Lucent Technologies PSAX 1250 Bedienungsanleitung

Doc. No.: 2 55-700-017 COMCODE: 300303252 PacketSta r ™ PSAX 1250 Access Co ncentrator User Guide A PacketStar™ PSAX Central Office Pr oduct Issue 1, Octob er 2000 System Software Releas e 6.3.0 AQueV iew ™ EMS Softwar e Release 4.4[...]

Copyri ght © 2 000 by L ucent T echnolo gies. A ll rights rese rved. For trad emark, regulator y compliance, and rela ted legal informa tion, see the " Copy righ t an d L egal Not ices" sect ion .[...]

255-700-0 17 iii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Copyright and Legal Notices Copyright Copyrigh t © 2000 b y Lucent T echnolog ies. All right s reserved . This material is protected by t he copyright laws of t he United States and other countries. It may not be rep roduced, distrib uted, or altered in a ny fashion by a[...]

Copyright and Legal Notices W arranty Information iv 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 W arranty W ar nings ! CAUTION: Do not make elect rical or mechanical modifications to any of the components in the PSAX syste m. Lucent T e chnologies is not r esponsible for the safety or the performance of a modified Luc[...]

255-700-0 17 v Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Copyright and Le gal Notices Regulato ry Standar ds Complian ce ! CAUTION: If your system or location loses power or your curr ent session ends abnormally while you are in the process of configuring the system, and you have not yet saved the values permanently , you will lo[...]

Copyright and Legal Notices Regulatory St atements vi 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 20S00, 20S 10, 20P01, 2 0P02, 20P03 , 20P04, 20 P05, 20P06, 20P09, 20P1 0, 20P11, 20P 12, 20P13, 2 0P14, 20P15 , 20P16, 20 P17, 20P18, 20P20, 20P2 1, 20P22, 20P23, 20A04, 20A09, 20A12, 20A13, 20A14, 20N01, 20N05 , 21 N05, [...]

255-700-0 17 vii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Copyright and Le gal Notices Regulat ory Statements residential area is likely to cause harmful interference; in this case, you would be req uired to correct th e interfer ence at your own expens e. All cables u sed to con nect to periphe rals must b e shielded an d groun[...]

Copyright and Legal Notices Regulatory St atements viii 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 This equipmen t cannot be used on public coin telephone serv ice provided by the tele phone company . Connectio n to party line se rvice is subject to state tariffs. Contact your state pub lic utility commission, public s[...]

255-700-0 17 ix Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Copyright and Le gal Notices Regulat ory Statements homologati on indiq ue que l’équip ement sati sfait cert aines règles de protection, d’exploitation et de s écurité des réseaux de télécommunications. Le ministère d e l’Industrie ne ga rantit pas que l’é[...]

Copyright and Legal Notices Regulatory St atements x 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Japanese Regulatory Statement V oluntary Control Council (VCC I) Class A Regulatory Statement. T h i s is a Class A product based on the standard of the V oluntary Control Council for Interfer ence by Information T echnolog[...]

255-700-0 17 xi Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Safety W ar nings and Information When installing and operating the PSAX 1250 Access Concent rator, follow the safety guidelines prov ided below to help prevent serious injury and/or damage to th e PSAX 1250 equipm ent. Please read a ll warnings and instructions supplied b[...]

Safety Warnings and Information xii 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 disconnect t he power cor d fr om the module befor e r emoving it fr om the PSAX 1250 chassis. ! DANGER: When setting up a PSAX 1250 Access Concent rator system that uses a single (i.e. non-redundant) Power Supply module, you must install a [...]

255-700-0 17 xiii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Safety W arnings and Information on the equipment. If this connection is made, a ll of the following conditions must be met: • This equipment shall be connected directly to the direct-cur rent supply system grounding electrode conduct or , the bonding jumper from a gro[...]

Safety Warnings and Information xiv 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ! DANGER: Do not work on the system, connect, or disconnect cables during periods of possible lightning activity . ! DANGER: Do not perform any action that could create a possible hazard to others or make the working envi r onment and/or the[...]

255-700-0 17 xv Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Safety W arnings and Information W ARNING: ! Be sure to use the ejector handles during installation and removal of I/O and server modules. W ARNING: ! When inserting modules into t he chassis, slide them gent ly , not forcefully . Exce ssive force may cause the modules to [...]

Safety Warnings and Information xvi 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ! CAUTION: When using a DSP2A, DS P2B or DSP2C V oice Server module and a n Enhanced DS1/E1 module with a PBX and/or Key T elephone System, the PSAX 1250 syste m and your equipment must use a common chassis gro und connection to avoid groun[...]

255-700-0 17 xvii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Contents Copyright and Legal Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i ii T r adema[...]

Contents xviii 255 -700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Grounding Wrist Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 0 Floor Cover ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 T emper ature and[...]

Contents 255-700-0 17 xix Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Circuit Emulation Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3- 3 Dynamic Band width Circuit Emulation Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 DS1 Servi ce . . . . . . . . . .[...]

Contents xx 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Fault Man agement Functio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -28 Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -28 Reporting . . . . . . . .[...]

Contents 255-700-0 17 xxi Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 0 DS3 IMA Mo dule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-50 Software Fe[...]

Contents xxii 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Circuit Emulatio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -65 T erminal Emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-65 HDLC Pass-throug h . . . . [...]

Contents 255-700-0 17 xxiii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Logging onto the Syste m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Help Informatio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Select i[...]

Contents xxiv 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Configuri ng Call Control Resource Allocat ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -77 Setting th e Configuration V alues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-77 Configura tion Guideli nes . .[...]

Contents 255-700-0 17 xxv Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Setting Up for the File T ransfe r Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 -12 T r ansferring S oftware Upgrade Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13 Field Descr iptions . . . . . . . . . .[...]

Contents xxvi 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C: Configuring In-Band Management. . . . . . . . . . . . . . . . . . . . . . . . . C-1 Setting U p In-Ba nd Managemen t Configu ration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C- 1 Using the Di re ct Connecti on Configuration . . . .[...]

Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 255-700-0 17 1-1 1 Getting Started Purpose of This G uide The Packe tStar ™ PSA X 1250 Access Concentr ator User Guide provides information about the fo llowing: • Underst anding the PSAX 1250 system functions a nd featur es • Configuring basic s ystem parameters and ma naging the [...]

Chapter 1 Getting St arted Rela ted Read ing 1-2 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 T o configure the Connection Gateway API, re ad the following publications that are provided on your Lucent T e chnologies Access Concentrato r Modu les Product Inform ation Librar y CD-ROM. T a ble 1 -1. Packe tStar ™ Modul[...]

255-700-0 17 1-3 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading Printed Documents For your convenience, the following documents from your Product Informati on Library CD-ROM are also available in printe d form. For ordering information, contact your Lucent T echnolo gies distributor or acc[...]

Chapter 1 Getting St arted Rela ted Read ing 1-4 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 T able 1-2. PacketStar ™ Release 6.3.0 Produc t Information Library (P rinted Documents) Docum ent Issue COMCODE Docume nt Number PSAX 1250 Insta llation and Oper a- tion Guide, Relea se 6.3 Issue 1 30030323 7 255-700-0 15 P[...]

255-700-0 17 1-5 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading DS1 IMA Module User Guide, Release 6.3 Issue 1 30030309 6 255-700-0 32 DS3 A TM Modul e User Gu ide, Release 6.3 Issue 1 30030310 4 255-700-0 33 DS3 Frame Relay Module User Guide, Rele ase 6.3 Issue 1 30030311 2 255-700-0 34 D[...]

Chapter 1 Getting St arted Rela ted Read ing 1-6 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Other Publications Numerous book s are currently available on the subject of bas ic telecommunications technology and specific protocols. In addition to such general reading, you should a lso be familiar with the specification[...]

255-700-0 17 1-7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading ~ User to Network Interf ace (UNI) Specification V ersion 3.1 ~ VTOA AAL1 T run king Ser vices, af-vtoa-0098 .000 • A TM Forum Impleme ntation Ag reements: ~ Inverse Multiplexin g over A TM V ersion 1.0, af-phy-0086.000 ~ In[...]

Chapter 1 Getting St arted T echnical Sup port 1-8 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 ~ I.356, B-ISDN A TM Layer Cell T ransfer Performance ~ I.361, B-ISDN A TM Layer Specification ~ I.363, B-IS DN A TM Adap tation Laye r (AAL) Sp ecificat ion ~ I.371, B-ISDN T raffic Cont rol and Congestion Control ~ I.431, [...]

255-700-0 17 1-9 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted T ext Conve ntions Icons and Symbols Follow all safe ty guidelines in this document to help prev ent personal injury to you an d damage t o the PSAX 1 250 Access C oncentrator system equipment. Re fer to the pr ocedures within th is user guide [...]

Chapter 1 Getting St arted Electrostat ic Dis charge Prec aution s 1-1 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Electr ostatic Discharge Precautions The ro om where the PSAX 1 250 syste m is located must hav e built- in precauti ons to pro vide pro tection from e lectrostat ic discharge da mage to electronic com[...]

255-700-0 17 1-11 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted About Lucent T echnologies Clothing When work ing with t he PSAX 12 50 system , avoi d wearing cl othing ma de from wool or synthetic materials. T ry to minimize contact between clothing and el ectro nic com ponent s. Handling PSAX 1250 System[...]

Chapter 1 Getting St arted Commen ts on Th is Guide 1-1 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Comments o n This Guide T o comment on the Packe tStar ™ PSAX 12 50 Access Con centrator User Guide , please complete the comment card that accompanied your ship ment and mail it to the follo wing address : Manager[...]

Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 255-700-0 17 2-1 2 Har dwar e Description Overview o f This Chapter This chap ter prese nts an over view o f the PSAX 12 50 system hardwar e. The content is organized as fo llows: • PSAX 125 0 System Features • PSAX 125 0 System Hardware C omponent s ~ I/O Mo dules ~ Optical- T ype I/[...]

Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-2 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 the PSAX 1250 syst em to a true multi-service platfo rm. Featur ing a 1.2 Gbps A T M cell bus architecture, ca rrier -class relia bility , and full red undancy , the PSAX 1250 system is a cost-effectiv [...]

255-700-0 17 2-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents • Channe lized STS-1 e T1 modu le • DS1 IMA module • DS3 A TM module • DS3 Fram e Relay m odule • DS3 IMA module • E1 IMA module • E3 A TM modul e • Enhanced DS1 module • Enhanced E1 [...]

Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-4 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Server Modules • DSP2C V oice Server module ~ DSP2A Mod e ~ DSP2B M ode ~ Echo Canceller Mode • Route S erver module • T ones and Announcements Server module PSAX 12 50 Chas sis The PSA X 1250 sys[...]

255-700-0 17 2-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents ~ In the 58.42 -cm (23-in.) chassis, the CPU modules can be pl aced in any unreserv ed (1 through 16) slot, but usually are pla ced in slots 15 and 16 (or just in slot 16 for a single-CPU configuration[...]

Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-6 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 technologies of the PSAX 1 250 syste m. The dual-bus d esign provi des 1.2 Gbps total bandwidt h and allows live (power -supplied) inse rtion of primary and redundant commo n equipment mo dules, and i n[...]

255-700-0 17 2-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents Power Supply Modules Three t ypes of pow er supply m odules a re availa ble: • 110 V ac power supply module (supported only for the 19-inch chass is) • 220 V ac power supply module (supported only [...]

Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-8 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Figur e 2-5. PSAX 125 0 110 V ac Po wer Supply M odule FAIL ACTIVE non-redundant Power Supply (110V AC) Model 20N04[...]

255-700-0 17 2-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents Figur e 2-6. PSAX 1250 220 V ac Power Supp ly Module FAIL ACTIVE non-redundant Power Supply (220V AC) Model 20N01[...]

Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-1 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Stratum 3–4 Module T w o type s of Str atu m 3 –4 mo dul es are avai lab le : IT U-c om pli an t St rat um 3–4 and ANSI-compliant Stra tum 3–4. The diffe rence in the modules is the level of [...]

255-700-0 17 2-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents all the I/O modu les use the bus from the remai ning Stratum 3–4 modul e, but system throughput is r educed by half, that is, to 600 Mbps. In addition , t he PSAX 1250 system can obtain netw ork clo[...]

Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-1 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 CPU Module Operating in a nonloa d-sharing, primary/standb y mode, the CPU module provides t he proces sing, swi tching, and sto rage funct ions for t he PSAX 1250 system. A R ISC-based microprocesso[...]

255-700-0 17 2-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents Figur e 2-1. PSAX 125 0 CPU Module FA IL ACTIVE CPU ETHERNET CONSOLE LOAD KEY[...]

Chapter 2 Hardware Description PSAX 1250 Sy stem Hardw are Sp ecifications 2-1 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 PSAX 1250 System H ar dware Specifications PSAX 1250 Chassis Specifications The specificatio ns for the PSAX 1250 chassis are given in T able 2-1. PSAX 1250 Power Supply Module Specifications The[...]

