JVC LVT1002-001B Bedienungsanleitung

LVT1002-001 B [B] HOME CINEMA CONTR OL CENTER D VD VIDEO PLA YER RX-ES1SL XV -N55SL INSTR UCTIONS For Customer Use: Enter below the Model No . and Ser ial No . which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference. Model No . Se r ia l No. cover.RX-ES1&XV-N55[B]f 03.2.18, 1:42 PM[...]

G-1 W arnings, Cautions and Others IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an[...]

G-2 CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) • Do not place any naked flame sources, such as lighted candles, on the apparatus. • When discarding batteries, environmental problems must be considered and local[...]

G-3 Caution: Proper V entilation for XV -N55SL T o av oid risk of electr ic shoc k and fire and to protect from damage. Locate the apparatus as follows: Front: No obstructions open spacing. Sides: No obstructions in 3 cm from the sides. T op: No obstructions in 5 cm from the top. Back: No obstructions in 15 cm from the back Bottom: No obstructions,[...]

G-4 SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the operating instructions before you attempt to u[...]

1 T able of Contents Par ts identification ................................................ 2 Getting star ted ...................................................... 5 Precautions ................................................................................. 5 Checking the supplied accessories ............................................ 5 Putti[...]

2 Remote control P ar ts identification 3 r y f q 7 o ; a g j k l z / s i u t e w p 9 8 6 4 5 2 1 d h c b v x See pages in parentheses for details. 1 TV DIRECT button (13) 2 Standby/on b uttons (11, 36, 62 – 64) A UDIO, D VD , VCR , STB , TV 3 Source selecting buttons (11) D VD , VCR, STB , TV , D VD MUL TI, FM/AM 4 CHANNEL +/ – buttons (62 –[...]

3 Front panel 1 ST ANDBY/ON button and ST ANDBY lamp (11) 2 TV DIRECT button (13) 3 SETTING button (16, 17, 19) 4 ADJUST button (21, 31, 33, 34) 5 SURROUND button (31, 33) 6 Display window (see below) 7 Source indicators D VD MUL TI, D VD , STB, VCR, TV , FM/AM STANDBY / ON STANDBY TV DIRECT SETTING ADJUST SURROUND DVD MULTI DVD STB VCR TV FM / AM [...]

4 Front panel Display window XV -N55SL See pages in parentheses for details. P arts identification 1 button (36) 2 ST ANDBY/ON indicator (36) 3 Display window 4 Remote sensor (5) 5 Disc tray (37) 6 0 button (37) 7 4 button (39, 40) 8 ¢ button (39, 40) 9 7 button (37, 38) 0 3 button (37, 39) - 8 button (38, 39) 1 Audio format indicators 2 Disc indi[...]

5 Getting star ted Putting batteries in the remote control Before using the remote control, put two supplied batteries first. 1 Press and slide the b uttery co ver on the bac k of the remote contr ol. 2 Inser t batteries. Make sure to match the polarity: (+) to (+) and ( – ) to ( – ). 3 Replace the co ver . If the range or eff ectiveness of the[...]

6 NOTES • If the AM (MW) loop antenna wire is cov ered with vinyl, remove the vinyl while twisting it as shown on the right. • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception. Snap the tabs on the loop into the slots of the base to assemble the AM (MW) loop ante[...]

7 Getting Started Connecting the speakers and DVD player T urn off all components before connections. Speaker Layout Diagram After connecting the front, center and surround speak ers, and/or a subwoof er , set the speaker setting inf ormation proper ly to obtain the best possible surround eff ect. For details , see pages 15 to 18. Connecting the fr[...]

8 NOTES • When shipped from the factory , the DIGIT AL IN terminals hav e been set for use with the following components: – DIGIT AL 1 (coaxial): For DVD player – DIGIT AL 2 (optical): For STB (Set T op Box) – DIGIT AL 3 (optical): For TV tuner If you connect other components, change the digital input (DIGIT AL IN) terminal setting correctl[...]

