LevelOne FPS-3001TXU Bedienungsanleitung

L L e e v v e e l l O O n n e e P P r r i i n n t t S S e e r r v v e e r r s s FPS-3001TXU FPS-3002USB FPS-2112 U U s s e e r r G G u u i i d d e e Copyright © 2004. A LL R IGHTS R ESERVED . Docume nt Versi on: 1.2 (Apri l , 20 04 ) P/N: 9560M F00A0 All trademark and trade names are the properties of their respective owners.[...]

Table of Contents Chapter 1 Introduction ...........................................................................................1 Features ................................................................................................................... 1 Safety Inst ructions ....................................................................[...]

Appendix A Specifications ....................................................................................62 FPS-3001TXU ....................................................................................................... 62 FPS-3002USB ....................................................................................................... 64[...]

1 Chapter 1 Introduction This chapter provides details of your LevelOne Pr inter Server's features and components. Congratulations on the purch ase of your new LevelOne Printer Server. This device was designed to prov ide a simple and efficien t network printing solution. Features  Versatility. The LevelOne Printe r Server supp orts up to f[...]

Level One Printer Servers Safety Instructions For your own s afety, and t o protect your Le velOne Pri nter Server, please observe the following safety advice. 1. Unplug this device from its powe r source be fore cleaning. Use only a sli ghtly dampened cloth for cleani ng. Do no t use liquid or aerosol cl eaners. 1. Avoid usin g this product near w[...]

Introduction Models This section c ontains detai ls of all Level One Printer Server m odels covere d by this m anual. Please take a few minutes to familiarize yourse lf with your new Leve lOn e Printer Server. FPS-3001TXU (100BaseT Direct Attach) 1 3 4 5 2 Figure 1: FPS-3001T XU Item Description 1 Male Parallel Port, for direct connection to the pr[...]

Level One Printer Servers FPS-3002USB Figure 2: FPS-3002USB Item Description 1 ERR LED 2 ACT LED 3 USB Connector 4 Diagnostic button, see page 5 for details. 5 10/100BaseT C on necto r. 6 5V Power Port LED Indicators The FPS-3002USB LevelOne Printer Server is fitted with 2 LED indicators. The red LED is the Status/Error indicator. The green LED is [...]

Introduction FPS-2112 Figure 3: FPS-211 2 Item Description 1 ERR LED 2 ACT LED 3 LAN LED 4 12V Power Port 5 Parallel Port Connector 6 USB Connector 7 10/100BaseT C on necto r LED Indicators The FPS-2112 LevelOne Print er Server has 3 LED indicator s on the top. T he Error LED i s red. The ACT LED is green. The LED indicator modes a re described in [...]

Level One Printer Servers Diagnostic Push Button(for FPS-3001TXU and FPS-3002USB) FPS-3001TXU and FPS-3002USB are fitted with a "D iagnostic Push Button". This button is used to restore the factory defau lt settings, or to print a test page. The test page will contain all the cu rrent settings, and will be ou tput to the printer attached [...]

2 Chapter 2 L AN Installation This chapter describes how to insta ll the LevelOne Printer Server in your Local Area Network. Procedure 1. Find the Default LevelOne Printer Server Name • The Default Server Name is shown on a sticker o n the base of t he device. It consists of 8 letters a nd/or digi ts. • Record this name, it may be needed during[...]

3 Chapter 3 Configuration This chapter provides an overview of the configuration process. Overview The LevelOne Pri nter Serve r is designe d to supp ort many di fferent pl atforms, and t he configuratio n required would depe nd upon t he enviro nment in w hich it is installed. • The LevelOne Printer Server usually requires configuration, bu t if[...]

Figure 4: LevelOne Printer Serv er Screen 3. Clic k Next on the first screen of the Wizard, to view a list of LevelOne Printer Servers on your LAN. 4. Select your new LevelOne Printer Server, then click Next to continue. 5. Enter the required data on the following screen. • Name of the LevelOne P rinter Serve r can be cha nged if y ou wish. • C[...]

