 4:3 aspect ratio screen and is capable of displaying a progressive [...]

55 DVD-Audio disc, change the DVD AUDIO line to OFF . Y ou may switch back and forth between the ON and OFF settings at any time to access either set of materials. The SLIDE SHOW line allows you to set the amount of time a JPEG still image will remain on screen before the CVR700 automatically advances to the next image on the disc. Y ou may set thi[...]

56 possible, and the numerical value is 0. Use the ‹ / › Navigation Controls q to adjust the position of the image if it is not initially centered on the screen. • Vertical Position : This temperature bar reflects the vertical positioning of the image on screen. When the dark square is completely to the left, the image is moved as far to the [...]

57 adjust it so that a typical video picture has about the same appearance as the surroundings in the room. That way the eye is relaxed when watching the TV pic- ture. This setting may be reduced when the surrounding light is dimmed, thereby usually improving the sharpness signifi - cantly . Sharpness : This temperature bar and numerical value (ran[...]

58 movie frame. For this reason, it is not possi- ble to remove those black bars, and you may prefer to watch a non-letterboxed ver- sion of the movie if provided on the disc. Y ou may notice that the picture jumps as it is resized, and this is normal. If the pic - ture has large dark areas, particularly near the frame edges, the picture may be res[...]

59 Once you have completed the initial setup and configuration of the JBL Cinema Vision system, it is simple to operate and enjoy . The following instruc- tions will help you maximize the enjoy- ment of your new home theater system: T urning the CVR700 and CVPD50 On or Off Plug the CVPD50 and CVR700 power cords into unswitched AC wall outlets. When[...]

60 Lower Display Line E . Next, use the ⁄ / ¤ Navigation Control q to change the setting as desired. The unit will return to normal operation within 5 seconds after the setting is changed. • For private listening, plug the 1/4" stereo phone plug from a pair of stereo headphones into the front-panel Headphone Jack % . When the headphone’[...]

61 ers cannot pass through the DTS signal. If you’re in doubt as to the capability of your DVD player to handle DTS discs, consult the player’ s owner’ s manual. NOTE: Many DVD players have a default setting that does not pass through the DTS data, even though the machine is capable of doing so. If your external DVD player has the “DTS Digi[...]

62 MODE FEA TURES Dolby Digital Available only with digital input sources encoded with Dolby Digital data. It provides up to five separate main audio channels and a special dedicated low-frequency effects channel. Dolby Digital EX Available when the receiver is configured for 6.1/7.1 channel operation, Dolby Digital EX is the latest version of Dolb[...]

63 feed to the CVR700 or to select between Dolby Digital or DTS. It is also possible for the type of signal feed to change dur- inh the course of a DVD’ s playback. In some cases, the previews or special material will be recorded in 2.0 audio, while the main feature is available in 5.1 audio. The CVR700 will automatically sense changes to the bit[...]

64 VCR Analog Audio/V ideo Outputs ¤ . However , the digital signals will be passed through to the Digital Audio Outputs ¶bg . T uner Operation The CVR700’ s tuner is capable of tuning AM, FM and FM Stereo broadcast sta- tions. Stations may be tuned manually , or they may be stored as favorite station presets and recalled from a 30-position mem[...]

65 as an SPL meter to guide you to the cor- rect level settings. T o use the EzSet remote as an SPL meter , follow the instructions on page 51. Once the reference level has been set, press the Level Button p and SP LEVEL FL 0 will appear in the Lower Display Line E with FL 0 flashing. T o change the level, first press the Set Button s to select the[...]

66 OPTICAL DISC CHANGER PLA YBACK BASICS Loading Discs T o load discs in the CVR700, first turn the CVR700 on by pressing the Main Power On/Off Switch 0 . Set the CVR700 to the DVD source input either by slowly rotating the Source Selector & until it engages in the notch and DVD appears in the Information Display Ô , or by pressing the DVD Inp[...]

67 denoted by a number preceding it to indi- cate its order of availability . Next, the language is displayed, such as ENG for English or SP A for Spanish. Following this is the bitstream type, which may be PCM for a two-channel format; or DTS or the Dolby logo for one of those formats. Next to the format is an icon that reflects the number and loc[...]

68 JBL On Screen Library , which conveniently displays the loaded discs without your having to look at each disc individually . When play is stopped, you may use the JBL On Screen Library feature. Press the OSL Button d , and the CVR700 will read and identify all loaded discs, a process which may take several minutes, but which only needs to be per[...]

