Land Rover Range Rover Sport (2013) Bedienungsanleitung

Range Rov er Spor t OWNER'S HANDBOOK Publication Part No. LRL 10 02 62 1 41 R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

ABOUT THIS HANDBOOK Please take the time to study all of the owner/operator literature supplied with your vehicle as soon as possible. IMPORTANT The information contained in this handbook covers all vehicle derivatives and optional equipment, some of which may not be fitted to your vehicle. Due to printing cycles, this handbook may include descript[...]

Introduction ...................................... 2 Entering the vehicle .......................... 5 Exiting the vehicle ........................... 13 Front seats ...................................... 17 Rear seats ....................................... 20 Head restraints ............................... 25 Steering wheel .....................[...]

4 L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

UNLOCKING THE VEHICLE 5 Entering the vehicle R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

Any person fitted with an implanted medical device should make sure that the device is kept at a distance of at least 22 cm (8.7 inches) away from any transmitter mounted in the vehicle. This is to avoid any possibility of interference between the system and the device. Interference may cause the implanted medical device to malfunction, causing ser[...]

4. Panic alarm: • Press and hold for 3 seconds (or press 3 times within 3 seconds) to activate the horn and the hazard lamps. • Once active for more than 5 seconds, the alarm can be cancelled by pressing the button and holding for 3 seconds (or pressing 3 times within 3 seconds). • The emergency alarm will also be cancelled if a valid Smart k[...]

GLOBAL OPENING Press and hold the unlock button for 3 seconds to unlock the vehicle and open all windows. To cancel global opening, press any of the buttons on the Smart key or operate the driver’s window switches. To stop a particular window opening, operate the relevant window switch. This feature can be enabled/disabled via the Vehicle Set-Up [...]

OPENING AND CLOSING THE TAILGATE While the tailgate is open, the locking latch is exposed. Do not attempt to manually close the latch as it may also automatically ‘soft close’ and trap items or body parts. Make sure there is minimum space of 1.5 metres (58 inches) above and at the rear of vehicle before operating the tailgate. Insufficient spac[...]

1. Tailgate open/close using the exterior button. Press to open, stop, reverse direction or close the tailgate. Note: The tailgate external release switch will operate if all doors are unlocked and the gear selector is in the Park ( P ) position. If the gear selector is in the Neutral ( N ) position the switch will only operate if all doors are unl[...]

Object detection while closing: If an object is detected that would interfere with a tailgate closing, tailgate movement will stop and then reverse to the fully open position if able to do so. An audible warning will be given to indicate a mislock. Remove any obstructions and if the tailgate is open, press the tailgate switch again to close the tai[...]

To replace the battery: 1. Remove the cover by sliding in the directions of the arrows. 2. Use the emergency key blade to separate the Smart key body. 3. Fit a new and unused CR2032 type battery (available from a Land Rover Dealer/Authorised Repairer) with the positive (+) side upwards. Note: Avoid touching the new battery. Moisture/oil from finger[...]

SINGLE LOCKING Press the lock button on the Smart key briefly to single lock the vehicle and activate the perimeter alarm. The hazard warning lamps will flash to confirm. Single locking secures the vehicle and prevents the doors from being opened from the outside. The doors may still be unlocked and opened from inside the vehicle. In this state, on[...]

INTERIOR PROTECTION The interior protection feature of the full alarm system may be temporarily disabled via the Vehicle Set-Up menu. See 46, INSTRUMENT PANEL MENU . Note: Once disabled, this setting will be re-enabled the next time the vehicle is double locked with the Smart key. KEYLESS LOCKING Never double lock the vehicle with people, children [...]

Press and hold the lock button on the Smart key for 3 seconds. The vehicle will single lock and the perimeter alarm will be activated immediately. After 3 seconds any open windows and the sunroof will be closed. Press the lock button twice in 3 seconds to double lock the vehicle. This feature can be enabled/disabled via the Vehicle Set-Up menu. See[...]

MISLOCK When attempting to lock the vehicle with the Smart key, if a valid key isn't present, if 1 or more of the doors, the bonnet or the tailgate is not fully closed or the ignition is ON, the vehicle will NOT lock and an audible warning will sound twice. Make sure the ignition is turned off and lock the vehicle again. The vehicle will NOT f[...]

ELECTRIC SEATS Do not adjust the seat while the vehicle is moving. Doing so could cause loss of vehicle control and personal injury. Note: This diagram covers all electric seat controls. Not all of these controls apply to all seats. 1. Cushion length. 2. Bolster inflate/deflate. 3. Lumbar support. 4. Seat back angle. 5. Head restraint height. 6. Se[...]

• Heated/climate control (see 75, CLIMATE CONTROL ). RESTRICTED FRONT SEAT TRAVEL If seat movement stops unexpectedly during adjustment, check for and remove any obstructions. Once any obstructions have been removed, the seat adjustment mechanism can be reset as follows: Operate the button again to continue the stalled adjustment. When seat movem[...]

FOLDING ARMREST Use the adjuster wheel ( 1 ) to set the required height. The folding armrest may be stowed by moving to the vertical position. SEAT POSITION MEMORY Once you have adjusted the power operated driver's seat, steering column (see 27, ADJUSTING THE STEERING WHEEL ) and exterior mirrors (see 61, EXTERIOR MIRRORS ) for your ideal driv[...]

MANUAL SEATS To adjust the angle of the seat back: 1. Lift the adjustment lever. 2. Adjust the seat back to the desired angle. 3. Release the adjustment lever. Forward and back adjustment. PASSENGER SEAT AWAY Use the switch for forward or rearward adjustment. 20 Rear seats L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.render[...]

The front passenger seat position can be adjusted to provide more space for rear seat occupants. FOLDING AND RAISING THE REAR SEATS Always make sure that objects carried in the vehicle are secured properly. Never allow passengers to travel in the load space under any circumstances. Make sure that when the seat back is raised, the locking mechanism [...]

To return the seat to the upright position, slide the seat rearward and raise the seat back until the latching mechanism clicks into position. Make sure that when the seat back is raised, the locking mechanism is fully engaged. When raising the rear seats, make sure that seat belts are correctly routed in the seat belt guides and not trapped behind[...]

FOLDING AND RAISING THE THIRD ROW SEATS To avoid injury, the loadspace cover must not be left in the installed position when the third row seats are occupied. Beware of trapping fingers when raising and lowering the third row seat. When raising the rear seats, make sure the seat belts are correctly routed into the seat belt guides and not trapped b[...]

Make sure nothing has been left under the third row seat, or in the footwell, when folding down the seat, as this could cause damage to the item or the seat. Always make sure that objects carried in the vehicle are secured properly. Never allow passengers to travel in the load space, under any circumstances. The third row seats can be folded or rai[...]

HEAD RESTRAINTS Adjust, so that the top of the head restraint is the same height as the top of the seat occupant's head. Incorrect adjustment increases the risk of death or serious injury in the event of a collision. Do not drive, or carry passengers with the head restraints removed from occupied seats. The absence of a correctly adjusted head[...]

Do not drive, or carry passengers with the head restraints removed from occupied seats. The absence of a correctly adjusted head restraint increases the risk of neck injury in the event of a collision or sudden stop. Manual head restraints may be removed, if required (e.g. to fit larger child seats). 1. Raise the head restraint to its uppermost pos[...]

ADJUSTING THE STEERING WHEEL Never adjust the steering column while the vehicle is in motion. 1. Manual adjustment: Move the locking lever (located under the column) downwards to unlock. Move the steering column up, down, in or out, to the desired position. Move the lever fully up to re-lock the column. 2. Electric adjustment: Move the control up o[...]

POWER STEERING A fault with the power steering system is indicated by a message in the Message centre, accompanied by an amber warning lamp (see 49, GENERAL WARNING/INFORMATION MESSAGE (AMBER) ). A reduction in power steering assistance may be experienced. The fault may be caused by overheating due to extensive steering inputs or high ambient tempe[...]

USING THE SEAT BELTS 1. Seat belt height adjustment: Press to release the catch. With the catch depressed move the mechanism slide up or down to the required height. Make sure the locking mechanism has engaged. When correctly positioned the seat belt should cross the collar bone at the mid-point between the neck and end of your shoulder. Where poss[...]

Never place anything between you and the seat belt in an attempt to cushion the impact in the event of an accident. It can be dangerous, and will reduce the effectiveness of the seat belt in preventing injury. 3. Fastening a seat belt: With the seat belt correctly positioned, place the metal tongue into the buckle nearest to you. Press it in until [...]

The seat belts should be inspected regularly to check for fraying, cuts, wear to the webbing and the condition and security of the mechanism, buckles, adjusters and mounting points. • With the seat belt fastened, give the webbing near the buckle a quick upward pull. The buckle must remain securely locked. • With the seat belt unfastened, unreel[...]

Note: The indicators will be displayed for 30 seconds each time there is a status change, e.g., a seat belt is unfastened or fastened or a door is opened and then closed. • In addition, an audible warning will sound under the following conditions: • The seat belt of an occupied front seat is not fastened or is unfastened during a journey. • A[...]

CHILD SAFETY LOCKS If children are to be carried in the rear seat positions, it is recommended that the rear door interior handles are disabled. Press the switch to activate the child door locks and inhibit the rear windows. The LED indicator will illuminate when active and a message will display in the Message centre. To switch off, press the swit[...]

The following symbols warn against the use of a rear-facing child seat in the front passenger seat, when a front passenger airbag is fitted and is operational. Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an airbag in front of it! This symbol is fixed to the end of the fascia on the passenger side. This symbol[...]

• For some child seats it may be necessary to remove the head restraint to ensure a stable fit. Always refit a removed head restraint after the child seat is removed. See 25, HEAD RESTRAINT REMOVAL . child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they [...]

RECOMMENDED CHILD SEATS Recommended seat Child size/age Britax/R ö mer Baby Safe Plus Groups 0 and 0+ Britax/R ö mer Duo Plus Group I Britax/R ö mer Kid Plus Group II and III 36 Child safety L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

ISOFIX ANCHOR POINTS Both of the outer seat positions on the rear, second row seat are equipped to accept ISOFIX restraints. This symbol is shown on a label sewn into the seats to indicate the position of the ISOFIX lower anchorages. To install an ISOFIX child seat:- 1. Raise or remove the head restraint. 2. ISOFIX anchor points are in the fold of [...]

ISOFIX child seat positions Rear outboard seats Fixtures Size classes Mass group as shown on child restraint X ISO L1/L2 F/G Carrycot IL* ISO R1 E 0 = Up to 10 kg (22 lb) 0-9 months IL* ISO R1/R2/R3 C/D/E 0+ = Up to 13 kg (29 lb) 0-18 months X IUF ISO R2/R3 ISO F2/F2X/F3 C/D A/B1/B I = 9 to 18 kg (20 to 40 lb) 9 months - 4 years N/A N/A N/A II = 15[...]