4 Chapter 4 Client PC Configuration The chapter details the client configuration required on LAN clients to use the printer or printers attached to the LevelOne Printer Serv er. Overview Before perfor ming client co nfiguration, t he LevelOne Pri nter Server m ust be installe d on your LAN, and con figured as descri bed in Chapte r 3. Both t he Lev[...]

Client Setup Checking your Network Pr otocols (Window s 9x) Your PC must have EITHER the TCP/IP or NetBEUI pr otocols install ed. (All ve rsions of Windows afte r Windows 95 have TCP/ IP install ed by defau lt.) • If using the Peer-to-peer Printing , the installation program will check this for you. • If usi ng other m ethods, you must check m [...]

Level One Printer Servers Windows Peer-to-peer Printing With this pri nting met hod, print jobs a re stored (q ueued) on y our PC, and t hen sent to the LevelOne Printer Server when it is available. Figure 6: Peer-to-Peer Printing Windows 200 0 & XP requir e no additional so ftware. For other versions of Window s, the supplied PTP (Peer-to- Pee[...]

Client Setup 3. Choose Stan dard TCP/IP Port , then click New Por t . Figure 8: Add Port Screen 4. On the Add Standard TCP/IP Printer Port screen above, ent er the IP Address of the LevelOne Printer Server in the Printer Name or IP Add ress field, then click Next . Figure 9: Additional P ort Information Screen 5. On this screen, select Custom , and[...]

Level One Printer Servers Figure 10: Port Settings Scree n 6. On the Port Set t i ngs sc reen, shown above: • Select LPR in the Protocol section • Enter a Queue name (L1 for Port 1, L2 for Port 2 if the LevelOne Printer Server has 2 printer port s) • Ensure the LPR Byte Counting Enabled setting is Enabled . • Click OK to confirm your change[...]

Client Setup Windows 9x/ME Setup Before perfor ming the fol lowing proce dure, the Level One Printer Se rver must be i nstalled on your LAN, and conf igured as described in Chapte r 3. Both the LevelOne Prin ter Server and the attached printer should be powere d ON. 1. Insert th e supplied CD-ROM into your driv e. If the setup program does not star[...]

Level One Printer Servers Figure 12: Print Port Setu p (Peer-to-peer Printing) If your LevelOne Printer Server is not listed: • Click the "Refresh" button. • Check that both the LevelOne Printer Server and th e pr inter are properly connected, and powered on. • Check that the LevelOne Printer Server has been configured. (Use the Set[...]

Client Setup Figure 13: Configure Printer Port 4. Select the correct Windows printer in the Existing Printers list, and click the Connect button. If the correct printer type is not listed, c lick "Add New Printer" to run the Windows Add Printer wizard. Step through the Wizard and install the required printer: • Select the correct Printe[...]

Level One Printer Servers • Locate the Delete Port button. This button is on the Details or Ports tab, depen ding on your vers ion or Windows. • If the LevelOne Printer Server's IP Address is changed, and you can no long er pr int, delete the port (see procedur e ab ove) and re-install it. Advanced Port Options The options for the Peer-to-[...]

Client Setup Windows SMB Printing This method re quires no additional soft ware to be installed, but t he NetBEUI or TCP/IP protocol m ust be install ed on your PC. U se the follo wing proced ure to inst all the LevelOne Printer Server's printer as a Windows SM B network printer: 1. Double-click the Network Neighb orhood icon on the desktop . [...]

Level One Printer Servers Printing from MS-DOS Programs Windows can r edirect print data from a parallel port on your PC (e.g. LPT1 ) to a networ k printer. This redirection is called "Capture Prin ter Port", and is useful for MS-DOS pr og ram s. The MS-DOS progr am is configured to use LPT1 (parallel p ort 1 on the PC), but Windows "[...]

Client Setup Capture Settings - Windows 2000/XP 1. Login as Adm inistrator. 2. Open the c ommand pr ompt wi ndow. 3. Enter the following command to cap ture data from LPT1 (parallel port 1) net use lpt1 server_nameprinter_name /persistent:yes Where server_name printer_name is replaced with the actua l path to your printer. e.g. net use lpt1 [...]

