JVC HM-DH5U Bedienungsanleitung

HM-DH5U i.LINK AUDIO MONITOR REC SPEED REC PA USE D–VHS DOLBY–D CH STOP D–THEATER D–VHS HDMI TIMER EJECT POWER PCM DTS REW PLAY FF HDMI F – 1 VIDEO ( MONO ) L–AUDIO–R S–VIDEO ––––– MENU ––––– K MTP NTSC For Customer Use: Model No . Serial No. D-VHS DIGIT AL RECORDER INSTRUCTIONS LPT0943-001A Enter below the Model[...]

Masterpage:Left-FullCol 2 EN Filename [HM-DH5U_Eng.fm] Dear Customer, Thank you for purchasing the JVC D- VHS video cassette recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS When the equipment is installed in a cabinet or a shelf, make sure that it[...]

Masterpage:Right-FullCol EN 3 Filename [HM-DH5U_Eng.fm] IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in po tential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguard[...]

Masterpage:Left-FullCol 4 EN Filename [HM-DH5U_Eng.fm] USE 1. Accessories To avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket, or table. I t may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended b[...]

Masterpage:Right-FullCol EN 5 Filename [HM-DH5U_Eng.fm] Failure to heed the following pr ecautions may result in damage to the VCR, Remote or video cassette. 1. DO NOT place the VCR… … in an environment prone to ext reme temperatures or humidit y. … in direct sunl ight. … in a dusty environment. … in an environment where strong magnetic f[...]

Masterpage:Left-FullCol 6 EN Filename [HM-DH5U_TOC.fm] CONTENTS INDEX 7 Front panel.................................................... 7 Rear panel .................................................... 8 Front display panel ....................................... 9 On-screen display ....................................... 10 Remote.................[...]

Masterpage:Right-FullCol EN 7 Filename [HM-DH5U_Eng.fm] INDEX Front panel A [POWER] button : A page 28, 36 B [TIMER j ] button : A page 41, 45, 46 C [D-VHS] LED : A page 35, 36 D [HDMI] LED : A page 12 E [D-THEATER] LED : A page 52 F Cassette loading slot G [STOP ( L )] button : A p age 28, 36 H [CHANNEL +] and [–] buttons : A page 30, 35, 36 I [[...]

Masterpage:Left-FullCol 8 EN Filename [HM-DH5U_Eng.fm] INDEX (cont.) Rear panel A AC power cord : A page 13 B Cooling fan • This prevents the temperatur e from rising inside the VCR. Do not remove it. • Install the VCR so as not to block the area around the cooling fan. • The cooling fan may be activated even if the unit is turned off in t he[...]

Masterpage:Right-FullCol EN 9 Filename [HM-DH5U_Eng.fm] Front display panel A Progressive mode indicat or : A page 14, 65 B Timer mode indicator : A page 41, 45 C Satellite Auto Reco rding indicator : A page 47 D Channel/auxiliary input ([ L1],[L2],[F1],[I-1] etc.) Clock time Time counter : A page 29 Remaining time Recording mode indicator : A page[...]

Masterpage:Left-FullCol 10 EN Filename [HM-DH5U_Eng.fm] INDEX (cont.) On-screen display A Cassette indication B Cassette type indication : A page 35 C Index no. indication : A page 31 D VCR operation mode indication E Audio monitor indications : A page 30 F Clock time Time counter* Tape remaining time (Whe n “REMAIN” appears)** * To reset the t[...]

Masterpage:Right-FullCol EN 11 Filename [HM-DH5U_Eng.fm] Remote A [VCR/TV/CABLE/DBS] select or : A page 76 - 78 B [A/B/C/D] button : A page 78 C [OK] button D [PROGRAM] button : A page 40, 44 E [STOP +/–] buttons : A page 41, 44 F [START +/–] button s : A page 41, 44 G Number keys : A page 36, 76 Character input buttons : A page 58 H [WEEKLY] b[...]

