LG Electronics 52SX4D Bedienungsanleitung

DLP Projection TV OWNER’S MANUAL MODELS: 52SX4D / 6 2 SX4D 52SX4D-UB / 62 SX4D-UB LG Electronics U.S.A., Inc. TM R T ruSurround XT Please read this manual carefully and completely before operating your TV . Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below . See the label attache[...]

2 DLP Projection TV W ARNING/CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P AR TS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within th[...]

Owner ’s Manual 3 TV Guide On Screen Notices for U.S.A. TV Guide On Screen Notices for U.S.A. Digital Cable Compatibility Digital Cable Compatibility This digital television is capable of receiving basic analog, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming. A secu[...]

4 DLP Projection TV Safety Instructions IMPORT ANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara- tus. This information sha[...]

Owner ’s Manual 5 Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen[...]

6 DLP Projection TV Contents After reading this manual, keep it handy for future reference. W arnings /Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Digital Cable Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4~5 Introduction C[...]

Owner ’s Manual 7 Introduction Introduction Introduction[...]

8 DLP Projection TV Introduction PC/DTV (XGA/ 480p/ 720p 1080i) DVI RGB/DVI UPGRADE PORT / P R P B Y DTV/DVD RGB PC/DTV (XGA/ 480p/ 720p 1080i)[...]

Owner ’s Manual 9 Introduction LEFT/RIGHT AUDIO Used for stereo sound from vari- ous types of equipment. S-VIDEO A connection available on some very high- end equipment that provides bet- ter picture quality than video input. VIDEO Connects the video signals from any piece of equipment. Front A/V P anel S-VIDEO VIDEO FRONT A/V AUDIO (R ) (L)/ MO [...]

Introduction 10 DLP Projection TV MODE DA Y - DA Y + FLASHBK i APM CC FREEZE M/C EJECT TV INPUT TV/VIDEO V 1394 - When using the remote control, aim it at the remote control sensor on the TV . Remote Control Key Functions Remote Control Key Functions LIGHT Illuminates the remote control buttons of selected mode. DA Y+/DA Y- Moves forward or backwar[...]

Owner ’s Manual 11 Introduction • Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). • Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones. Close cover . Installing Batteries Installing Batteries MODE DA Y - DA Y + FLASHBK i APM CC FREEZE M/C[...]

12 DLP Projection TV Installation - W all Antenna Socket or Outdoor Antenna without a Cable Box Connections - For optimum picture quality , adjust antenna direction if needed. Antenna or Cable Connection Antenna or Cable Connection 1. Analog and Digital TV signals provided on antenna 2. Analog and Digital TV signals provided on cable ANTENNA[...]

Owner ’s Manual 13 Note : The TV will let you know when the TV(analog antenna), DTV(digital antenna), CA TV(analog cable) and CADTV(digital cable) channel scans are complete. • T o improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly . • If the antenna needs to be split for two TV’ s, in[...]

14 DLP Projection TV Installation • Component Input ports T o get better picture quality , connect a DVD player to the component input ports as shown below . Component ports on the TV Y P B P R Video output ports on DVD player Y Y Y Y Pb B-Y Cb P B Pr R-Y Cr P R How to connect 1. Connect the DVD video outputs (Y , P B , P R ) to the COMPO- NENT ([...]

Owner ’s Manual 15 Installation The TV has a special signal output capability which allows you to hook up a second TV or monitor . Connect the second TV or monitor to the TV’s MONIT OR OUTPUT . See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings. Note • Component, RGB-PC/RGB-DTV , [...]

16 DLP Projection TV Installation <When the PC supports DVI> How to connect 1. Connect the PC to HDMI1/DVI port of this TV with an HDMI-to-DVI cable(not supplied with this product). If you do not need to connect audio, HDMI2 port is also available for the DVI video connection. 2. If the PC(or the sound card of the PC) has a fiber optic digita[...]

Owner ’s Manual 17 Installation Send the TV’ s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2. Connect the other end of the optical cable to the digital audio (opti- cal) input on the audio equip[...]

18 DLP Projection TV Installation - HDMI TM , the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing. - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720[...]

