Mercedes-Benz 2008 SLK-Class Bedienungsanleitung

S ommer C orporate M e di a AG Operator’s Manual SLK-Class Order No. 6515 3274 13 Part No. 171 584 97 82 Edition A 2008 SLK-Class 1715849782[...]

SLK 280 SLK 350 S L K5 5A M G[...]

Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demon- stration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and provide years of service. Your Mercedes-Benz represents the efforts of ma[...]

Contents Introduction .......... ........ ......... .......... ..... 9 Product inform ation ......... ............. .......... 9 Operator’s Manual ............. ............. ..... 10 Service and warranty information .. 10 Important notice for California retail buyers and lessees of Mercedes-Benz automobiles .......... 11 Maintenance ............[...]

Contents Safety and Security ..... ........... .......... . 6 3 Occupant safety.................. ......... ........ 64 Air ba gs .......... ........ ........... .......... ... 66 Occupant Classification System ..... 71 Seat belts ......... .......... ........... ......... 76 Children in the vehi cle ....... ............. 79 Panic alarm ...........[...]

Contents Control system ............ ............. ......... 121 Multifunction disp lay ......... ........... 121 Multifunction steerin g wheel ........ 122 Menus ... ........... .......... ........... ....... 1 24 Standard display menu ......... ....... 127 AMG menu ................ ......... .......... 128 AUDIO menu ................ ............[...]

Contents Audio system ......... ............ ........... ..... 193 Audio and telephone*, operation . 193 Operating safety ................... ........ 193 Operating and display elements ... 194 Button and soft key operation ...... 196 Operation ........... .......... ........... ..... 196 Radio operation ..... .......... ............. 199 Introduct[...]

Contents At the gas station .. ................. ........... 291 Refueling ......... .......... ........... ........ 291 Check regularly and before a long trip.... .......... .......... ........... ..... 29 2 Engine compart ment ............ ............ . 294 Hood .............. .......... ........... ........ . 294 Engine oil ... ............ ...[...]

Contents Replacing wiper blad es ...... ............. ... 406 Placing wiper arms in vertical position ............ ............ ........... ..... 406 Removing wiper blades ................ 407 Installing wiper bl ades ....... ........... 40 7 Flat tire ....... ........... .......... ........... ....... 40 8 Preparing th e vehicle ............. ....[...]

9 Product information 왔 Introduction Product information Please observe the following in your own best interest: We recommend using Genuine Mercedes-Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for [...]

10 Introduction Operator’s Manual This Operator’s Manual contains a great deal of useful information. We urge you to read it carefully and familiarize yourself with the vehicle before driving. For your own safety and longer service l ife of the vehicle, we urge you to follow the instructions and warnings contained in this manual. Ignoring them [...]

11 Introduction Operator’s Manual Important notice for California retail buyers and le ssees of Mercedes-Benz automobiles Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price or lease price, if Mercedes-Benz USA, LLC and/or its authorized repair or service facilities fail to fix one or more s[...]

12 Introduction Operator’s Manual Maintenance The Maintenance Booklet describes all the necessary maintenance work which should be performed at regular interv als. Always have the Maintenance Booklet with you when you take the vehicle to an authorized Mercedes -Benz Center for service. The service advisor wil l record each service in the booklet [...]

13 Introduction Operator’s Manual Operating your vehicle outside the USA or Canada If you plan to operate your vehicle in foreign countries, please be aware that: 앫 service facilities or replacement parts may not be readily available, 앫 unleaded gasoline for vehicles with catalytic converters may not be available; the use of leaded fuels will[...]

14 Introduction Where to find it This Operator’s Manual is designed to pro- vide comprehensive su pport information for you, the vehicle operator. Each section has its own reference color. At a glance Here you will find an overvi ew of all the controls that can be operated from the driver’s seat. Getting started Here you will find all the infor[...]

15 Introduction Symbols 왔 Symbols Trademarks: 앫 ESP ® is a registered trademark of DaimlerChrysler. 앫 HomeLink ® is a registered trademark of Prince, a Johnson Controls Company. 앫 SIRIUS and related marks ar e trade- marks of SIRIUS Satellite Radio Inc. The following symbols are found in this Operator’s Manual: * Optional equipment is i[...]

16 Introduction Operating safety Proper use of the vehicle Proper use of the vehicle requires that you are familiar with the following information and rules: 앫 the safety precauti ons in this manual 앫 the “Technical data” section ( 컄 page 436) in thi s manual 앫 the traffic rules and regulations 앫 the motor vehicle laws and safety stan[...]

17 Introduction Problems with your vehicle 왔 Problems with your vehicle If you should experience a problem with your vehicle, particularly one that you believe may affect its safe operation, we urge you to immediately contact an authorized Mercedes-Benz Center to have the problem diag nosed and corrected if re quired. If the matter i s not handle[...]

18 Introduction Reporting safety defects For the USA only: The following text is published as required of manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant t o the “National Traffic and Motor Vehicle Safety Act of 1 966”. Reporting safety defects If you believe that your vehicle has a defect which could cause a c[...]

19 Introduction Vehicle data recording 왔 Vehicle data recordi ng Information regarding electronic recording devices (Including notice pursuant to California Code § 9951) Please note that your vehicle is equipped with devices that can record vehicle systems data and, if equipped with the Tele Aid* system, may transmit some data in certain acciden[...]

20[...]

21 At a glance Exterior view Cockpit Instrument cluster Multifunction steering wheel Center console Overhead control panel Storage compartments Door control panel[...]

22 At a glance Exterior view[...]

23 At a glance Exterior view Item Page 1 Trunk Opening the trunk 99 Closing the trunk 100 Spare wheel 392 Vehicle tool kit 389 2 Rear lamps 400 3 Rear window defroster 170 4 Fuel filler flap 291 Refueling 291 Gasoline 454 5 Doors Locking and unlocking 94 Opening 98 Locking/unlocking in an emergency 394 Item Page 6 Towing 428 Installing towing eye b[...]

24 At a glance Cockpit[...]

25 At a glance Cockpit Item Page 1 Automatic transmission*: Steering wheel gearshift control* 163 2 Multifunction steering wheel 28, 122 3 Horn 4 Instrument cluster 26, 118 5 Overhead control panel 31, 116 6 Glove box 253 CD changer* 216, 253 7 Center console 29, 30 8 Sun sensor for automatic climate control* 9 Starter switch 37 Item Page a Steerin[...]

26 At a glance Instrument cluster[...]

27 At a glance Instrument cluster Item Page 1 Multifunctio n display with: Main odometer 127 Trip odometer 120, 127 Automatic transmission*: Gear range indicator 160 Automatic transmission*: Program mode indicator 161 Outside temperature indicator (or digital speed - ometer when selected) 140 Set speed for cruise control 249 2 Tachometer with: ? En[...]

28 At a glance Multifunction steering wheel Item Page 1 Multifunction display 118 Operating control system 121 2 Selecting a submenu or setting the volume: Press button æ up/to increase ç down/to decrease 3 Telephone*: Press button s to take a call to dial to redial t to end a call to reject an incoming call Item Page 4 Moving within a menu: Pres[...]

29 At a glance Center console 왔 Center console Upper part Item Page 1 Cup holder 255 2 Audio system or COMAND* system (see separate operating instructions) 193 3 AIRSCARF* switch, passenger-side 105 4 Seat heating* switch, passenger-side 104 5 Central unlocking switch 103 6 Hazard warning flash er switch 115 7 Central locking switch 103 Alarm sys[...]

30 At a glance Center console Lower part Item Page 1 Automatic transmission*: Gear selector lever 155, 157 Manual transmission: Gearshift lever 153 2 Retractable hardtop switch 240 3 Tow-away alarm deactivation switch 91 4 Parking brake lever 53, 59 5 Storage/telephone* compartment 253 Item Page 6 Passenger-side exterior rear view mirror button 46,[...]

31 At a glance Overhead control panel 왔 Overhead control panel Item Page 1 Interior lighting on/off 116 2 Interior lighting automatic control switch 116 3 Right reading lamp on/off 117 4 Tele Aid* (emergency call system) button 262 5 Garage door opener* 270 6 Sensor for auto-dimming rear view mirrors* 168 7 Interior rear view mirror 46, 168 8 Mic[...]

32 At a glance Storage compartments[...]

33 At a glance Storage compartments Item Page 1 Glove box 253 2 Door pocket 3 Trunk Vehicle tool kit, jack, spare wheel 389 Luggage cover 241 Trunk load 450 Load limit 309 4 Door pocket 5 Cupholder 255 Item Page 6 Parcel net in passenger footwell 254 7 Ashtray 255 Cigarette lighter 256 8 Storage tray 9 Storage/telephone* compartment 253 a Storage c[...]

34 At a glance Door control panel Item Page 1 Inside door handle 98 2 Power window switch for opening/closing passenger-side window 235 3 Power window switch for opening/closing driver’s side window 235[...]

35 Getting started Unlocking Adjusting Driving Parking and locking[...]

36 Getting started The “Getting started” section provides an overview of the vehicle’s most basic func- tions. First-time Mercedes-Benz owners should pay special attention to the i nfor- mation given here. If you are already familiar with the basic functions described here, the “Controls in detail” section ( 컄 page 93) will provide you [...]

37 Getting started Unlocking 왘 Enter the vehicle and insert the SmartKey in th e starter swi tch. Opening a door causes its window to open slightly. It will fully cl ose when the door is shut. For more information, see “SmartKey” ( 컄 page 94). Starter swit ch positions SmartKey Starter switch 0 For removing the SmartKey The steering is lock[...]

38 Getting started Unlocking For information on starting the engine, see ( 컄 page 51). i When you switch on ignition, t he indicator and warning lamps (except high beam headlamp indicator lamp and turn signal indicator lamps unless activated) in the instrument cluster come on. The indicator and warning lamps (exce pt high beam headlamp indicator [...]

39 Getting started Adjusting 왔 Adjusting Seats The seats can be adjust ed either manually or electrically, depending on the vehicle’s equipment. Wa r n i n g ! G All seat, head restraint, steering wheel, and rear view mirror adjustments, as well as fas- tening of seat belts, must be done before the vehicle is put into motion. War n i n g ! G Do[...]

40 Getting started Adjusting Manual seat adjustment 1 Seat fore and aft adjustment 2 Seat height 3 Seat backrest tilt Wa r n i n g ! G When leaving the vehicle, always remove the SmartKey from the starter switch, take it with you, and lock the vehicle. Even with the SmartKey removed from the starter switch, the power seats* can be op- erated when t[...]

41 Getting started Adjusting Seat fore and aft adjustment 왘 Pull handle 1 . 왘 Slide the seat to the desired position. 왘 Allow handle 1 to reengage with an audible click. 왘 Check for proper engagement before driving. Seat height 왘 Pull or push handle 2 up or down and adjust the seat height until your legs are slightly supported. Seat backr[...]

42 Getting started Adjusting Seat fore and aft adjustment 왘 Press the horizontal switch forward or backward in direction of arrows 1 . Seat height 왘 Press the horizontal switch up or down in direction of arrows 2 and adjust the seat height until your legs are slightly supported. Seat backrest tilt 왘 Press the vertical switch forward or backwa[...]

43 Getting started Adjusting Steering wheel Make sure that 앫 you can reach the st eering wheel with your arms slightly bent at the elbows 앫 you can move your legs freely 앫 all displays (including malfunction and indicator lamps) on the instrument cluster are clearly visible Steering wheel adjustment, manual The steering wheel ad justment rele[...]

44 Getting started Adjusting Steering wheel adjustment, electrical* The steering wheel adjustment stalk is located on the lower left of the steering column. 1 Adjusting steering wheel, in or out 2 Adjusting steering wheel, up or down 왘 Switch on the ignition ( 컄 page 37). or 왘 Open the driver’s door. Adjusting steering wheel in or out 왘 M[...]

45 Getting started Adjusting With the easy-entry/exit feature activated, the steering wheel will return to its last set position when you: 앫 close the driver’s door with the ignition switched on or 앫 insert the SmartKey into the starter switch With the easy-entry/exit feature activated, the steering wheel tilts upwards when you: 앫 remove th[...]

46 Getting started Adjusting Mirrors Adjust the interior and exterior rear view mirrors before driving so that you have a good view of the road and traffic condi- tions. Interior rear view mirror 왘 Adjust the interior rear view mirror manually. For more information, see “Rear view mirrors” ( 컄 page 168). Exterior rear view mirrors Wa r n i [...]

47 Getting started Adjusting The buttons are located on the lower part of the center console. 1 Driver’s side exterior rear view mirror button 2 Adjustment button 3 Passenger-side exterior rear view mirror button 왘 Switch on the ignition ( 컄 page 37). 왘 Press button 1 for the driver’s side exterior rear view mirror or button 3 for passeng[...]

48 Getting started Driving Fastening the seat belts Wa r n i n g ! G Make sure that absolute ly no objects are ob- structing the pedal’s range of movement. Keep the driver’s footwe ll clear of all obsta- cles. If there are any floorm ats or carpets in the footwell, make sure the pedals still have sufficient clearance. During sudden driving or b[...]

49 Getting started Driving 1 Loop for seat belt guidance 2 Latch plate 3 Release button 4 Buckle 왘 With a smooth motion, pull the seat belt from the seat belt outlet. 왘 Place the shoulder portion of the seat belt across the top of your shoulder and the lap portion across your hips. 왘 Push latch plate 2 int o buckle 4 until it clicks. 왘 If n[...]

50 Getting started Driving Proper use of seat belts 앫 Do not twist the seat belt when fastening. 앫 Adjust seat belt so that the shoulder portion is located as close as possible to the middle of the shoulder (it should not touch the neck). Never pass the shoulder portion of the seat belt under your arm. 앫 Position the lap belt as low as possib[...]

51 Getting started Driving Starting the engine Manual transmission Gearshift pattern for manual transmission For more information, see “Manual trans- mission” ( 컄 page 153). Starting 왘 Depress brake ped al. 왘 Make sure the gearshift lever is in neu- tral position (no gear selected). 왘 Fully depress clutch pedal. Otherwise the engine can[...]

52 Getting started Driving Automatic transmission* Gearshift pattern f or automatic transmission P Park position with gear selector lever lock R Reverse gear N Neutr al po siti on D Drive position For more information, see “Automatic transmission*” ( 컄 page 155). Starting 왘 Place the gear selector lever in position P . 왘 Do not depress ac[...]

53 Getting started Driving Parking brake 1 Parking brake lever 2 Release button 왘 Pull up slightly on parking brake lever 1 and press release button 2 . 왘 Push parking brake lever 1 down to its original position. The brake warning lamp ; (USA only) or 3 (Canada only) in the instrument cluster goes out. Driving o ff Wa r n i n g ! G When leaving[...]

54 Getting started Driving Manual transmission 왘 Depress the brake pedal. 왘 Fully depress the clu tch pedal. 왘 Move gearshift lever to first gear to drive forward, or to reverse gear to drive rearward. 왘 Simultaneously release the brake pedal and slowly the clutch pedal. 왘 Carefully depress the accelerator pedal. Automatic transmission* ?[...]

55 Getting started Driving Switching o n headlamps Low beam headlamps The exterior lamp switch is located on the dashboard to the left of the steering wheel. Exterior lamp switch 1 Off 2 Low beam headlamps on 왘 Turn the exterior lamp switch to position B . The low beam headlamps come on. High bea m The combination switch is located on the left of[...]

56 Getting started Driving 왘 Press the combination switch in direction of arrow 1 or 2 . The corresponding turn signal indicator lamp K or L in the instrument cluster flashes ( 컄 page 26) . The combination switch resets auto- matically after major directional chang- es. Windshield wi pers The combination switch is located on the left of the ste[...]

57 Getting started Driving Switching o n windsh ield wipers 왘 Turn the combination switch to the desired position depending on the intensity of the rain. 0 Windshield wipers off I Intermittent wiping II Normal wiper speed III Fast wiper speed Intermittent wiping Vehicles with rain sensor*: Intermittent wiping interval is dependent on wetness of w[...]

58 Getting started Driving Single wipe 왘 Press the combination switch briefly in direction of arrow 1 ( 컄 page 5 8) to the resistance point. The windshield wipers wipe one time without washer fluid. Wiping with windshield washer flui d 왘 Press the combination switch in direc- tion of arrow 1 ( 컄 page 58) past the resistance point. The winds[...]

59 Getting started Parking and locking 왔 Parking and locking You have now completed your first drive. You have properly stopped and parked your vehicle. End your drive as follows. Parking b rake Wa r n i n g ! G Vehicles with manual transmission: Wait until the vehicle is stationary before re- moving the SmartKey from the starter switch. The vehi[...]

60 Getting started Parking and locking 1 Parking brake lever 왘 Pull up parking brake lever 1 firmly. When the ignition is switched on or the engine is running, the brake warning lamp ; (USA only) or 3 (Canada only) in the speedometer dial comes on. Wa r n i n g ! G Getting out of your vehicle with the gear se- lector lever* not fully engaged in p[...]

61 Getting started Parking and locking Switching o ff headlamps 왘 Turn the exterior lamp switch to M ( 컄 page 109). Turning off engine 왘 Manual transmission: Move the gear- shift lever into first or reverse gear. 왘 Automatic transmission*: Place the gear selector lever in position P . 왘 Apply the parking brake ( 컄 page 59). 왘 Turn the[...]

62 Getting started Parking and locking Locking 왘 Exit the vehicle and close all doors. Opening a door causes its window to open slightly. It will fully close when the doo r is shut. 왘 Press the lock button ‹ on the SmartKey ( 컄 page 36). 앫 All turn signal lamps flash three times. 앫 An acoustic warning sounds three times. 앫 The locking[...]

63 Safety an d Security Occupant safety Panic alarm Driving safety systems Anti-theft systems[...]

64 Safety and Security Occupant safety In this section you will learn the most important facts about the restraint system components of the vehicle. 앫 Seat be lts ( 컄 page 76) 앫 Child restraints ( 컄 page 80) Additional protection potential provided by 앫 S upplemental R estraint S ystem (SRS) with 앫 Air bags ( 컄 page 66) 앫 Air bag co[...]