255-700-0 17 2-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Sy stem Har dware Specificatio ns The specif ications for the PSAX 1250 220 V a c Power Supply module are found in T a ble 2-3. W ARNING: ! The AC power cor d is rated at 125 V ac. If you will be using this unit in an application [...]

Chapter 2 Hardware Description PSAX 1250 Sy stem Hardw are Sp ecifications 2-1 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The specificat ions for the PSAX 1250 -48 V dc Power Su pply module are found in T a ble 2-4. PSAX 1250 Stratum 3–4 Module Specifications The hardware specifications for the PSAX 1250 Stratum 3[...]

255-700-0 17 2-17 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Sy stem Har dware Specificatio ns ! CAUTION: The external synchronization interface port pr ovided on the Stratum 3–4 module is intended only to be connected to an in-building reference clock signal. The port i s not intended to[...]

Chapter 2 Hardware Description PSAX 1250 Sy stem Hardw are Sp ecifications 2-1 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 PacketStar I/O and Server Module Har dware Specifications The hardware specificatio ns tha t a ll PacketSt ar ™ I / O a n d s e r v e r m o d u l e s h a v e in common ar e giv en in T able 2-7[...]

255-700-0 17 2-19 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Sy stem Har dware Specificatio ns PacketStar I/O and Server Module Envir onmental Specifications The environmental specifications f or the PacketSt ar ™ I / O a n d S e r v e r mo d u l e s are give n in T able 2-8 . PacketStar [...]

Chapter 2 Hardware Description PSAX 1250 Sy stem Hardw are Sp ecifications 2-2 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 DSP2B V oice Server 512 KB (SRAM) 384 KB (SRAM) N/A N/A Low 14 W DSP2C V oice Server 1 MB (SRAM) 512 KB (SRAM) N/A N/A Low 16–17 W Enhanced E1 (6 port) 16–64 MB 8 M B 1 MB T ot al minus 9 MB [...]

255-700-0 17 2-21 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description Facility Power Sou rce Requir ements Note: The I/O b uffers carry 1 6,384 cells pe r megabyte for a ll Access Concen trator modules except the V oice 2-Wire Office module, the V oice 2-W ire Station module, and the DSP2A, DSP2B, and DSP2C V[...]

Chapter 2 Hardware Description PSAX 125 0 System Configurat ions 2-2 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 PSAX 1250 System Con figurations Be sure you have ordered a nd received the correct combination of PSAX 1 250 chass is type, Powe r Supply type, cable manageme nt guide kit, air deflector kit, a nd fan tra[...]

Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 255-700-0 17 3-1 3 System Featur es Overview o f This Chapter This chapter p resents a so ftware overvie w of the PSAX 1250 Access Concent rator offe red by Luce nt T echnol ogies. The following aspects o f the PSAX 1250 Access Conc entrator system are discussed: • Features a nd capabil[...]

Chapter 3 Syst em Features System Ca pabil ities 3-2 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The PSAX 1250 Access Concen trator system offers a variety of user interfaces to suppor t voice, video, a nd data application s (see Fig ure 3-1). While voice, vide o, and data traffi c have traditionally bee n carried on se[...]

255-700-0 17 3-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features User Interfaces • Inverse multiplexing over A TM (IMA ) to create vir tual access lines t hat are faste r than E-1 li nes, but not as expensive as T -3/E-3 line s • Live ins ertion of hot-swappa ble module s • An integr ated local manageme[...]

Chapter 3 Syst em Features User Interfaces 3-4 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Packe tStar ™ Acce ss Concentra tors support structured circui t emulation (individual DS0 circuit emulation) of traditional voice-base d and data services o n the DS1 module. Be cause voice services are essentially constant bit[...]

255-700-0 17 3-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features User Interfaces compliant with the specification and d oes not interoperate with other dev ices that are fully comp liant. The DBCES feature, in essence, performs idle channel suppression for voice traffic. PBX v oice traffic uses DB CES to save[...]

Chapter 3 Syst em Features User Interfaces 3-6 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Channelized ST S-1e • Enhanced DS1 module • Enhanced E1 module • Multi-Seri al module High-level data link cont rol (HDLC) uses an ITU-T SS link layer pr otocol standard for point-to-point and multipoint communication. C[...]

255-700-0 17 3-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features User Interfaces mechanisms a dded to support source routing, cra nkback and alt ernate routing of all call setup requests in case of connection setup failure. The path se lections for s pecific calls are ba sed on route options provide d by PNNI[...]

Chapter 3 Syst em Features User Interfaces 3-8 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 PTSEs, describin g the resources of the origin ating switch and the outbou nd resources of each of that switch’ s attached links. PTSEs describe attr ibutes, such as: ~ T raffic types each link can support (any of the various A [...]

255-700-0 17 3-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Network Mana gement because they do not look as far into the NSAP; a level with a scope of 64 (maskin g the first 8 bytes) r esides ab ove a level with a s cope of 72. T o make the best use of PNN I’ s capa bilities, network architects mus t p[...]

Chapter 3 Syst em Features Network Mana gement 3-1 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 This port is typically used for local management (using a direct serial connection), but it can also be used for remote management. Remote management may b e performed ove ra public switched telephone network ( PSTN) with t[...]

255-700-0 17 3-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Network Mana gement In-band Management SVCs Releas e 6.2 adde d the opt ion of in-ba nd manag ement w ith switched virtual circuits (SVC). P reviously , a PSA X device or a network manag ement system computer could only be se t up to manage one[...]

Chapter 3 Syst em Features Network Mana gement 3-1 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Centralized collecti on of PSAX and core events in the NavisCore Even ts Browser (found within HP OpenV iew), including customized PSAX Events View , and separate cus tomized events windo ws for PSAX pro duct traps a nd[...]

255-700-0 17 3-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es PSAX 1250 Software Featur es The Access Conce ntrator system s oftware uses permane nt virtual circuits (PVCs) and sw itched vi rtual c ircuits (SV Cs) to p rovide en d-to-en d connectivity for transmission in a n[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-1 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 make use of simple PV Cs within the network, interoperability issues do not exist with intervening switches. During normal operation, the primary PVC carries al l the data associated with the DHPVC. During this t [...]

255-700-0 17 3-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es AQueMan™ Algorithm W ith A TM, predictab le QoS is achieved for all applicat ions by the transmission o f voice, video, and data usi ng short, fixe d-length cells interl eaved at guaranteed bit rates. The guaran[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-1 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 T able 3-2 illust rates t he attrib utes of th e classe s of servi ce suppo rted b y the Access Concentrat or system so ftware . The following two tables il lustrate how A TM classes of service map to internal pri[...]

255-700-0 17 3-17 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es system. The flexibility of t he Access Concentrator systems allow s the user to tailor the system based on the required se rvice applications and the selection of the a ppropriate priority lev els. T able 3-3. Cel[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-1 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 AQueMa n™ classifies traffic based on s ervice-level prior ities and limits congestion by addressing three dimensions of traffic management: • Cell loss v ersus cell dela y for cell disc ard As T a b le 3 - 5 [...]

255-700-0 17 3-19 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es networkin g p rotocols. The connect ion gateway allo ws p owerful interworking of A TM, ISDN, SS7 , CAS, and othe r protocols. In Release 6 .3.0, these capabilitie s have been impro ved to support such ne w featur[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Bridging is a ccomplished by re laying data from the MAC layer of o ne LAN to the MAC layer of another LAN (see Fig ure 3-4). Ethernet brid ging over the A TM network is accomplished using A TM Forum standards; th[...]

255-700-0 17 3-21 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es • Brid ge m anagem ent This function enables end users to manage configuration and performance, and collect cell records an d billing information. S tandard Etherne t MIBs, as defined in A TM Forum docum ent RF [...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 environment, such as t raffic transmitte d across sa tellite and line-of -sight ra d io - fr e q u en c y c ir cu i t s. Mo s t of th e s e ty p es of ci rc u it s tr a ns m i t at th e rat e of 2.048 Mbps or slow[...]

255-700-0 17 3-23 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es W h e n t h e u s e r s e l e c t s t h e 1 / 2 , t h e 1 / 4 , o r t h e 1 / 8 r a t e , t h e e n c o d e r m a i n t a i n s that selected rate of encoding regardless of actual error conditions. When the user s[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Note: FRF . 5 and FRF .8 are not interoperab le and cannot be used at both sides of a network. Y ou may wish to use an F RF . 8 approach for applications involving interco nnectivity between two frame relay device[...]

255-700-0 17 3-25 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es The main features o f LANET include the following: • Regular fra ming-bit patterns that enhance cell delineati on in high-noise environment s • Compatibility with traditional link enhancement schemes s uch as [...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 accounting for 0.63 percent of the ban dwidth, includes the LANET f rame and subframe headers, which are used in conjunction with traditional c ell-header error -detection methods, such as header error correction [...]

255-700-0 17 3-27 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es The LANET subframe functions i n the fo llowing ways : • The timely arrival of the header patterns is used as a confidence check, confirming that the system is proper ly synchronized. • In the event of synchro[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • OAM Cell T ype: the managemen t type (fa ult, activation/dea ctivation) • OAM Function T ype: the specific function (AIS, RDI , continuity check, loopback, forward m onitoring, backwa rd reporting, and s o o[...]

255-700-0 17 3-29 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es The activation/deactivation O AM mechanism is used to remotely s tart and stop the generation of cells that perpe tually monitor performance and continuity . These mechanisms can indicate to the far end a connecti[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 F4/F5 AIS alarms are generat ed when a network elemen t receives one of the following failure indications from t he physical layer: • LOS (Loss of Signal ) alarm The LO S alarm indi cates ther e are no transit i[...]

255-700-0 17 3-31 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es within five seconds, the loopb ack is conside red successful. If the source does not receive a success ful loopback, it d eclares a time out. Loopbac k check supports the following applicatio ns: ~ End-to-end lo o[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ B-A (e gress): t oward the activa tor/deacti vator ~ both: bidire ctional • Correl ation T ag: nu mber u sed to correlat e tran smitte d activatio n/deactiva tion requests with thei r respons es • PM Block S[...]

255-700-0 17 3-33 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es • The AIS alarm i s stopped by the NE as soon as it receives an i nput signal. Modules : OC-3 MM APS, O C-3 MMAQ, OC-3 MMTS, Oc-3 SM APS, OC-3 SMAQ, OC-3 SMTS A network element ( NE) will transmit an L-AIS ( lin[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Alarm Indicator Signal (AIS) Module: DS1 IMA A network element ( NE) will transmit an AIS alarm when it detects a defect o n t h e u n f r a m e d , a l l o n e s AI S s i gn a l f o r 2 . 5 se c o n d s +/ - 0 . [...]

255-700-0 17 3-35 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es signaling proced ures. Consequently , this type of conne ction has attributes of both a switched virtual connection and a permanent virtual connection. Specifically , a n SPVC is es tablished and released between [...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • The Access Concent rator sy stem (e quipped w ith 64 MB of memor y on the CPU module) can proce ss 20,000 maximum sim ultaneo us SVC calls in pr ogress. • The individual call se tup time is 16 milliseconds ([...]

255-700-0 17 3-37 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es interf ace (UNI) to the us er . The Access Concent rator po rt recei ves these user - side messages from the user and based on resource availability , route determ ination, an d other network fa ctors, pres ents a[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The following state tra nsition messages are us ed for A T M point-to-point call and connection control: • The infor mation ele ments used in the Ca ll Establ ishment-Set up message allow the user to re quest th[...]

255-700-0 17 3-39 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es T raffic Sh aping The traffic shaping feature is a method for controlling the flow of data t raffic. It is impleme nted in firmware on modules that are offe red with traff ic- shaping variatio ns. Those modules ar[...]

Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-4 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 MBS par ameter , end users who se traffic vi olates th eir contr actual MB S parameter experience high cell loss (and hence high pa cket loss). With the traffic-shaping fe ature of the OC-3 c and the STM-1 mo dule[...]

255-700-0 17 3-41 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es The algorit hm processes traf fic moving out of the input cell selection buff er according to the SC R of the pa rticular VPC /VCC. The MBSs of traffic-shap ed output are set as follows: The OC-3c a nd the STM -1 [...]

Chapter 3 Syst em Features I/O, Opti cal, and Server Mo dules 3-4 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The DSP 2C module su pports A TM Adaptation Layer 2 (AAL-2) S VC connections and PVC multiplexing for reduced ca ll latency . T o protect facsimile t ransmissions, the DSP2C module automatically turns off voi[...]

255-700-0 17 3-43 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features I/O, Optica l, and Server Modul es • DS3 IMA module • E1 IMA module • E3 A TM modul e • Enhanced DS1 module • Enhanced E1 module • Ethernet module • High-D ensity E 1 module • High-Spe ed module • Medium-Density DS1 module •[...]

Chapter 3 Syst em Features Alar m Modul e 3-4 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • T ones and Announcements Server module Alarm Module The Alarm module de tects environm ental cha nges on t he PSAX 12 50 and PSAX 230 0 systems that a re in remot e locatio ns wi thou t human supervis ion, and consolidates a[...]