9 AM LOOP ANTENNA VD N AUDIO L R L R AM EXT CENTER FRONT AV IN / OUT AV IN SUBWOOFER OUT DIGITAL IN DIGITAL 3 (TV) DIGITAL 2 (STB) DIGITAL 1 (DVD) CENTER SPEAKER SURROUND SPEAKERS RIGHT LEFT RIGHT LEFT FRONT SPEAKERS SUB WOOFER SURR (REAR) CAUTION: SPEAKER IMPEDANCE 8 ~ 16 VCR TV DVD STB AV IN/OUT AV IN TV VCR STB VCR TV DVD STB * RX-ES1SL Getting [...]

10 Connecting the power cord When all the audio/video connections hav e been made, connect the AC po wer plug to the wall outlet. Make sure that the plugs are inser ted firmly . The ST ANDBY lamp on the receiver and indicator on the D VD pla yer light in red. • K eep the power cord a wa y from the connecting cables and the antenna. The power cord[...]

11 When operating the receiver using the remote control, always set the mode selector to A UDIO/TV/VCR/STB. RX-ES1SL Basic operations ANALOG SUBWFR LFE VOL LC R LS RS DVD MULTI DVD (DVD DIGITAL) STB (STB DIGITAL) VCR TV (TV DIGITAL) FM AM (Back to the beginning) 2 Select the source to play On the front panel: T urn SOURCE SELECT OR until the source[...]

12 3 Adjust the volume T o increase the volume, turn MASTER V OLUME contr ol cloc kwise (or press V OLUME + on the remote contr ol). T o decrease the volume, turn MASTER V OLUME contr ol counterc lockwise (or press V OLUME – on the remote contr ol). CA UTION: Always set the volume to the minimum before starting any sources. If the volume is set a[...]

13 Basic operations The following are the analogue/digital signal format indicators on the display to indicate what type of signal comes into the receiv er . ANALOG: Lights when analogue input is selected. LPCM: Lights when Linear PCM signal comes in. DOLBY D: • Lights when Dolby Digital signal comes in. • Flashes when “ DGTL D.D. ” is sele[...]

14 Basic adjustment of auto memory This receiver memorizes sound settings for each source: • when you turn off the pow er, • when you change the source, and • when you change the analogue/digital input mode (see page 11). When you change the source, the memorized settings for the newly selected source are automatically recalled. The following[...]

15 RX-ES1SL Speaker settings Setting the speakers information automatically—Smart Surround Setup The distance from your listening point to the speakers is one of the impor tant element to obtain the best possible sound eff ect for the Surround/DSP modes. Y ou need to set the dela y time of the center and surround speakers relative to the front sp[...]

16 Setting the speakers and subwoofer information quickly — Quick Setup Entering the use of the subwoofer , the number of the speak ers, and your room siz e, the center and surround speakers ’ delay time is automatically calculated. • When you change your speakers, register the information about the speakers again. • Y ou can also set the c[...]

17 Speaker settings When selecting “ MEDIUM ROOM, ” • Center speaker delay time is set to1 msec. • Surround speakers delay time is set to 2 msec. ANALOG SUBWFR VOL LR SUBWFR FRNT SP LFE DIGITAL IN AUTO SR MODE QUICK SETUP (Back to the beginning) CNTR SP SURR DL CROSS CNTR DL D.COMP SURR SP 3 T urn MUL TI JOG to select the appropriate settin[...]

18 Setting the speaker delay time — CNTR DL (center speaker delay), SURR DL (surr ound speakers delay) Y ou can set the speak er delay time easily b y using Smart Surround Setup (see page 15) or Quick Setup (see page 16). The distance from your listening point to the speakers is one of the important element to obtain the best possible surround so[...]

19 Operating procedure On the front panel ONL Y : Before y ou start, remember ... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. 1 Press SETTING. MUL TI JOG now works f or the setting operation. 2 T urn MUL TI JOG until the setting item you want to set appears on the displa[...]

20 Setting Auto Surround — AUTO SR Y ou can enjo y Surround mode simply by selecting the source (with digital input selected for that source). Select “ ON ” when activating A uto Surround. ON: • If multi-channel signal comes in, an appropriate Surround mode will be turned on. • If Dolby Digital 2 channel or DTS 2 channel signal including [...]

21 RX-ES1SL Sound adjustments When operating the receiver using the remote control, always set the mode selector to A UDIO/TV/VCR/STB. ANALOG SUBWFR VOL LR BASS TREBLE PANORAMA B.BOOST ATT (Back to the beginning) SUBWFR SURR R EFFECT SURR L BAL CENTER ANALOG SUBWFR VOL LR Operating procedure On the front panel: Before y ou start, remember ... There[...]