69 DVD-Audio, DVD-Video or JPEG discs. When available, Simply press the Random Button z to enter Random mode (a banner will appear on screen), and again to exit Random mode. Audio CDs: Y ou may enter or exit Random mode either while the disc is playing, or after play has been stopped by pressing the Stop Button #w twice. VCDs: Random mode is only a[...]

70 DVD PLA YBACK Using a DVD’ s Menu One of the unique features of the DVD system is that it offers a producer the opportunity to include a wide range of features on a disc, including multiple- language tracks; subtitles in a variety of languages; special information such as movie trailers and cast information; as well as other customized informa[...]

71 CD PLA YBACK Audio CD Playback Features When playing audio CDs, your DVD player has the same features as a CD player , including track skip, repeat play and programmed playback, as described on pages 68–69. Y ou may also access these functions directly using the remote control. Selecting a T rack During Stop, Resume or Play mode, enter t he tr[...]

72 MP3/WMA PLA YBACK The CVR700 is among those DVD players that are able to play back discs recorded with MP3 or WMA files. This means that you may enjoy the latest music using discs created in your computer through the high-quality audio components in your home theater system. As the way that MP3 and WMA files are recorded on discs differs from th[...]

73 Programmed Playback With MP3 or WMA Discs The CVR700 is capable of creating play- lists of the files on a properly recorded disc. T o create a playback list for MP3 or WMA titles, follow the same steps as for programming a playlist for any other format disc as described on page 75. JPEG Playback The CVR700 is one of the few available DVD players[...]

74 VCD PLA YBACK VCD, a format that predates DVD, is based o n a different compression format than DVD and a recording method that is similar to CD. Although the DVD has, for the most part, replaced VCD as a format, the CVR700 offers VCD playback so that you may play your existing library of VCD discs. There are two versions of the VCD fo rma t: an[...]

75 Programmed play allows you to select any track from an audio CD for playback in a specific order . This type of program- ming is particularly useful for parties or other situations in which you desire con- tinuous playback of specific selections for a long period of time. Begin by stopping play and pressing the Program Button S and a list of loa[...]

76 PROGRAMMING THE CVR700R2 REMOTE The CVR700R2 remote is factory-pro- grammed for all functions needed to operate the unit. In addition, it is also preprogrammed to operate most recent JBL DVD players and changers, CD play- ers and changers, CD recorders and cas- sette decks. The codes for other brand devices may be programmed into the CVR700R2 re[...]

77 NOTE: If the brand name for the product you wish to program does not appear in the list, the codes may still be available, as some manufacturers share codes. If the desired brand is not listed, press the Exit/Cancel Button r to exit the programming process, and skip to the instructions shown at right for the “Automatic” method of programming[...]

78 example, we will select “HDTV- T uner” to enter the codes needed to operate your HDTV set-top box. 6. At the next menu screen on the remote, press the ⁄ Navigation Button q so that the bottom line of the LCD display reads AUTO (Fig. 62) and then press the Set Button s to enter the Automatic programming mode. Figure 62 7. As instructed on t[...]

79 appears. The available options are DVD/MAIN, SYSTEM, SCREEN, DVI/DVD, TIVO, GAME, CABLE, VCR, TV and FM/AM [TUNER]. We recom- mend that you learn new codes only for devices that are external to the JBL Cinema V ision system. For this example, we will select “DVI/DVD” to enter the codes needed to operate an external DVD player with a DVI outp[...]

80 ent button. For example, in the steps below , we will explain how to program the digital recorder buttons to provide the commands to operate a VCR. Of course, you may program the remote to have any of the devices take on the code set of any other device, as your system requires. And, with the remote’ s “Edit” function, you can even change [...]

81 is easier than ever for you to take advan- tage of the power of macro commands. Recording a Macro T o record a macro into the remote’ s mem- ory , follow these steps: 1. Press and hold the Remote Menu Button b for about three seconds while the message shown in Figure 54 appears in the remote’ s LCD Information Display 2 . Release the button [...]

82 to the cable/satellite inputs. If you have programmed the cable or satel- lite set-top box’ s remote control codes, the device will be turned on. c. Press and hold the VCR Selector 3 , and the CVR700 will switch to the source device connected to the VCR inputs. If you have programmed the VCR's remote control codes, the device will be turn[...]

83 Punch-Through Configuration Punch-through is a capability of the remote that allows the V olume controls, Channel Up/Down buttons or T ransport keys (Play , Stop, Record, Pause, Fast Forward and Reverse, and Skip Up/Down) to link to a different device. For example, if your TV , cable box or satellite receiver is connected through the CVR700, you[...]