65 Safety an d Security Occupant safety Wa r n i n g ! G Modifications to or work improperly co n- ducted on restraint system s (such as seat belts and anchors, emergency tensioni ng devices, seat belt force limiters or air bags) or their wiring, as well as tampering with in- terconnected electronic systems, can lead to the restraint systems no lon[...]

66 Safety and Security Occupant safety Air bags Wa r n i n g ! G Air bags are designed to reduce the poten- tial of injury in certai n frontal impacts (front air bags, knee bags), or side impacts (head-thorax air bags ) which may cause signific ant injuri es. However, no system available today can completely eliminate injuries and fatalities. The d[...]

67 Safety an d Security Occupant safety 앫 Occupants, especially children, should always sit as upright as possible, proper- ly use the seat belts and use an appro- priately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. Failure to follow thes e instructions can result in severe inju ri[...]

68 Safety and Security Occupant safety Safety guidelin es for the seat belt , emergency tensi oning devi ce and air bag i Air bags are designed to activate only in certain frontal impact s (front air bags, knee bags) and in side impact s (head-thorax air bags) which exceed preset thresholds. Only during these events will they pr ovide their supplem[...]

69 Safety an d Security Occupant safety When you sell your vehicle, we strongly urge you to give notice to the subsequent owner that it is equi pped with an SRS by alerting them to the applicable section in the Operator’s Manual. Front air bags 1 Driver air bag 2 Passenger air bag 3 Knee bag (passenger side) 4 Knee bag (driver’s side) Driver an[...]

70 Safety and Security Occupant safety The air bags will not deploy in impacts which do not exceed the system’s deploy- ment thresholds. You will then be protect- ed by the fastened seat belts. The passenger air bag will only be de- ployed if 앫 the system, based on OCS weight sen- sor readings, senses that the front pas- senger seat is occupied[...]

71 Safety an d Security Occupant safety Occupant Classi fication System The O ccupant C lassification S ystem (OCS) automatically turns the passenger front air bag and passenger-side knee bag on or off based on the classified occupant weight category determined by weight sensor readings from the passenger seat. Occupants must sit properly bel ted i[...]

72 Safety and Security Occupant safety Wa r n i n g ! G If the 75 indicator l amp illumi- nates when an adult or someone larger than a small individual is in the passenger seat, have the passenger re -position himself or herself in the seat until the 75 indicator lamp goes out. More information about air bag display messages ( 컄 page 365). In the[...]

73 Safety an d Security Occupant safety If the 75 indicator lamp is illuminated, the passenger front air bag is deactivated and will not be deployed. If the 75 indicator lamp is not illuminated, the passenger front air bag is activated and will be deployed: 앫 in the event of certain frontal impacts 앫 if impact exceeds a preset deployment thresh[...]

74 Safety and Security Occupant safety The 75 indicator lamp is located in the center console. 1 Passenger front air bag off indicator lamp The 75 indicator lamp 1 will be illuminated, except with the SmartKey removed or in starter switch position 0 . 앫 If you place a child in a forward-facing child restraint on the passenger seat, move the seat [...]

75 Safety an d Security Occupant safety Self-test Occupant Cl assification System After turning the SmartKey in the starter switch to position 1 or 2 , the 75 indicator lamp located in the center console illuminates. If an adult occupant is properly sitting on the passen- ger seat and the system senses the occu- pant as being an adult, the 75 indic[...]

76 Safety and Security Occupant safety Seat belts The use of seat belts and infant and child restraint systems is required by l aw in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Even where this is not the case, all vehicle occupants should have their seat belts fastened whenever the vehicle is in motion[...]

77 Safety an d Security Occupant safety Wa r n i n g ! G Damaged seat belts or seat belts that were highly stressed in a n accident must be re- placed and their anchoring points must also be checked. Only use seat belts which have been approved by Mercedes-Benz. Do not make any modifications to the seat belts. This can lead to unintended activation[...]

78 Safety and Security Occupant safety Enhanced seat belt reminder system When the engine is started, the seat belt telltale < will always illuminate for 6 seconds to remind you and your passenger to fasten your seat belts. If the driver’s seat belt is not fastened when the engine is started, an additional warning chime will also sound for a m[...]

79 Safety an d Security Occupant safety Emergency tensioning device (ETD), seat belt for ce limiter The seat belts are equipped with emergency tensioning devices and seat belt force limiters. The ETD is designed to activate in the following cases: 앫 in frontal or rear- end impacts exceed- ing the system deployment threshold 앫 if the restraint s[...]

80 Safety and Security Occupant safety Infant and child restraint systems We recommend all infants and children be properly restrained at all times while the vehicle is in motion. The passenger lap-shoulder belt has a special seat belt retractor for secure fas- tening of child restraints. To fasten a child restraint follow child restraint instructi[...]

81 Safety an d Security Occupant safety A statement by the child restraint manu- facturer of compliance with these stan- dards can be found on the instruction label on the restraint and in the instruction manual provided with the restraint. When using any infant, or toddler restraint, or booster seat, be sure to carefully read and follow all manufa[...]

82 Safety and Security Occupant safety 앫 If you place a child in a forward-facing child restraint on the passenger seat, move the seat as far back a s possible, use the proper child restraint recom- mended for the age, size and weight of the child, and secure child restraint with the vehicle’s seat belt according to the child seat manufacturer?[...]

83 Safety an d Security Panic alarm 왔 Panic alarm 1 Â button Activating 왘 Press and hold button 1 for at least 1 second. An audible alarm and flashing exterior lamps will operate briefly. Deactivating 왘 Press button 1 again. or 왘 Insert the SmartKey in the starter switch. i USA only: This device complies with Part 15 of the FCC Rules. Oper[...]

84 Safety and Security Driving safety systems In this section you will fi nd information on the following driving safety systems: 앫 ABS (A ntilock B rake S ystem) 앫 BAS (B rake A ssist S ystem) 앫 ESP ® (E lectronic S tability P rogram) ABS The Antilock Brake System (ABS) regulates the brake pressure so that the wheels do not lock during brak[...]

85 Safety an d Security Driving safety systems Braking At the instant one of the wheels is about to lock up, a slight pulsation can be felt in the brake pedal, indicating that the ABS is in the regulating mode. 왘 Keep firm and steady pressure on the brake pedal while experiencing the pulsation. Continuous, steady brake pedal pressure yields the a[...]

86 Safety and Security Driving safety systems BAS The Brake Assist System (BAS) operates in emergency situations. If you apply the brakes very quickly, the BAS autom atically provides full brake boost, thereby poten- tially reduc ing braking distanc e. 왘 Apply continuous full braking pressure until the emergency braking situation is over. The ABS[...]

87 Safety an d Security Driving safety systems For more information, see the “Practical hints” section ( 컄 page 352) and ( 컄 page 363). Wa r n i n g ! G Never switch off the ESP ® whe n you see t he ESP ® warning lamp v flashing in the in- strument cluster. In this case, proceed as follows: 앫 While driving off, apply as little throttl e[...]

88 Safety and Security Driving safety systems Electronic traction system The electronic traction system is a component of ESP ® . The electronic traction system improves the vehicle’s ability to utilize avai lable traction, especially under slippery road conditions by applying the brakes to a spinning wheel. When you switch off the ESP ® , the [...]

89 Safety an d Security Driving safety systems The ESP ® switch is located on the upper part of the center console. 1 ESP ® switch 왘 With the engine running, press ESP ® switch 1 until the ESP ® warning lamp v in the instrument cluster comes on. The ESP ® is switched off. Switching on the ESP ® 왘 Press ESP ® switch 1 until the ESP ® war[...]

90 Safety and Security Anti-theft systems Immobilizer The immob ilizer pre vents unau thorize d persons from starting your vehicle. When leaving the vehicle, always take the SmartKey with you and lock the vehicle. The engine can be started by anyone with a valid SmartKey that is left inside the vehicle. Activating 왘 Remove the SmartKey from the s[...]

91 Safety an d Security Anti-theft systems 왘 Lock the vehicle with the SmartKey. The turn signal lamps flash th ree times and an acoustic warning sounds three times to indicate that the alarm system is armed. Alarm system indicator lamp 1 starts flashing. Disarming th e alarm system 왘 Unlock the vehicle with the SmartKey. The turn signal lamps [...]

92 Safety and Security Anti-theft systems Arming tow-away alarm 왘 Lock your vehicle with the SmartKey. The tow-away alarm is autom atically armed after about 30 seconds. Disarming tow-away alarm To prevent triggering the tow-away alarm, switch off the tow-away al arm feature be - fore towing the vehicle, or when parking on a surface subject to mo[...]

93 Controls in detail Locking and unlocking Seats Memory function* Lighting Instrument cluster Control system Manual transmission Automatic transmission* Good visibility Climate control Automatic climate control* Audio system Power windows Retractable hardtop Driving systems Loading Useful features[...]

94 Controls in detail In the “Controls in detail” section you wil l find detailed information o n how to oper- ate the equipment installed in your vehicle. If you are already familiar with the basic functions of your vehicle, this section will be of particular interest to you. To quickly familiarize yourself with the basic functions of the vehi[...]

95 Controls in detail Locking and unlocking Wa r n i n g ! G When leaving the vehicl e, always remove the SmartKey from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. A child’s unsupervised a ccess to a v ehicle could result in an accident and/or [...]

96 Controls in detail Locking and unlocking Factory setting Global unlockin g 왘 Press button Œ . 앫 All turn signal lamps flash o nce. 앫 An acoustic warning sounds once. 앫 The locking knobs in the doors move up. 앫 The anti-theft alarm system is disarmed. The vehicle will lock again automatically and rearm the anti-theft alarm system withi[...]

97 Controls in detail Locking and unlocking Selective sett ing If you frequently travel alone, you may wish to reprogram the SmartKey so that press- ing button Œ only unlocks the driver’s door, the storage/telephone* compart- ment under the armrest, the glove box, and the fuel filler flap. 왘 Press and hold buttons Œ and ‹ simultaneously for[...]

98 Controls in detail Locking and unlocking Loss of SmartKey or mechanical ke y If you lose a SmartKey or mechanical key, you should do the following: 왘 Have the SmartKey deactivated by an authorized Mercedes-Benz Center. 왘 Report the loss of the SmartKey or the mechanical key to your car insurance company immediately. 왘 If necessary have the[...]

99 Controls in detail Locking and unlocking Opening the tru nk You can open the trunk if the vehicl e is stationary. A minimum height clearance of 5.78 ft (1.76 m) is required to open the trunk lid. 왘 Press and hold button Š on the Smart Key. The trunk is unlocked and opens slightly. 왘 Pull on the handle. 왘 Lift the trunk lid and swing it op[...]

100 Controls in detail Locking and unlocking Closing the trunk 1 Handle 왘 Lower the trunk lid using handle 1 . 왘 Close the trunk lid with hands placed flat on the trunk lid. Wa r n i n g ! G Make sure the trunk is closed when the engine is running and while driving. Among other dangers , deadly carbon monoxide (CO) gases may enter vehi cle inte[...]

101 Controls in detail Locking and unlocking Valet lock ing The lock is located next to the handle above the rear license plate recess. 1 Neutral position 2 Locked 왘 Close the trunk ( 컄 page 100). 왘 Pull the mechanical key out of the SmartKey ( 컄 page 394). 왘 Insert the mechanical key in the trunk lid loc k. 왘 Turn the mechanical key cl[...]

102 Controls in detail Locking and unlocking Trunk lid emergency release With the emergency release button, the trunk can be opened from inside the trunk. 1 Emergency release button 왘 Briefly press emergency release button 1 . The trunk lid unlocks and opens slightly. 왘 Push up the trunk lid to fully open. Illumination of the emergency release [...]

103 Controls in detail Locking and unlocking Locking and unlo cking from the inside You can lock or unlock the doors and the trunk from the inside using the central locking or unlocking switch. This can be useful, for example, if you want to lo ck the vehicle before starting to drive. The central locking switch and central unlocking switch do not l[...]

104 Controls in detail Seats For information on seat adjustment, see “Adjusting” ( 컄 page 39). Seat heating* 1 Seat heating switch 2 Indicator lamps Red indicator lamps 2 on seat heating switch 1 show which heating level you have selected: 왘 Switch on the ignition ( 컄 page 37). Switching on se at heating 왘 Press switch 1 repeatedly unti[...]

105 Controls in detail Seats Lumbar s upport* The curvature of the seats can be adjusted to help enhance lower back support and seating comfort. 1 Upper seat curvature 2 Lower seat curvature 왘 Switch on the ignition ( 컄 page 37). 왘 Turn adjustment wheels 1 and 2 until you have reached the desired seat curvature. AIRSCARF n eck-level heat ing*[...]

106 Controls in detail Seats Red indicator lamps 2 on AIRSCARF switch 1 show which heating level you have selected: 왘 Switch on the ignition ( 컄 page 37). Switching on 왘 Press the AIRSCARF switch 1 for the desired side. All three indicator lamps 2 on respective AIRSCARF switch 1 come on. After a preheating time of approxi- mately 7 seconds, t[...]

107 Controls in detail Memory function* 왔 Memory function* Prior to operating the vehicle, the driver should check and adjust the seat height, seat position fore and aft, and seat back- rest angle if necessary, to ensure adequate control, reach and comfort. The head re- straint should also be adjusted for proper height. See also the section on ai[...]

108 Controls in detail Memory function* Storing positions into memory 왘 Adjust the seat, on the driver’s side also the steering wheel and exterior rear view mirrors, to the desired positions ( 컄 page 39). 왘 Press memory button M . 왘 Release memory button M and press a memory position switch 2 within 3 seconds. All settings are stored to t[...]

109 Controls in detail Lighting 왔 Lighting For information on how to switch on the headlamps and use the turn signals, see “Switching on headlamps” ( 컄 page 55) and “Turn signals” ( 컄 page 55). Exterior lamp switch Exterior lamp sw itch i If you drive in co untries where vehicles drive on the other side of the road than th e country i[...]

110 Controls in detail Lighting Low beam headlamps The low beam headlamps can be switched on and off with the exterior lamp switch us- ing the manual headlamp mode. 왘 Turn the exterior lamp switch to position B . The following lamps switch on: 앫 Low beam headlamps 앫 Tail and parking lamps 앫 License plate lamps 앫 Side marker lamps Automati[...]

111 Controls in detail Lighting Daytime running lamp mode In Canada the daytime running lamp mode is mandatory and therefore in a constant mode. In the USA the daytime running lamp mode is deactivated by default. Activat e the day- time running lamp mode using the control system, see “Setting da ytime running lamp mode” ( 컄 page 143). 왘 Tur[...]

112 Controls in detail Lighting When the engine is running, and you turn the exterior lamp switch to position C or B , the manual head- lamp mode has priority over the daytime running lamp mode. The corresponding exterior lamps switch on ( 컄 page 109). Locator lighting and night secu rity illu- mination The locator lighting and the night security[...]

113 Controls in detail Lighting Rear fog lamp (driv er’s side only) 왘 Turn the exterior lamp switch to position C or B ( 컄 page 109) . 왘 Pull out the exterior lamp switch to second stop. The front fog lamps and the rear fog lamp switch on. The yellow indicator lamp † in the exterior lamp switch comes on ( 컄 page 109). 왘 Push in the ex[...]

114 Controls in detail Lighting Corner-illuminat ing front fog lamps* The corner-illuminating front fog lamps improve illumination of the area in the direction into which you are turning. The corner-illuminating front fog lamps will operate with the engine running and with 앫 the exterior lamp switch in position B ( 컄 page 109) or 앫 the exteri[...]

115 Controls in detail Lighting Switching off corner-illuminating front fog lamps The combination switch for the turn signal resets automatically after major steering wheel movements. This will switch off the corner-illuminating front fog lamps if they where activated by switching on the left or right turn signal. If the turn signal should stay on [...]

116 Controls in detail Lighting Switching on hazard warning flasher 왘 Press hazard warning flash er switch 1 . All turn signal lamps are fl ashing. Switching off hazard warning flasher 왘 Press hazard warning flasher switch 1 again. Interior lighting The controls are located in the overhead control panel. 1 Interior lighting on/off 2 Automatic c[...]

117 Controls in detail Lighting Activating 왘 Press automatic control switch 2 until it is flush to the other switches. The interior lighting switches on in darkness, when you 앫 unlock the vehicle 앫 remove the SmartKey from the starter switch 앫 open a door The interior lighting switches off automati- cally following a preset time delay. For [...]

118 Controls in detail Instrument cluster A full view illustration of the instrument cluster can be found in the “At a glance” section ( 컄 page 26). 1 To brighten instrument cluster illumination (knob + ) 2 To dim inst rument cluster illumination (knob - ) 3 Reset button J The instrument cluste r is activated when you 앫 open a door 앫 swit[...]

119 Controls in detail Instrument cluster Tachomet er The red marking on the tachometer ( 컄 page 26) denotes excessive engine speed. To help protect the engine, the fuel supply is interrupted if the engine is operated within the red marking. Outside temperature indicator The outside temperature is displayed in the multifunction display ( 컄 page[...]

120 Controls in detail Instrument cluster Resetting trip odometer 왘 Make sure you are viewing the standard display menu ( 컄 page 127). 왘 If it is not displayed, press button è or ÿ repeatedly until the standard display appears in the multifunction display. 왘 Press and hold reset button J until the trip odometer is reset. Clock Vehicles wi[...]

121 Controls in detail Control system 왔 Control system The control system is activated as soon as the SmartKey in the starter switch is turned to position 1 . The control system enables you to 앫 call up information about your vehicle 앫 change vehicle settings For example, you can use the control system to find out when your vehicle is next du[...]

122 Controls in detail Control system Multifunctio n steering whe el The displays in the multifunction display and the settings in the control system are controlled by the buttons on the multifunc- tion steering wheel. Depending on the selected menu, pressing the buttons on the multifunction steering wheel will alter what appears in the multi- func[...]