Masterpage:Left-FullCol 12 EN Filename [HM-DH5U_Eng.fm] INSTALLING YOUR NEW VCR Connections NOTES: • HDMI will be automatically activated (HDM I-ON) when a HDMI connectio n has been made. To de-activate (HDMI-OFF), press [HDMI] on the front panel and the [HDMI] LED will turn off. During HDMI-ON ([HDMI] LED on), the image format output to the TV c[...]

Masterpage:Right-FullCol EN 13 Filename [HM-DH5U_Eng.fm] Basic Connection A Check contents Make sure the package contains all of the accessories listed in ‘SPECIFICATIONS’ ( A page 89). B Situate VCR Place the VCR on a stable, horizontal surface. C Connect VCR to TV The following connections are required. A Disconnect the TV an tenna from the T[...]

Masterpage:Left-FullCol 14 EN Filename [HM-DH5U_Eng.fm] INSTALLING YOUR NEW VCR (cont.) NOTES: • If you have made a component video connection and your TV’s component video connec tors support only high definition signal format, connect also the S-VIDEO or VIDEO connectors between the VCR and TV in order to view the picture of 480i image format[...]

Masterpage:Right-FullCol EN 15 Filename [HM-DH5U_Eng.fm] Digital Set Top Box Connection If you are using a HD Ready TV, you can m ake use of this connection to connect to the VCR. First, check the conten ts and situate the VCR as instructed in steps A and B on page 13. Then go to the following steps. C Connect VCR to Digital Set Top Box A Connect a[...]

Masterpage:Left-FullCol 16 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTINGS Plug & Play Setting Auto Clock Set/Auto Tuner Set This VCR sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting. The time and date can be set automatically[...]

Masterpage:Right-FullCol EN 17 Filename [HM-DH5U_Eng.fm] Clock Setting Perform clock se tting only if the clock has not been set correctly by the Plug & Play setting or if you use a cable box. Access the Clock Set screen to perf orm the Semiauto or Manual Clock Set. Each procedure starts from step C after preparation steps below are finished. I[...]

Masterpage:Left-FullCol 18 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTINGS (cont.) Setting clock semiautomatically — Semiauto Clock Set You can change the host chan nel/D.S.T. /time zone setting manually. First follow steps A to B on page 17, then go to the following steps. C Access Auto Clock Set screen Then; To select the host ch annel — go to [...]

Masterpage:Right-FullCol EN 19 Filename [HM-DH5U_Eng.fm] Setting clock manually — Manual Clock Set First follow steps A to B on page 17, then go to the following s teps. C Access Manual Clock Set screen Press [ FG ] to move the arrow to “MANUAL CLOCK SET”, then press [OK]. D Set time E Set date Press [ D E ] until the desired date appears, th[...]

Masterpage:Left-FullCol 20 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTING (cont.) Tuner Setting Setting channels automatically — Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, use Manual Channel Set ( A page 21). A Access Main Menu screen Pres[...]

Masterpage:Right-FullCol EN 21 Filename [HM-DH5U_Eng.fm] Setting channels manually — Manual Channel Set You can add the channels you want or delete the channels you do not want manually. A Access Main Menu screen Press [MENU]. B Access Tuner Set Up screen A Press [ D E ] to move the arrow to “TUNER SET UP”, then press [ G ] or [OK]. B Press [[...]

Masterpage:Left-FullCol 22 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTING (cont.) Cable Box Control Setting Suggested location Place the cable box on top of the VCR. Attach the VCR’s Controller to the top of the VCR with the Controller’ s transmitter pointed towards the cable box’s remote sensor. The following procedure is re quired if you rece[...]

Masterpage:Right-FullCol EN 23 Filename [HM-DH5U_Eng.fm] Setting cable box input channel & brand After installation, set the cable box input channel and its brand correctly; otherwise, the Controller cannot work correctly. A Turn on cable box Select a channel other than channel 9 on your cable box. B Access Main Menu screen on VCR Press [MENU].[...]

