JVC KW-XC405 Bedienungsanleitung

ENGLISH CD/CASSETTE RECEIVER KW-XC406/KW-XC405 KW-XC406/KW-XC405 For canceling the display demonstration, see page 8. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0327-001A [U] Cover_KW-XC406_5_001A_f.indd 2 Cover_KW-XC406_5_001A_f.indd 2 8/3/05 10:37:10 AM 8/3/05 10:37:10 AM[...]

2 ENGLISH Warning: If you need to operate the unit while driving, be sure to look ahead carefully or you may be involved in a traffic accident. How to reset your unit This will reset the microcomputer. Your preset adjustments will also be erased. Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ens[...]

3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KW-XC406/KW-XC405 ............... 5 Parts identification ................................. 5 Remote controller — RM-RK50[...]

4 ENGLISH How to use the MODE button Press MODE repeatedly to select the different functions available during play. Time countdown indicator Ex.: When “SSM” is selected While listening to the radio: • You cannot select “SSM” or “SCAN” if you are listening to the station stored in the EX (extra) button, see page 10 for details. While l[...]

5 ENGLISH Control panel — KW-XC406/KW-XC405 1 Loading slot 2 (standby/on attenuator) button 3 DISP (display) button 4 MODE button 5 Cassette compartment 6 Remote sensor • DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting). 7 AUX (auxiliary) input jack 8 Number buttons 9 CD 0 (CD eject) button p Display wind[...]

6 ENGLISH Remote controller — RM-RK50 Main elements and features 1 (standby/on/attenuator) button • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 5 U (up) / D (down) ∞ buttons • Changes the FM/AM bands with 5 U only. • Changes the preset stations with D ?[...]

7 ENGLISH ~ Turn on the power. Ÿ For FM/AM tuner For your favorite station • Stored your favorite station, see page 10 for details. For CD/CD-CH Select “CD-CH” when using an Apple iPod ® or a JVC D. player (see page 22). iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. For TAPE/AUX * You cannot select[...]

8 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON] —see page 20. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select “CLOCK HOUR,” then adjust the hour. 2 Selec[...]

9 ENGLISH 2 Select the desired station frequencies. When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. Then, in step 2 , select “MONO OFF.” Storing stations in memory You can preset six stations[...]

10 ENGLISH Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To tune in to your favorite station (EX) If you press the button again, the previous source will be played back again. Scanning broadcast stations 1 2 Start scanning. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency ap[...]

11 ENGLISH 4 Finish the procedure. To erase the entire title In step 3 on the left... To change the information shown on the display * If no title is assigned, “NO NAME” appears for a while. Available characters Upper case Lower case Numbers and symbols Assigning titles to the stations You can assign titles to 30 station frequencies (including [...]

12 ENGLISH • When inserting an audio CD or a CD Text disc: To stop play and eject the disc The source changes to the last selected source. * 1 Either the MP3 or WMA indicator lights up depending on the detected file. * 2 Depending on the level meter setting. (See page 20 for details.) • When inserting an MP3 or a WMA disc: Disc operations Playi[...]

13 ENGLISH Playing discs in the CD changer About the CD changer It is recommended to use a JVC MP3- compatible CD changer with your unit. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs. • You cannot play any WMA disc in the CD c[...]

14 ENGLISH • When the current disc is an MP3 disc: • When the current disc is an audio CD or a CD Text disc: * 1 “ROOT” appears if no folder is included in the disc. * 2 Depending on the level meter setting. (See page 20 for details.) To fast-forward or reverse the track To go to the next or previous tracks To go to the next or previous fol[...]

15 ENGLISH Other main functions Skipping a track quickly during play • For MP3 or WMA disc, you can skip a track within the same folder. Ex.: To select track 32 while playing track 6 1 2 First time you press 5 / ∞ button, the track skips to the nearest higher or lower track with a track number of multiple ten (ex. 10th, 20th, 30th). Then each t[...]

16 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. Select your desired playback mode. 1 2 Repeat play Ex.: When “TRACK RPT” is selected Mode Plays repeatedly TRACK RP T : The current track. • RPT and light up. FOLD ER RP T * 1 : All tracks of the current folder. • and RPT light up. DISC R[...]