22 Setting the subwoofer audio position When a stereo source is played back, the subwoofer sound is reinforced compared to the sound from a multi-channel source. Once you have set the subwoofer audio position, the subwoofer output level is decreased by the selected value when a stereo source is play ed back. The A (audio).POSITION indicator lights [...]

23 RX-ES1SL T uner operations The buttons on the remote control are mainly used for tuner operations. T o use b uttons on the remote control, press FM/AM before operation. When operating this receiver using the remote control, always set the mode selector to A UDIO/TV/VCR/STB. T uning in to stations manually From the remote control ONL Y : 1 Press [...]

24 3 Press the numeric b uttons (1 – 10, +10) to select a channel n umber while the channel number position is flashing. • For channel number 5, press 5. • For channel number 15, press +10, then 5. • For channel number 30, press +10, +10, then 10. 4 Press MEMOR Y again while the selected channel number is flashing on the displa y . The stat[...]

25 Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. When tuned to an FM station which provides the R[...]

26 PTY codes Searching for a program by PTY codes One of the adv antages of the RDS ser vice is that you can locate a particular kind of program from the preset channels (see pages 23 and 24) by specifying the PTY codes. T o search for a program using the PTY codes Before y ou start, remember ... • The PTY Search is only applicable to preset stat[...]

27 TA NEWS/INFO TA/INFO NEWS TA/NEWS/INFO INFO TA/NEWS (None) Switching to broadcast program of your choice temporarily Another convenient RDS service is called “ Enhanced Other Networks. ” This allows the receiver to switch temporarily to a broadcast program of y our choice (T A, NEWS, and/or INFO) from a different station except in the follow[...]

28 * Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. RX-ES1SL Creating realistic sound fields Reproducing theater ambience In a movie theater , many speakers are located on the w alls to reproduce impressive multi-surround sound, reaching you from all di[...]

29 Creating realistic sound fields DTS ** DTS is another digital signal compression method, developed by Digital Theater Systems, Inc., and enables m ulti-channel encoding and decoding. DTS Digital Surround is another discrete 5.1 channel digital audio format available on CD, LD, and DVD software. Compared to Dolby Digital, the DTS Digital Surround[...]

30 About relations between speaker layout and Surround/DSP modes A vailable Surround/DSP modes will v ar y depending on ho w many speakers are used with this receiv er. Make sure that y ou have set the speakers inf ormation correctly (see pages 15 to 18). • If only front speakers are connected, you cannot use the Surround modes. • If surround s[...]

31 Creating realistic sound fields 3 Press TEST to chec k the speakers output balance. “ TEST L ” star ts flashing on the display , and a test tone comes out of the speakers as follow: 4 Adjust the f ollowing speaker output levels (from – 10 dB to +10 dB). • Make adjustments so that the sound level of the selected speaker is set at the same[...]

32 Using DSP modes Once you have adjusted the DSP modes, the adjustment is memorized for each source. • Y ou cannot use the DSP modes if no surround speak ers are connected. • Y ou cannot adjust the eff ect le vel f or “ ALL CH ST . ” When operating this receiver using the remote contr ol, alwa ys set the mode selector to A UDIO/TV/VCR/STB.[...]

33 4 Adjust the surround speaker output le vels (from – 10 dB to +10 dB). • Make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers. T o adjust the left surround speaker le vel, press SURR L +/ – . T o adjust the right surround speaker le vel, press SURR R +/ – . Ex.: When sele[...]

34 RX-ES1SL Using the D VD MUL TI pla ybac k mode This receiv er provides the D VD MUL TI playback mode f or reproducing the analogue discrete output mode (5.1 channel reproduction) of the D VD play er. In addition, the D VD MUL TI playbac k mode can be used for reproducing a D VD A udio sound. Before playing back a DVD, refer also to the manual su[...]

35 XV -N55SL/LET0230 -0 04A/English Bef o re operation About this ma nual • The display windo w inf ormation and OSD (On Screen Display) menu items are put in brac kets [ ] in the operat ion procedures. • Usable disc(s) for each operation/function is (are) referred to by the icons; About di scs Playable disc types Discs with the f ollowing mar [...]

