Lexmark 35S3389 Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 269 Seiten
- 8.28 mb
Zur Seite of 269
Ähnliche Gebrauchsanleitungen
-
Printer
Lexmark 13C0086
317 Seiten 6 mb -
Printer
Lexmark 26C0002
171 Seiten 5.2 mb -
Printer
Lexmark dt1
171 Seiten 5.2 mb -
Printer
Lexmark X 4630
149 Seiten 1.15 mb -
Printer
Lexmark MS826
231 Seiten 16.21 mb -
Printer
Lexmark 4433
74 Seiten 1.03 mb -
Printer
Lexmark g02
317 Seiten 6 mb -
Printer
Lexmark dn2
171 Seiten 5.2 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Lexmark 35S3389 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Lexmark 35S3389, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Lexmark 35S3389 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Lexmark 35S3389. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung Lexmark 35S3389 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Lexmark 35S3389
- Den Namen des Produzenten und das Produktionsjahr des Geräts Lexmark 35S3389
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Lexmark 35S3389
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Lexmark 35S3389 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Lexmark 35S3389 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Lexmark finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Lexmark 35S3389 zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Lexmark 35S3389, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Lexmark 35S3389 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
MX310dn User's Guide May 2013 www.le xmark.c om Machine type(s): 7015 Model(s): 270[...]
-
Seite 2
Conten ts Safe ty infor matio n.... ...... ..... ........ ...... ........ ..... ...... ........ ..... ...... ....... ...... ...... .6 Learn ing a bout t he pr inte r..... ........... ........ ........ ........... ........ ........ ........... .....8 Findi ng in formati on abo ut the p rint er..... ......... ...... ....... ...... .......... ...... .[...]
-
Seite 3
Prin ting co nfid entia l and o ther he ld jo bs.. ........ .... ...... ....... ..... ..... ..... ....... ..... ..... ..... ....... ..... ...... .... ..... .....53 Prin ting i nformati on p ages.... .... ....... ..... ..... .... ....... ..... .... ....... ..... ..... ....... ..... .... ..... ....... .... ..... .. ....... ..... .....55 Cancel ing a [...]
-
Seite 4
Settin gs me nu. ....... .... .... ..... ...... ..... .... .... ....... .... ..... .... ...... ..... .... ..... ...... .... ..... .... ...... ..... .... .... .... ..... ...... ...1 17 Help menu.. ..... ..... ........ ..... ..... ..... ........ ..... ..... ..... ........ ..... ..... ...... ....... ..... ..... ...... ....... ..... . .......... ..... [...]
-
Seite 5
[x] ‑ page j am, op en tra y [x]. [2 4y.xx ]...... ............ ........ ......... ............ ......... ........... ......... ........ .......... .......1 80 [x] ‑ page j am, cl ear m anual f eeder . [ 25y.x x]..... ..... ..... ....... ...... .... ........ ..... ..... ..... ....... ..... ..... ..... ........ ... ..181 [x] ‑ page j am, op en[...]
-
Seite 6
Safety information Connect t he power co rd to a pr operly gro unded elec trical o utlet th at is near the prod uct and ea sily acces sible. Do not p lace or use this product near wate r or we t locati ons. CAUTION —SHOCK HA ZARD: Do not use the fax feature during a lig htning s torm. Do not set up this prod uct or make any ele ctrical o r cablin[...]
-
Seite 7
CAUTION —SHOCK HA ZARD: If you are acce ssing the c ontroller bo ard or instal ling optio nal hardware or memo ry devices somet ime after setting up the pr inter, th en turn t he pri nter off , and unplu g the powe r cord from th e electric al outl et befo re conti nuing. If you have an y other devi ces att ached to the print er, then turn them o[...]
-
Seite 8
Learni ng about the prin ter Finding informa tion about the printer What are you looking for? Find it here Initia l setup in structions: • Connecting the printer • Installin g the p rinter sof tware Setup documentation—The setu p documentation came with the printer and is al so available at http://support.le xmark.com . Additional setup and i[...]
-
Seite 9
What are you looking for? Find it here The latest supplemental information, upda tes, and customer support: • Docu mentati on • Driver d ownload s • Live chat support • E ‑ mail support • Voice support Lexmark support Web site— http://support.le xmark.com Note: Select your country or regi on, and then select your product to view the a[...]
-
Seite 10
1 2 3 4 5 1 1 Right s ide 30 cm (1 2 in.) 2 Front 51 cm (20 in.) 3 Left side 20 cm (8 in.) 4 Rear 20 cm (8 in.) 5 Top 54 cm (21 in.) Printer configurations CAUTION—TIPPI NG HAZARD: Fl oor-mount ed config urations require addit ional furni ture for st ability. You m ust use eith er a printe r stand o r printer base if yo u are using m ultiple in p[...]
-
Seite 11
1 2 3 4 8 9 10 7 6 5 1 Printer control panel 2 Automatic document f eeder (ADF) 3 ADF tr ay 4 ADF bi n 5 Front door release button 6 Standard 2 50 ‑ sheet tray 7 Optio nal 2 50 ‑ or 550 ‑ sheet tray 8 50 ‑ sheet multipurpose f eeder 9 Paper s top 10 Standard b in Understanding th e basic fun ctions of the scan ner • Make q uick copies or [...]
-
Seite 12
Using the ADF and scanner glass Automatic d ocument feed er (ADF) Scanner glass Use the ADF for m ulti ple ‑ page documents. Note: The ADF scans only one side of the page. Use the scanner g lass for single ‑ page documents, book pages, sma ll items (such as postcards or photos), transparenci es, photo paper, or thin media (such as magazine cl i[...]
-
Seite 13
Using the printer control panel 1 2 3 4 5 6 7 8 9 11 12 13 10 Use the To 1 Display • View the printer status and me ssages. • Set up and operate the printer. 2 Arrow buttons Scroll up and down or l eft and right. 3 Select butto n • Select menu options. • Save settings. 4 Address book button View all the stored addresses. 5 Redial button Vie[...]
-
Seite 14
Indicator light Printer st atus Off The print er is off or in Hibernate mo de. Blinking green The printer is warming up, proc essing data, or printi ng. Solid gree n The print er is on, but idle. Blinking red The print er requires user inte rvention. Sleep button light Printer status Off The printer is off, idle or in Ready state. Solid amber Th e [...]
-
Seite 15
Additional printer setup Installing internal options CAUTION —SHOCK HA ZARD: If you are acce ssing the c ontroller bo ard or instal ling optio nal hardware or memo ry devices somet ime after setting up the pr inter, th en turn t he pri nter off , and unplu g the powe r cord from th e electirca l outlet b efore co ntinui ng. If you ha ve any ot he[...]
-
Seite 16
2 Open th e controller board shield usi ng the green handl e. 1 2 3 Use the followi ng illustra tion to locate the option card connect or. Warning—Pote ntial Da mage: Controller b oard electronic co mponents ar e easily damaged by static elect ricity. Touch so methin g metal o n the prin ter befo re touc hing any c ontrolle r board ele ctron ic c[...]
-
Seite 17
Installing an op tional card CAUTION —SHOCK HA ZARD: If you are acce ssing the c ontroller bo ard or instal ling optio nal hardware or memo ry devices somet ime after setting up the pr inter, th en turn t he pri nter off , and unplu g the powe r cord from the electr ical ou tlet befo re conti nuing . If you have o ther de vices at tached to the p[...]
-
Seite 18
4 Push the c ard firmly into place as shown in the ill ustration . Warning—Pote ntial Da mage: Imprope r inst allation of the card m ay cause damag e to th e card a nd the contr oll er boar d. Note: The entire l ength o f the co nnector on the card must to uch and be flushe d agains t the con troller board. 5 Close th e controller board sh ield, [...]
-
Seite 19
CAUTION —SHOCK HA ZARD: If you are acce ssing the c ontroller bo ard or instal ling optio nal hardware or memo ry devices somet ime after setting up the pr inter, th en turn t he pri nter off , and unplu g the powe r cord from th e electric al outl et befo re conti nuing. If you have an y other devi ces att ached to the print er, then turn them o[...]
-
Seite 20
3 Pul l out the tray fr om the base. 4 Remove any p acking material from in side th e tray. 5 Insert th e tra y into th e bas e. 6 Pla ce the tray near th e printe r. 7 Align th e printer with the t ray, and the n slowly l ower the prin ter into place. Note: O ption al trays l ock tog ether when s tacked. Additi onal print er set up 20[...]
-
Seite 21
8 Connect the p ower c ord to the pr inter , then to a p roperl y grounded electrical outlet, and th en turn on the print er. 1 2 Notes: • When th e printer software and any har dware opt ions are install ed, you may nee d to manual ly add the options in the p rinter d river to make them availa bl e for print jobs. For more infor mation, see “U[...]
-
Seite 22
Attaching cables CAUTION —SHOCK HA ZARD: Do not use the fax feature during a lig htning s torm. Do not set up this prod uct or make any ele ctrical o r cabling c onnection s, such a s the fax feature, power cord, or telepho ne, during a light ning storm . Connect t he printer to the c omputer using a USB ca ble or to the network u sing an Etherne[...]
-
Seite 23
Use the To 5 LINE port Connect the printer to an acti ve tele phone line thr ough a standard wall jack (RJ ‑ 11), DSL filter, or VoIP adapter , or any other adapter that allo ws you to access the tele phone line to send and rece ive faxes. 6 USB printer port Connect the p rinter to a compu ter. 7 Security slot Attach a lock that wi ll secure the [...]
-
Seite 24
3 Click Install , and then follow the instru ctions on the compu ter screen. Updat ing availa ble optio ns in the printer driver When any har dware o ptions a re instal led, you may nee d to manu ally add the optio ns in the p rinter driver to make them availabl e for use. For Windows users 1 Open the printers folder. In Wind ows 8 From th e Search[...]
-
Seite 25
Networking Notes: • Purchase a Ma rkNet TM N8352 wireless networ k adapter first b efore setting up the printer on a wireless netwo rk. For infor mation on installing t he wireless net work adapter , see the setu p sheet that came with the a dapter. • A Servic e Set Id entifier (SSID) i s a nam e assigned to a wirel ess netw ork. Wi red Equi va[...]
-
Seite 26
In Wind ows 7 or earlier a Click , or cl ick Sta rt and then cli ck Run . b In th e Start Search o r Run di alog, typ e D:s e tu p.e xe . c Press Enter , or clic k OK . Note: D is the le tter of y o ur CD or DVD drive. • If you are u sing the downloaded software installer f rom the We b, then double ‑ click the in staller tha t you have saved [...]
-
Seite 27
d Click the IP ta b. e Type the printer IP address in the address field, and then click Add . • For Appl eTalk print ing: Notes: – Make su re Appl eTa lk is ac tivated on you r print er. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, nav igate to: System Prefer ences > Pr int & Fax b Click + , and the[...]
-
Seite 28
Notes: – If you do no t know th e SSID of the networ k that your co mputer is connecte d to, the n launch the wireless u tility of the c omputer net work adap ter, and t hen look f or the network name . If you can not fi nd the SSID o r the securit y informa tion for you r network, t hen see th e document ation t hat came wi th the a ccess poi nt[...]
-
Seite 29
Using the Push Button C onfiguration (PBC) method 1 From the print er cont rol pan el, naviga te to: > Sett ings > > Networ k/Port s > > Network [ x] > > Net work [x] S etup > > Wireless > > Wireless Connection Se tup > > Wi ‑ Fi Prote cted S etup > > Start Pus h Button M ethod > 2 Follow th e instr[...]
-
Seite 30
5 Turn of f the print er, and the n discon nect the Eth ernet ca ble. Then wai t for at leas t five seco nds, and t hen turn the prin ter back on. 6 To veri fy if your printer is connected to the net work, print a network setup pag e. Then in the Network Car d [x] section, see if the status is Connected. Verifying printer setup When all ha rdware a[...]
-
Seite 31
Loading paper and specialty media The sele ction and h andling o f paper and spe cialty med ia can affe ct how reliably do cuments print. F or more inf ormation , see “Avoid ing jams” on page 171 a nd “Sto ring pap er” on page 5 1. Setting the pap er size and type 1 From the print er cont rol pan el, naviga te to: > Settings > > Pa[...]