Level One Printer Servers Windows with Server-based Print Queues With a Server-based Print Queue, the LevelOne Printer Server is installed on an existing Network Server (Windows, Unix , or NetWare) , rather th an on your PC. I f your Network Administrator uses t his system, each Window s client m ust be set up as follows: 1. Open y our Printers fol[...]

Client Setup Macintosh (AppleTalk) The LevelOne Pri nter Server supports Ap pleTalk (EtherTalk) , PAP, ATP, NBP, ZIP and DDP protocols, e nabling M acintosh com puters on t he network to view and use t he LevelOne Printer Server as a regular AppleTalk printer. Normally, no configuration is required. Software Requirements System 9.x OS or newer. App[...]

Level One Printer Servers Macintosh OS X If using LPR printing, you need to ensure t he LevelOne Pri nter Server has a val id IP addr ess before configuring you r Mac as follows. LPR printing Setup 1. Select the Printer List icon. Figure 21: Printer List 2. Click the Add Printer button. 3. Choose LPR Printers Using IP. Figure 22: LPR Screen 4. Ente[...]

5 Chapter 5 BiAdmin Management Utility This chapter describes the installa tion and operation of the BiAdmin Configuration & Management program . Requirements This program requires: • Windows 95, Window s 98 or ME • Windows NT 4.0 , Windows 2000 o r XP Additional Recommendations : • Screen resolution of 800 * 600 or greater. Installation [...]

Level One Printer Servers Device List The left panel displays a list of all LevelOne Printer Servers found on the network. When a LevelOne Printer Server is selected from the list, its details are displayed in the right panel. Note : If the IP address is "Nul l", please click the Refresh icon to get the value again. If the desired LevelOn[...]

BiAdmin Select the desir ed port from the drop-d own list to display the cu rrent status of the printer attached to the po rt. Possible states are: • Status - On-line, Off-line, or Out of Paper • Printing Infor mation - Idle, Printing If the printer is Bi-directional, and is not busy, the Conf igura tion button will be available, allowing you t[...]

Level One Printer Servers Menus Main Menu Device Status Same as Device Icon. Printer Stat us Same as Printer St atus Icon . Configure Same as Configure Icon. Upgrade Same as Upgr ade Icon. Refresh Same as Refresh Icon. Exit Same as Exit Icon. InitDevice Menu Reset Device This will cause the d evice to reboot. This should be done after making any c [...]

BiAdmin System Tab This screen allows you to: • Change t he name of t he LevelOne Printer Serve r. • Change t he "Password" for t he LevelOne Pri nter Server. • Set the Net work Prot ocols use d the selected Level One Printe r Server. ( Any protocol s not used on yo ur LAN m ay be disa bled. This m ay impro ve perform ance.) Figure [...]

Level One Printer Servers TCP/IP Tab Selecting this tab will allow configu r ation for the TCP/IP network protocol. The basic options are: • Dynamic IP Address (DHCP) - The IP address is obtained automatically, from a DHCP Server on your network. • Fixed IP Address - Y ou must ente r the IP address , Subnet M ask, and Gateway Address. • IP Ad[...]

BiAdmin AppleTalk Tab Generally, no LevelOne Print er Server c onfiguratio n is required i n order t o use AppleTal k. This screen allows you to: • Set the Zone Nam e field to determine which Apple system s can gain acces s to this printer. • The Printer Type field is used to describe the printer driver used for each port. • Set Commu nicatio[...]

Level One Printer Servers NetBEUI Tab This screen allows you to: • Choose the Domai n name for the selected LevelOne Printer Server. • Set how fast jobs are sent to the printer by using the Response Time field. • Set the desired opt i o n f or the Abort Job if Er ror Occured setting. • YES causes a print job to be termin ated if a printing [...]

BiAdmin Internet Printing Tab The Internet Printing feature allows you to send print jobs to th e LevelOne Printer Server using Internet E-m ail. Please see Internet Mail Printing Configuration in Chapter 7 - Special Feat ures for details of using this feature. Figure 28: Internet Printing Screen - 33 -[...]