36 XV -N55SL/LET0230 -0 04A/English Basic operations NO T E T urni ng on/off the play er Press D VD on the remote control or press on the fr ont panel. The ST ANDBY/ON indicator on t he front panel, which lights in red during standby , lights in green. The left and right sides of the displa y window are illuminated. The opening display appears on t[...]

Basic operations 37 XV -N55SL/LET0230 -0 04A/English 5 Press ENTER. The third page is shown, in wh ich the pull-down menu of the [DIGIT AL A UDIO OUTPUT] is already open. 6 Press 5 / ∞ to sele ct a desired digital output signal type. Set this item correctly when y ou connect the play er to an external surround decoder or D/A conv er ter . (If y o[...]

Basic operations 38 XV -N55SL/LET0230 -0 04A/English T o check the playba ck status Y ou can see the current selection number (the title/chapter number for D VD VIDEO or track number for SVCD/Video CD/ Audio CD), time inf orm ation (the trac k or chapt er time while stopped, or elapsed trac k or chapter time during pla yback) and the transpor t sta[...]

Basic operations 39 XV -N55SL/LET0230 -0 04A/English T o resum e playback When the re sume mode is “ON” While the disc you int errupted playbac k is still on the disc t ray , press 3 . The player resumes play back from the position where playbac k was interrupted. The TV screen shows “RESUME PLA Y . ” T o pla y ba c k from the begi nning Pr[...]

Basic operations 40 XV -N55SL/LET0230 -0 04A/English T o repla y the previous sc enes (One touch replay functio n) During D VD VIDEO playback , press . The playbac k position mov es back 10 seconds bef ore the current position. NO TES • This function works only within the same titl e, though it w ork s between chapters. • This function may not [...]

41 XV -N55SL/LET0230 -0 04A/English Ad vanced operations NO TE Playing from a spe cific position Locating a desired scene from the DVD menu D VD VIDEO discs generally have their own menus which show the disc contents. These menus contain various items s uch as titles of movies, names of songs, or ar tist inf ormation, and display them on the TV scr[...]

Advanced operations 42 XV -N55SL/LET0230 -0 04A/English Locating a de sired positi on in the current title or track (Time sear ch) Y ou can pla y a disc from t he desired position by speci fying the time from the beginning of the current t itle (f or D VD V IDEO) or the disc (for SVCD/Video CD/Audio CD). For D V D VIDEO /Audio CD: During pla yback [...]

Advanced operations 43 XV -N55SL/LET0230 -0 04A/English 4 Press th e numeric buttons to s pecify tracks in the desi red or der . T o sel ect 5: press 5. T o select 23: press +10, +10, then 3. T o select 40: press +10, +10, +10, then 10. T o correct the pr ogram Pres s 5 / ∞ to mov e to the track to be corrected, then press CANC EL. The track is e[...]

Advanced operations 44 XV -N55SL/LET0230 -0 04A/English Repeat play back T o repea t the current sel ection or all trac ks For D V D VIDEO: Dur ing playback For SVCD/Video CD/Audio CD: In any condition except SVCD/ Video CD playback with PBC Press REPEA T . If you press REPEA T in stop mode, press 3 to sta rt playbac k. Each time you press REPEA T [...]

Advanced operations 45 XV -N55SL/LET0230 -0 04A/English Changing the langua ge, sound and scene a ngle T o selec t the subtitle lan guage (SUBTITL E) Some D V D VIDEO and SV CD discs cont ain more than one subtitle language. Y ou can c hoose a desired one from them. Hint At the beginning of the par t where the subtitl es are recorded, appears on t [...]

Advanced operations 46 XV -N55SL/LET0230 -0 04A/English Special picture/sou nd effect T o zoom in pictures 1 During playbac k or while paused, press ZOOM. Pressing ZOOM causes the play er to zoom in on the image. At the top left of t he screen, the inf o r mation f or the current magnification appears for about 5 seconds. Each time you press ZOOM, [...]

Advanced operations 47 XV -N55SL/LET0230 -0 04A/English T o dismiss the VFP mode sel ection wind ow Pres s VFP . NO TE The window f or VFP mode selection and parameter setting disappear if no operation is made for about 10 seconds. T o simu late surround sou nd (3D PHONIC) Using the 3D PHONIC function, you can get a simulated surround effect from y[...]

