Kenmore 790.9031 Bedienungsanleitung

Use & Care Guide Gu_a de uso y cuidada English / Espafiol Model/Modelos: I<en 790.9031 _ @ coo s __©e% ee P/N 316902007 Rev A Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A. www.kenmore.com www.sears.com[...]

Table of Contents Appliance Warranty ............................................................................. 2 Important Safety Instructions ......................................................... 3-6 Product Record/Serial Plate Location ............................................... 6 Before Setting Oven Controls .........................[...]

Important Safety Instructions Read all instructions before using this appliance. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. Definitions _This is the alert It is used to alert to safety symbol. you potential personal injury hazards, Obey aJJ safety messages[...]

Important Safety Instructions NEVER cover any slots, holes or passages in the oven bottom or cover an entire oven rack with materials such as aluminum foil. Aluminum toll linings may trap heat, causing a fire hazard. DO NOT LEAVE CHILDREN ALONE m children should not be left alone or unattended in the area where appliance is in use. They should neve[...]

Irnportant Safety Instructions iMPORTANT iNSTRUCTiONS FOR USING YOUR COOKTOP * Know which knob controls each surface heating unit. Place a pan of food on the surface element unit before turning it on, and turn the element off before removing the pan. * Use proper pan size m This appliance is equipped with one or more surface units of different size[...]

Important Safety Instructions iMPORTANT iNSTRUCTiONS FOR CLEANING YOUR RANGE iMPORTANT iNSTRUCTiONS FOR SELF- CLEANING OVENS Before manually cleaning any part of the range, be sure aii controls are turned OFF and the range is COOL. The range may be hot and can cause burns. • Clean the range regularly to keep all parts free of grease that could ca[...]

Before Setting Oven Controls Oven vent location The oven vent is located under the Jeff rear surface e|emen| (See Fig. 1). When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block oven vent. Fig. 1 Removing, replacing and arranging racks Always use[...]

Before Setting Surface Controls Using proper cookware The size and type of cookware used wiii influence the radiant element power levei setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in both Figs. 1 &2. Fig. 1 Check for flatness by rotating a ruler across the bottom of the[...]

Before Setting Surface Controls About the surface elements The element temperature rises gradually and evenly. As the temperature rises, the element will glow red. For efficient cooking, turn OFF the surface element just before cooking is complete. This will allow residual heat to complete the cooking process. Surface elements may appear to have co[...]

Setting Surface Controls Surface element settings The size and type of utensil used, and the amount and type of food being cooked wiil influence the surface element power level setting needed for best cooking results. The suggested settings found in Fig. 1 below are based when cooking with medium-weight aluminum pans with lids. Settings may vary wh[...]

Simmer Select Element SIMMER ELEMENT The left front element control may be used as a normal element or as a simmer element. The Simmer Select feature heats the element at a much lower power level than when used as a normal surface element. You may switch between normal cooking and the Simmer Select feature at any time during the cooking process. Wh[...]

Oven Control Functions For satisfactory use of your oven, become familiar with the various key pad functions and features of the oven. c) 0) o Select Clean 4; ® @ o Timer Sot/Off o Cook Time . o LTi • OVE. Delay _ 8/_:' ® PREHEAT Start _9 _' • DOOR LOCKED WARM '_5/ OVEN & HOLD LOCKOUT Function indicator lights- These ligh[...]

Setting Oven Controls Changing temperature display (°F or °C) The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The display may be changed to show either Fahrenheit or Celsius oven temperatures. To change temperature display made from °F to °C (Celsius) or from °C to °F (Fahrenheit): 1. Press Broil [...]

Setting Oven Controls Oven Lockout The control may be programmed to lockout the oven control key pads and oven door. OVEN LOCKOUT To activate OVEN LOCKOUT feature: 1. Be sure oven door is completely dosed. [] 2. Press and hold STOP key pad for 3 seconds. Loc will appear in the display. The DOOR LOCKED indicator light will flash and the motor driven[...]

Setting Oven Controls Setting Cook Time Use Cook Time to set the amount of time needed for baking. The oven will turn on immediately and stop automatically after the set cool< time ends. FOOD POISONING HAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness. Foods that can eas[...]