Your vehicle is equipped with anchorage points on the back of the second row seat frames. These should be used to attach straps from child seats or restraint systems. • Install the child restraint securely in 1 of the rear seating positions. • Pass the tether strap over the seat back and beneath the head restraint for the outer seat positions. [...]

AIRBAGS 1. Passenger front airbag. 2. Curtain airbag. 3. Side airbags. 4. Driver’s front airbag. Note: The general location of airbags fitted to the vehicle are marked by the word AIRBAG. Always contact your Dealer/Authorised Repairer if: • An airbag inflates. • The front or sides of the vehicle are damaged. • Any part of the airbag system [...]

Do not allow passengers to obstruct the operation of the airbags by placing any part of their person, or any objects, in contact with, or close to, an airbag module. Only use approved accessories (e.g. seat covers). Make sure a gap is maintained between the side of the vehicle, and the head and torso. This will enable unobstructed inflation of the [...]

FRONT AIRBAGS The front passenger and driver airbags have 2 levels of deployment, depending on the severity of the frontal impact. In a severe impact, the air bags inflate fully to offer maximum protection. In a lesser impact, full deployment is not required, so the airbags are inflated to a reduced pressure. SIDE AND CURTAIN AIRBAGS The seat mount[...]

The passenger front airbag can be switched on and off using the interactive controls on the Instrument panel when the vehicle is stationary. See 46, INSTRUMENT PANEL MENU The passenger airbag should be disabled only when a child restraint is fitted to the front passenger seat. Crash test data and statistics show that the safest place for a child to[...]

Do not use any electrical test equipment or devices in the vicinity of SRS components or wiring. Doing so may cause the system to trigger, or render the system inoperative. All of the following operations should only be carried out by a Dealer/Authorised Repairer, or suitably qualified person: • Removal or repair of any wiring or component in the[...]

INSTRUMENT PANEL 1. Tachometer. 2. Message centre. 3. Speedometer. 4. Temperature gauge. 5. Gear selector position display. 6. Total distance (odometer) and trip recorder. 7. Fuel gauge. If the amber low fuel warning lamp illuminates, the vehicle should be refuelled as soon as possible. The approximate distance that can be travelled on the remainin[...]

INSTRUMENT PANEL MENU A number of vehicle features and display settings may be configured via the instrument panel menu. To display and navigate through the instrument panel menu, operate the menu control on the steering wheel. 1. Steering wheel menu control. 2. Close and return to Main Menu. 3. Access the vehicle Driving Features menu. 4. Access t[...]

Warning messages may be accompanied by an audible warning, and the message text may have the handbook symbol next to it. Warning messages are displayed until the condition causing the fault is rectified or the message is suppressed using the OK button on the steering wheel. If a message is suppressed, an amber or red warning icon will remain illumi[...]

RANGE This shows the predicted distance (kilometres or miles) that the vehicle should travel on the remaining fuel, assuming fuel consumption and driving style remain constant. METRIC/IMPERIAL/MIXED DISPLAY The trip computer readings can be changed between metric, imperial and mixed units in the Trip Computer menu of the Message centre. See 46, INS[...]

WARNING LAMPS AND INDICATORS RED warning lamps are for primary warnings. A primary warning must be investigated immediately by the driver or qualified assistance before continuing. AMBER and YELLOW warning lamps are for secondary warnings. Some indicate that a vehicle system is in operation, others indicate that the driver must take action and then[...]

PARKING BRAKE (RED) Illuminates when the parking brake is correctly applied. If the lamp flashes, a fault has been detected. Seek qualified assistance urgently. BATTERY CHARGE (RED) Illuminates as a bulb check when the ignition is switched on and extinguishes when the engine is started. If the lamp remains on or illuminates while driving, there is [...]

ANTI-LOCK BRAKING SYSTEM (ABS) (AMBER) Illuminates briefly as a bulb check when the ignition is switched on. If the lamp remains on or illuminates while driving, there is a fault with the ABS system. Drive with care, avoiding heavy brake application and seek qualified assistance urgently. AIRBAG (AMBER) Illuminates as a bulb check when the ignition[...]

SIDE LAMPS (GREEN) Illuminates when the side lights are switched on. HIGH BEAM ASSIST (GREEN) Illuminates when the auto high beam feature has switched on the high beams. DIRECTION INDICATORS (GREEN) The appropriate warning lamp will flash when the direction indicators are operated. INTELLIGENT STOP/START (GREEN) Illuminates when the engine is shut [...]

LIGHTING CONTROL 1. With the headlamps on, push the control away from the steering wheel to select high beam. The warning lamp will illuminate. See 51, HIGH BEAM (BLUE) . Note: Do not use high beam where it may distract or dazzle other road users. 2. Pull the control towards the steering wheel and release to flash the high beam on and off. The high[...]

Unless required or prohibited by law, daytime running lamps can be disabled or enabled by a Land Rover Dealer/Authorised Repairer. HEADLAMP COURTESY DELAY This feature operates whenever the headlamp control is left in the AUTO position and the ignition is turned off. The headlamps will remain illuminated for up to 240 seconds. Note: The time delay [...]

If a system fault is detected the headlamps will attempt to move to the central position, and remain stationary. The AFS warning lamp will illuminate to indicate that a fault is present. See 51, ADAPTIVE FRONT LIGHTING SYSTEM (AMBER) . HEADLAMPS - DRIVING ABROAD The headlamps have a beam pattern that eliminates the need to mechanically adjust the l[...]

INTERIOR LIGHTS 1. Front seat footwell lamps: Automatically illuminate when the doors are opened. 2. Front reading lamps: Touch the left or right hand side of the sensor lens briefly to switch on/off. Note: To complete the operation, move your finger at least 20 mm (0.8 inches) from the lens. 3. Front courtesy lamp: Touch the centre of the sensor l[...]

8. Rear courtesy lamps: Controlled by the settings of the front interior lamp. 9. Loadspace lamps: Automatically illuminate when the tailgate is open. Unless Auto mode is switched off. INTERIOR LIGHTS INTENSITY Instrument illumination intensity can be adjusted, while the exterior lamps are turned on. See 298, DRIVER CONTROLS , Instrument illuminati[...]

WIPER OPERATION 1. Automatic rain sensing mode - The front wipers will respond and adapt automatically to the ambient rain conditions, selecting the appropriate wiper frequency for the prevailing conditions. The sensitivity of the system can be adjusted by rotating the collar ( 2 ). 2. Rotate the collar to adjust the sensitivity of the automatic ra[...]

Remove any snow, ice or frost from the screen, around the wiper arms and blades and the screen scuttle, before operating the wipers. Make sure the wipers are switched off before entering a car wash. If the automatic rain sensing system operates during the car washing process, damage may occur to the wiper mechanism. Note: If the wipers leave smears[...]

The headlamp power wash will operate on every fifth operation of the screen washer, provided the headlamps are still switched on and approximately 10 minutes have elapsed since the last headlamp wash. Switching the headlamps or ignition off and back on again, will reset the cycle. Note: The headlamp washers are inhibited when the washer fluid reser[...]

EXTERIOR MIRRORS 1. Left mirror adjustment. 2. Right mirror adjustment. 3. Press both switches together to fold/unfold the mirrors. Note: If the mirrors are manually folded or knocked into the folded position accidentally, the mirror head will be loose. To re-engage the mechanism, fold, then unfold the mirrors using the switches. A thermal cut-out [...]

MIRROR DIP WHEN REVERSING Selecting reverse gear will cause the door mirrors to automatically adjust, providing an improved viewing angle for reversing. The exact dipped position can be adjusted when the mirrors are dipped. The next time reverse is selected, the newly adjusted position will be selected. When the gear selector is moved out of revers[...]

BLIND SPOT MONITOR The Blind Spot Monitor (BSM) system is a supplement to, not a replacement for, a safe driving style and correct use of the exterior and rear view mirrors. The system may not function under all speeds, weather and road conditions. The BSM may not be able to give adequate warning of vehicles approaching very quickly from behind or [...]

The Blind Spot Monitor (BSM) system monitors an area adjacent to your vehicle, that is not easily visible to the driver. The system is designed to identify any road user overtaking your vehicle ( 3 ) that is within this blind spot, while disregarding other objects which may be stationary or travelling in the opposite direction. Note: Refer to the w[...]

CLOSING VEHICLE SENSING The closing vehicle detection system is a supplement to, not a replacement for, a safe driving style and use of the exterior and rear-view mirrors. The radar sensors may be impaired by mud, rain, frost, ice, snow or road spray. This may affect the system's ability to reliably detect an approaching vehicle. Please note t[...]

Note: The closing vehicle detection system is disabled when a trailer is attached. Note: When BSM is disabled through the instrument panel menu (see 46, INSTRUMENT PANEL MENU ) the closing vehicle detection system is also disabled. BSM SENSORS The BSM system will automatically disable if either of the sensors become completely obscured, an amber wa[...]

GARAGE DOOR TRANSCEIVER Do not use the transceiver with any garage door opener that lacks the safety stop and reverse feature as required by safety standards. When programming the transceiver to a garage door opener or entry gate, make sure the area is clear. This will prevent potential harm or damage as the gate or garage door will activate during[...]

4. If, after 60 seconds, the indicator lamp does not flash rapidly, release both the transceiver and the hand-held transmitter buttons and repeat the procedure starting with Step 2 . Position the hand-held transmitter at a different angle and/or distance. 5. Press and hold the programmed garage door opener button and observe the indicator lamp. •[...]

ENTRY GATE PROGRAMMING The technology of some entry gates requires you to press and re-press (cycle) the hand-held transmitter button every 2 seconds during programming. Continue to press and hold the desired rear-view mirror button while you cycle your hand-held transmitter until the indicator lamp flashes rapidly. INFORMATION AND ASSISTANCE It is[...]

ELECTRIC WINDOWS 1. Window switches: • To open a window: Press lightly at the front of the switch and release. • To close a window: Pull up lightly at the front of the switch and release. • One touch open and close; Press or pull firmly at the front of the switch and release. Note: The windows will operate for 5 minutes after the engine is sw[...]

• To close the blind: Press lightly at the front of the switch and release. • One touch open and close; Press firmly at the front or rear of the switch and release. 4. Panoramic roof switch: Wherever possible, remove any snow, ice, dirt, and leaves etc. from the panoramic roof mechanism before closing. Failure to do so may damage the panoramic [...]

TOUCH SCREEN HOME MENU Always run the engine during prolonged use of the Touch screen. Failure to do so may discharge the vehicle battery, preventing the engine from starting Avoid spilling or splashing liquids onto the Touch screen. 1. Press to turn on/off the screen. When proximity cameras are fitted, this icon is changed and the button will turn[...]

