Juniper EX2200 Bedienungsanleitung

C ompl e t e Har dw ar e Guide f or EX2200 Etherne t S wit che s Published: 2011-11-15 Re vision 7 Cop yright © 2011, Juniper Network s, Inc.[...]

Juniper Netw orks, Inc. 1194 North Mathil da Av enue Sunnyv ale, Calif ornia 94089 US A 408-7 45-2000 www .juniper .net This pr oduct includes the Env oy SNMP Engine, dev eloped b y Epilogue T echnolog y , an Integr at ed Sy stems Compan y . Copyright © 1986-199 7 , Epilog ue T echnolog y Corpora tion. All rights reserv ed. T his program and it s [...]

Generall y speaking, the softw are license r estricts the manner in which you ar e permitted t o use the softwar e and may contain pr ohibitions against c ertain uses. T he software lic ense may sta te c onditions under which the license is automa ticall y terminat ed. Y ou should consul t the license f or further details. For compl ete pr oduct do[...]

Cop yright © 2011, Juniper Network s, Inc. iv[...]

T abl e of C ont ents A b o u t T h i s T o p i c C o l l e c t i o n .........................................x v H o w t o U s e T h i s G u i d e ...............................................x v List of EX Series Guides f or Junos OS R ele ase 11. 4 . . . . . . . . . . . . . . . . . . . . . . . . . xv D o w n l o a d i n g S o f t w a r e.....[...]

P art 2 Pl anning for S wit ch Install ation C h a p t e r 4 S i t e P r e p a r a t i o n ...................................................5 1 Site Pr epara tion Checklist for EX2200 S witches . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 G e n e r a lS i t e G u i d e l i n e s..............................................5 2 S i t e[...]

Connec ting an EX Series S witch t o a Netw ork for Out-of-Band Mana gement . . . 113 Connec ting an EX Series Swit ch to a Management Consol e . . . . . . . . . . . . . . . . . 115 Connec ting an EX Series S witch t o a Manag ement Consol e Using RJ-45 C o n s o l e P o r t ...............................................1 1 5 Connec ting an EX2200[...]

C h a p t e r 1 6 R a d i a t i o na n dL a s e rW a r n i n g s......................................1 6 1 La ser and LED Saf ety Guidelines and W arnings for EX Series Swit ches . . . . . . . . 161 G e n e r a lL a s e rS a f e t yG u i d e l i n e s...................................1 6 1 C l a s s 1 L a s e r P r o d u c t W a r n i n g .......[...]

List of Fig ur es P art 1 S witch and C omponents Ov erview and Specific ations C h a p t e r 1 E X 2 2 0 0 S w i t c h O v e r v i e w ...........................................3 Figure 1: Fr ont P anel of an EX2200 Swit ch with 48 Gigabit Ethernet P orts . . . . . . 6 Figure 2: Front Panel of an EX2200 S witch with 24 Gigabit Ethernet Ports . . [...]

F i g u r e 2 0 : A C P l u g T y p e s .............................................6 7 P art 3 Ins talling and Connec ting the S witch and S wit ch Components C h a p t e r 8 I n s t a l l i n g t h e S w i t c h ...............................................7 1 Figure 21: Att aching Rubber Feet to a Swit ch Chassis . . . . . . . . . . . . . . .[...]

F i g u r e 5 5 : E t h e r n e t C a b l e C o n n e c t o r ...................................1 2 0 Figure 56: C onnecting a Fiber-Optic Cabl e t o an Optical T ransc eiver Inst alled in a n E X S e r i e s S w i t c h .............................................1 2 2 Chapter 11 Perf orming Initial Config ura tion . . . . . . . . . . . . . . . [...]

Cop yright © 2011, Juniper Network s, Inc. xii Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

List of T abl es P art 1 S witch and C omponents Ov erview and Specific ations C h a p t e r 1 E X 2 2 0 0 S w i t c h O v e r v i e w ...........................................3 T a b l e 1 : E X 2 2 0 0 S w i t c h M o d e l s .........................................9 T able 2: Physic al Specifica tions of the EX2200 Swit ch Chassis . . . . . .[...]

T able 21: Cabinet Re quirements and Specifica tions for the Swit ch . . . . . . . . . . . . 59 C h a p t e r 7 P l a n n i n gP o w e r R e q u i r e m e n t s ......................................6 5 T able 22: A C P ower S upply El ectric al Specifica tions for EX2200 S wit ches . . . . . 65 T able 23: DC P ow er Suppl y Elec trical Specific at[...]

About T his T opic C oll ec tion • How t o Use This Guide on pa ge xv • List of EX Series Guide s for Junos OS R el ea se 11.4 on p age xv • Downl oading Soft ware on pa ge xvii • Documenta tion S ymbols K ey on pag e xviii • Documenta tion Feedback on pa ge xix • R equesting T echnical S upport on page xx How t o Use This Guide Compl e[...]

Description Titl e Component descriptions, sit e prepar ation, install ation, repl acement, and sa fet y and compliance inf ormation for EX4200 E thernet switches Compl ete Har dware Guide f or EX4200 Ethernet S witches Component descriptions, sit e prepar ation, install ation, repl acement, and sa fet y and compliance inf ormation for EX4 500 Ethe[...]

Description Titl e Junos ® OS f or EX Series Ethernet S witche s, Rel ease 11. 4: EX8200 Virtual Chassis Junos ® OS f or EX Series Ethernet S witche s, Rel ease 11. 4: Fibre Channel ov er Ethernet Junos ® OS f or EX Series Ethernet S witche s, Rel ease 11. 4: High A vailability Junos ® OS f or EX Series Ethernet S witche s, Rel ease 11. 4: Inte[...]

hav e a Juniper Netw orks user ac count. For inf ormation about obtaining an a ccount, se e http:/ / www .juniper .net/ entitlement/ setupAcc ountInfo .do . Documenta tion S ymbols K ey Notice Ic ons Description Meaning Icon Indica tes important f ea tures or instructions. Informa tional note Indica tes a situa tion that might re sult in l oss of d[...]

T ex t and Synt ax Conv entions Exampl es Description Conv ention stub <defa ult-metric metric >; Enclos e optional keyw ords or variabl es. < > (angle br acke ts) broadca st | multic ast ( string1 | string2 | string3 ) Indica tes a choic e between the mutuall y ex clusiv e keyw ords or variabl es on either side of the symbol. T he set [...]

R equesting T echnic al Support T echnical pr oduct support is av ailabl e through the Juniper Net work s T echnical Assistanc e Cent er (JT AC). If y ou are a cust omer with an activ e J-Care or JNA SC support contr act, or are c ov ered under warr anty , and need post-sal es technic al support, you can a cce ss our tool s and resourc es online or[...]

P ART 1 S wit ch and C omponent s Ov ervie w and S pecific a tions • EX2200 S witch Ov erview on pag e 3 • Component Des criptions on page 13 • Component S pecifica tions on page 21 1 Cop yright © 2011, Juniper Netw orks, Inc.[...]

Cop yright © 2011, Juniper Network s, Inc. 2 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 1 EX2200 S wit ch Ov ervie w • EX2200 S witches Har dware Ov erview on pag e 3 • EX2200 S witch Models on pa ge 8 • Chassis Ph ysical S pecifica tions for EX2200 S witches on p age 9 • EX2200 S witch Hardw are and CLI T erminol ogy Mapping on pag e 10 EX2200 S witches Har dwar e Overview Juniper Netw orks EX S eries Ethernet S witch[...]

• 12 (c ompact, f anle ss model) 24, or 48 buil t-in netw ork ports with 10/ 100/ 100BA SE-T Gigabit Etherne t connect ors • P ower o ver Etherne t (PoE or P oE+) on all netw ork ports (in PoE-c apable model s) Uplink Port s Each EX2200 swit ch ex cept the EX2200-C s witch model ha s four uplink ports tha t support 1-gigabit small f orm-fa ctor[...]

a standar d cable l ock . Se e “Mounting an EX2200 Swit ch on a Desk or Other L evel S urfac e” on pag e 75 . Po wer o ver E thernet (PoE) P orts EX2200 swit ches are a vailabl e in models with or without P oE/PoE+ c apability . Models that support P oE/P oE+ pro vide that support on all netw ork ports. P oE ports pro vide ele ctrical curr ent [...]

Figure 1: Fr ont P anel of an EX2200 Swit ch with 48 Gigabit E thernet Ports 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 0 1 2 SYS ALM SPD DX EN POE 3 46 47 Network por ts P or t status mode LEDs Mode button SFP uplink por ts Chassis status LEDs g027000 Figure 2: Fr[...]

Figure 3: Fr ont P anel of an EX2200-C Swit ch with 12 Gigabit E thernet Port s (PoE+) g021150 Network por ts Dual-purpose uplink por ts 0 Dual-purpose uplink por ts 1 Console por t USB por t Mini USB por t Management por t Figure 4: Fr ont P anel of an EX2200-C Swit ch with 12 Gigabit E thernet Port s (non-PoE) g021151 R ear P anel of an EX2200 Sw[...]

Figure 5: R ear Panel of an EX2200 S wit ch With an A C Po wer S upply g027001 USB por t Management Ethernet por t Console por t Protective ear thing terminal Air exhaust without f an (closed on non-P oE models) Air exhaust with fan AC po wer cord inlet ESD point EX2200-24-4G REV: X1 750-026464 REV: X3 MAC: 00:23:9C:oE:19:00 Mfg. Date 20090227 MADE[...]