255-700-0 17 3-45 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Channeli zed DS3 Modul e Channelized DS3 Module The Cha nnelized DS3 module prov ides one p ort with a lin e rate of 44.736 Mbps . The user can configure this module to provide N x 64 Kbps (fractional DS1) structured circuit emulation service. [...]

Chapter 3 Syst em Features Channel ized STS -1e (T1) M odule 3-4 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Private Network -Network Interface (PNN I), Specification V er sion 1.0 , af-pnni- 0055.000 • Integrated Loca l Management Interface (ILM I) Specification V e rsion 4.0, af-ilmi- 0065.000 The follo wing [...]

255-700-0 17 3-47 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Channeli zed STS-1e (T1) Modul e emulation, the Channelized ST S-1e T1 module can adapt a maximum of 28 DS-1 channels per port to ATM virtual channels with i ndividual VPIs a nd VCIs. Signa lling bit tra nsport is als o provided, using A TM For[...]

Chapter 3 Syst em Features DS1 IMA M odule 3-4 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ Frame r elay UNI and NNI ( FRF .1, FRF .2 , FRF .5, and FRF .8) ~ ITU-T I.370 (fra me relay policing) ~ Congest ion management ~ T raffic policing Ha rd wa re Fe a t ure s • Number of ports: one • Connector type: two BNC [...]

255-700-0 17 3-49 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features DS3 A TM Modul e DS3 A TM Module The DS3 A TM module pr ovides a networ k interface at D igital Signa l Level 3 (DS-3), with a line rate of 44.736 Mbps . This module accommodates A TM cell- bearing traf fic. T ypically , this module is used to [...]

Chapter 3 Syst em Features DS3 IMA M odule 3-5 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • FRF .2 —Netwo rk-to-Net work In terface (NNI) • FRF .5 —Frame R elay/A TM PVC Net work Inte rworking • FRF .8 —Frame R elay/A TM PV C Servic e Interw orking • Multise rvices: ~ Frame r elay UNI and NNI ( FRF .1,[...]

255-700-0 17 3-51 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features DS3 A TM Modul e Module User Guide ) an d the DS 1 IMA module (see the PacketSta r ™ DS1 IMA Module User Guide ). I t allows you to configure up to 28 virtual T1 ports for n a t i v e DS 1 ATM s e r v i c e s or fo r a s m an y a s 14 i n d e[...]

Chapter 3 Syst em Features DS3 Frame Relay Module 3-5 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Concen trator system to an ATM e dge switch . The DS3 A TM modu le has three types of L ED indicators: FAIL, ACTI VE, and LOS ( loss of sign al). Softwar e Featur es The DS3 A T M module uses A TM Forum specif ications U[...]

255-700-0 17 3-53 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features E1 IMA Module ~ Frame r elay UNI and NNI ( FRF .1, FRF .2 , FRF .5, and FRF .8) ~ ITU-T I.370 (fra me relay policing) ~ Congest ion management ~ T raffic policing ~ HDLC pass -thro ugh Frame Relay The DS3 Frame Relay module ha s interfaces fo r[...]

Chapter 3 Syst em Features E3 A TM Module 3-5 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 E-1 lines. At the destination IMA module, the E-1 streams a re merged back together in correc t order a nd passed on to other modules a s directed by virtual circuit connections. IMA dynamically handles conditions when E-1s with[...]

255-700-0 17 3-55 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features En hanced DS1 Mo dule • Integrated Loca l Management Inter face Specification V ersion 4.0, af-ilmi- 0065.000 Ha rd wa re F ea t ure s • Number of ports: two • Connector type: four B NC connectors for the two ports (each port has one rece[...]

Chapter 3 Syst em Features Enhance d DS1 Module 3-5 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Note: The Enhanced DS1 Circuit Emulation (CE only) module is functionally identical to the Enhanced DS1 module, except that the Enhanced DS1 (CE only) module provides a license for circuit emulation functions only . Softwa[...]

255-700-0 17 3-57 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features En hanced E1 Modu le • Line rat e: 1.544 Mbps Enhanced E1 Mod ule The Enhanced E1 mo dule provides six p orts, each with a line rate of 2.048 Mbps. The interface s support ITU- T G.703 and ITU G.704. Each por t can be independently configure [...]

Chapter 3 Syst em Features Ethernet Module 3-5 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 A T M Forum T echnical Committee Specifications: • Circuit Emulation Service Interoper ability Specification V ersion 2.0 af-vtoa- 0078.00 • User-to-Network Interface Spe cification Version 3.0 , af-uni. 0010.001 • User-t[...]

255-700-0 17 3-59 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features High-Densi ty E1 Modul e Softwar e Featur es The E thernet bridging feature includes the encap sulation of the media access control (MAC) layer data , using standards i n the A TM Forum RF C 1483 specification, for filte ring and bridge managem[...]

Chapter 3 Syst em Features High-Spe ed Module 3-6 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 af-ilmi-0065.000 Multi-Serv ices: • A TM: A TM UNI 3.0 and 3. 1; Interim inter -switch signaling protocol (IISP) user , IISP network • CE: Circuit emulation service (CES) with ISDN PRI using 64 Kbps clear channel; dynami[...]

255-700-0 17 3-61 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Medium-Densi ty DS1 Modul e The soft ware suppor ts the follo wing A TM Foru m T echnical Committe e Specifications : • Circuit Emulation Service Interoperab ility Specification V ersion 2.0 af_vtoa_ 0078.00 • User t o Network In terface (U[...]

Chapter 3 Syst em Features Medium-De nsity DS1 Modu le 3-6 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 integrated services digital net work with a primary rate interf ace (ISDN PRI) service, a nd A TM services. Y ou can configur e the Medium-Density DS1 module to provide N x 64 Kbps (fractional T1) structured ci rcui[...]

255-700-0 17 3-63 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Multi -Seria l Modu le • HDLC pass throug h mode (N x 56 and N x 64) • Frame r elay UNI and NNI ( FRF .1, FRF .2 , FRF .5, and FRF .8) • ITU-T I.37 0 (Frame re lay policing) • Congest ion management • T raffic policing Ha rd wa re F e[...]

Chapter 3 Syst em Features Mult i-Seri al Mo dule 3-6 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 asynchronous transfe r mode (A TM) (using limit less A TM network [LANET] protocol). Softwar e Featur es The so ftware suppor ts the following Fra me Rela y Forum (FR F) Implem entation Agreement s: • FRF .1—User-to-[...]

255-700-0 17 3-65 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Multi -Seria l Modu le (NNI) by setti ng perf ormance parameters such as the Committed Inf ormatio n Rate (C IR), Exces s Burst size (Be), an d Committed Burst size (Bc). Circuit Emulation Each port on the Multi-Serial module can be configured [...]

Chapter 3 Syst em Features V oice 2-Wire Of fice Mod ule 3-6 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Connector type: micro-DB15 • Interface s supporte d: EIA-2 32-D, EIA-530, EIA-449 v .1 1 (subset), and V .35, with the Access Conce ntrator system co nfigured as ei ther a data terminating e quipment (DTE) o[...]

255-700-0 17 3-67 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Optical-T ype I/O Modules voice device can be connected directly to this module in the Acces s Concentrator sys tem to communicate over an A TM network. The V oice 2-Wire Station module has three types of LED indicators: ACTIV E, F AIL, and L O[...]

Chapter 3 Syst em Features OC-3c Mul ti-mode and Singl e-Mode Modu les 3-6 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • One variat ion for bo th the Multi- Mode and Sing le-Mode types, wit h the names OC-3c MM AQ module and OC-3c S M AQ module, uses the AQueM an ™ algorithm for flo w control. • The other va ri[...]

255-700-0 17 3-69 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features STM-1 M ulti-Mode and Sin gle-Mode Mo dules STM-1 Multi-Mode and Single-Mode Modules The STM-1 Multi-M ode (MM) an d Single-M ode (SM) m odules pr ovide a fiber o ptic interf ace operat ing in the concat enated mod e of the SONET - defined line[...]

Chapter 3 Syst em Features STM-1 M ulti-Mode and Sin gle-Mode Mo dules 3-7 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Interim Inter-Switch S ignaling Protocol, af-pnni-0026.000 • Private Network -Network Interface (PNN I), af-pnni-0055.000 Protocol s: • T raf fic management: ~ AQueM an™ algorithm (for traf[...]

255-700-0 17 3-71 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Server Modu les Server Modules DSP2 V oice Server Module The DSP 2C V oice S erver module pr ocesses vo ice and other dig ital da ta on a Packe tStar ™ Access C oncentrator system . Th e modu les h ave t wo i ntern al logical ports: one t o r[...]

Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Soft perma nent virtual cir cuit (SPVC) s upport for circuit e mulation servi ce (CES ). SPV C connec tions can be used for voice traf fic on all mode s of the DSP2C V oice Serv er (A, B, and Echo Cancellation mo[...]

255-700-0 17 3-73 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features DSP2 V oice Ser ver Modu le T able 3-9. Ma trix of Featur es and Standa rds Su pported on the DSP 2C Modes A, B a nd Echo Cancella tion Releas e 6.3.0 DSP2C Non-Multiple xed AAL2 (Non-M ux-Aal2) DSP2C Standar d AAL2 DSP2A DSP2 B Echo Can cel Mo[...]

Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 DSP2C V oice Server F eatures Multiplexed or Nonmultiplexed AAL-2 The choice of multiplexed A TM Adaptation Layer 2 (AAL-2) has been added. As the capaci ty of the DSP2C is 32 DSPs , up to 32 trunk groups can be conf[...]

255-700-0 17 3-75 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features DSP2 V oice Ser ver Modu le on-hook t o off-hook , where the on- hook state last bet ween 300 m sec and 1000 ms ec. This fea ture is compliant w ith TIA/EIA-4 64-B Requ irements for Privat e Bran ch Excha nge (P BX) Swit ching Eq uipme nt. The [...]

Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 DSP2A and DSP2B Single-Mode V oice Server Modules (System Release 6.2.0) ! CAUTION: The DSP2A and DS P2B Single-Mode Modules are not upgradable to System Softwa re Release 6.3.0. See T able 3-10 for a sum mary of DSP[...]

255-700-0 17 3-77 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Route S erver Modul e • On the DSP2A a nd DSP2B si ngle-mode module s, the number of t ails supported in echo cancellation is 32 msec fe wer than in DSP2C mode i n Ta b l e 3 - 1 0 . • In the DSP2B single-mode , the number of channels suppo[...]

Chapter 3 Syst em Features T ones and Announ cements Se rver Module 3-7 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Y ou can assign an authenti cation password to an IP network inte rface for maximum security . Doing so can prevent those who cannot directly access the net work from sending fa lse routing informati on[...]

255-700-0 17 3-79 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features and edge devices s uch as the AC 60 and the PSAX 20, the module offers call routing information to a connection gateway without using an expensive circuit switch. Up to 128 circuits can be tested simultaneously using the T AS Server M odule. Th[...]

Chapter 3 Syst em Features 3-8 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0[...]

Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 255-700-0 17 4-1 4 Configuring the Basic System Overview o f This Chapter This chapter d escribes how t o configure the PS AX 1250 Acces s Concentrator system a nd set the sy stem value s for your site. Bef ore you do this, be sur e you have done t he following task s as describe d in th[...]

Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-2 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The PSA X 1250 Logon window is displaye d (see Fig ure 4-1): 3 In the User name fie ld, type one of t he following values, a nd press Enter: ~r e a d w r i t e if you want to view and change all configurat[...]

255-700-0 17 4-3 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Loggi ng ont o the S ystem The Conso le Interf ace Main Menu window is dis played (see Figure 4-2). End At the time of initial configura tion, the Console Interface M ain Menu window i s displayed a field with a pair of oppo sing s[...]

Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-4 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Begi n V iewin g the Hel p W indo ws 1 On the Conso le Inter face Ma in Menu window , press the ? ke y . Th e firs t Main Menu H elp window is d isplayed (s ee Figure 4 -3): Figur e 4-3. Main Menu He lp Wi[...]

255-700-0 17 4-5 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Loggi ng ont o the S ystem 2 T o display the second through fourth Main Menu Help windows (see Figure 4- 4 through Figure 4 -6), pres s the Down Ar row . Figur e 4-4. Main Me nu Help Window 2 Figur e 4-5. Main Me nu Help Window 3[...]

Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-6 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 En d Selecting Options, Fields, and Commands As described o n the Help windows, follow these st eps to select an option, field, or co mmand: 1 Press the Up Arrow o r the Down Arrow to highlight (r everse v[...]

255-700-0 17 4-7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Changi ng th e System Pass word and Ot her User Option s ~ The informati on line displays a messa ge indicating an e rror or successful completion of the command. ~ The sys tem displ ays the nex t higher l evel or pre vious win dow[...]

Chapter 4 Configuring the Basic System Chan ging the S ystem Passwor d an d Other Use r Options 4-8 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The User Options win dow is displa yed (see Figure 4 -7). 2 Select the Change Password For < user name > field . a. As prompt ed on the window , type the current passwor[...]