Owner ’s Manual 19 Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Fiber Optic Digital Audio Cable (not supplied with the product) Analog Audio Cable(RCA type) (not supplied with the product) Analog Audio Cable(Stereo to RCA type) (not supplied with the product) Reference Refe[...]

20 DLP Projection TV Installation How to use 1. Connect the HDMI1/DVI Source Devices(DVD Player or Set T op Box or PC) and the TV SET . 2. T urn on the display by pressing the POWER button on the TV SET and HDMI1/DVI Source Devices remote control. 3. Select HDMI1/DVI Input source in Main Input option on the SETUP menu.(Refer to P .61) 4. Check the [...]

Owner ’s Manual 21 Installation[...]

22 DLP Projection TV Installation PC/DTV (XGA /480p /720p /1080i) S-VIDEO P R P B Y MONO CABLE RGB INPUT COMPONENT INPUT2 INPUT1 DTV/DVD INPUT RGB/DVI INPUT (L) (R) AUDIO (L) (R) AUDIO VIDEO (L) (R) AUDIO (L) (R) AUDIO MONITOR OUTPUT VIDEO INPUT2 VIDEO INPUT1 DIGITAL AUDIO OPTICAL INPUT1 (COMPONENT2) DIGITAL AUDIO OPTICAL INPUT2 (DVI) DIGITAL AUDIO[...]

Owner ’s Manual 23 Installation Note : The G-LINK cable is necessary for the TV Guide On Screen system to work with your Cable Box and VCR. See Page 21~22 for G-LINK connection instructions. The TV Guide On Screen system's Reminder Screen appears: -- after initial TV set up -- if you power Off the TV and then power it back On T o make a sele[...]

24 DLP Projection TV Installation 2. Screen 2: Enter Zip or Postal Code Option 1 • If you selected USA in Screen 1, you see the ZIP Code screen. • Y ou input numbers by either pressing the number keys on the remote or using the D / E button to display a number , and then the F / G but- ton to move to another field. • Press ENTER to display Sc[...]

Owner ’s Manual 25 Installation 6. Screen 6: Cable Box T uning Channel • Select the channel used for the cable box. • Press ENTER to display Screen 7. 7. Screen 7: Cable Box Configuration Diagram • The diagram shows the correct way to install the G-LINK Cable from the back of the device to the cable box. Make sure the G-LINK TM Cable is pro[...]

26 DLP Projection TV Installation 8. Screen 8: Cable Box Brand Name • Use the D / E button to select a cable box brand. • Press ENTER to display Screen 9. 9. Screen 9: Cable Box Preparation • Follow the on-screen instructions, and press ENTER to display Screen 10. 10. Screen 10: Cable Box Code T esting • When testing is done, Screen 1 1 dis[...]

Owner ’s Manual 27 Installation 14. Screen 14: Congratulations • Press ENTER to display Screen 15. 13. Screen 13: Are your basic settings correct? • If you select Y es, you see Screen 14. • If you select No, you see Screen 1. 12. Screen 12: Do you have an antenna connected? • If you select Y es, you see Screen 13. Note: • If you selecte[...]

28 DLP Projection TV Installation 17. Screen 17: VCR Brand Name • Use the D / E button to select the brand of the recording device. • Press ENTER , and you see Screen 18. 16. Screen 16: VCR Configuration Diagram • This screen shows the correct way to install the G-LINK TM Cable from the back of the TV to the Recording device. Make sure the G-[...]

Owner ’s Manual 29 Installation 18. Screen 18: VCR Preparation • Follow the on-screen instructions, and press ENTER to display Screen 19. 19. Screen 19: VCR Code T esting • When testing is done, Screen 20 displays automatically . 20. Screen 20: VCR T uned to Channel 9? • If you select Y es, you see Screen 21. • If you select No, a differe[...]

30 DLP Projection TV Installation 21. Screen 21: Confirming Y our Settings • V erify the Setup information is correct. • If it is, select Y es, end setup, and you see Screen 22. • If it is not, select No, repeat setup process, and you see Screen 1. 22. Screen 22: Congratulations • Y ou have successfully completed Setup! • Press ENTER and [...]