Advanced operations 48 XV -N55SL/LET0230 -0 04A/English Menu bar fun ctions for D VD VIDEO Ti me mode selec tion During playbac k, selects the time mode shown in the displa y window and in t he status bar . Press EN TER to select the t ime mode from the f ollowing. • TO T AL: Current title elapsed time • T .REM : Current title remaining time ?[...]

49 XV -N55SL/LET0230 -0 04A/English MP3/WMA disc pla ybac k NO TE Operation s The play er can play back MP3 files and WMA files on a home recorded CD-R/ R W disc or commercially avai lab l e CD . We ref er to a disc that contains MP3 and/or WMA files as an “MP3/WMA disc” in this manual. Note that if a disc contains both of M P3/WMA files and JP[...]

MP3/WMA disc playback 50 XV -N55SL/LET0230 -0 04A/English Hint Y ou can also select a desired tr ack b y pressing 3 to m ov e the black bar to the right (trac k) column then using 5 / ∞ . NO TES • If an MP 3/WMA file name includes any 2- b yte character , the play er cannot show t he file name correctly . • Only MP3/WMA files are shown on the[...]

51 XV -N55SL/LET0230 -0 04A/English JPEG disc pla ybac k NO T E Note that if a disc contains both of M P3/WMA files and JP EG files, y ou can only pla y back files of the type selected by t he [MP3&WM A/JPE G ] setting in the [PICTURE] preference displa y (see page 56). About JPEG discs On a JPEG disc, each picture is recorded as a file . Files[...]

JPEG dis c play back 52 XV -N55SL/LET0230 -0 04A/English NO T ES • The player supports the bas eline JPEG format. • The player does not suppor t “packet writing (UDF format)” disc s. • The player supports disc s recorded with multiple s essions. • The play er ma y not be ab le to read some discs, or ma y take a long time to dis pla y a [...]

JPEG disc playback 53 XV -N55SL/LET0230 -0 04A/English Repeat functi on In the slide show mode, y ou can repeat playback of JPEG files in a group or on the disc. 1 While the JPEG CONTROL display is shown, press REPEA T . Pressing RE PEA T switches the repeat mode. When the repeat mode is tur ned on, the [ ] indicator lights in the displa y window .[...]

54 XV -N55SL/LET0230 -0 04A/English Changing the initial settings NO TE Selecting pre ferences This section refers to the s ettings which are already made when you purchase the play er . Read this s ection when you want to connect this pla yer to a wi de-vision TV set, or when you want to otherwise change the settings accord ing to your pref erence[...]

Changing the initia l settings 55 XV -N55SL/LET0230 -0 04A/English LANGUAGE m enu MENU LANGUAGE Y ou can select the def ault menu language to be displa yed i f it is contained on a D VD VIDEO disc . Set ting options ENGLISH, SP ANISH, FRENCH, CHINESE, GERMAN, IT AL IAN, JAP ANESE, lang ua ge co de fr om AA t o ZU • If the disc does not hav e a me[...]

Changing the initial settings 56 XV -N55SL/LET0230 -0 04A/English MP3&WMA/JPEG The pla yer can pla y MP 3/WM A and JPE G files recorded on a CD-R/CD-RW disc. Howe ver , if a disc contains both MP3/W MA and JPEG files , y ou can only play fil es of the type selected in this men u it em. Set ting options MP3&WMA, JPEG [MP3& WMA]: when sel[...]

Changing the initia l settings 57 XV -N55SL/LET0230 -0 04A/English Limiting playba ck by children This function r estricts playbac k of D VD VIDEO discs which contain violent (and other) scenes accor ding to the lev el set by the user . F or e xample, if a movie which includ es violent scenes suppor ts the parental lock f eature, such scenes which [...]

Changing the initial settings 58 XV -N55SL/LET0230 -0 04A/English T o chan ge the settings Y ou can change the parental lock settings later . 1 Bring up the O THERS menu. 2 Press 5 / ∞ to move to select [P ARENT AL LOCK] and press ENTER. The parental lock on-screen displa y appears on the TV screen. 3 While is pointing to [P ASSWORD], press the n[...]

59 XV -N55SL/LET0230 -0 04A/English Appendix A: Country/Area code lis t for Parent al Lock (f or page 57) AD Andorra AE United Arab Emirates AF Afghani stan AG Antigua and B arbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa A T A ustr ia A U Austr alia AW A r u b a AZ Aze rbaijan[...]