123 Controls in detail Control system It is helpful to think of the menus, and the functions within each menu, as being ar- ranged in a circular pattern. 앫 If you press button è or ÿ re- peatedly, you will pass through each menu one after the other. 앫 If you press button j or k re- peatedly, you will pass through each function display, one af[...]

124 Controls in detail Control system Menus This is what you will see when you scroll through the menus. The table below provides an overview of the individual menus.[...]

125 Controls in detail Control system Menus, submenus and functions Table continued on next page. Menu 1 Menu 2 Menu 3 Menu 4 Standard display AMG 1 AUDIO NAV* ( 컄 page 127) ( 컄 page 128) ( 컄 page 133) ( 컄 page 135) Commands/submenus Run Flat Indicator* (Canada only) or TPMS (USA only) Engine oil temperature Selecting radio station Show rou[...]

126 Controls in detail Control system Menus, submenus and functions Menu 5 Menu 6 Menu 7 Menu 8 Vehicle status message memory 1 Settings Trip com puter TEL* ( 컄 page 135) ( 컄 page 136) ( 컄 page 148) ( 컄 page 149) Commands/submenus Calling up vehicle malfunction, warning and system status messages stored in memory Resetting to factory settin[...]

127 Controls in detail Control system Standard display men u The multifunction display shows the main odometer and trip od ometer. This default setting is referred to as the standard display. 1 Main odometer 2 Trip odometer If another display is shown instead of the standard display: 왘 Press button è or ÿ repeatedly until the standard display a[...]

128 Controls in detail Control system 왘 When in the standard display menu, press button j or k repeatedl y until the coolant temperature appears in the multifunction display. Displaying digital speedometer or outside temperature 왘 Press button j or k repeatedly until the digital speedometer appears in the multifunction display. The current vehi[...]

129 Controls in detail Control system 왘 Use buttons k or j to select the following functions in the AMG menu: Vehicle supply voltage 왘 Press button è or ÿ repeatedly until you see the AMG menu. 왘 Press button j repeatedly until the vehicle supply voltage appears in the multifunction display. 1 Gear indicator 2 Vehicle supply voltage RACETIM[...]

130 Controls in detail Control system 왘 Press button j repeatedly u ntil the RACETIMER appears in the multifunction display. 1 Gear indicator 2 RACETIMER 3 Lap number Starting the RACETIMER 왘 Press button æ . The timer starts. Displaying intermediate time 왘 Press button ç while the timer is running. The intermediate time is shown for 5 seco[...]

131 Controls in detail Control system Saving lap time and s tarting a new l ap 왘 Press button ç while the timer is running. The intermediate time will be shown for 5 seconds. 왘 Press button ç within 5 seconds. The intermediate time shown will be saved as a lap time. The RACETIMER begins timing the new lap. The new lap begins to be timed as so[...]

132 Controls in detail Control system Overall analy sis 왘 Press button è or ÿ repeatedly until the AMG menu appears in the multifunction display. 왘 Press button j repeatedly u ntil the overall analysis appears in the multifunction display. 1 Overall analysis of RACETIMER 2 Overall driving time 3 Maximum speed 4 Overall distance driven 5 Avera[...]

133 Controls in detail Control system AUDIO menu The functions in the AUDIO menu operate the audio equipment which you currently have turned on. If no audio equipment is currently switched on, the message AUDIO OFF appears in the multifunction display. The following functions are available: Selecting radio station 왘 Switch on the radio ( 컄 page[...]

134 Controls in detail Control system Selecting satellit e radio station* The Sirius satellite radio is treated as a radio application. 왘 Select satellite radio with the corre- sponding soft key (SAT) in the radio menu. 1 SAT mode and preset number 2 Channel name or number 왘 Press button j or k repeatedly until the desired channel is found. Ope[...]

135 Controls in detail Control system NAV* menu The NAV menu contains the functions need- ed to operate your navigation system. 왘 Press button è or ÿ repeatedly until you see the message NAV in the multifunction display. 앫 If the COMAND* system is switched off, the message NAV OFF appears in the multifunction display. 앫 With COMAND* switche[...]

136 Controls in detail Control system If conditions have oc curr ed causing status messages to be recorded, the number of messages appears in the multifunction dis- play: 1 Number of recorded status messages 왘 Press button j or k . The stored messages will now be dis- played in the order in which they hav e occurred. For malfunction and warning m[...]

137 Controls in detail Control system 왘 Press the reset button J on the instrument cluster ( 컄 page 26) for approximately 3 seconds. The request to press the reset button J once more to confirm appears in the multifunction display. 왘 Press the reset button J once more. The functions of all submenus will be reset to the factory settings. The m[...]

138 Controls in detail Control system The table below shows what settings can be changed within the various submenus. Detailed instructions on making individual settings can be found on the following pages. Instrument cluster Time/Date Lighting Vehicle Convenience* ( 컄 page 139) ( 컄 page 141) ( 컄 page 143) ( 컄 page 146) ( 컄 page 147) Sele[...]

139 Controls in detail Control system Instrument cluster submenu Access the Instr. Cluster submenu via the Settings menu. Use the Instr. Cluster submenu to change the instrument cluster display settings. The following functions are available: Selecting digital speedometer display mode 왘 Move the selection marker with button æ or ç to the Instr.[...]

140 Controls in detail Control system Available languages: 앫 German 앫 English 앫 French 앫 Italian 앫 Spani sh 앫 Dutch 앫 Danish 앫 Swedi sh 앫 Portuguese 앫 Turkish Selecting display (speed display or outside temperature) for status indicator 왘 Move the selection marker with button æ or ç to the Instr. Cluster submenu. 왘 Press b[...]

141 Controls in detail Control system Time/Date submenu Access the Time/Date submenu via the Settings menu. Use the Time/Date sub- menu to change the instrument cluster display settings. The following functions are available: Time and date synchronization with head unit * This function is only available in vehicles with COMAND* and navigation modul[...]

142 Controls in detail Control system 왘 Move the selection marker with button æ or ç to the Time/Date submenu. 왘 Press button j or k repeatedly until the message Time-Hours Press R To Confirm or Time-Minute(s) Press R To Confirm appears in the multifunc- tion display. Example illustration for setti ng the hour 왘 Press button æ or ç to set[...]

143 Controls in detail Control system Lighting sub menu Access the Lighting submenu via the Se ttings menu. Use the Lighting sub- menu to change the lamp and lighting settings on your vehicle. The following functions are available: Setting daytime running lam p mode (USA only) 왘 Move the selection marker with button æ or ç to the Lighting subme[...]

144 Controls in detail Control system Setting locator lighting With the locator lighting feature activated and the exterior lamp switch in position U , the following lamps will switch on during darkness when the vehi- cle is unlocked with the SmartKey: 앫 Parking lamps 앫 Tail lamps 앫 License plate lamps 앫 Side mark er lamp s 앫 Front fog la[...]

145 Controls in detail Control system If after turning off the engine you do not open a door or do not close an opened door, the lamps will automatically switch off after 60 seconds. 왘 Move the selection marker with button æ or ç to the Lighting submenu. 왘 Press button j or k repeatedly until the message Headlamps Delayed Shut-off appears in [...]

146 Controls in detail Control system Vehicle submenu Access the Vehicle submenu via the Settings menu. Use the Vehicle submenu to make general vehicle settings. The following functions are available: For additional information on central locking, see “Automatic central locking” ( 컄 page 102). Selecting audi o search func tion Use of the Audi[...]

147 Controls in detail Control system Convenience* submenu Access the Convenience submenu via the Settings menu. Use the Convenience sub- menu to change the settings for a number of convenience features. The following function is available: Activating easy-entry/exit feature* Use this function to activate and deactivate the easy-entry/exit feature [...]

148 Controls in detail Control system Trip computer menu Use the trip computer menu to call up statistical data on your vehicle. The following information is available: Fuel consumption statistics since start 왘 Press button è or ÿ repeatedly until the message From Start appears in the multifunction display. 1 Statistics called up: since start 2[...]

149 Controls in detail Control system Resetting fuel consumption statistics 왘 Press and hold reset button J until the values of the statistics are reset to 0 . Calling up range (distance to empty) 왘 Press button è or ÿ repeatedly until the message From Start appears in the multifunction display. 왘 Press button j or k repeatedly until the me[...]

150 Controls in detail Control system You can use the functions in the TEL menu to operate your telephone, provided it is connected to a hands-free system and switched on. 왘 Switch on the telephone and Audio or COMAND*. See separate operating instructions. 왘 Press button è or ÿ repeatedly until the TEL menu appears in the multifunction displa[...]

151 Controls in detail Control system Ending a call or re jecting an incoming call 왘 Press button t . Dialing a number from the phone book If your telephone is ready to receive calls, you may select and dial a number from the phone book at any time. 왘 Press button è or ÿ repeatedly until the TEL menu and the standby message appear in the mult[...]

152 Controls in detail Control system Redialing The control system stores the most recent- ly dialed phone numbers. This eliminates the need to search through your entire phone book. 왘 Press button è or ÿ repeatedly until the TEL menu and the standby message appear in the multifunction display. 왘 Press button s . In the multifunction display [...]

153 Controls in detail Manual transmission 왔 Manual transmission Manual transmission is standard equip- ment on select models and not available on all models. For information on driving with a manual transmission, see “Driving off” ( 컄 page 53). War n i n g ! G For vehicles equipped with a manual trans- mission, getting out of your vehicle [...]

154 Controls in detail Manual transmission Gearshift pattern f or manual transmiss ion Shifting into re verse 왘 Stop the vehicle completely . 왘 Fully depress the clutch pedal. 왘 Move the gearshift lever to the neutral position (no gear selected). 왘 Move the gearshift lever to the left until you feel a certain resistance. 왘 Push the gearsh[...]

155 Controls in detail Automatic transmission* 왔 Automatic transmission* For more information on driving with an automatic transmission, see “Driving off” ( 컄 page 53). Your vehicle’s transmission adapts its gear shifting process to your individual driving style by continually adjusting the shift points up or down. These shift point adjus[...]

156 Controls in detail Automatic transmission* There are additional indicators on the cover of the shifting gate showing the current gear selector lever position. The indicators come on when you insert the SmartKey into the starter switch, and go out when you remove the SmartKey from the starter switch. Shifting procedure The automatic transmission[...]

157 Controls in detail Automatic transmission* Gear selector lever positions The current gear selector lever position appears in the multifunction display. 1 Current gear selector lever position Effect ì Park position Gear selector lever position when the vehicle is parked. Place gear selector lever in park position P only when vehicle is stopped.[...]

158 Controls in detail Automatic transmission* Effect ë Neutral No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). To avoid damage to the trans- mission, never engage neutral position N while driving. If the ESP ® is deacti vated or malfunctioning: Move gear [...]

159 Controls in detail Automatic transmission* Driving tips Accelerator position Your driving style influences the transmission’s shifting behavior: Less throttle Earlier upshifting More throttle Later upshifting Kickdown Use kickdown when you want maximum acceleration. 왘 Press the accelerator past the point of resistance. Depending on the engi[...]

160 Controls in detail Automatic transmission* Gear ranges With the gear selector lever in drive position D and driving in program mode C or S , you can select a gear range for the automatic transmission to operate within. Gear selector lever ( 컄 page 162): You can limit the gear range by pressing the gear selector lever to the left ( D- ), and r[...]

161 Controls in detail Automatic transmission* Automatic shift program The program mode selector switch is located on the lower part of the center console. Program mode selector switch C Comfort For comfort driving S Sport For standard driving Program mode selector switch on vehicles with AMG-Spo rt Package* and SLK 55 AM G only M Manual For manual[...]

162 Controls in detail Automatic transmission* 왘 Press program mode selector switch repeatedly until the letter of the desired program mode appears in the multifunction display. Select C for comfort driving: 앫 The vehicle starts out in second gear (both forward and reverse) for gentler starts. This does not apply if full throttle is applied or [...]

163 Controls in detail Automatic transmission* Extending gear range 왘 Briefly press the gear selector lever to the right in the D+ direction. The transmission will shift to the next higher gear as permitted by the shift program. This ac tion simultaneously extends the gear rang e of the transmis- sion. Canceling gear range lim it 왘 Press and ho[...]

164 Controls in detail Automatic transmission* Gearshift paddles (example il lustration vehicles with AMG-Sp ort Package*) 1 Left shift paddle: lim iting gear range or downshift (in program mode M ) 2 Right shift paddle: extending gear range or upshift (in program mode M ) The following instructions describe opera- tion of the steering wheel gearsh[...]

165 Controls in detail Automatic transmission* Canceling gear range limit 왘 Pull and hold right shift paddle 2 until D reappears in the multi function display ( 컄 page 157). The transmission will shift from the current gear range directly to gear range D . Shifting into optimal gear range 왘 Pull and hold left shift paddle 1 . The transmission[...]

166 Controls in detail Automatic transmission* Activating manual shift program 왘 Press program mode selector switch repeatedly until the M for manual program mode M appears in the multi- function display. The transmission switches to the manual program mode M . Automatic shifting is switched off. The gear range is not limited. You can change the [...]

167 Controls in detail Automatic transmission* Downshif ting 왘 Briefly press the gear selector lever to the left in the D- direction. or 왘 Briefly pull left shift paddle 1 ( 컄 page 164). The transmission shifts to the next lower gear. Kickdown Using the kickdown when driving in the manual program mode M is not possible. Deactivating manu al s[...]

168 Controls in detail Good visibility For information on the windshield wipers, see “Windshield wipers” ( 컄 page 56). Headlamp cleaning system* The headlamps will automatically be cleaned with a high-pressure water jet when you have 앫 switched on the headlamps and 앫 operated the windshield wipers with windshield washer fluid five times W[...]

169 Controls in detail Good visibility Sun visors The sun visors protect you from sun glare while driving. 1 Mirror lamp* 2 Mounting 3 Mirror cover 4 Sun viso r Wa r n i n g ! G The auto-dimming functi on does not react if incoming light is not aimed directly at sen- sors in the interior rear view mirror. The interior rear view mirror and the exter[...]

170 Controls in detail Good visibility 왘 Swing sun visors down when you experience glare. 왘 To use mirror and switch on mirror lamp*, lift up mirror cover 3 . Rear window defroster The rear window defroster uses a large amount of power. To keep the battery drain to a minimum, switch off the defrost- er as soon as the rear window is clear. The d[...]

171 Controls in detail Good visibility Switching o ff 왘 Press the rear window defroster switch F again in the control panel of the climate control or the automatic climate control*. The indicator lamp on the rear window defroster switch F goes out. ! If the rear window defroster switches off too soon and the indicator lamp starts flashing, this m[...]

172 Controls in detail Climate control[...]

173 Controls in detail Climate control Item 1 Right center air vent, adjustable 2 Thumbwheel for air v olume control for fixed/adjustable right center air vents 3 Right center air v ent, fixed 4 Right side defroster air vent, fixed 5 Right side air vent, adjustable 6 Thumbwheel for air v olume control for adjustable right side air vent 7 Climate co[...]

174 Controls in detail Climate control Climate control panel The climate control is operational when- ever the engine is running. The system cools or heats the interior depending on the selected interior temperature and the current outside temperature. Nearly all dust part icles, po llutants and odors are filtered ou t before outside air enters the[...]

175 Controls in detail Climate control Switching climate control system on/off Switchin g off 왘 Set air volume control 2 ( 컄 page 174) to position 0 . Switchin g on 왘 Switch on the ignition ( 컄 page 37). 왘 Set air volume control 2 to any speed ( 컄 page 174). The previous settings are once again in effect. Setting the temper ature Use te[...]

176 Controls in detail Climate control Decreasing 왘 Turn temperature control 1 and/or 4 ( 컄 page 174) slightly counterclockwise. The climate control system will corre- spondingly adjust the interior air tem- perature. Adjusting air distribution Use air distribution control 3 ( 컄 page 174) to adjust the air distribution. The following symbols [...]

177 Controls in detail Climate control Adjusting air volume Ten blower speeds are available. 왘 Use air volume control 2 ( 컄 page 174) to adjust the air volume. Basic settings Heating (winter) 왘 Turn temperature controls 1 and 4 ( 컄 page 174) t o the desired position. 왘 Turn air volume control 2 ( 컄 page 174) to level 2 or higher. Otherw[...]

178 Controls in detail Climate control Deactivating 왘 Press button P ( 컄 page 174) again. The indicator lamp on the button goes out. The previous settings are once again in effect. Windshield fogged on the outside 왘 Switch the windshield wipers on ( 컄 page 56). 왘 Turn air distribution control 3 to position a or Y ( 컄 page 174). Air reci[...]

179 Controls in detail Climate control Air recirculatio n mode with convenience closing or opening feature Convenience closing 왘 Press and hold b utton , until the windows are closed or have reached the desired position. The indicator lamp on the button comes on. The air recirculation mode is activated. Convenience opening 왘 Press and hold butt[...]

180 Controls in detail Climate control Air conditioning The cooling function, only operational when the engine is running, cools the vehicle interior down to the selected temperature. The cooling function also dehumidifies the air in the vehi cle interior, thus preventing the windows from fogging up. Deactivating It is possible to deactivate the ai[...]

181 Controls in detail Climate control 왘 Set air volume control 2 ( 컄 page 177) to position 5 . The ventilation operates with maximum blower speed. 왘 Turn temperature controls 1 and 4 ( 컄 page 174) co mpletely countercl ock- wise to their end stops. The lowest temperature for both sides is set. Residual engine heat utilization With the engi[...]

182 Controls in detail Automatic climate control*[...]

183 Controls in detail Automatic climate control* Item 1 Cockpit air vent (depending on vehicle production date) 2 Thumbwheel for air v olume control for cockpit air vent (depending on vehicle production date) 3 Right center air vent, adjustable 4 Thumbwheel for air v olume control for fixed/adjustable right center air vents 5 Right center air v en[...]

184 Controls in detail Automatic climate control* The automatic climate control is oper- ational whenever the engine is running. You can operate the automatic climate control system in either the automatic or manual mode. The system cools or heats the interior depending on the selected interior temperature and the current outside temperature. Item [...]