Level One Printer Servers Port Tab This screen ha s 2 panels - Physical Port and Logical Port . Physical Port The following settings are available: • Selected Physical Port - Select the Physical Printer Port you wish to configure. • Handsh ake Sign al - Select Busy Only or Busy & Ack for the Physical Port. • Printer Type - Select High Spe[...]

BiAdmin NetWare Tab For the FPS- 3001TXU Level One Print er Serv er, t he NetWare Tab is also available. See Appendix D - NetWare for detail s of us i ng Net Ware. - 35 -[...]

6 Chapter 6 W eb-Based Management This chapter explains how to use y our Web Browser to configure the LevelOne Printer Server Overview The LevelOne Printer Server inco rporates a HTTP server. This allows you to connect to the LevelOne Print er Server and con figure it usin g your Web B rowser. M ost browsers s hould wo rk, provided they suppo rt ta[...]

Web based Management Connecting to the LevelOne Printer Server 1. Start your Web Browser. 2. In the Addre ss box, enter HTT P:// followed by the IP Address of the LevelOne Printer Server. e.g. http://192.168.0.21 3. You will then be prompted for the password. If no password has b een set, just press E NTER . 4. Use the m enu bar on t he top of the [...]

Level One Printer Servers NetBEUI Figure 31: NetBEUI Screen Domain Name Enter the designated work gr oup to be serviced by the Leve l One Printer Server. This field is not case sensitive, so names with different case will be considered to be the same name. Response Time Set how fast jobs are sent to the printer. The default value of zero (0) delay [...]

Web based Management TCP/IP Figure 32: TCP/IP Screen IP Address IP Address ass igned to t his device. If using dynam ic IP Addresses (DHCP, BO OTP, rarp), t his shoul d be left at 0.0.0. 0. Subnet Mask (Network Mas k) If the Router (Gateway) A ddress is 0.0. 0.0, the S ubnet Mask sh ould also be left at 0.0.0.0. I f you have a router, ente r the Su[...]

Level One Printer Servers NetWare If your model supports the NetWare network prot ocol, the NetWare screen will be av ailable. Figure 33: NetWare Screen General NetWare Mo de Select Netprint Print Server or Remote Printer , as appropriate. The default is Netprin t Prin t Server . Frame Type Select the frame types used by your network. (Ethernet 8 0[...]

Web based Management Master File Server (Bindery Mode only) Name of the Netprint Print Server's master file server. NetWare Passw ord The password on the NetWare Serv er. The Netprint Print Server device needs this pass word to connect to the NetWare server. Job Notification The options are: • Job notification at only the work station where [...]

Level One Printer Servers Community This is a text field. Enter the name of the community. Access Select the desired level of access. Trap Receivers Receiver No. Select the Trap Receiver nu mber (1..4), a nd click the Get Data butto n to update the display for the selected item. IP Address Enter the IP Address of the Trap Receiver, which will be se[...]

Web based Management • Connected Pri nter - the model name of the printer conn ected to the port, if the printer name is known. (If the printer is not bi-dir ectional, this information is un available.) • Status - the current status of the printer (On-line, Off-line, Out of paper) • Printing Infor mation - this will show either Idle or Printi[...]

7 Chapter 7 Special F eatures This chapter covers the special featu res of the LevelOne Printer Server. Overview The LevelOne Printer Serve r has 2 special features: • IPP (Int ernet Printi ng Protoco l). • Proprietary Internet Mail Printing system. Internet Printing Protocol (IPP) IPP (Internet Printing P rotocol) is a st andards-ba sed system[...]

Special Features IPP Client Setup - Windows 98/ME For these platforms, IPP Client software is supplied on the CD-ROM. Also you can distribute t he setup pr ogram (IPP_C LIENT.EXE) to users vi al E-mail . Installing from the CD-ROM 1. Insert the CD-ROM in your drive. If th e program does no t start auto matically, run the SETUP program in the top-le[...]