TOUCH SCREEN USE Always run the engine during prolonged use of the Touch screen. Failure to do so may discharge the vehicle battery, preventing the engine from starting Avoid spilling or splashing liquids onto the Touch screen. TOUCH SCREEN CARE Do not use abrasive cleaners on the touch screen. For approved cleaning products, contact your Dealer/Au[...]

• Preferences : Select to alter the following settings: • Voice profile : The voice system can be trained to have a greater recognition of a particular voice or accent.The default setting is Standard . To build a voice profile for either User 1 or User 2 , it is necessary to complete a training program first. To complete the training for the fi[...]

CLIMATE CONTROL Press the CLIMATE hard key to access the climate control Touch screen menu. 1. Climate control settings menu. 2. Front heated/climate seat menu. Note: Heated/climate seats operate only when the engine is running 3. Rear climate menu (if fitted). 4. Climate control system on/off. 5. Synchronises all climate zones to the driver's[...]

12. Maximum defrost program. 13. Maximum air conditioning (cooling) program. 14. Heated windscreen. The heated windscreen will activate for a predetermined length of time. 15. Heated rear screen. The heated rear screen will activate for a predetermined length of time. Do not attach labels to the rear screen. Do not scrape or use abrasive materials [...]

Heated ventilation: • Touch the up arrow icon to switch heated ventilation on at maximum (3 red bars). • Touch the down arrow icon once or twice to reduce the ventilation setting (2 and 1 red bars). • Touch the down arrow a third time to switch off seat ventilation. Cooled ventilation: • Touch the down arrow icon to switch cooled ventilatio[...]

When the system is operating, the LED in the climate control AUTO or A/C button will flash. AUTO indicates the engine or cabin are being heated. A/C indicates the cabin is being ventilated. The choice of operation is automatically determined by the system depending on the external temperature. Note: The system will cease operation when the engine i[...]

Note: Avoid touching the antenna when operating the ON or OFF button. The remote control has an approximate range of 100 metres. There is no need to point the remote control at the vehicle. Press and hold the ON button for approximately 2 seconds. The LED will illuminate green to confirm that a remote climate program has been initiated. The LED fla[...]

REAR CLIMATE CONTROL There are 2 types of rear climate control: 3 Zone and 4 Zone. All of the 3 Zone controls will affect the whole of the rear passenger compartment. 4 Zone allows independent control of each side. To access the rear climate Touch screen menu, select Rear climate from the Front climate menu. Note: When DEFROST is selected at the fr[...]

4. Blower speed control. Rotate to adjust. 5. Temperature controls. Rotate to adjust between 16 ° C - 28 ° C (59 ° F - 83 ° F). The temperature is displayed on the Touch screen, Rear climate menu. 6. Heated/Climate seats temperature controls. Select the upper switch to increase and the lower switch to decrease. The 3 bar light display shows tem[...]

STORAGE COMPARTMENTS 82 Storage compartments L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

Make sure any items stored in the vehicle are secure and cannot move. If the vehicle is involved in an accident, or subject to sudden braking or direction change, loose items can cause serious injury. Do not drink, or use the cup holders when driving. 1. Front cup holders: Slide open the panel to access. Press and release to close. 2. Glovebox. 3. [...]

AUXILIARY POWER SOCKETS 1. Front power socket. 2. Front power socket. 3. Rear power socket. 4. Loadspace power socket. 84 Storage compartments L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

Only use Land Rover approved accessories. Using any other equipment may damage the vehicle's electrical system. If you are in any doubt contact a Dealer/ Authorised Repairer. The engine should be running when using accessories for long periods. Failure to do so can discharge the battery. Note: Power sockets can be used to power approved access[...]

LOADSPACE COVER Do not store the loadspace cover loose in the vehicle. During an accident or sudden manoeuvre, the load space cover could cause serious injury or death. Never place objects on top of the loadspace cover. During an accident or sudden manoeuver, loose objects can cause serious injury or death. 1. Pull the rigid portion of the cover to[...]

LUGGAGE ANCHOR POINTS All items carried in the luggage area should be properly secured. 1. To assist in safely securing large items of luggage, four lashing eyes are located in the rear loadspace floor. 2. If adjustable lashing eyes are fitted, first turn the locking button counter clockwise to unlock. Press the button and slide to the required pos[...]

1. Press then pull the retracting band until the required length is reached. Note: The retracting band should only be used along the side of the loadspace floor, as illustrated. 2. Adjust the divider to the required length. 3. Unlock the appropriate lashing eye and attach the retracting band/divider. 4. With the lashing eye in the unlocked position[...]

TOWING WEIGHTS See 261, WEIGHTS , for details of the Gross Vehicle Weight (GVW), Gross Train Weight (GTW), axle weights and maximum payload. Maximum permissible trailer and tow ball weights - kg (lb) 750 (1653) Unbraked trailer weight 150 (331) Tow ball nose weight for unbraked trailer 3500 (7716) Trailer weight with overrun brakes 250 (551) Tow ba[...]

Land Rover approved trailer electrical connectors will disable the automatic off-road height selections requested by the Terrain response. TOWING A TRAILER It is the driver's responsibility to make sure that the towing vehicle and trailer are being used correctly and in accordance with the manufacturer's recommendations and applicable leg[...]

• If the load can be divided between the vehicle and trailer, loading more weight into the vehicle will generally improve stability. Do not exceed the vehicle's weight limits. • For maximum stability make sure that loads are properly secured and unable to shift position during transit. Also, position loads so that most of the weight is pla[...]

During deployment of the powered tow bar, a series of long warning tones will sound and the green LED will flash. A double warning tone will sound to confirm full deployment and all LEDs will extinguish. To stow the powered tow bar, repeat the above procedure using the tow bar on/off button ( 1 ) and deploy/stow button ( 2 ). The powered tow bar mu[...]

FITTING THE MULTI-HEIGHT DROP PLATE TOW BALL The tow ball/draw bar is heavy, care must be taken when handling it. Never leave the tow bar loose in the vehicle. It could become a projectile in the event of heavy braking or an accident. 1. The drop plate tow bar is stored in a bag and should be strapped to an anchorage point in the rear stowage area.[...]

TOW BALL AND MOUNTING POINT DIMENSIONS (Multi-height drop plate) Imperial (in.) Metric (mm) Dimension 30 759 A 13.8 351 B 8.5 217 C 0.9 23 D 4.7 119 E 6.3 161 F 9.9 252 G 8.4 213 H 17.4 442 I 22 560 J 25 637 K 10.6 270 L 94 T owing L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

Imperial (in.) Metric (mm) Dimension 6.7 170 M 13.8 351 N 95 T owing R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

TOW BALL AND MOUNTING POINT DIMENSIONS (Powered tow bar) Imperial (in.) Metric (mm) Dimension 29 739 A 13 331 B 2.8 70 C 5 128 D 6.7 170 E 10.3 261 F 8.5 217 G 17.3 438 H 21.9 556 I 24.9 633 J 10.8 274 K 7.4 187 L 13 331 M 96 T owing L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

STARTING THE ENGINE Never start the engine, or leave it running, when the vehicle is in an enclosed space. Exhaust gasses are poisonous and can cause unconsciousness and death if inhaled. If the engine fails to start, do not continue cranking as this will discharge the battery. It may also damage the catalytic convertor due to unburnt fuel passing [...]

KEYLESS START BACKUP If the vehicle has been unlocked using the emergency key blade or the Smart key is not detected by the vehicle, it will be necessary to use the keyless start backup to disarm the alarm and start the engine. The keyless start backup can only be used when the message Smart Key Not Found - Position As Shown And Press Start Button [...]

IF THE ENGINE FAILS TO START Note: If the engine fails to crank when the engine START/STOP button is pressed and there has been a recent collision, the fuel system inertia switch may have been tripped. Seek qualified assistance. Make sure that the brake pedal is not depressed. Switch on the ignition (see 97, SWITCHING ON THE IGNITION ) and check th[...]

INTELLIGENT STOP/START The Intelligent stop/start system is designed to improve fuel efficiency and is automatically activated when the ignition is turned on. If the vehicle is stopped (e.g. at traffic lights or in traffic) the engine will turn off (unless it is required to support other vehicle systems). When the brake is released and a drive gear[...]

ECO-DATA CONTROLS The Eco-data system is designed to help the driver maximise fuel economy by providing vehicle data and driving tips. The Eco-data system can be accessed through the Extra features menu in the Touch screen. See 74, EXTRA FEATURES Eco-data can also be displayed in the instrument panel. See 47, TRIP COMPUTER When selected, Eco-data p[...]

AUTOMATIC TRANSMISSION Gear selector status is displayed in the Message centre. See 45, INSTRUMENT PANEL . Also the appropriate LED indicator, on top of the gear selector, will illuminate to confirm selection. Park (P) should only be engaged when the vehicle is stationary. If any other gear position is selected while the vehicle is stationary, the [...]

3. With the brake pedal still applied, press the release button to allow the gear selector to be moved: • 1 movement back to select Drive ( D ). • 1 movement forward to select Neutral ( N ). • 2 movements forward to select Reverse ( R ). Note: When the gear selector is released, after normal operation, it will return to the central position, [...]

While in D , temporary Manual mode will be held while the driver is accelerating, decelerating, cornering or continuing to request shifts via the paddles. If continued use of temporary Manual mode (via the shift paddles) is required, select S . Temporary Manual mode will be automatically deactivated if the engine is over-revved or laboured, to prev[...]

Note: If the Lo button is pressed before N is selected, the message SELECT NEUTRAL FOR RANGE CHANGE will be displayed in the message centre. Indication of the range change status will be displayed in the message centre. Once complete, select Drive ( D ). LIMP-HOME MODE Note: The driver should be aware that the vehicle’s performance will be reduce[...]

DYNAMIC STABILITY CONTROL (DSC) Dynamic Stability Control (DSC) is unable to compensate for driver misjudgement. It remains the driver's responsibility to drive with due care and attention, in a manner which is safe for the vehicle, its occupants and the other road users. This vehicle is not designed for cornering at the same speed as conventi[...]

Press and briefly hold the DSC OFF switch to re-enable DSC. Alternatively, select a new Terrain response special programme. Note: DSC is automatically disabled when the ignition is switched off. 107 Stability control R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

AIR SUSPENSION SYSTEM Make sure that the vehicle is clear of people and obstacles before lowering the suspension. The difference between Off-road height and Access height can be 115 mm (4.5 in). The air suspension system may be used to raise or lower the height of the vehicle, using the air suspension control switch. 1. Raise the suspension height.[...]

EXTENDED MODE If the vehicle body is raised (e.g. by jacking) or grounded in severe off-road conditions, the system may automatically enter Extended mode. Symbols in the raise/lower switch will flash and the message centre will display SUSPENSION IN EXTENDED MODE . The suspension can rise automatically to assist in clearing the obstacle. Once exten[...]