Owner ’s Manual 31 Operation - It's available to communicate to either direction and you can give and take a image, sound, or each control command with one cable. W W How to connect the 1394 • T o operate the IEEE1394, these methods are available as shown below . 1. When connecting the DVHS or the MicroMV Camcorder , as shown in the (a) or[...]

32 DLP Projection TV Operation IEEE 1394 Functions IEEE 1394 Functions -When connecting the 1394 and then playing, you must use the original DVHS tape. If not, it may occur errors. -If the operation normally doesn’t work on Daisy Chain connection, please change an arrangement of connected device. 2. When connecting the DVHS and the MicroMV Camcor[...]

Owner ’s Manual 33 Operation DVHS DVHS W W How to play the DVHS <TV> <DVHS> 1. Connect the IEEE 1394 jack at the TV to the IEEE 1394 jack at the DVHS with IEEE 1394 Cable. 2. When watching the TV , press the button. 1394 <Connect the IEEE1394 Cable> • The control panel of DVHS -Depending on the connected equipment, marked cont[...]

34 DLP Projection TV Operation IEEE 1394 Functions IEEE 1394 Functions[...]

Owner ’s Manual 35 Operation W W How to play the MicroMV Camcorder and DVHS MicroMV Camcorder and DVHS MicroMV Camcorder and DVHS 1. Synchronously , connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the DVHS and the MicroMV Camcorder with the IEEE 1394 Cable. 2. Press the D / E button to select a device, then press ENTER button to pla[...]

36 DLP Projection TV Operation DTV Link DTV Link : DTV Link applies to 1394 connection of device labeled DTV Link logo. W W V How to play the DTV Link <DTV Link- Producer> 1. Connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the DTV Link supported device IEEE 1394 Cable. * What’s the DTV Link ? It is normal standard of CEA which[...]

Owner ’s Manual 37 Operation W W Don’t connect ! • When using one of these 2 methods, the IEEE1394 will not work properly . (a) LOOP Connection <Connect the IEEE1394 Cable> <TV> <DVHS> <MicroMV Camcorder> <Connect the IEEE1394 Cable> <Connect the IEEE1394 Cable> (b) When connecting the 4 devices and over , [...]

38 DLP Projection TV Operation - Y our new TV contains the TV Guide On Screen Interactive Program Guide. - The TV Guide On Screen system has features that help you get the most out of your viewing experience. •Three 30-minute time periods in a 16x9 aspect ratio. •Eight days of show listings (today plus seven days). •Icons that indicate show r[...]

Owner ’s Manual 39 Operation - The screens displayed in the TV Guide On Screen system share many of the same compo- nents, as shown in the following figure: • Video Window - displays TV video while the Guide is displayed •Service Bar - provides access to the 4 main Guide Services •Current Service Label - indented to indicate current Service[...]

40 DLP Projection TV Operation •A Panel Menu appears when the Menu key is pressed on a highlighted tile and additional options are available. It also appears when you press ENTER on a show starting in the future. •When a Panel Menu appears, the highlighted tile changes color to indicate the Panel Menu relates to this tile. •The Panel Menu dis[...]

Owner ’s Manual 41 Operation - Access Listings by pressing the TV Guide button on your remote or on the front panel of your TV . - Listings is always the first Service displayed in the Guide. - With Listings highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen. •View 8 days of show listing[...]

42 DLP Projection TV Operation - Search lets you find shows by category (Alphabetical, Movies, Sports, Children, Educational, News, V ariety , Series, HDTV) or b y Keyword. - With Search highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen. •Category Search Example: Movies 1. From Search, us[...]

Owner ’s Manual 43 Operation 2. Use the E button to highlight a subcategory (for example, All). 3. Press ENTER to display a list of all Movies, organized by date and time. Y ou can choose to set a recording, a reminder , or tune to the channel. 4. Highlight a show and press ENTER to watch (if on now) or the Menu key to display the Episode Options[...]

44 DLP Projection TV Operation - Keyword search lets you enter a word(s) to look for a particular show by category or for every show title that matches. • Keyword Search 1. Highlight the Keyword navigation label, and press ENTER button to display the Keyword Search menu. 2. Highlight New Search, and press ENTER button. 3. The Search Options menu [...]