Level One Printer Servers Figure 37: Select Printer for IPP Port 6. Either select an existing prin ter to use the new port, and click OK. OR Click the Add New Prin ter button to create a new printer to use the IPP port. This will start the Add Printer wizard . Follow the prompts to complete the process. Ensu re that the new printer uses t h e IPP p[...]

Special Features IPP Client Setup - Windows 2000/XP Windows 2000 and XP have their own IPP Client, and there is no ne ed to install the supplied IPP Client Software . To use the Windo ws IPP C lient with the LevelOne Printer Server, follow this procedure: 1. Start the Add Prin te r wizard. 2. Select Network Printer , and click "Next" to s[...]

Level One Printer Servers 5. Click "OK", and then select the printer manufacturer and model to match the printer connected to the port on the IPP Server. 6. Click "Next", and co mplete the Wizard. The IPP printer is now ready for use. Using IPP Printers The IPP Printer can be selected a nd used like an y other Windows printer. I[...]

Special Features Internet Mail Printing The Internet Mail Printing System allows user s to print data to your printer acro ss the Internet. Users send the Internet Leve lOne Printer Server an E - Mail, with the print job norm ally sent as an attachment to the E - Mail. The LevelOne Prin ter Server will retrieve the E - Mail and print it. System Req[...]

Level One Printer Servers Internet Mail Printing Configuration The LevelOne Printer Server must be configu r ed with the data in the following table. The supplied BiA dmin utility program, or the Web interface (on 100 BaseT models) can be used to set the following entries on the TCP/IP screen. Mail Server IP Address The IP Address of the E - Mail S[...]

Special Features User Software The software provide d for rem ote users (Inte rNet Printing Port) shoul d be installed by everyone intending to use Internet printing. Othe rwise, remote users can print correctly only if: • They send an E - Mail directly to the LevelOn e Printe r Server Mail Account, using their normal E - Mail application. • Th[...]

Level One Printer Servers Mail Server Name or IP Address This is the name or IP Address of your Mail Server . If you are on a L AN, ask the L AN Admini strator. If usin g a dial-up conn ection, use t he data provi ded by your ISP. Your Internet E-mail Address The normal addres s that people use to send you E-m ail. Retry Interv al (Seconds) If unab[...]

Special Features 1. Connect your default printer to the InterNet Printing Port. 2. Check that "Reply Notificatio n Mail" in the InterNet Printing Port is ON. 3. From Note pad or anot her text edi tor, print a short m essage (e.g. "T his is a test print") to the Internet Printer. You will receive a re ply E - Mail containing the [...]

8 Chapter 8 T roubleshooting This chapter describes some problem situations, which may arise, and the solutions to them. Overview If you encounter printing difficulties, pleas e refer to the appropriate section. If, after following the advice in these do cuments , the LevelOne Printer Server still does not function pr operly, please c ontact your d[...]

Troubleshooting AppleTalk (Macintosh) Problem No. 1 Why do I get an inc orrect printout? Solution No. 1 Some possible reasons are: • You m ay have chosen B inary encodin g to print t he file. Try to use ASCII en coding. • Some of the fonts, which are in your print file may not be supported by the pri nt er. Try sel ect i ng Laser Wri t e r 7 in[...]

Level One Printer Servers • Install the Apple LaserWriter 7 driver. You ar e having trouble printing with the Apple LaserWriter 8 driver. Problem No. 8 Why do I have tr ouble printing with the LaserWriter 8? Solution No. 8 Your applicatio n software may not be compatible with th e LaserWriter 8 driver or your system may not meet the requirements [...]

Troubleshooting Windows Printing Problem No. 1 When I tried to install the Printing softw are for Peer-to-Peer printing, I received an err or message and the installation was aborted. . Solution No. 1 This may be caused by an existing installation of the printer port software. Before attempting another installation: • Remove the existing installa[...]

Level One Printer Servers 7. Click the Add Po rt button. On the resu lting screen, select Other , then Printer Server , as the port to add, as shown below. 8. Click OK to see the Print Port Con figu ration screen, as shown below. - 58 -[...]