17 ENGLISH To change the playback direction To stop play and eject the cassette The source changes to the last selected source. To fast-forward or rewind a tape When the tape reaches its end while fast-forwarding, the tape direction will change automatically. To stop fast-forwarding or rewinding, press the PR OG but ton. Prohibiting tape ejection Y[...]

18 ENGLISH Sound adjustments Selecting preset sound modes (EQ: equalizer) You can select a preset sound mode suitable to the music genre. ~ Ÿ FLA T O Hard Ro ck O R & B O POP O JA Z Z O DanceMusic O Country O Reggae O Classic O USER 1 O USER 2 O USER 3 O (back to the beginning) To select the sound mode directly You can select the sound mode di[...]

19 ENGLISH Storing your own sound adjustments You can adjust the sound modes and store your own adjustments in memory. 1 2 Select one of the sound mode to adjust. Ex.: When “JAZZ” is selected 3 Select the sound elements to adjust while the selected sound mode is shown. LOW LE VEL O LOW FR EQ. O LOW W I DT H O MID LEV E L O MID WI DTH O HIG H L [...]

20 ENGLISH Indications Selectable settings, [reference page] DEMO MODE Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [8]. DEMO OF F : Cancels. CLOCK HOUR Hour adjustment 1 – 12, [8] [Initial: 1 (1:00)] CLOCK MIN Minute adjustment 00 – 59, [8] [Initi[...]

21 ENGLISH Indications Selectable settings, [reference page] DIMMER Dimmer AU TO : [Initial]; Dims the display when you turn on the headlights. ON : Activates dimmer. OFF : Cancels. CONTRAST Display contrast 1 – 10 : Adjust the display contrast to make the display indications clear and legible. [Initial: 5] SCROLL * 1 Scroll ONCE : [Initial]; Scr[...]

22 ENGLISH External component operations ~ For selecting the external component connected to.... • AUX input jack • CD changer jack on the rear using KS-U57 or KS-U58 If “EXT” does not appear, see page 21 and select the external input (EXT INPUT). • CD changer jack on the rear using interface adapter for iPod —KS-PD100 or for D. player?[...]

23 ENGLISH Handling cassettes To clean the head • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store). When the head becomes dirty, you may realize the following symptoms: – Sound quality is reduced. – Sound level decreases. – Sound drops out. • Do not touch the highly-polished hea[...]

24 ENGLISH More about this unit Basic operations Turning on the power • By pressing the source buttons on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the ignition key without turning off this unit, the unit will automatically turn on when you turn on the ignitio[...]

25 ENGLISH • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, and for the following causes: – Discs are dirty or scratched. – Moisture condensation occurs on the lens inside the unit. – The pickup lens inside the unit is dirty. – CD-R/CD-RW on which the files are written with “Packet Write” me[...]

26 ENGLISH Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “CD” or “CD-CH” for the playback source, disc play starts from where it has been stopped previously. Ejecting a disc • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted a[...]

27 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. To be continued.... Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all.[...]

28 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how the tracks are recorded on the disc. • “NO FILES” appears on t[...]

29 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic disto[...]

© 2005 Victor Company of Japan, Limited EN, TH 0805DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KW-XC406_5_001A_f.indd 2 Rear_KW-XC406_5_001A_f.indd 2 7/26/05 9:28:47 AM 7/26/05 9:28:47 AM[...]

KW-XC406/KW-XC405 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0327-005A [U] 0805DTSMDTJEIN EN, TH ENGLISH • This unit is designed to operate on 12 V DC, NEGA TIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC[...]

2 INST ALLA TION (IN-DASH MOUNTING) The following illustration shows a typical installation. However, you should make adjustments corresponding to your specific car. In this case consult the manual included with the installation kit (option). In some case, depending of the type and the model of your car, it is not possible to install the unit into [...]