To raise the vehicle press and hold button ( 1 ) and button ( 2 ) together. To lower the vehicle press and hold button ( 1 ) and button ( 3 ) together. Note: If the starting height is above or below normal height, movement will cease when normal height is reached. Release the Smart key buttons and press again to continue. ADAPTIVE DYNAMICS If a fau[...]

IMPORTANT INFORMATION Do not rest your foot on the brake pedal while the vehicle is in motion. Never allow the vehicle to coast (freewheel) with the engine turned off. The engine must be running to provide full braking assistance. The brakes will still function with the engine off, but far more pressure will be required to operate them. If the red [...]

A fault with the EBD system is indicated by the brake warning lamp (see 49, BRAKE (RED) ) illuminating and an associated warning message. Gently and safely stop the vehicle and seek qualified assistance. ELECTRIC PARKING BRAKE (EPB) The parking brakes operate on the rear wheels. Therefore, secure parking of the vehicle is dependent on being on a ha[...]

Note: The red parking brake warning lamp will continue to be illuminated for at least ten seconds after the ignition has been turned off. 113 Brakes R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

USING THE PARKING AID 1. Parking aid button. 2. Parking aid sensor detection zones. Parking aid sensors will not detect moving objects such as children and animals, until they are dangerously close. Always use extreme caution when manoeuvring. Parking aid sensors may not detect some obstructions, for example narrow posts or small objects close to t[...]

When Reverse ( R ) gear is selected, both front and rear sensors will be active. When Drive ( D ) is selected, only the front sensors will be active. Note: If the system does not detect an object likely to come into contact with the vehicle, it will not display any tracking information in the Touch screen. When in Reverse ( R ) both the front and r[...]

Note: The rear camera display has priority over the Parking aids display. To cancel the camera display at any time, push the Home Menu button or touch the back soft key. Rear view camera display on the Touch screen will discontinue when either of the following apply: • Drive is selected for longer than 5 seconds. • Drive is selected and/or vehi[...]

REVERSE TRAFFIC DETECTION The Reverse Traffic Detection (RTD) system is a supplement to, not a replacement for, safe driving, good observation and use of the exterior and rear-view mirrors. Note: RTD is automatically disabled when a trailer is connected and when Park assist is active. In addition to the functionality provided by the rear view camer[...]

REVERSE TRAFFIC DETECTION SENSORS The RTD system will automatically disable if any of the sensors become partially or completely obscured. The amber warning indicator dot will illuminate in the exterior mirrors and the message Reverse Traffic Sensor Blocked appears in the message centre. Check that there is nothing obscuring the rear bumper and it [...]

PARK ASSIST Park assist is an aid to parallel parking in tight parking slots. For the system to operate correctly, your vehicle must be parallel to a line of parked vehicles along which you intend to search for a parking space. Your front wheels must be in the straight ahead position. Parking on a bend may cause the system to miscalculate distances[...]

120 Park assist L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

1. To activate, press the Park assist button while driving forwards at less than 18 km/h (11 mph). The Park assist button indicator will illuminate. Auto searching is active while the vehicle's speed is below 30 km/h (18 mph). When Park assist is activated, a previous space may already be located and can be displayed in the Message centre. To [...]

6. If further manoeuvering is required in the parking space, follow the instructions, Stop! Select D and await next instruction or Stop! Select R and await next instruction displayed in the Message centre. 7. When the parking manoeuvre is complete, STOP! Park Assist finished will be displayed. If a system fault is detected, a continuous tone will s[...]

• The vehicle may have been driven too close (within 41 cm [16 inches]) to the row of parked vehicles. • The vehicle may have been driven in reverse. Park assist will only search for a parking space when the vehicle is in Drive ( D ). • The approach angle may not be suitable. Park assist has not positioned the vehicle accurately within the sp[...]

ASL CONTROLS ASL allows a speed limit to be set that the driver does not wish to exceed. In certain conditions, such as a steep downhill gradient, the vehicle speed may exceed the set speed limit. This is because engine braking is unable to maintain or reduce the vehicle speed. 1. ASL on/off. The ASL button switches between cruise control and ASL. [...]

USING CRUISE CONTROL In certain conditions, such as a steep gradient, the vehicle speed may exceed the set cruising speed. This is because engine braking is unable to maintain or reduce the vehicle speed. Driver intervention may be required. Note: Cruise control is not available when using Hill Descent Control, or when the Sand, Mud or Rock Crawl T[...]

ADAPTIVE CRUISE CONTROL OVERVIEW The Adaptive Cruise Control (ACC) system is designed to maintain a gap from the vehicle ahead or a set road speed if there is no slower vehicle ahead. A speed may be set at between 32 km/h (20 mph) and 200 km/h (124 mph). The system acts by regulating the speed of the vehicle, using engine control and the brakes. AC[...]

Note: Follow mode is an integral function of ACC. You cannot disengage follow mode and still use cruise control to maintain your speed. Once a set speed has been selected, the driver can release the accelerator and the set road speed will be maintained. If a vehicle ahead enters the same lane or a slower vehicle is ahead in the same lane, your vehi[...]

The set speed and gap can be overridden by depressing the accelerator pedal while cruising at constant speed or in Follow mode. If the vehicle is in Follow mode when the ACC is overridden, the Follow mode warning lamp will go out and CRUISE OVERRIDE will be displayed in the message centre. When the accelerator is released the ACC function will oper[...]

Note: When resuming a set speed while in a curve, acceleration is reduced. A more severe curve will reduce acceleration further. Remember that ACC and Queue assist are primarily for use when minimal steering is required. HINTS ON DRIVING WITH ACC During some situations ACC may provide the driver with an indication that intervention is required. An [...]

3. There may be issues with the detection of vehicles in front when going into and coming out of a bend. 4. When moving around a stationary vehicle. This may cause uncertainty as to which vehicle should be followed. 5. When the vehicle ahead turns out of your lane. This may cause uncertainty as to which vehicle should be followed. In these situatio[...]

• Press the gap increase button to display the current setting in the message centre and then press again to increase the sensitivity of the alert. FWD ALERT <----> is displayed in the message centre. Note: The Forward alert set gap is retained when the ignition is switched off. ADVANCED EMERGENCY BRAKE ASSIST The system may not react to sl[...]

If an imminent risk of collision occurs, an audible warning is given. If a collision becomes unavoidable, IEB will apply the brakes at up to maximum pressure. After IEB has activated, IEB System Was Activated is displayed in the message centre and the system is inhibited from further operation until reset by a Dealer/Authorised Repairer. If the rad[...]

TERRAIN RESPONSE OPERATION Terrain Response selection is via a rotary control. There are 6 Terrain Response programs marked around the control. Automatic mode determines and applies the most appropriate program for the conditions. If the rotary selector is in the elevated position, depress the selector to engage automatic mode. Information relating[...]

If the sand to be crossed is damp/wet, and sufficiently deep to cause the wheels to sink into the surface, the Mud-Ruts program should be used. ROCK CRAWL This program should be used for terrain which is predominantly rocky, including for crossing river beds with submerged rocks. This program provides good low-speed control. Rock crawl can only be [...]

HDC CONTROLS Do not attempt a steep descent if HDC is inoperative or warning messages are displayed. 1. HDC on/off. HDC can be selected at speeds below 80 km/h (50 mph) but will only operate at speeds of less than 50 km/h (31 mph). HDC can be used in Drive ( D ), Reverse ( R ) and all CommandShift gears. When in Drive ( D ), the vehicle will select[...]

Note: HDC is automatically deselected if the ignition is switched off for more than 6 hours. 2. Increase the descent speed. Each gear has a predetermined maximum speed. Note: Vehicle speed will only increase on a slope steep enough to increase momentum. Use of the + switch may; therefore, not increase vehicle speed on a gentle slope. 3. Decrease th[...]

WADE SENSING CONTROLS Wade sensing should not be used during off-road driving, as rapid increases in water depth cannot be detected in time to deliver a warning message to the driver. The wade sensing system cannot detect the true level of water if a layer of ice or snow exists on the surface. Parking aid will not operate when wade sensing is activ[...]

Note: The Parking aid, Park assist and Intelligent stop/start systems are all disabled when wade sensing is operating. 138 W ade sensing L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

SURROUND CAMERA SYSTEM The camera home page is accessed from Extra features . See 72, TOUCH SCREEN HOME MENU . The camera hard key activates the Junction view if in non-reverse gears, or the reverse view if in reverse gear. 1. Enlarge: To enlarge a camera view, touch the image then touch the Enlarge soft key. Any 2 images can be selected and enlarg[...]

TRAILER GUIDANCE Note: Trailer guidance requires a connected trailer to be fitted with a tracking target sticker, which must be attached according to specific instructions. Ask your Dealer/Authorised Repairer for details. Note: This feature may not operate with all trailer designs. Trailer guidance aids trailer reversing, by displaying guidelines o[...]

AUDIO/VIDEO CONTROLS Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. 1. Press to switch the audio system on/off. Note: The audio system will operate with the ignition on or off, but will always switch off when the ignition is switched off. Switch the audio on again if required. 2. Rotate to adjust volume [...]

• To select the next track on chosen audio source - CD, MP3 etc. • when telephone is in use, press to scroll up lists of calls or phonebook entries. • To select the next TV channel on the channel list or the next DVD chapter. Long press: • To auto seek up the frequency to the next radio station. 9. Press to decrease volume for any source. 1[...]

The CD unit will play compact discs that conform to the international Red Book standard audio specification. Playback of CDs not conforming to this standard cannot be guaranteed. Recordable (CD-R) discs and re-writable (CD-RW) discs may not function correctly. Recordable (DVD-R or DVD+R) discs may not function correctly. Dual format, dual-sided dis[...]

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Div[...]

Japan only This product uses copyright protection technology, and Rovi corporation and other copyright holders are protected by the patent laws of the United States and other intellectual property rights. Use of this copyright protection technology requires authorization from Rovi corporation. Further, without special authorization from Rovi corpor[...]

GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FO[...]

RADIO CONTROLS 1. AM/FM : Waveband selection. Touch to view and select a waveband. The radio will tune to the last used station on that waveband. Touch again to close. The waveband selection box will close automatically after 5 seconds without use. 2. Displays information about the current station. 3. Seek down: • Short touch to auto seek down th[...]

8. Frequency input : Select to enter a known frequency of a station on the current waveband, using the numeric keypad that appears. Select OK or wait for 2 seconds to tune to the entered frequency. 9. Station presets : Each waveband has 6 preset positions. • Touch and release to tune to the station stored on that preset. • Touch and hold to sto[...]

