JVC G1000 Bedienungsanleitung

1 ENGLISH DIGIT AL GRAPHICS PROJECT OR G1000 INSTRUCTIONS G1000 [D] SubcoverEN 99.2.24, 5:49 PM 1[...]

2 Thank you for purchasing this projector . Before using it, read and follow all instructions carefully to take full advantage of the projector's capabilities. SAFETY PRECAUTIONS W ARNING : TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION : To reduce the risk of electric shock, do not remove cover . R[...]

3 ENGLISH – This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company . – This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to in[...]

4 Contents SAFETY PRECAUTIONS ........................... 2 Accessories ............................................... 5 Controls and Features .............................. 6 Front Side / T op Surface / Right Side .................... 6 Left-hand side ....................................................... 7 Bottom Surface .......................[...]

5 ENGLISH Remote control unit (RM-M100U) AAA/R03-size dry cell battery ( × 2) (for checking operation) Power code [approx. 2.5 m (8.2 ft)] Personal computer connection cable [approx. 2 m (6.56 ft)] (D-sub, 3-row 15 pin) Conversion adapter for Mac (for Macintosh) Audio cable [approx. 3 m (9.84 ft)] (3.5 mm dia. stereo mini plug) A V connection cabl[...]

6 Controls and Features Front Side / T op Surface / Right Side STAND BY OPERATE LAM P TEMP EM ERGENCY VIDEO COMPUTER SETTING QUICK ALIG N - 2 + 3 1 Control panel For details, refer to “Control Panel” (page 9). 2 Exhaust vents V ents for cooling fans through which warm air comes out. CAUTION • Do not block the exhaust vents, or heat builds up [...]

7 ENGLISH Controls and Features (cont.) Left-hand side p AC IN (power input) terminal This is the power input terminal where the supplied power cord is connected. For details, refer to page 24. q MAIN POWER switch This is the main power switch. When it is turned on, the projector goes into stand-by state, and the ST AND BY indicator on the control [...]

8 Controls and Features (cont.) Bottom Surface r Air intake area (filter) Air is taken in through this area to cool the light-source lamp. If this area is blocked or if something that obstructs taking in or exhausting air is placed around the projector , heat may build up inside and could cause a fire. For details, refer to “Precautions for Insta[...]

9 ENGLISH Controls and Features (cont.) Control Panel ST AND BY LAMP TEMP EMERGENCY VIDEO COMPUTER SETTING QUICK ALIGN. - 2 + 3 1 ST AND BY Indicator ON : When in stand-by mode. Blinking : When in cool-down mode. Memo About the cool-down mode: This projector has a function to cool down the heated lamp for a fixed period of time after projection is [...]

10 ST AND BY LAMP TEMP EMERGENCY VIDEO COMPUTER SETTING QUICK ALIGN. - 2 + 3 Controls and Features (cont.) Control Panel (Cont.) 7 VIDEO button Use this button to select a device such as a video deck connected to the A V IN terminal of the projector . Each time you press the button, the device selected changes as follows: Y/C VIDEO Y, P B /B-Y ,P R[...]

11 ENGLISH 1 Y/C (S video) input terminal (Mini DIN 4 pin) Connect this terminal to the S video output terminal of a video deck, etc. 2 VIDEO (composite video) input terminal (BNC) Connect this terminal to the composite video output terminal of a video deck, etc. 3 Y, P B /B-Y , P R /R-Y input terminals (BNC) These are input terminals for component[...]

12 Controls and Features (cont.) Connector Panel (Cont.) 9 COMPUTER IN (computer input) -2 terminal (BNC) These are input terminals for analog RGB signals, vertical sync (V) signals, and horizontal sync (H) signals / composite signals(Cs). Devices which have analog RGB signal output terminals can be connected. * Input of external sync signals is au[...]

13 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER Controls and Features (Cont.) Remote Control Unit 1 Remote control’ s signal transmitter 2 COMPUTER button Use this button to select the devices connected to the projector ’s COMPUTER IN (computer input) -1 and -2 input terminals. Each time [...]

14 Controls and Features (cont.) Installing Batteries Install batteries in the remote control. If the remote control has started to work erratically , replace the batteries. 1 Open the back cover . While pushing on the back cover , slide it in the direction of the arrow . 2 Install the batteries. Place the two batteries (AAA/R03-size) supplied in t[...]