84 box’ s channel controls to be active. Press the ⁄ / ¤ Navigation Button q until the name of the base device appears and then press the Set Button s . Figure 95 5. At the next display screen (Fig. 96), you will select the device whose Channel Up/Down commands will be used. Press the ⁄ / ¤ Navigation Button q until the desired device name [...]

85 able only through the remote’ s menu sys- tem being described in this section. T o avoid having the calibration settings created with EzSet changed accidentally , the remote allows you to disable the SPL Select Button 9 on the remote. T o de-activate the button, follow these steps: 1. Press and hold the Remote Menu Button b for about 3 seconds[...]

86 will move the cursor one more space to the right, leaving a blank space between the last letter and the next one. 8. Repeat Step 7 as needed to enter all the needed letters, numbers, charac - ters and spaces. 9. When the text entry is complete, press the Set Button s . The LCD display will blink DEVICE RENAMED three times and then return to norm[...]

87 next letter needed is a “U, ” so you would press the “8” button twice. b. T o enter a letter that uses the same numeric key , you must first press the › Navigation Button q to move the blinking cursor block to the next position. Then press the Alphanumeric Key l as required to enter the desired letter . This is the way you would enter [...]

88 • Extensive use of the programming, learning and configuration functions of the remote may consume significantly more battery power than normal remote operation. While the batteries should last for four to six months in normal operation, you may find that they need to be changed sooner after the remote is programmed for the first time. • Whe[...]

89 NO. BUTTON DVD FM/AM TV VCR CD(R) DVD(R) DVHS GAME CAM TIVO PVR CBL SA T SCREEN SYSTEM HDTV NAME (MAIN) (TUNER) 01 All On Power On Power On Power On Power On Power On Power On Power On Play Start/Stop Power On Power On Power On Power On Powerr On Power On 02 All Off Power Off Power Off Power Off Power Off Power Off Power Off Power Off Stop Start[...]

90 NO. BUTTON DVD FM/AM TV VCR CD(R) DVD(R) DVHS GAME CAM TIVO PVR CBL SA T SCREEN SYSTEM HDTV NAME (MAIN) (TUNER) 34 OSD/Contrast OSD OSD OSD/Display OSD Prev Chapter OSD Display Display Info Info OSD OSD Contrast OSD OSD/Display 35 Angle/T une(*) Angle T uning Mode Select Angle Rec Link Angle Photo Angle A V * Ratio 36 0 0 0 0 0 0 0 0 0 0 0 0 0 0[...]

91 NO. BUTTON DVD FM/AM TV VCR CD(R) DVD(R) DVHS GAME CAM TIVO PVR CBL SA T SCREEN SYSTEM HDTV NAME (MAIN) (TUNER) 66 PVR Replay/Prog Program Program Program Disc/T op Menu Program Program Edit TIVO Repeat PVR Replay Replay 67 PVR List/D.Skip Disc Skip Disc Skip Disc Skip Disc Skip Skip Search R1 X2 Skip Skip PVR List List 68 PVR Live/D.Direct Disc[...]

92 In addition to its powerful CVR700R2 remote control, the JBL Cinema Vision system also includes a smaller CVR700R1 remote intended for everyday use. This remote features many of the same func- tions as the main remote, including the capability of controlling most popular brands of audio and video equipment, such as CD players, cable boxes, digit[...]

93 For future reference, enter the setup codes for the equipment in your system here: Source Device Product Button T ype Code AUX VCR CBL/SA T GAME/CAM DR DVI/COMP Learning Codes In addition to using codes from the remote’ s internal code library , the remote is able to “learn” codes from remotes that may not be in the code library . Also, yo[...]

94 g. Press and hold the DVI/Comp Selector , and the CVR700 will switch to the source device connected to the DVI inputs. If you have pro- grammed the device’ s remote control codes, the device will be turned on, and the play command will be trans - mitted to it. 3. The Screen Saver Button is activated while in screen mode by press ing and holdin[...]

95 programming a V olume Punch-Through, you will need to repeat the steps shown above. However , press the same Input Selector in Steps 1 and 2. Channel Control Punch- Through The secondary remote may be pro- grammed to operate so that the channel control function for either the TV , cable or satellite receiver used in your system may be used in co[...]

96 NO. BUTTON NAME DVD FM/AM TV VCR CD(R) DVD(R) DVHS GAME CAM TIVO PVR CBL SA T SCREEN SYSTEM HDTV (MAIN) (TUNER) 01 All On Power On Power On Power On Power On Power On Power On Power On Play Start/Stop Power On Power On Power On Power On Power On Power On 02 All Off Power Off Power Off Power Off Power Off Power Off Power Off Power Off Stop Start/[...]