255-700-0 17 4-9 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Console Interface Main Men u 6 On the Console Interfa ce Main Menu window , select the Save Configuration co mmand, and pr ess Enter to store the values in the PSA X syst em dat abase . The n ew val ues wi ll tak e eff ect aft er t[...]

Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Site-Sp ecific Menu windo w is displayed (see Fig ure 4-8). 2 On the Site Specific Menu w indow , select t he Si te-Spe cific Configuration command. Figur e 4-8. Site-Specifi c Menu Wind[...]

255-700-0 17 4-11 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site The Site-Sp ecific Configu ration windo w is displayed (see Figur e 4-9). Note: The syste m performs error che cking on each field by highlighting any field containing an incorrect value. Use[...]

Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 3. CPU IP and swi tch IP addresses cannot be on the same subnet as the in-ban d IP addres s. 4. CPU IP , switc h IP , and in-band IP addr esses may each be zero, but CPU IP and Switch I P ad[...]

255-700-0 17 4-13 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Begi n V iewin g OAM Pro perties 1 Select the values for the fields in the Master A TM Address and OAM related data pan el as descr ibed in T able 4 -1. 2 Select the Apply Site-Specific Conf [...]

Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Begi n Enter ing th e Syste m Iden tifi cation T o s e t t h e sy s t e m id e n t i f i c a t i o n fo r yo u r si t e , s e l e c t t h e va l u e s f o r t h e f i e l d s on the Sy stem [...]

255-700-0 17 4-15 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site 4 Select the Apply Site-Specific Configurat ion command, and eithe r press Ente r to save t hese values now , or after you ha ve entered data in all the fields on this windo w . End Configuri[...]

Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 5 Select the Apply Site-Specific Configurat ion command, and eithe r press Enter to save these values now , or wait until you have ente red data in all the fields on this window . Note: The [...]

255-700-0 17 4-17 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Configuring the TCP Client/Server f or a Connection Gateway If you ar e using the Connection Gateway API with your Packe tStar PSAX 1250 syste m, yo u need to configure the s ystem as either [...]

Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Connection Gateway Application Programming Interfa ce API is a pro tocol that can be used inste ad of SNMP to mana ge the Lucent T echnologie s PSAX syst ems. It prov ides an interface to th[...]

255-700-0 17 4-19 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Figur e 4-12. TCP Server Configu ration Window (Client TCP T ype) Figur e 4-13. TCP Server Configu ration Window (S erver TCP T ype)[...]

Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-2 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands on this window have the following functions: 3 Y ou ca n enter data into the fie lds on the TCP Serve r Configuration window as described in T able 4-4. Select the Appl[...]

255-700-0 17 4-21 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Begi n Entering t he SNMP T rap D estinations 1 Select the NMS 1 field, and t ype the IP address value of the remote management station to which you want to send SNMP trap s. 2 Under the Source Add[...]

Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Concen trator s ystems ov er an Eth ernet network. See th e appe ndix “Configuring I n-Band Manage ment.“ Three basi c methods for configu ration are possib le: • Direct connection The manag[...]

255-700-0 17 4-23 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Before cr eating an SVC connection, y ou need to set up the Unix workstation as the ARP server , and each of the Access Concentrator s ystems. T o do this, perform the step s in the fol lowing pr o[...]

Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 7 Enter the Address Pr efix . This is t he Addres s Prefix of the node address of the OC-3c module. 8 Configure the ILMI interf ace. (This is an optional step , but strongly recommended.) 9 On the[...]

255-700-0 17 4-25 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement 2 Select the In-Band Management op tion an d pres s Enter . The In-Band Ma nagement Configuration Window displays (see Figure 4-16) . Figur e 4-15. Site-Speci fic Window Figur e 4-16. In-Band Manag[...]

Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands on this window have the following functions: 3 In the In-Band Manageme nt Configuration window , enter the IP addres s and IP Mask for the PSAX device. Note: This address mus[...]

255-700-0 17 4-27 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Field Descriptions 5 Select the values for the fields on this window from the va lues given in Ta b l e 4 - 6 . Figur e 4-17. In-Band Managem ent Configuration Window (SVC an d ARP Enabled) T able [...]

Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 6 Select the Apply Configuration command and press Enter . End 7 Select the In-Band Mgmt Route T able command and press Enter . The Inband Ma nagement Route T able window is displayed (s ee Figure[...]

255-700-0 17 4-29 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Commands The commands on this window have the following functions: 8 Select the Add a new route command and press Enter . The Inband Management Route Configuration window displays (see Figure 4-19)[...]

Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-3 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Note: At the time of initial setup, the In-B and Management T able window is empty . After you have set up routes, this window displays all the routes of this type in the system. 9 Select the Add [...]

255-700-0 17 4-31 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement The route is now adde d. 12 Select the Go Back to Route T able command and press Enter The Inband Ma nagement Route T able window displays with the new route a dded (see Figure 4-20) . Commands The[...]

Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-3 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Viewing In-Band Stat isti cs Da ta T o view the In- Band Management Interface St atistics windo w , return to the In-Ban d Manageme nt Config uration w indow (see Figure 4- 16), and se lect the Vi[...]

255-700-0 17 4-33 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Commands The commands on this window have the following functions: Field Descriptions The statist ics in this window are described in T able 4-8. Figur e 4-21. In-Band Managem ent Interface St atis[...]

Chapter 4 Configuring the Basic System Using the Equ ipment Config uration Window 4-3 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 En d Deleting an In-Band Management SV C Route Perform the step s in the follow ing procedure to delete an In-Band SVC route . Begi n Deleti ng an In -Band SV C Route 1 In the Inband Man[...]

255-700-0 17 4-35 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Using the Eq uipment Configurati on Window The Equ ipment Co nfiguratio n window is display ed (see Fi gure 4-22 ). The Equipment Configuration window displ ays the following: ~ All the input/ output (I /O) and se rver mod ules in[...]

Chapter 4 Configuring the Basic System Configuri ng the Stratum 3–4 Mod ule 4-3 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Configuring the Stratum 3–4 Module Note: D a ta a nd vo ic e tr a n sm i t mo s t ef f ic i en t ly (w i th t he l ea s t am o u nt o f cells lost per second) if a proper clock timing sour[...]

255-700-0 17 4-37 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng the Stratum 3–4 Mod ule The Stratu m Configurat ion window is display ed (see Figure 4-23 ). Note: The [ Primary Stratum Mode] and [Line Timing Status] fields indicate the curr ent modes of ope ration for the Stratu[...]

Chapter 4 Configuring the Basic System Configuri ng the Stratum 3–4 Mod ule 4-3 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 3 Select the Accuracy field, and press Enter to cycle through the pred efined set of values ( Stratum3 or Stratu m4 ). 4 Select the Synchronization Sour ce field, an d press E nter to cycle [...]

255-700-0 17 4-39 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng the Stratum 3–4 Mod ule Note: The fol lowing ste ps 5 and 6 in this proced ure apply only if you select the LineTiming v a lu e i n th e Synchronization Source field. When you select this value, the Primary Li ne So[...]

Chapter 4 Configuring the Basic System Configuri ng I/O and Server Modu les 4-4 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The value displa yed in the [Line Timing St atus] field is changed . Configuring I/O an d Server Modules Once the Stratum 3–4 module has been confi gured, I/O a nd server m odules are config[...]

255-700-0 17 4-41 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration PNNI System-Wide Conf iguration For an overv iew of PNNI and the PNNI features supported on the PSAX 125 0 system, see the section abo ut PNNI in Chapter 3. T o config ure a PNNI node for you r PSAX [...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands in this window have the following functions: The other commands on this s creen provid e read-only informati on to assist in monitoring PNNI status. Figur e 4-25. PNNI Syst[...]

255-700-0 17 4-43 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 3 Select the PNNI Node Configuration co mmand and press Enter . The PNNI Node T able window is displayed ( see Figure 4- 26). • PN NI Map L ink Infor- mation Displays the mapping for the nodes a nd[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands on this window have the following functions: 4 Select Add Node Ent ry and p ress Ente r . The PNNI No de Config uration w indow is dis played (see Figure 4 -27). Figur e 4-[...]

255-700-0 17 4-45 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Commands The commands on this window have the following functions: Field Descriptions 5 Select the values for the fields on this window from the values given in Ta b l e 4 - 1 3 . Figur e 4-27. PNNI [...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 T able 4-13. Field V alues for the PNNI Node Con figuration Window Field Na me V alu es Descript ion Node Inde x 00000 (default); Range: 1–65535 The node index identifies a logical PNNI entity[...]

255-700-0 17 4-47 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Node Lowe st T ru e (default ), False Specifies the root node (true if the cur- rent node is root). Select Tr u e for this field. Note: It is recommended that you use the default value of Tr u e , be[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 6 Select the Create Node Entry command and press Enter . The Nod e entry is created and t he Node I d field is displayed th e node identifier o f your PSAX 12 50 system. 7 Select the Bring Node [...]

255-700-0 17 4-49 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Configuration window . The following p rocedure is not necessa ry to follow unless you want t o advertise th e reachable add resses that the s ystem cannot learn or automa tically detect. The R oute [...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 4 Select the Add Route Address Entry command. The PNNI Route Address Configuratio n window is displayed (see Figure 4-29) . Commands The commands in this window have the following functions: Com[...]

255-700-0 17 4-51 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Field Descriptions 5 Select the values for the fiel ds in this window as described in T able 4-14 . • View Metrics T able Displays th e PNNI Metrics T able window . • Go B ack to Previous Screen [...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Address Inde x 1 (defa ult) This number references an entry in a table tha t keeps trac k of which nodes can access which prefixes. Addr ess T ype Exte rior (defau lt) The type of connectivity f[...]

255-700-0 17 4-53 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 Press Ctrl+A t o Create Route Addr ess Entry . The route is completed. 7 Using the instructions in the appropria te PacketStar™ Module User Guide , configure a s econd port with the A TM UNI inte[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands in this window have the following functions: 2 Select the Add Metrics Entry command. The PNNI Met rics Configurat ion window is disp layed (see Figure 4-31). Figur e 4-30. [...]

255-700-0 17 4-55 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Commands The commands in this window have the following functions: Field Descriptions 3 Select the values for the fiel ds in this window as described in T able 4-15 . Figur e 4-31. PNNI Metrics Confi[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 T able 4-15. F ield V alues for the PNNI Metrics Configu ration Window Field Na me V alu es Descript ion Node Index 0 ( default) Range: 1–6553 5 The uniqu e identifie r for this n ode. Enter 1[...]

255-700-0 17 4-57 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 4 Select the Create Metrics Entry command. This ent ry is added t o the PNN I Metrics T able windo w . 5 If you are making chan ges to a n e xisting metric configuratio n, sele ct the Apply Configura[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Site-Specific Menu is displayed . 2 Select the PNNI System-Wide Configuration option, and pr ess Enter . The PNNI Sys tem-W ide Config uration window is di splayed (s ee Figure 4-25) . 3 Sel[...]

255-700-0 17 4-59 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration The PNNI S ummary Addre ss Entry window is di splayed (s ee Figure 4-33) . Commands The commands in this window have the following functions: Field Descriptions 5 Select the values for the fiel ds in[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 6 Select the Create Summary Address Entry command. This ent ry is added t o the PNN I Summar y Address T able win dow . 7 Ty p e C trl+G to return to the Console Interface Main Menu window a nd [...]

255-700-0 17 4-61 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Begi n V iewin g PNNI M ap Links 1 On the Console Interface Main Menu, select the Site-Spe cific Configuration option, and press Enter . The Site-Specific Menu is displayed . 2 Select the PNNI System[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Originating Node Ide ntifier is t he node ide ntifier of the node whose connectivity within itself or to o ther nodes is being de scribed. The Org Port Id is th e po r t i d e n t i f i e r [...]

255-700-0 17 4-63 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Field Descriptions 5 The values for the fields in this window are describ ed in T abl e 4-17. Command F unction • View Metrics T ables Displays the PNNI Me trics Configura tion window . • Go B ac[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 6 T o view t he Metrics tab le, select V iew Metrics T ables and press Enter . The Met rics T able w indow is displayed ( see Figure 4-30). 7 T o return to the M ap Link T able window , Go Back [...]

255-700-0 17 4-65 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration The PNNI Sys tem-W ide Config uration window is di splayed (s ee Figure 4-25) . 3 Select the PNNI Li nk Information command. The PNNI L ink T able window is displayed (see Figure 4-36). The PNNI Link[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 4 If a node has been created, select the node for which you want t o view information and press Enter . The PNNI Link Confi guration wi ndow is d isplayed ( see Figur e 4-37). Commands The comma[...]

255-700-0 17 4-67 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration [Link V e rsion] (display only ) V ersion1p oint0 Unknown For horizontal and outside links between lo west-level nodes a nd for links of unknown type, this attribute indicates the version of PNNI rou[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 [Re mote Po rt Id] (display only ) (Numeri cal data) Indicates t he port ide ntifier of t he port at the remote end o f the l ink as assigned by the re mote node. If "outsideLinkAndUp link&[...]