T able 1: EX2200 S wit ch Models First Junos O S R elea se Maximum P oE Po wer A vailabl e Port s in Which PoE Is Av ailabl e Ac cess P orts Model 11.3R1 – – 12 Gigabit Ethernet EX2200-C-12T-2G 11.3R1 100 W All 12 ports 12 Gigabit Ethernet EX2200-C-12P-2G 10. 1R1 – – 24 Gig abit Ethernet EX2200-24T-4G 10. 1R1 405 W All 24 ports 24 Gig abit [...]

• Mounting an EX2200 S witch on pag e 74 • Installing and C onnecting an EX2200 S witch on pa ge 71 EX2200 S witch Har dware and CLI T erminol ogy Mapping This t opic describes the har dware t erms used in EX2200 swit ch documenta tion and the corr esponding terms used in the Juno s OS command line int erfa ce (CLI). S ee T able 3 on pag e 10 .[...]

T able 3: CLI Equiv alents of T erms Used in Documentation f or EX2200 S witches ( continue d) Additional Informa tion Item in Documenta tion V alue (as displ aye d in the CLI) Description (as displa yed in the CLI) Hardwar e Item (a s displa yed in the CLI) “EX2200 S witches Hardwar e Overview” on pag e 3 Built-in ne twork ports on the front p[...]

Cop yright © 2011, Juniper Network s, Inc. 12 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 2 C omponent De scriptions • Chassis S ta tus LEDs in EX2200 Swit ches on pag e 13 • Netw ork Port and Uplink P ort LEDs in EX2200 S witches on pa ge 14 • Manag ement Port LEDs in EX2200 S witche s on page 17 • P ower S upply in EX2200 S wit ches on page 18 • Cooling S yst em and Airfl ow in an EX2200 S witch on pa ge 19 Chassis S[...]

T able 4: Cha ssis Sta tus LEDs in an EX2200 S witch Sta te and Description Col or LED Label • On ste adily — The swit ch is functioning normall y . • Blinking— The switch is booting. • Off— The swit ch is off. Green S YS Ther e is no alarm. Unlit ALM Ther e is a minor alarm. Amber Ther e is a major alarm. R ed A major alarm (r ed) indi[...]

Figure 10: LEDs on the Uplink P orts and P ort Sta tus Mode LEDs in an EX2200 S witch Ex c ept the EX2200-C Swit ch Model g027007 0 1 2 SYS ALM SPD DX EN POE 3 P or t 1 P or t 2 P or t 3 Mode button Link/Activity LED Status LED P or t 0 P or t status mode LEDs Figure 11: P ort sta tus mode LEDs of the Dual-purpose uplink P orts of an EX2200-C S wit[...]

T able 6: S tatus LED on the Ne twork P orts, Uplink P orts, and Dual-Purpose Uplink P orts in EX2200 S witches Sta te and Description Port P arame ters Indica tes the speed . The speed indic at ors for ne twork ports ar e: • One blink per second— 10 Mbps • T wo blinks per sec ond—100 Mbps • Thr ee blinks per sec ond—1000 Mbps The spee [...]

R elat ed Documenta tion EX2200 S witches Har dware Ov erview on pag e 3 • • Config uring Gigabit Ethernet Int erfac es (CLI P roc edure) • Config uring Gigabit Ethernet Int erfac es (J-W eb Pr ocedure) Manag ement P ort LEDs in EX2200 Swit ches The mana gement port on an EX2200 swit ch has t wo LEDs that indic at e link/ activity and port st[...]

T able 8: S tatus LED on the Mana gement P ort on EX2200 S witches Sta te and Description Col or LED Indica tes the speed . The speed indic at ors are: • One blink per second— 10 Mbps • T wo blinks per sec ond—100 Mbps Green Sta tus R elat ed Documenta tion Connec ting an EX Series S witch t o a Netw ork for Out-of-Band Mana gement on pag e[...]

• Connec ting Earth Ground t o an EX Series S witch on pa ge 103 Cooling S yst em and Airflo w in an EX2200 S witch The c ooling syst em in EX2200 swit ches, ex cept EX2200-C, the c ompact, f anle ss models, consist s of two f ans along the r ear of the cha ssis that pro vide side-to-r ear cha ssis cooling. In the P oE models of these swit ches, [...]

Figure 15: Airfl o w Throu gh PoE Models of EX2200 S witches Ex cept the EX2200-C S witch Models g027008 Chassis rear Chassis front F ans F an Under normal opera ting conditions, the f ans opera te a t a modera te spe ed to r educe noise. T emperatur e sensors in the cha ssis monitor the t empera ture within the chassis. If any f an fails or if the[...]

CHAPTER 3 C omponent S pecific a tions • USB P ort Specifica tions f or an EX Series S witch on pa ge 21 • Mini-USB P ort Specifica tions f or an EX2200 Swit ch on pag e 22 • Netw ork Port C onnect or Pinout Informa tion for an EX2200 S witch on p age 23 • Consol e P ort Connect or Pinout Informa tion for an EX S eries S witch on pa ge 23 ?[...]

R elat ed Documenta tion See EX2200 S wit ches Hardwar e Overvie w on page 3 f or port loc ation. • • See R ear P anel of an EX3200 S witch f or port l ocation. • See R ear P anel of an EX3300 S witch f or port l ocation. • See R ear P anel of an EX4200 S wit ch for port l oca tion. • See Fr ont Panel of an EX4 500 Swit ch for port l oca [...]

Netw ork P ort Connec tor Pinout Inf ormation f or an EX2200 S witch A netw ork port on an EX2200 switch us es an RJ-45 c onnector t o conne ct to a devic e. The port use s an autosensing R J-45 connec tor t o support a 10/ 100/ 1000Base-T connec tion. T wo LEDs on the port indica te link/ activity on the port and the port sta tus. See “Ne twork [...]

NO TE: If your l aptop or PC doe s not have a DB-9 mal e connec tor pin and y ou want t o connect y our lapt op or PC directl y to an EX S eries swit ch, use a combina tion of the RJ-45 t o DB-9 femal e adapter supplied with the s witch and a USB t o DB-9 male adapt er . Y ou must provide the USB t o DB-9 male adapter . T able 12: EX S eries S witc[...]

The port use s an autosensing R J-45 connec tor t o support a 10/ 100Base-T c onnection. T wo LEDs on the port indica te link/ activity on the port and the administr ativ e sta tus of the port. See “Mana gement P ort LEDs in EX2200 S witches” on pag e 17 . T able 13 on pa ge 25 pro vides the pinout informa tion f or the RJ-45 c onnector f or th[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches V alue Specifica tion Ethernet S tandard EX-SFP-1GE-T Model Number 1000BA SE-T 10/100/ 1000 Mbps Rat e RJ-45 Connec tor T ype – T ransmitt er W avel ength – Minimum Launch P ow er – M[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1GE-SX Model Number 1000BASE-S X 1000 Mbps Ra te L C Connec tor T ype Dual Fiber Count 850 nm T ransmitt er W av elength –9 .5[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1GE-LX Model Number 1000BASE-L X 1000 Mbps Ra te L C Connec tor T ype Dual Fiber Count 1310 nm T r ansmitter W avel ength –9 .[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-GE10KT13R14 Model Number 1000BASE-B X-U 1000 Mbps Ra te L C Connec tor T ype Single Fiber Count 1310 nm T r ansmitter W avel eng[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-GE10KT14R13 Model Number 1000BASE-B X-D 1000 Mbps Ra te L C Connec tor T ype Single Fiber Count 1490 nm T ransmitt er W av eleng[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-GE10KT13R15 Model Number 1000B ASE-BX-U 1000 Mbps Ra te L C Connec tor T ype Single Fiber Count 1310 nm T r ansmitter W avel eng[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-GE10KT15R13 Model Number 1000B ASE-BX-D 1000 Mbps Ra te L C Connec tor T ype Single Fiber Count 1550 nm T ransmitter W avel engt[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-GE40KT13R15 Model Number 1000BASE-B X-U 1000 Mbps Ra te L C Connec tor T ype Single Fiber Count 1310 nm T r ansmitter W avel eng[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-GE40KT15R13 Model Number 1000BASE-B X-D 1000 Mbps Ra te L C Connec tor T ype Single Fiber Count 1550 nm T ransmitter W avel engt[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1GE-LX40K Model Number 1000BASE-L X 1000 Mbps Ra te L C Connec tor T ype Double Fiber Count 1310 nm T r ansmitter W avel ength ?[...]

T able 14: Optic al Interf ace S upport and Copper Int erfac e Support f or Gigabit Ethernet SFP T ransc eiver s in EX2200 Swit ches ex c ept EX2200-C Swit ches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1GE-LH Model Number 1000BASE-LH ( or 1000BA SE-ZX) 1000 Mbps Ra te L C Connec tor T ype Dual Fiber Count 1550 nm T ransmitter W [...]

T able 15: Optic al Interf ace Support f or F ast Etherne t SFP T ransceiv ers in EX2200 S wit ches ex c ept EX2200-C Swit ches V alue Specific ation Ethernet S tandard EX-SFP-1FE-FX Model Number 100BA SE-FX 100 Mbps Ra te L C Connect or T ype Dual Fiber Count 1310 nm T ransmitt er W avel ength –20 dBm Minimum Launch Po wer –1 4 dBm Maximum Lau[...]

T able 15: Optic al Interf ace Support f or F ast Etherne t SFP T ransceiv ers in EX2200 S wit ches ex c ept EX2200-C Swit ches (c ontinued) V alue Specific ation Ethernet S tandard EX-SFP-1FE-LX Model Number 100BASE-LX 100 Mbps Ra te L C Connect or T ype Dual Fiber Count 1310 nm T ransmitt er W avel ength –15 dBm Minimum La unch Pow er –8 dBm [...]