-
Seite 32
2 Squeeze and then slide the widt h guide tab to the correct positio n for the size of th e paper you are loading. A 4 LT R E X E C B 5 A 5 2 1 Loading pape r and specialty media 32[...]
-
Seite 33
3 Squeeze and then slide the length guide tab to the correct position for th e size of the paper you are loading. A 4 LT R E XE C B 5 A 5 2 1 Notes: • For some pap er sizes like lett er, legal, and A4, s queeze and slid e the length gu ide tab backwar d to accommodate their length . • When loadi ng legal ‑ si ze paper, t he lengt h guide ext [...]
-
Seite 34
A 4 LT R E X E C B5 A 5 4 Flex the sheets ba ck and forth to loosen the m, and then fan them. Do not fold or crease t he paper. Straighten the edges on a level su rface. 5 Load th e paper stack. Notes: • Load with the printable side facedown when using recycled or preprinted paper. • Load prepunched paper with the holes on the to p edge toward [...]
-
Seite 35
• Load le tterhea d facedown , with the top edge of the sheet t oward the front of th e tray. Fo r two ‑ sid ed printing, load letterhead faceup with th e bottom edge of th e sheet toward the fro nt of the tray. • Make sure the paper is belo w the maxim um paper fi ll indic ator loc ated on the side of the width guide. 6 Ins ert the tra y. 7 [...]
-
Seite 36
Loading the multipurpose feeder Use the multipurpose feed er when printing on different paper sizes and types or specialty media, such as card stock, transpar encies, paper label s, and env elopes. You can also u se it for sin gle ‑ pag e prin t jo bs on let terhe ad . 1 Open the multipurpos e feeder. a Pull the multipurpose feeder extender . Loa[...]
-
Seite 37
b Pull the extender gently so th at the multipurpose feeder is fu lly extended and open. 2 Squeeze the tab on the left width gu ide, and then move the gu ides for the paper you are loading. 1 2 3 Prepare the paper or specialty media for loading. • Flex sheets of pap er back and forth to loos en them, and then fan them. Do n ot fold or crease th e[...]
-
Seite 38
• Flex the stack of envelopes back and forth to loo sen them, and then fan them. Straighten the ed ges on a level surf ace. 4 Load the paper or spe cialty media. Notes: • Do not for ce paper o r special ty medi a into the m ultipurpo se feed er. • Make sure the paper or specia lty med ia is below t he max imum paper fill ind icator located o [...]
-
Seite 39
Note: When loadi ng A6 ‑ s ize paper, make sure the m ultipurpose feeder extend er rests lightly against the edge of the pap er so that the last few sh eets of paper remain in place. • Load let terhea d faceu p with th e top edg e entering the pr inter first. For two ‑ sided (duplex ) printing , load letterhead facedown with the bott om edge [...]
-
Seite 40
• Load envelopes with the flap on the left side facedown. Warn ing— Potent ial D amag e: Never us e envelopes with stamps , clasps, snaps, wind ows, coate d linings, o r self ‑ stick adhe sives. T hese env elopes ma y severel y damage th e printer. 5 From the printe r contro l panel, s et the pape r siz e and paper type in the P aper menu to [...]
-
Seite 41
Creat ing a cu stom na me fo r a pape r type Using the Embedded Web Server 1 Open a Web browser, and then type the print er IP address in the ad dress field. Notes: • View the printer IP address in the TCP/IP sect ion in t he Network/Por ts men u. The IP addres s appea rs as four sets of numbers separated by periods, su ch as 123. 123.123.123. ?[...]
-
Seite 42
Using the printer c ontrol panel 1 From the print er cont rol pan el, naviga te to: > Settings > > Pape r Menu > > Custom Names 2 Type a na me for the p aper type , and then press . Assigning a custom paper type Using the Embedded Web Server 1 Open a Web browser, and then type the print er IP address in the ad dress field. Notes: •[...]
-
Seite 43
Paper and specialty media guide Additi onal info rmation f or print ing on s peciali ty media ma y be found in the Ca rd Stock an d Label Gu ide availabl e at http: //suppo rt.lexma rk.com . Paper guidelines Select ing the cor rect pap er or sp ecialty me dia reduces printin g problem s. For th e best print quality, t ry a sampl e of the paper or s[...]
-
Seite 44
Grain direction Grain ref ers to the a lignment of the pape r fibers in a sheet o f paper. Grain is eit her gra in lon g , running the leng th of the paper , or grain short , running the width of the paper . For 60–90 ‑ g/m 2 (16–24 ‑ lb) bond paper, grain l ong paper is recom mended. Fiber content Most h igh ‑ qua lity xerogra phic pap e[...]
-
Seite 45
• Avoid papers wit h rough o r heavily te xtured surfaces. Use papers pr inted with heat ‑ resis tant inks desi gned for use in xerograp hic copie rs. The ink must be a ble to withst and tempera tures up to 230°C (446°F) wi thout melti ng or relea sing ha zardous emiss ions. Use i nks that are n ot affect ed by the re sin in to ner. I nks th [...]
-
Seite 46
Lexmark does not endor se specific suppliers, although a converter’s produ ct list fo r special ap plication s is main tained. However, the follo wing paper choi ce guidelines will help alleviat e the environmental impact of pr inting: 1 Minimi ze paper consumpt ion. 2 Be selective ab out the orig in of wood fiber. Buy fr om suppliers who carry c[...]
-
Seite 47
Paper size and dimension Standard 250 ‑ sheet tray Optional 250 ‑ or 550 ‑ sheet tray Multipurpose feeder ADF Scanner glas s Duplex mode A4 210 x 2 97 mm (8.27 x 11.7 in.) A5 148 x 2 10 mm (5.83 x 8.27 in.) X A6 105 x 1 48 mm (4.13 x 5.83 in.) X X JIS B5 182 x 2 57 mm (7.17 x 10.1 in.) X Letter 215. 9 x 279.4 mm (8.5 x 11 in .) Legal 215. 9 x[...]
-
Seite 48
Paper size and dimension Standard 250 ‑ sheet tray Optional 250 ‑ or 550 ‑ sheet tray Multipurpose feeder ADF Scanner glas s Duplex mode 9 Enve lope 98.4 x 226.1 mm (3.875 x 8.9 in.) XX XX X 10 Envelo pe 104. 8 x 241.3 mm (4.12 x 9.5 in.) XX XX X DL Envelope 110 x 2 20 mm (4.33 x 8.66 in.) XX XX X C5 Enve lope 162 x 2 29 mm (6.38 x 9.01 in.) [...]
-
Seite 49
Paper type 250 ‑ or 550 ‑ sheet tray Multip urpose feede r Duplex mode ADF Scanner glass Envelope 2 X XX Rough envelope X XX Letterhead Preprint ed Colored paper Light paper Heavy paper Rough/Cotton X Custom Ty pe [x] 1 One ‑ sided paper label s designed for laser pr inters ar e support ed for occasion al us e. We recommend printing only up t[...]
-
Seite 50
Tips on us ing en velopes Print sample s on the envelop es being considered for us e before buying large quantit ies. • Use envelopes designed specifically for laser printers. Check with the manufactu rer or vendor to ensure that the envel opes can wi thstand temperat ures up to 230°C ( 446°F) without se aling, wri nkling, curling excess ively,[...]
-
Seite 51
• If zo ne coating o f the adhes ive is not po ssible, t hen remov e a 2 ‑ mm ( 0.06 ‑ inc h) strip on the leading and driver edge, and the n use a no n ‑ oozing a dhesive . • Portra it ori entation is reco mmended, e speciall y when pri nting b ar codes. Tips on us ing card sto ck Card st ock is hea vy, single ‑ ply specialty medi a. M[...]
-
Seite 52
Printing Printing a docume nt Printing a documen t 1 From the Pape r menu o n the prin ter contr ol panel, s et the pa per type and size to matc h the pape r loaded . 2 Send the print jo b: For Windows users a With a do cument o pen, click File > Print . b Click Properties , Pref erenc es , Op tions , or Setup . c Adju st the sett ings , if nece[...]
-
Seite 53
Using the printer c ontrol panel 1 From the print er cont rol pan el, naviga te to: > Settings > > Print Se ttings > > Quality Menu > > Toner Da rkness 2 Adjust the toner darkness, and then press . Print ing fr om a mo bile device To downloa d a compat ible mobil e printing applicat ion, visi t www.lexmark .com/mobil e . Note: [...]
-
Seite 54
Printing confidential an d other he ld jobs Note: Confidentia l and Verify print jobs are automatic ally deleted from m emory afte r printin g. Repeat an d Reserve jobs are held in the printer u ntil you ch oose to delete th em. For Windo ws user s 1 With a d ocu ment o pen, c lick F ile > Print . 2 Click Properties , Pre feren ces , Options , o[...]
-
Seite 55
• If you are using a proxy se rver, then tempo rarily disable it to load the Web page correctly. 2 Click Setti ngs tab > Security > Confid ential Pr int Setu p . 3 Modify th e settin gs: • Set a maximum number of PIN entry attempts. When a user exceeds a sp ecific number of PIN entry attempts, all of the jobs for t hat user are deleted. ?[...]
-
Seite 56
In Wind ows 7 or ea rlier a Click o r click Start , and then click Run . b In the Sta rt Searc h or Run di alog, typ e control printer s . c Pres s Enter , or cli ck OK . 2 Doub le ‑ click the pri nter icon. 3 Select the print jo b you want to cancel . 4 Click Delet e . For Macintosh users 1 From the Appl e menu, navig ate to e ither of the fo ll[...]
-
Seite 57
Copying Automatic d ocument feed er (ADF) Scanner glass Use the ADF for m ulti ple ‑ page documents includin g two-sided (duplex) pages. Use the scanner g lass for single-page documents, book pages , small items (such as postcar ds or photos), transparenc ies, photo paper, or thin media (such as m agazine clippin gs). Making copies Making a qu ic[...]
-
Seite 58
• The ADF indica tor lig ht comes on when th e paper is l oaded pro perly. 2 Adjust the paper guides. 3 From the printe r contro l panel , use the keypad to ent er the number of copies, and then pres s . Copyin g using the scanner gl ass 1 Place an origina l docume nt facedo wn on the s canner g lass in th e upper lef t corner. 2 From the printe [...]
-
Seite 59
3 From the print er cont rol pan el, naviga te to: > Copy > > Copy from > sele ct the si ze of t he origi nal doc ument 4 Navigate to: Copy to > > select the tray containing the transparencies > > select the number of copies or enter a number on the keypad > 5 If there are no trays th at contain transparencies, then do th[...]
-
Seite 60
Note: If you want to copy anot her docume nt, then place it on the sca nner gla ss, press th e left or right arro w button to sc roll to Scan the Next Page , an d then pre ss . 6 Pre ss the le ft or ri ght arrow bu tton to scroll to Finish the Job , and t hen press . Customizing copy setting s Copyin g to a differen t size 1 Load an o riginal do cu[...]
-
Seite 61
4 Navigate to: Copy to > > select t he tray co ntaining th e paper size and t ype you want to use > > s elect the number of copies or enter a number on the keypad > 5 If ther e are no t rays that c ontain the paper si ze and type you want t o use, then d o the follo wing: a Navigate to: Copy to > > Ma nual Feed er > > s e[...]
-
Seite 62
Notes: • Do not lo ad postcar ds, photos , small it ems, tran sparencies , photo paper, o r thin me dia (such as magaz ine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indica tor lig ht comes on when th e paper is l oaded pro perly. 2 If you are loading a document into the ADF tray, then adjust the paper guide[...]
-
Seite 63
3 From the print er cont rol pan el, naviga te to: > Copy > > Cont ent Ty pe > se lect the conte nt type of the o rigin al docum ent 4 Press the le ft or ri ght ar row butt on to s croll to one o f the foll owing: • Text —The content of th e original d ocument is mostly tex t or line art. • Text/Pho to —The original document is [...]
-
Seite 64
• The ADF indica tor lig ht comes on when th e paper is l oaded pro perly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the print er cont rol pan el, naviga te to: > Copy > > Col late > select the collate set ting you want > select the number of c opies or ente r a number on the keypa d &g[...]
-
Seite 65
Notes: • Do not lo ad postcar ds, photos , small it ems, tran sparencies , photo paper, o r thin me dia (such as magaz ine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indica tor lig ht comes on when th e paper is l oaded pro perly. 2 If you are loading a document into the ADF tray, then adjust the paper guide[...]