Masterpage:Left-FullCol 24 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTING (cont.) E Enter cable box brand F Engage test mode Press [ FG ] to move the arrow to “TEST MODE”, then press [OK]. NOTE: If you do not engage the test mode in step F , “INPUT CH” and “BRAND” are not set. • If the cable box’s channe l does not change to 9 A Press[...]

Masterpage:Right-FullCol EN 25 Filename [HM-DH5U_Eng.fm] DBS Receiver Control Setting Suggested location Place the DBS (Direct Broadcast Satellite) receiver on top of the VCR. Attach the VCR’ s Controller to the top of th e VCR with the Co ntroller’s trans mitter pointed towards the DBS receiver’s remote sensor. The following procedure is req[...]

Masterpage:Left-FullCol 26 EN Filename [HM-DH5U_Eng.fm] INITIAL SETTING (cont.) Setting DBS receiver input channel & brand After installation, set the DBS receiver’s input channel and its brand correctly; otherw ise, the Controller ca nnot work correctly. A Turn on DBS receiver Select a channel other than channel 100 or 205 on your DBS receiv[...]

Masterpage:Right-FullCol EN 27 Filename [HM-DH5U_Eng.fm] NOTES: • The Controller may not work with all types of DBS receiver. • If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels. In this case, make sure to leave the DBS re ceiver turned on and tuned to the proper channel before the sch[...]

Masterpage:Left-FullCol 28 EN Filename [HM-DH5U_Eng.fm] PLAYBACK Basic Playback This VCR can check the tape condition during playback (and recording), and realize the best possible pictures. • This VCR can play back tapes that have been recorded in D-VHS (MTP), S-VHS, S-VHS ET and VHS formats and automatically identifi es the recording format. ?[...]

Masterpage:Right-FullCol EN 29 Filename [HM-DH5U_Eng.fm] Basic Playback Features A Checking tape position The position of “ Z ” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape. NOTES: • “SUPERIMPOSE” must be set to “ON”, or the indicator will not appear ( A page 66). • It may take a few second[...]

Masterpage:Left-FullCol 30 EN Filename [HM-DH5U_Eng.fm] PLAYBACK (cont.) C Adjusting tracking condition — Tracking Adjustments Automatic tracking adjustment This VCR automatically adju sts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working an d continuously analyzes the signal to enable optimu[...]

Masterpage:Right-FullCol EN 31 Filename [HM-DH5U_Eng.fm] E Automatic operations after rewinding — Next Function Memory The Next Function Memory tells the VCR what to do after rewinding is complete. • Ensure that the VCR is in stop mode. a– For Automatic Playback Start Press [REW ( O )], then press [PLAY ( I )] within 2 seconds. b– For Autom[...]

Masterpage:Left-FullCol 32 EN Filename [HM-DH5U_Eng.fm] PLAYBACK (cont.) Some D-Theater tapes or D-VHS tapes may contain m ultiple pr ograms, angles, sounds or subt i tles. If a ta pe contains them, the icons appear on the top right corner of the TV screen when you press [OSD]. PROG. 2 PROG. 1 Program Selection During normal playback, pre ss [TV/VC[...]

Masterpage:Right-FullCol EN 33 Filename [HM-DH5U_Eng.fm] Special Effect Playback With this VCR, you can en joy special effect playback such as high-speed search, variable-speed search, and still playback and so on. A Locating particular scene rapidly — Picture Sear ch L High-Speed Picture Search Possible during normal playback or still picture pl[...]

Masterpage:Left-FullCol 34 EN Filename [HM-DH5U_Eng.fm] PLAYBACK (cont.) B Viewing still picture — Still Pictur e Playback Press [PAUSE ( W W W W )] during normal playback. The pause indicator [ W ] on the front display panel lights up. Playback is freezed and a still picture appears. To resume normal playback, press [PLAY ( I )]. NOTES: • To o[...]