T able 15: Optic al Interf ace Support f or F ast Etherne t SFP T ransceiv ers in EX2200 S wit ches ex c ept EX2200-C Swit ches (c ontinued) V alue Specific ation Ethernet S tandard EX-SFP-FE20KT13R15 Model Number 100BA SE-BX-U 100 Mbps Ra te L C Connect or T ype Single Fiber Count 1310 nm T ransmitt er W avel ength 1550 nm R eceiver W av elength ?[...]

T able 15: Optic al Interf ace Support f or F ast Etherne t SFP T ransceiv ers in EX2200 S wit ches ex c ept EX2200-C Swit ches (c ontinued) V alue Specific ation Ethernet S tandard EX-SFP-FE20KT15R13 Model Number 100BA SE-BX-D 100 Mbps Ra te L C Connect or T ype Single Fiber Count 1550 nm T ransmitt er W av elength 1310 nm R eceiv er W av elength [...]

T able 15: Optic al Interf ace Support f or F ast Etherne t SFP T ransceiv ers in EX2200 S wit ches ex c ept EX2200-C Swit ches (c ontinued) V alue Specific ation Ethernet S tandard EX-SFP-1FE-LX40K Model Number 100BASE-L X40K 100 Mbps Ra te L C Connect or T ype Dual Fiber Count 1310 nm T ransmitt er W avel ength –5 dBm Minimum Launch P ower 0 dB[...]

T able 15: Optic al Interf ace Support f or F ast Etherne t SFP T ransceiv ers in EX2200 S wit ches ex c ept EX2200-C Swit ches (c ontinued) V alue Specific ation Ethernet S tandard EX-SFP-1FE-LH Model Number 100BA SE-LH (or 100BA SE-ZX) 100 Mbps Ra te L C Connect or T ype Dual Fiber Count 1310 nm T ransmitt er W avel ength –5 dBm Minimum Launch [...]

T able 16: Optic al Interf ace Support and C opper Interf ac e Support for SFP T r ansceiv ers in EX2200-C S witches V alue Specifica tion Ethernet S tandard EX-SFP-1GE-SX Model Number 1000BASE-S X 1000 Mbps Ra te L C Connec tor T ype Dual Fiber Count 850 nm T ransmitt er W av elength –9 .5 dBm Minimum Launch P ower –3 dBm Maximum Launch P ower[...]

T able 16: Optic al Interf ace Support and C opper Interf ac e Support for SFP T r ansceiv ers in EX2200-C S witches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1GE-SX-EXT Model Number Ext ended T emp SFP 1000BA SE-SX 1000 Mbps Ra te L C Connec tor T ype - Fiber Count - T ransmitt er W av elength - Minimum Launch P ower - Maximum L[...]

T able 16: Optic al Interf ace Support and C opper Interf ac e Support for SFP T r ansceiv ers in EX2200-C S witches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1FE-FX-EXT Model Number Ex tended T emp SFP 100BA SE-FX 1000 Mbps Ra te L C Connec tor T ype - Fiber Count - T ransmitt er W av elength - Minimum Launch P ower - Maximum La[...]

T able 16: Optic al Interf ace Support and C opper Interf ac e Support for SFP T r ansceiv ers in EX2200-C S witches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1FE-FX Model Number 100BASE-F X 100 Mbps Ra te L C Connec tor T ype Dual Fiber Count 1310 nm T r ansmitter W avel ength –20 dBm Minimum Launch Po wer –1 4 dBm Ma ximum [...]

T able 16: Optic al Interf ace Support and C opper Interf ac e Support for SFP T r ansceiv ers in EX2200-C S witches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1GE-LX Model Number 1000BASE-L X 1000 Mbps Ra te L C Connec tor T ype Dual Fiber Count 1310 nm T r ansmitter W avel ength –9 .5 dBm Minimum Launch P ower –3 dBm Maximum[...]

T able 16: Optic al Interf ace Support and C opper Interf ac e Support for SFP T r ansceiv ers in EX2200-C S witches ( continued) V alue Specifica tion Ethernet S tandard EX-SFP-1GE-LH Model Number 1000BASE-LH ( or 1000BA SE-ZX) 1000 Mbps Ra te L C Connec tor T ype Dual Fiber Count 1550 nm T ransmitter W avel ength –2 dBm Minimum Launch P ower 5 [...]

P ART 2 Pl anning f or S wit ch Inst all a tion • Site P repar ation on pag e 51 • Mounting and Cle aranc e Re quirements on pag e 57 • Cabl e Specifica tions on pag e 63 • Planning P ow er R equirements on pa ge 65 49 Copyright © 2011, Juniper Ne tworks, Inc.[...]

Cop yright © 2011, Juniper Network s, Inc. 50 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 4 Sit e P r epar a tion • Site P repar ation Checklist f or EX2200 S witches on pa ge 51 • General Sit e Guidelines on pag e 52 • Site El ectric al Wiring Guidelines on pag e 53 • Environment al Re quirements and Specific ations f or EX Series S wit ches on pag e 54 Site P repar ation Che cklist for EX2200 S witches The check list i[...]

T able 1 7: Site Pr epara tion Checklist ( continued) Dat e Perf ormed By For Mor e Information Item or T ask “Rack R equirement s for EX2200 S witches” on pag e 57 “Cabinet R equirements f or EX2200 S witches” on pag e 58 V erify tha t your ra ck or cabinet meets the minimum requir ements for the install ation of the swit ch. “Cle arance[...]

Efficient devic e opera tion requir es proper site pl anning and maintenanc e and proper la yout of the equipment, r ack or cabine t (if used), and wiring clos et. T o plan and cr eat e an ac ceptabl e opera ting environment f or your de vice and pre vent environment ally c aused equipment f ailure s: • K eep the are a around the cha ssis free fr[...]

T able 18: Sit e Elec trical W iring Guidelines (continue d) Guidelines Sit e Wiring Fa ctor T o reduce or elimina te r adio frequency int erfer ence (RFI) from y our site wiring, do the foll owing: • Use twist ed-pair cabl e with a good distribution of grounding c onductor s. • If you must e xc eed the rec ommended distance s, use a high-quali[...]

• Maintain ambient airfl ow f or normal switch oper ation. If the airfl ow is bl ock ed or restric ted , or if the intake air is t oo warm, the s witch might ov erhea t, le ading to the swit ch temper ature monit or shutting do wn the switch t o prot ect the hardw are components. T able 19 on pa ge 55 pro vides the requir ed envir onmental condit[...]

• Cle aranc e Re quirements f or Airflo w and Hardwar e Maintenanc e for EX4200 S wit ches • Cle aranc e Re quirements f or Airflo w and Hardwar e Maintenanc e for EX4500 S wit ches • Cle aranc e Re quirements f or Airflo w and Hardwar e Maintenanc e for an EX6210 S witch • Cle aranc e Re quirements f or Airflo w and Hardwar e Maintenanc e [...]

CHAPTER 5 Mounting and Cl e ar anc e R equir ements • Rack R equir ements for EX2200 S wit ches on page 57 • Cabinet R equir ements for EX2200 S witche s on page 58 • R equirements f or Mounting an EX2200 S witch on a Deskt op or W all on page 60 • Cle aranc e Re quirements f or Airflo w and Hardwar e Maintenanc e for EX2200 S witches on pa[...]

T able 20: Ra ck Requir ements and Specific ations f or the Swit ch (c ontinued) Guidelines Rack R equirement • Ensure tha t the rack c omplies with the standard define d for 19-in. r ack as defined in C abinets, Rack s, Panels, and A ssociate d Equipment (document number EIA-310–D) publishe d by the Ele ctronics Industry Associa tion ( http:/ [...]

T able 21: Cabine t Re quirements and Specific ations f or the Swit ch Guidelines Cabinet R equirement • Y ou can mount the swit ch in a cabinet tha t contains a 19-in. rack a s defined in Cabine ts, Rack s, Panels, and A ssociate d Equipment (document number EIA-310–D ) published by the Ele ctronics Industry Associa tion ( http:/ /www .eia.or [...]

R equirements f or Mounting an EX2200 S witch on a Desk top or W all Y ou can install the swit ch on a deskt op or wall. When choosing a l oca tion, allo w at l ea st 6 in. (15.2 cm) of cle aranc e betw een the front and back of the cha ssis and adjac ent equipment or wall s. Ensure tha t the wall ont o which the switch is inst alled is st able and[...]

Figure 1 7: Cl earanc e R equirements f or Airflo w and Hardwar e Maintenanc e for EX2200-C S witch Models g021163 Mounting brack et 6" (15.2 cm) for airflo w Rear Front 7.18" (26.9 cm) 8.7" (22.1 cm) Clearance required for maintenance Clearance required for maintenance 24" (61 cm) 6" (15.2 cm) 6" (15.2 cm) for airflo [...]

Figure 1 9: Airflo w Thr ough Non-PoE Model s of EX2200 Swit ches Ex cept EX2200-C S witch Models g027021 Chassis rear Chassis front F ans • If you ar e mounting an EX2200 switch in a r ack or cabine t with other equipment, or if you ar e placing it on the desk top or fl oor near other equipment, ensur e that the e xhaust from other equipment doe[...]