DAB RADIO CONTROLS Note: Some types of body mounted accessories (for example, external luggage compartment stowage devices) may affect the performance of this system. 1. DAB 1/2/3 : Touch to view and select a DAB band ( DAB 1 , 2 or 3 ). The radio will tune to the last used channel on that band. Touch again to close. 2. Display showing the current [...]

• Sorting by Subchannel is only available when the current channel is broadcasting subchannels. • If Category is selected, touch the chosen category to view corresponding channels, before making your selection from the list. Once the desired selection has been made, select the Back soft key to return to the main DAB menu. 8. Subchannel : If sub[...]

If reception is lost when the vehicle is in motion, the vehicle may be out of range of the ensemble. To build a new list of ensembles, select Auto-tune . 151 DAB radio R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

PORTABLE MEDIA CONTROLS Do not adjust the main audio unit's controls, or allow the system to distract the driver while the vehicle is moving. Driver distraction can lead to accidents, causing serious injury or death. Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. See 141, AUDIO/VIDEO CONTROLS . My M[...]

• To return to the Controls menu, select the Back soft key. Note: If the iPhone is connected via a USB cable so that audio can be played or for phone charging, Bluetooth wireless technology devices audio is disconnected. 6. Upload : Applicable to Stored CD menu only. Select to view and manage the CDs loaded onto the CD store. • Select Upload al[...]

• Touch and hold to scan backwards through the current track. Playback will resume when the soft key is released. PORTABLE MEDIA CONNECTIONS Portable media devices can be connected to the media hub located in the cubby box. Rear seat passengers can connect at the rear of the centre console. Compatible portable devices include: • USB mass storag[...]

2. 3.5 mm AUX socket. 3. Rear media AV sockets. 4. Rear media USB/iPod socket. Do not plug non-audio devices into the USB port. Note: Use the cable supplied with your media device to connect to the USB socket. Note: A USB hub cannot be used to connect more than one USB device to the audio unit. Note: Devices connected to the USB ports will be charg[...]

If, after changing to the newly-docked device, you change back to the first device, play will resume at the point you left it (USB and iPod only). Note: You cannot use a USB hub to connect more than one USB device to the audio unit. Note: Devices connected to the iPod and USB ports will be charged, but devices that are fully discharged will not pla[...]

Note: If more than 5 devices are detected, it may be necessary to use the scroll bar to see the entire list. 8. When prompted, enter the PIN (Personal Identification Number) code into your device. See your device's operating instructions for more information. 9. Once your device is paired and connected to the system, a confirmation message wil[...]

TELEVISION CONTROLS 1. TV/My video. TV band/video input selection: • Touch Source to view and select either digital ( DTV 1 or DTV 2 - Digital ) or analogue ( TV - Analogue ) TV reception, CD/DVD, USB or iPod. When changing between analogue and digital bands, this will cause the last tuned channel on the new band to be displayed. When changing be[...]

Note: After a country format change, the channel list will be empty until the system has scanned all channels at least once. 7. TV channel presets: • Touch and hold to store the current channel as a preset. The channel name will then be displayed on the soft key. • Briefly touch to select the channel stored on that preset. Note: Stored presets [...]

VIDEO MEDIA PLAYER CONTROLS 1. Source : TV band/video input selection. Touch to view and select DVD or other forms of video media (CD/USB), provided the relevant media is present. The selected option will be displayed. Note: After 5 seconds without use, the TV/My video menu will close. 2. Preview screen for video media information: Touch to select [...]

For information on the CD/DVD loading slot and eject button, and the use of the audio/video controls on the audio unit and steering wheel, see 141, AUDIO/VIDEO CONTROLS . VIDEO MEDIA INHIBIT WITH VEHICLE MOVING When the vehicle is moving the video picture will automatically be inhibited. The Touch screen will display the TV/My video screen and the [...]

DUAL VIEW CONTROLS 1. Select to change the picture format (4:3, Zoom, 16:9). The next available format is displayed on the soft key. 2. Select to view a list of all available video sources. Touch the relevant soft key to select an alternative source. The controls menu for that source will then be displayed. 3. Touch to select a list of pre-set chan[...]

Note: If the driver has selected an alternative audio source (e.g. radio), this will be heard over the vehicle speakers. The passenger will need to listen to the dual view source using the wireless headphones. Press this button to activate dual view mode (located to the right side of the Touch screen). Once dual view is active, the passenger should[...]

REAR MEDIA CONTROL FROM THE TOUCH SCREEN Touch Rear media on the Audio/video home menu to select the Rear media control screen. 1. Information display. 2. Touch to select the left-side rear screen. 3. Touch to synchronise both screens. Then select the source to be synchronised. Note: Pressing the synchronise button will not synchronise a source alr[...]

8. Forward/Skip for the selected screen. 9. Play/Pause for the selected screen. 10. Rewind/Skip for the selected screen. 11. Source : Touch to select the rear media source screen. 12. Media source selection: Touch the required media button. Note: For DAB Radio select Radio. 13. Source - : Touch to select the required media and return to the Rear me[...]

3. Right screen select. 4. Video source select. 5. Navigation summary. Brazil only: 1/12 screen segment select. 6. Browse/TV channel list. 7. DVD menu. 8. Next track/file/channel/station. 9. Previous track/file/channel/station. 10. Play/Pause. 11. Repeat. Brazil only: Repeat and 'Red' selections. 12. Information. Brazil only: Information [...]

REAR MEDIA REMOTE CONTROL BATTERY Low battery power is indicated by the remote control power button flashing 3 times when pressed. To renew the batteries: • Remove the chrome battery cover. • Install 2 AAA batteries. Make sure the polarity of the batteries matches that shown inside the remote control battery compartment. Note: The remote contro[...]

USING VOICE CONTROL Note: The voice system has been designed to recognise a number of languages. However, Land Rover cannot guarantee the system will be compatible with every accent group within those languages. Please speak to your Dealer/Authorised Repairer about testing the Voice System for compatibility with a particular accent group. 1. Voice [...]

Note: If a listed item is longer than the available space on the menu, ...> will appear. Use the seek controls on the steering wheel to view the entire entry. See 141, AUDIO/VIDEO CONTROLS . VOICE TUTORIAL To listen to a tutorial detailing the operation of the Voice system: 1. Briefly press the Voice button to start a voice session. 2. Wait for [...]

• Restaurant/I’m hungry. • Shopping centre. • Hotel. • Motorway service. • Town centre. Note: The word Navigation must be followed immediately by a category. Icons will appear on the navigation display, indicating the locations of the selected POI. For further information about POIs, see 185, CATEGORIES AND SUB-CATEGORIES . 170 V oice c[...]

TELEPHONE SYSTEM OVERVIEW 1. Change phone. Search new or change to another paired phone. 2. Last 10. Access the last 10 dialled, received and missed calls. 3. Phonebook. Access the downloaded phonebook. 4. Digit Dialling. Access Digit Dialling mode. 5. Touch and hold to retrieve your Voice mail. 6. Status display: Displays the name and/or number di[...]

Before making use of the vehicle’s Bluetooth wireless technology phone system, your Bluetooth wireless technology device must be paired and connected to the vehicle system. This is done using 1 of 2 methods; via your phone to the vehicle or from the Touch screen to your phone. If 1 of these methods is not successful, try the other option. Each ti[...]

6. When the vehicle's Bluetooth ® wireless technology system is discovered, follow the on-screen instructions. Select Yes when prompted, to confirm the pairing. Either the phone or the vehicle system will ask for a PIN (Personal Identification Number). When prompted, enter a PIN of your choice and select OK to confirm. 7. Enter the same PIN i[...]

Disconnect. Use to end or reject a call. No phone connected. Phone signal strength indicator. Phone battery level indicator. Bluetooth. Indicates that a Bluetooth ® wireless technology device is connected. Tick. Indicates that a Bluetooth ® wireless technology device is paired. Voicemail. Press and hold to dial the stored voicemail number. Scroll[...]

PHONEBOOK Contacts stored in the memory of a paired phone can be automatically downloaded to the vehicle’s phonebook each time the phone is connected to the system. See 172, TELEPHONE COMPATIBILITY . Certain phones store the phonebook in two different areas, the SIM card and the phone memory. The vehicle system will access only those numbers stor[...]

THE NAVIGATION SYSTEM Navigation instruction is by map and turn information displayed on the Touch screen and can be complemented by voice guidance, if required. The system uses signals from Global Positioning System (GPS) satellites combined with information from vehicle sensors and from data stored on the hard drive, to establish the true positio[...]

After touching Continue , the Touch screen will display the previously displayed map view. This will show the current vehicle position. Touch the Nav menu soft key to display the Main menu screen. At this point, the first time user should set up personal preferences in the Nav set-up area. These settings are applied whenever navigation is used. 177[...]

MAIN MENU 1. More... : Displays page 2 of 2 Nav menu screen. 2. Cancel guidance : Cancels the current route guidance. 3. Destination entry : Provides a choice of options for entering a destination. 4. Previous destination : Displays previous destinations entered. 5. Display/Hide POI : Turns the POI (Point Of Interest) icons on the map on/off. 6. Wh[...]

11. Nav set-up : Settings for the Navigation system. 12. Route options : Allows selection of various options for the route. 13. TMC (Traffic Message Channel): Not used for entering a destination but, when enabled, will provide data about road conditions and any events that may affect the journey. 14. Stored locations : Manages the stored locations.[...]

MAP SPLIT SCREEN 1. Compass (always indicates north): Press to select: north up, heading up or bird's eye map style. 2. TMC (Traffic Message Channel) signal: Without a diagonal bar, a signal is being received; with a diagonal bar, a signal is not being received. The icon will also change colour depending on the status of traffic on the route. [...]

2. Touch the Auto zoom soft key. The soft key will be highlighted when auto zoom is enabled. Note: The highest level to which the map will zoom out, is the scale value set before the Auto Zoom feature is switched on. SCREEN MODES Touch the screen mode selection key to view a series of icons, each depicting a different screen mode (as detailed below[...]

6. Now enter the road name. Once sufficient letters have been entered, touch OK or List to display all the possible roads. 7. Select the road you require. Enter the house number of the address (if known) and then touch OK to confirm. 8. If the house number is not known, select OK ; the end of the road is then used as the destination. 9. The map scr[...]

When On is selected, if you make the same deviation from the proposed route 3 times, then the system will memorise the deviation and offer that as the normal route from then on. Select Reset all routes to delete any learnt routes and return to the default settings. VOICE GUIDANCE To turn Voice guidance on or off, but maintain Route guidance, procee[...]

6. Touch Ok from the favourite summary; home location is now set. POSTCODE Not all countries have this facility. 1. From the Nav menu select Destination entry . 2. Touch Postcode . Enter the postcode of your waypoint or destination from the keypad. The postcode must be entered precisely, including any spaces or punctuation. 3. When the postcode has[...]