-
Seite 66
Cancelin g a copy job Canceli ng a copy job from the printer control panel 1 From the print er cont rol pan el, press . 2 When a li st of copy jo bs appears, select t he job to cancel, and t hen press . 3 Press to go back to the home scr een. Understanding th e copy options Copies This op tion l ets you set the numb er of co pies to be prin ted. Co[...]
-
Seite 67
Scale This op tion l ets you sc ale th e docume nt from 25% to 400% of the ori gina l documen t size. Yo u can a lso set au tomati c scal ing. • When copying to a dif ferent paper s ize, such as fro m legal ‑ size to let ter ‑ size paper, set the “Copy f rom” and “C opy to” paper siz es autom atica lly to sca le the scan ima ge to fit[...]
-
Seite 68
Advanced Duplex This option lets you specify the docum ent orien tation, whethe r document s are one-sided or two-sided, and how docume nts are bound. Overlay This op tion l ets you cr eate a watermar k (or mes sage) th at overla ys the co ntent of yo ur copy. You can choose from Conf ide ntial , Co py, Dra ft, Urg ent , an d Cu stom . Yo u ca n t [...]
-
Seite 69
E-mailing Automatic d ocument feed er (ADF) Scanner glass Use the ADF for m ulti ple ‑ page documents includin g two-sided (duplex) pages. Use the scanner g lass for single-page documents, book pages , small items (such as postcar ds or photos), transparenc ies, photo paper, or thin media (such as m agazine clippin gs). You can us e the prin ter [...]
-
Seite 70
• If you are using a proxy se rver, then tempo rarily disable it to load the Web page correctly. 2 Click Setti ngs > E-mail/FTP Settings > E-mail Setti ngs . 3 Enter t he appropriate informa tion, and th en click Submit . Creating an e-mail shortcut Creati ng an e-mail shortcut using the Em bedded Web Server 1 Open a Web browser, and then t[...]
-
Seite 71
Notes: • Do not lo ad postcar ds, photos , small it ems, tran sparencies , photo paper, o r thin me dia (such as magaz ine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the pap er is properly loaded. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3[...]
-
Seite 72
Faxing Automatic d ocument feed er (ADF) Scanner glass Use the ADF for m ulti ple ‑ page documents includin g two-sided (duplex) pages. Use the scanner g lass for single-page documents, book pages , small items (such as postcar ds or photos), transparenc ies, photo paper, or thin media (such as m agazine clippin gs). Setting up the printer to fax[...]
-
Seite 73
Initial f ax setup Many coun tries and regi ons requ ire ou tgoing faxes to contai n the fol lowing in formati on in a margin at the to p or bot tom of each transm itted page, or on the first page of the transm ission: fax na me (i dentific ation o f the bu siness , other entit y, or indi vidual se nding the message ) and fax number (tel ephone nu [...]
-
Seite 74
Choos ing a fax conn ecti on Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax l ine To conn ect: 1 Connec t one end o f the tel ephone cabl e that c ame with the printer t o the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. Tips fo r this se tup: • You c an s[...]
-
Seite 75
Setup 2: Printer is sharing the li ne with an answering machine Connect ed to th e sa me telep hone wall j ack P H O N E L IN E To conn ect: 1 Connec t one end o f the tel ephone cabl e that c ame with the printer t o the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. 3 Connect the answering machi[...]
-
Seite 76
Connec ted to differ ent wall j acks P H O N E L IN E To conn ect: 1 Connec t one end o f the tel ephone cabl e that c ame with the printer t o the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. Tips fo r this se tup: • If yo u have only one telep hone n umber on your l ine, the n you n eed to s[...]
-
Seite 77
Setup 3: Printer is sharing the li ne with a telephone subscribed to voice mail s ervice 02 To conn ect: 1 Connec t one end o f the tel ephone cabl e that c ame with the printer t o the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. 3 Connect the telephon e to the port of th e printer. Tips fo r t[...]
-
Seite 78
Scenario 2: Digital Subscriber Line (DSL) A Digital Subscri ber Line sp lits your regular t elephone line into t wo channels : voice an d Interne t. Telepho ne and fa x signals travel through t he voice c hannel, and Interne t signals p ass throug h the ot her chann el. This way, yo u can use the sa me line for analog v oice cal ls (inclu ding faxe[...]
-
Seite 79
Scenario 3: VoIP telephone service To conn ect: 1 Connec t one end o f the tel ephone cabl e that c ame with the printer t o the port of the printer. 2 Connect the other end o f the cable to the po rt labeled Phone Line 1 or Phone Port on the VoIP adapter. Note: The port labele d Phone Line 2 or Fax Po rt is not always ac tive. VoIP p roviders ma y[...]
-
Seite 80
Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem 1 Connec t one end o f the tel ephone c able that c ame with you r printer to the por t of the pri nter. 2 Connect the other end o f the cable to the po rt labeled Phone Line 1 or Phone Port on the cable mod em. Note: The port labe[...]
-
Seite 81
Setup 2: Printer is connected to a wall jac k; cable modem is installe d elsewhere in the facility 1 Connec t one end o f the tel ephone c able that c ame with you r printer to the por t of the pri nter. 2 Connec t the other end of the t elephone cable to an activ e analog telepho ne wall jac k. 3 Connec t your anal og tele phone to the port of the[...]
-
Seite 82
If the wall jack or equipment in your facility is not compat ible with t his typ e of conn ecti on, the n you n eed to us e a telepho ne adapte r. An adapt er for yo ur countr y or regi on may not come with you r printe r, and you ma y need to purchas e it sep aratel y. There may be an adapter plug inst alled in th e port of the printer . If you ar[...]
-
Seite 83
Connecting the printer to a non ‑ RJ ‑ 11 wall ja ck LINE EXT 1 Connec t one end o f the tel ephone c able that c ame with prin ter to t he port of the printer. 2 Connect the other en d of the cable to the RJ ‑ 11 adapte r, and then connect the adap ter to the wall ja ck. 3 If you want to co nnect ano ther dev ice (te lephone or answerin g ma[...]
-
Seite 84
Connecting the pri nter to a wall jack in Germany The G erman w all jack h as two kind s of ports. The N port s are for fax machines, modems, and answering machines. The F port is for tele phones. NF N Connect t he printer to any of th e N ports. P H O N E LIN E NFN Faxing 84[...]
-
Seite 85
1 Connec t one e nd of the te lephone cable that cam e the print er to the port of the p rinter. 2 Connec t the other e nd of the teleph one cabl e to th e RJ ‑ 11 adapter, a nd then co nnect th e adapter to an N port. 3 If you want to conne ct a tel ephone and answeri ng machine t o the same wall jack, then connect t he device s as shown . Note:[...]
-
Seite 86
Setting the da te and time You can s et the da te and tim e so that they are printed on every fax you se nd. If the re is a powe r fail ure, then yo u may have to rese t the d ate and time. 1 Open a Web browser, and then type the print er IP address in the ad dress field. Notes: • View the printer IP address in the TCP/IP sect ion in t he Network[...]
-
Seite 87
3 From the print er cont rol pan el, naviga te to: > Fax > > enter a fax or shor tcut number on th e keypad > > Original S ize > Note: If you want to fax anot her docume nt, then place it on the sc anner gla ss, press t he left or right ar row button to sc roll to Scan the Nex t Page , and then press . 4 Pre ss the le ft or ri ght[...]
-
Seite 88
• The ADF indica tor lig ht comes on when th e paper is l oaded pro perly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 Press # , and then enter th e shor tcut nu mber on the ke ypad. 4 Press . Sending a fax using th e address boo k The addre ss book f eature let s you search f or bookm arks and ne twork dire[...]
-
Seite 89
Notes: • View the printer IP address in the TCP/IP sect ion in t he Network/Por ts men u. The IP addres s appea rs as four sets of numbers separated by periods, su ch as 123. 123.123.123. • If you are using a proxy se rver, then tempo rarily disable it to load the Web page correctly. 2 Click Setti ngs > Man age Shortcuts > Fax Shortc ut S[...]
-
Seite 90
• The ADF indica tor lig ht comes on when th e paper is l oaded pro perly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the print er cont rol pan el, naviga te to: Fax > > enter the f ax number > > Dar kness > adjust the dark ness of th e fax > Viewin g a f ax log 1 Open a Web browser, [...]
-
Seite 91
Cance ling a fax job afte r scan ning the orig ina l docu ment s 1 From the print er cont rol pan el, press . 2 Press the le ft or ri ght ar row butt on to s croll to the jo b you wan t to can cel. 3 Press > Delete Se lected Jo bs . Holding and forwarding faxes Hold ing faxe s This option lets you hold received faxes from printing unti l they ar[...]
-
Seite 92
5 In the “Forward to Shortc ut” fie ld, ente r the sho rtcut num ber where yo u want th e fax fo rwarded. Note: The shortcut number must be valid for t he setting selected in the “Forward to” menu. 6 Click Submit . Understanding the fax options Original Size This opt ion lets you c hoose the size o f the docum ents you a re going to fax. 1 [...]
-
Seite 93
Conten t Source This opt ion lets you s et the or iginal do cument sour ce. Select f rom th e followi ng cont ent so urces : • Color Laser —The origina l document was pri nted using a color la ser printer. • Black/Wh ite Las er —The original docume nt was prin ted using a mono lase r printer . • Inkjet —Th e o rigi nal doc ument was pr [...]
-
Seite 94
Scanning Scanning t o an FTP ad dress Automatic d ocument feed er (ADF) Scanner glass Use the ADF for m ulti ple ‑ page documents includin g two-sided (duplex) pages. Use the scanner glass fo r single-pag e documents, book pages, small items (such as postcards or ph otos), transpare ncies, photo p aper, or thin media (such as mag azine clipping s[...]
-
Seite 95
4 Enter a shor tcut num ber. If you enter a num ber that is already in u se, then you are prompt ed to select another nu mber. 5 Click Add . Scanning to an FTP addre ss Scanning to an FTP address using a shortcut number 1 Load an o riginal do cument f aceup, sho rt edge first i nto the AD F tray or fac edown o n the scan ner glas s. Notes: • Do n[...]
-
Seite 96
Scanning t o a compu ter Automatic d ocument feed er (ADF) Scanne r glass Use the ADF for m ulti ple ‑ page documents. Use the sc anner glass for sing le pages, small items (such as postcard s or photos), transp arencies, photo paper, or thin media (such as magazine clippings) . The scan ner let s you scan d ocuments directl y to a co mputer. The[...]
-
Seite 97
Notes: • Do not l oad postcar ds, pho tos, small items, tr ansparenc ies, phot o paper, or thin m edia (such a s magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light turns on when t he paper is loaded prop erly. b If you are load ing a documen t into the AD F tray, then ad just the p aper guid[...]
-
Seite 98
Understandin g the printer menus Menus list Paper Menu Reports Network/Ports Security Settings Default Source Paper Siz e/Type Configure M P Substitute Size Paper Texture Paper Weight Paper Loadi ng Custom Types Custom Scan Sizes Universal Setup Menu Settings Page Device S tatistics Network Setup Page 1 Shortcu t List Fax Jo b Log Fax Cal l Log Cop[...]
-
Seite 99
Paper menu Default Sourc e menu Use To Default Source Tray [x] MP Feeder Manual Paper Manual Envelope Set a default pap er source for all print jobs. Note s: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to “Cassette” for MP Feeder to appear as a menu settin g. • If the same size and type[...]
-
Seite 100
Use To MP Feeder Siz e A4 A5 A6 JIS B 5 Letter Legal Executive Oficio ( Mexico) Folio Stat emen t Universal 7 3/4 E nvelo pe 9 Envelo pe 10 Env elope DL Envelo pe C5 En vel ope B5 Env elope Oth er En velo pe Specify the si ze of the paper loaded in the multipurpose feeder. Notes: • Lett er i s th e U.S . fa ctor y defa ul t set ting . A4 is th e [...]
-
Seite 101
Use To Manual Paper Size A4 A5 A6 JIS B 5 Letter Legal Executive Oficio ( Mexico) Folio Stat emen t Universal Specify the size of the paper being manually lo aded. Note: Letter is the U.S. factory default setting. A4 is the internati onal factory default setting. Manual Paper Type Plain Pape r Card Sto ck Transparency Recy cled Labels Bond Letterhe[...]