255-700-0 17 4-69 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 T o return to the Li nk T able window , Go Back to Previous Screen and press E nter . The Link T able window is disp layed (se e Figure 4-36). End [Common Peer Gp Id] (display only ) (Numeri cal da[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Viewing the PNNI Neighbor Peer T able The PNNI Neighbor Pe er table contains all the attributes necessary to d escribe the relationship a node in the PSAX system has with a ne ighboring node wit[...]

255-700-0 17 4-71 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration The PNNI Neighb or Peer T able window displays the node index and neighbor peer re mote node index for various n eighbo r peers. The PNNI Neighbor P eer Remote Node Id is the node identifie r of the [...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Field Descriptions 5 The values for the fields in this window are describ ed in T abl e 4-19. Command F unction • Go B ack to Previous Screen Displays the PNNI System-Wide Configu- ration wind[...]

255-700-0 17 4-73 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 T o return to the Li nk T able window , Go Back to Previous Screen and press E nter . The Neigh bor Peer T able window is dis played (se e Figure 4- 38). End Viewing PNNI Sys tem Statist ics T o vi[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands in this window have the following functions: Field Descriptions The fields in this w indow are de scribed in T a ble 4-20. Figur e 4-40. PNNI System Statis tics Window Comm[...]

255-700-0 17 4-75 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration T able 4-20. Field V alues for the PNNI System Stat istics Windo w Field Name Description [Dtl Count Originato r] The tota l number of d esignated transit list (DTL ) stacks that the PSAX 1250 system[...]

Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 End [Route Fail Count Org.] The tota l number of time s where the PSAX 1250 system fa iled to compu te a viable DT L stack as the DTL originator for a call. It indica tes the number of times a c[...]

255-700-0 17 4-77 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation Configuring Call Control Resour ce Alloc ation Perform t he step s in the fol lowing proced ure to confi gure the call contro l resour ce alloca tions fo r your Ac cess Conc entra t[...]

Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-7 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands on this window have the following functions: Configuration Guidelines Note: Read the follo wing configuration guidelines before you enter values in the fields.[...]

255-700-0 17 4-79 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation Note: The va lue for svcPointT oMultiPointParties must be grea ter than or equa l to the value for svcP ointT oMultiP ointCalls , because each point -to-multipoin t call mus t have [...]

Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 spvcC ePointT o PointCal ls Default: 002 000 The total number o f circuit emulation point-to -point calls t o be suppor ted by the PSA X system. spvcT ePointT o PointCal ls Default:[...]

255-700-0 17 4-81 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation 4 T o apply t he values you have en tered, sel ect the Apply Configuration command and pre ss Enter . Once you modify a configuration and click Apply , the changes are temporaril y [...]

Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 En d Saving the Configuration and Rebooting the System Perfor m the steps in the follo wing pr ocedure to s ave the va lues you ha ve s et, and r eboot the A ccess Concen trato r sy[...]

255-700-0 17 4-83 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation The Remote Re boot Configura tion window is displayed (se e Figure 4-44) . 6 Select the Reboot Chassis c ommand and pres s Enter . The C PU modu le(s) , and I /O and server modules [...]

Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 ! CAUTION: If you lose p ower or your curr ent session ends abnormally while you ar e in t he pr ocess of configuring the system, and you have not yet saved the values permanently ,[...]

Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 255-700-0 17 5-1 5 Using System Diagnostics Overview o f This Chapter The PSAX s ystem diagnostics functions gi ve you the ability to: • V iew the status of the PS AX system inc luding: ~ V ersion of the PSAX system software currently running ~ Status of the hard disk on the CPU ~ Stati[...]

Chapter 5 Using System Di agnostics Viewin g System Status 5-2 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The Diagno stics Men u window is dis played (s ee Figure 5 -2). Figur e 5-1. Console In terface Main Menu Window (Diagno stics Option Selected) Figur e 5-2. Diagnostics M enu Window[...]

255-700-0 17 5-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Viewi ng System Statu s 2 Select the System Information optio n and press En ter . The System Informati on window is displayed (see Figure 5-3 ). Commands The commands on this window have the following functions: Field Descriptions The [...]

Chapter 5 Using System Di agnostics Viewin g System Status 5-4 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 T able 5-1. Field V alues for th e System Inform ation Window Field Name Descr iption [Softw are V ersion] (display only ) The ver sion of the system software currently running on the CPU. [Current Time ] (display [...]

255-700-0 17 5-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Di agnostics End Running C ell T est Diagnostics T o determine whethe r a port is operating correctly , perf orm the steps in the following procedure . Cell Test Diagnostics Begi n Runnin g Cell T ests 1 On the Conso[...]

Chapter 5 Using System Di agnostics Running Cell T est Diagnostics 5-6 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The Cell T est Diagnosti cs window is disp layed (se e Figure 5-4 ). Commands The commands on this window have the following functions: Field Descriptions 3 T o se t up a connection for the port y ou want t[...]

255-700-0 17 5-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Di agnostics 4 Select the Apply Test Parameters command and press Enter . T able 5-2. Field V alue s for the Cell T est Diagnostics Window Field Nam es V alues Description Slot Ra nge: Th e total number of slots in t[...]

Chapter 5 Using System Di agnostics Running Cell T est Diagnostics 5-8 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The Cell T est Payload Configuration w indow is displa yed (see Figure 5-5). Commands The commands on this window have the following functions: Figur e 5-5. Cell T est Payloa d Configuration Win dow Command[...]

255-700-0 17 5-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Di agnostics Field Descriptions 5 Select the values for the fields on this window from the va lues given in Ta b l e 5 - 3 . 6 Select the first line in the Transmitted Payloa d field and enter numbers in any sequence[...]

Chapter 5 Using System Di agnostics Rebooti ng PSAX Hardwa re Compo nents 5-1 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 7 Select the Refresh Transmit Payload command and press Enter . This comma nd applies the values for the test payload. 8 Select the Send Payload Once or the Send Payload Continuously command and p[...]

255-700-0 17 5-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Rebooting PSAX Hardwa re Comp onents 3 Select one o f the commands shown in the follow ing table as ne eded and press E nter . Figur e 5-6. Remote Reboot Configuratio n Window[...]

Chapter 5 Using System Di agnostics Removin g Configuration File s 5-1 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 En d Removing Con figuration Files T o remove configuration files, use the steps in the follo wing procedure, starting a t the Conso le Interface Main Menu wind ow (see Figure 5-1). Command F unction •[...]

255-700-0 17 5-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Unlock ing a T eln et Sessi on Removing Configuration Files Begi n Removing Config uration Files 1 On the Console Interfa ce Main Menu window , s elect the Diagnostics option and press Enter. The Diagno stics Men u window i s displayed[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 4 T ype the I P address of the PSAX 1250 system that is connected to th e locked-up telnet sessio n in the IP Address field, and press En ter . 5 Select the Unlock Remote Shell comma[...]

255-700-0 17 5-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) • The firs t port is ass igned to the near -end user . • The second port is assigned to the far -end user , using the same configuration as the first port. Begi n Creatin g an OAM C[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 2 On the Connection Configuration window , select the Circuit Emulation-to-ATM VCC configuration and p ress Enter . The Ci rcuit Emulat ion-to A TM VC C PVC T a ble Window is displ a[...]

255-700-0 17 5-17 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Note: At the time of initial insta llation, the Circuit Emulation-to-A TM VCC PV C T able window is empty . After you have set up connections, this window displays all the connections o[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Display Fields The display fields on this window provide the following inform ation about all the circuit emulation-to-A TM VCC PVC connections in t he Access Concen trator s ystem: [...]

255-700-0 17 5-19 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Commands The commands on this window have the following functions: Field Descriptions 4 Select the values for the fields on this window from the values given in Ta b l e 5 - 4 . Figur e[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 T able 5-4. Fie ld V alues for the Cir cuit Emulation-to-A TM VCC PVC Conne ction Window Field Nam es V alues Description Circuit Emula- tion Int erface The circuit emulation side of[...]

255-700-0 17 5-21 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Vo i c e Compre ssion None (default), G726-16k, G726-24k, G726-32k, G726-40k, G729a-8k If you want data traffic f or this connec- tion to be processed t hrough th e DSP2A,DSP2B , or DSP[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Conformance Ty p e The type of traffi c control option used for A TM cell s. The traff ic descriptor combination specifies which tra ffic parameters are used fo r traffic cont rol, d[...]

255-700-0 17 5-23 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Servi ce T ype Ubr (defau lt) Vbr-nrt2, Vbr-nrt1, Vbr -rt 2, Vbr -rt 1, Vbr-expres s Cbr -4, C br -3, Cbr -2, C br -1 Access Con centrato r system-s upported quality of ser vice (QoS) c[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 5 In the Circuit Emulation Interface section of the window , add the the slot, port , and channel designat ions for the ne ar end user from your circuit emulation module. 6 In the A [...]

255-700-0 17 5-25 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Commands The commands on this window have the following functions: Field Descriptions The values for the fields on this win dow are described in T able 5-5 . Figur e 5-12. Circuit Emu l[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Slot V a riable depending on the chas sis type Enter the slot numb er containing the module for which you are creating a connection. Enter slot numbers for both sides of the connecti[...]

255-700-0 17 5-27 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Note: T o vie w statist ics for the fa r end user , select Display Stats for Next Connection . The Circuit Emulatio n-to-A TM VCC PVC Statistics windo w is displayed with statistical in[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Commands The commands on this window have the following functions: Field Desciptions 3 Se lect the val ues from the fields on this window from T able 5-6. Figur e 5-13. OAM Loopback [...]

255-700-0 17 5-29 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) 4 Select the Apply Configuration command and press Enter . En d OAM Activation and Deactivati on The OAM Activate and Deactivate option can perform continuity checks on the circuit runn[...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-3 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Activating and Deactivating O AM Begi n Activa ting or De activatin g OAM 1 On the Console Interfa ce Main Menu window , select the Diagnostics option and press Enter. The Diagno sti[...]

255-700-0 17 5-31 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) T able 5-7. Fie ld V alues for the OAM Ac tivation-Deact ivation Window Field Na me V alu es Descript ion Connectio n Interface Panel Slot Default: 0 The module slot number of the A TM [...]

Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-3 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 4 T o begin the test , select the Activate command a nd press Enter . 5 T o terminate the test, select the Deactivate command and press Enter . End OAM Function Ty p e Default: Conti[...]

Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 255-700-0 17 6-1 6 Using VT100 T erminal Emulation VT100 terminal emula tion is used in configuring and managing the PSAX 1250 system fro m the serial interface port labeled CONSOLE on the faceplate . The PSAX 1250 Access Concentrator system software suppor ts t he following terminal emul[...]

Chapter 6 Using VT100 T erminal Emulati on Setting Up The Windows 95 Hyp erT erminal Emulator 6-2 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 8 Select OK . 9 Return to t he Settings Me nu. 10 From the Set tings Menu, sel ect the Communications option. 11 Select the settings in T able 6-2 for each option. 12 Select OK . [...]

255-700-0 17 6-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 6 Using VT100 T e rminal Emulation Other Software for VT 100 T ermi nal Emulati on Other Software for VT100 T erminal Emulation The console interface support s the standard VT100 term inal emulator configuration. When using various type s of worksta tions or other[...]

Chapter 6 Using VT100 T erminal Emulati on Setting Up a U.S. Robo tics-Compatible M odem 6-4 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Setting Up a U.S. Ro botics-C ompatible Modem T able 6 -5 shows the list of comma nds to confi gure the mode m on your computer to the PSAX 1250 for interoperabilit y . W ARNING: ! Set[...]

Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 255-700-0 17 7-1 7 Upgrading and Backing Up AC System Softwar e Overview o f This Chapter This chapter des cribes how to upg rade, back up, and r estore the Access Concentr ator syste m software an d firmware . Note: If the syst em software releas e to which you are upgr ading requires a[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-2 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 ~ Restoring database fil es using XMod em/YMod em file transfe r (see ”Restoring Database File s Using XMod em/YMode m File T ransfer” on page 7- 34) Dire ctory Structur es In DOS enviro[...]

255-700-0 17 7-3 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter ~ Perfor ming the downl oading of the softwar e upgrade fi les to the CPU module hard disk • If you are using the XMode m or YModem fil e transfer method: ~ T ransferrin g the s oftware u[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-4 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Begi n Removing Old SIMM s on a CPU Module ! CAUTION: Before you begin, place a grounding wri st st rap on your wrist a nd attach the grounding connector to a gr ounded metal object. When re[...]

255-700-0 17 7-5 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter notch on the left side. The SIMM is aligned properly only when the notches on the SIMM ma tch the corr esponding tabs on the slot. 1 Hold the SIMM so that its notche s align correctly with [...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-6 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 • Serv-U fr om http://www .ca t-soft.com • Wftpd23 4 from http://www .shar eware.com I f y o u p l an to us e a s h a r e w a r e p r o g r a m , yo u a r e re s p o n s i b l e fo r f o[...]