POINTS OF INTEREST (POI) 1. From the Nav menu , touch Destination entry . 2. Touch More... . 3. Touch Point of interest . 4. Touch POI name and touch Ok to confirm. 5. Enter POI name, or select from List . 6. Alternatively, choose Category to see all categories of POI and make your selection. See 185, CATEGORIES AND SUB- CATEGORIES . 7. To narrow t[...]

2. Touch More... . 3. Touch Point of interest . 4. Touch POI near current and touch Ok to confirm. 5. Select a POI category, if required select again from a sub-category and touch Ok to confirm. 6. Touch Show List or Select Category to make further selections. Note: Up to 5 categories can be chosen to select a POI from. 7. Select your POI destinati[...]

RDS-TMC ICONS Any traffic event (broadcast on TMC) in your area, will be displayed as an arrow on the map. In case of lost reception, this data is stored in the system for up to 15 minutes. The colour of the TMC icon changes in order to show the type and priority of a TMC event. The background colour of the icon returns to normal when there is no l[...]

USING TMC Dynamic route guidance will attempt to calculate an alternative route to avoid a traffic event when the system receives an event warning. The system calculates a new route for all sections. However, if any waypoints are set, the system calculates for the next waypoint. If the event on route is serious (closed road) or if the new route is [...]

The original start point is now designated as the destination point and waypoints are numbered in countdown order. CCP to Destination (Current Car Position to Destination) Restores the original route to destination after CCP to Start is selected. Waypoint list Off-road navigation waypoints are shown in numerical order. The nearest waypoint is the l[...]

This is a licence agreement to use the Ordnance Survey (OS) Code-Point data incorporated in the Navigation system. By using this Code-Point data you accept and agree to all of the terms and conditions below. OWNERSHIP The OS Code-Point data is licensed by Ordnance Survey with permission of Her Majesty’s Stationery Office. © Crown Copyright. All [...]

The DATABASE reflects reality as existing before you received the DATABASE and it comprises data and information from government and other sources, which may contain errors and omissions. Accordingly, the DATABASE may contain inaccurate or incomplete information due to the passage of time, changing circumstances and due to the nature of the sources[...]

LIMITATION OF LIABILITY NAVTEQ Corporation does not warrant or make any representations regarding, either express or implied, regarding the use or results of the use of the DATABASE in terms of its correctness, accuracy, reliability, or otherwise and expressly disclaims any implied warranties of quality, performance, merchantability, fitness for a [...]

SAFETY PRECAUTIONS Do not smoke, use a naked flame, or cause sparks while refuelling. The resulting fire and explosion may cause serious injury or death. Avoid exposing the fuel gasses to any potential sources of ignition as the resulting fire and explosion may cause serious injuries and/or death. Switch off the engine when refuelling, as it is bot[...]

This vehicle is not suitable for use with fuels containing more than 25% ethanol. METHANOL Wherever possible avoid using fuel containing methanol. Use of fuels containing methanol may cause serious engine and fuel system damage. Vehicle performance problems resulting from the use of such fuels is not the responsibility of Jaguar Land Rover Limited [...]

In some countries diesel will contain higher levels of sulphur, which will require reduced service intervals to reduce the effects on engine components. If in doubt contact a local Land Rover Dealer/Authorised Repairer for advice. See 200, DIESEL PARTICULATE FILTER (DPF) . RUNNING OUT OF FUEL Avoid running out of fuel. Doing so can cause damage to [...]

Do not attempt to fill the tank to its maximum capacity. If the vehicle is to be parked on a slope, in direct sunlight, or high ambient temperature, expansion of the fuel could cause spillage. Do not operate the auxiliary heater when refuelling the vehicle. Doing so may cause fuel vapours to combust causing a fire/explosion. Check the fuel pump inf[...]

FUEL SPECIFICATION Diesel Petrol EN 590 91-98 RON Diesel vehicles in Algeria, Egypt, Libya, Morocco, India, Pakistan and Tunisia must only use premium diesel fuel. DIESEL MISFUELLING PROTECTION DEVICE The diesel misfuelling protection device may not activate if an unleaded petrol fuel nozzle is only partially inserted. When the misfuelling device i[...]

FUEL CONSUMPTION The fuel consumption figures shown below have been calculated using a standard testing procedure (the new EC test procedure from Directive 99/100/EC), and produced in accordance with The Passenger Car Fuel Consumption (Amendment) Order 1996. Under normal use, a vehicle’s actual fuel consumption figures may differ from those achie[...]

PARTS AND ACCESSORIES The fitting of non-approved parts and accessories, or the carrying out of non- approved alterations or conversions, may be dangerous and could affect the safety of the vehicle and occupants and also invalidate the terms and conditions of the vehicle warranty. Jaguar Land Rover Limited will not accept any liability for death, p[...]

• Brake fluid level. • Dynamic response fluid level. • Screen washer fluid level. • Tyre pressures and condition. • Operate air conditioning. Note: The engine oil level should be checked more frequently if the vehicle is driven for prolonged periods at high speeds. BRAKE PADS It is recommended that brake pads should be replaced when they [...]

DRIVING SHORT DISTANCES OR IN COLD WEATHER If the vehicle is frequently driven short distances or in cold weather conditions then the engine may not reach normal operating temperature. This means that regeneration of the diesel particle filter does not take place and the filter is not efficiently cleaned. When the filter reaches a condition when a [...]

Make sure sparks and naked lights are kept away from the engine compartment. Wear protective clothing, including, where practicable, gloves made from an impervious material. POISONOUS FLUIDS Fluids used in motor vehicles are poisonous and should not be consumed or brought into contact with open wounds. For your own safety, always read and obey all [...]

UNDER BONNET COVERS - REMOVAL 1. Release and remove the turnbuckle clips securing the cover. 2. Lift the front edge of the cover and slide forwards to remove. UNDER BONNET COVERS - REFITTING Before refitting the underbonnet covers, make sure no pipes, cables or other items, have been trapped between the cover and casing. 1. Place the cover over the[...]

2. Push the cover down firmly and fasten the 4 turnbuckle clips. UNBLOCKING WASHER JETS Do not operate the washer jets during unblocking or adjustment. Windscreen washer fluid may cause irritation to the eyes and skin. Always read and observe the washer fluid manufacturers instructions. If a washer jet becomes blocked, use a thin strand of wire to [...]

HEADLAMP REMOVAL 205 Maintenance R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

Set the air suspension to the Off-road height position, for increased access to the bumper fixings. See 108, OFF-ROAD HEIGHT . 1. Remove the under bonnet access cover next to the headlamp to be removed. See 203, UNDER BONNET COVERS - REMOVAL . 2. Remove the 4 securing clips from the grille. 3. Gently and evenly pull the grille forwards to release t[...]

1. Release the headlamp to gain access. See 205, HEADLAMP REMOVAL . 2. At the back of the headlamp unit, remove the cover. Turn it counter clockwise to release. 3. Pull off the electrical connector. 4. Release the bulb from the retaining tags and remove bulb. 5. Insert the new bulb and repeat the above procedure in reverse order. DIRECTION INDICATO[...]

1. With the tailgate open, remove the trim panel and then remove the 2 screws from the inner edge of the unit. 2. Firmly but carefully pull the unit away from the vehicle, releasing the 2 lugs situated at the rear of the lamp unit. 3. Disconnect the electrical connector and remove the unit from the vehicle. Place face down on a flat surface covered[...]

Access to a rear fog lamp housing is from above and behind the rear bumper. The bulb holder is a black plastic unit that incorporates the bulb. Set the air suspension to the Off-road height position, for increased access to the bumper fixings. See 108, OFF-ROAD HEIGHT . 1. Remove the rear lamp unit. See 207, REAR LAMP REMOVAL . 2. Remove the 5 fixi[...]

Note: Inside the bulb holder, there are three locating lugs. When fitting the new bulb unit, the lugs must line up with the connector correctly. Refitting is a reverse of the removal process. Make sure the connector lock is pressed down and that the bulb unit locates securely into the fog lamp housing. WIPERS SERVICE POSITION Before changing a fron[...]

Following cleaning of the vehicle exterior (particularly with a pressure washer), it is recommended that the vehicle is taken for a short drive to dry out the brakes. Substances which are corrosive, such as bird droppings, can damage the vehicle’s paintwork and should be removed as soon as possible. Use only cleaning products approved for use on [...]

CLEANING THE INTERIOR Some cleaning products contain substances that are harmful and can cause health problems if used incorrectly and may cause damage to the interior. CLEANING FABRIC UPHOLSTERY Do not polish the instrument panel. Polished surfaces are reflective, and may interfere with the drivers view. Clean plastic or cloth faced surfaces with [...]

Note: While cleaning the seat belt, take the opportunity to examine the webbing for damage/wear. Any wear or damage should be reported to, and rectified by, a Land Rover Dealer/Approved Repairer. AIRBAG MODULE COVERS Airbag covers should only be cleaned using a slightly dampened cloth, and a small amount of upholstery cleaner. Do not allow the airb[...]

FLUID FILLER LOCATIONS 1. Engine oil filler cap (diesel). 2. Engine oil filler cap (petrol). 3. Brake fluid reservoir cap. Note: The brake fluid reservoir cap is always located on the driver's side of the vehicle. 4. Windscreen washer fluid filler cap (all vehicles). 5. Windscreen washer fluid filler cap (cold climate vehicles only). 6. Dynami[...]

• The engine has been switched off for 10 minutes. The system will not give an accurate reading until the oil level has stabilised. The oil level can then be checked as follows: 1. Switch on the ignition (do not start the engine). See 97, SWITCHING ON THE IGNITION . 2. Make sure Park ( P ) is selected. 3. Select the Service Menu via the instrumen[...]

CHECKING THE COOLANT LEVEL Running the engine without coolant will cause serious engine damage. The coolant level in the expansion tank should be checked weekly (more frequently in high mileage or arduous operating conditions). Always check the level when the system is cold. The under bonnet cover must be removed to check the coolant level. See 203[...]

Antifreeze contains important corrosion inhibitors. The antifreeze content of the coolant must be maintained at 50% ± 5% all year round (not just in cold conditions). To make sure the anti-corrosion properties of the coolant are retained, the antifreeze content should be checked once a year and completely renewed every ten years, regardless of dis[...]

TOPPING UP THE BRAKE FLUID Brake fluid will damage painted surfaces. Soak up any spillage with an absorbent cloth immediately and wash the area with a mixture of car shampoo and water. Only use new fluid from an airtight container (fluid from opened containers or fluid previously bled from the system will have absorbed moisture, which will adversel[...]

CHECKING THE DYNAMIC RESPONSE FLUID LEVEL Dynamic response fluid is highly toxic. Keep containers sealed and out of reach of children. If accidental consumption of fluid is suspected, seek medical attention immediately. If the fluid comes into contact with the skin or eyes, rinse immediately with plenty of water. Do not start the engine if the flui[...]