15 ENGLISH Installing the Projector Precautions for Installation ■ When installing the projector , observe the followings: • Do not use the projector placed on its side. Avoid using the projector placed on its side. This could cause a malfunction. • Use the projector within the installed angle. Avoid using the projector inclined ±30° or mor[...]

16 Installing the Projector (Cont.) Projection Distance and Screen Size ■ The projector ’s projection lens is a zoom lens of about 1.5 x. The screen size at the maximum enlargement is 1.5 times that of the minimum size. ■ The projection distance that can be focused is 2.5 to 20 m. Install the projector within this range. Screen Install the pr[...]

17 ENGLISH Installing the Projector (Cont.) Relationship between Projection Distances and Projection Screen Sizes ■ For 4 : 3 aspect ratio screens 8.2 ft (2.5 m) 42” (approx. 107 cm) 63” (approx. 160 cm) 9.84 ft (3.0 m) 51” (approx. 130 cm) 76” (approx. 193 cm) 13.12 ft (4.0 m) 68” (approx. 173 cm) 102” (approx. 259 cm) 16.4 ft (5.0 m[...]

18 Installing the Projector (Cont.) Effective Range and Distance of the Remote Control Unit The operable distance of the remote control unit is about 10 m (32.8 ft) for direct reception. The remote control can be used by having it reflected on the screen, etc. When you use the remote control by reflecting it at the screen, the total distance of A +[...]

19 ENGLISH Connecting to V arious Devices The following signals can be input to the projector: ■ Video signals (1) Response to color systems * 1 : Responds if Y/C output is available. * 2 : Signifies that component signals (“Y , P B , P R ” / “ Y , B-Y , R-Y” / “G, B, R, H/C S , V”) conform to the signal timing (synchroniza- tion and [...]

20 Connecting to V arious Devices (Cont.) Connecting to V ideo Devices Before connection, be sure to turn off both the projector and video device. • Read the manual which comes with each video device thoroughly . • Use the supplied A V connection cable. An A V connection cable with an S video terminal is not supplied. S video cable (separately [...]

21 ENGLISH Before connection, be sure to turn off both the projector and other devices to be connected. • Read the manual thoroughly which comes with the device to be connected. • Speakers with a built-in amplifier and game devices can be connected. Use the A V connection cable and audio cable supplied, or the cable supplied with a game device.[...]

22 Connecting to V arious Devices (Cont.) Connecting to Computer Devices Before connection, be sure to turn off both the projector and computer devices. • Read the manual which comes with each device thoroughly . ■ Connection to an IBM PC or IBM-compatible computer • Use the supplied computer connection cable. Also, prepare cables required fo[...]

23 ENGLISH Before connection, be sure to turn off both the projector and computer devices. • Read the manual which comes with each device thoroughly . ■ Connection to Macintosh • Use the supplied Personal computer connection cable and the supplied conversion adapter for Mac. Connecting to Computer Devices (Cont.) • Desktop type Connecting t[...]

24 Connecting to V arious Devices (Cont.) After all devices have finished being connected, connect the projector ’s power cord. At this time, do not turn on the MAIN POWER switch yet. Power cord (supplied) Lens cap CAUTION T o prevent fire and electric shock, observe the following: • When you do not use devices, pull out their power cords from [...]

25 ENGLISH When T urning On the Devices Connected to the Projector T urn on the switches of the projector and the devices connected in the following order . Skip over unconnected devices if there is any . Power switch of the monitor of the computer which provides input to the projector Peripheral devices of the computer which provides input to the [...]

26 Basic Operations ■ Projector ’ s buttons ■ Remote control unit OPERA TE button MAIN POWER switch ST AND BY LAMP TEMP EMERGENCY VIDEO COMPUTER SETTING QUICK ALIGN. - 2 + 3 The following describes the basic procedure for normal use of the projector . 1 T urn on the MAIN POWER switch. ON [ ❙ ]: The main power turns on and the ST AND BY indi[...]

27 ENGLISH ■ Remote control unit VIDEO button COMPUTER button ST AND BY LAMP TEMP EMERGENCY VIDEO COMPUTER SETTING QUICK ALIGN. - 2 + 3 COMPUTER button Basic Operations (Cont.) ■ Projector ’ s buttons VIDEO button ZOOM (T/W) buttons 2. Select the video input to be projected Remote control unit Projector Screen display * When the input is swit[...]