CHAPTER 6 Cabl e Spe cific a tions • Netw ork Cabl e Specifica tions for EX2200 S wit ches on page 63 Netw ork Cabl e Specific ations f or EX2200 S witches EX2200 swit ches hav e interf aces tha t use various t ypes of netw ork cable s. For instructions on c onnecting the swit ch to a net work f or out-of-band management using an Ethernet cabl e [...]

Cop yright © 2011, Juniper Network s, Inc. 64 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 7 Pl anning P o w er R equir ements • P ower S pecifica tions for EX2200 S witche s on page 65 • A C Po wer Cor d Specific ations f or EX2200 Swit ches on pag e 66 P ow er Specifica tions for EX2200 S witches This t opic describes the po wer suppl y elec trical specifica tions for EX2200 s witches. T able 22 on pa ge 65 pro vides the A [...]

NO TE: EX2200 swit ches with DC pow er supply do not pr ovide P oE. NO TE: For DC pow er supplies, we r ecommend tha t you pro vide at l ea st 3.5 A at 48 VDC and use a f acility cir cuit break er ra ted f or 10 A minimum. Doing so enable s you to oper at e the swit ch in any configur ation without upgr ading the pow er infra structure , and allo w[...]

T able 2 4: AC P ow er Cor d Specifica tions (c ontinued) Plu g T ype Plug St andards Ele ctrical Specific ations Country /Region PRC/3 GB 1002-1996 250 V AC, 10 A, 50 Hz China VIIG CEE (7) VII 250 V A C, 10 A, 50 Hz Europe ( exc ept Ital y , S witzerland , and United Kingdom) IND/3 IS 1293 250 V AC, 10 A, 50 Hz India IL/3G SI 32/1971 250 V A C, 10[...]

Cop yright © 2011, Juniper Network s, Inc. 68 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

P ART 3 Inst alling and C onne cting the S wit ch and S wit ch C omponent s • Installing the S witch on pa ge 71 • Installing S witch C omponents on pag e 99 • Connec ting the Swit ch on pag e 103 • P erforming Initial Config ura tion on page 125 69 Copyright © 2011, Juniper Net works, Inc.[...]

Cop yright © 2011, Juniper Network s, Inc. 70 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 8 Inst alling the S wit ch • Installing and C onnecting an EX2200 S witch on pa ge 71 • Unpacking an EX2200 S witch on pa ge 72 • P arts Invent ory (P acking List) for an EX2200 S wit ch on page 73 • Mounting an EX2200 S witch on pag e 74 • Mounting an EX2200 S witch on a Desk or Other L ev el Surfa ce on pag e 75 • Mounting an [...]

• “Mounting an EX2200 S witch On or Under a Desk Using S crew s” on page 78 (using the desk/ wall mounting scr ews) • “Mounting an EX2200 S witch Using the Magne t Mount” on page 94 (using the separa tel y order abl e magnet sheet) 3. Follo w instructions in “C onnecting Earth Ground t o an EX Series S witch” on pag e 103 . 4. Foll [...]

6. V erify the chassis c omponents rec eived a gainst the packing list incl uded with the swit ch. An invent ory of parts pro vided with the swit ch is provide d in “Parts In vent ory (P acking List) for an EX2200 S wit ch” on pag e 73 . 7 . Sav e the shipping carton and pa cking mat erials in ca se you need t o mov e or ship the swit ch la ter[...]

T able 25: P arts List f or EX2200 S witches ( continued) Quantity Component 1 RJ-45 c able and R J-45 to DB-9 serial port adapt er - Cabl e guard and 3 number-8 Phillips truss-hea d screw s (EX2200-C models only and separ at ely or derabl e) 1 Quick Start ins talla tion instructions 1 Juniper Netw orks Pr oduct W arr anty 1 End User License A gree[...]

T able 26: EX2200 S wit ch Mounting Methods (c ontinued) Comments S witch Model Mounting Me thod • On a wall b y using screws or s eparat ely or derabl e wall-mount kit • On a wall b y using screws • EX2200 • EX2200-C W all mount On or under a surfa ce made of f errous mat erial using the separa tel y order able magne t sheet EX2200-C Magne[...]

• Pla ce the desk in its permanent l oca tion, allo wing adequa te cl ear ance f or airflo w and maintenanc e, and secur e it to the buil ding structure . • R ead “Gener al Saf ety Guidelines and W arnings” on pag e 155 , with particular a tt ention to “Cha ssis Lifting Guidelines for EX2200 S witches” on pag e 166 . NO TE: Do not bl oc[...]

Figure 22: A tt aching a Cabl e Guard to an EX2200-C S witch g021161 6. ( Optional; applies only t o EX2200-C models) A ttach the st andard cabl e lock t o the security sl ots on the both sides of the s witch: a. R ope the cabl e to a desk or a r ack and set the l ock to unl ocked position. b. Insert the l ock into one of the se curity sl ot on you[...]

Mounting an EX2200 S witch On or Under a Desk Using S cre ws This t opic applies onl y to the EX2200-C swit ch, the compac t, fanl ess model. Y ou can mount an EX2200-C switch on or under a de sk or other lev el surfa ce by using the fle xible mounting sl ots on the bott om of the chassis t o secur e the switch. Bef ore mounting the swit ch on or u[...]

Figure 2 4: Mea surements f or Installing Mounting Scr ews f or EX2200-C S witch g021164 9.52" (22.1 cm) 4.37" (11.0 cm) 3.98 " (10.13 cm) A B P C 3.98 " (10.13 cm) .536 " (1.36 cm) a. Drill hole A and ins tall a mounting screw . b. Drill hol e B 9 .52 in. (22. 1 cm) on a le vel line from hol e A and install a mounting scre[...]

Figure 25: Mounting the EX2200-C S witch On or Under a Desk Using Scr ews g021157 4. ( Optional) Att ach the cabl e guard t o prot ect cabl e conne ctions: a. Use the 3 truss-head scr ews t o at tach the cabl e guar d to the bott om of the chassis. b. Use the thumbscr ews t o tighten or l oosen the guar d to all ow y ou to insert cabl es. See Fig u[...]

Figure 26: A tt aching a Cabl e Guard to an EX2200-C S witch g021161 5. (Optional) A ttach the st andard cabl e l ock to the securit y slots on the both side s of the swit ch a. R ope the cabl e to a desk or a r ack and set the l ock to unl ocked position. b. Insert the l ock into one of the se curity sl ot on your chassis and s et the lock t o the[...]

NO TE: Mounting bra ckets and scr ews ar e provide d with all EX2200 switch models ex c ept the EX2200-C model. For EX2200-C model, mounting brack ets and screw s are separ at ely or derabl e. Y ou can mount an EX2200 switch e xc ept the EX2200-C swit ch model on four posts of a four-pos t rack b y using the mounting brack ets pr ovided with the se[...]

CA UTION: If you ar e mounting multipl e units on a rack, mount the he aviest unit at the bot tom of the ra ck and mount the other units from the bott om of the rack t o the top in decr easing or der of the weight of the units. T o mount the swit ch on two posts of a r ack: 1. R emove the s witch fr om the shipping carton (se e “Unpacking an EX22[...]

Figure 2 9: Mounting the Swit ch on T wo P osts of a Rack g027020 Mounting rack Mounting brack et 8. Hav e a sec ond person secur e the switch t o the rack b y using the appropria te scr ews. Tight en the screw s. 9 . Ensure tha t the switch cha ssis is l evel b y verifying tha t all screw s on one side of the ra ck are aligned with the scre ws on [...]

Bef ore mounting the swit ch on four posts of a r ack: • V erify that the site mee ts the requir ements described in “Sit e Prepar ation Che cklist for EX2200 S wit ches” on pag e 51 . • Pla ce the ra ck in its permanent loc ation, all owing ade quat e cle arance f or airfl ow and maintenanc e, and secur e it to the buil ding structure . ?[...]

Figure 30: A tt aching the Front Br acke t to the Side-Rail Br ack et 3. Pla ce the swit ch on a fla t, stabl e surfac e. 4. Align the side-r ail brack ets al ong the side panels of the s witch cha ssis. Align the two hole s in the rear of the side-r ail brack ets with the t wo hol es on the rear of the side panel. 5. Insert Phillips 4x6-mm fla t-h[...]

Figure 32: Mounting the S witch to the Fr ont Post s of a Rack g004477 Side-rail brack et Switch F ront brack et 8. Hav e a sec ond person secur e the front of the swit ch to the r ack by using the appr opriat e scre ws for y our ra ck. 9 . Slide the rear br ack ets int o the side-rail bra cket s. See Figur e 33 on page 87 . Figure 33: Sliding the [...]

• Mounting an EX2200 S witch in a R ece ssed Po sition in a Rack or Cabinet on pa ge 88 • Rack-Mounting and C abinet-Mounting W arnings on page 167 Mounting an EX2200 S witch in a R ec essed P osition in a Rack or C abinet Y ou can mount an EX2200 switch e xc ept the EX2200-C swit ch model in a rack or c abinet such that the s witch is r ecesse[...]

Bef ore mounting the swit ch on a wall: • V erify that the site mee ts the requir ements described in “Sit e Prepar ation Che cklist for EX2200 S wit ches” on pag e 51 . • R ead “Gener al Saf ety Guidelines and W arnings” on pag e 155 , with particular a tt ention to “Cha ssis Lifting Guidelines for EX2200 S witches” on pag e 166 . [...]

• Use holl ow wall anchor s ra ted t o support up to 75 lb (34 kg) if y ou are not inserting the mounting scre ws direc tly int o wall studs. • T urn the scre ws onl y part way in, l ea ving about 1/ 4 in. (6 mm) dist ance bet ween the head of the scr ew and the wall. a. Install scr ew A . b. Inst all screw B 18. 68 in. ( 47 .4 cm) fr om screw [...]