-
Seite 102
Configu re MP menu Use To Conf igur e MP Cassette Manual First Determine when the printer s elects paper from the multipurpose fe eder. Note s: • Cassette is the factory default setting. Cassette configures the multipurpo se feeder as the automatic paper source. • Manual sets the multipurpo se feeder only for manual ‑ feed print jobs. • Fir[...]
-
Seite 103
Use To Labels Texture Smoo th Normal Rough Specify the relati ve texture of the la bels loaded. Note: Normal is the factor y default setting. Bond Texture Smoo th Normal Rough Specify the relative texture of th e bond paper loaded. Note: Rough i s the factory default setting. Envelope Texture Smoo th Normal Rough Specify the relative text ure of th[...]
-
Seite 104
Paper Weig ht menu Use To Plain Weight Light Normal Heavy Specify the relative weight of the plain paper loaded. Note: Normal is the factory defa ult setting. Card S tock Weigh t Light Normal Heavy Specify the relative weight of the car d stock loaded. Note: Normal is the factory defa ult setting. Trans pare ncy We igh t Light Normal Heavy Specify [...]
-
Seite 105
Use To Colo red We ight Light Normal Heavy Specify the relative weight of the colored paper loaded. Note: Normal is the factory defa ult setting. Light W eight Light Specify that the relative weight of the paper loaded is light. Heavy Weight Heavy Specify the relati ve weight of the paper loaded is heavy. Rough/Cotton Weight Light Normal Heavy Spec[...]
-
Seite 106
Use To Light Lo ading Duplex Off Determine and set two ‑ sided printing for all print jobs that speci fy Light as the paper type. Heav y Loadi ng Duplex Off Determine and set two ‑ sided printing for all print jobs that speci fy Heavy as the paper type. Custom [x ] Loadi ng Duplex Off Determine and set two ‑ sided printing for all print jobs [...]
-
Seite 107
Custom Sc an Sizes m enu Use To Cust om Sc an Siz e [x ] Scan Size Name Widt h Height Orient ation Portrai t Landscape 2 scans per side Off On Specify a custom scan size name and page ori entation. Notes: • The custom scan size name replaces Custom Scan Size [x] in the printer menus. • ADF Media Type is the factory default setting f or custom s[...]
-
Seite 108
Use To Feed Direction Short Edge Long Edge Specify the feed direction if the paper can be loaded in either direction. Note s: • Short Edge is the factory defaul t setting. • Long Edge appears onl y when the longest edge is shorter than the maximum width suppor ted in the tray. Reports menu Reports me nu Use To Menu Settings Page Print a repor t[...]
-
Seite 109
Networ k/P orts m enu Active NIC menu Use To Active NIC Auto [list of available ne twork cards] Note s: • Auto is t he fac tory d efault setting . • This menu item appe ars only when an optional ne twork card is instal led. Standard Network o r Networ k [x] menu Note: Only active p orts appear i n this menu. All inactive p orts are omitte d. Us[...]
-
Seite 110
Use To Network Buffer Auto 3KB to [maximum size allowed] Set the size of the network inp ut buffer. Note s: • Auto is t he fac tory d efault setting . • The value can be changed in 1KB increments. • The maximum size allowed depends on th e amount of memory in the pri nter, the size of the other link buffers, and whether Resource Save is set t[...]
-
Seite 111
Use To View C ard Status Connected Discon nected View the connection status of the wirel ess network adapter. View Card Sp eed View the speed of an acti ve wireless network adapter. Network Address UAA LAA View the network addresses. Job Timeout 0, 10 –225 second s Set the amount of time it takes for a networ k print job to be canceled. Note s: ?[...]
-
Seite 112
Use To Enable BOOTP On Off Specify the BOOTP address assignment setting. Note: On is the factory default setting. Enable AutoIP Yes No Specify the Zero Configurati on Networking setting. Note: Yes is the fa ctory d efault setting . Enable FTP/TFTP Yes No Enable the b uilt-in FTP server, which lets you s end files to the printe r using Fi le Transfe[...]
-
Seite 113
Use To Auto Configuration On Off Specify whether or not the wireless network adapter accepts the automatic IP v6 address configuration entries pro vided by a router. Note: On i s the fact ory default setti ng. View Ho stname Se t the h os t name . Note: These settings can be chang ed only from the Embedded Web Serv er. View Address View R oute r A [...]
-
Seite 114
Use To View Se curity Mode View the encryption method for the wireless network. AppleT alk menu Note: This menu is available only in prin ter mode ls connect ed to a wire d networ k or when an o ptional network ca rd is installed. To acces s the m enu, navi gate to any of the fo llowing: • Networ k/Po rts > Standa rd Ne twork > Standard Net[...]
-
Seite 115
Use To Use SSL Disabled Negotiate Requ ired Set the printer to use SSL for inc reased security when connecting to the SMTP serv er. Note s: • Disabled is the fact ory default setti ng. • When the Negotiate setting is used, the SMTP s erver determines if SSL will be used. SMTP Server Authentication No authentication required Login/Plai n CRA M ?[...]
-
Seite 116
Use To Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remot e Syslog Facility 0–23 Severity of events to log 0–7 Specify how and whether or not aud it logs are created . Notes: • Enable Audit determines if events are recor ded in the secure audit log and remote syslog. No is the factory default setting. • Enable Remote Syslog[...]
-
Seite 117
Settings menu General Settin gs menu Use To Display L anguage English Francai s Deuts ch Italiano Espanol Dansk Norsk Nederlands Svens ka Portugu ese Suom i Russ ian Polski Greek Magyar Turkce Cesk y Simpli fied Chine se Traditional Chi nese Korean Japanese Set the language of the text appear ing on the printer display. Note: Not a ll languages are[...]
-
Seite 118
Use To Run Initia l setup Yes No Run the setup wizard. Notes: • Yes is the factory default setting. • After completing the setup wiza rd by selecting Done at the country or regi on selection screen, the default becomes No. Paper Si zes US Metric Specify the unit of measurement for paper si zes. Notes: • U.S. is the factory default setting. ?[...]
-
Seite 119
Use To Alarms Alarm C ontrol Cartridge A larm Set an alarm to sound when the printer requi res user intervention. When activated, Alarm Co ntrol lets you set the number of times that the alarm sounds, while Cartridge Alarm lets you stop printing when a cartri dge ‑ low conditio n occurs. For each alarm type, select from t he followin g options: O[...]
-
Seite 120
Use To Timeou ts Screen Timeout 15–30 0 sec Set the amount of time in seconds the prin ter waits before returning the display to th e Ready state. Note: “30 sec” i s the factory default settin g. Timeou ts Print Timeout Dis abled 1–255 se c Set the amount of time in seco nds the printer waits to receive an end ‑ of ‑ job message bef ore[...]
-
Seite 121
Use To Print Reco very Jam Assi st On Off Set the printer to automati cally check for jammed pap er. Note: On i s the fact ory default setti ng. Print Reco very Page Prot ect Off On Let the printer successfully print a page that may not have printed otherwise. Notes: • Off is the factory default setti ng. This prints a partial page when there is [...]
-
Seite 122
Copy Settin gs menu Use To Content Type Text Graphics Text/Photo Photo Specify the content of the origi nal document. Note: Text/P hoto is the factory default setting. Content Source Black/ White Laser Colo r Lase r Inkjet Photo/Film Magazine Newspaper Press Other Specify how the original documen t was produced. Note: Black/White Laser i s the fact[...]
-
Seite 123
Use To Orig inal Size Letter Legal Executive Folio Stat emen t Oficio ( Mexico) Universal Auto Si ze Sens e A4 A5 A6 JIS B 5 Custom Scan Size [x] Book Orig inal Busi ness C ard 3 x 5 in . 4 x 6 in . ID Card Specify the p aper size of the original document . Notes: • Letter is the U.S. factory default setting . • A4 is the intern ational fact or[...]
-
Seite 124
Use To Overla y Con fide ntial Cop y Draf t Urgent Cust om Off Specify the overlay text printed on each page of the copy job. Note: Off is the facto ry defaul t setti ng. Custo m Overlay Specify the custom overlay text. Note: A maximum of 64 charac ters is allowed. Allow pr iority copies On Off Allow interrupt ion of a print job to copy a pag e or [...]
-
Seite 125
Use To Adjust ADF Skew Auto Off On Correct slight skew in the scanned image. Note: Auto is the factory default setting. Scan edge to edge Off On Specify if the origi nal document is scanned edge ‑ to ‑ edge. Note: Off is the facto ry defaul t setti ng. Sharpness 1–5 Adjust the amount of sharpness of a copy. Note: 3 is the factory default sett[...]
-
Seite 126
Use To Cal ler ID Off Primary Altern ate Specify the typ e of caller ID being used . Fax number ma sking Off From lef t From ri ght Specify the direction fr om where digits are masked in an outgoing fax number. Notes: • Off is the fac tory def ault set ting. • The number of characters mask ed is determined by the “Digits to mask” setting. D[...]
-
Seite 127
Use To Orig inal Size Letter Legal Executive Folio Stat emen t Oficio ( Mexico) Universal Auto Si ze Sens e Mixed Sizes A4 A5 A6 JIS B 5 Custom Scan Size [x] Book Orig inal Busi ness C ard 3 x 5 in . 4 x 6 in . Specify the p aper size of the original document . Note: Mixed Sizes is the US facto ry def ault sett ing . A4 is the in ter nati ona l fac[...]
-
Seite 128
Use To Behind a PABX Yes No Enable or disable switchboar d blind dialing without a di al tone. Note: No is the factory default setting. Enable ECM Yes No Enable or disabl e Error Correction Mode for fax jobs . Note: Yes is the fa ctory d efault s etting . Enab le Fax Sc ans On Off Fax files that are scanned at the pri nter. Note: On is the factory [...]
-
Seite 129
Use To Mirror I mage Off On Create a mirror image of the original document. Note: Off is the facto ry defaul t setti ng. Negative Image Off On Create a negative image o f the original document. Note: Off is the facto ry defaul t setti ng. Shadow Deta il ‑ 4 to 4 Adjust the amount of shadow detail visible. Note: 0 is the factory default setting . [...]
-
Seite 130
Use To Paper Source Auto Tray [x] MP Feeder Specify the paper source for pri nting incoming fax jobs. Note : Auto is the factory default setting. Sides (Duplex) Off On Enable two ‑ sided ( duplex) prin ting for incoming fax jobs. Note : Off is the fa ctory defau lt set ting. Separator Sh eets Off Before Job After J ob Enable the printer to inc lu[...]
-
Seite 131
Use To Transm ission Log Print log Do not print log Print only for error Enable prin ting of a transmission log af ter each fax job. Note : Pr in t log is the fa ct ory d efaul t se tti ng. Receive Error Log Print Never Print on Error Enable prin ting of a receive error log foll owing a receive error . Note : Print Never is the factory de fault set[...]
-
Seite 132
Use To All Ri ngs Single Ring Onl y Double Ring Only Tri ple Ri ng Only Single or Double Rings On ly Sing le or Tri ple Ring s Onl y Double or Triple Rings Only Specify ring pat terns when the printer is answering c alls. Note : All Rings is the f actory default settin g. E ‑ mail Sett ings menu Use To E ‑ mail Serve r Setup Send me a copy Neve[...]
-
Seite 133
Use To Resoluti on 75 dpi 150 d pi 200 d pi 300 d pi 400 d pi 600 d pi Specify the resolution of the scan in dots p er inch. Note: 150 dp i is the fac tory defaul t setting. Darkness 1–9 Lighten or darken the outpu t. Note: 5 is the fa ctory d efault setting. Orientation Portrai t Landscape Specify th e orientation of the scanned image. Note: Por[...]
-
Seite 134
Use To JPEG Quality Best f or conte nt 5–90 Set the q uality of a JPEG p hoto image i n relation to file size and q uality of the image. Notes: • “Best for content” is the factory default setting. • 5 reduces the file size and quality of the image. • 90 p ro vides t he b est i mag e qu ali ty, bu t th e f ile s ize is v ery la rge. • [...]