28 Basic Operations (Cont.) 4. Adjust focus ■ Adjust focus with the remote control’ s FOCUS (+/–) buttons. ■ T o focus on farther points: Press the FOCUS (+) button. ■ T o focus on nearer points: Press the FOCUS (–) button. Remote control unit Note • Focus adjustment can also be made on the setting menu. For operating the setting menu[...]

29 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER Basic Operations (Cont.) ¶ For Operating Other Functions ■ T o turn off video image and audio sound temporarily Press the A V MUTING button. ■ Press once: Video image and audio sound turn of f (do not come out). ■ Press again: Video image[...]

30 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER Basic Operations (Cont.) ■ T o display the MAIN menu The main menu is used to adjust or set the projected video picture and the projector ’s condition, etc. (PIXEL CLOCK, POSITION, PICTURE, SOUND, OPTIONS, SOURCE DECODER and LANGUAGE). For operating[...]

31 ENGLISH Operating the Setting Menu Making Basic Settings ■ Projector ’ s buttons SETTING button QUICK ALIGN. buttons ■ Setting menu Description of adjustment and setting items TRACKING : If wide vertical stripes appear on the screen, adjust the lateral video size and display area so that they disappear . (–255 ↔ 0 ↔ +255) PHASE : If [...]

32 Operating the Main Menu Configuration the Main Menu (A V Input) For computer inputs, see the following page. Y ou can adjust video quality (PICTURE), audio quality (SOUND), etc. using the menus. The menus are configured as follows: Main menu (A V inputs : During A V IN input signal) PIXEL CLOCK TRACKING : Normally , no adjustment is required. Th[...]

33 ENGLISH Operating the Main Menu (Cont.) Configuration of the Main Menu (Computer-related input) Main menu (Computer-related inputs : During COMPUTER IN-1 or -2 input signal) PIXEL CLOCK TRACKING : The lateral size and display area of video image are adjusted. PHASE : Flickering or dim video image is adjusted. POSITION V . POS. : The vertical pos[...]

34 VIDEO AUTO(NTSC(480i)) PIXEL CLOCK POSITION PICTURE SOUND OPTIONS SOURCE DECODER LANGUAGE AUTO(NTSC(480i)) ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Operating the Main Menu (Basic Operation of the Main Men[...]

35 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Changing the Color System Color system (DECODER) display AUTO is set for the color system when the projector is shipped from the factory . Normally , use it in AUT[...]

36 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Changing the Language Display Language display The language in the menu display is set to English when shipped from the factory . When you want to change to another langua[...]

37 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Adjusting the Pixel Clock Submenu item (PIXEL CLOCK) The pixel clock should be adjusted mainly for computer-related inputs. (Normally , it does not need to be adju[...]

38 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Adjusting the Screen Position Submenu item (POSITION) Adjust the position of the screen if it is displaced. 1 Press the MENU/ENTER button. • The main menu appears on the screen. 2 Select “POSITION”[...]

39 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Adjusting Picture Quality Submenu item (PICTURE) Adjust brightness, contrast, etc. so you have the desired screen. Adjustment items (on the PICTURE menu) are diffe[...]

40 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Adjusting Picture Quality (Cont.) Operating the Main Menu (Cont.) 5 Make adjustment with the cursor button 2 or 3 . ■ For video system input • T o adjust multiple items, repeat steps 4 and 5. • T o[...]

41 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Adjusting Picture Quality (Cont.) Gets darker . (–30 ← 0 ← +30) Gets brighter . (–30 → 0 → +30) Gets lower . (–30 ← 0 ← +30) Gets higher . (–30[...]

42 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Adjusting Sound Quality Submenu item (SOUND) Adjust the quality (treble/bass) of sound. 1 Press the MENU/ENTER button. • The main menu appears on the screen. 2 Select th[...]

43 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Submenu item (OPTIONS) Setting and Adjusting Other Functions (OPTIONS) The following optional functions can be set (adjusted). • MENU AUTO OFF • LINE DISPLA Y [...]

44 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) (Cont.) Notes • The selected item is shown in magenta color . Items shown in gray color cannot be operated or set in the [...]

45 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Notes • The selected item is shown in magenta color . Items shown in gray color cannot be operated or set in the current mode. • Items to be set (adjusted) are[...]

46 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Changing (Setting) the Source Submenu item [SOURCE] Normally , use the source setting in AUT O. If use in AUT O is unstable such as color not appearing, the screen being disturbed or the screen being int[...]