185 Controls in detail Automatic climate control* Nearly all dust partic les, poll utants an d odors are filtered ou t before outside air enters the interior through the air dis- tribution system. The air conditioning will not engage (no cooling) if the A/C mode is deactivated ( 컄 page 184). Deactivating the climate control system Deactivating ?[...]

186 Controls in detail Automatic climate control* Reactivating 왘 Switch on the ignition ( 컄 page 37). 왘 Press button ´ ( 컄 page 184) again . The previous settings are once again in effect. or 왘 Press button U ( 컄 page 184). The indicator lamp on the button comes on. Air volume and air dis- tribution are adjusted automatically. Operatin[...]

187 Controls in detail Automatic climate control* Increasing 왘 Press temperature button(s) 4 and/or 6 ( 컄 page 184) until th e desired temperature appears in the control panel display e ( 컄 page 184). The automatic climate control system will correspondingly adjust the interior air temperature. Decreasing 왘 Press temperature button(s) b and[...]

188 Controls in detail Automatic climate control* Opening the cockpit air vent and cente r air vents Center air vents 왘 Turn thumbwheels 4 and b ( 컄 page 182) to the first stop. Center air vents 3 , 5 , a and c are open. 왘 Turn thumbwheels 4 and b ( 컄 page 182) upward all the way. Only center air vents 3 and c are open. Cockpit air vent (de[...]

189 Controls in detail Automatic climate control* Front defroster You can use this setting to defrost the windshield, for example if it is iced up. You can also defog the windshield and the side windows. Activating 왘 Press button P ( 컄 page 1 84). The indicator lamp on the button comes on. The air conditioning switches automatically to the foll[...]

190 Controls in detail Automatic climate control* Air recirculation mode Switch to air recirculation mode to prevent unpleasant odors from entering the vehicle from the outside (e.g. before driving through a tunnel). This setting cuts off the intake of outside air and recirculates the air in the interior. Activating 왘 Press button , ( 컄 page 18[...]

191 Controls in detail Automatic climate control* Convenience closing 왘 Press and hold button , until the windows are closed or have reached the desired position. The indicator lamp on the button comes on. The air recirculati on mode is activated. Convenience opening 왘 Press and hold b utton , until the windows are opened or have reached the de[...]

192 Controls in detail Automatic climate control* Deactivating It is possible to deactivate the air condi- tioning (cooling) function of the automatic climate control system. The air in the vehicle will then no longer be cooled or dehumidified. 왘 Press button œ ( 컄 page 184). The indicator lamp on the button goes out. Activating Moist air can [...]

193 Controls in detail Audio system 왔 Audio system Audio and telephone*, op eration These instructions are intended to help you become familiar with your Mercedes-Benz audio system. They con- tain useful tips and a detailed description of the user functions. Operating safety War n i n g ! G In order to avoid distraction which could lead to an acc[...]

194 Controls in detail Audio system Operating and display elem ents[...]

195 Controls in detail Audio system Item Page 1 CD changer mode selector 208 2 Single CD mode selector 212 3 Radio mode selector 4 Mute function (radio) 202 Pause (CD) 218 5 Volume distribution 198 6 Sound settings 197 7 Display 8 Alphanumeric keypad Item Page 9 Speed dialing memory (tele- phone*) in descending order a Accepting a call (telephone*)[...]

196 Controls in detail Audio system Button and soft key operation In these instructions, the alphanumeric keypad (right side of radio panel) and the function buttons (left side of radio panel) are referred to as “buttons”. The four keys below the display panel are referred to as “soft keys”. Operation Switching the u nit on/off Switching on[...]

197 Controls in detail Audio system Adjusting sound functions The bass and treble functions are called up by pressing the O button. Settings for bass and treble are stored separately for th e AM and FM waveba nds, weather band, CD mode and telephone mode. Bass 왘 Press O button repeatedly until BASS appears in the display. 왘 Press + or – soft [...]

198 Controls in detail Audio system Returning sound functions to factory settings 왘 Press O button to call up settings menu in the display. 왘 Press RES soft key briefly; the respec- tive sound function is reset to its center level. or 왘 Press and hold RES soft key until RESET appears in the display. The sound settings for bass and treble are [...]

199 Controls in detail Audio system Telephone* muting If your vehicle equipment includes a Mercedes-Benz specified mobile telephone*, you can adjust its volume separately from the volume of the audio system while the telephone* is being used. Radio operation Selecting radio mode 왘 Press b button. Calling u p wavebands You can choose from among th[...]

200 Controls in detail Audio system Calling up wavebands for radios with SAT 왘 Press FM , AM or WB soft key repeatedly until desired waveband has been selected. The FM, AM and WB wavebands are called up one after another. The waveband curr ently selected appears in the upper left-hand corner of the display. Selecting a station The following optio[...]

201 Controls in detail Audio system Manual tu ning 왘 Select desired waveband. 왘 Press G or H button for approximately 3 seconds. 왘 Press button repeatedly until the desired frequency has been reached. Step-by-step station tuning takes place in ascending or descending order. Each time the button is pressed, the radio tunes further by 0.2 MHz. [...]

202 Controls in detail Audio system Autostore – automatic station memory The Autostore memory function provides an additional memory level. The station memory for manually stored stations is not overwritten. 앫 Calling up Autostore memory level and storing stations 왘 Press AS soft key briefly. The radio switches to the Autostore memory level. [...]

203 Controls in detail Audio system Search 왘 Press G or H button to tune in the next receivable weather band station. Scan search 앫 Starting scan search 왘 Press SC soft key. SC will appear in the display. The radio briefly (approximately 8 seconds) tunes in all receivable weather band stations. 앫 Ending scan search 왘 Press SC soft key or [...]

204 Controls in detail Audio system Program categories The channels are categorized. Categories allow you to tune to stations broadcasting a certain type of program (category mode) ( 컄 page 206). Calling up the SAT main menu 왘 Press SAT soft key. SAT is displayed in the upper left-hand corner of the display. Prior to activation of the satellite[...]

205 Controls in detail Audio system 왘 Press ESN soft key. The twelve-digit electronic serial number (ESN) of the SAT tuner* installed in your vehicle is displayed. This information is required to call the SIRIUS Service Center for an activation request. After activation of the satellite radio service The satellite radio main menu appears. The rad[...]

206 Controls in detail Audio system Accessing via number keys 왘 Enter number of preset you wish to select, e.g. 1 . The radio plays the station stored under this number and the PTY function changes to the category corresponding to the station. Tuning via manual ch annel input Example : tunin g in ch annel 16 왘 Press * . Input line appears in th[...]

207 Controls in detail Audio system The system will automatically switch to a station of the selected category i f the currently selected station is not of the selected category. Otherwise, the currently selected station remains tuned. 앫 Tuning a station within the selected category The channels identified for the currently selected category are [...]

208 Controls in detail Audio system Storing stations 왘 Tune in desired station. 왘 Press and hold desired station button 1 to R until a brief signal tone is heard. The frequency is stored on the selected station button. The radio saves the current station at the memory preset selected. The memory preset selected appears in the status line, e.g. [...]

209 Controls in detail Audio system General notes The system may not be able to play audio CDs with copy protection. Playing copied CDs may cause malfunctions during playback. Should excessively high or low tempera- tures occur while in CD changer mode*, CD TEMP will appea r in the disp lay, and the CD will be muted until the temperature has reache[...]

210 Controls in detail Audio system Tips on handling CDs 앫 Handle CDs carefully to prevent interference during playback. 앫 Avoid scratches, fingerp rints and dust on the CDs. 앫 Do not write on CDs or apply any labels or other mate rial to them. 앫 Clean CDs from time to ti me with a commercially availabl e cleaning cloth. Never wipe the CD i[...]

211 Controls in detail Audio system Compatible bit and sampling rates Fixed and variable bit rates of up to 320 kBit/s are possible. The following table lists possible sampling rates: Information on copyright The music tracks that you create for use in MP3 mode or that you play in MP3 mo de are subject to copyright laws under appli- cable internati[...]

212 Controls in detail Audio system Operating th e single CD pl ayer in the audio syst em unit Loading a CD The single CD player in the audio system unit has capacity for one CD. The CD slot for loading the drive is located underneath the soft keys. 왘 Make sure the system is switched on. 왘 Insert CD into CD slot. The label side of the CD must f[...]

213 Controls in detail Audio system A light-emitting diode in the buttons shows the status of the corresponding magazine slot. CD loading slot 1 is above buttons 2 and is used to load CDs. Loading the CD magazine Loading single CDs 왘 Open the glove box ( 컄 page 253). 1 CD loading slot 2 Magazine slot button 왘 Briefly press button 2 for the em[...]

214 Controls in detail Audio system Loading several CD s 왘 Open the glove box. 왘 Press button 2 of an empty magazine slot for more than 2 seconds. The light-emitting diodes in all the mag- azine slot buttons light up several times in green, and ALL LOAD appears in the display. 왘 Wait until the light-emitting diode for the first magazine slot [...]

215 Controls in detail Audio system 왘 Close the glove box. Ejecting all loaded CDs 왘 Open the glove box. 왘 Press the button of a loaded magazine slot for more than 2 seconds. The light-emitting diodes in all maga- zine slot buttons light up several times in red, and ALL EJECT appears in the display. The CD changer ejects the CDs one after ano[...]

216 Controls in detail Audio system Playing CDs Single CD player in the audio unit 왘 Press i button. CD0 will appear in the upper left-hand corner of the display. The CD will resume playback at the point where it was switched off. CD changer* 왘 Press Q button. CD and the selected magazine slot number appear in the upper left-hand corner of the [...]

217 Controls in detail Audio system Direct track entry You can make a direct selection from among the tracks on a CD. 왘 Press * button. 왘 Enter track number using buttons 1 to R . The number of the track being played appears next to TRACK in the display. You can only enter available track numbers. Skipping tr acks forward/ba ckward 앫 Skipping[...]

218 Controls in detail Audio system Random play The random function (RDM) plays the tracks of the current CD in random order. 앫 Switching on random 왘 Press RDM soft key. RDM appears in the display. A randomly selected track is played. 앫 Switching off random 왘 Press RDM soft key again. Repeat The track being played is repeated until the repe[...]

219 Controls in detail Audio system Track and time display 왘 Press T soft key. The number of the track being played and the elapsed playing time appear in the display. 왘 Press T soft key again. The total number of tracks and the total playing time of the CD appear in the display. 왘 Press T soft key. The standard CD playback menu appears in th[...]

220 Controls in detail Audio system Further operating instructions not covered here can be found in the operating instruc- tions for the multifunction steering wheel and the mobile telephone*. If your audio system is set up for telephone operation, the t symbol will appear in the display. When you insert your Mercedes-Benz specified mobile telephon[...]

221 Controls in detail Audio system Adjusting the volume 왘 Turn rotary control of E button during a telephone call. The volume will increase or decrease depending on the direction turned. Adjusting sound 왘 Adjust sound during a telephone call. Sound adjustment see “Adjusting sound functions” ( 컄 page 197). Placing a call Entering a teleph[...]

222 Controls in detail Audio system 앫 Searching and calling up telephone book entries by name You can access your mobile telephone’s phone book using the audio system. You can access both the main entries and the sub-entries of your phone book. 왘 Press MEM soft key or press button ‚ or ƒ . 왘 Press desired numerical key 2 to 9 . The store[...]

223 Controls in detail Audio system 앫 Returning calls received 왘 Press MEM soft key or press button ‚ or ƒ . 왘 Press RCV soft key (received calls). The number of received calls and then the call last received appear briefly in the display. 왘 Select desired telephone number with button ‚ or ƒ . The letter R and the number of the memory[...]

224 Controls in detail Audio system Redial If the number you have dialed is busy, you can again place calls to the last ten telephone numbers dialed using the redial function. 앫 Manual redial 왘 Press s button. The telephone number last dialed will appear in the display. 왘 Select desired telephone number with butt on ‚ or ƒ . The letter L a[...]

225 Controls in detail Audio system Muting a call It is possible to mute a call; the caller is then no longer able to hear you. 앫 Mute on 왘 Press MUT soft key. 왘 MIC MUTE will appear in the display. 앫 Mute off 왘 Press MUT soft key again. Terminating a call 왘 Press t button. The current call is terminated and the muted audio source becom[...]

226 Controls in detail Audio system 앫 Combining two calls 왘 Press 3 and s buttons. The calls are combined into one call. 앫 Terminating a combined call 왘 Press t button. The connection to both callers is terminated. TDMA or CDMA network phones Using your Mercedes-Benz specified mobile telephone*, a number of functions and operating steps can[...]

227 Controls in detail Audio system Switching o n the telephon e Switching on the telephone 왘 Press h button. If you have programmed an unlock code for the telephone, you must now enter the code. 왘 Enter code using buttons 1 to R . 왘 If necessary, correct number entered with the CLR soft key. Press soft key briefly to delete the last digit en[...]

228 Controls in detail Audio system 왘 If necessary, correc t number entered with th e CLR soft key. Press soft key briefly to delete the last digit entered; press soft key and hold to delete the complete number. 왘 After correct telephone number has been entered, press s button. Phone book The numbers stored in the phone book o f the mobile tele[...]

229 Controls in detail Audio system 왘 Press and hold button ‚ or ƒ until desired initial letter has been reached. or 왘 Press button ‚ or ƒ repeatedly until desired entry has been reached. The stored entries are selected in alphabetical order with the sub-entries. 왘 When you have selected a number, press s button. The call will be made. [...]

230 Controls in detail Audio system 앫 Speed dial If you have stored telephone numbers as speed dial numbers in your telephone, you can also enter these with butt ons 1 to R on the radio unit. 왘 Press desired button 1 to R briefly. 왘 Press s button. The call will be made. 앫 Turbo dial If you have stored telephone numbers as turbo dial number[...]

231 Controls in detail Audio system Accepting an incoming call If the telephone is active in the background (reception symbol is visible in the display), the audio source is muted when an incom- ing call is received. A ringing tone can be heard and the caller’s telephone number, or the name under which the telephone number has been saved i n the [...]

232 Controls in detail Audio system 앫 Switching between calls 왘 Press s button. This switches between the calls. The non-active call is kept on hold. 앫 Terminating a call 왘 Press t button. The current call is terminated. The connection to the caller previously kept on hold is also interrupte d; however, reconnection is indicated by an acous[...]

233 Controls in detail Audio system Emergency calls “911” The following describes how to dial a “911” emergency call using the audio system head unit when a Merc edes-Benz specified mobile phone* is inserted in the phone cradle. Unless otherwise specified, the descriptions refer to the audio system head unit. Consult the separate telephone [...]

234 Controls in detail Audio system Placing a “911” emer gency call using audio head unit with th e phone unlocked 왘 Press h button to switch to telephone operation. 왘 Enter 911 using the number keypad on the audio head unit. 왘 Press s button for dialing to begin. DIALING appears in the audio display while the telephone establishes the co[...]

235 Controls in detail Power windows 왔 Power windows Opening and closing the wind ows The windows are opened and closed elec- trically. The switches for both door win- dows are located on the driver’s door. The switch for operating the passenger-side door window is located on the passenger door. The door windows can also be operated using the r[...]

236 Controls in detail Power windows 왘 Switch on the ignition ( 컄 page 37). Opening the door windows 왘 Press and hold switch 1 or 2 at the symbol k to the resistance point. The corresponding window will move downwards until you release the switch. Closing the door windows 왘 Press and hold switch 1 or 2 at the symbol j to the resistance poin[...]

237 Controls in detail Power windows Stopping windows during Express-operation 왘 Briefly press the respective switch at the symbol k or j again. Opening and closing the windows with the retractable h ardtop switch All windows can be opened or closed with the retractable hardtop switc h. The retractable hardto p switch is located on the lower part[...]

238 Controls in detail Power windows Opening 왘 Push the retract able hardtop switch in quick succession twice in direction of arrow 1 . All side windows open. Closing 왘 Push the retract able hardtop switch in quick succession twice in direction of arrow 2 . 왘 Keep the retractable hardtop switch pushed the second time until all win- dows are c[...]

239 Controls in detail Power windows Synchronizing power windows The power windows must be synchronized 앫 after the battery has been disconnect- ed or discharged. 앫 if the power windows cannot be fully opened (Express-open) or closed (Express-close). Each power window must be synchronized. 왘 Close all doors. 왘 Switch on the ignition ( 컄 p[...]

240 Controls in detail Retractable hardtop Opening and closing the retractable hardtop For safety reasons, the retractable hardtop can only be opened and closed when the vehicle is standing still. Wa r n i n g ! G Before operating the switch for the retract- able hardtop, make su re no persons are in- jured by the moving parts (retractable hardtop,[...]

241 Controls in detail Retractable hardtop Luggage co ver The luggage cover is located in the trunk. Luggage cover Closing 왘 Pull the luggage cover at the handle in direction of the arrow until i t engages on both sides at the trunk sill. Opening 왘 Press the release handle on the lug- gage cover. 왘 Guide the luggage cover forward to its end s[...]

242 Controls in detail Retractable hardtop The switch for opening/closing the retract- able hardtop is on the lower part of the center console. Retractable hardtop swi tch 1 Opening 2 Closi ng For operating the power windows with the retractable hardtop switch ( 컄 page 237). Opening 왘 Push and hold the retractable hard top switch in direction o[...]

243 Controls in detail Retractable hardtop If the retra ctable hard top is not properly locked, lock it as described below. Unlocked status noticed when stopped 왘 Switch on the ignition ( 컄 page 37). 왘 To lock the retractable hardtop in its fully closed position, push the retract- able hardtop switch forward until the retractable hardtop is f[...]

244 Controls in detail Retractable hardtop Unlocked status noticed while driving 왘 Stop the vehicle and leave the ignition switched on. 왘 To lock the retractable hard top in its fully closed position, push the retract- able hardtop switch forward until the retractable hardtop is fully closed . or: 왘 To lock the retractable hard top in its ful[...]