Figure 36: Mounting the S witch on a W all g020723 Hang attached brack ets on wall-mounted scre ws. F ront panel Rear panel Baffle for P oE Models (EX2200-24P and EX2200-48P) Mounting an EX2200-C S witch on a W all Y ou can mount an EX2200-C switch, the c ompact, f anle ss model, on a wall by using the fle xible mounting sl ots on the bott om of th[...]

T o mount the swit ch on a wall: 1. R emove the s witch fr om the shipping carton (se e “Unpacking an EX2200 S witch” on pag e 72 ). 2. Drill three hol es A , B , and C on the wall a s shown in Fig ure 37 on pag e 92 . Figure 3 7: Measur ements for Inst alling Mounting Scre ws f or the EX2200-C S witch g021164 9.52" (22.1 cm) 4.37" (1[...]

Figure 38: Mounting the EX2200-C S witch on a W all Using Scre ws g021159 5. (Optional) A ttach the optional c able g uard to pr otec t cabl e connections: a. Use the 3 truss-head scr ews t o at tach the cabl e guar d to the bott om of the chassis. b. Use the thumbscr ews t o tighten or l oosen the guar d to all ow y ou to insert cabl es. See Fig u[...]

Figure 40: S ecuring the EX2200-C S witch Using S ecurity Sl ots g021160 Security slot Security cable R elat ed Documenta tion Connec ting AC P ow er to an EX2200 S wit ch on page 109 • • Connec ting DC Po wer t o an EX2200 Swit ch on pag e 110 • Connec ting and Configuring an EX S eries S witch (CLI P roc edure) on pag e 129 • Connec ting [...]

• Pla ce the desk in its permanent l oca tion, allo wing adequa te cl ear ance f or airflo w and maintenanc e, and secur e it to the buil ding structure . • R ead “Gener al Saf ety Guidelines and W arnings” on pag e 155 , with particular a tt ention to “Cha ssis Lifting Guidelines for EX2200 S witches” on pag e 166 . • R emove the s w[...]

Figure 41: Mounting an EX2200-C S witch Using Magne t Mount g021158 Magnet mount Magnetic surface 3. (Optional) A ttach the c able g uard to pr otec t cabl e connections: a. Use the 3 truss-head scr ews t o at tach the cabl e guar d to the bott om of the chassis. b. Use the thumbscr ews t o tighten or l oosen the guar d to all ow y ou to insert cab[...]

Figure 4 2: Att aching a Cabl e Guard to an EX2200-C S witch g021161 4. ( Optional) Att ach the standard c able l ock to the s ecurity sl ots on the both sides of the swit ch a. R ope the cabl e to a desk or a r ack and set the l ock to unl ocked position. b. Insert the l ock into one of the se curity sl ot on your chassis and s et the lock t o the[...]

Cop yright © 2011, Juniper Network s, Inc. 98 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 9 Inst alling S wit ch C omponent s • Installing a T ransceiv er in an EX Series S wit ch on page 99 Installing a T ransceiv er in an EX Serie s Swit ch The tr ansceiv ers f or EX Series swit ches are hot-r emovabl e and hot-insertabl e field-r eplac eabl e units (FRUs): Y ou can remo ve and r eplac e them without powering off the swit ch[...]

T o install a tr ansceiver in an EX S eries swit ch: CA UTION: T o avoid el ectr ostatic dischar ge (E SD) damag e to the tr ansceiver , do not touch the c onnector pins a t the end of the transc eiver . 1. R emove the tr ansceiv er from its ba g. 2. Check to s ee whether the transc eiver is c ov ered b y a rubber saf ety cap . If it is not, co ver[...]

R elat ed Documenta tion • R emoving a T ransceiv er from an EX Serie s Swit ch on pag e 137 • Connec ting a Fiber-Optic Cable t o an EX Series S witch on pag e 121 • Optical Int erfac e Support in EX2200 S witche s on page 25 • Optical Int erfac e Support in EX3200 S witche s • Optical Int erfac e Support in EX3300 S witche s • Optical[...]

Cop yright © 2011, Juniper Network s, Inc. 102 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 10 C onne cting the S wit ch • Connec ting Earth Ground t o an EX Series S witch on pa ge 103 • Connec ting AC P ow er to an EX2200 S wit ch on page 109 • Connec ting DC Po wer t o an EX2200 Swit ch on pag e 110 • Connec ting an EX Series S witch t o a Netw ork for Out-of-Band Mana gement on pag e 113 • Connec ting an EX Series S [...]

CA UTION: Using a grounding cabl e with an incorr ectl y att ached lug c an damag e the switch. Follo w the proc edure tha t applies to y our switch: • Connec ting Earth Ground t o an EX2200, EX3200, or EX3300 S witch on pag e 104 • Connec ting Earth Ground t o an EX4500 S witch on pag e 105 • Connec ting Earth Ground t o an EX6210 Swit ch on[...]

3. Sec ure the grounding l ug to the pr otec tive earthing t erminal with the wa shers and scre ws. 4. Dr ess the grounding cabl e and ensure tha t it does not t ouch or block ac cess t o other swit ch components and tha t it does not drape wher e people c ould trip o ver it. Connec ting Earth Ground t o an EX4500 S witch The pr otec tive earthing [...]

3. Sec ure the grounding l ug to the pr otec tive earthing t erminal with screw s. 4. Dr ess the grounding cabl e and ensure tha t it does not t ouch or block ac cess t o other swit ch components and tha t it does not drape wher e people c ould trip o ver it. Connec ting Earth Ground t o an EX6210 Swit ch The pr otec tive earthing t erminal is loc [...]

• Grounding c able f or your EX6210 swit ch (not pro vided)— The grounding cabl e must be the same ga ge a s the power f eed c ables and a s permitt ed by the l ocal c ode. • Grounding l ug for y our grounding c able (pro vided). Se e Grounding Cabl e and Lug Specific ations f or EX6200 Swit ches. • T wo ¼-20x0 .5-in. screw s and two fl at[...]

3. Sec ure the grounding l ug to the pr otec tive earthing t erminal with the wa shers and scre ws. 4. Dr ess the grounding cabl e and ensure tha t it does not t ouch or block ac cess t o other swit ch components and tha t it does not drape wher e people c ould trip o ver it. Connec ting Earth Ground t o an EX8216 Swit ch Ther e are tw o prot ectiv[...]

• Connec ting DC Po wer t o an EX4200 S witch • Connec ting AC P ow er to an EX4500 S witch • Connec ting DC Po wer t o an EX4500 S witch • Connec ting AC P ow er to an EX6200 S wit ch • Connec ting DC Po wer t o an EX6200 Swit ch • Connec ting AC P ow er to an EX8200 S wit ch • Connec ting DC Po wer t o an EX8200 Swit ch • General [...]

W ARNING: Ensure tha t the pow er cord doe s not drape where peopl e can trip on it or block a cce ss to swit ch components. 3. Insert the coupl er end of the pow er cor d into the A C pow er cord inl et on the r ear panel. 4. P ush the power c ord int o the slot in the adjus tment nut of the power c ord r etainer clip. T urn the nut until it is ti[...]

W ARNING: DC-pow ered s witches are int ended for ins talla tion only in a restric ted ac cess l oca tion. Bef ore you be gin connecting DC po wer t o the switch, ensur e that y ou hav e connect ed the swit ch chassis t o earth ground . CA UTION: Befor e you c onnect pow er to the swit ch, a licensed el ectrician must at tach a cabl e lug t o the g[...]

T o connec t DC power t o the swit ch: 1. Ensure tha t the input circuit br eaker is open s o that the cabl e l eads will not bec ome activ e while y ou are conne cting DC pow er . NO TE: The DC po wer suppl y in the swit ch has four t erminals l abeled A+, B+, A –, and B– for conne cting DC pow er source c ables l abeled positive (+) and neg a[...]

b. S ecure the ring l ug of the nega tive (–) DC po wer sour ce cabl e t o the A– or B– terminal on the DC po wer suppl y . c. Tight en the screw s on the pow er supply t erminals until snug using the scr ewdriv er . Do not ov ertighten—appl y betw een 8 in.-lb (0 . 9 Nm) and 9 in.-lb (1.02 Nm) of tor que to the scr ews. • T o connec t th[...]

Figure 50: E thernet Cabl e Connec tor T o connec t a device t o a netw ork for out-of-band manag ement (see Figur e 51 on page 114 ): 1. Connec t one end of the Ethernet cabl e to the mana gement port (l abeled MGMT ) on the devic e. For the loc ation of the MGMT port on diff erent de vices: • See “EX2200 S wit ches Hardwar e Overvie w” on p[...]

• Manag ement Port C onnector P inout Informa tion for an EX3300 S witch • Manag ement Port C onnector P inout Informa tion for an EX4200 S witch • Manag ement Port C onnector P inout Informa tion for an EX4500 S wit ch • Manag ement Port C onnector P inout Informa tion for an EX6200 S witch • Manag ement Port C onnector P inout Informa t[...]

T o connec t the device t o a management c onsol e (see Figure 53 on pa ge 116 and Figur e 54 on pag e 117 ): 1. Connec t one end of the Ethernet cabl e into the c onsole port (l abel ed CON or CONS OLE ) on the device . For the loc ation of the C ON/C ONSOLE port on diff erent devic es: • See “EX2200 S wit ches Hardwar e Overvie w” on page 3[...]