255-700-0 17 7-7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter Begi n Upgrading Syst em Software Usin g F TP 1 From the Console Interf ace Main Menu window (see Figure 7-4), select the Software V ersion Configuration option and press Enter . Figur e 7-[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-8 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Software V er sion Configuration window (see Figure 7-5) is displayed. 2 Select the F TP S oftware Release D istribut ion option and press E nter . The SRD Download Configura tion window[...]

255-700-0 17 7-9 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter Commands The commands on the SRD Download Configuraton window have the following functions: Field Descriptions 3 Select the values for the fields on this window from the va lues given in Ta[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-1 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 4 After entering the values in the SRD Download Configuration window , complete the do wnload by compe ting these steps: 5 Select the Start SRD Downloa d command and pr ess Enter . The Co[...]

255-700-0 17 7-11 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter 8 On the bottom of the window , the following message is displayed: Are you sure that you want to upgrade t he software? (y/n) 9 Ty p e y to continue the upgr ade pro cess. The following m[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Using XModem/YM odem File T ransfer Method 7-1 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 any way hinder its capability to ta ke over the role of primary CPU on the event of the pr imary CPU module faili ng. If CPU module switchov er occurs when the[...]

255-700-0 17 7-13 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgradin g Using XMod em/YModem File T ransfer Method 4 Using the terminal emulator modem communication function, e nter the telephone number of the line connected to the modem connected to the Access Co ncentrator [...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Using XModem/YM odem File T ransfer Method 7-1 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Note: For t he upgr ade softw are proc ess, us e only t he Receive Options panel. Commands The commands on this window have the following functions: Field Desc[...]

255-700-0 17 7-15 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgradin g Using XMod em/YModem File T ransfer Method T able 7-2. Fie ld V alues for the XMODEM/YMO DEM File T ransfer Window (Receive O ptions Panel)—Upgra ding with Softwa re Rele ase Files Field Nam es V alues [...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Using XModem/YM odem File T ransfer Method 7-1 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Note: W e recommend that you use eith er the YMo dem or the YModem- G protocol . Use the XM odem protoco l if that is the only one you have available to use. ~[...]

255-700-0 17 7-17 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgradin g Using XMod em/YModem File T ransfer Method out of view . A message is displayed indicating that yo u can cancel the transfe r by pressing Ctrl+X seve ral times. A second message is displa yed indicating t[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Firmwar e 7-1 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The following events occu r during th e final stage of the upgrade process: ~ In an Access Concentrato r syst em with redundant (two) CPU modules, the following events occur: • The softwa re[...]

255-700-0 17 7-19 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgrading Firmware Firmwar e Drivers The firmware driver is a binary file that is a utomatically downloaded from the syst em softwa re resid ent on the CPU mo dule to the I/O module or server , and is used to initia[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Firmwar e 7-2 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 • If you selec t the no ndef ault d river o n the F irmw are V ersion C ontro l window , and you upgrade the system software to a version that has bo th types of dr ivers, the syst em will u[...]

255-700-0 17 7-21 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgrading Firmware The Softwa re V ersion Configur ation wind ow (see Figur e 7-11) is displayed. 2 Select the Firmware V ersion Control optio n. Figur e 7-11. The Softwar e V ersion Configuration Wind ow (Firmwar e[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Firmwar e 7-2 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Firmwar e V ersio n Control windo w (see Fi gure 7-12) is displayed. Commands The commands in this window have the following functions: Field Descriptions The read-onl y fiel ds in this wi[...]

255-700-0 17 7-23 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgrading Firmware 3 Under the Nex tV er sion field, select the driv er that repres ents the version of the firmwar e you want to download onto the module, and press Enter . Pressing Enter displays the next availabl[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Falli ng Back to the Pr evio us Softwar e Rel ease 7-2 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 download time, you must select the Start Upgra de command on the Firmw are V ersion Co ntrol window . ~ If you wish to insta ll an I/O or server module other than[...]

255-700-0 17 7-25 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Fallin g Back to th e Pre vious So ftwar e Relea se The Softwa re V ersion Configur ation wind ow (see Figur e 7-13) is displayed. 2 Select the Fallback to P r evious V ersion option and pres s Enter . The following[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Backin g Up Syst em Datab ase Files 7-2 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Backing Up Sys tem Database Files W e recommend that y ou back up your system, module, and co nnection configuration databa se files to a storage medium se parate from the hard [...]

255-700-0 17 7-27 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Backing Up Sys tem Database Files Backing Up Database Files Using FTP Begi n Steps to Back Up Data base Files Using F TP 1 Conne ct a standa rd 10Base-T Etherne t cable to the Ethern et port on the primary CPU modul[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Backin g Up Syst em Datab ase Files 7-2 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 18 Ty p e <bye> and press Enter . En d Backing Up Database Files Using XModem/YModem File T ransfer Y ou can use the XModem/YM odem file transfer option to copy the Access[...]

255-700-0 17 7-29 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Backing Up Sys tem Database Files Copying the Database Files to a Storage Medium Begin Steps to Copy Database Files to a Storage Medium 1 Using the ter minal emulator , log on the Access Concentrator sy stem. 2 On t[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Backin g Up Syst em Datab ase Files 7-3 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The XMODEM /YMODEM File T ransfer window (see Figure 7-1 5) is displayed. Note: For the database file transfer process, use only the Send Options panel. Commands The commands on[...]

255-700-0 17 7-31 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Backing Up Sys tem Database Files 5 Select the SendFiles command and press Enter . The terminal emulator displaying t he Access Concentrat or system interface window scrolls the XMODEM/ YMODEM File T ransfer window [...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-3 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Be sure yo u enter the filename of the database fi le exactly so that it matches the name you previously e ntered on the Access Concentrator system XMODEM /YMODEM File T ra nsfe[...]

255-700-0 17 7-33 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Rest oring System Data base Files Restoring Database Files Using F TP T o rest ore databa se files from a separate s torage medium us ing F TP , perfor m the steps in the following procedur e. Restoring Database Fil[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-3 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 15 Ty p e <put eventmgr.cfg> and p ress E nter . 16 If you have SVCs configured on your system, type < put ii sp.cb r> and press E nter . 17 If you have SVCs configu[...]

255-700-0 17 7-35 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Rest oring System Data base Files • Second, you pe rform the file transfer (cop y) process for the backup database f iles to the Access Concentra tor system (se e the procedure , ”Steps to Copy Databas e Files t[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-3 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 2 On the Console Inte rface Main M enu win dow (see F igure 7-4 on page 7-7) , select the Software V ersion Configuration optio n and press Enter . The Software V ersion Configu[...]

255-700-0 17 7-37 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Rest oring System Data base Files Field Descriptions 4 Select the values for the fields on this window from the va lues given in Ta b l e 7 - 5 . Note: W e recommend that you use eith er the YMo dem or the YModem- G[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-3 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 ~ The YMode m-G protocol allo ws the fastest transm ission of the thre e types; however , t his protocol does not acknowledge receipt of packets. Y o u can receive all files gro[...]

255-700-0 17 7-39 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Rest oring System Data base Files Rebooting the AC System Begi n Steps to Reboot the Access Concentrato r System 1 Redispla y the Co nsole Int erface Ma in Menu window (s ee Figure 7-4 on page 7-7) . 2 On the Consol[...]

Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-4 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0[...]

255-700-0 17 A-1 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 A SNMP T rap Messages This appendix d escribes the SNMP tra p and notification mes sages generated by the Access Concentrator Co nsole Inter face system SNMP agent. Exter nal SNMP managers ca n perform various functions in the Access Co ncentrator system, a nd can receiv [...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The T rap Log D isplay window is displaye d (see Figu re A-2) . T o find a des criptio n of what a trap message means, follow the se steps. 2. Look for the messa ge that you want information about in T able A-1[...]

255-700-0 17 A-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s cardType , cardProtectionStatus , and cardOperStatus , which are all enume rated -type objects . T able A-1 lists t he ente rprise-spec ific trap n ames and tra p numbers in the four gr oups of ent erprise ob [...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 31 pnniNodeCfgN otify 32 pnniNodeCfgFa ilNotify 33 pnniNodeMod FailNotify 34 pnniNodeD elFai lNotify 35 pnniNodeO OSFailNot if 36 pnniNodeISFai lNotify 37 pnniRtA ddrCfgNotif y 38 pnniRtA ddrCfgFailNo tify 39 p[...]

255-700-0 17 A-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s 11 bridgeDomainNumberInvalidNotify 12 signalingModify FailNotify 13 lmiIntfStatusNotify 14 isdnLapdDo wnNotify 15 isdnLapdUp Notify 16 bridgeDomainTimingRelationshipNo tify 17 ts16Usage ModifyFai lNotify 18 ce[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 46 viprRout ingT r ap 47 viprVpnTrap 48 viprIpIn tfT rap 49 viprSu bChanT rap 50 viprRtSrv T rap 51 atmS vcIntfLaye r2Up 52 atmS vcIntfLa yer2Dow n 53 apsCon figuration ModifyF ailNotify 54 viprSta tRtT rap 55 [...]

255-700-0 17 A-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s 25 frFrPvc T ea rDownNoti fy 26 ci rEmCi rEmPv cT earDownN otify 27 vbrV brPvcT earDownNoti fy 28 bridgeBr idgePvcReqFailNo tify 29 bridgeBr idgePvcSetupNotify 30 bridgeBr idgePvcT ea rDownNotify 31 bridgeAtmP[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 60 cirEmAtmSpvcVccT earDownNotify 61 vbrAtmSpv cVccT earDo wnNotify 62 atmSpvcVccT earDownNotify 63 oamT e stReqFailNot ify V irtual Interface Even ts (Enterprise Object Identifie r): 219 vi-Cannot-B e-0 220 vi[...]

255-700-0 17 A-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s T able A -2 on pa ge A-9 prov ides informa tion abou t the SNMP enterprise - specific trap messages, including the following: • Enterprise-specific trap name • T ype of event that caused the message: a sys[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-10 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 aal2T runkConfig T earDownNotify Connec- tion Respons e aal2TrunkConfigIf aal2T runkConfigVpi aal2T runkConfigVci The PVC V CC AAL2 T runk has been deleted. aal2T runkConfig Setu pNot ify Connec- tion Respons [...]

255-700-0 17 A-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s atmAtmSpvc- Modify FailNo- tify Inter face Info spvcAddrIfA atmAtmSpvcVccVpiA atmAtmSpvcVccVciA atmAtmSp vcVccRe moteAt- mPortA ddr spvcC onfig Failur eCode Notification that an attempt to mo dify a TE SPVC e[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-12 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 atmBk- PvcVp cReqF ail- Notify Connec- tion Response at mPvcVpcIfA atmPvcVpcVp iA atmPvcVpcIfB atmPvcVpcVp iB pvcF ailureRe asonCo de The DHPVC VPC backup connection request between an A TM interface and an A [...]

255-700-0 17 A-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s atmPvcVccSetup Notify Connec- tion Response at mPvcVccIfA atmPvcVccVpiA atmPvcVccVciA atmPvcVccIfB atmPvcVccVpiB atmPvcVccVciB The PVC VC C con- nection between two A T M interf aces has been creat ed. atmPvc[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-14 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 atmSpvcMo dify- FailNotify Interface Info atmSpvcVccIfA atmSpvcVccVpiA atmSpvcVccVciA spvcC onfig Failur eCode Notification that an attempt to mo dify a TE SPVC endpoint has failed. atm- SpvcVccSetUp- Notify C[...]

255-700-0 17 A-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s bridgeAtmBk- PvcVccT ear- DownNotify Connec- tion Response br idgeAtmPvcVccI fA bridgeAtmPvcVccI fB bridgeAtmPvcVccV piB bridgeAtmPvcVccVciB The DHPVC VCC backup connection between a bridge interface and an A[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-16 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 bridgeDomain- Full Noti fy Interface Info bridgeDomainNumber The 15 ports avail- able for the bridge domain are being used, leaving no space for an ad di- tional p ort. bridgeDomain- InService Notify Inter fac[...]

255-700-0 17 A-17 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s ceServiceT ype- Modify FailNo- tify Interfa ce Info portId interface FailureReasonC ode Indicates that config- uring unstructured CE failed. Possib le reasons: (1) The port has been channelized (2) The port h[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-18 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 cirAtmSpvc- Modify FailNo- tify Inter face Info spvcAddrIfA cirAtmSpvcVccRemote- CePor tAddr spvcC onfig Failur eCode Notification that an attempt to mo dify a CE SPVC endpo int has failed. cirAtm- SpvcVccSetU[...]

255-700-0 17 A-19 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s cirEmAt- mPvcVccReq- FailNotify Connec- tion Response cirEmAtmPvcVccIfA cirEmAtmPvcVccIfB cirEmAtmPvcVccVpiB cirEmAtmPvcVccVciB pvcF ailureRe asonCo de The PVC VC C con- nection request between a circuit emul[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-20 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 cirEmSpvcCon- figFailN otify Interfa ce Info interfaceIndex spvcC onfig Failur eCode Notification that an attempt to configur e an endpoint as CE SPVC en dpoint ha s failed. cirEmSpvcCon- fig ured Noti fy Inte[...]