Masterpage:Right-FullCol EN 35 Filename [HM-DH5U_Eng.fm] RECORDING Basic Recording NOTES: • When a new D- VHS tape is inserted, “AUT” is always selected regardless of the previous recording speed selected. • You can perform D-VHS recording of a program which is timer-programmed on your Integrated HDTV (or Digital Set Top Box) by using ‘i.[...]

Masterpage:Left-FullCol 36 EN Filename [HM-DH5U_Eng.fm] RECORDING (cont.) D-VHS/S-VHS/VHS Recording A Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. • The [D-VHS], [S-VHS] or [VHS] indicator on the front display panel will light up respectively i n accordance to [...]

Masterpage:Right-FullCol EN 37 Filename [HM-DH5U_Eng.fm] Basic Recording Features A Changing display information Press [DISPLAY]. Each time you press the button, the front display panel shows the clock time, remaining ti me and the time counter in sequence. • The remain [ r ] indicator will be displayed when the front display panel shows the rema[...]

Masterpage:Left-FullCol 38 EN Filename [HM-DH5U_Eng.fm] RECORDING (cont.) C Watching one program while recording another 1 Engage TV mode During recording... • Change the TV’s input mode from AV to TV. 2 Select channel for viewing Select the channel you want to watch, on the TV. D Showing on-screen display When “SUPERIMPOSE” is set to “ON[...]

Masterpage:Right-FullCol EN 39 Filename [HM-DH5U_Eng.fm] Other useful functi ons for recording You can also use the fo llowing functions for recording. • “V. CALIBRATION” (S-VHS/VHS only) ( A page 63) When this function is se t to “ON”, th is VCR checks the condition of the tape in use during playback and recording, and compensate s to pr[...]

Masterpage:Left-FullCol 40 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING VCR Plus+ ® Timer Programming Timer record ing allows you to pr ogram the VCR to automatically record a broad cast at some fu ture time. Up to 24 timer recording prog rams can be mad e using VCR Plus+ timer programming or Express timer programming method ( A page 44) as far as[...]

Masterpage:Right-FullCol EN 41 Filename [HM-DH5U_Eng.fm] D Input receiving channel number Press [ D E ] to input the number of the channel on which the broadcast for the PlusCode number is received on the VCR or cable box, then press [OK]. • The Guide Channel Set screen appears only when you input the Pl usCode number of a station for which the g[...]

Masterpage:Left-FullCol 42 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) Changing VCR Plus+ ® Setting To ensure that VCR Plus+ timer recording operates correctly, it is nece ssary to set the VCR Plus+ “Guide Channel Set” for each stat ion. Read the following information caref ully. VCR Plus+ guide channel matching The VCR Plus+ programm[...]

Masterpage:Right-FullCol EN 43 Filename [HM-DH5U_Eng.fm] A Access Main Menu screen Press [MENU]. B Access Guide Channel Set screen C Input guide channel number In that case, it is possi ble to change the channel by 10 channels by pressing and holding [ D E ] in steps C and D . D Input receiving channel number E Return to normal screen Press [MENU].[...]

Masterpage:Left-FullCol 44 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) Express Timer Programming You can directly program the VC R’s timer to record up to 24 broadcasts, as far as a year in advance. Rem ember, the clock must be set before you can program the timer ( A page 17). A Load a cassette Make sure the record safety tab is intact.[...]

Masterpage:Right-FullCol EN 45 Filename [HM-DH5U_Eng.fm] H Set recording speed Press [REC SPEED] to se t the recording speed. I Return to n ormal scre en Press [ D E ] to move the arro w to “CONFIRM”, then press [OK]. “PROGRAM COMPLETED PRESS [TIMER] TO ENTER TIMER STANDBY MODE” appears on the screen, then press [OK] to return to normal scr[...]

Masterpage:Left-FullCol 46 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) A Checking program settings 1 Disengage timer Press [TIMER ( j )], then press [ POWER]. • When “AUTO TIMER ” ( A page 66) is set to “ON”, you do not have to press [TIMER ( j )]. 2 Access Program List screen 3 Access Program screen Press [ FG ] to select a prog[...]