Setting Oven Controls Setting Delay Start Delay Start allows you to set a delayed starting time to the oven baking or cleaning functions. FOOD POiSONiNG HAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness. Foods that can easily spoil such as mill<, eggs, fish, meat or poul[...]

Setting Oven Controls Convec. Bake Benefits of convection cooking: ° Foods cook up to 25 to 30% faster, saving time and energy. ° Multiple rack baking. ° No special pans or bakeware needed. Convection functions use a fan to circulate the oven's heat uniformly and continuously around the oven. This improved heat distribution allows for lash [...]

Setting Oven Controls Broil Use the broil function to cool< meats that require direct exposure to flame heat for optimum browning results. The Broil function is factory preset to broil at 550°F. The suggested broil settings table (See Fig. 1) is provided for recommendations only. Increase or decrease broiling times, or move to a different rack [...]

Setting Oven Controls Warm & Hold TM Warm & Hold wiii keep cooked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm & Hold wiii shut-off automatically. Warm & Hold should only be used with foods that are already at serving temperatures. Warm & Hold wiii maintain the oven temperature at 170 ?[...]

Select Clean A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away aftwerwards with a damp cloth. The Select Clean function allows you to select 3 different cleaning times from 2, 3 or 4 hours. A 3-hour cleaning tim[...]

Select Clean When Select Clean begins the cleaning cycle, the motorized door latch mechanism wiii automatically start to lock the oven door and the DOOR LOCKED indicator light will flash. DO NOT open the oven door when the DOOR LOCKED indicator light is flashing. Allow about 15 seconds for the oven door to completely loci<. Once the oven door ha[...]

Care & Cleaning Cleaning recommendation table Surface type Recommendation Control knobs For general cleaning, use hot, soapy water and a cloth. For more difficult soils and Painted body parts built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30- Painted decorative trim 60 minutes. Rinse with a damp cloth and dr[...]

Care & Cleaning General cleaning Refer to the Cleaning recommendation fable in the Core _x Cleaning section for more detailed information about cleaning specific parts of the range. Before manually cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. The range may be hot and can cause burns. Ammonia must be[...]

Care & Cleaning Surface elements and drip bowls J_JJ_i]J_J Surface elements may appear to have cooled after they have been turned off. The surface elements may still be hot and burns may occur if touched before they have cooled sufficiently. Protective liners m Do not use aluminum foil to line surface drip bowls, or reflector pans. Only use alu[...]

Care & Cleaning Raising and lowering the cooktop (some models) To avoid possible burns DO NOT turn the surface elements on when the cooktop is raised. Be sure that the top is completely lowered and securely in place before turning on any of the surface burners. When lowering the lift-up range cooktop, grasp the sides with fingertips only. Be ca[...]

Care & Cleaning Removing and replacing the lift-off oven door To avoid possible injury when removing or replacing the oven door, follow the instructions below carefully and always hold the oven door with both hands positioned away from the door hinge area. The door is heavy. For safe, temporary storage, lay the door fiat with the inside of the [...]

Before You Call • Sobfions to common problems Before you call for service, review the following list. It may save you time & expense. Possible solutions to these problems are provided with the problem listed: Problem Solution Poor baking results. ° Many factors affect baking results. Make sure the proper oven rack position is used. Center fo[...]

Before You Call • Sobfions to common problems Problem Solution Oven smokes excessively when broiling. ° Incorrect setting. Follow broiling instructions in Setting Oven Controls section. ° Be sure oven door is opened to broil stop position when broiling. ° Meat too close to the broil element. Reposition the broil rack to provide proper clearanc[...]

Before You Call * Solutions to common problems Problem Solution Drip bowls are pitting or rusting. ° Foods with acids° such as tomatoes, if allowed to stand in/on bowls will cause corrosion. Remove and wash drip bowls as soon as possible after a spill over. * Normal environment. Along coastal areas, houses are exposed to high salt content in air.[...]

Notes 30[...]

Protection Agreements Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can save you money [...]

® Registered Trademark / TMTrademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries ® Marca Registrada / TMMarca de F&brica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros paises MD MC Marque de commerce / Marque depos_e de Sears Brands, LLC[...]