Troubleshooting 9. Click the Browse Device button, select the desired LevelOne Printer Server, and click OK. 10. Click OK to return to the Printe rs folders, and right-click on th e Printer. Ensure that the Work off-lin e option is NOT checked. The Printer shoul d no longer be gray e d out, and is ready fo r use. Problem No. 3 I connected and confi[...]

Level One Printer Servers Problem No. 5 When printing from some softwa re applications such as Power Point, it takes a long time and the print out is incorrect. Solution No. 5 The problem is due to the printer, which is being conf igured to Start printing after the first page is spooled . T o change this set ting: • Go to Control Panel - Printers[...]

Troubleshooting Unix Troubleshooting Problem No. 1 LevelOne Printer Server de vice is not recognized. Solution No. 1 Check the following: • The netw ork cable is OK. • There are no routers between t he LevelOne Printer Serv er and the UNIX host duri ng IP addre ss assignment. • There are no NetWare File S e rvers without TCP/IP support betwee[...]

Appendix A Specifications FPS-3001TXU FPS-3001TXU Power Cons umption 4w max. External Power Ada pter 9V DC LEDs 4 Parallel Port 1 Male DB-36 Ethernet conne ctor 10/100Base -T FCC Statement This equipm ent generates, uses, and can radiate radi o frequency ene rgy. It has been teste d and found to comply with the limits fo r a Class B dig ital d evic[...]

Specification s Parallel Port Pin Assignments Pin Signal Name Source 1 -Strobe H 2 +Data 1 Bi-Di* 3 +Data 2 Bi-Di* 4 +Data 3 Bi-Di* 5 +Data 4 Bi-Di* 6 +Data 5 Bi-Di* 7 +Data 6 Bi-Di* 8 +Data 7 Bi-Di* 9 +Data 8 Bi-Di* 10 - ACK P 11 + Busy P 12 + Paper Erro r P 13 + Select P 14 - Auto Feed H 15 Not Defined 16 Logic GND 17 Chassis GND 18 Peripheral Lo[...]

Level One Printer Servers FPS-3002USB FPS-3002USB Power Cons umption 5.5w m ax. External Power Ada pter 9V DC LEDs 2 USB Port (1 .1) 1 Ethernet 10/100B aseT FCC / CE FCC, CE. Class B FCC Statement This equipm ent generates, uses, and can radiate radi o frequency ene rgy. It has been teste d and found to comply with the limits fo r a Class B dig ita[...]

Specification s FPS-2112 FPS-2112 Power Cons umption 5.5w m ax. External Power Adapter 12V DC LEDs 3 USB Port (1 .1) 1 Parallel Port 1 Centroni c femal e DB-25 connect or Ethernet 10/100B aseT FCC / CE FCC, CE. Class B FCC Statement This equipm ent generates, uses, and can radiate radi o frequency ene rgy. It has been teste d and found to comply wi[...]

Level One Printer Servers Feature Table Specifications FPS- 3001TXU FPS- 3002USB FPS-2112 IPX/SPX  TCP/IP    PTP over TCP/IP    PTP over NetBEUI    Apple EtherTa lk    Protocols SMB over NetBEUI    Win95/98/ 2000/ME/ XP/NT    MAC    UNIX    Network Environment NetWare NDS &a[...]

B Appendix B W indows Ser ver Configuration Windows NT4.0 Server If using Windo ws NT 4. 0, Microsoft TCP/IP Printing Support must be installed. • If it is already installed, add a TCP/IP Remote Printer, as describe d below. • Otherwise, install TCP/IP printing support, then add a TCP/IP Remote Printer. Adding TCP/IP Printing Support 1. Go to S[...]

Level One Printer Servers Windows 2000/2003 Server 1. Start the Add Prin te r Wizard, select Network Printer , then click Next to browse fo r the LevelOne Printer Serve r . 2. Locate and doubl e-click the LevelOne Print e r Server, select the desired port, and click Next . A message like the following will be displayed: Figure 43: Windows 2000 Mess[...]