Masterpage:Right-FullCol EN 47 Filename [HM-DH5U_Eng.fm] Satellite Auto Recording This function allows you to automatic ally record a satellite program which is timer-programmed on your DBS receiver. Preparation : Connect a DBS receiver to the [AUDIO/ VIDEO INPUT L-1] or [S VIDEO INPUT L- 1] connectors* on the rear; o therwise, you cannot use this [...]

Masterpage:Left-FullCol 48 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) i.LINK Timer Programming This VCR can perform D-VHS recording of a program which is timer-p rogrammed on your Integrated HD TV (or Digital Set Top Box). A Load a D-VHS cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before i[...]

Masterpage:Right-FullCol EN 49 Filename [HM-DH5U_Eng.fm] Video Remote Control Timer Programming This VCR can perform analog recording of a progr am which is timer-p rogrammed on your Integrated HD TV (or Digital Set Top Box). A Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the [...]

Masterpage:Left-FullCol 50 EN Filename [HM-DH5U_Eng.fm] TIMER RECORDING (cont.) END of TIMER RECORDING ATTENTION: • If there is a conflict in the ti mer schedule and one program overlaps wit h another, only the parts shown below in gray will be recorded. Pattern 1 : The program with the lower program number will be recorded. Pattern 2 : The progr[...]

Masterpage:Right-FullCol EN 51 Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION Navigation Playback This function is useful when you want to quickly find programs you have recorded on a tape using this VCR. This function allows you to select a program to watch, and then automatically search for the beginning of the program. A Load a cassette Insert a tap[...]

Masterpage:Left-FullCol 52 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) A Deactivating Video Navigation If you do not want to store program information, you can deactivate the Video Navigation function. 1 Access Video Navigation screen Press [NAVI]. 2 Access Navigation Set Up screen 3 Deactivate Video Navigation 4 Return to normal screen P[...]

Masterpage:Right-FullCol EN 53 Filename [HM-DH5U_Eng.fm] Finding Tapes You can find a tape you want using Video Navigation. You have four methods to find tapes; by tape number, by program title, by category, by recording date, and by tape remaining time. A Finding by tape number Use the Remote to do the followi ng operations. 1 Access Video Navigat[...]

Masterpage:Left-FullCol 54 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) B Finding by program title Use the Remote to do the following operations. 1 Follow steps 1 to 2 on page 53, then go to the following steps 2 Access title screen 3 Confirm lists • To go to another page of the lists, pre ss [<] or [>]. • To play back the desire[...]

Masterpage:Right-FullCol EN 55 Filename [HM-DH5U_Eng.fm] D Finding by recording date Use the Remote to do the followi ng operations. 1 Follow steps 1 to 2 on page 53, then go to the following steps 2 Access date screen 3 Confirm lists • To go to another page of the lists, press [<] or [>]. • To play back the desired program, refer to ‘T[...]

Masterpage:Left-FullCol 56 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) E Finding blank space You can find a tape who se re maining time is enough for a program you want to record. Use the Remote to do the following operations. 1 Access Video Navigation screen Press [NAVI]. 2 Access Blank Space List screen 3 Set condition 4 Select tape num[...]

Masterpage:Right-FullCol EN 57 Filename [HM-DH5U_Eng.fm] Editing Titles When you record a TV program on this VCR, the VCR automatically records the reco rding start time, date, and channel in each program title. If the tape is recorded for the first time, the tape number and the date and time are recorded in the tape title. You can then edit the ta[...]

Masterpage:Left-FullCol 58 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) 5 Access edit screen 6 Enter title Press the ‘Number’ keys to enter the title. • For entering the characters as the titl e, refer to ‘How to enter the characters and symbols’ on the right column. (In th is example, enter “JVC NEWS”.) B Press [ FGD E ] to [...]

