John Lewis JLDW 1225 Bedienungsanleitung

JLDW 1225 Dishwasher Instruction manual[...]

Important safety information It is most importa nt that this inst ruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always en sure that the book is supplied with the appliance in order that the new owner can get to [...]

For electrical and water connecti on carefully follow the instru ctions given in the specific paragraphs. Child safety • This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appl iance. • Keep all packaging well away from children. There is a risk of suffocation. • Ke[...]

Ecological hints To save water and energy and help protect the environment, we recommend that you follow these hints: • Ensure that the water softener is correctly adjusted. • Do not prewash under running water. • Select the washing progra mme to suit the nature and degree of the soil on the dishes. • Do not use more detergent, dishwasher s[...]

Contents For the user Important safety information 2 Description of the appliance 6 Visual signal 6 Control panel 7 Washing programmes 9 When the appliance is first installed 11 The water softener 11 Filling with salt 13 Filling with rinse ai d 13 Daily use 14 Loading cutlery and dis hes 14 Use of detergent 18 Multi tab function 19 Select and start[...]

Description of the appliance 1. Upper basket 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Rinse a id dispenser 6. Rating plate 7. Filters 8. Lower spray arm 9. Uppe r spray arm 10. Worktop Visual signal • When the washing progra mme starts, a red visual signal shows on the floor beneath the appliance door. Th is red signal r[...]

Control panel The controls are on th e top on the control panel. To operate with the controls, keep the appliance door ajar. 7 18 9 10 1. On/off button 2. Programme g uide 3. Display 4. Delay start button 5. Programme bu ttons 6. Energy save button 7. Multi tab button 8. Reset button 9. Indicators 10. Function buttons On/off button Press this butto[...]

Delay start button Press this button to de lay the start of the washing programme from 1 to 24 hours. Refer to 'Select and start a washing programme'. Programme buttons To select a washing programme, press one of these buttons until the display shows the programme number. Energy save button This function decreases the temperature in the d[...]

• To activate or deactivate the rinse aid dispenser (only with the Multi tab function activated). • To activate or deactivate the acoustic signals. Switch on the appli ance. The appliance is in s etting mode when: • The display shows two horizontal status bars. Switch on the appli ance. The appliance is n ot in settin g mode when: • The dis[...]

Programme Degree of soil and type of load Programme description Energy save function 2 70° Intensive Heavy soil. Crockery, cutlery, pots and pans. Prewash Wash 70 °C Rinses Dry YES (impact on washing programme) 3 60° Quick 2) Normal or light soil. Crockery and cutlery. Wash 60 °C Rinse YES (no impact on washing programme) 4 50° Economy 3) Norm[...]

Programme Programme time (minute) Energy (kWh) W ater (litre ) 5 55° On e hour 50 - 60 1.0 - 1.2 10 - 11 6 45° Glass 65 - 75 0.8 - 0.9 11 - 12 7 Rinse hold 14 0.1 4 The consumption values are intende d as a guide. They depend on the pressure and the temperature of the water, on the variatio ns of the power supply and on the quan tity of dishes. W[...]

Water hardness Adjustment of the water soften er Use of salt Clarke °TH mmol/l manually electronicall y 64 - 88 91 - 125 9.1 - 12.5 2 level 10 yes 53 - 63 76 - 90 7.6 - 8.9 2 level 9 yes 46 - 52 65 - 75 6.5 - 7.5 2 level 8 yes 36 - 45 51 - 64 5.1 - 6.4 2 level 7 yes 28 - 35 40 - 50 4.0 - 5.0 2 level 6 yes 23 - 27 33 - 39 3.3 - 3.9 2 level 5 yes 18[...]

Filling with salt Caution! Only use salt specifically designed for dishwas her use. All other types of salt, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, to remain on the bottom o[...]

4. Close the rinse aid dispenser. Press the lid until it locks into position. Adjusting the rinse aid dosage The factory set in position 3. You can set the rinse aid dosage betwee n position 1 (lowest dosage) and position 4 (highest dosag e). Turn the rinse aid selector ( 2 ) to increase or reduce the dosage. Daily use • Check if it's necess[...]

For washing in the dishwasher the following cutl ery and dishes are not suitab le: are of limited sui tability: • Cutlery with wooden, horn, china or mother- of-pearls handles. • Plastic items that are not heat resistant. • Older cutlery with glued parts that are not temperature resistant. • Bonded cutlery items or dishes. • Pewter or cop[...]

34 cm 9 x XXL 9 x 34 cm The cutlery basket Warning! Knives with long blades, stored in an upright po sition, are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. Forks and sp oons should be placed in the [...]

