-
Seite 1
© 2004 VICTOR COMPANY OF JAPAN, LIMITED Colour Television INSTRUCTIONS LCT1589-00 1A-U 0204-MK-CR-JMUK AV-32H77SK AV-28H77SK AV-32H77SK/AV-28H77SK LCT1589-001A-U_Cover.fm Pag e 1 Tuesday, January 6, 2004 3:54 PM[...]
-
Seite 2
2 Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Avoid improper installation and never position the unit where good ventil[...]
-
Seite 3
3 Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved ex[...]
-
Seite 4
4 • Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a malfunction or damage. • Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer’s[...]
-
Seite 5
5 CONTENTS Setting up your TV ............. .............. ........6 Connecting the aerial and video cassette recorder ( VCR) .............. .......... ............. .. 6 Connecting the power cord to the AC outlet... ............[...]
-
Seite 6
6 Setting up your TV Caution • Turn off all the equipment includi ng the TV before connecting anything. Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details[...]
-
Seite 7
Setting up your TV 7 Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Putting the batteries into the remote control Use two AAA/R03 dry cel[...]
-
Seite 8
8 Setting up your TV 2 Press the a button The LANGUAGE menu appears. 3 Press the 6 buttons to choose ENGLISH The on-screen display wi ll then be in English. To receive SKY 1 you need a satellite tuner. You must have the satellite[...]
-
Seite 9
Setting up your TV 9 T-V LINK functions When you have a T-V LINK compatible VCR connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: To use T-V LINK f[...]
-
Seite 10
10 TV buttons and functions Refer to the pages in brackets for details. 1 Remote control sensor 2 Power lamp (7, 10) 3 Main power button (7, 10) 4 Headphone jack (mini jack) (35) 5 P p buttons/ q buttons (11) 6 r (Volume) button [...]
-
Seite 11
11 Remote control buttons and functions 1 Muting button 2 Number butt ons 3 c button 4 HYPER SOUND button 5 Information button 6 TV button 7 5 buttons 8 Standby button 9 Colour buttons 0 a button - 6 buttons = VCR/DVD/Teletext co[...]
-
Seite 12
12 Remote control b uttons and functions Use the PR LIST: 1 Press the h (Information) button to display the PR LIST Pressing the h (information) button changes the display as follows: 2 Press the 5 and 6 buttons to choose a p[...]
-
Seite 13
Remote control buttons and functions 13 To return to a TV channel: Press the b button, the 6 buttons or the number buttons. To use the program me number PR 0 (AV): When the TV and VCR are connected only by the aerial cable, choos[...]
-
Seite 14
14 Remote control b uttons and functions FULL: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. • For 16:9 aspect ratio pictures that have been squeezed into a[...]
-
Seite 15
Remote control buttons and functions 15 Displaying the current time You can display the current time on the screen. Press the h (Information) button to display th e current tim e Pressing the h (Information) button changes the di[...]
-
Seite 16
16 Teletext function Basic operation You can view two types of teletext broadcasts on the TV: FLOF (Fastext) and WST. 1 Choose a TV chan nel with a teletext broadcast 2 Set the VCR P DVD switch to the P P P P (Text) position 3 Pr[...]
-
Seite 17
Teletext function 17 Hold You can hold a teletext page on the scr een for as long as you want, even while several other teletext pages are being rece ived. Press the C C C C (Hold) button To cancel the Hold function: Press the C [...]
-
Seite 18
18 Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’ s functions, you need to understan d the basic menu operating techniques fully. Basic operation 1 Press the a button to[...]
-
Seite 19
19 PICTURE SETTING See “Using th e TV’s menu” (page 18) for details of displaying the menu. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and[...]
-
Seite 20
20 PICTURE FEATURES See “Using th e TV’s menu” (page 18) for details of displaying the menu. DIGITAL VNR The DIGITAL VNR function cuts down the amount of ‘noise’ (‘snow’ or interference) in the original pict ure. Yo[...]
-
Seite 21
PICTURE FEATURES 21 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a button 2 Press the[...]
-
Seite 22
22 SOUND SETTING See “Using th e TV’s menu” (page 18) for details of displaying the menu. STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingua[...]
-
Seite 23
23 EXT SETTING See “Using th e TV’s menu” (page 18) for details of displaying the menu. S-IN (S-VIDEO input) You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO sig nal (Y/C sign[...]
-
Seite 24
24 EXT SETTING To erase a name assigne d to the EXT terminal: Choose a blank space. 4 Press the a button to complete the setting DUBBING You can choose a signal source to be output from the EXT-2 terminal. You can do this with th[...]
-
Seite 25
25 FEATURES See “Using th e TV’s menu” (page 18) for details of displaying the menu. SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER, then press the a button A[...]
-
Seite 26
26 FEATURES 3 Press the a button The Sub-menu of CHILD LOCK appears. 4 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered[...]
-
Seite 27
27 INSTALL See “Using th e TV’s menu” (page 18) for details of displaying the menu. LANGUAGE You can choose the language you want to use for the on-screen display from the language list in a menu. 1 Choose LANGUAGE, th en p[...]
-
Seite 28
28 INSTALL 3 Press the a button to display the T-V LINK menu 4 If you do no t have a T-V L INK compatible VCR connected: Press the b button to le ave the T-V LINK menu. The T-V LINK menu disappears and all the settings are com pl[...]
-
Seite 29
INSTALL 29 2 Follow the descriptio n for a function you want to use MOVE: This function changes a programme number (PR) of a TV channel. ID: This function registers a channel name (ID) to a TV channel. INSERT: This function adds [...]
-
Seite 30
30 INSTALL 3 Press the 6 buttons to choose the first character of a channel name (ID) you want to give the TV channel 4 Press the blue button to display the ID LIST (channel name list) 5 Press the 6 buttons to choose the channel [...]
-
Seite 31
INSTALL 31 DELETE 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen.[...]
-
Seite 32
32 Additional menu operations Using the ACI function This TV has an ACI function which decodes the ACI (Automatic Channel Installation) data. Using the ACI function allows all TV channels transmitt ed from the cable TV station to[...]
-
Seite 33
Additional menu operations 33 Downloading data to a VCR You can send the latest programme numbers (PR) data to a VCR with the T-V LINK function. • You can only do this when a T-V LINK compatible VCR is connected to the EXT- 2 t[...]
-
Seite 34
34 Additional menu operations 7 Follow “Downloa ding data to a VCR” on page 33 to transmit the programme number (PR) data to the VCR 8 If you have another TV channel yo u want to unscramble using a decoder, repe at steps 2 to[...]
-
Seite 35
35 Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connectin g anything: • Read the manuals that came with the equipment. D[...]
-
Seite 36
36 Additional preparation Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-V HS VCR Connect the equipment to an EXT terminal (but not the EXT-1 terminal). You can choose between an S-VIDEO signal (Y/C s[...]
-
Seite 37
37 Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains p[...]
-
Seite 38
38 Troubleshooti ng Poor sound • Have you adjusted BASS or TREBLE properly? If not, follow the description “Sound adjustment” on page 22. • When TV channel reception is poor, it can be hard to hear stereo or bilingual[...]
-
Seite 39
39 Specifications We may change the design and specific ations without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown fo r any commercial or demonstration purpose in public places (c[...]