Masterpage:Right-FullCol EN 59 Filename [HM-DH5U_Eng.fm] B Entering or Editing program title When you want to edit the program title, follow the procedure below by using the Remote. 1 Load a cassette Insert a tape on which t here is a program you want to edit. 2 Access Video Navigation screen Press [NAVI]. 3 Select program 4 Access edit screen 5 En[...]

Masterpage:Left-FullCol 60 EN Filename [HM-DH5U_Eng.fm] VIDEO NAVIGATION (cont.) C Editing program category When you want to change th e program category, follow the procedure below by using the Remote. 1 Load a cassette Insert a tape on which there is a program you want to edit. 2 Access Video Navigation screen Press [NAVI]. 3 Select program Press[...]

Masterpage:Right-FullCol EN 61 Filename [HM-DH5U_Eng.fm] E Deleting program information When you want to delete th e stored information for each recorded program, follow the procedure below by using the Remote. • Program information for the Video Navigat ion function is deleted, but the recorded program will not be erased. 1 Load a cassette Inser[...]

Masterpage:Left-FullCol 62 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS Useful Function Settings You can use the other useful function settings on the Function Set Up screens by following the procedure described below. The table below shows the stru cture of the menu system. • For the functions you can set on the Function Set Up screen, se[...]

Masterpage:Right-FullCol EN 63 Filename [HM-DH5U_Eng.fm] Video settings “ VIDEO FUNCTION” *The default setting is bold in the table below. L L L L “V. CALIBRATION” (S-VHS/VHS only) “ON” “OFF” When this functio n is set to “ON”, th is VCR checks the condition of the tape in use during playback and recording, and compen sates to p[...]

Masterpage:Left-FullCol 64 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS (cont.) Audio settings “ AUDIO FUNCTION” *The default setting is bold in the table below. L L L L “STD AUDIO REC MODE” “STANDARD” “PCM&STANDARD” You can select the audio format when you r ecord a program or analog signal from connected devices in STD [...]

Masterpage:Right-FullCol EN 65 Filename [HM-DH5U_Eng.fm] Input/Output settings “ IN/OUT FUNCTION” *The default setting is bold in the table below. L L L L “TV OUTPUT 1 ” “WIDE 16:9” “NORMAL 4:3” Select the appropriate mode dependi ng on the type of TV you ha ve. “WIDE 16:9” : Select this for a wide TV se t with 16:9 screen image[...]

Masterpage:Left-FullCol 66 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS (cont.) *The default setting is bold in the table below. Additional settings “ ADDITIONAL” *The default setting is bold in the table below. L L L L “REAR AUX L-1” “VIDEO” “S-VIDEO” You have to select which terminal - either [VIDEO ] (composite) or [S VIDE[...]

Masterpage:Right-FullCol EN 67 Filename [HM-DH5U_Eng.fm] *The default setting is bold in the table below. L L L L “POWER SAVE” “ON” “OFF” When this function is set to “ON ”, you can reduce the power consumption. While the VCR is turned off, the front displ ay panel does not show the clock. When this function is set to “ON”, an i[...]

Masterpage:Left-FullCol 68 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS (cont.) *The default setting is bold in the table below. L L L L “S-VHS E T” “ON” “OFF” This function allows you to record on VHS tapes with S-VHS pi cture quality. Tapes recorded using this function can be played back on a VCR equipped with the S-VHS ET func[...]

Masterpage:Right-FullCol EN 69 Filename [HM-DH5U_Eng.fm] JLIP ID Number Setting The JLIP (Joint Level I nterface Protocol) terminal i s used to connect the VCR to a pers onal computer or similar device. By connecting throug h the JLIP terminals, you can control the VCR during editing and certain other operations, from the connect ed personal comput[...]

Masterpage:Left-FullCol 70 EN Filename [HM-DH5U_Eng.fm] OTHER USEFUL FUNCTIONS (cont.) i.LINK Set Up i.LINK set up for connected device When you connect i.LINK co mpatible devices to this VCR, an i.LINK device number is assigned to each device in the order of connection. If you want to change the number, follow the procedure below. A Access Main Me[...]