97 NO. BUTTON NAME DVD FM/AM TV VCR CD(R) DVD(R) DVHS GAME CAM TIVO PVR CBL SA T SCREEN SYSTEM HDTV (MAIN) (TUNER) 32 Disc Direct/Favorite Disc Direct Disc Direct Favorite Disc Direct Q.V R1 CM Skip Favorite Favorite Ch Favorite 33 Disc Skip/Last Ch Disc Skip Disc Skip Prev Ch/ Prev Ch/ Disc Skip Disc Skip Skip Search R2 Delay/Last Ch Skip Skip Pre[...]

98 Maker (Brand) Name Code Number (3-Digit) List AKAI 001 070 008 AMPRO 001 070 008 AMSTRAD 001 011 103 AOC 001 011 103 ANAM 045 057 103 106 122 AMARK 103 132 ADMIRAL 103 132 CANDLE 001 002 003 011 CAPEHART 059 CENTURION 070 CENTRONIC 045 CITIZEN 001 002 003 011 045 092 094 132 CLASSIC 045 CONCERTO 011 CONTEC 041 045 051 052 CORONADO 132 CRAIG 045 [...]

99 Maker (Brand) Name Code Number (3-Digit) List NEC 001 013 022 025 042 057 121 123 125 ONKING 045 ONW A 045 OPTONICA 025 077 080 081 082 083 084 ORION 025 077 080 081 082 083 084 P ANASONIC 036 038 057 087 120 148 PENNEY 068 PHILCO 001 003 011 045 060 061 065 118 132 148 PHILIPS 001 003 011 040 060 067 088 132 145 148 PIONEER 001 011 024 029 031 [...]

100 Maker (Brand) Name Code Number (3-Digit) List LG 960 MOTOROLA 961 RCA 957 SAMSUNG 959 ZENITH 958 CVR700R1 HDTV SETUP CODES CVR700 OM 12/17/04 4:25 PM Page 100[...]

101 Maker (Brand) Name Code Number (3-Digit) List AIW A 191 AKAI 173 199 201 259 260 277 AMPRO 227 285 ASA 227 285 ANAM 190 221 AUDIO DYNAMICS 169 195 199 CANDLE 285 286 288 CANON 185 190 221 286 291 CITIZEN 285 CRAIG 154 196 267 CURTIS MA THES 190 221 DAEWOO 163 165 168 220 249 253 254 X DUAL 169 195 199 DYNA TECH 191 208 ELECTROHOME 214 EMERSON 1[...]

102 Maker (Brand) Name Code Number (3-Digit) List REALISTIC 153 154 160 168 171 208 209 238 288 293 RUNCO 213 279 RICO 213 279 SALORA 171 SAMSUNG 184 189 196 239 241 244 249 256 257 260 SANSUI 179 199 203 267 SANYO 154 165 168 171 266 SCOTT 174 249 263 SEARS 154 167 168 170 171 177 221 228 238 293 SHARP 156 209 221 280 SONY 154 166 167 207 211 212 [...]

103 Maker (Brand) Name Code Number (3-Digit) List ADCOM 804 818 824 AIW A 827 866 873 911 925 AKAI 805 939 AUDIOACCESS 880 AUDIOFILE 776 AUDIO TECHNICA 808 BSR 799 CALIFORNIA AUDIO 770 864 CARVER 812 891 895 896 898 899 900 940 941 CROWN 797 DENON 782 942 943 EMERSON 804 807 FISHER 778 810 812 823 FUNAI 881 HARMAN KARDON 756 780 795 806 809 821 825[...]

104 Maker (Brand) Name Code Number (3-Digit) List BANG OLUFSEN 257 DENON 261 HARMAN KARDON 262 KENWOOD 260 PHILIPS 259 SONY 258 CVR700R1 DVD SETUP CODES Maker (Brand) Name Code Number (3-Digit) List APEX DIGIT AL 715 730 BRA VO 734 735 CALIFORNIA AUDIO 694 DENON 656 673 676 688 705 DVD VIDEO 728 GE 657 658 HARMAN KARDON 655 686 720 JBL 655 JVC 660 [...]

105 Maker (Brand) Name Code Number (3-Digit) List BROKSONIC 017 CYBER HOME 020 GO VIDEO 014 JVC 012 LITE ON 021 MAGNA VOX 016 P ANASONIC 005 006 007 008 009 PHILIPS 016 PIONEER 004 015 RCA 019 SAMSUNG 013 SANSUI 017 SONY 001 002 003 TOSHIBA 010 011 018 ZENITH 014 CVR700R1 D-VHS SETUP CODES Maker (Brand) Name Code Number (3-Digit) List JVC 602 MITSU[...]