3 ENGLISH ‰∑¬ A Typical Connections / °“√‡™◊ËÕ¡µËÕ·∫∫ª°µ‘ Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. 1 Connect the colored leads of the power cord in the order specified in the illustration below. 2 Connect the antenna cord. 3 Finally conn[...]

4 Connecting the external amplifiers / °“√µËÕ‡æ‘Ë¡‡µ‘¡‡¢È“°—∫Õÿª°√≥ÏÕ◊Ëπ B You can connect an amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • Disconnect the spe[...]

CD/CASSETTE RECEIVER KW-XC404 For canceling the display demonstration, see page 8. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0328-001A [UI] Cover_KW-XC404[UI]f.indd 2 Cover_KW-XC404[UI]f.indd 2 8/3/05 6:21:08 PM 8/3/05 6:21:08 PM[...]

2 Warning: If you need to operate the unit while driving, be sure to look ahead carefully or you may be involved in a traffic accident. How to reset your unit This will reset the microcomputer. Your preset adjustments will also be erased. Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your[...]

3 How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KW-XC404 ....... 5 Parts identification ................................. 5 Remote controller — RM-RK50 ... 6 Main elements and [...]

4 How to use the MODE button Press MODE repeatedly to select the different functions available during play. Time countdown indicator Ex.: When “SSM” is selected While listening to the radio: • You cannot select “ SSM ” or “ SCAN ” if you are listening to the station stored in the EX (extra) button, see page 10 for details. While liste[...]

5 Control panel — KW-XC404 1 Loading slot 2 (standby/on attenuator) button 3 DISP (display) button 4 MODE button 5 Cassette compartment 6 Remote sensor • DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting). 7 AUX (auxiliary) input jack 8 Number buttons 9 CD 0 (CD eject) button p Display window q 5 (up) / ∞[...]

6 Remote controller — RM-RK50 Main elements and features 1 (standby/on/attenuator) button • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 5 U (up) / D (down) ∞ buttons • Changes the FM/AM bands with 5 U only. • Changes the preset stations with D ∞ only.[...]

7 ~ Turn on the power. Ÿ For FM/AM tuner For your favorite station • Stored your favorite station, see page 10 for details. For CD/CD-CH Select “ CD-CH ” when using an Apple iPod ® or a JVC D. player (see page 22). iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. For TAPE/AUX * You cannot select these[...]

8 Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON] —see page 20 . 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select “ CLOCK HOUR, ” then adjust the hour. 2 Select “[...]

9 2 Select the desired station frequencies. When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. Then, in step 2 , select “MONO OFF.” Storing stations in memory You can preset six stations for eac[...]

10 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To tune in to your favorite station (EX) If you press the button again, the previous source will be played back again. Scanning broadcast stations 1 2 Start scanning. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency appears on[...]

11 4 Finish the procedure. To erase the entire title In step 3 on the left... To change the information shown on the display * If no title is assigned, “ NO NAME ” appears for a while. Available characters Upper case Lower case Numbers and symbols Assigning titles to the stations You can assign titles to 30 station frequencies (including both F[...]

12 • When inserting an audio CD or a CD Text disc: To stop play and eject the disc The source changes to the last selected source. * 1 Either the MP3 or WMA indicator lights up depending on the detected file. * 2 Depending on the level meter setting. (See page 20 for details.) • When inserting an MP3 or a WMA disc: Disc operations Playing a dis[...]

13 Playing discs in the CD changer About the CD changer It is recommended to use a JVC MP3- compatible CD changer with your unit. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs. • You cannot play any WMA disc in the CD changer. [...]

14 • When the current disc is an MP3 disc: • When the current disc is an audio CD or a CD Text disc: * 1 “ROOT” appears if no folder is included in the disc. * 2 Depending on the level meter setting. (See page 20 for details.) To fast-forward or reverse the track To go to the next or previous tracks To go to the next or previous folders (fo[...]

15 Other main functions Skipping a track quickly during play • For MP3 or WMA disc, you can skip a track within the same folder. Ex.: To select track 32 while playing track 6 1 2 First time you press 5 / ∞ button, the track skips to the nearest higher or lower track with a track number of multiple ten (ex. 10th, 20th, 30th). Then each time you [...]