245 Controls in detail Retractable hardtop Opening (Sum mer opening fe ature) 왘 Press and hold unlock button Œ un- til the retractable hardtop is complete- ly open. The retractable hardtop and windows begin to open after approximately 1 second. In the multifunction display you will see the message Retractable Roof In Operation . 왘 Release butt[...]

246 Controls in detail Retractable hardtop Problems when operating the retractable hardtop Several conditions may cause the retract- able hardtop to not open, close, or lock properly: 앫 The luggage cover in the trunk is not closed. 왘 Close the luggage cover in the trunk. 앫 The trunk lid is open. 왘 Close the trunk lid. 앫 The battery voltag[...]

247 Controls in detail Retractable hardtop 6 Handle cap Installing 왘 Remove wind screen 1 from its stor- age bag and unfold. The storage bag is located on the wall behind the seat backrests. 왘 Attach supporting straps 3 to fasten- ing pins 4 . 왘 Close snap fasteners 2 by pus hing in handle cap 6 . 왘 Pull wind screen 1 on molding over roll b[...]

248 Controls in detail Driving systems The driving system of your vehicle is described on the following pages: 앫 Cruise control, with which the vehicle can maintain a preset speed. The BAS, ABS and ESP ® driving systems are described in the “Safety and Security” section ( 컄 page 84). Cruise control The cruise control automatically maintain[...]

249 Controls in detail Driving systems 1 Set current or higher speed 2 Set current or lower speed 3 Cancel cruise control 4 Resume to last set speed Setting current speed 왘 Accelerate or decelerate to the desired speed. 왘 Briefly lift 1 or depress 2 the cruise control lever ( 컄 page 249). The current speed is set. 왘 Remove your foot from th[...]

250 Controls in detail Driving systems Canceling cruise control There are several ways to cancel the cruise control: 왘 Step on the brake pedal. The cruise control is canceled. The last speed set is stored for later use. or 왘 Briefly push the cruise control lever in direction of arrow 3 ( 컄 page 249). The cruise control is canceled. The last s[...]

251 Controls in detail Driving systems Setting a higher speed 왘 Lift the cruise control lever in direction of arrow 1 ( 컄 page 249) and h old it up until the desired speed is reached. 왘 Release the cruise control lever. The new speed is set. Setting a lower speed 왘 Depress the cruise control lever in direction of arrow 2 ( 컄 page 249) and[...]

252 Controls in detail Loading Roof rack ! This vehicle is not designed to carry items on its roof. Roof rails and any roof-mounted devices, unless ex pressly approved by Mercedes-Benz for use on this vehicle mo del, must not be used a s they will damage the veh icle and retractable hardtop. At time of printing, Mercedes-Benz does not offer any roo[...]

253 Controls in detail Useful fe atures 왔 Useful features Storage compartm ents Glove box 1 Glove box lid release 2 Glove box lid 왘 Pull glove box lid release 1 to open the glove box. The glove box lid opens downward. 왘 Push glove box lid 2 up until it engages to close the glove box. Storage/telephone* compartment 1 Armrest 2 Recess for openi[...]

254 Controls in detail Useful f eatures Storage compartment between the seat backrests 1 Storage compartment lid release 2 Storage compartment 왘 Press storage compartment lid release 1 to open. The storage compartment lid opens downward. 왘 Push storage compartment lid up until it engages to close it. Parcel net in passenger footwell A small con[...]

255 Controls in detail Useful fe atures Cup holder 1 Cover plate 왘 Press briefly on cover plate 1 to open the cup holder. The cup holder opens automatically. 왘 Press cover plate 1 until the cup holder engages to close it. Ashtray 1 Cover plate 왘 Press cover plate 1 briefly in direction of the arrow. The ashtray opens automatically. 왘 To clo[...]

256 Controls in detail Useful f eatures Removing ashtray insert 왘 Secure vehicle from movement by setting the parking brake. 왘 Move the selector lever to position N (manual transmission: second gear). Now you have more room to take out the ashtray insert. 왘 Open the ashtray. 왘 Reach into both recesses on the left and right side of the retai[...]

257 Controls in detail Useful fe atures 1 Cigarette lighter 왘 Push in ci garette lighte r 1 . Cigarette lighter 1 will pop out auto- matically when hot. 왘 Reinsert cigarette lighter 1 in its socket after use. Power outlet A power outlet is located in the passenger footwell on the side panel of the center console. 1 Power outlet 왘 Switch on th[...]

258 Controls in detail Useful f eatures Floormat (driver’s side only) Removing 1 Removing 2 Retainer pin 왘 Pull floormat off of retainer pin 2 in direction of arrow 1 . 왘 Remove the floormat. Installing 3 Installing 4 Eyelet 5 Retainer pin 왘 Lay down the floormat. 왘 Press the floormat eyelet 4 onto retainer pin 5 in direction of arrow 3 .[...]

259 Controls in detail Useful fe atures Telephon e* Radio transmitters, such as a port able tele- phone or a citizens band unit, shoul d only be used inside the vehicle if they are con- nected to an antenna that is installed on the outside of the vehicle. The external antenna must be approved by Mercedes-Benz. Please contact an autho- rized Mercede[...]

260 Controls in detail Useful f eatures Please note that these functions are only available with Mercedes-Benz approved mobile phones. Please contact an autho- rized Mercedes-Benz Center for informa- tion on features available for your mobile phone of choice. The cradle is located in the front center armrest storage/telephone* compartment ( 컄 pag[...]

261 Controls in detail Useful fe atures The mobile phone is linked to the hands-free device and the multifunc- tion steering wheel. The battery is charged depending on its charge status and the position of the SmartKey in th e starter swi tch. The charge procedure will be indicated in the mobile phone’s display. You can place or receive phone cal[...]

262 Controls in detail Useful f eatures Installing a different mobile phone cradle Example illustration 1 Contact plate 2 Recesses 3 Mobile phone cradle 왘 Insert mobile phone cradle 3 into recesses 2 of contact plate 1 . 왘 Push mobile phone cradle 3 for ward until it engages. Tele Aid* Shortly after the completion of your Tele Aid acquaintance [...]

263 Controls in detail Useful fe atures 왘 To activate, press the SOS button, the Roadside Assistance button • or the Information button ¡ , depend- ing on the type of response required. System self-check Initially, after switching on ignition, mal- functions are detected and indicated (the indicator lamps in the SOS button, the Roadside Assist[...]

264 Controls in detail Useful f eatures Emergency calls An emergency call is initiated automatical- ly following an accide nt in which the emer- gency tensioning devices (ETDs) or air bags deploy. An emergency call can also be initiated manually by opening the cover next to the interior rear view mirror labeled SOS, then briefly pressing the button[...]

265 Controls in detail Useful fe atures Initiating an emerge ncy call ma nually 1 Cover 2 SOS button 왘 Briefly press on cove r 1 . The cover opens. 왘 Press SOS button 2 briefly. The indicator lamp in SOS button 2 flashes until the emergency call is con- cluded. 왘 Wait for a voice connection to the Response Center. 왘 Close cover 1 after the [...]

266 Controls in detail Useful f eatures Roadside Assistance button • The Roadside Assistance button • is located in the center armrest storage/telephone* compartment ( 컄 page 253). 1 Roadside Assistance button 왘 Open the storage/telephone* com- partment ( 컄 page 253). 왘 Press and hold button 1 (for longer than 2 seconds). A call to a Me[...]

267 Controls in detail Useful fe atures Information button ¡ The Information button ¡ is locate d in the center armrest storage/telephone* compartment ( 컄 page 253). 1 Information button 왘 Open the storage/telephone* com- partment ( 컄 page 253). 왘 Press and hold button 1 (for longer than 2 seconds). A call to the Customer Assistance Cente[...]

268 Controls in detail Useful f eatures For more details concerning the Tele Aid system, please visit www.mbusa.com and use your ID and password (sent to you separately) to learn more (USA only). Call pri ority If other service calls such as a Roadside Assistance call or Information call are ac- tive, an Emergency call is still possibl e. In this c[...]

269 Controls in detail Useful fe atures Remote door unlock In case you have locked your vehicle uni n- tentionally (e.g. SmartKey inside vehicle), and the reserve SmartKey is not handy: 왘 Contact the Mercedes-Benz Response Center at 1-800-756-9018 (in th e USA) or 1-888-923-8367 (in Canada). You will be asked to provide your pass- word which you [...]

270 Controls in detail Useful f eatures Garage door opener* The integrated remote control is capable of operating up to three separately controlled devices. It provides a convenient way to re- place up to three hand-held remote con- trols used to operate devices such as garage door openers, gate openers, or oth- er devices compatible with HomeLink [...]

271 Controls in detail Useful fe atures Programming the integrated remote control Step 1: 왘 Switch on the ignition ( 컄 page 37). Step 2: 왘 If you have previously pr ogrammed a signal transmitter button and wish to retain its programming, proceed to step 3. If you are programmi ng the integrated remote control for the first time , press and ho[...]

272 Controls in detail Useful f eatures Step 5: 왘 After indicator lamp 1 changes from a slow to a rapidly flashing light, release the hand-held remote control button and the signal transmitter button. Step 6: 왘 Press and hold the just-trained signal transmitter button ( 2 , 3 or 4 ) and observe indicator lamp 1 . If indicator lamp 1 stays on co[...]

273 Controls in detail Useful fe atures Step 11: 왘 Press, hold for 2 seconds and release same signal transmitter button a second time to complete the training process. Step 12: 왘 Confirm the garage door operation by pressing the programmed signal trans- mitter button ( 2 , 3 or 4 ). Step 13: 왘 To program the remaining two signal transmitter b[...]

274 Controls in detail Useful f eatures Reprogramming a single signal trans- mitter button To program a devi ce using a signal trans- mitter button previously trai ned, follow these steps: 왘 Switch on the ignition ( 컄 page 37). 왘 Press and hold the desired signal transmitter button ( 2 , 3 or 4 ). Do not release the button. 왘 Indicator lamp[...]

275 Controls in detail Useful fe atures Programming tips If you are having difficulty programming the integrated remote control, here are some helpful tips: 앫 Check the frequency of the hand-held remote control 5 (typically located on the reverse side of the remote). The in- tegrated remote control is compatible with radio-frequency devices opera[...]

276 Controls in detail Useful f eatures Heated steering wheel* (SLK 280, SLK 350, Canada only) The steering wheel heating warms up the leather area of the steering wheel. The stalk is located on the lower left-hand side of the steering wheel. 1 Switching on 2 Indicator lamp 3 Switching off Switching on 왘 Switch on the ignition ( 컄 page 37). 왘[...]

277 Operation The first 1 000 miles (1 500 km) Driving instructions At the gas station Engine compartmen t Tires and wheels Winter driving Maintenance Vehicle care[...]

278 Operation In the “Operation” section you will find de- tailed information on operating, maintai n- ing and caring for your vehicle. The first 1 000 miles (1 5 00 km) The more cautiously yo u treat your vehicle during the break-in period, the more satisfied you will be with its performance later on. 앫 Drive your vehicle during the first 1 [...]

279 Operation Driving instructions 왔 Driving instructions Drive sensibly – save fuel Fuel consumption, to a great extent, de- pends on driving habits and operating con- ditions. To save fuel you should: 앫 Keep tires at the recommended infla- tion pressures. 앫 Remove unnecessary loads. 앫 Allow engine to warm up under low load use. 앫 Avoi[...]

280 Operation Driving instructions Power assistance Brakes To help prevent brake disc corrosion after driving on wet road surfaces (particularly salted roads), it is advisable to brake the vehicle with considerable force prior to parking. The heat generated serves to dry the brakes. If your brake system is normally only sub- jected to moderate load[...]

281 Operation Driving instructions Refer to the description of the Brake Assi st System (BAS) ( 컄 page 86). Brake pad wear or a leak in the system m ay be the reason for low brake fluid in the res- ervoir. The brake fluid level in the reservoir may be too low if the brake warning lamp in the instrument cluster ( 컄 page 26) comes on although the[...]

282 Operation Driving instructions Driving off Apply the brakes to test them br iefly after driving off. Perform this procedure only when the road is clear of other traffic. Warm up the engine smoothly. Do not place full load on the engine unti l the oper- ating temperature ha s been reached. Parking Wa r n i n g ! G New vehicle brake pads and disc[...]

283 Operation Driving instructions Tires Treadwear indicators (TWI) are required by law. These indicators are located in six places on the tread circumference and become visible at a tread depth of approx- imately 1 / 16 in (1.6 mm), at which point the tire is considered worn and should be re- placed. The treadwear indicator appears as a solid band[...]

284 Operation Driving instructions For more information, see “Tires and wheels” ( 컄 page 304). Hydroplaning Depending on the depth of the water layer on the road, hydroplaning may occur, ev en at low speeds and with new tir es. Reduce vehicle speed, avoid track grooves in the road and apply brakes cautiously in the rain. Tire traction The saf[...]

285 Operation Driving instructions Tire speed rating Regardless of the tire speed rating, local speed limits should be obeyed. Use pru- dent driving speeds appropriate to prevail- ing conditions. An electronic speed limiter prevents your vehicle from exceeding a speed of: 앫 SLK 280 SLK 280 (Sport Package*) SLK 280 (Appearance Package*): 149 mph ([...]

286 Operation Driving instructions Winter driv ing instructio ns The most important rule for slippery or icy roads is to drive sensibly and to avoid abrupt acceleration, braking and steering maneuvers. Do not use the cruise control system under such conditions. When the vehicle is in danger of skidding, move gear selector lever* to p osition N or d[...]

287 Operation Driving instructions Standing water Passenger compartment Driving a broad Abroad, there is an extensive Mercedes-Benz service network at your disposal. If you plan to drive into areas which are not listed in the index of your Mercedes-Benz Center directory, you should request pertinent information from an authorized Merc edes-Benz Cen[...]

288 Operation Driving instructions Telephones and two-way radios Radio transmitters, such as a portable tele- phone or a citizens band unit should only be used inside the vehicle if the y are con- nected to an antenna that is installed on the outside of the vehicle. Refer to the radio transmitter operation instructions regarding use of an external [...]

289 Operation Driving instructions Emission control Certain engine systems serve to keep the toxic components of the exhaust gases within permissible limits required by law. These systems, of course, will function properly only when maintained strictly according to factory specifications. Any adjustments on the engine should therefore only be carri[...]

290 Operation Driving instructions ! Excessive coolant temperature triggers a warning message in the multifunction display ( 컄 page 374). The engine should not be operate d with a coolant temperature above 248°F (120°C). Doing so may caus e serious engine damage which is not covered by t he Mercedes -Benz Limited Warranty. i During severe opera[...]

291 Operation At the gas station 왔 At the gas station Refueling The fuel filler flap is located on the right-hand side of the vehicle towards the rear. Locking and unlocking th e vehicle with the SmartKey automatically locks and unlocks the fuel filler flap. 1 To open fuel filler flap 2 To insert fuel filler cap 왘 Remove the SmartKey from the s[...]

292 Operation At the gas station 왘 Close the fuel filler flap. Check regularly and before a long trip Engine compartmen t (example illustration, SLK 350) 1 Windshield washer system and head- lamp cleaning system* reservoir 2 Brake fluid reservoir 3 Coolant expansion tank Windshield washer system and head- lamp cleaning system* For information on [...]

293 Operation At the gas station Coolant For normal replenishing, use water (potable water quality). For more information on coolant, see “Coolant level” ( 컄 page 300) and “Fuel s, coolants, lubricants, etc.” ( 컄 page 451). Engine oil level For information on engine oil, see “Engine oil” ( 컄 page 296). Vehicle light ing Check func[...]

294 Operation Engine compartment Hood Opening 1 Hood lock release lever Wa r n i n g ! G Do not pull the release lever while the veh i- cle is in motion. Otherwise the hood could be forced open by passing air flow. This could cause the hood to come lo ose and injure you and /or others. Wa r n i n g ! G If you see flames or s moke coming from the en[...]

295 Operation Engine compartment 왘 Pull hood lock release lever 1 in direc- tion of arrow. The hood is unlocked. 2 Lever for opening the hood 왘 Push lever 2 on the hood upward to release hood. 왘 With the hood released, lift the hood by lifting it at the front edge. The hood will be automatically held open at shoulder height by gas-filled stru[...]

296 Operation Engine compartment Engine oil The amount of oil your engine needs will depend on a number of factors, including driving style. Higher oil consumption can occur when 앫 the vehicle is new 앫 the vehicle is driven frequently at higher engine speeds Engine oil consumption checks should only be made after the vehicle break-in period. Ch[...]

297 Operation Engine compartment One of the following messages will subsequently appear in the multifunc- tion display: 앫 Engine Oil Level OK 앫 Add 1.0 qt. (Canada: 1.0 liter ) to reach max. oil level . 앫 Add 1.5 qts. (Canada: 1.5 liters ) to reach max. oil level . 앫 Add 2.0 qts. (Canada: 2.0 liters ) to reach max. oil level . 왘 If necess[...]

298 Operation Engine compartment If there is excess engine oil with the engine at normal operating temperature, the following message will appear: Engine Oil Level Reduce Oil Level 왘 Have excess oil siphoned or drained off. Contact an authorized Mercedes-Benz Center. For more information on messages in the display concerning engine oil, see the ?[...]

299 Operation Engine compartment 왘 Pull out oil dipstick 1 again after approximately 3 seconds to obtain accurate reading. The oil level is correct when it is be- tween the lower (min) mark 3 and upper (ma x) mark 2 of oil dipstick 1 . 왘 If necessary, add engine oil. For adding engine oil, see “Addi ng engine oil” ( 컄 page 299). For more [...]

300 Operation Engine compartment 왘 Unscrew filler cap 1 from filler neck. 왘 Add engine oil as required. Be careful not to overfill with oil. Be careful not to spill any oil when adding. Avoid environmental damage caused by oil entering the ground or water. 왘 Screw filler ca p 1 back on filler neck. For more information on engine oil, see “T[...]