C Appendix C Unix Systems Overview Your Wireless LevelO ne Print er Server supp or ts t he LPD Unix printing method , which is supported by all com mon Unix sy stems. You must conf igure both t he Wireless Le velOne P rinter Serve r itself and your Uni x system , as described in t he following sections. LevelOne Printer Server IP Address Configurat[...]

Level One Printer Servers LPD Printing LPD is a built-in printing protocol for most UNIX systems. Configuratio n for the m ost common platform s is described below. LPD on IBM AIX 4.15 Before proceeding, en sure that the LevelOne Printer Serve r has been assigned an IP Address. To setup your AIX system for LPD printing, perform the following steps.[...]

Unix LPD on System V Before begi nning LPD Set up, ensure that an IP A ddress has been assi gned to the LevelOne Printer Server. Keep th e following points in mind : The remote host name is the name of the LevelOne Printer Server. The remote printer name is t he print que ue name for t he Logi cal Printer. Logical printers also need to be configure[...]

Level One Printer Servers Where: Printer_name is the Print Queue name used to store jobs for the corresp ond ing logical printer. PS_NAME is the LevelOne Printer Server name defined in /etc/hosts. Logical_Printer_name is the logical pr inter name on the LevelOne Printer Server. (e.g. L1) Spooler_directory is t he directory you created in Step 6. Ex[...]

Unix LPD on BSD Before conti nuing, ensu re that an IP A ddress ha s been assigned to the LevelOne Printer Server. Remember the following: The remote host name is the name of the LevelOne Printer Server. The remote printer name is the logical printer (e.g. L1) on the LevelOne Printer Server. If asked fo r the LPD type, enter the service t ype as BS[...]

Level One Printer Servers Example: Marketing|RP1_PS123456: [T AB ] :lp=: [T AB ] :rm=PS_Rm203: [T AB ] :rp=L1: [T AB ] :sd=/usr/spool/Marketing: [T AB ] :mx#0: Repeat this process for each Logi cal Printer/Print Queu e combination that you wish to create. Printing using LPD For LPD printing instructions, refer to your UNIX manual. The followin[...]

D Appendix D NetW are NetWare 5 • The LevelOne Printer Server must be con f igured as a valid device on your TCP/I P network. This pri nting met hod uses LPR ov er TCP/I P, not the NetWare prot ocol. • To use NDPS (Novell Distributed Printing Services), the Novell server m ust be running No vell NetWare 5, and the PCs (clients) m ust be runni n[...]

Level One Printer Servers To start the NDPS Manager in future, enter the following comman d at the console: LOAD NDPSM then select the NDPS Manager object. To star t the NDPS Man ager whenev er you brin g up the s erver, add a command like the following to your se rver's AUTOEXEC.NCF file: LOAD NDPSM SerMGR.TeSupp The last item is the name of [...]

NetWare Figure 47 Configure Port Handler 10. In the Host address IP field, enter the IP Address pre viously assigne d to the Le velOne Printer Server device. 11. In the Printer Name field, enter the Lo gical Port nam e on the LevelO ne Printer Ser ver. (L1 for Port 1, L2 for port 2) . 12. Cli ck Finish , then select appropriate drivers fo r Windows[...]

Level One Printer Servers NetWare 3 and 4 The FPS-3001T XU LevelOne Printer Ser ver supports t he NetWare net work prot ocol, allowing you to use the NetWare "Print Server" an d " Remote Pr inter" modes. Configuratio n must be per formed using BiAdmi n. In BiAdmin, select the NetWare tab to view a screen like the example below. [...]

NetWare NetWare Print Server Mode Figure 49: Print Server Screen Device Name Change the na me if you wish. NDS Tree Name Select the File Server's NDS tree nam e (root name) Print Server NDS Context Path to the NDS Context. This does not include the Context itself, and each OU should be separated by a period. e.g. department.company . Polling Q[...]