16 Selecting the playback modes You can use only one of the following playback modes at a time. Select your desired playback mode. 1 2 Repeat play Ex.: When “TRACK RPT” is selected Mode Plays repeatedly TRACK RP T : The current track. • RPT and light up. FOLD ER RP T * 1 : All tracks of the current folder. • and RPT light up. DISC RPT * 2 :[...]

17 To change the playback direction To stop play and eject the cassette The source changes to the last selected source. To fast-forward or rewind a tape When the tape reaches its end while fast-forwarding, the tape direction will change automatically. To stop fast-forwarding or rewinding, press the PR OG but ton. Prohibiting tape ejection You can l[...]

18 Sound adjustments Selecting preset sound modes (EQ: equalizer) You can select a preset sound mode suitable to the music genre. ~ Ÿ FLA T O Hard Ro ck O R & B O POP O JA Z Z O DanceMusic O Country O Reggae O Classic O USER 1 O USER 2 O USER 3 O (back to the beginning) To select the sound mode directly You can select the sound mode directly u[...]

19 Storing your own sound adjustments You can adjust the sound modes and store your own adjustments in memory. 1 2 Select one of the sound mode to adjust. Ex.: When “JAZZ” is selected 3 Select the sound elements to adjust while the selected sound mode is shown. LOW LEVEL O LOW FREQ. O LOW WIDTH O M ID LE VEL O MI D WI DTH O HIGH L EV EL O HI GH[...]

20 Indications Selectable settings, [reference page] DEMO MODE Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [8]. DEM O OFF : Cancels. CLOCK HOUR Hour adjustment 1 – 12, [8] [Initial: 1 (1:00)] CLOCK M I N Minute adjustment 00 – 59, [8] [Initial: 00[...]

21 Indications Selectable settings, [reference page] DIMMER Dimmer AU TO : [Initial]; Dims the display when you turn on the headlights. ON : Activates dimmer. OFF : Cancels. CONTRAST Display contrast 1 – 10 : Adjust the display contrast to make the display indications clear and legible. [Initial: 5] SCROLL * 1 Scroll ONCE : [Initial]; Scrolls the[...]

22 External component operations ~ For selecting the external component connected to.... • AUX input jack • CD changer jack on the rear using KS-U57 or KS-U58 If “ EXT ” does not appear, see page 21 and select the external input (EXT INPUT). • CD changer jack on the rear using interface adapter for iPod — KS-PD100 or for D. player — K[...]

23 Handling cassettes To clean the head • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store). When the head becomes dirty, you may realize the following symptoms: – Sound quality is reduced. – Sound level decreases. – Sound drops out. • Do not touch the highly-polished head with a[...]

24 More about this unit Basic operations Turning on the power • By pressing the source buttons on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the ignition key without turning off this unit, the unit will auto matically turn on when you turn on the ignition key n[...]

25 • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, and for the following causes: – Discs are dirty or scratched. – Moisture condensation occurs on the lens inside the unit. – The pickup lens inside the unit is dirty. – CD-R/CD-RW on which the files are written with “ Packet Write ” method. [...]

26 Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “ CD ” or “ CD-CH ” for the playback source, disc play starts from where it has been stopped previously. Ejecting a disc • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again[...]

27 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. To be continued.... Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset t[...]

28 Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how the tracks are recorded on the disc. • “ NO FILES ” appears on the dis[...]

29 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. L[...]

© 2005 Victor Company of Japan, Limited EN 0805DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KW-XC404[UI]f.indd 2 Rear_KW-XC404[UI]f.indd 2 8/3/05 6:21:15 PM 8/3/05 6:21:15 PM[...]

KW-XC404 Installation/Connection Manual GET0328-002A [UI] 0805DTSMDTJEIN EN • This unit is designed to operate on 12 V DC, NEGA TIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. Parts list for installation and connection The following parts [...]

2 Connecting the external amplifiers B A Typical Connections Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. 1 Connect the colored leads of the power cord in the order specified in the illustration below. 2 Connect the antenna cord. 3 Finally connect the wiring harness to the[...]