Owner ’s Manual 45 Operation The Guide stores all the keywords you create. T o edit or delete a keyword, highlight the keyword and press the Menu key . A Search Options menu is displayed. Go to Service Bar - closes the menu, changes no infor- mation, and returns to the Search Service Bar . Edit Search - displays the keyboard, where you can change[...]

46 DLP Projection TV Operation - Schedule lets you review , edit, or delete Record and Remind events that you set previously . - With Schedule highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen. - An icon identifies the event type: Record W Once —records the show one time W Regularly , Dai[...]

Owner ’s Manual 47 Operation - After you complete the TV Guide On Screen system setup, you can come back and change its settings in the following areas: • Change System Settings • Change Channel Display • Change Default Options Highlight a choice, press ENTER , and follow the on-screen instruc- tions. • Change System Settings This option [...]

48 DLP Projection TV Operation Press ENTER to display the Channel Editor screen. Then, highlight a channel and press Menu. A Grid Options menu is displayed. Highlight Go Back to Setup to close the menu, change no infor- mation, and return to the Setup Service Bar . Or make changes and when finished, press ENTER to highlight Done. Press ENTER again [...]

Owner ’s Manual 49 Operation General Default Options lets you set defaults for the following: •The initial Info Box size when the TV Guide On Screen system is entered. Choices are No, Small, Large, and Last Used (Default = Last Used). •The Info Box size rotation when the Info key is pressed while in the TV Guide On Screen system. Choices are [...]

[...]

Owner ’s Manual 51 Operation W Once —records the show one time W Regularly —records the show every time the show airs on the same channel and starts at the same time W Weekly —records the show each time the show airs on the same day of the week, on the same channel and starts at the same time W Off (not cancel) —keeps the show in the list[...]

52 DLP Projection TV Operation When finished, press ENTER to highlight Schedule Recording. Press ENTER again to close the menu. Y ou see a Record icon for the selected frequency next to the show title. Highlight Cancel to close the menu, change no information, and return to the highlighted show . 3) Manual Recording •Highlight the Schedule Servic[...]

Owner ’s Manual 53 Operation •Use the F / G buttons to choose among Once, Daily , Weekly , and Off, as follows. W Once —records the time, channel, input, recorder combi- nation one time. W Daily —records the time, channel, input, recorder combi- nation Monday through Friday . W Weekly —records the time, channel, input, recorder com- binat[...]

54 DLP Projection TV Operation Y ou can set a show Reminder in Listings, Search, and Schedule or change Reminder settings for a show in Schedule. There are 2 ways to set a show Reminder: 1) From a Panel Menu • Highlight a show , and press Menu to display the Episode Options menu. • Highlight Set Reminder , and press ENTER to display the Remind [...]

Owner ’s Manual 55 Operation 2) Manual Reminder •Highlight the Schedule Service label, and press the Menu key to display the Schedule Options menu. •Use the D / E / F / G buttons to move through the options. Use the number or D / E / F / G buttons to change the information, as necessary . •Highlight New Manual Reminder and press the ENTER k[...]

56 DLP Projection TV Operation Based on your option settings, a notification screen will appear , if your TV is On at the reminder time. Y ou can then choose to hide the reminder , or highlight the show , and press ENTER to tune to the show . If there is no activ- ity for 3 minutes, the notification screen automatically closes and completes the hig[...]

Owner ’s Manual 57 Operation Notes: • If you intend to be away on vacation, disconnect the power plug from the wall power outlet. • The TV Guide On Screen and any CableCARD TM Software upgrades work while the TV is in standby • mode. If you pull the power plug cord the TV Guide On Screen will not update its listings and no ••• • Cab[...]

58 DLP Projection TV Operation TV Setup TV Setup - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Language . 3. Press the G button and then use D / E button to select you[...]

Owner ’s Manual 59 Operation - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes. - A password is required to gain access to EZ Scan menu if the Lock System is turned on. 1. Press the MENU button and then use D /[...]

60 DLP Projection TV Operation Setup Menu Options Setup Menu Options - Create two different types of channel lists in memory: “Custom List” and “Favorite List” from the default channel list created from the EZ Scan channel search. - A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom[...]