255-700-0 17 A-21 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s differ entSystem- Soft wareN otify Syst em Critic al pr imarySo ftwareV ersion bac kupSoftw areV er sion Indicates that the primar y and backup CPU m odul es are running different ver si ons of sof twa re . T[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-22 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 frAtmB k- PvcVccSetupNo- tify Connec- tion Response f rAtmPvcVccIfA frAtmPvcVccDlciA frAtmPvcVccIfB frAtmPvcVccVpiB frAtmPvcVccVciB The DHPVC VCC backup connection betwee n a fr ame relay interface and an A TM[...]

255-700-0 17 A-23 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s frFrP vcT ear- DownNotify Connec- tion Respo nse frFrP vcIfA frFrPv cDlciA frFrPv cIfB frFrPv cDlciB The PVC connection between two frame- relay in terface s has been del eted. frAtmSpvcC on- fig FailN otif y[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-24 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 imaGrpChan- nelCle aredNo- tify Interfa ce Info imaGrpChannelId imaGrpChanne lStatus The imaGrpChan- nelClearedNotify trap indicate s a fail- ure has been cleared in an IMA group. The imaGrpChan- nelStatus fi [...]

255-700-0 17 A-25 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s interfaceC reat- edNot ify Interfa ce Info interfaceIndex interfaceT ype Notification that an interfa ce has be en created. interfaceC reate- FailNotify Interfa ce Info interfaceIndex interfaceT ype interface[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-26 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ipAtmApp- PvcVccSetupNo- tify Connec- tion Response ip AtmAppPvcVccDest AddrA ipAtmAppPvcVccSubnet- MaskA ipAtmAppPvcVccIfB ipAtmAppPvcV ccVpiB ipAtmAppPvcVccVciB The PVC VC C con- nection between in- band man[...]

255-700-0 17 A-27 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s isdnLapd UpNo- tify Interfa ce Info interfaceIndex isdnIntfDChanId This trap indicates that LAPD is func- tional o n the speci- fied ISDN interface . keepA liveT imer- ExpiredInLl- DownState Notify System Maj[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-28 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 lmiDlciStatus- Notify Connec- tion Respo nse interfaceI ndex d1ci Numbe r lmiDlciOperStatus Indicates the end-to- end s tatus of the PVC of which t his DLCI is a segme nt . lmiIntfStatusNo- tify Interfa ce Inf[...]

255-700-0 17 A-29 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s muxReady Con- firm Rec eive d- Notify System Info < NO OBJECTS > Indica tes that the MUX (the Access Conc entrator sys- tem ) ha s receive d a MUX_ READY_ CONF messag e in re sponse to the MUX_READY_IND[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-30 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 oldStra tum- CardN otify System Critical < NO OBJECTS > This trap indicates that the primary stratu m card doe s not support this mode of op eration being applied in the stratum configura- tion. Card mus[...]

255-700-0 17 A-31 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s pnniN odeMod- FailNotify Syst em Info swtchNodeI ndx pnniC ode Indicates that a PNNI Node Modifica tion has failed. pnniNodeOOS - FailNotify Syst em Info swtchNodeI ndx pnniC ode Indicates that the action o f[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-32 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 pnni RtAd- drModFa ilNotify Syst em Info swtchNodeI ndx interfaceI ndex pnniC ode Indicates that a PNNI Route Ad dress Mod i- fication has faile d. port Modi fyFa il- Notify Modul e Info portId portF ailu reRe[...]

255-700-0 17 A-33 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s snmpCommuni- tyString- sChanged T oPubl icNotify System Crit ical < NO OBJECTS > An error has be en detected in the agt.pty file and the community str ings have be en changed to be public. softw areDow [...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-34 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 tasC mprsAn n- ceNotify System Info tasCmp rsAnnceReasonCode Indicates the result of the requested compress announce- ment op eration. tasT stLineNot ify System Info tasT stLine ReasonCo de Indicat es the re s[...]

255-700-0 17 A-35 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s vbrAtmPvcVc- cReqFailNotif y Connec- tion Respon se vbrAtmPvcVccIf A vbrAtmPvcVcc IfB vbrAtmPvcVcc VpiB vbrAtmPvcVccVciB pvcF ailureRe asonCo de The PVC VC C con- nection request between a variab le- bit rate[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-36 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vbrAtmSpvc- SetU pNoti fy Connec- tion Respons e spvcAddr IfA vbrAtmS pvcRe moteVb rPor- tAddr vbrAtmSpvcIfB vbrAtmSpvcVpi B vbrAtmSpvcVciB Notification that a SPVC connection betwee n TE and A T M endpoin ts [...]

255-700-0 17 A-37 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s vbrSpv cModify- FailNotify Interfa ce Info interfaceIndex spvcC onfig Failur eCode Notification that an attempt to mo dify a TE SPVC endpoint has failed. vbrVbrP vcReq- FailNotify Connec- tion Respo nse vbrVb[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-38 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vi-Alr eady- Exists Connec- tion Info Notification that a virtua l interfa ce assoc iated wit h that numbe r ha s alrea dy been creat ed. vi-Cannot-B e-0 Connec- tion Response Notificati on that VI=0 alr eady [...]

255-700-0 17 A-39 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s vi-Doe s- Not_Exist Connec- tion Response Notificati on that a virtual inte rface con - nection no longer exists. vi-Mod -Limit- Exceeded Indicates that the number of virtual interf aces per car d has be en e[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-40 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vi-OS- Cannot- Be-0 Indicates that the virtua l interfa ce oversubscript ion cannot be 0. Must be at least 1. vi-OS-OOR Indica tes that t he virtua l interfa ce oversubscript ion is not in the ran ge 1- 10. vi[...]

255-700-0 17 A-41 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s vi-Vbr -Bw- Unavailable- Egrs Notification that the request ed amount of egre ss VBR band- width is unavailable for a duplex connec- tion. vi-Vbr -Bw- Unavailable- Egrs -A Notification that the request ed amo[...]

Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-42 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 viprSt atRtT rap Inter face Inf o v iprSlot$ viprRou terId$v ipr- Rout eId$st atRtSt atus Indicat es success/f ail of Stat ic Route oper- atio ns. viprSub - ChanT rap Interfa ce Info viprSlot$v iprRou- terId$v[...]

255-700-0 17 A-43 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps Definitions of MIB Objects Used for T raps The following list contains the de finitions of the M IB objects that are associa ted with the SNMP enterprise -specifi c trap names. This list is pro v[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-44 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 T able A-5. ARP Statu s Codes atmImaIntfInd ex Interf ace index for the atm I ma interfa ce. Number value is interpr eted as an interface of the form, SSPPCCC, where SS is the module slot, PP is t[...]

255-700-0 17 A-45 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps atmPvc VccVciA VCI value for side A of an A TM-to-A TM PVC VCC connection. V alid range is a number be tween 0 and 65 535. atmPvc VccVciB VCI va lue for side B of an A TM-to-A TM PV C VCC connect[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-46 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 bridgeAtmPvcVccIfA Interface ind ex for side A, the bridge side, of a Bridge-to- A T M PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC , where SS is the module[...]

255-700-0 17 A-47 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps cardSlot Physical s lot location. V alid range is a number betwe en 1 and 24. cardType T y pe of module in a physical slot. A specific type of module is associated with each number . V alid range[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-48 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 cellTestIfB Inte rface index used for tes ting cell transf er . Number v alue is interp reted as an interfac e of the form, SSPPCCC , where SS is the module slot , PP is the port number , and C CC[...]

255-700-0 17 A-49 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps cirEmAtmSpvcVccIfB Interfa ce index for side B, the A TM side, of a circuit emulat ion-to-A TM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPC CC, where SS is [...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-50 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 frAtmPvcVccDlciA DLCI value for side A, the frame relay side, of a frame relay-atm PVC VCC connectio n. V alid range is a number between 0 and 1023. frAtmPvcVccIfA Int erface index for side A, the[...]

255-700-0 17 A-51 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps fwRele aseSlot Physical slot location. V a lid range is a number between 1 and 16. imaGrpChann elId Interfa ce inde x - SSPPCCC imaGrpCh annelStatus The return value for the imaGrpC hannelFailNot[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-52 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ firmwareOutO fDate: The firmware for the I/O module does not wor k with this inte rface. ~ ts16Fo rData: ts16 has been se t for pas sing data and the user is attempting to turn on signaling. ~ d[...]

255-700-0 17 A-53 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps interfaceInd ex Interface inde x used for identifcation in tra ps. Number value is interpreted as an interface of the f orm, SSPPCC C, where SS is the module slot, PP is the port number , and CCC[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-54 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ipAtmAppPvcVccIfB Interface index for s ide B, the ATM side, of an in-band m anagement A T M connection. Number value is i nterpreted as an interface of the form, SSPPCCC, where SS is the module s[...]

255-700-0 17 A-55 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps T able A-16. I P T ype Reason Codes isdnIntfDChanId D-Channel Number - if the Dchannel number is 0 no LAPD will run on this PRI -ISD N int erfa ce. line Statu s • Bit map of the sta tus of a li[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-56 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ The fo llowing bit m ap table shows line statuses for the DS1/T1 and Enhanced DS1 modules: ~ The following b it map table shows line statuses for the DS3 module: T able A-17. Enhanced DS1 Line S[...]

255-700-0 17 A-57 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps ~ The following bit map table shows line sta tuses for the Enhanced E1 module: ~ The following bit map table shows line statuses fo r the E3 module: T able A-19. Enhanced E1 Line Status Codes Bit[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-58 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ The following bit map table shows line statuses for t he Ethernet module: ~ The following bit map table sho ws line statuses fo r the OC-3c and STM-1 m odules: ~ The following bit map table sho [...]

255-700-0 17 A-59 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps ~ The following bit map table sho ws line statuses fo r the V oice 2-Wire Station (2W Source) module: lmiDlciOperStatus The operational statu s of the LMI protocol. V alid ran ge is a number betw[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-60 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 oc3A PSK1K2 Rx Rx K1/K2 followed by hex value of K1, K2 oc3A PSK1K2 Tx Tx K1/K 2 followed b y hex value of K1, K2 oc3A PSPai rPor tInde x APS Pair Port index - SSPP oc3A PSPr otect ionLi ne Signal[...]

255-700-0 17 A-61 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps oc3A PSSel ecto rState W : active/standby P: standby/active V a lid range is either the number 1 or 2. See table below fo r a mapping be tween numbers and their enumerate d type. oc3A PSWor king [...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-62 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 oc3PortId inte rface i ndex - SSPP percentComple te Used for the tr ap messa ge fileTransferStatusNotify , a nd the value equals the p ercent of the up grade, downg rade, or F TP do wnload complet[...]

255-700-0 17 A-63 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps portFailureRe asonCode Identification of cause for failure in chan ging the parameters of a port. V alid ra nge is either the number 1 or 2. See tabl e below for a mappi ng between numbe rs and t[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-64 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 9 cantUseSignalingChnlEgrsA2B 10 cantUseS ignalingChnlIgrsB2 A 11 cantUseSignalingChnlEgrs B2A 12 cantUseMa nagementChnlIg rsA2B 13 cantUseMa nagementChnlEgrs A2B 14 cantUseMa nagementChnl IgrsB2A[...]

255-700-0 17 A-65 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps 46 cnctnDataStructure sUnavailable 47 nu llT raffic Paramete rsRej ectedA2 B 48 nu llT raffic Paramete rsRej ectedB2 A 49 vpiW ithinSvcRangeIgrs A2B 50 vpiW ithinSvcRangeEgrsA2B 51 vpiW ithinSvcR[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-66 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 83 scrBandw idthUnavaila bleIgrsB 2A 84 scr BandwidthUnav ailable EgrsB2A 85 pcrBandw idthUnava ilableIg rsA2B 86 pcrBandw idthUnava ilableEg rsA2B 87 pcrBandw idthUnava ilableIg rsB2A 88 pcrBandw[...]

255-700-0 17 A-67 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps 120 interfaceB-NotCir cuitEmulation 121 unrec ognizabl eSilence DetectionM ode 122 un recog nizableE choCan cella tion Mode 123 un recogni zableV oiceCompre ssionMo de 124 interfaceA-NotVbr 125 i[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-68 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 157 unsu pportedFrw dErrCor rectSetti ngs 158 un supp orte dFlow Sett ings 159 frwd ErrCorre ctResource Interna lError 160 uns upported Connect ion 161 ip DestAddr Subnet AInRese rvedLi st 162 ip [...]

255-700-0 17 A-69 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps remoteReboo tReason Code The result o f a remot e rebo ot request . V alid ra nge is a number between 1 and 46. See table be low for a mapp ing between numbe rs and their enumerate d type . 194 b[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-70 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 7 ioCar d7Rebo ot-OK 8 ioCar d8Rebo ot-OK 9 ioCar d9Rebo ot-OK 10 ioCard 10Reboot -OK 11 ioCard 11Reboot -OK 12 ioCard 12Reboot -OK 13 ioCard 13Reboot -OK 14 ioCard 14Reboot -OK 15 ioCard 15Reboot[...]