Masterpage:Right-FullCol EN 71 Filename [HM-DH5U_Eng.fm] What is i.LINK? i.LINK is a digital serial interface that allows devices equipped with an i.LINK connector to exchange digital video signals, digi tal audio signals, and device control signals bi-directionally over a single cable. i.Link refers to the IEEE1394- 1995 industry specification and[...]

Masterpage:Left-FullCol 72 EN Filename [HM-DH5U_Eng.fm] EDITING i.LINK/DV Connections NOTES: • You cannot use the i.LINK conne ction depending on the type of camcorder equipped with the DV connector. In this case, set “LINC” to “OFF” ( A page 70). • If the 44.1 kHz PCM audio signal is input via DV connector, recording cannot be performe[...]

Masterpage:Right-FullCol EN 73 Filename [HM-DH5U_Eng.fm] A Make connections A Connection with the camcorder Connect a DV cable between the camcorder’s DV connector and your VCR’s [i.LINK] connector. B Connection with the VCR Connect an i.LINK cable between the playback VCR’s i.LINK input/output connector and the recording VCR’s [i.LINK IN /[...]

Masterpage:Left-FullCol 74 EN Filename [HM-DH5U_Eng.fm] EDITING (cont.) S-VIDEO/VIDEO Connections A Make connections A Connection with the camcorder Connect an audio/S-vi deo cable between the camcorder’s audio/S-video output connectors and your VCR’s [AUDIO/ S VIDEO] input connectors. • When the JVC camcorder is equipped with the Master Edit[...]

Masterpage:Right-FullCol EN 75 Filename [HM-DH5U_Eng.fm] B Connection with the VCR Connect an audio/S-video cable between the playback VCR’s au dio/S-video output connectors and the recording VCR’s [AUDIO/ S VIDEO INPUT] connectors. • When using this VCR as the recording VCR, connect this VCR’s [AU DIO/S VIDEO INPUT] connectors to the audio[...]

Masterpage:Left-FullCol 76 EN Filename [HM-DH5U_Eng.fm] MULTI-BRAND REMOTE CONTROL TV Brand Setting When programmed (set) with a manufacturer’s (brand’s) code, this Remote can pe rf orm some of the remote control functions of the listed TVs. You can control a JVC TV without setting a brand code. A Turn on the TV Turn on the TV using the Power b[...]

Masterpage:Right-FullCol EN 77 Filename [HM-DH5U_Eng.fm] Cable Box or DBS Receiver Brand Setting When programmed (set) with a manufacturer’s (brand’s) code, this Remote can perf orm some of the remote control functions of the list ed cable boxes or DBS (Direct Broadcast Satellite) receivers. If your cable box does not function with a specified [...]

Masterpage:Left-FullCol 78 EN Filename [HM-DH5U_Eng.fm] MULTI-BRAND REMOTE CONTROL (cont.) Changing Remote Control Code NOTE: When “POWER SAVE” is set to “ON”, you can not change the remote control code. Before ch anging the code, set “POWER SAVE” to “OFF” ( A page 67). The Remote is capable of controlling four JVC video recorders i[...]

Masterpage:Right-FullCol EN 79 Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING Before requesting service, use this chart and see if you can r epair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair. POWER TAPE TRANSPORT PLAYBACK SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1.[...]

Masterpage:Left-FullCol 80 EN Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING (cont.) PLAYBACK RECORDING TIMER RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 9. Sound cannot be heard. • When a HDMI to DVI conversion cable is connected between the VCR and TV, you need to connect the audio cable as well to receive sound output. • A HDMI t o HDMI co[...]

Masterpage:Right-FullCol EN 81 Filename [HM-DH5U_Eng.fm] TIMER RECORDING VIDEO NAVIGATION SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 4. [ j ] blinks on the front display panel. • The timer is engaged but there is no cassette loaded. •[ T I M E R ( j )] has been pressed when there are no programs in memory, or the timer recording program has not b[...]