BATTERY WARNING SYMBOLS Do not allow naked flames or other sources of ignition near the battery, as the battery may emit explosive gases. Make sure when working near or handling the battery, suitable eye protection is worn, to protect the eyes from acid splashes. To prevent risk of injury, do not allow children near the battery. Be aware that the b[...]

1. Connect 1 end of the positive (Red) jump lead to the positive terminal on the donor vehicle. 2. Connect the other end of the positive (Red) jump lead to the positive jump start terminal on the disabled vehicle. 3. Connect 1 end of the negative (Black) jump lead to the negative terminal on the donor vehicle. 4. Connect the other end of the negati[...]

2. Connect the negative (Black) cable to the negative jump start terminal of the disabled vehicle. 3. Connect/switch on the starting aid. 4. Start the engine and allow it to idle. 5. Disconnect/switch off the starting aid. 6. Disconnect the negative (Black) cable from the negative jump start terminal of the vehicle. 7. Disconnect the positive (Red)[...]

FUSE BOX LOCATIONS 223 Fuses R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

When a fuse box lid is removed, take care to protect the box from moisture, and refit the lid at the earliest opportunity. 1. To access the upper and lower luggage compartment fuse boxes, open the rear tailgate. See 9, OPENING AND CLOSING THE POWERED TAILGATE Remove the first access panel. Grasp the top of the panel and pull sharply. A label on the[...]

ENGINE COMPARTMENT FUSE BOX Circuits protected Fuse colour Rating (Amps) Fuse number Engine management system. White 25 1 Engine management system. Blue 15 2 Oxygen sensors. (petrol only). Yellow 20 3 Cooling Fans. (petrol only). Red 10 4 - - - 5 Engine management system. Active engine mount. (diesel only). Red 10 6 Engine management system. (diese[...]

Circuits protected Fuse colour Rating (Amps) Fuse number Horns. Blue 15 24 Rear seats. Green 30 25 - - - 26 - - - 27 Heated washer jet. Red 10 28 Road pricing. (Singapore vehicles only). Tan 5 29 Transmission. Terrain response. Blue 15 30 226 Fuses L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

PASSENGER COMPARTMENT FUSE BOX Circuits protected Fuse colour Rating (Amps) Fuse number Radio frequency receiver, Tyre pressure monitoring system (TPMS). Auxiliary heater. Front roof console. Tan 5 1 - - - 2 Front fog lamps. Blue 15 3 - - - 4 Tow bar module. Tan 5 5 Ignition relay. Tan 5 6 Sunroof. Sunblind. Yellow 20 7 Message Centre. Red 10 8 Ele[...]

Circuits protected Fuse colour Rating (Amps) Fuse number - - - 25 - - - 26 Trailer side lamps. Red 10 27 Sunroof. Sunblind. Yellow 20 28 - - - 29 - - - 30 Rain sensor. Ambient light sensor. Tan 5 31 Driver’s door. White 25 32 Dual climate seats. Yellow 20 33 Electric fuel flap actuator. Red 10 34 - - - 35 Battery back-up sounder. Tan 5 36 Keyless[...]

Circuits protected Fuse colour Rating (Amps) Fuse number Auxiliary power socket rear (right side). Blue 15 54 Auxiliary power socket rear (left hand). Yellow 20 55 Supplementary restraint systems (SRS). Red 10 56 Glove box lamp. Front roof console lamps. Windscreen misting sensor. Red 10 57 Passenger door. White 25 58 Powered tailgate open/close la[...]

LUGGAGE COMPARTMENT FUSE BOX FUSE BOX (upper) Circuits protected Fuse colour Rating (Amps) Fuse number - - - 1 Heated front seat. Climate front seat. White 25 2 Heated rear seat. Climate rear seat. White 25 3 Heated rear seat. Torch socket. Blue 15 4 Trailer. Blue 15 5 Fuel pump (V8 diesel only). Blue 15 6 Chassis control module. Tan 5 7 Front seat[...]

Circuits protected Fuse colour Rating (Amps) Fuse number Rear wiper. Yellow 20 26 Rear seat (left-side). Green 30 27 Rear seat (left-side). Green 30 28 Rear seat (right-side). Green 30 29 Rear seat (right-side). Green 30 30 231 Fuses R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

FUSE BOX (lower) Circuits protected Fuse colour Rating (Amps) Fuse number Touch screen. Front integrated control panel. Blue 15 1 Audio amplifier. Red 10 2 - - - 3 Digital radio. Navigation. Television tuner. Red 10 4 Audio head unit. Blue 15 5 Audio video input/output panel. Blue 15 6 - - - 7 - - - 8 - - - 9 - - - 10 - - - 11 - - - 12 - - - 13 - -[...]

TYRE MARKINGS 1. P indicates that the tyre is for passenger vehicle use. This index is not always shown. 2. The width of the tyre from sidewall edge to sidewall edge in millimeters. 3. The aspect ratio, also known as the profile, gives the sidewall height as a percentage of the tread width. So, if the tread width is 205 mm and the aspect ratio is 5[...]

9. M+S or M/S indicates that the tyre has been designed with some capability for mud and snow. 10. The number of plies in both the tread area, and the sidewall area, indicates how many layers of rubber coated material make up the structure of the tyre. Information is also provided on the type of materials used. 11. Wear rate indicator. A tyre rated[...]

All of the vehicle's tyres (including the spare) should be checked regularly for damage, wear and distortion. If you are in any doubt about the condition of a tyre, have it checked immediately by a tyre repair centre or a Land Rover Dealer/Authorised Repairer. TYRE PRESSURES All tyre pressures, including the spare, should be checked regularly [...]

A slight pressure loss occurs naturally with time. If this exceeds 14 kPa / 1.4bar / 2 psi per week, have the cause investigated and rectified by qualified personnel. If it is necessary to check tyre pressures when the tyres are warm, you should expect the pressures to have increased by up to 30 - 40 kPa / 0.3 - 0.4 bar/ 4 - 6 psi. Do not reduce th[...]

For the correct tyre specification and pressures see 235, TYRE PRESSURES AVOIDING FLAT SPOTS In areas of extended high ambient temperature, vehicle tyres can be affected by a softening of the tyre sidewall. If the vehicle is stationary for long periods, the effect is to slightly deform the tyre at the point where the tyre meets the standing surface[...]

When the original wheels and tyres are refitted, the vehicle will need to travel a short distance to reset the TPMS and extinguish the telltale. For more information on winter tires, contact your Dealer/Authorised Repairer. USING SNOW CHAINS Only use traction devices in heavy snow conditions, on compacted snow. Never exceed 50 km/h (30 mph) when tr[...]

TYRE PRESSURE MONITORING SYSTEM TPMS provides a low pressure warning and does not re-inflate your tyres. Tyre pressures should be checked regularly using an accurate pressure gauge when the tyres are cold. TPMS can NOT register damage to a tyre. Regularly check the condition of your tyres, especially if the vehicle is driven off-road When inflating[...]

VEHICLE LOADING When the vehicle is delivered, tyre pressures will be set to those displayed on the tyre pressures label. See 235, TYRE PRESSURES . These pressures are suitable for loading the vehicle up to GVW (Gross Vehicle Weight). The TPMS will be set to monitor these tyre pressures. It is possible to select a TPMS light load level that corresp[...]

TYRE REPAIR KIT If you are in any doubt regarding your ability to carry out the instructions, contact your Dealer/Authorised Repairer before attempting the repair. Your vehicle may not be equipped with a spare tyre. If this is the case, in its place in the rear underfloor storage compartment, you will find a tyre repair kit. The tyre repair kit can[...]

Watch the tyre sidewall during inflation. If any cracks, bumps or similar damage, or deformities appear, switch off the compressor and deflate the tyre. Do not continue to use the tyre. USING THE TYRE REPAIR KIT Avoid skin contact with the sealant which contains natural rubber latex. If the tyre inflation pressure does not reach 1.8 bar (26 psi, 18[...]

5. Remove the valve cap from the damaged tyre. 6. Remove the protective cap from the inflation hose. Connect the inflation hose to the tyre valve making sure the hose is screwed on firmly. 7. Making sure the compressor switch is in the Off ( 0 ) position, insert the power cable connector into an auxiliary power socket, see 82, STORAGE COMPARTMENTS [...]

5. If the pressure of the sealant filled tyre is above 1.3 bar (19 psi, 130 kPa) adjust the pressure to the correct value. 6. Make sure the compressor switch is in the Off ( O ) position and insert the power cable connector into the auxiliary power socket. If the vehicle is in a well ventilated area, start the engine. 7. Switch the compressor to On[...]

WHEEL CHANGING SAFETY Before raising the vehicle or changing a wheel, make sure you read and comply with the following warnings. Always find a safe place to stop, off the highway and away from traffic. Make sure the vehicle and jack are both on firm level ground. Do not jack the vehicle if it is over a metal grating or manhole cover. Apply the park[...]

Always secure the spare wheel, or the removed wheel, in the correct position using the retaining bolt. Do not stow the wheel while the vehicle is raised on the jack. After wheel changing, always secure tools, chocks, jack and replaced wheel in their correct stowage positions. Such objects, if not properly stowed, can become flying missiles in a cra[...]

Always chock the wheels using suitable wheel chocks. Place the chocks on both sides of the wheel diagonally opposite the wheel to be changed. If jacking the vehicle on a slope is unavoidable, place the chocks on the downhill side of both wheels on the axle not being raised. Wheel chocks are stowed in the tool kit. 1. Remove the chocks from the tool[...]

Make sure the jack is on firm, level ground. Never place anything between the jack and the ground, or the jack and the vehicle. Position the jack from the side of the vehicle, in line with the appropriate jacking point. Do not attempt to raise the vehicle, unless the jack head is fully engaged in the jacking point. Only jack the vehicle using the a[...]

1. Before raising the vehicle, use the wheel nut brace to slacken the wheel nuts of the wheel to be replaced by half a turn counter-clockwise. 2. Position the jack under the relevant jacking point, of the vehicle. Note: Do not allow the jack to contact the sill at any other point, as damage may result. 3. Turn the jack lever clockwise to raise unti[...]

Note: If it is not possible to torque the wheel nuts when a wheel is replaced, they should be set to the correct torque as soon as possible. If an alloy spare wheel is to be fitted, using a suitable blunt tool, knock the centre cap out of the removed wheel. Using hand pressure only, press the centre cap into the newly fitted spare. Check and adjust[...]

TOWING EYES The towing eyes at the front and rear of the vehicle are designed for on-road recovery only. If they are used for any other purpose, it may result in vehicle damage and serious injury. Remove the front and rear towing eye covers before driving off-road, to prevent damage or loss. The front and rear towing points are located behind remov[...]