60 XV -N55SL/LET0230 -0 04A/English Appendix B: T able of l anguag es and their ab breviat ions Appendix C: Digital outpu t signal chart AA Afar F A P ersia n KM Cambo dian OM (Af an) Orom o SU Sun da nese AB Ab khazian FI Finnish KN Kannada OR Oriya SV S wedish AF Afrika ans FJ F iji K O Korean (KOR) P A P an jabi SW Swahil i AM Amehar ic FO Faroe[...]

61 XV -N55SL/LET0230 -0 04A/English Appendix D: Glossary Aspect ratio A ratio which defines the shape of t he rectangular picture in a TV . It is the width of t he picture relativ e to the height. A conv entional TV picture is 4:3 in aspect ratio . Bitstream The digital f orm of multichannel audio data (e.g., 5. 1-channel) before it is decoded into[...]

62 Operating other JVC pr oducts Y ou can use the remote control to operate not only this receiver but also other JVC pr oducts. • Refer also to the manuals supplied for the other products. – Some JVC VCRs can accept two types of the control signals—remote codes “A” and “B”. This remote control can operate a VCR whose remote control c[...]

63 By changing the transmittab le signals, y ou can use the remote control supplied f or this unit to operate other manufacturers’ equipment. • Refer also to the manuals supplied with the other products. • T o operate those components with the remote control, first y ou need to set the manuf acturers’ codes each f or the STB, VCR, and TV . [...]

64 Manufacturer Codes JVC 01* AKAI 02, 36 BELL+HOWELL 03, 16 BLAUPUNKT 04 CGM 03, 05, 16 DAEWOO 34 DIGITAL 05 FISHER 03, 16 G.E. 06 GRUNDIG 07 HITACHI 08, 09 LOEWE 05, 10, 11 MAGNAVOX 04, 05 MITSUBISHI 12 – 15 NOKIA 16 NORDMENDE 17 – 19, 31 ORION 20 PANASONIC 21 PHILIPS 05, 22 PHONOLA 05 SABA 17 – 19, 23, 31 SAMSUNG 24, 25 SANYO 03, 16 SHARP [...]

65 T r oubleshooting Use this char t to help you solv e daily operational problems . If there are any problems you cannot solv e, contact your JVC’ s service center. RX-ES1SL POSSIBLE CA USE The power cord is not plugged in. Speaker signal cables are not connected. An incorrect source is selected. Muting is activated. An incorrect input mode (ana[...]

66 PROBLEM Surround mode cannot be selected. DSP mode cannot be selected. Continuous hiss or buzzing during FM reception. Occasional cracking noise during FM reception. SOLUTION Play not multi-channel software or check the speaker setting. Play back Linear PCM or analogue software or check the speaker setting. Connect an outdoor FM antenna or conta[...]

67 T roubleshooting POSSIBLE CA USE P ower plug is not inser ted securely . Region code of the inserted disc does not match the pla yer . Microcomputer malfunction due to lightning or static electricity . Moisture condensation caused by a sudden change of temperature or humidity . The disc does not allow the operation, or an unplayable disc is inse[...]

68 Specifications Designs & specifications are subject to change without notice. Amplifier Output P ower At stereo operation: Front channels: 100 W per channel, min. RMS, both channels driven into 8 Ω at 1 kHz with no more than 10% total harmonic distortion. (IEC268-3) At surround operation: Front channels: 100 W per channel, min. RMS, driven[...]

69 Specifications General Readable discs: D VD VIDEO, D VD-R (Video format), D VD- RW (Video f or mat), +R W (Video format), SVCD , Video CD , Audio CD (CD-D A), MP3/ WMA f or mat, JPEG, CD-R/R W (CD-D A, SVCD , Video CD , MP3/WMA f or mat, JPEG) Video format: P A L Other Power requirements: AC 230 V , 50 Hz Power consumption: 12 W (POWER ON) 0.7 W[...]

EN 0203NHMMDWJEIN VICT OR COMP ANY OF JAP AN, LIMITED  2003 VICTOR COMPANY OF JAPAN, LIMITED cover.RX-ES1&XV-N55[B]f 03.2.18, 1:42 PM 2[...]