Masterpage:Left-FullCol 82 EN Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING (cont.) VIDEO NAVIGATION OTHER PROBLEMS SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 2. The VCR cannot search for the desired program. • Two (or more) tape numbers are recorded on one tape. • The inserted program is not recorded on this VCR. Video Navigation cannot work correct[...]

Masterpage:Right-FullCol EN 83 Filename [HM-DH5U_Eng.fm] The following conditions are pr oduct features and do not indi cate mechanical problems. Playback of tapes recorded in D-VHS mode • You may see a mosaic (block) noise, grayed images, or a still image in cases of excessive distortion caused when playing back a damaged tape or when the heads [...]

Masterpage:Left-FullCol 84 EN Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING (cont.) Error Codes and Messages Some error codes and messages may appear on the TV screen when operating the VCR. Refer to the chart below for the solution. CODE MESSAGE DESCRIPTION 102 “REC PROHIBITED” • An attempt was ma de to make a D-VHS recording of a program for wh[...]

Masterpage:Right-FullCol EN 85 Filename [HM-DH5U_Eng.fm] * For details of a digital tuner, refer to the inst ruction manual of the digital tuner. CODE MESSAGE DESCRIPTION 300 “CAN NOT DECODE VIDEO OR AUDIO USE SET TOP BOX OR HDTV TUNER” • A signal format that is not supported by this VCR w as input. • Use a digita l tuner*, etc. 301 “TOO [...]

Masterpage:Left-FullCol 86 EN Filename [HM-DH5U_Eng.fm] TROUBLESHOOTING (cont.) Questions and answers PLAYBACK Q. What happens if the tape reaches its end du ring playback or search? A. The VCR automatic ally rewinds it to the beginning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q. Can the VCR indefinit[...]

Masterpage:Right-FullCol EN 87 Filename [HM-DH5U_Eng.fm] GLOSSARY Glossary Digital Broadcasts and D-VHS Great changes in the entertainment and media industries are transforming the way we use VHS, and digital broadcasting is a good example of what the future holds. Digital broadcasting now allows more efficient use of the limited broadcas t spectru[...]

Masterpage:Left-FullCol 88 EN Filename [HM-DH5U_Eng.fm] LIST OF TERMS List of terms This guide serves as a quick w ay to locate frequently used terms and on-screen display names. A Accidental erasure prevention 39 Audio Monitor 30 Auto Daylight Saving Time 18 AUTO SP N EP TIMER 66 AUTO TIMER 66 Automatic tracking 30 AV COMPU-LINK 67 C Cable box set[...]

Masterpage:Right-FullCol EN 89 Filename [HM-DH5U_Eng.fm] SPECIFICATIONS GENERAL Power requirement : AC 120 V H , 60 Hz Power consumption Power on : 45 W Power off : 14 W Temperature Operating : 5°C to 40 °C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 435 mm x 96 mm[...]

Masterpage:Left-FullCol 90 EN Filename [HM-DH5U_Eng.fm] WARRANTY (Only in U.S.A.) USA ONLY JVC COMPANY OF AMERICA (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase for the period shown below. (“Th[...]

Masterpage:Right-FullCol EN 91 Filename [HM-DH5U_Eng.fm] MEMO HM-DH5U_Eng.fm Page 91 Tuesday, June 1, 2004 4:47 PM (X:100.0%, Y:100.0%) Created with Grafikhuset CMYK PDF Creator for keiji tanaka at Sanwa Document Services P/L.[...]

HM-DH5U Printed in Malaysia 0604MNH-SW -VM U ATTENTION JVC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, CLAIMS OR LIABILITIES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO THE USE OF THIS PRODUCT WITH ANY OTHER PRODUCT, DEVICE, COMPONENT, PART OR MATERIAL THAT IS NON-CONFORMING OR NON-C[...]