301 Operation Engine compartment The coolant expansion tank i s located on the passenger side of the engine compart- ment. SLK 350 (example illustration) 1 Coolant expansion tank 2 Cap 3 Marking bar in the expansion tank 왘 Using a rag, turn cap 2 slowly approx- imately o ne half turn co unterclockw ise to release any excess pressure. 왘 Continue[...]

302 Operation Engine compartment During all seasons, add MB Windshield Washer Concentrate “MB SummerFit” to water. Premix the wind shield washer fluid in a suitable container. 왘 Use the tab to pull cap 1 upwards. 왘 Refill the reservoir with MB Windshield Washer Concentrate “MB SummerFit” and water (or commercially available premixed win[...]

303 Operation Engine compartment Batteries contain materials that can harm the environment if disp osed of improperly. Recycling of batteries is the preferred method of disposal. Many states require sellers of batteries to accept old batteries for recycling. Wa r n i n g ! G Observe all safety instructions and precau- tions when handling automotive[...]

304 Operation Tires and wheels Contact an authorized Mercedes-Benz Center for information on tested and recommended rims and tires for summer and winter operation. They can also offer advice concerning tire service and purchase. Important guidelines 앫 Only use sets of tires and rims of the same type and make. 앫 Tires must be of the correct size[...]

305 Operation Tires and wheels Tire care and maintenance Regularly check your tire inflation pressure at least once a month. For more informa- tion on checking tire inflation pressure, see “Recommended tire inflation pres- sure” ( 컄 page 311). Tire inspection Every time you check your tire inflation pressure, you should also i nspect your tir[...]

306 Operation Tires and wheels Tread depth Do not allow your tires to wear down too far. Adhesion properties on wet roads are sharply reduced at tread depths of less than 1 / 8 in (3 mm). Treadwear indicators (TWI) are requi red by law. These indicators are located in six places on the tread circumference and become visible at a tread depth of appr[...]

307 Operation Tires and wheels Direction of rotation Unidirectional tires offer added advan- tages, such as better hydroplaning perfor- mance. To benefit, however, you must make sure the tires rotate in the direction specified. An arrow on the sidewall indicates the intended direction of rotation (spinning) of the tire. Loading the vehicle Two labe[...]

308 Operation Tires and wheels Tire and Loading Information Tire and Loading Information placard 1 Load limit information on the Tire and Loading Information placard The Tire and Loading Information placard showing the load limit information is located on the driver ’s door B-pillar ( 컄 page 307). 왘 Locate the statement “The combined weight[...]

309 Operation Tires and wheels 1 Seating capacity information on the Tire and Loading Informa tion placard Steps for determining correct load limit The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 19[...]

310 Operation Tires and wheels The higher the weight of all occupants, the less cargo and luggage load capacity is available. For more information, see “Trailer tongue load” ( 컄 page 311). Example Combin ed weight limit of occupants and cargo from Tire and Lo ading Information placard Number of occupants (driver and passengers) Occupants weig[...]

311 Operation Tires and wheels Certification label Even after careful determination of the combined weight of all occupants, cargo and the trailer tongue load (if applicable) ( 컄 page 311) as to not exceed the permis- sible load limit, you must make sure that your vehicle never exceeds the Gross Vehi- cle Weight Rating (G VWR) and the Gross Axle [...]

312 Operation Tires and wheels Your vehicle is equipped with the Tire and Loading Information placard located on the driver’s door B-pillar ( 컄 page 307 ). The tire inflation pressure should be checked regularly and should only be ad- justed on cold tires. The ti res can be con- sidered cold if the vehicle has been parked for at least three hou[...]

313 Operation Tires and wheels Important notes on tire inflat ion pressure Tire temperature and tire inflation pressure are also increased while driving, depending on the driving speed and the tire load. If you will be driving your vehicle at high speeds of 100 mph (160 km/h) or higher, where it is legal and conditions allow, consult the tire infla[...]

314 Operation Tires and wheels Checking tire infl ation pressure manually Follow the steps below to achieve correct tire inflation pressure: 왘 Remove the cap from the valve on one tire. 왘 Firmly press a tire gauge onto the valve. 왘 Read tire inflation pressure on tire gauge and check against the recom- mended tire inflation pressure on the Ti[...]

315 Operation Tires and wheels Run Flat Indicator* (Cana da only) While the vehicle is being driven, the Run Flat Indicator monitors the set tire inflation pressures by evaluating each wheel’s rota- tional speed. This allows the system to de- tect a significant loss of pressure in a tire. If a wheel’s rotational speed changes due to falling tir[...]

316 Operation Tires and wheels Restarting the Run Flat Indicator The tire inflation pressure monitor must be restarted in the following situations: 앫 If you have changed the tire inflation pressure 앫 If you have replaced the wheels or tires 앫 If you have installed new wheels or tires 왘 Using the Tire and Loading Information placard on the d[...]

317 Operation Tires and wheels Checking tire pressure electroni cally with the Tire Pressure Monitoring System (TPMS), (USA only) The TPMS only functions on wheels that are equipped with th e proper electronic sensors. It monitors the tire inflation pres- sure, as s elected by the drive r, in all fou r tires. A warning is issued to alert you to a d[...]

318 Operation Tires and wheels Wa r n i n g ! G Each tire, incl uding th e spare (if provided), should be checked monthly when cold and inflated to the infl ation pressure recom- mended by the vehicle manufacturer on the Tire and Loading Information placard or, if available, on the tire inflation pressure label. If your vehicle has tires of a diffe[...]

319 Operation Tires and wheels Tire inflation press ure warnin gs If the system detects a significant loss of tire inflation pressure in one or more than one tire, a mess age appears in the multi- function display. Example illustration In addition, a warning signal sounds. Restarting the TPMS The TPMS must be restarted when you have adjusted the ti[...]

320 Operation Tires and wheels 왘 Press reset button J ( 컄 page 118). The following message will appear in the multifunction display: Restart tire pressure monitor? 왘 Press button æ . The following message will appear in the multifunction display: Tire Pressure Monitor Restarted After driving a few minutes the current tire inflation pressure [...]

321 Operation Tires and wheels MO Extended system* The MO Extended system allows you to continue driving your vehicle even if there is a total loss of pressure in one or more tires. You may only use the MO Exten ded system in conjunction with the Run Flat Indicator* (Canada vehicles) ( 컄 page 315) or TPMS (U. S. vehicles) ( 컄 page 317). For inf[...]

322 Operation Tires and wheels Tire size designatio n, load and spee d rating 1 Tire width 2 Aspect ratio in % 3 Radial tire code 4 Rim diameter 5 Tire load rating 6 Tire speed rating General: Depending on the design standards used, the tire size molded into the sidewall may have no letter or a letter preceding the tire size designation. No letter [...]

323 Operation Tires and wheels Rim diameter The rim diameter 4 ( 컄 page 322) is the diameter of the bead seat, not the diameter of the rim edge. Rim diameter is indicated in inches (in). Tire load ratin g The tire load rating 5 ( 컄 page 322) is a numerical code associated with the maximum load a tire can support. For example, a load rating of 9[...]

324 Operation Tires and wheels Summer tires 앫 At the tire manufacturer’s option, any tire with a speed capability above 149 mph (240 km/h) can include a “ZR” in the size designation (for exam- ple: 245/40 ZR18). To determine the maximum speed capa bi lity of the ti re, the service description for the tire must be referred to. The service de[...]

325 Operation Tires and wheels All-season and winter tires Load identi fication 1 Load identification In addition to tire load rating, special load identification 1 may be molded into the tire sidewall following the letter designat- ing the tire speed rating ( 컄 page 322). No specification given: absence of any text (like in above example) indica[...]

326 Operation Tires and wheels DOT, Tire Identifica tion Number (TIN) U.S. tire regulations require each new tire manufacturer or tire retreader to mold a TIN into or onto a sidewall of each tire produced. The TIN is a unique identifier which facili- tates efforts by tire manufactures to notify purchasers in recall situations or other safety matter[...]

327 Operation Tires and wheels Tire type code The code 4 ( 컄 page 326) may, at the option of the manufacturer, be used as a descriptive code for identifying significant characteristics of the tire. Date of manufacture The date of manufacture 5 ( 컄 page 326) identifies the week and year of manufac- ture. The first two figures identify the week, [...]

328 Operation Tires and wheels Maximum tire inflation pressure 1 Maximum permissible tire inflation pressure This is the maximum permissible tire inflation pressure for the tire. Always follow the recommended tire inflation pressure ( 컄 page 311) for proper tire inflation. Uniform Tire Quality Grading Standards (U.S. vehicles) Tire manufacturers [...]

329 Operation Tires and wheels Quality grades can be found, where appli- cable, on the tire sidewall between tread shoulder and maximum section width. For example: All passenger car tires must conform to federal safety requirements in addition to these grades. Treadwear The treadwear grade is a comparative rat- ing based on the wear rate of the tir[...]

330 Operation Tires and wheels Temperature The temperature grades are A (the high- est), B, and C, representing the tire’s resis- tance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel . Sustained high tem- perature can cause the material of the tire to[...]

331 Operation Tires and wheels Tire and loading terminology Accessory weight The combined weight (in exces s of those standard items which may be repl aced) of automatic transmission, power steering, power brakes, power windows, power seats, radio, and heater, to the extent that these items are available as factory-installed equipment (whether inst[...]

332 Operation Tires and wheels GVWR (G ross V ehicle W eight R ating) This is the maximum permissible vehicle weight of the fully loaded vehicle (weight of the vehicle including all options, passen- gers, fuel, and cargo and, if applicable, trailer tongue load). It is indicated on certification label located on the driver’s door B-pillar. Kilopas[...]

333 Operation Tires and wheels TIN (T ire I dentification N umber) Unique identifier whic h facilitates efforts by tire manufacturers to notify purchasers in recall situations or other safety matters concerning tires and gives purchases the means to easily identify such tires. The TIN is comprised of “Manufacturer’s identifica- tion mark”, ?[...]

334 Operation Tires and wheels Rotating ti res Tire rotation can be performed on vehicles with tires of the same dimension all around. If your vehicle is equipped with tires of the same dimension all around, tires can be r otated, observing a front-to-rear rotation pattern that will maintain the intended rotation (spinning) direction of the tire ( [...]

335 Operation Winter driving 왔 Winter driving Before the onset of winter, have your vehicle winterized at an authorized Mercedes-Benz Center. This service includes: 앫 Checking anticorrosion and antifreeze concentration. 앫 Adding of cleaning concentrate to the water of the windshield and headlamp cleaning* system. Add MB Windshield Washer Conc[...]

336 Operation Winter driving Snow chains Snow chains should only be driven on snow-covered roads at speeds not higher than 30 mph (50 km/h). Remove chains as soon as possible when driving on roads without snow. Please observe the following guidelines when using snow chains: 앫 Use of snow chains is not permissible with all wheel/tire combinations [...]

337 Operation Maintenance 왔 Maintenance We strongly recommend that you have your vehicle serviced by an authorized Mercedes-Benz Center, in accordance with the Maintenance Booklet at the times called for by the maintenance service indi- cator. Maintenance se rvice indicator message The maintenance service indicator message will notify you when th[...]

338 Operation Maintenanc e Clearing the maintenance se rvice indicator message The maintenance service indicator message is automatically cleared: 앫 after approximately 10 seconds when you switch on the ignition or when reaching the service threshold while driving 앫 after approximately 30 seconds once the suggested maintenance service term has [...]

339 Operation Maintenance Resetting the maintenance service indicator In the event that th e maintenance service on your vehicle is not carried out by an authorized Mercedes-Benz Center, you can have the maintenance service indicator reset. The automotive maintenance facility carrying out the maintenance service will find the information for resett[...]

340 Operation Vehicle care Cleaning and ca re of vehicle Regular and proper care will help to main- tain the value of your vehicle. The best way to protect your vehicle from harmful envi- ronmental influences is to wash it and use protective treatments regularly. While in operation, even while parked, your vehicle is subjected to varying external i[...]

341 Operation Vehicle care of incompatibility between materials used in the production process and others applied later. We have selected car-car e products and compiled recommendations which are specially matched to our vehicles and which always reflect the latest technology. You can obtain Mercedes-Benz approved car-care produc ts at an authorize[...]

342 Operation Vehicle care Engine cleaning Prior to cleaning the engine compartment, make sure to protect electrical compo- nents and connectors from the intrusion of water and cleaning agents. Corrosion protection, such as MB Anticorrosion Wax should be applied to the engine compartment after every en- gine cleaning. Before applying, all control l[...]

343 Operation Vehicle care Ornamental moldings For regular cleaning and care of very dirty chrome-plated parts, use a chrome clean- er. Headlamps, tail lamps, side makers, turn signal lenses 왘 Use a mild car wash detergent, s uch as Mercedes-Benz approved Car Shampoo, with plenty of water. Cleaning the windows and the wiper blades 왘 Make sure t[...]

344 Operation Vehicle care 왘 Fold the w iper arms forw ard until the y snap into place. 왘 Clean the wiper blade inserts with a clean cloth and detergent solution. 왘 Use a clean cloth and a mild window cleaning solution on all outside and inside glass surfaces. An automotive glass cleaner is recom- mended. Rear window cleaning Clean the rear w[...]

345 Operation Vehicle care Plastic and rubber parts 왘 Use a gentle dishwashing detergent or mild detergent for delicate fabrics as a washing solution. 왘 Wipe with a cloth moistened in a luke- warm solution. The surface may temporarily change color. If this is the case, wait for i t to dry. Hard plasti c trim items 왘 Use Mercedes-Benz approved[...]

346 Operation Vehicle care Seat belts 왘 Use only clear, lukewarm water and soap. Upholstery Using aftermarket seat covers or w earing clothing that have the tendency to give off coloring (e.g. when wet, etc.) may cause the upholstery to become permanently discolored. By lining the seats with a proper intermediate cover, contact-discoloration will[...]

347 Practical hints What to do if … Where will I find...? Unlocking/locking in an emergency Opening/closing in an emergency Replacing SmartKey batteries Replacing bulbs Replacing wiper blades Flat tire Battery Jump starting Towing the vehicle Fuses[...]

348 Practical hints What to do if … Lamps in instrument cluster General information: If any of the following lamps in the instru- ment cluster fails to come on during the bulb self-check when switching on ignition ( 컄 page 37), have th e respective bulb checked and replaced if necessary. Problem Possible cause/consequence Suggested solution - T[...]

349 Practical hints What to do if … Problem Possible cause/consequence Suggested solution - The yellow ABS indicator lamp comes on when the engine is running. The ABS is temporary not available. The ESP ® and the BAS are also un- available. The system’s self-diagnosis may not be completed yet. The brake system is still functioning normally but[...]

350 Practical hints What to do if … Problem Possible cause/consequence Suggested solution USA only: ; Canada only: 3 The red brake warning lamp comes on when the engine is running and an acoustic warning sounds. You are driving with the parking brake set. 왘 Release the parking brake ( 컄 page 53). The red brake warning lamp comes on when the e[...]

351 Practical hints What to do if … Problem Possible cause/conseq uence Suggested solution USA only: ? Canada only: ± The yellow engine malfunction indicator lamp comes on when the engine is running. There is a malfunction in: 앫 The fuel injection system 앫 The ignition system 앫 The emission control system 앫 Systems which effect emissions[...]

352 Practical hints What to do if … Problem Possible cause/consequence Suggested solution v The yellow ESP ® warning lamp comes on when the engine is running. The ESP ® has been switched off with the ESP ® switch or has been switched off due to a malfunction. Risk of accident! When the ESP ® is switched off, it will not stabilize the vehicle [...]

353 Practical hints What to do if … Problem Possible cause/conseque nce Suggested solution < The red seat b elt telltal e comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passenger to fasten your seat belts before driving off. 왘 Fasten your seat belts. Regardless of whether the seat b[...]

354 Practical hints What to do if … Problem Possible cause/conseq uence Suggested solution < During driving the red seat belt telltale flashes and you addition- ally hear an intermittent warning chime sound with increasing in- tensity. The vehicle’s speed once exceeds 15 mph (25 km/h) and you and/or your passenger have forgotten to fasten yo[...]

355 Practical hints What to do if … Problem Possible cause/consequence Suggested solution 4 The yellow fuel reserve warning lamp flashes after starting the engine. The fuel cap is not closed properly. 왘 Close the fuel cap. The yellow fuel reserve warning lamp comes on when the engine is running. Additionally you see the message Reserve Fuel in [...]

356 Practical hints What to do if … Problem Possible cause/conseque nce Suggeste d solution H USA only: Combination low tire pressure/TPMS malfunction telltale for the TPMS illuminates continuously. The TPMS detects a loss of pressure in at least one tire. 왘 Carefully bring the vehi cle to a halt, avoiding abrupt steering and braking maneuvers.[...]

357 Practical hints What to do if … Wa r n i n g ! G Each tire, including th e spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recom- mended by t he vehicl e manufact urer on th e Tire and Lo ading Informat ion placar d on the driver’s door B-pillar ( 컄 page 307) or, if available, the tire infla[...]

358 Practical hints What to do if … Lamp in center cons ole Problem Possible cause/consequence Suggested solution 75 The passenger front air bag off in- dicator lamp illuminates and re- mains illuminated with the weight of a typical adult or someone larg- er than a small individual on the passenger seat. The system is malfunctioning. 왘 Have the[...]

359 Practical hints What to do if … Problem Possible cause/consequence Suggested solution 75 The front passenger front air bag off indicator lamp does not illumi- nate and/or does not remain illu- minated with the weight of a typical 12-month-old child in a standard child restraint or less on the passenger seat. The system is malfunctioning. 왘 [...]

360 Practical hints What to do if … Vehicle status messages in the multifunct ion display Warning and malfunction messages appear in the multifunction display located in the instrument cluster. Certain warning and malfunction messag- es are accompanied by an audible signal. Address these messages accordingly and follow the additional instructions[...]