106 Maker (Brand) Name Code Number (3-Digit) List ABC 303 305 313 347 350 354 361 412 ALLEGRO 413 AMERICAST 369 ANTRONIX 323 ARCHER 314 316 323 333 414 BELCOR 415 CABLE ST AR 335 415 CENTURION 394 CENTURY 316 CITIZEN 316 413 COLOUR VOICE 371 392 COMBANO 385 386 COMTRONICS 328 339 DIAMOND 332 DIGI 416 EAGLE 329 339 348 488 EASTERN 365 368 372 417 EL[...]

107 Maker (Brand) Name Code Number (3-Digit) List SAMSUNG 339 374 488 SCIENTIFIC A TLANT A 305 306 307 349 350 351 353 354 381 393 404 405 406 407 408 410 411 428 430 431 432 485 486 SEAM 423 SHERITECH 331 SIGNAL 339 SIGNA TURE 303 490 SL MARX 339 SONY 429 SPRUCER 355 383 479 491 ST ARCOM 304 313 317 318 465 ST ARGA TE 317 339 422 SYL V ANIA 373 T [...]

108 Maker (Brand) Name Code Number (3-Digit) List ALPHAST AR 561 ALPHAST AR DBS 653 ALPHAST AR DSR 625 645 AMPLICA 559 BIRDVIEW 617 628 BSR 562 CAPETRONICS 562 CHANNEL MASTER 523 524 525 528 564 CHAP ARRAL 508 518 519 522 583 CITOH 563 CURTIS MA THES 559 DRAKE 515 520 521 604 616 DX ANTENNA 534 555 565 582 605 ECHOST AR 509 510 543 567 598 599 600 [...]

109 TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE SOLUTION Unit does not turn on • Main Power Switch turned off • Press in Main Power Switch 0 . • No AC power • Check AC power plug and make certain any switched outlet is turned on. • Standby pressed within 4 seconds • Press the Standby Switch at least after Main Power Switch 4 seconds af[...]

110 SYMPTOM POSSIBLE CAUSE SOLUTION The Feature Not Available • Requested function not available at • Certain functions may be disabled by message appears this time the DVD itself during passages of a disc. Picture is displayed in the • Incorrect match of aspect ratio • Change aspect ratio settings (see pages 13 wrong aspect ratio settings [...]

111 JBL CINEMA VISION TECHNICAL SPECIFICA TIONS CVPD50 Display Size/Diagonal 50" (1270 mm); 16:9 Widescreen format Displayable Picture Size (W x H): 43-1/2" x 24-1/2" (932mm x 532mm) Resolution: 1366 x 768 pixels V iewing Angle: <160˚ Contrast Ratio: 3,000:1 Brightness: 1,000 cdl/m 2 Storage T emperature: –15˚C to +60˚C Opera[...]

112 Outputs: Composite (CVBS) V ideo: Rear Panel: 2 S-Video (Y/C): Rear Panel: 2 Component (Y/Pb/Pr or YUV): Rear Panel: 1 (Monitor Out) Analog Audio L/R: Rear Panel: 2 Digital Audio Coaxial: Rear Panel: 1 Digital Audio Optical: Front Panel: 1, Rear Panel: 1 Headphone: Front Panel: 1 LFE/Subwoofer: Rear Panel: 1 Speaker Level Outputs: 7 pairs (Rear[...]

113 4.3 Scaling 58 5-Channel Stereo 30, 34, 62 7-Channel Stereo 62 AC Power Connections 45, 59 Advanced Settings 52–53, 57–58 Advanced Settings Menus 52, 57 Antenna T erminals 23, 43 Aspect Ratio 13, 19, 27–28, 34–36, 54, 57–58 Audio Equipment Connections 21–23, 43–44 Audio Mode Menus 46–47 Audio Surround Mode Chart 62 Auto Mode T u[...]

114 Depth measurement includes knobs and connectors. Height measurement includes feet and chassis. All specifications subject to change without notice. JBL and Logic 7 are registered trademarks, and JBL Cinema Vision, JBL Digital Link and On Screen Library (patent pending) are trademarks, of Harman International Industries, Incorporated. * “Dolby[...]

115 NO TES CVR700 OM 12/17/04 4:25 PM Page 115[...]

JBL Consumer Products 250 Crossways Park Drive, Woodbury New Y ork 11797 USA www .jbl.com © 2004 Harman International Industries, Incorporated Part No. CQX1A9142 12/04 RECYCLABLE   A Harman Inter national Company A Harman Inter national Company CVR700 OM 12/17/04 4:25 PM Page 116[...]