47 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Changing (Setting) the Source (Cont.) 5 Press the MENU/ENTER button to set (fix) it. ■ When AUTO is selected: The main menu is automatically cleared, completing [...]

48 Replacing the Light-Source Lamp The light-source lamp has its service life. It is approximately 1000 hours. When the light-source lamp approaches the end of its service life, its degradation progresses rapidly . When the lamp’s used hours exceed 900 hours, the projector ’s LAMP indicator comes on. Also, at the start of projection (lamp energ[...]

49 ENGLISH 2 Loosen the lamp-unit screws, raise the handle, and pull out the lamp unit. Loosen the two screws with a flat-end screwdriver . Screw Lamp unit Handle Lamp unit Handle Screw Lamp-replacement opening cover Be careful not to damage the claw . 3 Insert the new lamp unit fully inside and fasten the screws. Fasten the two screws with a flat-[...]

50 Replacing the Light-source Lamp (Cont.) Resetting the Lamp Use T ime After replacing with a new light-source lamp, reset the counter inside the projector . This works to reset the life calculation of the light-source lamp, allowing the used time of the new light-source lamp to be accumulated. 1 T urn on the MAIN POWER switch to go into stand-by [...]

51 ENGLISH Cleaning and Replacing the Filter Clean the filter periodically . If the filter is heavily stained and does not get clean, or if it is damaged, replace the filter with a new filter (part No.: LC30208). Otherwise, dirt may get inside and appear on the screen, possibly preventing you from enjoying the video image fully . If dirt gets insid[...]

52 T roubleshooting Solutions to common problems related to your projector are described here. If none of the solutions presented here solves the problem, unplug the projector and consult a authorized dealer or service center . Symptom Probable cause Corrective action Page Power is not supplied. Light is not emitted, or light level is low . With po[...]

53 ENGLISH * This projector is equipped with a microcomputer that may operate abnormally due to interference from external components. If this happens, turn off the main power and disconnect the power cord from the wall AC outlet. Then reconnect the power cord to AC outlet and turn on the main power again. (For the turning on and off the power , se[...]

54 Specifications Optical mechanism system • Projection method 3D-ILA device, 1 lens, 3 primary color optical shutter method • D-ILA device 0.9" measured diagonally (1365 × 1024 pixels) × 3 (T otal number of pixels : 4,193,280) • Projecting lens Electric-driven zoom of 1.5 × • Screen size 42" to 300" [recommended] to 521&q[...]

55 ENGLISH Horizontal sync/composite sync signal (H/Cs) H : 1 to 5Vp-p, high impedance (positive/negative polarity) Cs : 1 to 5Vp-p, high impedance (positive/negative polarity) V ertical sync signal (V) V : 1 to 5Vp-p, high impedance (positive/negative polarity) * Some connected devices may not correspond to composite sync (Cs) or G on sync signal.[...]

56 Specifications (Cont.) Outside dimensions ■ To p ■ Front ■ Side STAND BY LAMP TEMP EMERGENCY VIDEO COMPUTER SETTING QUICK ALIGN - 2 + 3 16- 3 / 4 (425)* 1 5- 1 / 4 (133)* 1 ( φ 104) 13- 3 / 8 (339) 14- 7 / 8 (375) 8- 1 / 8 (205)* 1 6- 5 / 8 (168) 16- 3 / 4 (425)* 1 14- 1 / 4 (361) 14- 7 / 8 (375) 9- 1 / 8 (231) 2- 1 / 4 (55.5) 7- 3 / 8 (1[...]

57 ENGLISH ■ RS-232C terminal ■ COMPUTER IN-1 (PC) / COMPUTER OUT T erminal Pin number Signal name 1 N/C 2R D 3T D 4 N/C 5 GND Pin number Signal name 6 N/C 7 N/C 8 N/C 9 N/C Pin number Signal name 1 Red 2 Green 3 Blue 4 N/C 5 N/C 6 GND (Red) 7 GND (Green) 8 GND (Blue) Pin number Signal name 9 N/C 10 GND (SYNC) 1 1 GND 12 N/C 13 H.SYNC 14 V .SYN[...]

58 G1000[D] p.46-59 99.2.24, 5:52 PM 58[...]

59 ENGLISH G1000[D] p.46-59 99.2.24, 5:52 PM 59[...]