-
Seite 135
Use To Color Dropout Color Dropout None Red Green Blue Default R ed Thresho ld 0–255 Defau lt Gree n Thre shold 0–255 Default B lue Thresh old 0–255 Specify which c olor to drop and to adjust the dr opout setting for each color threshol d. Notes: • None is the factory default setting for Color Dropout. • 128 is t he factory default settin[...]
-
Seite 136
FTP Settings menu Use To Forma t PDF (.pdf) Secure PDF (.p df) TIFF (.tif) JPEG (.jpg) XPS ( .xps) Specify the format of the file for FTP sending. Note: PDF (.pdf) i s the factory default setting. PDF Vers ion 1.2–1. 7 A–1a Set the version level of th e PDF file for FTP sending. Note: 1.5 is the factory defaul t setting . Content Type Text Grap[...]
-
Seite 137
Use To Orig inal Size Letter Legal Executive Folio Stat emen t Oficio ( Mexico) Universal Auto Si ze Sens e Mixed Sizes A4 A5 A6 JIS B 5 Custom Scan Size [x] Book Orig inal Busi ness C ard 3 x 5 in . 4 x 6 in . Specify th e paper size of the original docum ent. Notes: • Letter is the U.S. factory default setting . • A4 is the inter national fac[...]
-
Seite 138
Use To Use Multi ‑ Page TIFF On Off Choose between si ngle-page TIFF fi les and multiple ‑ page TIFF file s. For a m ultiple-p age scan ‑ to ‑ FTP j ob, eit her on e TI FF file i s c re ate d co ntai ni ng a ll t he pages, or multiple TIFF file s are created with one file for each page of the job. Notes: • On is the factory default settin[...]
-
Seite 139
Use To Negative Image Off On Create a negative imag e of the original document. Note: Off i s the factory d efaul t settin g. Shadow Deta il ‑ 4 to 4 Adjust the amount of shadow detail visible on a scanned image. Note: 0 is the factor y defaul t setti ng. Adjust ADF Skew Auto Off On Correct slight skew in the scanned image. Note: Auto is the fact[...]
-
Seite 140
Finishing menu Use To Sides (Duplex) 1 sid ed 2 sid ed Spec ify whet her two ‑ sided (duplex) printing is set as the user default setting for all print jobs. Notes: • “1 sided” is the factory default setting. • You can set two ‑ sided printin g from the software program. For Windows users: Clic k Fi le > Print , and then click Proper[...]
-
Seite 141
Use To Paper Save r Off 2 ‑ Up 3 ‑ Up 4 ‑ Up 6 ‑ Up 9 ‑ Up 12 ‑ Up 16 ‑ Up Print multiple pages on one shee t of paper. Notes: • Off is the fact ory defau lt setti ng. • When the number of pages per shee t is selected, each page is sca led so that the number of pages you want can be displa yed on the sheet. Paper Saver Or dering H[...]
-
Seite 142
Use To Enhance Fine Lines On Off Enable a prin t mode preferable for files such as archit ectural drawings, maps , electrical circuit diag rams, and flow charts. Notes: • Off is the fact ory defau lt setti ng. • You can set this option fr om the printer software. For Windows users, click File > Prin t , and then click Properti es , Pr efe re[...]
-
Seite 143
XPS menu Use To Print Error Pages Off On Print a page c ontaining info rmation on erro rs, including XM L markup errors . Note : Of f is th e facto ry default se tting. PDF menu Use To Scale t o Fit Yes No Scale page content to fit the sel ected paper size. Note : No is the factory default setting. Annotations Do Not Print Print Print annotati ons [...]
-
Seite 144
Use To PCL Emulation Settings Pitch 0.08–100 .00 Specify the font pitch fo r scalable monospaced f onts. Note s: • 10 is t he factory def ault setting. • Pitch refe rs to the number of f ixed ‑ space characters pe r inch (cpi). This can be increased or decr eased in 0.01 ‑ cp i inc reme nts. • For no n ‑ scalable monospaced fonts, the[...]
-
Seite 145
Use To Tray Renumber Assign Multipurpose F eeder Off None 0–199 Assign Tray [x] Off None 0–199 Assign Manual Paper Off None 0–199 Assign Manual Envelope Off None 0–199 Configure the printer to work with pr inter software or pr ograms that use different source ass ignments for trays and feeders. Note s: • “Off” is the fa ctory de fault[...]
-
Seite 146
HTML menu Use To Font Name Albertus MT Antiq ue Oliv e Appl e Chan cery Arial MT Avant Garde Bodoni Bookma n Chi cago Clarendon Coop er B lack Copperplate Coro net Cou rier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers Joanna MT Lett er G ot hic Lubalin Graph Marigold MonaLisa Rec ut Monaco[...]
-
Seite 147
Use To Margin S ize 8–25 5 mm Set the page margi n for HTML documents. Note s: • 19 mm is the factory default setting. • Margin size can be increased in 1 ‑ mm increments. Backgrounds Do Not Print Print Specify whether to print backgrounds on HTML docu ments. Note : Print is the factory default setting. Image m enu Use To Auto Fit On Off Se[...]
-
Seite 148
Menu item Description E ‑ mail Guide Provides information abou t sending e ‑ mail s using addresses, shortcut numbers, or the address book, and about changing settings Fax Guide Provides information about sending faxes using fax numbers, shortcut numbers, or the address book, and abo ut changing settings FTP Guide Pr ovides information about sc[...]
-
Seite 149
Saving money and the environment Lexmark is co mmitted to environmental sustainabi lity and is continuall y improv ing its printer s to reduc e their impac t on the environment. We design with the environment in mind, engineer ou r packaging to redu ce materials, and provide coll ection and re cycli ng progra ms. For mor e inform ation, see : • T[...]
-
Seite 150
Avoid paper jams Correct ly set the p aper typ e and size to avoid p aper jams . For mor e informatio n, see “ Avoiding jams” on pag e 171. Saving energy Using Eco ‑ mo de Use Eco ‑ Mode to quickly s elect on e or more ways to reduc e your print er's env ironmenta l impact . 1 From the print er cont rol pan el, naviga te to: > Setti[...]
-
Seite 151
Use To On Reduce printer noise. Note s: • Print jobs process at a re duced speed. • Printer engine motors do not start until a document is ready to print. There is a short del ay before the first page is printed. • The alarm control and cartridge alar m sounds are turned off. • The printer ignores the Advance Sta rt command. Off Use fac tor[...]
-
Seite 152
Using Hi bernate mode Hibernate is an ultra ‑ low ‑ power opera ting mode . When operatin g in Hiber nate mode, a ll othe r system s and dev ices are powe red down saf ely. Notes: • Make su re to wake t he printe r from Hib ernate mode befo re sending a print jo b. A hard reset or a long pre ss of the Sl eep butt on wakes the prin ter from Hi[...]
-
Seite 153
Notes: • View the printer IP address in the TCP/IP sect ion in t he Network/Por ts men u. The IP addres s appea rs as four sets of numbers separated by periods, su ch as 123. 123.123.123. • If you are using a proxy se rver, then tempo rarily disable it to load the Web page correctly. 2 Click Setti ngs > Ge neral S etti ngs . 3 In the Screen [...]
-
Seite 154
Recycling Lexmark packaging Lexmark cont inually str ives to minim ize packaging. Less packag ing helps t o ensure th at Lexmark p rinters are tr ansported in the most efficient and environmentally sensitiv e manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy sav ings, and natural [...]
-
Seite 155
Securin g the prin ter Statement of Volatility Your print er co ntains va rious t ypes of m emory tha t can stor e devic e and netw ork sett ings, and us er data. Type of memory Description Volatile memory Your printer uses stand ard random access mem ory (R AM) to temporarily buffer user data du ring simple print jobs. Non-volatile memory Your pri[...]
-
Seite 156
The printer w ill perform a po wer ‑ on rese t, and then retu rn to no rmal opera ting mode. Finding printer secu rity in formation In high-sec urity e nvironme nts, it may be necessary to take addi tional st eps to ma ke sure that confidenti al data s tored in the pri nter cannot be a ccess ed by un auth orized pers ons. For more info rmatio n, [...]
-
Seite 157
Maintaining the printer Cleaning the printer pa rts Cleaning th e printer Note: You ma y need to perf orm th is task af ter every f ew mon ths. Warn ing— Potent ial D amag e: Dam age to the p rinter caused by im proper handling is not co vered by t he printer warranty. 1 Make sure that the printer is turned off and unplu gged from the electrical [...]
-
Seite 158
Cleaning th e scanner glass Clean th e scanner glass if you encounte r print quality pro blems, such a s streaks on copied or scanned images. 1 Slight ly dampen a soft, li nt-free c loth or pa per towel wi th wate r. 2 Open t he sc anner cover. 3 Clean all the areas shown, and then let them d ry. 1 White underside of the scanner cover 2 Scann er g [...]
-
Seite 159
Checking the stat us of parts an d supplies A message app ears on the display whe n a replacement supply item is neede d or when maintenance is required . Checki ng the status of parts and supplies on the printe r control pan el From the printer contro l panel, nav igate to : > Status/S uppli es > > Vi ew Suppl ies > Checki ng the statu[...]
-
Seite 160
Ordering su pplies To order part s and su pplies i n the U.S. , contact Lexmark at 1-8 00-539-6275 for informa tion about Lexmar k authori zed supplie s deal ers in your a rea. In o ther cou ntrie s or regi ons, vi sit the L exmark Web site at www.lexmark .com or cont act the place where you purchased the printer. The Lexmar k Return Prog ram lets [...]
-
Seite 161
Item Regul ar ca rtri dg e Worldwide High Yiel d Toner Cartridge 600HA Ordering a maintenance kit Notes: • Using c ertai n types o f paper may req uire more frequen t rep lacement of the mai ntenanc e kit. • The separator roller, fuser , pick rollers, t ransfer roller, a nd redrive ass embly are all inc luded in th e maintenan ce kit and ca n b[...]
-
Seite 162
• High hum idity abo ve 80% • Salty a ir • Corros ive gases • Heavy dust Replacing supplies Replacing the toner cartridge 1 Pre ss the but ton on the ri ght si de of th e printe r, and t hen ope n the f ront do or. 2 Pull the tone r cartr idge out using t he handle. 3 Unpack the tone r cartri dge, an d then rem ove all pac king mat erials. [...]
-
Seite 163
4 Sha ke the ne w cartr idge to r edist ribute the ton er. 5 Insert th e ton er cartri dge into the prin ter by al igning the side rails of the cart ridg e with the ar rows on the side r ails insi de the prin ter. Warning—Pote ntial Da mage: Do not expo se the i maging u nit to di rect light for m ore than 10 minut es. Extended exposure to light [...]
-
Seite 164
Replacing the imagin g unit 1 Pre ss the but ton on the ri ght si de of th e printe r, and t hen ope n the f ront do or. 2 Pull the tone r cartr idge out using t he handle. 3 Lift the green handle, and then pull the imaging unit out of the p rinter. Maintai ning the prin ter 164[...]
-
Seite 165
4 Unpack the new imagin g unit, and then shake it. 5 Remove all pa cking ma terials from the imaging un it. Warning—Pote ntial Da mage: Do not expo se the i maging u nit to di rect light for m ore than 10 minut es. Extended exposure to light m ay cause pri nt qualit y problems. Warning—Pote ntial Da mage: Do not to uch the ph otocon ductor dr u[...]
-
Seite 166
7 Insert th e ton er cartri dge into the prin ter by al igning the side rails of the cart ridg e with the ar rows on the side r ails insi de the prin ter. 8 Clos e the front do or. Moving the printer CAUTION—PO TENTIAL IN JURY: The pr inter we ight is greater than 18 kg (40 lb) and requi res tw o or mor e trained p ersonnel to lift it safel y. Be[...]
-
Seite 167
• Use the hand holds l ocated on both s ides o f the printer to lift it. • Make s ure your fing ers are n ot under the print er when you set it down. • Before setting up the print er, make sure there is adequate clearanc e around it. Use only the power cord provided with this p roduct or t he manufacture r's authorized repl acement. Warn[...]
-
Seite 168
Managing the printer Finding adva nced networking an d administra tor information This chapt er cove rs basi c adminis trative s upport ta sks using the Embe dded Web S erver. F or more ad vanced s ystem suppor t tasks , see the Network ing Guide on th e Software and Documentat ion CD or the Embe dded Web Se rv er Administr ator's Guide on the[...]
