JVC DT-V1900CG Bedienungsanleitung

INSTR UCTIONS DT -V1900CG MUL TI-FORMA T MONIT OR BEDIENUNGSANLEITUNG : MUL TI-SYSTEM-MONIT OR MANUEL D’INSTR UCTIONS : MONITEUR MUL TI-FORMA T MANU ALE DI ISTR UZIONI : MONIT OR MUL TI-FORMA TI INSTR UCCIONES : MONIT OR MUL TIFORMA T O  !" :  !"#$ VOLUME SLOT 1 A B DEGAUSS MENU MUTING SCREENS CHECK ASPECT AREA MARKER UNDER [...]

ENGLISH INSTRUCTIONS MUL TI-FORMA T MONIT OR DT -V1900CG Thank you for purchasing this JVC Multi-Format Monitor . Before using it, read and follow all instructions carefully to take full advantage of the monitor ’ s capabilities. For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for [...]

SCREEN BURN ● It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does not occur as far as displaying normal video playback motion images. 䡵 PRECAUTIONS ● U[...]

ENGLISH 3 Fuse POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countr[...]

CONTROLS AND FEA TURES FRONT VIEW <Front Panel> T ally lamp Lights when the tally control signal is ON. Set the MAKE/ TRIGGER terminal’s tally control in the REMOTE (external control) terminal setup menu. For details, refer to Page 20. The lamp color can be set to red or green. T o set the color , use T ALL Y SELECT in the "FUNCTION SE[...]

ENGLISH REAR/SIDE VIEW <Rear Panel> COLOR OFF button/lamp Press the COLOR OFF button. The button lights and the screen becomes monochrome. When the COLOR OFF button is pressed while lit, the light goes off and the normal screen is restored. Use this function to confirm the noise in the brightness signal or to confirm the white balance. NOTE: [...]

Video input/output terminals Input (IN) and output (OUT) terminals for component (colour difference) or RGB signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Select component signal : press INPUT SELECT A/C/E button Select RGB signal : press INPUT [...]

ENGLISH 䡵 SDI INPUT CARD (OPTIONAL: IF-C01SDG) AUDIO 2 AUDIO 1 OUT IN SWITCHED OUT SDI 1 SDI 2 IN IN 1 2 3 4 Output terminal for a selected component serial digital signal Output terminal for a selected digital signal (the input displayed on the screen). The output signal is cable- compensated. NOTE: When the monitor ’s power is OFF , no digita[...]

8 CONTROLS AND FEA TURES (INPUT CARD: OPTIONAL) (cont'd) 䡵 HD SDI INPUT CARD (OPTIONAL: IF-C12HSDG) 䡵 Compatible signal formats: 720/60p, 1080/50i, 1080/60i, 1035/60i, 1080/24psF , EMBEDDED AUDIO Input and output terminals for HD SDI 1 component serial digital signals Input (IN) and output (OUT) terminals for HD serial digital signals. Sel[...]

ENGLISH PREP ARA TION 1. Turn of f the Multi-Format Monitor ’ s main power and unplug the power cable from the AC outlet. 2. Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card. 3. Insert the Input Card ’ s board (green- coloured) into the slot, fitting the boar[...]

10 1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws (provided). 2 Attach the Power Cord Holder cover to the AC power cord. 3. Connect the AC power cord to the AC inlet, and join the Power Cord Holder cover with the case. 䡵 A TT ACHING THE POWER CORD HOLDER The provided Power Cord Holder prevents accide[...]

ENGLISH BASIC MENU OPERA TIONS (MAIN MENU, SETUP MENU) 䡵 ABOUT MENU SCREENS This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen). The MAIN MENU contains the functions normally used, and the SETUP MENU contains the settings required for initial setup. <SETUP MENU> FUNCTION SETTING PICTURE SUB ADJ. COLOR T[...]

12 HOW TO USE “MAIN MENU” 䡵 “ MAIN MENU ” ITEMS The following items appear in MAIN MENU. Items Functions Displays 1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. * 1 2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. 3 sub menu POSITION Selects the dis[...]

ENGLISH 1. APERTURE CONTROL Compensates the frequency characteristics of the input video signal. Press the button to display the setting menu illustrated on the right. NOTE : APERTURE CONTROL is not displayed when the RGB signal is input. ● INPUT A/B corresponds to SLOT 1, INPUT C/D to SLOT 2, and INPUT E/F to SLOT 3. ● VIDEO-1 or VIDEO-2 shows[...]

14 Input Signal Format Standard Manual setting setting (MANUAL) NTSC, P AL, 480/60i, ITU601 480/60p, 576/50i, 575/50p ITU709 720/60p, 1080/50i, 1080/60i, ITU709 1035/60i, 1080/24psF <COLOR MATRIX> SELECT :MANUAL R-Y PHASE : 90 R/B GAIN :0.86 G-Y PHASE : 244 G/B GAIN :0.36 sub menu reset EXIT: MENU ADJUST:- + SELECT: 5. AREA MARKER-R Items : S[...]

ENGLISH HOW TO USE “SETUP MENU” 䡵 “ SETUP MENU ” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor ’s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel. 3 COLOR TEMP ./BAL. Sets or adjusts the colour temperature or white balance. 4 SIZE/POSI.[...]