Level One Printer Servers Using BiAdmin with Client 32 With NetWare Client 32 installed on your PC, BiAdmin’s NetWare capabilities are enhanced. As well as con figuring the LevelO ne Printer Server, you can configure the NetW are Ser ver o r Serv ers. Preparation 1. Ensure that you are logg ed into the NetW are server( s) you wish to use. You n e[...]

NetWare Print Server Mode - Bindery If Bindery Print Server Mode is selected, the following screen will appear: Figure 52: Bindery Print Server Mo de Data Print Server Name Change the name of t he selected LevelO ne Printer Se rver if you wish. (This fi eld is also on the Conf iguratio n-System m enu.) Master File Server Nam e of the LevelOne Print[...]

Level One Printer Servers Quickset Button (Bindery) The Quickset button on the previous screen will conf igu re the NetWare server u sing default values derive d from the default nam e, as shown on the followin g example. Figure 53: Bindery Quickset This screen displays the nam e the selected LevelOne Printer Server, and the following information f[...]

NetWare • The right colum n lists any available servers. Note th at to be available, you must be logged into the Server with Su pervisor rights. • Use the “<<” and “>>” buttons to move file servers to and from the Serviced Fileserver list on the left. • When completed, click Next . This will create a NetWare Print Server o[...]

Level One Printer Servers "Printer" Button 1. After selecting the Printer button on the screen above, the Net Ware print er objects ( 1 for each port on the LevelOne Printer Server) will be created if they do not yet exist. 2. The next scree n (shown belo w) allows yo u to select the de sired port o n the LevelOne Printer Server. This als[...]

NetWare Assigning Printer Queues (Required) This screen will be displayed when a port button is clicked on the previous screen. Use this screen to assign queue(s) to the prin ter object ass ociated with the selected port. Figure 57: Assign Qu eu es (Bindery) This screen displays the name of the Ne tWare Printer on the top of t he screen. Queues ser[...]

Level One Printer Servers To Assign Users to Queues (Required) Select the queue, then click Users on the screen above to se e the following screen. The current queue name is shown on the top of the screen. Figure 58: Assign Users to Qu eu e (Bin dery) • Assign a user or gr oup by sele cting them on the right, and clicking the “<<” butto[...]

NetWare Password Clicking t he Password button on the screen shown in Figure 55: Configure NetWare Server (Bindery PS m ode), allows y ou to sim ultaneously cha nge the Net Ware password for the Master File Server , and t he NetWare logi n password stored i n the LevelOne P rinter Serv er. (The LevelO ne Printer Se rver must be able to login to the[...]

Level One Printer Servers Print Server Mode - NDS If Print Server - NDS Mode was chosen, the following screen will appear. Figure 61: NDS Print Server Mode Data Print Server Name Change the na me of the selec ted LevelOne Pri nter Server i f you wish. (This fi eld is also on the Conf iguratio n-System m enu.) NDS Tree Name Select the File Server&ap[...]

NetWare Quickset Button (NDS) The Quickset button on the screen above will config ure the NetWare server with default values based o n the defaul t name of t he LevelOne Pri n ter Server. You will see a screen like the following example. Figure 62: NDS Quickset Change the default valu es if you wish, then click Setup to create these objects on the [...]

Level One Printer Servers • Password - Change t he login pass word used by the LevelO ne Printer Se rver when it connects to the NetWare server. By de fault, there is no password . See Password (NDS) for details. Printer button 1. After selecting Printer above, the NetWare printer ob jects (1 for each port on the LevelOne Printer Server) will be [...]

NetWare • Stop servicing a queue by selecting it from the list on the left, and click ing the “>>” button. • When a Queue on the left is selected, the Users, Operators, and Information buttons become available. To Assign Users to Queues (Required) Select on queue on the screen above, then click Users to see the following screen. Figur[...]

Level One Printer Servers The curr ent Queue an d Context ar e di splayed at th e top of the screen. • Use the Change Context button to change the current context. Th e Availabl e Operators list on the right will then change to show the queue s av ailable in that context. • Assign a n operator by sel ecting them on the right, a nd clicki ng the[...]