-
Seite 169
Viewing reports You can view some repo rts from the Emb edded Web Server . These reports are usefu l for assessing the status of the printer , networ k, and su pplies. 1 Open a Web browser, and then type the print er IP address in the ad dress field. Notes: • View the printer IP address in the TCP/IP sect ion in t he Network/Por ts men u. The IP [...]
-
Seite 170
Notification Description Non Continuable Stop 1,2 The printer stops pro cessing jobs when the supp ly conditi on is reached. The supply must be replaced to continue pri nting. 1 The printer generates an e-mail about the status of the supply when supply notifica tion is enabled. 2 The printer stops when some supplie s become empty to prevent damage.[...]
-
Seite 171
Clearin g jams By carefully select ing paper and speci alty media and loa ding it properly , you sh ould be able to avoid most j ams. If j ams occur, then follow t he step s outl ined i n this cha pter. Warn ing— Potent ial D amag e: Never us e any tool to remove a jam. Doing so could per manently damage th e fuser. Avoiding jam s Load paper prop[...]
-
Seite 172
• Make sure the guides in t he tray or the multipurpose feeder are prop erly positioned and are not press ing tightly agains t the p aper or en velope s. • Push th e tray firm ly into the prin ter aft er loadi ng pape r. Use recommended paper • Use onl y recommen ded paper or specialty med ia. • Do not lo ad wrinkled , creased, da mp, bent,[...]
-
Seite 173
1 2 3 4 5 6 7 Jam ac cess ar ea Printer control panel message What to do 1 Automatic document feeder (ADF) [x] ‑ page jam, open automatic feeder top co ver. [28y.x x] Remove all paper f rom the ADF tray, and then remove the jammed paper. 2 Standard b in [x] ‑ page jam, c lear standard bin. [2 0y. xx] Remove the jammed paper. 3 Front door [x] ?[...]
-
Seite 174
[x] ‑ page jam, op en front do or. [ 20y.xx] CAUTION —HOT SURFA CE: The inside of the prin ter might be hot. To r educe the risk of i njury from a hot component, allow the s urface to cool before touching it. 1 Pre ss the but ton on the ri ght si de of th e printe r, and t hen ope n the f ront do or. 2 Pull the tone r cartr idge out using t he [...]
-
Seite 175
3 Lift the green handle, and then pull the imaging unit out of the p rinter. Warning—Pote ntial Da mage: Do not touch the shin y blue photocondu ctor drum und er the imag ing unit. Doing so may aff ect the qua lity of future pr int jobs. 4 Place th e imaging uni t aside on a flat, smooth surface. Warning—Pote ntial Da mage: Do not expo se the i[...]
-
Seite 176
Note: M ake sure all paper fragments ar e removed. 7 Inser t the im aging uni t by ali gning th e arrows on the si de rail s of the unit with the ar rows on the side rails in side the p rinter, a nd then insert the ima ging unit into th e prin ter. 8 Insert the to ner cartridge by aligning the side r ails of the ca rtridg e with the ar rows on t he[...]
-
Seite 177
9 Clos e the front do or. 10 From the pri nter contro l pane l, touc h to clear the me ssage a nd cont inue p rinting . For non ‑ touch ‑ screen p rinter model s, s elect Ne xt > > Cle ar the j am, p ress OK > . [x] ‑ page jam, open rear door. [ 20y.xx] 1 Open the front d oor to loosen t he jammed paper in t he rear door. 2 Gently p [...]
-
Seite 178
4 Close the rear door, and then the front door. 5 From the pri nter contro l pane l, touc h to clear the me ssage a nd cont inue p rinting . For non ‑ touch ‑ screen p rinter model s, s elect Ne xt > > Cle ar the j am, p ress OK > . [x] ‑ page jam, clear s tandard bin . [20y.xx] 1 Firmly gr asp the ja mmed pape r on eac h side, and t[...]
-
Seite 179
[x] ‑ page jam, remove tray 1 to clear duplex. [23y.xx] CAUTION —HOT SURFA CE: The inside of the prin ter might be hot. To r educe the risk of i njury from a hot component, allow the s urface to cool before touching it. 1 Pul l the tray compl etely o ut of the print er. 2 Locate t he blue l ever, and the n pull it do wn to relea se the jam. 3 F[...]
-
Seite 180
4 Ins ert the tra y. 5 From the pri nter contro l pane l, touc h to clear the me ssage a nd cont inue p rinting . For non ‑ touch ‑ screen p rinter model s, s elect Ne xt > > Cle ar the j am, p ress OK > . [x] ‑ page jam, open tray [x]. [24y.xx] 1 Pul l the tray compl etely o ut of the print er. Note: The message on the printer displ[...]
-
Seite 181
3 Ins ert the tra y. 4 From the pri nter contro l pane l, touc h to clear the me ssage a nd cont inue p rinting . For non ‑ touch ‑ screen p rinter model s, s elect Ne xt > > Cle ar the j am, p ress OK > . [x] ‑ page jam, clear ma nual feeder. [25y.xx] 1 From th e multi purpose feeder, fir mly grasp the jamm ed paper o n each side, a[...]
-
Seite 182
3 Reload paper into the mul tipurpo se feeder. Note: M ake sure the p aper guid e ligh tly rest s again st the edge of the pa per. 4 From the pri nter contro l pane l, touc h to clear the me ssage a nd cont inue p rinting . For non ‑ touch ‑ screen p rinter model s, s elect Ne xt > > Cle ar the j am, p ress OK > . [x] ‑ page jam, ope[...]
-
Seite 183
5 Strai ghten the edges of the or iginal doc uments, then loa d the origin al document s into the AD F, and then adjust the paper gu ide. 6 From the pri nter contro l pane l, touc h to clear the me ssage a nd cont inue p rinting . For non ‑ touch ‑ screen p rinter model s, s elect Ne xt > > Cle ar the j am, p ress OK > . Clearing jams [...]
-
Seite 184
Troubleshooting Understanding printer m essages Cartridge low [88.xy] You m ay nee d to o rder a ton er car tridge . If nece ssary , sele ct C ontin ue on the printer control panel t o clear t he mes sage and cont inue print ing. For non ‑ touch ‑ screen p rinter mo dels, pr ess to confirm . Cartridge nearly low [88.xy] If nec essary, select Co[...]
-
Seite 185
Change [paper so urce] to [paper size] l oad [orientation] Try on e or m ore of t he follo wing: • Load th e correct paper si ze and type in the t ray, veri fy the pape r size an d type s ettings are specif ied in the P aper menu on the printer control pa nel, and the n select Fi nished changing p aper . Fo r non ‑ touch ‑ screen printe r mod[...]
-
Seite 186
Defect ive f lash dete cted [5 1] Try on e or m ore of t he follo wing: • Replace the defective flash memory card. • From th e printer con trol panel, s elect Co ntinu e to igno re the m essage a nd contin ue printi ng. F or non ‑ to uch ‑ screen printer models, press to co nfirm. • Cancel the curr ent prin t job. Error reading USB driv e[...]
-
Seite 187
Fax Station Nu mber not set up. Contact system admi nistrator. Try either of the following: • From the print er cont rol pan el, sel ect Cont inu e to clear the mess age. For non ‑ touc h ‑ screen print er models, press to con fir m. • Complet e the Analo g Fax Setu p. If the m essage a ppears ag ain after co mpleti ng the setu p, then cont[...]
-
Seite 188
Insuffic ient memory for Flash Me mory Defrag ment operation [37] Try on e or m ore of t he follo wing: • From the print er cont rol pan el, sel ect Cont inu e to stop t he defrag mentatio n and con tinue pr inting. For non ‑ touch ‑ scre en printer mo dels, pres s to co nfirm. • Dele te font s, mac ros, and other data f rom the p rinter me[...]
-
Seite 189
Load manual feeder with [custom type n ame] [paper orientation] Try on e or m ore of t he follo wing: • Load th e multi purpose feeder wit h the corr ect si ze and type o f paper. • Dependi ng on your printer m odel, touch Cont inue or press to cle ar the m essage and continue print ing. Note: If n o paper is loaded in the feede r when Continue[...]
-
Seite 190
Load [paper so urce] with [custom type name] [paper orien tation] Try on e or m ore of t he follo wing: • Load the tray or feeder with the corr ect size and type of pap er. • To use the tray that has the correct size or type of paper, sele ct Fini shed lo ading pape r on the printer co ntrol p anel. For no n ‑ touch ‑ screen pr inter mode l[...]
-
Seite 191
Mainte nance kit nea rly low [80. xy] For mor e informa tion , visit t he Lexmark suppo rt Web si te at ht tp://s uppo rt.le xmark .com or contact cus tomer s upport, and then report the mes sage. If nec essary, select Conti nue to clear th e mes sage and co ntinue printin g. For non ‑ tou ch ‑ screen pr inter mo dels, press to confirm . Mainte[...]
-
Seite 192
• Update the network f irmwar e in the p rinte r or prin t ser ver. Fo r more informat ion, vi sit th e Lexmar k suppor t Web site at htt p:/ /sup port. lexma rk.co m . No analog phone li ne connected to modem , fax is disable d. Connect t he printer to an analo g phone l ine. Non ‑ Lexmark [supply type], s ee User’s Guid e [33.xy] Note: The [...]
-
Seite 193
For more in formation , visit http:/ /support .lexma rk.com or cont act cust omer su pport. Reinstall missing or un responsiv e cartridge [31.xy ] Try on e or m ore of t he follo wing: • Check if the ton er cartr idge is mi ssing. If missing , install th e toner ca rtrid ge. For i nformat ion on in stalling the car tridg e, see the “Repl acing [...]
-
Seite 194
Note: If you do not have a replacement cartridge, then see t he “Ordering supplies” section o f the User’s Guid e or visit www.le xmark. com . Replace cartridge, printer region mismatch [42.xy] Install a toner c artridg e that m atches the reg ion num ber of the printer . x indicates the value of t he printer reg ion. y indica tes the value o[...]
-
Seite 195
Replace jammed ori ginals if restarting job. From the printe r con trol pane l, try on e or m ore of the followin g: • Select Canc el job to clear the message and cancel the scan job. For non ‑ touch ‑ screen printer mod els, press to confi rm. • Select Scan fr om automatic feeder to conti nue sca nning fro m the ADF i mmediate ly after t h[...]
-
Seite 196
Scan ner dis abled. Cont act sy stem admin istrat or if pro ble m persi sts. [ 840 .02] From the printe r con trol pane l, try on e or m ore of the followin g: • Select Contin ue with s canne r disable d to ret urn to the home screen, and then contact yo ur system sup port person . • Select Re boot an d aut omatically enab le sc anner t o cance[...]
-
Seite 197
Standard USB port disabled [56] From the printer contro l panel, select C ontin ue to clear the mess age. For non ‑ touch ‑ screen pr inter mode ls, press to con firm. Notes: • The pri nter dis cards any dat a recei ved thro ugh th e USB port . • Make su re the U SB Buf fer men u is not s et to Dis abled . Supp ly nee ded to complete jo b D[...]
-
Seite 198
Weblink se rver not set up. Contact sy stem administrator. Select Continu e to clear the message. Fo r non ‑ touch ‑ screen print er models, pres s to confirm . Note: If the me ssage appea rs agai n, then con tact your system s upport p erson . Solving printer problems • “Basic print er problems” on page 198 • “Hardw are and in tern a[...]
-
Seite 199
Action Yes No Step 5 Check if the cables connecting the printer and the computer are inserted in the correc t ports. Are the cables ins erted in the co rrect ports? Go to step 6. Make sure to match the following : • The USB sym bol on the cable with the USB symbol on the printer • The appropriate Ethernet cable with the Ethernet port Step 6 Mak[...]
-
Seite 200
Printer display is blank Action Yes No Step 1 Press the Sleep button on the printer co ntrol panel. Does Ready appear on the printer displ ay? The p rob lem is s olve d. Go to st ep 2. Step 2 Turn off the printer, then wait for about 10 seconds, and then turn the printer back on. Do Please wait and Ready appear on the printer display ? The pr ob le[...]