Figure 54: C onnecting an EX S eries S witch Dire ctl y to a Manag ement Consol e g020570 Laptop CPU T o Console port (on the switch) Connec ting an EX2200 S witch t o a Management C onsol e Using Mini-USB T ype-B Consol e Port This se ction describes the proc ess of conne cting an EX2200-C swit ch to the manag ement consol e using the Mini-USB T y[...]

• P erform the initial setup and c onfigura tion of the swit ch. See “C onnecting and Config uring an EX Series S witch ( CLI Proc edure)” on pa ge 129 or “C onnecting and Config uring an EX Series S witch ( J-W eb Pr ocedur e)” on page 131 . Ensure tha t you ha ve the f ollo wing parts av ailabl e befor e you begin t o connec t the switc[...]

4. P ress Ent er when you see the f ollo wing messag e: Switch baud rate to 115200 bps and press Enter. The l oader> prompt r eappear s. 5. Sav e the new serial c onsole spee d: loader> sav e Pr ess Enter . The serial cons ole speed is no w set t o 115200 baud. 6. Boot the soft ware: loader> boot The boot pr ocess pr oceeds a s normal and [...]

The modem sends an OK r esponse to v erify that it c an communica te suc cessfull y with the COM port on y our deskt op or notebook c omputer . 6. T o configure the modem t o answ er a call on the first ring, type a ts0=1 a t the prompt. Pr ess Enter . 7 . T o configure the modem t o ac cept modem-contr ol D TR signals, type a t&d1 at the promp[...]

3. Connec t one end of the cabl e to the cons ole port (l abeled C ON or CONS OLE ) on the swit ch. For the loc ation of the c onsole port on diff erent EX S eries swit ches: • See “EX2200 S wit ches Hardwar e Overvie w” on page 3 . • See R ear P anel of an EX3200 S witch. • See R ear P anel of an EX3300 S witch. • See R ear P anel of a[...]

T o connec t a fiber-optic cable t o an optical transc eiver inst alled in an EX S eries swit ch: W ARNING: Do not l ook directl y into a fiber-optic tr ansceiv er or into the ends of fiber-optic cabl es. Fiber-optic transc eivers and fiber-optic c ables c onnect ed to tr ansceiv ers emit la ser light that c an damage y our eye s. 1. If the fiber-o[...]

• Optical Int erfac e Support in EX4500 S wit ches • Optical Int erfac e Support in EX6200 S witche s • Optical Int erfac e Support in EX8200 S witche s 123 Copyright © 2011, Juniper Netw orks, Inc. Chapter 10: C onnecting the S witch[...]

Cop yright © 2011, Juniper Network s, Inc. 124 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 11 P erf orming Initial C onfig ur a tion • EX2200 S witch Def aul t Configur ation on pa ge 125 • Connec ting and Configuring an EX S eries S witch (CLI P roc edure) on pag e 129 • Connec ting and Configuring an EX S eries S witch (J-W eb Pr ocedur e) on page 131 EX2200 S witch De faul t Config ura tion Each EX S eries switch is pr o[...]

} file me ssages { any notice; authoriza tion info; } file int erac tive-commands { inter active-c ommands any; } } commit { fa ctory-set tings { rese t-chassis-lc d-menu; rese t-virtual-chassis-config uration; } } } interf aces { ge-0 /0/ 0 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/1 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/2 [...]

} ge-0 /0/ 8 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/9 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/10 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/11 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/12 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/13 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/14 { unit 0[...]

ge-0 /0/19 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/20 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/21 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/22 { unit 0 { famil y ethernet-s witching; } } ge-0 /0/23 { unit 0 { famil y ethernet-s witching; } } ge-0 / 1/0 { unit 0 { famil y ethernet-s witching; } } ge-0 / 1/ 1 { unit 0[...]

} } ethernet-s witching-options { storm-c ontrol { interf ace all; } } R elat ed Documenta tion Config ura tion Files T erms • • Connec ting and Configuring an EX S eries S witch (CLI P roc edure) on pag e 129 • Connec ting and Configuring an EX S eries S witch (J-W eb Pr ocedure) on p age 131 • Understanding C onfigur ation Fil es for EX S[...]

• St op bits— 1 • DCD sta te—Disr egard T o connec t and configur e the switch fr om the consol e using the CLI: 1. Connec t the consol e port to a l aptop or PC using the R J-45 to DB-9 serial port a dapter . The R J-45 cabl e and RJ-45 t o DB-9 serial port adapt er are supplied with the swit ch. For the loc ation of the c onsole port on d[...]

• Configur e in-band manag ement . In this scenario you ha ve the f ollo wing two options: • Use the def ault VLAN. • Cre at e a new VLAN—If you s elect this option, y ou are pr ompted t o specify the VLAN name, VLAN ID , management IP a ddress, and def aul t gat ew ay . Selec t the ports tha t must be part of this VLAN. • Configur e out-[...]

This t opic describes the J-W eb procedur e. NO TE: Bef ore you begin the c onfigur ation, enabl e a DHCP client on the manag ement PC you will c onnect to the s witch so tha t the PC can obtain an IP address dynamic ally . NO TE: R ead the f ollo wing steps bef ore you be gin the configur ation. Y ou must compl et e the initial configur ation usin[...]

• EX4500 swit ch—Connec t the cabl e to the port l abeled MGMT on the fr ont panel of the swit ch. • EX8200 swit ch—Connect the c able t o the port label ed MGMT on the S witch F abric and R outing Engine (SRE) module in sl ot SRE0 in an EX8208 swit ch or on the R outing Engine (RE) module in sl ot RE0 in an EX8216 swit ch. Thes e ports are[...]

8. Click Nex t . 9 . On the Manag e Ac cess pag e, you ma y sel ect options to enabl e T elnet, SSH, and SNMP service s. For SNMP , you can c onfigure the re ad communit y , loc ation, and c ontact. 10. Click Ne xt . The S ummary screen displ ays the c onfigure d settings. 11. Click Finish . The c onfigura tion is commit ted a s the activ e switch [...]

P ART 4 R emo ving S wit ch C omponents • R emoving S witch C omponents on pag e 137 135 Copyright © 2011, Juniper Netw orks, Inc.[...]

Cop yright © 2011, Juniper Network s, Inc. 136 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 12 R emo ving S wit ch C omponents • R emoving a T ransceiv er from an EX Serie s Swit ch on pag e 137 • Disconne cting a Fiber-Optic Cabl e from an EX Series S wit ch on page 139 R emoving a T ransc eiver from an EX S eries S witch The tr ansceiv ers f or EX Series swit ches are hot-r emovabl e and hot-insertabl e field-r eplac eabl e [...]

W ARNING: Do not l ook directl y into a fiber-optic tr ansceiv er or into the ends of fiber-optic cabl es. Fiber-optic transc eivers and fiber-optic c ables connec ted t o transc eivers emit l aser light tha t can damag e your ey es. W ARNING: Do not l eav e a fiber-optic transc eiver unc over ed ex cept when inserting or remo ving a cabl e. The ru[...]

Figure 58: R emoving a T ransc eiver from an EX S eries S witch R elat ed Documenta tion Installing a T ransceiv er in an EX Series S wit ch on page 99 • • Optical Int erfac e Support in EX2200 S witche s on page 25 • Optical Int erfac e Support in EX3200 S witche s • Optical Int erfac e Support in EX3300 S witche s • Optical Int erfac e [...]

T o disconnec t a fiber-optic cabl e from an optical tr ansceiv er install ed in the switch: 1. Disabl e the port in which the transc eiver is install ed by issuing the c ommand: [edit interfaces] user@switch# set interface-name disabl e W ARNING: Do not l ook directl y into a fiber-optic tr ansceiv er or into the ends of fiber-optic cabl es. Fiber[...]

P ART 5 S wit ch and C omponent Maint enanc e • R outine Maintenanc e on page 143 141 Copyright © 2011, Juniper Net works, Inc.[...]

Cop yright © 2011, Juniper Network s, Inc. 142 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 13 R outine Maint enanc e • Maintaining Fiber-Optic Cabl es in EX Serie s Swit ches on pag e 143 Maintaining Fiber-Optic Cabl es in EX S eries S witches Fiber-optic cabl es conne ct to optic al transc eivers tha t are install ed in EX S eries switche s. T o maintain fiber-optic cabl es: • When y ou unplug a fiber-optic cabl e from a tr [...]

• Optical Int erfac e Support in EX2200 S witche s on page 25 • Optical Int erfac e Support in EX3200 S witche s • Optical Int erfac e Support in EX3300 S witche s • Optical Int erfac e Support in EX4200 S wit ches • Optical Int erfac e Support in EX4500 S wit ches • Optical Int erfac e Support in EX6200 S witche s • Optical Int erfac[...]

P ART 6 R eturning Har dw ar e • R eturning the S witch or S witch C omponents on pag e 147 145 Copyright © 2011, Juniper Ne tworks, Inc.[...]

Cop yright © 2011, Juniper Network s, Inc. 146 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 14 R eturning the S wit ch or S wit ch C omponent s • R eturning an EX2200 S witch or C omponent for R epair or R eplac ement on page 147 • Loc ating the S erial Number on an EX2200 Swit ch or Component on pa ge 148 • Cont acting Cust omer Support to Obt ain Re turn Mat erials Authoriza tion for EX S eries S witches on pa ge 149 • P[...]

Loc ating the S erial Number on an EX2200 S witch or C omponent If you ar e returning an EX2200 s witch or hardw are component t o Juniper Netw orks f or repair or r eplac ement, you must l oca te the serial number of the s witch or component. Y ou must provide the serial number t o the Juniper Netw orks T echnical A ssistance C enter (JT AC) when [...]