255-700-0 17 A-71 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps removeCon figFiles Used t o indicate t he status of a remove configuration files request. V alid range is a number between 1 and 4. See table below for a mapping between numbe rs and their enumer[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-72 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 saveConfigurati on ReasonC ode The result o f a save configuratio n request. V alid range is a numbe r betwee n 1 and 14. See table below for a mapping between numb ers and their enumerated t ype.[...]

255-700-0 17 A-73 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps stat RtSt atus Return cod es for Route S erver module sta tic route condititio ns. V alid range is a number between 1 and 18. See table below for a mapping between numbe rs and their enumera ted [...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-74 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 stratumMode Current st atus of the primary S tratum 3– 4 module. V alid rang e is a number betw een 1 and 4. See t able bel ow for a map ping between numbers an d their enumer ated type. subChan[...]

255-700-0 17 A-75 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps T able A-45. T iming Reason Codes upgradeSw CopyStatus Current status o f the ftp softw are upgrade downloa d. V alid range is a number betw een 1 and 5. See t able below for a mapping between nu[...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-76 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vbrAtmPvcVccIfA Interfa ce index for side A, the variable bit rate side, of a variable bit rate - to-A TM PVC VC C connection. Number va lue is interpreted a s an interface of the f orm, SSPPCC C,[...]

255-700-0 17 A-77 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps vbrVbrPvcIfB Interfa ce index f or side B of a varia ble bit r ate-to- variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC , where SS is the module [...]

Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-78 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vpnTrapStatu s Return cod es for Route Server module virtual priva te network (VPN) level operations. V alid range is a number between 1 and 16. See table below fo r a mapping betwe en numbers and[...]

255-700-0 17 B-1 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 B Pin Configurations Overv iew of This Appe ndix This appendix describes the pinout configurations for the connectors on t he PSAX 1250 common e quipment modules. Configuration for the Power Supply Connecto rs AC Power Supply Connector The configuration of the connector [...]

Appendix B Pin Configurations Configura tion for the CPU Connector s B-2 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 -48 V dc Power Supply Module The configu ration of th e connector pins on the - 48 V dc Powe r Supply module facepla te is show n in Figure B-2. T able B -2 describes the pin con figuration fo r the con[...]

255-700-0 17 B-3 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Appendix B Pin Configurations Configuration for the CPU Connectors operation . T able B-3 and T able B -4 describe the pin configurat ion for DB9 connec tors wi th two diffe rent wire coloring scheme s. The SUN Micr osystems wo rkstation (as w ell as other t ypes of w or[...]

Appendix B Pin Configurations Configura tion for the Stratum 3 –4 Connector B-4 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Ether net 10Base-T Interf ace The CPU mod ule faceplat e also accommod ates the Ethe rnet inter face using standard R J-45 pin assig nments. Figure B-3 shows the pin locations for the RJ-45 con[...]

255-700-0 17 B-5 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Appendix B Pin Configurations Configurati on for the Stratum 3– 4 Connector The composite clock signal is a balanced s ignal, which is transmitte d over a shielded twisted pair cable. The cable shi eld is grounded at the composite clock source. T able B-7 de scribes th[...]

Appendix B Pin Configurations Configura tion for the Stratum 3 –4 Connector B-6 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0[...]

255-700-0 17 C-1 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 C Configuring In-Band Management Setting Up In-B and Management C onfiguration Three types of in-band manage ment configurations are ava ilable: • Direct connection configura tion —Connects the network manageme nt system (NMS ) machine, usually a SUN wor kstation, to [...]

Appendix C Configuring In-Band Management Using the Direct Con nection Confi guration C-2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Using the Direct Connection Configuration The default gateway t hrough the in-band network can be configur ed on all Access Conce ntrators with the IP addres s of the NMS machine, or net[...]

255-700-0 17 C-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Dir ect Connecti on Configuration ifconfig fa0 <forecard_Ip_Address> netmas k <Netmask> broadcast <Bcast_address> mtu <Mtu_Size > up wher e, forecard_Ip_Address = the IP address of the FORE card ([...]

Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 AAL= 5 Check whether the connect ions have been configured by using the command atmarp -a 2 A l l th e re m o t e P S A X s y s t e m s ’ i n - b a n d i n t e r f a c e I P ad d r e s[...]

255-700-0 17 C-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration Perform t he step s in the fol lowing pr ocedure to con figure th e routed connection. Steps for Setting Connections for a Routed Connection Begi n Configurati on 1 A Routed Co nnection [...]

Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 PSAX s ystem. The inte rmediate router PS AX sy stem has two types of in- band connections: upstream connections to a router PSAX system and downstream connections to e ither the router [...]

255-700-0 17 C-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration Setting PVC Connections for Routed Connection Configuration Assume that t he VPI:VCI for the conne ction between node A and B is VPIab: VCIab, et c. Also assume that t he Ethernet IP add[...]

Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 4 Configure the pr imary IP Address for in-band management on the CP U module of main route r PSAX system (No de D) using the console interface: Use [Site Specific Configuration]->[In[...]

255-700-0 17 C-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration For setting up an in-band connection from the DS3 card to the CPU module, configure the DS3 card and put it into service. Then, using the console interface [Connection Configuration]->[...]

Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-10 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Slot <Slo t> VP I: VPIcfIP Addr ess: 020.001. 001.004 Port1 VC I: VCIcfI P Mask: 255.2 55.255.000 Channel 1 12 Set up in-band managment connections on the CPU module of Node E: Ex[...]

255-700-0 17 C-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Perform t he step s in the fol lowing proced ure to confi gure a h ybrid connection. Begi n Steps to Setting Connections for Hybrid Con nection Configura tion 1 In the hybrid connection[...]

Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-12 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 4 For all the PSAX systems exce pt the main router PSAX s ystem, the Ethernet interface IP network should be different from the SUN machine’ s Ethernet interface IP network. 5 All of [...]

255-700-0 17 C-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Primar y IP Ma sk: 255.00 0.000.000 2 Configur e the primar y and backu p IP Addr ess for in- band manage ment on the CPU module of the interme diate router PS AX system (Nod e B) using[...]

Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-14 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Port1 VCI: VCIa bIP Mask : 255.000.0 00.000 Channel 1 Slot<Slot> VPI: VPIa cIP Add ress: 020 .001.001.003 Port1 VCI: VCIa cIP Mask: 255.000. 000.000 Channel 1 Slot<Slot> VPI[...]

255-700-0 17 C-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Channel 1 8 V erify that a routing table entry from the SUN machine’ s network to network 20.0.0.0 exis ts on the SUN machine using the netstat - nr command: 9 Use ping, telnet, r log[...]

Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-16 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0[...]

255-700-0 17 D-1 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 D A TM T raf fic Descriptors Overv iew of This Appe ndix This appendix d escribes how each traffic desc riptor affects t he A T M cell streams under different traffic conditions. When you create a PVC, you can select one of severa l traffic descrip tors. The tra ffic desc[...]

Appendix D A TM T raffic Descriptors T raffic Descriptor s Supported D-2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • One bucket , with no tagging for cells with both CLP bit=0 and CLP bit=1 (1B-N T -0+1) This traffic descriptor uses t he par ameters one bucket, no tagging, cell los s priority (CL P)=0+1 cells (high[...]

255-700-0 17 E-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 E Refer ence T ables Overv iew of This Appe ndix This appendix contains reference tables which will be helpful to you in ma ny situations. The information is organized as follows. • QoS Information T ables • Compliance M atrix • Alarm Status T ables • Connection T[...]

Appendix E Reference T ables QoS Information T a bles E-4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 T able 0-2 illust rates t he attrib utes of th e classe s of servi ce suppo rted b y the Access Concentrat or system so ftware . The following two tables il lustrate how A TM classes of service map to internal priority[...]

255-700-0 17 E-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables QoS In formation T ables system. The flexibility of t he Access Concentrator systems allow s the user to tailor the system based on the required se rvice applications and the selection of the a ppropriate priority lev els. T able 0-3. Cell-Los[...]

Appendix E Reference T ables Complia nce Matrix E-6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Compliance Matrix The following table contains compliance specifications for the Access Concentr ator syste ms, and the I/O an d server modules as descr ibed in Ta b l e E - 1 . T able E-1. Compliance Sp ecification s Name P[...]

255-700-0 17 E-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Complia nce Matrix ITU-T G.726 Genera l Aspects of Digital T ransmiss ion Systems T erminal E quipment s: 40, 32, 24, 16 Kbit/s Adaptive Differentia l Pulse Code Modulati on (ADPCM ) V oice comp ression (16, 24, 32, 40 Kbps) a nd tandem encod-[...]

Appendix E Reference T ables Complia nce Matrix E-8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ITU-T I.12 1 Inte grated Services Digital Network (ISDN) General Structure and Service Capa bili- ties: Broa dband Aspects of ISDN ITU-T I.15 0 B-IS DN A TM Functional characteris tics ITU-T I .233 Frame Mo de Bea rer Servi [...]

255-700-0 17 E-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Complia nce Matrix ITU-T I .610 B-ISDN oper ation and mainten ance princi- ples and functions OAM F4/F5 process ing (remote def ect indicat ion [RDI] and alarm indic ation sig- nal [AIS]) ITU-T Q .922 Ann ex A Digital Subscribe r Signaling Sys[...]

Appendix E Reference T ables Complia nce Matrix E-10 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 af-phy- 0086.000 Inverse M ultiplexing over ATM (IMA) U p to 3 groups , with up to six circuits per group af-pnni- 0026.000 Interim I nter-Switch Signaling Protocol (IISP) af-pnni- 0055.000 Private N etwork-Ne twork Inte rfa[...]

255-700-0 17 E-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Alarm Status T able Alarm Status T ab le The Alarm Status field on the Equipment Configuration window displays the current status of all Pa cketStar I/O, s erver , and common equipment module in your PSAX Acce ss Concentrator s ystem. The ala[...]

Appendix E Reference T ables Connect ion T ype by Interface T ype T able E-12 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Connection T ype by In terface T ype T able 4 CardRemoved Al l A module has been configured and th en remo ved. 5 Reference Clock- Failed Stratum The timing reference clock has failed. 6 Com posit eC[...]

255-700-0 17 E-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Connec tion T ype by I nterface T ype T able AT M - t o - AT M virtual p ath connection (VPC) PVC connection X X X X Bridg e-to-A TM VCC PVC con- nection X X X X X Bridg e-to- bridg e PVC connection X Circuit emula- tion-t o A TM VCC PVC con-[...]

Appendix E Reference T ables Interface T ype by Mod ule T able E-14 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Interface T ype b y Module T able T able 0 -7 shows the availa ble interf ace types for each Packe tStar ™ I/O module in the Access Concentrator system. This table does not include other Packe tStar ™ mo d[...]

255-700-0 17 E-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Interface T ype by Mo dule T able module, the DSP2A/B /C V oice Serv er modules, the Route Serv er module, and the T ones and Announcements Server module. T able 0-7. Interface T ypes by I/O Mo dule T ypes A TM IISP (Network/User) AT M I M A [...]

Appendix E Reference T ables Interface T ype by Mod ule T able E-16 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0[...]

255-700-0 17 F-1 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 F Eur opean Community Declarations of Conformity Overv iew of This Appe ndix This appendix contains t he European Community (EC ) Declarations of Conformity for Electromagnetic Compatibility Directives, as applicable to the PSAX 1250 Access Conc entrator .[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 1250 (AC120) A TM Access Concent rator , 19" Chass is; consist ing of the foll owing model numbers: 20S00, 20A04, 20A1[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 1250 (AC120) A TM Access Concent rator , 23" Chass is; consist ing of the foll owing model numbers: 20S10, 20S11, 20A0[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 1250 (AC120) A TM Access Concent rator , 19" Chass is; consist ing of the foll owing model numbers: 20S00, 20A04, 20A1[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 1250 (AC120) A TM Access Concent rator , 23" Chass is; consist ing of the foll owing model numbers: 20S10, 20S11, 20A0[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 2300 / PSAX 1250 CPU Modul e; consis ting of the f ollowing model numbers: 20N20, 20P20, 20P21, 20P22, 20P 23 to which this[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the products : Lucent T echnologies CPU Modul e 32MB Memory Upgrade, model 20A10 Lucent T echnologies CPU Modul e 64MB Memory Upgrade, model 20A12 to which this d[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 1250 Stratum 3-4 Module; consi sting of the following model numbers: 20N05, 21N05 to which this declaration r elates , is i[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 1250 220V AC Power Suppl y , model 20N01 to which this declaration r elates , is in conformity with the following standar d[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 1250 220V AC Power Suppl y , model 20N01 to which this declaration r elates , is in conformity with the following standar d[...]

[...]

EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product: Lucent T echnologies PSAX 2300 -48VDC Power Supply , model 23N11 to which this declaration r elates , is in conformity with the following standar d(s[...]

[...]

[...]

Copyrig ht © 2000 Lucen t T echnologies All rights reserved. Printed in the USA. Part No.: 1250M0A63 01A1 Printed on paper with 100% total recycled content. Please recycl e.[...]