361 Practical hints What to do if … On the pages that follow, you will find a compilation of the most important warn- ing and malfunction messages that may appear in the multifunction display. For your convenience the messages are divided into two sections: 앫 Text messages ( 컄 page 362) 앫 Symbol messages ( 컄 page 371) Wa r n i n g ! G No [...]

362 Practical hints What to do if … Text messages Display message Possible cause/consequence Possible solution ABS ABS, ESP Inoperative See Operators’s Manual The ABS and ESP ® are not available due to a malfunction. The BAS is also deactivated. The brake system is still functioning normally but without the systems specified above. 왘 Continu[...]

363 Practical hints What to do if … Display message Possible cause/consequence Possible soluti on ESP Unavailable See Operator’s Manual The ESP ® is temporarily not available. The system’s self-diagnosis may not be completed yet. The ABS and the BAS might not be operational. The brake system is still functioning normally but without the syst[...]

364 Practical hints What to do if … Display message Possible cause/conseque nce Possible solution SRS Restraint System Malfunction Service Required There is a malfunction in the supple- mental restraint systems. The air bags or emergency tensioning devices (ETDs) could deploy unexpectedly or fail to activate in an accident. 왘 Drive with added c[...]

365 Practical hints What to do if … Display message Possible cause/consequence Possible solution Front-passenger Airbag Enabled See Operator’s Manual The passenger front air bag and the passenger-side knee bag are activated while driving even though a child, small individual, or object belo w the system’s weight threshold is on the passenger [...]

366 Practical hints What to do if … Display message Possible cause/consequence Possible solution With the seat unoccupied and the ignition switched on, 앫 the 75 indicator lamp on the center console should illuminate and remain i lluminated, indicating that the OCS ( 컄 page 71) has deactivated the pa ssenger front air bag and the passenger-sid[...]

367 Practical hints What to do if … Display message Pos sible cause/consequence Possible solution Front-passenger Airbag Disabled See Operator’s Manual The passenger front air bag and the passenger-side knee bag are deactivated while driving even though an adult or someone larger than a small individual is occupying the front passenger seat. Fo[...]

368 Practical hints What to do if … Display message Possible cause/consequence Possible solution With the seat unoccupied and the ignition switched on, 앫 the 75 indicator lamp on the center console should illuminate and remain illumina ted, indicating that the OCS has deactivated the passenger front ai r bag and the passenger-side knee bag. 앫[...]

369 Practical hints What to do if … Display message Possible cause/consequence Possible solution Check tires, then restart Run Flat Indicator. There was a warning message about a loss in tire inflation pressure and the Run Flat Indicator* has not been restarted yet. 왘 Make sure that th e correct tire inflation pressure i s set for each ti re. ?[...]

370 Practical hints What to do if … Display message Possible cause/consequence Possible solution Tire Pressure Monitor Inoperative The TPMS is malfunctioning. 왘 Have the TPMS checked by an authorized Mercedes-Benz Center. Tire Pressure Monitor Inoperative No Wheel Sensors There are wheels without appropriate wheel sensors mounted (e.g. winter t[...]

371 Practical hints What to do if … Symbol messages Display symbol Display message Possible cause/consequence Possible solution Ê This message will appear whenever the trunk lid is open. 왘 Close the trunk lid. O You are driving with the hood open. Risk of accident! 왘 Stop the vehicle in a safe location or as soon as it is safe to do so. 왘 [...]

372 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possib le solution # The battery is no longer charging. Possible causes: 앫 Alternator malfunctioning 앫 Broken poly-V-belt Do not forget that the brake system requires electrical energy and may be operating with restricted capa- bility. Considerably g[...]

373 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possible solution USA only: ; Canada only: 3 Check Brake Fluid Level There is insufficient brake fluid in the reservoir. 왘 Risk of accident! 왘 Stop the vehicle in a safe location or as soon as it is safe to do so. 왘 Turn off the engine. 왘 Apply t[...]

374 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possible solution • Coolant Stop, turn engine off . The coolant is too ho t. Among other possible causes, the poly-V-belt could be broken. 왘 Stop the vehicle in a safe location or as soon as it is safe to do so. 왘 Turn off the engine. 왘 Apply the[...]

375 Practical hints What to do if … During severe operating conditions, e.g. stop-and-go traffic, the coolant tempera- ture may rise close to 248°F (120°C). Display symbol Display message Possible cause/consequence Possible solution 왘 Observe the coolant temperature display ( 컄 page 127). If the temperature rises again: 왘 Contact an autho[...]

376 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possib le solution / Top Up Coolant See Operator’s Manual The coolant level is too low. 왘 Add coolant ( 컄 page 300). Comply with all warnings while doing so. 왘 If you have to add coolant frequently, have the cooling system checked by an au- thori[...]

377 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possible solution ± Display Malfunction Drive To Workshop Certain electronic systems are un- able to relay information to the con- trol system. The following systems may have failed: 앫 Coolant temperature display 앫 Tachometer 앫 Cruise control disp[...]

378 Practical hints What to do if … When the message Add 1 qt. (Canada: 1 liter ) engine oil when next refueling (SLK 55 AMG) or Check oil level when next refueling (SLK 280, SLK 350) appears while the engine is run- ning and at operatin g temperature, the en- gine oil level has dropped to approximately the minimum level. When this occurs, the wa[...]

379 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possible solution N Engine Oil Level Reduce Oil Level SLK 55 AMG only: You have added too much engine oil. There is a risk of damaging the engine or the catalytic converter. 왘 Have oil siphoned or drained off. Observe all legal requirements with respec[...]

380 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possible solution K Retractable Roof Operation Please Wait The on-board voltage is too low. 왘 Start the engine. The hardtop drive system was shut down for safety reasons after multiple, consecutive attempts to raise or lower the hardtop. After about 10[...]

381 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possible solution I Please get a new key. The SmartKey is malfunctioning. 왘 Contact an authorized Mercedes-Benz Center. Remove Key You have forgotten to remove the SmartKey from the starter switch. 왘 Remove the SmartKey from the starter switch. . 3rd[...]

382 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possib le solution . Brake-/Tail Lamp Left The left brake lamp is malfunction- ing. This message will only appear if a critical number of LEDs have stopped working. 왘 Contact an authorized Mercedes-Benz Center as soon as possible. Brake-/Tail Lamp Righ[...]

383 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possible solution . High Beam Right The right high beam lamp (halogen headlamps)/high beam flasher lamp (Bi-Xenon* headlamps) is malfunctioning. 왘 Replace the bulb as soon as possible ( 컄 page 400). License Plate Lamp Left The left license plate lamp[...]

384 Practical hints What to do if … Display symbol Display message Possible cause/conseque nce Possible solution . Low Beam Right The right low beam lamp is malfunc- tioning. Halogen headlamp : 왘 Replace the bulb as soon as possible ( 컄 page 400). Bi-Xenon* headlamp: 왘 Contact an authorized Mercedes-Benz Center as soon as possible. Parking [...]

385 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possible solution . Marker Lamp Rear Right The right rear side marker lamp is malfunctioning. This message will only appear if a critical number of LEDs have stopped working. 왘 Contact an authorized Mercedes-Benz Center as soon as possible. Tail Lamp, [...]

386 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possib le solution . Left Mirror Turn Signal The left turn signal in the side mirror is malfunctioning. This message will only appear if a critical number of LEDs have stopped working. 왘 Contact an authorized Mercedes-Benz Center as soon as possible. R[...]

387 Practical hints What to do if … Display symbol Display messages Possible cause/consequence Possible solution H Please correct the tire pressure. The tire pressure is too low in one or more tires. 왘 Check and correct tire inflation pressure as required ( 컄 pa ge 313). Tire Pressure Caution - Tire Def ect One or more tires are deflating. ?[...]

388 Practical hints What to do if … Display symbol Display message Possible cause/consequence Possib le solution t PHONE OFF This display appears if button s or t on the multifunction steer- ing wheel is pressed and the vehicle is not equipped with a telephone*. M Trunk Partition Open You are trying to open or close the retractable hardtop even t[...]

389 Practical hints Where will I find...? 왔 Where will I find...? First aid kit The first aid kit is st ored in a parcel net behind the driver’s seat. Vehicle tool kit , vehicle jack The vehicle tool kit is stored in a storage compartment under the trunk floor. The following is included: 앫 Collapsible wheel chock 앫 Vehicle jack 앫 Protecti[...]

390 Practical hints Where will I find...? 1 Collapsible wheel chock 2 Vehicle jack 3 Protective wrap 4 Alignment bolt 5 Towing eye bolt 6 Wheel wrench 7 Valve extractor 8 Electric air pump Vehicles with TIREFIT* 1 TIREFIT kit 2 Vehicle jack 3 Collapsible wheel chock 4 Towing eye bolt 5 Alignment bolt 6 Wheel wrench 7 Valve extractor 8 Electric air [...]

391 Practical hints Where will I find...? The vehicle jack is located in the storage compartment undernea th the trunk floor. Storage posit ion 왘 Remove vehicle jack from i ts compartment. 왘 Turn crank handle in the direction of arrow as far as it will go. Operational position 왘 Turn crank handle clockwise. Before storing the vehicle jack in [...]

392 Practical hints Where will I find...? 왘 Tilt both plates upward 1 . 왘 Fold the l ower plate o utward 2 . 왘 Guide the tabs of the lower plate all the way into the openings of the base plate 3 . For information on where to place wheel chocks when changing a wheel, see “Lifting the vehicle” ( 컄 page 414). Spare wheel with collapsible t[...]

393 Practical hints Where will I find...? 왘 Unscrew the valve insert from the valve and allow the air to escape. 왘 Screw the valve insert back into the valve. 왘 Screw the valve cap back on the valve. 왘 Pull the protective wrap provided with the vehicle tool kit over the spare wheel. 왘 Store the spare wheel and the valve extractor in the s[...]

394 Practical hints Unlocking/locking in an emergency Unlockin g the veh icle If you cannot unlock the vehicle with the SmartKey, open the driver’s door and the trunk using the mechanical key. Removing the mechanical key 1 Mechanical key locking tab 2 Mechanical key 왘 Move locking tab 1 in direction of arrow. 왘 Slide mechanical key 2 out of t[...]

395 Practical hints Unlocking/locking in an emergency Unlocking and opening the trunk A minimum height clearance of 5.78 ft (1.76 m) is required to open the trunk lid. 왘 Insert mechanical key 3 into the trunk lid loc k unti l it stop s. 왘 Turn mechanical key 3 counterclock- wise to position 1 until it stops, and simultaneously 왘 pull trunk li[...]

396 Practical hints Unlocking/locking in an emergency 왘 Insert mechanical key 2 into the driver’s door lock until it stops. 왘 Turn mechanical key 2 clockwise to position 1 . The driver’s door is locked. 왘 Turn back mechanical key 2 and remove it from driver’s door lock. Manually unlo cking the gear selector lever (auto matic tran smissi[...]

397 Practical hints Opening/closing in an emergency 왔 Opening/closing in an emergency Raising retractable hardtop manually Wa r n i n g ! G If the retractable hardtop does not com- pletely open or close, the roof hydraulics will lose pressure and the retractable hardtop is lowered 앫 after approximately 7 minutes when the ignition is switched on[...]

398 Practical hints Replacing SmartKey batteries If the batteries in the SmartKey are discharged, the vehicle can no longer be locked or unlocked. It is recommended to have the batteries replaced at an autho- rized Mercedes-Benz Center. Batteries contain materials tha t can harm the environment if disposed of improperly. Recycling of batteries is t[...]

399 Practical hints Replacing SmartKey batteries 3 Batteries 4 Contact springs 왘 Pull out batteries 3 . 왘 Using a lint-free cloth, insert new batteries 3 under contact springs 4 with the positive terminal (+) side facing up. 왘 Return battery compartment 2 ( 컄 page 398) into the housi ng until it locks into place. 왘 Slide the mechanical ke[...]

400 Practical hints Replacing bulbs Bulbs Safe vehicle operati on depends on proper exterior lighting and si gnaling. It is there- fore essential that all bulbs and lamp assemblies are in good working order at all times. Correct headlamp adjustment is extremely important. Have headlamps checked and readjusted at regular intervals and when a bulb ha[...]

401 Practical hints Replacing bulbs Front lamps Lamp Type 1 Additional turn signal lamp LED 2 Turn signal lamp 3457 AK 3 Halogen headlamp: Low beam H7 (55 W) Bi-Xenon* headlamp: Low and high beam 1 1 Vehicles with Bi-Xenon* headlamps: Low beam and high be am use the same D2S-35W lamp. Do not replace the Bi-Xenon* bulbs yourself. Contact an authoriz[...]

402 Practical hints Replacing bulbs Rear lamps Notes on bulb replacement 앫 Only use 12-volt bulbs of the same type and with the specif ied watt rati ng. 앫 Switch the lights off before replacing a bulb to prevent short circuits. 앫 Always use a clean lint-free cloth when handling bulbs. 앫 Your hands should be dry and free of oil and grease. ?[...]

403 Practical hints Replacing bulbs Replacing bulbs for fr ont lamps Before you start to replace a bulb for a front lamp, do the following first: 왘 Turn the exterior lamp switch to position M ( 컄 page 109). 왘 Open the hood ( 컄 page 294). 1 Housing cover for low beam (halogen headlamps only) Housing cover for Bi-Xenon* head- lamps. Do not re[...]

404 Practical hints Replacing bulbs Low beam bulb (Halogen headlamps only) 왘 Turn housing cover 1 counterclock- wise and remove. 왘 Turn bulb socket 5 with the bulb counterclockwise and remove. 왘 Pull the bulb out of bulb socket 5 . 왘 Press the new bulb into bulb socket 5 . 왘 Place bulb socket 5 back into the lamp and turn it clockwise. ?[...]

405 Practical hints Replacing bulbs 왘 Fold corresponding trim to side. 왘 Turn the respective bulb socket coun- terclockwise and remove. 왘 Press gently onto the bulb and turn counterclockwise out of its bulb sock- et. 왘 Press the new bulb gently into its bulb socket and turn clockwise. 왘 Reinstall the bulb socket and turn clockwise until i[...]

406 Practical hints Replacing wiper blades Placing wiper arms in vertical position 1 Wiper arms 왘 Turn the SmartKey in the starter switch to position 1 ( 컄 page 37). 왘 Turn combination switch to wiper setting II ( 컄 page 56). 왘 With wiper arms 1 in vertical position, turn the SmartKey in the starter switch to position 0 . 왘 Remover the [...]

407 Practical hints Replacing wiper blades Removing wiper blades 왘 Fold the wiper arms forward until they engage. 1 Wiper blade 2 Tabs 3 Attachment 4 Cover 왘 Press tabs 2 together and tilt wiper blade 1 in direction of arrow. Tabs 2 on both recesses of attachment 3 are detached. 왘 Maintaining its tilted position, remov e wiper blade 1 out of [...]

408 Practical hints Flat tire The SLK 55 AMG with Performance Package* is equipped with a TIREFIT kit. Preparing the vehicle 왘 Park the vehicle in a safe distance from moving traffic on a hard, flat surface when possible. 왘 Turn on the hazard warni ng flashers. 왘 Turn the steering wheel so that the front wheels are in a straight ahead positio[...]

409 Practical hints Flat tire Wa r n i n g ! G Take care not to allow the contents of TIREFIT to come in contact with hair, eyes or clothing. TIREFIT is harmful if inhaled, swallowed or absorbed through the skin – causes skin, eye and respiratory irritation. Any contact with eyes or skin should be flushed immediately wit h plenty of water. If clo[...]

410 Practical hints Flat tire Version 1 1 TIREFIT container 2 Notch 3 Electric air pump switch 4 Electrical plu g 5 Air hose 6 Flange 7 Flap Version 2 1 TIREFIT container 2 Notch 3 Electric air pump switch 4 Electrical plug 5 Air hose 6 Flange 왘 Open flap 7 on the electric air pump (version 1 on ly) . 왘 Pull plug 4 and air hose 5 out of the pum[...]

411 Practical hints Flat tire Version 1 a Vent screw b Pressure gauge 왘 Close vent screw a on pressure gauge b (version 1 only) . 왘 Screw filler hose 8 onto tire valve 9 ( 컄 page 410). 왘 Insert electrical plug 4 ( 컄 page 410) into the cigarette lighter ( 컄 page 256). 왘 Turn the SmartKey in the start er switch to position 1 ( 컄 page [...]

412 Practical hints Flat tire 왘 After attaining a tire infl ation pressure of 26 psi (1.8 bar), press 0 on electric air pump switch 3 ( 컄 page 410). The electric air pump is switched off. 왘 Turn the SmartKey in the starter switch to position 0 ( 컄 page 37). 왘 Detach the electric air pump. The air hose may still be hot. Please exercise app[...]

413 Practical hints Flat tire Version 2 a Deflate button b Pressure gauge 왘 If the tire inflation pres sure is at least 20 psi (1.3 bar), inflate or deflate the tire to correct tire inflation pressure (see placard on the driver’s door B-pillar): 왘 To increase tire inflation pressure: Switch on the electric air pump. 왘 To decrease tire infla[...]

414 Practical hints Flat tire Mounting the spare wh eel Preparing the vehicle 왘 Prepare the vehicle as described ( 컄 page 408). 왘 Take the spare wheel, wheel wrench, wheel bolts, jack, and electric air pump out of the trunk ( 컄 page 389). Lifting th e vehicle 왘 Prevent the vehicle from rolling away by blocking wheels with wheel chocks or [...]

415 Practical hints Flat tire 1 Wheel wrench 왘 On wheel to be changed, loosen but do not yet remove the wheel bolts in direc- tion of arrow (approximately one full turn with wheel wrench 1 ). The jack take-up brackets are located di- rectly behind the front wheel housings and in front of the rear wheel housings. 2 Jack 3 Take-up bracket 왘 Place[...]

416 Practical hints Flat tire 왘 Jack up the vehicle until the wheel is a maximum of 1.2 in (3 cm) from the ground. Removing the wheel 4 Alignment bolt 왘 Unscrew the upper-most wheel bolt and remove. 왘 Replace this wheel bolt with alignment bolt 4 supplied in the vehicle tool kit ( 컄 page 389). 왘 Remove the remaining bolts. 왘 Remove the [...]