-
Seite 201
Action Yes No Step 4 a Check if the internal opti on is selected. It may be necessary to manuall y add the internal option in the pri nter driver to make it avai lable for print job s. For more informa tion, see “Updating availabl e options in the printer driver” on page 24. b Resend the print job. Does the i nternal option operate cor rectly? [...]
-
Seite 202
Paper feed problems Jammed pages are not reprinted Action Yes No a Turn on jam recovery. 1 From the printer control pan el, navigate to: Settings > General Settings > Print R ecovery > Ja m Recovery 2 Selec t On or Auto . 3 Depending on your printer model, press or touch Su bmi t . b Resend the pages that did not prin t. Were the ja mmed p[...]
-
Seite 203
Paper jam m essage rema ins after ja m is cle ared Action Yes No a Do either of the following: • For touc h ‑ screen printer models, touch or Done . • For non ‑ to uc h ‑ screen printer models, select Next > > Clear the jam, press OK > . b Follow the instructions on the pr inter display. Does the paper jam message remain? Contact[...]
-
Seite 204
Action Yes No Step 2 a From the Paper menu on the prin ter control panel, set the paper size and type to match the paper loaded i n the tray. b Resend the print job. Did the job print from the correc t tray or on the correct paper? The p rob lem is s olve d. Go to st ep 3. Step 3 a Depending o n your operating system, open Pri nting Preference s or[...]
-
Seite 205
Multiple ‑ language PDF files do not print Action Yes No Step 1 a Check if the print options for the PDF output are set to embed all fonts. For more information , see the docum entation that c ame with Adobe Acrob at. b Generate a new PDF file, and then resend the print job. Do the fi les print? The p rob lem is s olve d. Go to st ep 2. Step 2 a [...]
-
Seite 206
Action Yes No Step 4 a Check if the ports (USB, ser ial, or Ethernet) are working and if the cables are securel y connected to the computer and the printer. Note: For more inform ation, see the setup documentation that came with the printer. b Resend the print job. Do the jobs print? The p rob lem is s olve d. Go to st ep 5. Step 5 a Turn off the p[...]
-
Seite 207
Action Yes No Step 3 a Remove held jobs stored in the printer memory. b Resend the print job. Did the job print? The p rob lem is s olve d. Go to st ep 4. Step 4 a Disable the Pa ge Prot ect feature. From the printer control pa nel, navigate to: Settings > Gen eral S ett ings > Print Recove ry > Page Protect > Off b Resend the print job[...]
-
Seite 208
Tray linking does not work Notes: • The trays can detec t paper l ength. • The multipurpose feeder does not automat ically detect the paper size. You must s et the size from the Paper Size/Type m enu. Action Yes No Step 1 a Open the trays, and then check if they contain p aper of the same size and type. • Check if the paper g uides are in the[...]
-
Seite 209
Print qual ity probl ems Char acter s ha ve jag g ed or uneven edges Action Yes No Step 1 a Print a font sample list to check if the fonts you are using are supported by the printer. 1 From the printer control pan el, navigate to: Menus > Reports > Print Fonts 2 Selec t PCL Fonts or PostScri pt Fonts . b Resend the print job. Are you using fo[...]
-
Seite 210
Action Yes No Step 2 From the printer cont rol panel, set th e paper size and type in th e Paper menu to match the paper loaded in the tray. Do the paper size and type match th e paper loaded in the tray? Go to step 3. Do one or more of the following : • Specify the paper size from the tray settings to match the paper loaded in the tray. • Chan[...]
-
Seite 211
Action Yes No Step 2 a Replace the fuser. For more information on installin g the fuser, see the instruction sheet that came with t he part. b Resend the print job. Do compressed images still appear? The pr oble m is so lve d. Con tact custome r support . Gray background o n prints ABCDE ABCDE ABCDE Leading edge Trailing edge Action Yes No Step 1 a[...]
-
Seite 212
Horizontal voids appear on prints Leading edge Trailing edge Action Yes No Step 1 a Make sure your sof tware program is using a correct fill pattern. b Resend the print job. Do horizontal voids app ear on prints? Go t o st ep 2. The p rob lem is s olve d. Step 2 a Load the specifie d tray or feeder with a rec ommended type of paper. b Resend the pr[...]
-
Seite 213
Incorrect margins on prints ABCD ABCD ABCD Action Yes No Step 1 a Move the width and lengt h guides in the tray to the correct positi ons for the paper size loaded. b Resend the print job. Are the margins co rrect? The p rob lem is s olve d. Go to st ep 2. Step 2 From the printer cont rol panel, set the paper size in the Pap er menu to match the pa[...]
-
Seite 214
Paper curl Action Yes No Step 1 Move the width and length guides in the tray to the correct position s for the size of the paper loaded. Are the width and length guides positi oned correctly? Go to step 2. Adjust the width and length guide s. Step 2 From the printer control panel, set th e paper type and weight in the Paper menu to match the paper [...]
-
Seite 215
Action Yes No Step 1 a Move the width and lengt h guides in the tray to the correct positi ons for the size of the paper loaded in the tray. b Resend the print job. Do print irr egularitie s still appear? Go t o st ep 2. The p rob lem is s olve d. Step 2 From the printer cont rol panel, set th e paper size and type in th e Paper menu to match the p[...]
-
Seite 216
Print is too dark Action Yes No Step 1 a From the Quality menu o n the printer con trol panel, r educe the toner darkness. Note: 8 is th e factory default setting. b Resend the print job. Is the print still too dar k? Go t o st ep 2. The p rob lem is s olve d. Step 2 a From the p rinter control p anel, se t the pap er type, texture and weight in th[...]
-
Seite 217
Action Yes No Step 5 a Load paper from a fresh pac kage. Note: Paper absorbs moisture due to high humidity. Store p aper in its original wrap per until you use it. b Resend the print job. Is the print still too dar k? Go t o st ep 6. The p rob lem is s olve d. Step 6 Replace the imaging unit , and then resend the print job. Is the print still too d[...]
-
Seite 218
Action Yes No Step 4 Make sure that the paper has no texture or roug h finishes. Are you printing on textur ed or rough paper? From the printer control panel, cha nge the texture settings in the Paper Text ure menu to match the paper you are printing on. Go to step 5. Step 5 a Load paper from a fresh pac kage. Note: Paper absorbs moisture due to hi[...]
-
Seite 219
Action Yes No Step 1 a Check if there is packing materia l left on the imaging unit. 1 Remove the toner car tridge, and then the imaging unit. 2 Check if the packi ng material is prope rly removed from th e imaging unit. Warn ing—P oten tia l Damag e: Do n ot expose the imaging unit to direct light for mor e than 10 minutes. Extended exposure to [...]
-
Seite 220
Action Yes No Step 1 a Rein sta ll the imag ing un it. 1 Remove the toner car tridge, and then the imaging unit. Warn ing—P oten tia l Damag e: Do n ot expose the imaging unit to direct light for mor e than 10 minutes. Extended exposure to light may cause print quali ty problems. 2 Install the imag ing unit, and then the cartri dge. b Resend the [...]
-
Seite 221
Shadow images appear on prin ts ABCD ABCD ABCD ABCD Leading edge Trailing edge Action Yes No Step 1 Load paper with the corr ect paper type and weight in the tray. Is paper with the correct pap er type and weight loaded in the tray? Go to step 2. Load paper with the correct paper type and weight in the tray. Step 2 From the printer control panel, s[...]
-
Seite 222
Action Yes No Step 1 a Move the width and lengt h guides in the tray to the correct positi ons for the size of the paper loaded. b Resend the print job. Is the print still skewed? Go t o st ep 2. The p rob lem is s olve d. Step 2 a Check if you are print ing on a paper that is supported by the tray. b Resend the print job. Is the print still skewed[...]
-
Seite 223
Action Yes No Step 4 a Rein sta ll the imag ing un it. 1 Remove the toner car tridge, and then the imaging unit. Warn ing—P oten tia l Damag e: Do n ot expose the imaging unit to direct light for mor e than 10 minutes. Extended exposure to light may cause print quali ty problems. 2 Install the imag ing unit, and then the cartri dge. b Resend the [...]
-
Seite 224
Action Yes No Step 3 a Load paper from a fresh pac kage. Note: Paper absorbs moisture due to high humidity. Store p aper in its original wrap per until you use it. b Resend the print job. Do streaked vertical li nes appear on prints? Go t o st ep 4. The p rob lem is s olve d. Step 4 a Rein sta ll the imag ing un it. 1 Remove the toner car tridge, a[...]
-
Seite 225
Toner rubs off Leading edge Trailing edge ABC DEF Action Yes No Step 1 From the Paper menu on the pri nter control panel, check th e paper type and weight. Do the paper type and texture match the paper load ed in the tray? Go to step 2. Specify the paper type and weight from the tray settings to ma tch the paper loaded in the tray. Step 2 Check if [...]
-
Seite 226
Uneven print density Action Yes No Replace the imaging unit , and then resend the print job. Is the print density uneven? Contact customer support . The pr ob lem is s olve d. Vertical voids appear on prints Leading edge Trailing edge Action Yes No Step 1 a Make sure your sof tware program is using a correct fill pattern. b Resend the print job. Do[...]
-
Seite 227
Action Yes No Step 4 a Redistribute the toner in the imaging unit. 1 Remove the toner car tridge, and then the imaging unit. 2 Firmly shake the imaging uni t. Warn ing—P oten tia l Damag e: Do n ot expose the imaging unit to direct light for mor e than 10 minutes. Extended exposure to light may cause print quali ty problems. 3 Reinstall the imagi[...]
-
Seite 228
Scanner un it does not close Action Yes No Check if there are no obstructi ons between the scanner unit and the printer. a Lift the scanner unit. b Remove any obstruction tha t keeps the scanner unit open. c Lower the scanner unit. Did the scanner unit cl ose properly? The pr oble m is so lve d. Con tact custome r support . Poor copy quality Action[...]
-
Seite 229
Action Yes No Step 6 Check the copy settin gs. From the Copy screen, check if the Content Type and Content Source settings are correct for the doc ument being scanned. Are the Content Type and Content Source settin gs correct for the document being scanned? Go to step 7. Change the Content Type and Content Source settings to match the document bein[...]
-
Seite 230
Action Yes No Step 2 Check if the paper size setting matches the size of the paper loaded in the tray. From the Paper menu on the prin ter control panel, check th e Paper Size se tting . Does the paper size setting match the size of the paper loaded in the tray. Go to step 3. Change the paper size setting to match the paper loaded in the tray, or l[...]
-
Seite 231
Action Yes No a From the printer control pa nel, navigate to: > Settings > > General Settings > > Run initial setup > > b Tur n o ff the pri nte r, and t hen tu rn it ba c k on. The “Select your language” screen a ppears on the printer display. c Select a language, and then press . d Select a country or region, and then pre[...]
-
Seite 232
Cann ot se nd or receive a fax Action Yes No Step 1 Check if an error or status message appears on the display. Is there an error or sta tus message on the display? Clear the erro r or status message. Go to step 2. Step 2 Check if the power cord is plugg ed into the printer and a proper ly grounded electrical outlet. Is the power cord plugge d into[...]
-
Seite 233
Action Yes No Step 6 Check if the print er is connected to an anal og phone service or the correc t digital connec tor. The fax modem is an analog device . Certain devices can be connected to the printer so that digi tal telephone services can be used. • If you are using an ISDN t elephone service, then connect the printer to an analog telephone [...]
-
Seite 234
Action Yes No Step 10 a Temporarily disable voice mail servi ce. For more i nformation, contact your telephone company. Note: If you want to u se both voice mail and the printer, then consider addi ng a second te lephone line for the printer. b Try sending or rec eiving a fax. Can you send or receive a fax? The p rob lem is s olve d. Go to st ep 11[...]
-
Seite 235
Action Yes No Step 3 Replace the toner c artridge. For mo re information, se e the instruction sheet that came with the supply. Can you receive faxes? The pr oble m is so lve d. Con tact custome r support . Can rece ive but no t send faxes Action Yes No Step 1 Check if the pri nter is in Fax mod e. From the printer control pa nel, press Fa x to put[...]
-
Seite 236
Recei ved fax has po or print quali ty Action Yes No Step 1 Ask the person who sen t you the fax to: a Check if the quality of the orig inal document is satisfactor y. b Increase the fax scan resolution, if possible. c Resend the fax. There ma y have been a problem with the quality of the telephone line connection. Is the fax print quality satisfa [...]