16 HOW TO USE “SETUP MENU” (cont'd) <FUNCTION SETTING> COLOR SYSTEM :AUTO SYNC SELECT :AUTO RUSH DELAY TIME :STD. TALLY SELECT :GREEN REMOTE SYSTEM :MAKE EMBEDDED :1G HOUR METER X100h :000 EXIT: MENU ADJUST:- + SELECT: 䡵 ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. FUNCTION SETTING Selects the colour system and displays the monit[...]

ENGLISH Item : CONTRAST Adjustment range : –20 ~ 00 ~ +20 Function : For approximate adjustment of the picture contrast. Before adjustment, set the CON- TRAST knob on the front panel to 0. Item : BRIGHT Adjustment range : –20 ~ 00 ~ +20 Function : For approximate adjustment of the picture brightness. Before adjustment, set the BRIGHT knob on th[...]

18 HOW TO USE “SETUP MENU” (cont'd) <DISTORTION ADJ.> PINCUSHION : 00 PIN.BALANCE : 00 PARALLELOGRAM : 00 TRAPEZOID : 00 ROTATION : 00 sub menu reset EXIT: MENU ADJUST:- + SELECT: 5. DISTORTION ADJ. Compensates the picture distortion. Press the button to display the setting menu illustrated on the right. Item : PINCUSHION Adjustment [...]

ENGLISH <STATUS DISPLAY> STATUS DISPLAY :ON 1080/1035 :1080 EXIT: MENU ADJUST:- + SELECT: Item : ST A TUS DISPLA Y Settings : ON/OFF Function : Makes the format name appear or disappear when signals are input and the signal status appear or disappear when the input signal is changed. ON : The information is displayed. OFF : The information is[...]

20 HOW TO USE EXTERNAL CONTROL 䡵 ABOUT EXTERNAL CONTROL The Multi-Format Monitor has two external control terminals. One is the MAKE/TRIGGER terminal, which allows the monitor to be controlled by the MAKE(make contact) or TRG. (trigger contact) method selected in the function setting. MAKE (make contact system) : Controls the function by stable d[...]

ENGLISH 䡵 HOW T O USE THE RS-232C TERMINAL Y ou can control the monitor from your PC via the RS-232C terminal. For details on operating the monitor from the PC, consult your dealer or service centre for details. 1. Cable Prepare a straight cable with a D-sub connector (9-pin, female) and a D-sub connector (9-pin, male) 2. Communications Specifica[...]

22 TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorised dealer or service centre for assistance. Problems No power supply No picture with the power on No sound Wrong colour Unnatural picture Shaking picture [...]

ENGLISH Problems Irregular colour Wrong picture position, wrong picture size Front panel buttons and knobs do not function Points to be checked Is the monitor placed or moved close to a speaker or any other device incorporating a magnet? Has the position of the monitor been changed with the power on? Has the picture position, size or distortion bee[...]

24 䡵 SELF-CHECK INDICA TIONS When the screen goes blank, and one or more of the INPUT SELECT A through F buttons on the front control panel start blinking... This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes trouble-shooting easie r. Whenever a problem occurs, a combination of “self-check i[...]

ENGLISH 440 377 285 375 380.4 372 206 336 95.7 496 VOLUME SLOT 1 A B DEGAUSS MENU MUTING SCREENS CHECK ASPECT AREA MARKER UNDER SCAN PULSE CROSS COLOR OFF SLOT 2 C D SLOT 3 POWER E F INPUT SELECT VOLUME SLOT 1 A B DEGAUSS MENU MUTING SCREENS CHECK ASPECT AREA MARKER UNDER SCAN PULSE CROSS COLOR OFF SLOT 2 C D SLOT 3 POWER E F INPUT SELECT SPECIFICA[...]

26 Usage Precautions ● The selected signal is output from the SWITCHED OUT terminal only when the monitor ’s power is turned on. ● The output signal from the SWITCHED OUT terminal is the one that is selected from the signals input to SDI 1 / HD SDI 1 or SDI 2 / HD SDI 2. The table below shows the connection between the INPUT SELECT buttons (i[...]

ENGLISH SPECIFICA TIONS (INPUT CARD: OPTIONAL) 䡵 IF-C01COMG: COMPONENT/RGB INPUT CARD T ype : Component/RGB input card for Multi-Format Monitor Inputs/Outputs : Component (Y , P B /B-Y , P R /R-Y) or RGB: 1 line, BNC connector x 6 (Y : 1 V (p-p), 75 Ω /P B , B-Y , P R , R-Y , R, G, B: 0.7 V (p-p), 75 Ω ) Synchronised signal (HD/C S , VD) : 1 [...]

䡵 IF-C01HSDG: HD SDI INPUT CARD T ype : HD SDI input card for Multi-Format Monitor Inputs/Outputs : Digital input (HD SDI 1/HD SDI 2): 2 lines, BNC connector x 2 (0.8 V (p-p), 75 Ω ) Digital output (SWITCHED OUT): 1 line, BNC connector x 1 (0.8 V (p-p), 75 Ω ) Audio signal: 1 line (monaural), RCA pin x 2 (0.5 V (rms), high impedance) * The in[...]

LCT1002-001B(EN) 02.1.29, 6:24 PM 27[...]

© 2002 VICTOR COMP ANY OF JAP AN, LIMITED Printed in Japan 0202-Y-U-VP VICTOR COMPANY OF JAPAN, LIMITED DT -V1900CG MUL TI-FORMA T MONIT OR LCT1116-001A(EN) 02.2.12, 1:36 PM 32[...]