Figure 5 9: Loc ation of the Serial Number ID Label on EX2200 S witches g02701 1 SN: CT0209520001 Serial number ID label EX2200-24-4G REV: X1 750-026464 REV: X3 MAC: 00:23:9C:oE:19:00 Mfg. Date 20090227 MADE IN CHINA R elat ed Documenta tion Cont acting Cust omer Support to Obt ain Re turn Mat erials Authoriza tion for EX S eries S witches on pa ge[...]

• Detail s of the fail ure or probl em • T ype of activity being perf ormed on the swit ch when the probl em occurr ed • Config ura tion data displ ay ed by one or mor e show commands Y ou can conta ct JT A C 24 hours a da y , sev en day s a week on the W eb or by tel ephone: • Ca se Manager a t CS C: http:/ / www .juniper .net/ cm/ • T e[...]

Bef ore you be gin, ensure that y ou hav e retrie ved the original shipping cart on and packing mat erials. C ontact y our JT A C represent ativ e if you do not hav e these ma terials, t o le arn about appro ved packing ma terial s. See “C ontacting Cus tomer Support t o Obtain R eturn Mat erials Authoriza tion f or EX Series S witches” on pa g[...]

12. Clo se the top of the car dboard c arton and seal it with pa cking tape. 13. W rite the RMA number on the e xt erior of the carton t o ensure pr oper tracking. P acking S witch C omponents for Shipping T o pack and ship swit ch components: • Pla ce individual component s in antistatic b ags. • Ensure tha t the components ar e adequa tel y p[...]

P ART 7 Sa f e ty Inf orma tion • General Sa f ety Informa tion on pag e 155 • Radia tion and La ser W arnings on pa ge 161 • Install ation and Maint enance Sa fet y Informa tion on pag e 165 • P ower and El ectric al Saf ety Inf ormation on pa ge 179 153 Copyright © 2011, Juniper Netw orks, Inc.[...]

Cop yright © 2011, Juniper Network s, Inc. 154 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 15 Gener al Sa f et y Inf orma tion • General Sa f ety Guidelines and W arnings on pag e 155 • Definitions of Sa fet y W arning L evel s on page 156 • Fire Sa fe ty R equirements on pa ge 158 • Qualified P ersonnel W arning on page 159 • W arning Sta tement f or Norway and S w eden on page 160 General S af ety Guidelines and W arn[...]

• Nev er install ele ctrical jack s in wet l oca tions unle ss the jacks ar e specificall y designed for w et envir onments. • Opera te the de vice onl y when it is properl y grounded . • Ensure tha t the separa te pr otec tive earthing t erminal pro vided on this device is permanentl y connect ed to e arth. • R eplac e fuses onl y with fus[...]

CA UTION: Y ou need to observe the spe cified guidelines to a void minor injury or discomf ort to y ou or sever e damage t o the devic e. W ARNING: This s ymbol alerts y ou to the risk of per sonal injury from a la ser . W ARNING: This s ymbol means danger . Y ou are in a situa tion that c ould c ause bodil y injury . Befor e you w ork on any equip[...]

elé ctricos, e c om quaisquer prá ticas c omuns que possam pre venir possíveis acidente s. ¡At ención! Este símbol o de aviso signific a peligro. E xiste riesg o para su integrida d física. Antes de manipul ar cual quier equipo, c onsiderar l os riesgos que entraña l a corrient e eléctric a y familiarizar se con l os proc edimientos están[...]

T ype C fire ex tinguishers, which use nonc orrosiv e fire re tardants such a s carbon dio xide and Halotr on ™, are most eff ectiv e for suppr essing elec trical fires. T ype C fire exting uishers displa ce o xyg en from the point of c ombustion to elimina te the fire . For extinguishing fir e on or around equipment tha t dra ws air fr om the en[...]

W arnung Gerät nur v on geschul tem, qualifiziert em Per sonal installieren oder ausw echseln la ssen. A vvertenza S olo per sonale addes trat o e qualifica to dev e essere aut orizzat o ad install are o sostituir e questo appar ecchio . Adv arsel Kun k valifisert personell med rik tig opplæring bør monter e eller byt te ut dett e utstyr et. A v[...]

CHAPTER 16 R adia tion and La ser W arnings • La ser and LED Saf ety Guidelines and W arnings f or EX Series S witche s on page 161 • Radia tion from Open P ort Apertures W arning on pag e 163 Laser and LED S af ety Guidelines and W arnings for EX S eries S witches EX Series s witches and the XRE200 Ex ternal R outing Engine are equippe d with [...]

W aarschuwing Kla sse-1 la ser produkt. V aroitus Luokan 1 l asertuot e. At tention Pr oduit la ser de class e I. W arnung Laserproduk t der Kla sse 1. W ARNING: A vvert enza Prodott o la ser di Cla sse 1. Adv arsel Las erprodukt a v kla sse 1. A viso Produt o la ser de classe 1. ¡At ención! Produc to l áser Cla se I. V arning! Laserproduk t av [...]

W ARNING: A dvarsel S tirr eller se ikk e direkt e p strlen me d optiske instrumenter . W ARNING: A viso Não olhe fixament e para o raio , nem olhe para el e direc tamente c om instrumentos óptic os. W ARNING: ¡A tención! No mirar fijament e el haz ni observarl o direc tamente con instrument os ópticos. W ARNING: V arning! Rikta int e blicken [...]

W aarschuwing Aangezien onzichtb are straling v anuit de opening van de poort kan k omen als er geen fiberk abel aangesl oten is, dient bl ootstelling aan straling en he t kijken in open opening en vermeden t e worden. V aroitus K oska portin auk osta v oi emittoitua näkymä tönt ä säteil yä, k un kuitukaapelia ei ol e kytk ettynä, v ältä s[...]

CHAPTER 1 7 Inst all a tion and Maint enanc e Sa f et y Inf orma tion • Install ation Instructions W arning on pag e 165 • Chassis Lifting Guidelines f or EX2200 S witches on pa ge 166 • Ramp W arning on page 167 • Rack-Mounting and C abinet-Mounting W arnings on page 167 • W all-Mounting W arnings f or EX2200 Swit ches on pag e 171 • G[...]

A viso Leia a s instruções de instal ação ant es de ligar o sist ema à sua font e de energia. ¡At ención! V er las instruc ciones de instal ación antes de c onectar el sist ema a la r ed de alimentación. V arning! Läs install ationsan visningarna innan du koppl ar sy stemet till dess strömf örsörjningsenhe t. R elat ed Documenta tion G[...]

• Bef ore lifting or moving the s witch, disc onnect all ex ternal cabl es. R elat ed Documenta tion General Sa f ety Guidelines and W arnings on pag e 155 • • Install ation Instructions W arning on pag e 165 • Mounting an EX2200 S witch on pag e 74 Ramp W arning This t opic applies to har dware de vices in the EX S eries product f amil y ,[...]

Ensure tha t the rack or c abinet in which the devic e is install ed is evenl y and secur ely supported . Unev en mechanical l oading coul d l ead to a ha zardous c ondition. W ARNING: T o prev ent bodily injury when mounting or servicing the de vice in a rack, t ake the f ollo wing precautions t o ensure tha t the sys tem remains stabl e. The f ol[...]

At tention P our éviter t oute bl essure c orporelle pendant l es opér ations de montag e ou de répar ation de c ette unit é en ca sier , il convient de pr endre des préc autions spéciales a fin de maintenir l a stabilit é du syst ème. Le s directiv es ci-dessous sont destinées à a ssurer l a prote ction du personnel: • Le r ack sur l e[...]

Adv arsel Unngå fy siske ska der under montering ell er repara sjonsarbeid på denne enhet en når den befinner seg i et kabinet t. V ær nøye med a t sys temet er stabil t. Følg ende retningslinjer er git t for å verne om sikk erhet en: • Juniper Netw orks swit ch må install eres i et st ativ som er f orankre t til by gningsstruktur en. •[...]

V arning! För att undvika kr oppsskada när du install erar ell er utf ör underhållsarbet e på denna enhet på en ställning må ste du vidt a särskil da för siktighetså tg ärder för a tt f örsäkra dig om a tt sy stemet s tår stadigt. Följande riktlinjer g es för a tt trygg a din säkerhe t: • Juniper Netw orks swit ch måst e insta[...]

R elat ed Documenta tion Mounting an EX2200 S witch on a W all on page 88 • Grounded Equipment W arning This t opic applies to har dware de vices in the EX S eries product f amil y , which includes swit ches and the XRE200 Ext ernal Routing Engine . This t opic also applies t o hardwar e device s in the QFX Serie s. W ARNING: The de vice is int e[...]

Whil e performing the maint enance activitie s for devic es, observ e the foll owing guidelines and warnings: • Jew elry Remo val W arning on page 173 • Lightning Ac tivity W arning on page 174 • Opera ting T empera ture W arning on page 175 • Pr oduct Disposal W arning on page 176 Jew elry Remo val W arning W ARNING: Bef ore working on e q[...]

A viso Antes de tr abalhar em equipamento que est eja ligado a linha s de corr ente, r etire t odas as jóia s que estiv er a usar (incluindo anéis, fios e rel ógios). Os object os metálicos a quecer ão em contac to c om a corrent e e em conta cto c om a ligaçã o à terr a, podendo causar queimadur as gr ave s ou ficarem s oldados aos t ermin[...]