-
Seite 237
• “Scanning takes too long or freeze s the computer” on page 238 • “Poor s canne d im age q uali ty” on page 239 • “Parti al docum ent or photo sc ans” on page 240 The scanner do es not respond Action Yes No Step 1 Check if the printer is turn ed on. Is the printer turned on? Go to step 2. Turn on the printer. Step 2 Check if the [...]
-
Seite 238
Scan job was n ot successfu l Action Yes No Step 1 Check the cable connections. Make sure the Ethe rnet or USB cable i s securely connec ted to the computer and the pr inter. Are the cables securely connected? Go to step 2. Connect the cables properly. Step 2 Check if the file name is already in use. Is the file name already in use? Change the fi l[...]
-
Seite 239
Action Yes No Step 2 Select a lower scan resolution. Does scanning still take too long o r freeze the computer? Contact customer support . The pr ob lem is s olve d. Poor scanne d image quali ty Action Yes No Step 1 Check if an error message appears on the display. Is there an error message o n the printer display? Clear the erro r message. Go to s[...]
-
Seite 240
Action Yes No Step 7 Increase the scan resolution settings for a higher ‑ quality output. Did the increased resolution produ ce a higher ‑ quality output? Problem solved. Contact customer support . Partial document or ph oto scans Action Yes No Check the placement of the document or photo. Make sure the document or ph oto is loaded facedown on [...]
-
Seite 241
Action Yes No Step 3 Check if the network is working. a Print a network setu p page. b Check the first section of the n etwork setup page and confirm that the status is Connected. Note: If the status is Not Connected, then the connection may be intermittent, or the network cabl e may be defective. Contact your system support person for a soluti on,[...]
-
Seite 242
Live c hat You can chat directly with a service representative. Th ey can work with you to solve your printer probl em or provide assistance through Assisted Service where the service representative ca n remotely connect to your computer through the Internet to trou bleshoot proble ms, install updat es, or complete other tasks to help you successfu[...]
-
Seite 243
Notices Prod uct i nfor mat ion Produc t name: Lexmark MX310dn Machin e type: 7015 Mode l(s): 270 Edition notice May 2013 The foll owing p aragraph does not ap ply to any coun try whe re su ch provisio ns are incon sistent with l ocal law : LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHE R EXPR[...]
-
Seite 244
Licensing noti ces All li cens ing noti ces ass ociat ed with th is prod uct can be viewed from the ro ot directo ry of the in stall ation so ftware CD. Trademarks Lexmark, Lexmar k with diam ond design , and Ma rkVision ar e trademarks of Lexmark Int ernational, Inc., regist ered in the United St ates and/or other countries. Mac and the Mac logo a[...]
-
Seite 245
Noise emission levels The following measuremen ts were made in acc ordance with ISO 7779 and reported in conform ance with ISO 9296. Note: Some modes may not ap ply to your p roduct. 1-meter average sound pressure, dBA Printing 5 2 dBA Scanning 45 dBA Copying 54 dBA Read y N/A Values are subject t o change. See www .lexmark .com for curren t values[...]
-
Seite 246
Static sensitivity notice This s ymbol i dentifi es stat ic-sens itive parts. Do not touch in the area s near these symbols without firs t touchin g the metal frame o f the pr inter. ENERGY STAR Any Lex mark pr oduct bea ring the ENER GY STAR e mblem o n the prod uct or on a star t-up scr een is c ertifi ed to c omply with Env ironmental Protec tio[...]
-
Seite 247
DANGER - Invisible l aser radiation wh en cartridges are r emoved and interlock defeated. Avoid e xposure to laser b eam. PERIGO - Radi ação a laser invisível se rá liberada se os cartuch os forem removidos e o lacre rompido. Evite a exposição aos feix es de laser. Opasnost - Ne vidljivo lasersko zr a č enje kada su kasete uklonjene i poniš[...]
-
Seite 248
Sleep Mode This product is design ed with an energy-saving mode called Sleep Mo de . The Sleep Mode saves energy by lo wering power co nsumpti on duri ng exte nded per iods of inact ivity. Th e Sleep M ode is aut omatic ally eng aged af ter this product is not used for a sp ecified period of time, called the Sleep Mode Timeout . Factory default Sle[...]
-
Seite 249
日本の VCCI 規定 製品にこのマーク が表示されている場合、次の要件を満たし ています。 この装置は、クラス B 情報技術装置です。この装置は 、家庭環境で使用することを目的としていま すが、この 装置がラジオやテレビジョン受信機に近接して使用される?[...]
-
Seite 250
after July 23, 2001, the REN for this product is part of the product i dentifier that has the format US:AAAEQ##TXXXX. The digits re presented b y ## are th e REN without a decimal poin t (for example, 03 is a REN of 0.3). For earl ier products , the REN is shown separately on the label. If this e quipment cau ses harm to the tel ephone network, t h[...]
-
Seite 251
the countr y/region of use. Th is is to av oid dama ge to the equipmen t caused by lo cal light ning strike s and ot her elect rical surges. This equipment uses CA11A telephon e jacks. Avis réservé aux utilis ateurs du r éseau téléphonique du Canada Ce produi t est confo rme aux spéc ificati ons techn iques d’I ndustrie Canada. Le nu méro [...]
-
Seite 252
Lexmark Intern ational, Inc. LEX-M0 3-002 A11- 0160001 JP Using this p roduct in Switzerland This pro duct requir es a Swis s billin g tone filt er (Lexmark pa rt number 80D1877) t o be installed on any lin e which rece ives meter ing pulses in Switzer land. The filter mu st be used, as meter ing pul ses are pr esent on al l analog telephon e lines[...]
-
Seite 253
Complian ce is indicated by the CE marking. The manufa cturer of t his prod uct is: Lexmark Inter national, I nc., 740 W est Ne w Circle Road , Lexington, K Y, 40550 USA. The authorized representat ive is: Lexmark International Te chnolo gy Hu ngá ria Kf t., 8 L ech ner Ödö n f asor , Mill enni um Tower III, 1095 Budapest HUNGARY, A declar ation[...]
-
Seite 254
To prevent radio in terference to th e licensed service, this device is intend ed to be operated indoo rs and away from windows t o provide m aximum shieldi ng. Equip ment (or its transmit antenna ) that is installed ou tdoors is subject to licensing . The inst aller of thi s radio equi pment must ensure that the a ntenna is lo cated or point ed su[...]
-
Seite 255
Complian ce is indicated by the CE marking. The manufa cturer of t his prod uct is: Lexmark Inter national, I nc., 740 W est Ne w Circle Road , Lexington, K Y, 40550 USA. The authorized representat ive is: Lexmark International Te chnolo gy Hu ngá ria Kf t., 8 L ech ner Ödö n f asor , Mill enni um Tower III, 1095 Budapest HUNGARY, A declar ation[...]
-
Seite 256
Español Por medio de la presente, Lexmark International , Inc. dec lara que e ste produ c to cumple con los requ isitos esenciales y cuales quiera ot ras disposicio nes aplica bles o exig ibles de la D irectiva 1999/5 /CE. Eesti Käe solevaga kinnit ab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/ EÜ põhinõuet ele j [...]
-
Seite 257
The use of th is product or ser vice is subject to th e reason able, non-di scrimin atory t erms in the Intelle ctual Pro perty Rights (IPR) Di sclosur e of Ce rticom Co rp. at th e IETF fo r TL S Suite B Profile for Tr anspor t Laye r Securi ty (T LS) im plement ed in th e product or serv ice. The use of th is product or ser vice is subject to th [...]
-
Seite 258
Limited warranty service The warrant y period s tarts on t he date o f origina l purchase as show n on the pur chase re ceipt and ends 12 months la ter provided that t he warranty period for any s upplies and for any maintenan ce items included with the printer s hall end earlier if it, or its original contents, are substant ially used up, depleted[...]
-
Seite 259
MERCHAN TABILITY , FITNE SS FOR A PARTIC ULAR PURP OSE, AN D SATISFA CTORY Q UALITY. ANY WARR ANTIES THAT MAY NOT BE D ISCLAIMED UNDE R APPLICABLE L AW ARE LIMITED IN DU RATION T O THE WARRANTY PERI OD. NO WARRANTI ES, EX PRESS OR IMPLIED, W ILL APP LY AFTER T HIS PER IOD. ALL INFO RMATION, SP ECIFI CATIONS, PRICES , AND SERV ICES ARE SUBJEC T TO C[...]
-
Seite 260
Index Numerics 250 ‑ sheet tray installi ng 19 550 ‑ sheet tray installi ng 19 Symbol s [x] ‑ page jam, clear manual feeder. [25y.xx] 181 [x] ‑ page ja m, clear s tandard bin . [20y.xx] 178 [x] ‑ page jam , open au tomatic feeder top cover. [28y.xx] 182 [x] ‑ page jam , open fron t door. [20y.xx] 174 [x] ‑ page jam, open rea r door. [[...]
-
Seite 261
Eco ‑ Mode 150 Hibernate mode 15 2 Quiet mode 150 Schedu le Power M odes 153 Sleep mode 151 conse rving suppli es 149 contact ing custo mer suppor t 241 contro l panel, printer indicato r light 1 3 Slee p button ligh t 13 contro ller boa rd access ing 15 copies copy opt ions 66 copy from copy opt ions 66 copy job canceling 6 6 copy opt ions advan[...]
-
Seite 262
Error reading USB drive. Remove USB. 186 Error reading USB hub. Remove hub. 186 Ethernet ne twork preparin g to set up for Et hernet printin g 25 Etherne t network setu p using M acintos h 25 using W indows 25 Ethernet ne tworking Maci ntosh 25 Windows 2 5 Ethernet port 22 Etherne t setup preparing for an 25 EXT ports 22 ext erior of the p rint er [...]
-
Seite 263
Imaging unit ve ry low, [ x] esti mated pages re main [84.xy] 187 Incorrect paper size, open [paper source] [34] 187 indica tor light printer control panel 13 initial fax setup 73 using t he Embedded W eb Server 73 install ing an opt ional card 17 install ing op tions order o f inst allation 18 install ing printe r on a netwo rk Ethernet netwo rkin[...]
-
Seite 264
N Network [x] menu 109 Network [x] softwa re error [54] 191 Network Card menu 110 Network Repo rts menu 1 10 netwo rk s etting s Embedded Web Serv er 168 networ k setup page printin g 30 Networking Guide where to find 168 No analog phone line connected t o modem, fax is dis abled. 192 noise emi ssion levels 245 noise , printer reduc ing 150 Non ‑[...]
-
Seite 265
print t rouble shooti ng incorrect characte rs print 2 03 incorrect margins o n prints 21 3 jammed pages are not reprint ed 202 job prin ts from wrong t ray 20 3 job prin ts on wr ong pape r 203 jobs do no t pri nt 205 Large jobs do not collate 204 multipl e ‑ languag e PDF f iles do not print 205 paper cur l 214 paper frequently ja ms 202 print [...]
-
Seite 266
Replace all o riginals if re starting job. 193 Replace cartridge, 0 estimated pages re main [88.xy] 193 Replace car tridge, print er region mismatch [42.xy] 194 Replace defective imagi ng unit [31.xy] 194 Replace imag ing unit, 0 estimated pages re main [84.xy] 194 Replace jamm ed originals if resta rting job. 195 Replace m aintenance kit, 0 estima[...]
-
Seite 267
functi ons 11 scann er glass 12 Scanner auto matic feeder c over open 195 Scanner disabled by admin [840.01] 195 Scanne r disabl ed. Contac t syste m administ rato r if prob lem persist s. [840.02] 196 scanne r glass cleaning 158 copyin g using 58 Scanner jam , remove all origi nals from the scanne r [2yy. xx] 196 Scanner j am, remove jammed origin[...]
-
Seite 268
trans paren cies copying o n 58 loading, mu ltipurpose feeder 36 tips 49 tray s linking 40 loading 31 unlink ing 40 troubl eshootin g cannot open Emb edde d Web Server 240 checking an unres ponsiv e printer 198 contact ing cus tomer supp ort 241 fax funct ion is no t set up 230 solving b asic pri nter proble ms 198 the scanne r does not res pond 23[...]
-
Seite 269
wireless setup wizard using 28 X XPS me nu 143 Index 269[...]