25 cm 14 cm 17[...]

Caution! Ensure that the spray arms can rotate free ly before you close the appliance door. Adjusting the height of the upper basket To load very large plates move the upper basket to the higher position. 24 cm 28 cm 30 cm 28 cm 25 cm 21 cm 22 cm 34 cm Moving the upper basket to the higher posi tion 1. Pull out the basket until it stops. 2. Careful[...]

Fill with detergent 20 30 M A X 1 2 3 4 + - 1. Press the release button ( 2 ) to open the lid ( 3 ) of the detergent dispenser. 2. Put the detergent in compartment ( 1 ). 3. If the washing programme has a prewash phase, put a small quantity of deterg ent on the inner side of the appliance door. 4. If you use de tergent tablets, put the tablet in co[...]

To deactivate the Multi tab function and use separately detergent, salt and rinse aid 1. Press the Multi tab button, the Multi tab indicator goes off. The function has bee n deactivated. 2. Fill the salt container and the rinse aid dispenser. 3. Adjust the water hardness to the highest level. 4. Perform a washing prog ramme without loading any dish[...]

2. Press the delay start button until the display shows the number of the selected washing programme. • The programme number flashes for a few seconds and then the time of the washing programme comes on. 3. Close the appliance door. The washin g programme starts automatically. Warning! Interrupt or cancel a washing programme in progress only if i[...]

• Water may appear on the sides and the door of the appliance as the stainless steel will eventually become cooler tha n the dishes. Maintenance and cleaning Cleaning the filters The filters must be checked and cle aned from time to time. Dirty filters will de grade the washing result. Warning! Before cleaning the filters ensure that the applianc[...]

C 9. Put the filter ( A ) into position in filter ( B ). Turn the f ilter ( A ) clockwise until it locks. Caution! Never use the appliance without filters . Incorrect repositioning and fitting of the filters will produce poor washing results and will result in damage to the appliance. Spray arms Caution! Never try to remove the upper spray arm. If [...]

Something not working The appliance does not start or it stops during operation. Certain problems are due to the lack of simple maintenance o r oversights, which can be solved with the help of the indications described in the table, without calling out an engineer. With some malfunctions, the displ ay shows an alarm code: • - The appliance does n[...]

Malfunction Possible cause Possible solution The mains plug is not connected in the mains socket. Connect the mains plug. The fuse in the fuse box is damaged. Replace the fuse. The delay start is set. • Cancel the delay start. • When the countdown is completed, the washing programme starts automaticall y. Once the checks have been carrie d out,[...]

The washing and drying results are not satisfactory There are streaks, whitish stains, or a bluish lay er on glasses and dishes. The rinse aid quanti ty is too high. Decrease the rinse aid quantity. Dry water drop stains on glasses and dishes. The rinse aid quanti ty is too low. Increase the rinse aid quant ity. The detergent can be the cause. Use [...]

Technical data Dimensions Width 596 mm Height 850 mm Depth 597 mm Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa) Electrical connection Information on the electrical connect ion (voltage, overall power and fuse) is given on the rati ng plate on the inner edge of the appliance door. Capacity Place settings 12 Installation Wa[...]

Removing the appliance worktop 1. Remove the applia nce work top by unscrewing the two rear retaining screws (1) 2. Pull the worktop from the back of the appliance (2). 3. Lift the worktop (3) and slide it out of the front slots. Insert the appliance once the levelling has been done. When inserting the appliance, ensure tha t the water inlet and dr[...]

Water connection Water inlet connection This appliance may be fed wi th either hot (maximum 60 °C) or cold water. Nevertheless we advise you u se a cold water supply. A hot water supply is not always efficient with heavily soiled crockery as it shortens the washing programmes a lot. For making the connection itself, the coupling nut fitted to the [...]

Our appliances are supplied with a security device to protect against the return of dirty water back into the appliance. If the spigot of your sink has a "no return valve" incorporated this can preve nt the correct draining of your appliance. We therefore advise you to remove it. When connecting the dra in hose to an under sink tra p spig[...]

Electrical connection The manufacturer accepts no liability for failure to observe the following safety precautions. Warning! Sa fety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to [...]

Repairs - after sales service Your appliance comes with a three year warranty. If it is not working correctly refer to "Something not working". If a fa ult occurs which you can not re solve through following the advice and information contained within this instruction manual, the next step is to contact our extended warranty administrator[...]

33[...]

34[...]

35[...]

John Lewis Partners hip 171 Victoria Street London SW1E 5NN www. johnlewis.com 117938510-E-152011 (Subject to change without notice)[...]