Owner ’s Manual 61 Operation - Changes the picture source so you can watch your off-air TV , cable TV , VCR, DVD, or any other devices that are connected to your TV . 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Main Input . 3. Press the G button and then us[...]

62 DLP Projection TV Operation - Adjust the picture appearance to suit your preference and viewing situations. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select the desired picture option ( Contrast ,[...]

Owner ’s Manual 63 Operation - Other languages may be available if a digital signal is provided by the broad- casting station. 1. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below: Custom (your own settings), Normal , Stadium , News , Music and Theater . • Y ou can also adjust EZ Sound in the AUDIO menu. [...]

64 DLP Projection TV Operation 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Front Surround . 3. Press the G button and then use D / E button to select Off , 3D EchoSound System or SRS (Sound Retrieval System) TruSurround XT . • 3D EchoSound System Creates a [...]

Owner ’s Manual 65 Operation - T imer function operates only if current time has been set. - Off-T imer function overrides On-Timer function if they are both set to the same time. - The TV must be in standby mode for the On-T imer to work. - If you do not press any button within 2 hours after the TV turns on with the On T imer function, the TV wi[...]

66 DLP Projection TV Operation Auto Of Auto Of f f - If set to on and there is no input signal, the TV turns off automatically after 10 minutes. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then u s e D / E button to select Auto Off . 3. Press the G button and then u s e D / E button to selec[...]

Owner ’s Manual 67 Operation Cinema 3:2 Mode Setup Cinema 3:2 Mode Setup - Most movies are 24 frames/sec, but TV signal is 30 frames/sec. This option lets the TV do 3:2 pull-down operation for you to watch movies at the best motion appearance. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and [...]

68 DLP Projection TV Operation Caption Caption Digital Broadcasting System Captions - Choose the language you want the DTV/CADTV Captions to appear in. - Languages can be chosen for digital sources only if they are included on the program. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then u[...]

Owner ’s Manual 69 Operation Caption Option Caption Option - Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then u s e D / E button to select Caption Option . 3. Press the G button and then u s e F / G button to select Custom . 4.[...]

70 DLP Projection TV Operation Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V -Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of pr[...]

Owner ’s Manual 71 Operation Parental Lock Setup Parental Lock Setup 1. Press the MENU button and then use D / E button to select the LOCK menu. Then, press the G button • Enter the password as requested. • The TV is set up with the initial password “0-0-0-0”. 2. Use the D / E button to choose from the following Lock Menu options. Once th[...]

72 DLP Projection TV Operation Cable menu options Cable menu options - The Cable sub menu displays when inserting the CableCARD TM to the TV . - The CableCARD TM type is Motorola, Scientific Atlanta (SA), or SCM etc. The OSD (On screen display) is different from your TV according to your CableCARD TM type. Scrambled channel Scrambled channel - Inse[...]

Owner ’s Manual 73 Operation - If an emergency situation occurs while watching the TV/DTV/CA TV/CADTV , you can see a message from cable TV service provider(s). - When receiving an emergency message, the message is displayed on the screen as shown below or the channel is changed automatically to a channel that maintains the emergency message. The[...]

74 DLP Projection TV Operation - Y ou can use the JPEG and MP3 file by memorizing to Memory card in mode. Memory Card Memory Card Precaution for Using the Memory Card Precaution for Using the Memory Card Notes on Memory Card Notes on Memory Card This is a device equipment to communicate the data between A V external equipment. It’s used to a digi[...]

Owner ’s Manual 75 Operation A A vailable Memory Card vailable Memory Card Slot 2 Slot 1 A sort of file Compatilbility Photo Image (JPEG) *.jpg - Some MagicStor Plus cards are not usable. An error may occur if you use a memory card with greater than the specified capacity . Unsupported or damaged JPEG or MP3 files can cause errors. Do not try to [...]

76 DLP Projection TV Operation Notes on Memory Card Notes on Memory Card How to insert and eject the card How to insert and eject the card The JPEG Decoding/The Image Preview Supplied Spec The JPEG Decoding/The Image Preview Supplied Spec Compression Method Baseline Progressive JPEG Decoding Support Image Display Preview Image Display O X X OO Imag[...]