1. To release the rear cover, rotate each of the fasteners 90 degrees counter clockwise with a coin (or similar), to release the lower edge. 2. Rotate the cover to release the hooks at the top. Remove the cover. 3. For vehicles fitted with a Powered tow bar, a towing eye is included in the tool kit, located in the underfloor area of the loadspace. [...]

OFF-ROAD RECOVERY If the towing eyes are to be used for off-road recovery, it is essential that off-road driver training covering recovery techniques is undertaken. Further information regarding off-road driver training can be found at http://www.landroverexperience.com TRANSPORTING THE VEHICLE The recommended method for recovery/transporting the v[...]

Do not tow the vehicle for more than 50 km (30 miles). Do not exceed 50 km/h (30 mph). Towing for a greater distance or at a higher speed may result in serious damage to the transmission. Do not tow the vehicle if the transmission cannot be set in Neutral ( N ), or if the rear electronic differential has failed in the locked position. The following[...]

BEFORE STARTING OR DRIVING If the vehicle is involved in a collision it should be checked by a Dealer/ Authorised Repairer, or suitably qualified persons, before starting or driving. EVENT DATA RECORDING Event data recorders are capable of collecting and storing data during a crash or near-crash event. The recorded information may assist in the inv[...]

LABEL LOCATIONS Warning labels attached to your vehicle bearing this symbol mean: Do not touch or adjust components until you have read the relevant instructions in the handbook. Labels showing this symbol indicate that the ignition system utilises very high voltages. Do not touch any ignition components while the starter switch is turned on. 1. Bo[...]

ENGINE SPECIFICATIONS V8 Petrol S/C V6 Petrol S/C V6 Diesel 4 999 cm ³ 2 995 cm ³ 2 993 cm ³ Capacity 1-5-4-2- 6-3-7-8 1-4-2- 5-3-6 1-4-2- 5-3-6 Firing order 92.5 mm 84.5 mm 84.0 mm Bore 93.0 mm 89 mm 90.0 mm Stroke 8 6 6 Number of cylinders 9.5:1 10.5:1 16:1 Compression ratio 257 T echnical specifications R XML to PDF by RenderX XEP XSL-FO F or[...]

LUBRICANTS AND FLUIDS Specification Variant Part SAE 5W-30 engine oil meeting specification WSS-M2C934-B. If unavailable 5W-30 engine oils to ACEA C2 specification may be used. V6 Diesel vehicles with DPF Engine oil SAE 5W-30 engine oil meeting specification WSS-M2C913- C or B. If unavailable 5W-30 engine oils to ACEA A5/B5 specification may be use[...]

Specification Variant Part Shell DOT4 ESL. If unavailable, a low viscosity, synthetic compatible DOT4 brake fluid that meets ISO 4925 class 6 and Jaguar Land Rover LRES22BF03 requirements may be used. All vehicles Brake fluid Screen wash with frost protection All vehicles Screen washer 1:1 mixture of Havoline XLC antifreeze and water. All vehicles [...]

CAPACITIES Capacity litres (pints) Variant Item 85 (18.7 gallons) V6 Diesel Fuel tank (usable) 105 (23 gallons) V6 Petrol 105 (23 gallons) V8 Petrol 6.0 (10.5) V6 Diesel Engine oil refill and filter change 8.0 (14.0) V6 Petrol 8.0 (14.0) V8 Petrol Filled for life All vehicles Automatic gearbox 0.75 (1.32) Without low range transmission Transfer box[...]

WEIGHTS Gross Train Weight (GTW) ² kg (lb) Gross Vehicle Weight (GVW) ¹ kg (lb) Vehicle weight from kg (lb) Variant 6500 (14330) 3000 (6614) 2115 (4663) V6 Diesel vehicles 6450 (14220) 2950 (6504) 2144 (4727) V6 Petrol vehicles 6550 (14440) 3050 (6724) 2310 (5093) V8 Petrol vehicles 1 The maximum permissible weight of the vehicle including passen[...]

DIMENSIONS Degrees mm (inches) Description Item - 2220 (87.4) Width (including mirrors) A - 1780 (70) Height (standard road height): B 25.8 ° - Approach angle (at EEC kerb weight and standard road height) C 160.6 ° - Ramp breakover angle (at EEC kerb weight and standard road height) D - 2923 (115) Wheelbase E - 4850 (191) Overall length F - 1690 [...]

WHEEL AND TYRE SIZES Light load tyre pressures Up to 4 passengers at 68 kg each plus 15 kg of luggage each (150 lb plus 33 lb) Rear pressures bar (psi, kPa) Front pressures bar (psi, kPa) Tyre size Wheel size 4.2 (60, 420) 4.2 (60, 420) T195/70 R20 M (temporary use spare 6J x 20 2.5 (36, 250) 2.3 (33, 230) 235/65 R19 109 V 7.5J x 19 2.5 (36, 250) 2[...]

WHEEL ALIGNMENT DATA All models 0.15 ° ± 0.2 ° Wheel alignment - front 0.3 ° ± 0.2 ° Wheel alignment - rear -0.76 ° ± 0.75 ° Camber - front left -0.76 ° ± 0.75 ° Camber - front right -1.5 ° ± 0.75 ° Camber - rear left -1.5 ° ± 0.75 ° Camber - rear right 3.92 ° ± 0.75 ° Castor - front left 3.92 ° ± 0.75 ° Castor - front right[...]

REMOTE KEY FOB TRANSMITTER LOCATIONS 1. Security transmitter. 2. Cabin front transmitters. 3. Door transmitters. 4. Cabin middle transmitter. 5. Loadspace interior transmitter. 6. Loadspace interior transmitter. 7. Radio frequency transmitter. 8. Loadspace exterior transmitter. Any person fitted with an implanted medical device should make sure the[...]

[...]

Specific Conditions Antenna Position Max. Output Frequency Band Service Transmitter, harness and antenna installation to the requirements of ISO/TS 21609. Anywhere close to a glazed area that does not contain antennas or conductive glass. 2 W eirp 5795 - 5815 MHz Road Telematics Transmitter, harness and antenna installation to the requirements of I[...]

DECLARATIONS OF CONFORMITY 268 T ype appr oval L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

269 T ype appr oval R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

270 T ype appr oval L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

271 T ype appr oval R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

272 T ype appr oval L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

273 T ype appr oval R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

274 T ype appr oval L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

275 T ype appr oval R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

276 T ype appr oval L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

277 T ype appr oval R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

278 T ype appr oval L XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

279 T ype appr oval R XML to PDF by RenderX XEP XSL-FO F ormatter, visit us at http://www.renderx.com/[...]

A About this handbook ...................................... 2 Access height (air suspension) .................. 109 Accessories ................................................ 199 Access to rear seats ..................................... 21 Adaptive dynamics ..................................... 110 Adaptive front lighting system ...............[...]

B Battery boost starting ......................................... 221 changing timed climate remote .......................... 222 charging ................................................. 222 connecting jump leads ........................... 220 monitoring system ................................. 222 using a starting aid ........................[...]

positioning ............................................... 35 recommended child seats ........................ 35 tether straps ............................................. 38 Child safety tether straps ............................. 38 Child seats ................................................... 33 Cleaning after off-road driving .............[...]

programming a single button ................... 68 programming the garage door opener ..... 67 rolling code device programming ............. 68 Double locking ............................................. 13 full alarm .................................................. 13 Drive away locking ......................................... 8 Driving activa[...]

global opening ............................................ 8 keyless entry .............................................. 8 unlocking mode .......................................... 7 unlocking the steering column ................. 28 Entertainment portable media controls ......................... 152 Ethanol ......................................[...]

extra-urban cycle .................................... 198 urban cycle ............................................. 198 Fuel gauge .................................................... 45 Full screen view for video ........................... 161 Fuses changing ................................................ 224 engine compartment fuse box .......[...]

Infotainment automatic station retune ......................... 148 CD loading .............................................. 142 DAB radio ............................................... 149 settings ............................................... 150 stations ............................................... 150 dual view ..........................[...]

interior lamps locations ............................ 56 stealth mode ............................................ 57 Limp home mode ....................................... 105 Load carrying luggage divider ......................................... 87 Load securing .............................................. 87 Loadspace cover ..................[...]

N Navigation Arabic language ...................................... 186 automatic route learning ........................ 182 avoid points ............................................ 182 destination entry .................................... 181 search area ......................................... 181 destination entry by postcode ...............[...]

Pairing via the phone .......................................... 172 Park assist limitations of use .................................... 122 troubleshooting ...................................... 122 Parking hands free parking ................................. 119 park assist limitations ............................ 122 park assist troubleshooting [...]

DAB controls .............................................. 149 settings ............................................... 150 DAB controls .......................................... 149 DAB stations .......................................... 150 Radio data system auto retune ............................................. 148 Rain sensor .............[...]

seat belt pre-tensioners ............................ 31 seat belt reminder warning ....................... 31 seatbelts ................................................. 212 seat belts .................................................. 30 seatbelts warning lamp ............................ 50 sitting correctly .....................................[...]

electric head restraints ............................. 25 folding armrest ......................................... 19 head restraint removal ............................. 25 head restraints ......................................... 25 rear control of front passenger seat ......... 20 rear seat access ....................................... 21 rear[...]

Sunroof reset ....................................................... 210 Supplementary restraint system airbag covers .......................................... 213 airbag deployment .................................... 42 airbag locations ........................................ 40 airbags maintenance .............................. 199 airbag war[...]

front climate control ................................. 75 fuel burning heater ................................... 77 heated and cooled seats ........................... 76 home menu .............................................. 72 inhibited display ..................................... 161 language selection .................................... 7[...]

Tyre pressure monitoring system .............. 239 full size replacements ............................. 240 valves ..................................................... 236 Tyre pressure monitoring system (TPMS) tyre care ................................................. 234 Tyre repair kit repair procedure ..................................... 242[...]

Voice control .............................................. 168 navigation POI categories ....................... 169 recognising your voice ........................... 169 training the system ................................. 169 tutorial .................................................... 169 voicetags ..........................................[...]

pressures ............................................... 235 puncture repair ....................................... 241 puncture repair safety ............................ 241 repair kit ................................................. 241 repair kit use .......................................... 242 repair procedure ............................[...]

DRIVER CONTROLS 1. Front interior lamps ( 56 ). 2. Panoramic roof ( 70 ). 3. Roof blind ( 70 ). 4. Lighting/direction indicator/trip computer ( 53 / 47 ). 5. Message centre control ( 46 ). 6. Instrument panel, warning lamps and message centre ( 45 / 49 ). 7. Cruise control/adaptive cruise control ( 125 / 126 ). 8. Wiper/washer controls ( 58 ). 9. E[...]