Opera ting T empera ture W arning W ARNING: T o prev ent the device fr om ov erheating, do not oper at e it in an area tha t ex cee ds the maximum rec ommended ambient temper ature of 104° F ( 40° C) for EX6200 swit ches, EX8208 switches, EX8216 s witches, QFX S eries devic es, and XRE200 External R outing Engines and 113° F ( 45° C) for EX2200[...]

¡At ención! P ara impedir que un encamina dor de la serie Juniper Netw orks swit ch se recalient e, no l o haga funcionar en un ár ea en la que se super e la temper atur a ambiente máxima r ecomendada de 40° C. P ar a impedir la restric ción de la entr ada de aire, deje un esp acio mínimo de 15,2 cm alrededor de la s apertura s para v entila[...]

• DC P ower El ectric al Saf ety Guidelines on pa ge 184 • La ser and LED Saf ety Guidelines and W arnings f or EX Series S witche s on page 161 • Install ation Instructions W arning on pag e 165 • Grounded Equipment W arning on pag e 172 • La ser and LED Saf ety Guidelines and W arnings f or the QFX Serie s 177 Copyright © 2011, Juniper[...]

Cop yright © 2011, Juniper Network s, Inc. 178 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 18 P o w er and El ectric al Sa f et y Inf orma tion • General El ectric al Saf ety Guidelines and W arnings on pag e 179 • Pr evention of El ectr ostatic Dis charge D amage on pa ge 180 • A C Po wer El ectrical Sa f ety Guidelines on pag e 182 • A C Po wer Disc onnection W arning on page 183 • DC P ower El ectric al Saf ety Guide[...]

CA UTION: Befor e removing or ins talling components of a de vice, a ttach an ESD str ap to an E SD point and place the other end of the s trap around y our bare wrist. F ailur e to use an ESD str ap coul d resul t in damag e to the swit ch. • Install the devic e in complianc e with the foll owing l ocal, na tional, and interna tional ele ctrical[...]

Devic e components tha t are shipped in antista tic bag s are sensitive t o damag e from sta tic elec tricity . S ome components can be impair ed by v olt ages a s l ow a s 30 V . Y ou can e asil y gener at e potentiall y damaging sta tic vol tag es whenev er you handl e pla stic or foam p acking mat erial or if you mo ve component s across pl asti[...]

R elat ed Documenta tion General Sa f ety Guidelines and W arnings on pag e 155 • • See EX2200 S wit ches Hardwar e Overvie w on page 3 f or the ESD point l oca tion. • See R ear P anel of an EX3200 S witch f or the ESD point l oca tion. • See R ear P anel of an EX3300 S witch f or the ESD point l oca tion. • See R ear P anel of an EX4200[...]

remo ved t o av oid elec tric shock. T o disconnect po wer , unplug all po wer cor ds (one for e ach pow er supply ). Po wer Cabl e W arning (Japanese) W ARNING: The a ttached po wer c able is onl y for this produc t. Do not use the cable f or another product. R elat ed Documenta tion General Sa f ety Guidelines and W arnings on pag e 155 • • G[...]

V aroitus K ytke irti vaiht ovirtal aitteiden virtajoht o, ennen k uin teet mitään asennuspohjall e tai ty öskent ele t virtaläht eiden läheisyy dessä. At tention A vant de tra vaill er sur un châssis ou à pro ximit é d 'une alimentation éle ctrique, débrancher l e cor don d'alimentation des unit és en cour ant alt ernatif . W[...]

• A DC-pow ered de vice is equipped with a DC t erminal block tha t is ra ted f or the pow er requir ements of a maximall y configur ed devic e. NO TE: T o supply sufficient po wer , terminat e the DC input wiring on a facilit y DC sourc e that is capabl e of suppl ying: • Minimum of 7 .5 A at –48 VDC f or EX2200 and EX3300 switche s • Mini[...]

• DC P ower Gr ounding Re quirements and W arning on page 188 • DC P ower W iring Sequenc e W arning on page 189 • DC P ower W iring T erminations W arning on pag e 190 • Connec ting DC Po wer t o an EX2200 Swit ch on pag e 110 • Connec ting DC Po wer t o an EX3200 Swit ch • Connec ting DC Po wer t o an EX4200 S witch • Connec ting DC[...]

sämtlicher Str om abgest ellt ist, ma chen Sie auf der Schal ttaf el den Unterbr echer für die Gleichstr omschaltung ausfindig, s tellen S ie den Unterbr echer auf AUS , und kleben Sie den S chalt ergriff des Unt erbrechers mit Kl ebeband in der AUS-S tell ung fest. A vvertenza P rima di svol ger e una qualsiasi dell e proc edure seg uenti, verif[...]

DC P ow er Grounding R equirements and W arning This t opic applies to har dware de vices in the EX S eries product f amil y , which includes swit ches and the XRE200 Ext ernal Routing Engine . An insula te d grounding conduc tor tha t is identical in size t o the grounded and ungr ounded branch cir cuit suppl y conduct ors but is identifiable b y [...]

DC P ow er Wiring S equence W arning This t opic applies to har dware de vices in the EX S eries product f amil y , which includes swit ches and the XRE200 Ext ernal Routing Engine . W ARNING: Wir e the DC pow er supply using the appr opriat e lugs. W hen connec ting power , the proper wiring sequenc e is ground to gr ound, +R TN to +RTN, then –4[...]

–48 V a –48 V , +RTN a +R TN, entonc es molió para mol er . Observe que el alambr e de tierra se debe c onectar siempre primer o y desconec tar por último . Observe que el al ambre de tierr a se debe conect ar siempre primero y descone ctar por último . ¡At ención! Wir e a fonte de aliment ação de DC Usando os t alões apr opriados na ex[...]

At tention Quand des fils t orsadés sont né cessair es, utiliser des douilles terminal es homol oguées tell es que cell es à circ uit fermé ou du type à pl age ouvert e av ec cosses r ebroussées. C es douilles t erminales doiv ent être de l a taill e qui convient aux fil s et doivent êtr e ref ermées sur la g aine isolant e et sur le c on[...]

TN P ow er W arning This t opic applies to har dware de vices in the EX S eries product f amil y , which includes swit ches and the XRE200 Ext ernal Routing Engine . This t opic also applies t o hardwar e device s in the QFX Serie s. W ARNING: The de vice is designed t o work with a TN po wer sy stem. W aarschuwing Het apparaa t is ontw orpen om te[...]

If an ele ctrical ac cident resul ts in an injury , take the f ollo wing actions in this order: 1. Use caution. Be a war e of potentiall y hazardous c onditions that c ould c ause further injury . 2. Disconne ct pow er from the devic e. 3. If possibl e, send another person t o get medic al aid. Otherwise, a ssess the c ondition of the victim, then [...]

Cop yright © 2011, Juniper Network s, Inc. 194 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

P ART 8 C omplianc e Inf orma tion • Complianc e Informa tion on pag e 197 195 Copyright © 2011, Juniper Netw orks, Inc.[...]

Cop yright © 2011, Juniper Network s, Inc. 196 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

CHAPTER 19 C omplianc e Inf orma tion • Ag ency Approv als f or EX Series S witches on pa ge 197 • Complianc e Sta tement s for EMC R equirements f or EX Series S witches on pag e 198 • Complianc e Sta tement s for A coustic Noise f or EX Series S witche s on page 201 • Decl ara tion of Conformit y for EX2200 S witche s on page 202 Ag ency [...]

• EN 300386 • EN 61000-3-2 P ower Line Harmonic s • EN 61000-3-3 V oltag e Fluc tuations and Flick er • EN 61000-4-2 ESD • EN 61000-4-3 Radia te d Immunity • EN 61000-4-4 EFT • EN 61000-4-5 Sur ge • EN 61000-4-6 L ow Frequenc y Common Immunity • EN 61000-4-11 V oltag e Dips and Sag s R elat ed Documenta tion Complianc e Sta tement[...]

must also be inst alled using an ac cept able method of c onnection. In some c ases, the inside wiring associa te d with a single line individual servic e may be e xtended b y means of a certified c onnect or assembl y . T he customer shoul d be aw are tha t compliance with the abov e conditions ma y not prev ent degrada tion of service in s ome si[...]

This equipment is Indus trial (Cla ss A) el ectr omagnetic w ave suit ability equipment and sell er or user should tak e notice of it, and this e quipment is to be used in the pl aces e xc ept for home United S ta tes The de vice ha s been test ed and f ound to compl y with the limits f or a Cla ss A digital devic e, pursuant t o Part 15 of the F C[...]

• GR-63-CORE: NEBS , Physic al Prot ection • The equipment is suit able f or install ation a s part of the Common Bonding Net work (CBN). • The equipment is suit able f or install ation in l oca tions where the National El ectric al Code (NE C) applies. • The ba tt ery return c onnection is to be tr ea ted a s an Isola ted DC r eturn (DC-I)[...]

Declar a tion of Conf ormity f or EX2200 Swit ches Cop yright © 2011, Juniper Network s, Inc. 202 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]

R elat ed Documenta tion • Ag ency Approv als f or EX Series S witches on pa ge 197 • Complianc e Sta tement s for EMC R equirements f or EX Series S witches on pag e 198 • Complianc e Sta tement s for A coustic Noise f or EX Series S witche s on page 201 203 Copyright © 2011, Juniper Netw orks, Inc. Chapter 19: C ompliance Informa tion[...]

Cop yright © 2011, Juniper Network s, Inc. 204 Compl ete Har dware Guide f or EX2200 Ethernet Swit ches[...]