Owner ’s Manual 77 Operation 1. Press D / E / F / G button to select photo or music for slot1/2. 2. Press the ENTER button to enter the photo or music media. 3. Press the button to exit the mode. Notes: • The OSD of the ejected card slot is inactivated when ejecting the card with the hand. • If there is any error in a memory card, it’s impo[...]

78 DLP Projection TV Operation 1. Insert the memory card to Slot 1 and/or Slot 2 on the TV front panel. 2. Press the button. 3. Use D / E / F / G button to select photo media for slot1 or slot 2. 4. Press the ENTER button to enter the photo media. Note: It’s possible to display 15 JPEG files per page. 5. Press the D / E / F / G button to select J[...]

Owner ’s Manual 79 Operation Mark/Unmark for JPEG file Mark/Unmark for JPEG file - Y ou can mark/unmark the file to view the desired file or use slide show for desired file conveniently . - The selected file displays orange in color . When pressing the ENTER button after marking some a file, the marked file displays green in color . W W Mark/Unma[...]

80 DLP Projection TV Operation JPEG File V JPEG File V iewing Options iewing Options The Image The Image Adjustment Adjustment 1. Press the D / E / F / G button to select JPEG file and then press the ENTER button. 2. Press the D / E button to select View and then press the ENTER button The selected image will display on entire screen. 3. Adjust the[...]

Owner ’s Manual 81 Operation 1. Press the D / E / F / G button to select JPEG file and then press the ENTER button. 2. Press the D / E button to select Slide Show or Show Marked and then press the ENTER button. (If you mark the file with using MARK button, Show Marked is displayed on screen.) 3. Y ou can choose the slide show delayed time and eff[...]

82 DLP Projection TV Operation 1. In photo media, select your desired JPEG file. 2. Press the INFO button. The file information for selected JPEG file is displayed. If JPEG file has no information, you can’t check it. 3. Press the ENTER , EXIT or INFO button to return to the photo list. - Use it t o check information for selected JPEG file. 1. Us[...]

Owner ’s Manual 83 Operation Marked MP3 file number Current Playing Time/T otal Playing Time Current file number/T otal file number Using Card memory/ T otal Card memory Direct Buttons Play Delete Cancel 1. Insert the memory card into Slot 1 and/or Slot 2 on the TV front panel. 2. Press the button. 3. Use D / E / F / G button to select music medi[...]

84 DLP Projection TV Operation W W Stop Playback T o stop playback, press the A button on the remote control. T o stop playback, press the ENTER , VOL ( F / G ) , CH ( D / E ) button on the TV . Notes: • If you replay the MP3 file after stopping, the highlighted MP3 file on menu will play . • On stopping, VOL ( F / G ) and CH ( D / E ) buttons [...]

Owner ’s Manual 85 Operation • Press the , , buttons. The screen saver is released but the MP3 playback is restarted. - , : Return to a initial portion of the MP3 playback. - : Playback the next MP3. • If you press any other button, the screen saver is released and the MP3 playback is stopped. W W During playing the MP3 • Press the D / E / [...]

86 DLP Projection TV Operation MP3 File Playing Operation MP3 File Playing Operation - Use i t to check information for selected MP3 file. - It’s impossible to delete the music during playback. 1. In music media, select your desired MP3 file. 2. Press the INFO button. The file information for selected MP3 file is displayed. If MP3 file has no inf[...]

Owner ’s Manual 87 Operation - PIP lets you view 2 dif ferent inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - T win Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each source is given half the sc[...]

88 DLP Projection TV Operation In PIP mode, press the D / E / F / G button to move the sub picture to a dif ferent location on the screen. Use the D / E / F / G button to change main and sub picture sizes in T win Picture mode. If screen is adjusted to the maximal size, the large screen appears the black part at both the up and down sides. i.e) 1. [...]

Owner ’s Manual 89 Operation APM (Adaptive Picture Mode) - Allows a viewer to select their preferred picture mode after compairing the four different picture ( Daylight , Normal , Night Time - and Custom ) settings. 1. Press the APM button at once. As shown below, the screen is divided to 4-split. 2. Use the D / E / F / G button to navigate 4 EZ [...]

90 DLP Projection TV Operation 4 : 3 16 : 9 Screen Ratio of Input Signal 4:3 Screen Ratio of Input Signal 16:9 Resolution of Input Signal 720x480i Resolution of Input Signal 720x480p Resolution of Input Signal 1280x720p Resolution of Input Signal 1920x1080i Multilingual : Input Signal have over two Audio infor- mation. Press the SAP button to selec[...]

Owner ’s Manual 91 Operation 1. Press the FREEZE button in DTV 720p, or 1080i modes. 2. Use the D / E / F / G buttons to select the screen split zoom section. 3. T o return to normal viewing, press the FREEZE button a g ain. - Enlarges the picture with correct proportions. - When enlarging the picture, the image may become distorted. - If you set[...]

92 DLP Projection TV Operation Close POSITION G SIZE PHASE RESET Adjust D F G E Previous POSITION SIZE PHASE RESET Adjust Close POSITION SIZE G PHASE RESET Adjust D F G E Previous POSITION SIZE PHASE RESET Adjust D F G E Previous POSITION SIZE PHASE RESET Adjust Initialize Settings No Yes Control Move Select F G F G Move Phase 0 F G • When RGB co[...]

Owner ’s Manual 93 Programming the Remote G The remote is a multi-brand or a universal remote . It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode Programming a code into a remote mode Programming the Remote[...]

94 DLP Projection TV Programming Codes Programming Codes Programming Codes VCRs VCRs CA CA TV TV AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MA THES 031 033 041 DAEWOO 005 007 010 064 0 6 5 10 8 11 0 111 11 2 11 6 117 11[...]

Owner ’s Manual 95 Programming Codes Audio Audio APEX DIGIT AL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNA VOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 017 P ANASONIC 003 009 PHILIPS 013 PIONEER 004 026 PROCEED 021 PROSCAN 005 006 RCA 005 006 SAMSUNG 01 1 015 SONY 007 THOMPSON 005 006 TOSHIBA 019 008 Y [...]

96 DLP Projection TV T roubleshooting Checklist No picture & No sound • Check whether the TV is turned on. • Is the power cord inserted into wall power outlet? • T est the wall power outlet, plug another product’s power cord into the outlet where the TV’ s power cord was plugged in. No or poor color or poor picture • Select Color in[...]

Owner ’s Manual 97 T roubleshooting Checklist Poor TV input signal • Check ANTENNA and CABLE connection. No channel or a few channel • Start EZ Scan. Poor Video signal • Check ANTENNA and CABLE connection. Unsuitable Aspect Ratio • Y ou can adjust the RA TIO button or Aspect Ratio in the OPTION menu. No output from one of the speakers •[...]

98 DLP Projection TV T roubleshooting Checklist T T roubleshooting Checklist roubleshooting Checklist I set a show to Auto-T une and it did not. • Check the Schedule menu and verify that the show is listed as a Reminder . • Highlight the show under Listings and do the following: W Press the Menu key on the remote. W Use the down arrow to highli[...]

Owner ’s Manual 99 Maintenance 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’ s almost dry , and then use it to wipe the screen. 2. Make sure the excess water is off the screen, and then let it[...]

100 DLP Projection TV Product Specification • The specifications shown above may be changed without prior notice for quality improvement. Product Specifications Product Specifications MODEL Horizontal Size (inches) Height (inches) Depth (inches) Weight (lbs.) Power requirement T elevision System Program Coverage Power Consumption (W) Antenna Audi[...]

Owner ’s Manual 101 Notes Notes[...]

102 DLP Projection TV Notes Notes[...]

LG®Brand Customer Interactive Center P . O. Box 240007 201 James Record Road Huntsville, Alabama 35824 A TTN: CIC T elephone number: 1-800-243-0000 This number is a toll-free number Follow menu prompts when the call is answered Web address: www .lgservice.com T elephone Center Hours of Operation: 24 hours a day , 365 days per year Service for your[...]

P/N : 3828V A0540A (3828VB0002M) Y our LG® brand DLP Rear Projection T elevision will be repaired or replaced as set forth below , if it proves to be defec- tive in material or workmanship under normal use, during the warranty period ("W arranty Period") listed below , effec- tive from the date ("Date of Purchase") of original [...]