417 Practical hints Flat tire 왘 Clean contact surfaces of wheel and wheel hub. 왘 Guide the spare wheel onto the align- ment bolt and push it on. 왘 Insert the wheel bolts and tighten them slightly. ! Wheel bolts 2 must be u sed when mount- ing the spare wheel with collapsible tire. The use of any wheel bolts other than wheel bolts 2 for the sp[...]

418 Practical hints Flat tire 왘 Unscrew the alignment bolt, install last wheel bolt and tighten slightly. 왘 Inflate the collapsibl e tire ( 컄 page 418). Inflating the collapsi ble tire 1 Flap 2 Air pump switch 3 Electrical plug 4 Air hose with pressure gauge and vent screw 5 Union nut 왘 Take the electric air pump out of the trunk ( 컄 page[...]

419 Practical hints Flat tire 왘 Press I on electric air pump switch 2 . The electric air pump switches on and inflates the collapsible tire. 왘 Inflate the collapsible tire to approxi- mately 51 psi (3.5 bar). This takes about 5 minutes. Air hose 4 and union nut 5 can become hot during inflation. Exercise proper caution to avoid burning yourself[...]

420 Practical hints Flat tire Lowering the vehicle 왘 Lower vehicle by turning the crank counterclockwise until vehicle is resting fully on its own weight. 왘 Remove the jack. 1 - 5 Wheel bolts 왘 Tighten the five wheel bolts evenly i n the direction of the arrow, following the diagonal sequence illustrated ( 1 to 5 ), until all bolts are tight.[...]

421 Practical hints Flat tire MO Extended system* The MO Extended system allows you to continue driving your vehicle even if there is a total loss of pressure in one or more tires. You may only use the MO Exten ded system in conjunction with the Run Flat Indicator* (Canada vehicles) ( 컄 page 315) or TPMS (U. S. vehicles) ( 컄 page 317). ! The ma[...]

422 Practical hints Battery The battery is located in the engine com- partment on the right-hand side below the water tray ( 컄 page 423). 1 Battery 2 Positive terminal 3 Negative terminal Wa r n i n g ! G Failure to follow these instructions can re- sult in severe injury or death. Observe all safety instructions and precau- tions when handling au[...]

423 Practical hints Battery Disconnecting the battery 1 Water tray 2 Lock 왘 Apply the parking brake ( 컄 page 59). 왘 Make sure the gear selector lever* is set to position P (manual transmission to Neutral). 왘 Turn off all electrical consumers. 왘 Remove the SmartKey from the starter switch. 왘 Open the hood ( 컄 page 294). 왘 Turn locks [...]

424 Practical hints Battery Removing the battery 왘 Remove the screw on the swivel bar. 왘 Remove the swivel bar. 왘 Pull out the battery ventilation hose from the battery (depending on battery arrangement in your vehicle model, the ventilation hose is located either on the left or right side of the battery). 왘 Take out the battery. Charging a[...]

425 Practical hints Battery Reconnecting the battery 왘 Turn off all electrical consumers. 왘 Connect the battery positive lead 2 ( 컄 page 422) a nd fasten its cover. 왘 Connect the battery negative lead 3 ( 컄 page 422). 왘 Reinsert water tray 1 ( 컄 page 423). 왘 Push in locks 2 ( 컄 page 423) and turn one quarter turn. ! Always connect[...]

426 Practical hints Jump starting If the battery is discharged, the engine can be started with jumper cable s and the bat- tery of another vehicle. Observe the follow- ing: 앫 Jump starting should only be performed when the engine and catalytic convert- er are cold. 앫 Do not start the engine if the battery is frozen. Let the battery thaw out fir[...]

427 Practical hints Jump starting 왘 Make sure the two vehicles do not touch. 왘 Turn off all electrical consumers. 왘 Apply the parking brake ( 컄 page 59). 왘 Make sure the gear selector lever* is set to position P (manual transmission to Neutral). 왘 Open the hood ( 컄 page 294). 왘 Flip up cover from positi ve under hood terminal 2 in f[...]

428 Practical hints Towing the vehicle Mercedes-Benz recommends that the vehi- cle be transported with all wheel s off the ground using flatbed or appropriate wheel lift/dolly equipment. When circumstances do not permit the recommended towing methods, the vehi- cle may be towed with all wheels on the ground or front wheels raised only so far as nec[...]

429 Practical hints Towing the vehicle Installing towing eye bolt The towing eye bolt is supplied with the ve- hicle tool kit, located in the compartment underneath the trunk floor ( 컄 page 389). The towing eyes are located on the passen- ger side in the front and rear bumper. 왘 Take vehicle tool kit out of trunk ( 컄 page 389). Front cover 1 [...]

430 Practical hints Towing the vehicle Removing 왘 Press mark on cover 1 . 왘 Cover 1 springs open at the top right corner. 왘 Pull at the protruding part of cov er 1 and fold cover down to reveal the threaded hole for the towing eye bolt. Do not disconnect cover 1 from its check strap. 왘 Screw towing eye bolt in to its end stop and tighten wi[...]

431 Practical hints Towing the vehicle Removing 왘 Press mark on cover 1 . 왘 Cover 1 springs open at the top. 왘 Pull at the protruding part of cover 1 and fold cover down to reveal the threaded hole for the towing eye bolt. Do not disconnect cover 1 from its check strap. 왘 Screw towing eye bolt in to its end stop and tighten with wheel wrenc[...]

432 Practical hints Fuses The electrical fuses in your vehicle serve to switch off malfunctioning power circuits. If a fuse is blown, the components and systems secured by that fuse will stop operating. If a newly inserted fuse blows again, have the cause determined and rectified by an authorized Mercedes-Benz Center. A fuse chart explains the fuse[...]

433 Practical hints Fuses Fuse box in passenger compartment 1 Fuse box cover Opening 왘 Open the driver’s door. 왘 Insert flat, blunt object as a lever into recess on the edge of cover 1 at the position indicated by the arrow. 왘 Loosen cover 1 f rom dashboard using the lever. 왘 Pull cover 1 out and remove. Closing 왘 Attach cover 1 in the [...]

434[...]

435 Technica l data Parts service Warranty coverage Identification labels Layout of poly-V-belt drive Engine Rims and tires Electrical system Main Dimensions Weights Fuels, coolants, lubricants, etc.[...]

436 Technical data The “Technical data” section provides the necessary technical data for your vehicle. Parts service All authorized Mercedes-Benz Centers maintain a stock of Genuine Mercedes-Benz Parts required for mainte- nance and repair work. In addition, strate- gically located parts distribution centers provide quick and reliable parts se[...]

437 Technica l data Warranty coverage 왔 Warranty coverage Your vehicle is covered under the terms of the warranties printed in the Service and Warranty Information booklet. Your authorized Mercedes-Benz Center will exchange or repair any defective parts originally installed in the vehicle in accordance with the terms of the following warranties: [...]

438 Technical data Identification labels 1 Certification label (on driver’s door B-pillar) The V ehicle I dentification N umber (V IN) can be found in the following locations: 앫 on the certification label 앫 on the center tunnel, under a carpet cover behind the passenger seat ( 컄 page 439) 앫 on the lower edge of the win dshield ( 컄 page [...]

439 Technica l data Identification labels 4 VIN 5 Engine number (engraved on engine) 6 VIN (lower edge of windshield) 7 Emission control information label, includes both federal and California certification exhaust emission standards i When ordering parts, please specify vehicle identification and engi ne numbers.[...]

440 Technical data Layout of poly-V-belt drive SLK 280, SLK 350 1 Idler pulley 2 Idler pulley 3 Automatic belt tensioner 4 Power steering pump 5 Air conditioning compressor 6 Cranksh aft 7 Coolant pump 8 Generator (alternator) SLK 55 AMG 1 Automatic belt tensioner 2 Power steering pump 3 Air conditioning compressor 4 Crankshaft 5 Coolant pump 6 Gen[...]

441 Technica l data Engine 왔 Engine Model SLK 280 (171.454) 1 1 The quoted data apply only to the standard vehi cle. Conta ct an authorized Mercedes-Benz Center for the corresp onding data of al l spe cial bodi es and spe cial equipment. SLK 350 (171.456) 1 SLK 55 AMG (171.473) 1 Engine 272 272 113 Mode of operation 4-stroke engine, gasoline inje[...]

442 Technical data Rims and tires ! Only use tires which ha ve been tested and approved by Mercedes-Benz. Tires approved by Mercedes-Benz are developed to provide best possible performance in conj unction with the driving safety syste ms on your vehicle such as ABS or ESP ® . Tires specially developed for your vehicle and tested and approved by Me[...]

443 Technica l data Rims and tires Same size tires Model SLK 280 SLK 280* SLK 280 (Appearance Package*) SLK 350 SLK 350 (Appearance Package*) Rims (light allo y) 7Jx1 6H 2 7.5 J x 17 H2 Wheel offset 1.34 in (34 mm) 1.4 2 in (36 mm) Winter tires 1 , 2 1 Radial-ply tires 2 Not available as factory equipment. 205/55 R16 91H M+S . 225/45 R17 91H M+S . [...]

444 Technical data Rims and tires Model SLK 280 (Sport Package*) SLK 350 (Sport Package*) SLK 55 AMG SLK 55 AMG SLK 55 AMG (Performance Package*) AMG rims (light allo y) 7.5 J x 17 H2 7.5 J x 18 H2 Wheel o ffset 1.46 in (37 mm) 1.46 in (37 mm) Winter tires 1 , 2 , 3 1 Radial-ply t ires 2 Not available as factory equipment. 3 For use with snow chain[...]

445 Technica l data Rims and tires Mixed size tires Model SLK 280 SLK 280* SLK 280 (Appearance Package*) SLK 350 SLK 350 (Appearance Package*) Front axle: Rims (light allo y) 7Jx1 6 H 2 7.5 J x 17 H2 Wheel offset 1.34 in (34 mm) 1.42 in (36 mm) Summer tires 1 205/55 R16 91V 225/45 R17 91W or 225/45 R17 91W MO Extended * 2 Rear axle: Rims (light all[...]

446 Technical data Rims and tires Model SLK 280 (Sport Package*) SLK 350 (Sport Package*) SLK 55 AMG SLK 55 AMG (Performance Package*) Front axle: AMG rims (light alloy) 7.5 J x 17 H2 7.5 J x 18 H2 Wheel o ffset 1.46 in (37 mm) 1.46 in (37 mm) Summer tires 1 , 3 1 Radial-ply t ires 225/45 ZR17 91Y or 225/45 R17 91W MO Extended * 2 2 Must be used in[...]

447 Technica l data Rims and tires Spare wheel Model All models (except SLK 55 AMG with Performance Package*) Rim (light alloy) 4.5 B x 17 H2 Wheel offset 0.47 in (12 mm) Collapsible tire 145/70-17 92P 1 1 Must not be used with snow chains. ! Please compare the recommende d tire inflation pres sure for your vehicle with t he tire inflation pressure[...]

448 Technical data Electrical system Model SLK 280 SLK 350 SLK 55 AMG Generator (alternator) 14 V/150 A 14 V/150 A 14 V/150 A Starter motor 12 V/1.4 kW 12 V/1.4 kW 12 V/1.7 kW Battery 12 V/7 4 Ah 12 V/74 Ah 12 V/74 Ah Spark plugs NGK PLKR 6A Bosch Platin Y 7 MPP33 NGK PLKR 6A NGK IFR6D10 Electrode gap 0.031 in (0.8 mm) 0.031 in (0.8 mm) 0.039 in (1[...]

449 Technica l data Main Dime nsions 왔 Main Dimensions Model SLK 280 SLK 350 SLK 55 AMG Overall veh icle length 161.0 in (4 089 mm) 161.0 in (4 089 mm) 161.1 in ( 4 093 mm) Overall veh icle width (exterior mirrors folded out) 77.5 in (1 969 mm) 77.5 in (1 969 mm) 77.5 in (1 969 mm) Overall veh icle height 51.0 in (1 296 mm) 51.1 in (1 298 mm) 50.[...]

450 Technical data Weights Model SLK 280 SLK 350 SLK 55 AMG Maximum roof load 110 lb (50 kg) 1 1 0l b ( 5 0k g ) Maximum trunk load 220 lb (100 kg) 220 lb (100 kg) ! This vehicle is not designed to carry items on its roof. Roof rails and any roof-mounted de- vices, unless expre ssly approved by Mercedes-Benz for use on this vehicle mo del, must not[...]

451 Technica l data Fuels, coolants, lubricants, etc. 왔 Fuels, coolants, lubricants, etc. Capacities Vehicle components and their respective lubricants must match. Therefore, only use products tested and approved by Mercedes-Benz. Please refer to the Factory Approved Service Products pamphlet (USA only), or inquire at an authorized Mercedes-Benz [...]

452 Technical data Fuels, coolants, lubricants, etc. Model Capacity Fuels, coolants, lubricants etc. Power steering All models 1.1 US qt (1.0 l) MB Power Steering Fluid (Chevron Texaco PSF 9109) Front wheel hubs All models a p p r o x . 2 . 1o z ( 6 0g ) e a c h High temperature roller bearing grease Brake system All models 0.5 US qt (0.5 l) MB Bra[...]

453 Technica l data Fuels, coolants, lubricants, etc. Engine oils Engine oils are specifically tested for their suitability in our engines and durabil- ity for our service intervals. Therefore, only use approved engine oils and oil filters required for vehicles wi th Maintenance System. For a listing of ap- proved engine oils and oil filters, refer[...]

454 Technical data Fuels, coolants, lubricants, etc. Brake fluid Only brake fluid approved by Mercedes-Benz is recommended. Any authorized Mercedes-Benz Center will provide you with additional information. Premium unleaded gasoline Wa r n i n g ! G During vehicle operation, the boi ling point of the brake fluid is continuously reduced through the a[...]

455 Technica l data Fuels, coolants, lubricants, etc. Fuel requirements Only use premium unleaded fuel: 앫 The octane number (posted at the pump) must be 91 min. It is an average of both the Research Octane Number (RON) and the Motor Octane Number (MON): (RON+MON)/2. This is also known as the ANTI-KNOCK INDEX. Unleaded gasoline containing oxygenat[...]

456 Technical data Fuels, coolants, lubricants, etc. Coolants The engine coolant is a mixture of water and anticorrosion/antifreeze, which pro- vides: 앫 Corrosion protection 앫 Freeze protection 앫 Boiling protection (by increasing the boiling point) The cooling system was filled at the factory with a coolant providing freeze protection to appr[...]

457 Technica l data Fuels, coolants, lubricants, etc. Anticorrosion/antifreeze Your vehicle contains a number of aluminum parts. The use of aluminum components in motor vehicle engines necessitates that anticorrosion/antifreeze coolant used in such engines be specifically formulated to protect the aluminum p arts. Failure to use such anti- corrosio[...]

458 Technical data Fuels, coolants, lubricants, etc. Windshield wash er system and headlamp cleaning system* Both the windshield washer system and headlamp cleaning system* are supplied from the windshield washer reservoir. The windshield washer reservoir has a capacity of approximately 7.4 US qt (7.0 l). 왘 Refill the reservoir with MB Windshield[...]

459 Index A ABS 84 Indicator lamp 348, 349 Messages in the multifunction display 362 Accelerator position, automatic transmission 159 Accessory weight 331 Accident 58 Air bags 66 Children in the vehicle 79 Front 69 Head-thorax 70 Knee bag 70 Occupant Classification System (OCS) 7 1 Passenger 69 Passenger front air bag off indicator lamp 74 Safety g[...]

460 Index Gear shifting malfunctions 167 Gearshift pattern 52 Kickdown 159 Kickdown, manual shift program* 167 Manual shift program* 165 Program mode selector switch 161 Shifting procedure 156 Steering wheel gearshift control one-touch gearshifting* 163 B Backup lamp Messages in the multifunction display 383 Replacing bulbs 402 Bar 331 BAS 86 Batte[...]

461 Index Climate control 172 Air conditioning refrigerant 452 Air conditioning, Cooling 180 Air recirculation mode 178 Air vents 172 Air volume 177 Control panel 174 Defrosting 170, 177 Residual heat utilization 181 Switching on/off 175 Temperature 175 Clock 120 Cockpit 24 Cold tire inflation pressure 331 Collapsible tire (spar e wheel) 447 Collap[...]

462 Index Digital speedometer 128 Dimensions, Vehicle 449 Dipstick see Oil di pstick Direction of rotation (Tires) 307 Display text see Messages in the multi- function display Displays Digital speedometer 128 Maintenance service indicator 337 Multifunction display 121 Outside temperature 128 Symbol messages 371 Text messages 362 Vehicle status mess[...]

463 Index Emergency Tensioning Device see ETD Emission control 289 Information label 439 System warranties 10 Engine Cleaning 342 Compartment 294 Malfunction indicator lamp 27, 351 Number 439 Poly-V-belt layout 440 Starting 51 Tachometer 119 Technical data 441 Turning off 61 Engine oil 296, 453 Adding 299 Additives 453 Checking level (Control syste[...]

464 Index G Garage door opener* 270 Gasoline see Fuel GAWR 331 Gear range Automatic transmission 160 Limiting 160 Shifting into optimal 163, 165 Gear selector lever 155 Gearshift pattern 155 Position 156, 157 Shifting procedure 156 Gear selector lever one-touch gearshifting Automatic transmission 162 Global locking/unlocking see SmartKey Glove box [...]

465 Index L Labels 438 Lamp in center console 358 Lamps in instrument cluster 348 Lamps, indicator and war ning ABS 348, 349 Battery (SmartKey) 97 Brakes 350 CHECK ENGINE 351 ESP ® 87, 352 Fuel reserve 355 Instrument cluster 356 Passenger front air bag off 74, 358 Seat belts 353–354 SRS 65, 355 Language in multifunction display (Control system) [...]

466 Index Manual transmission 153 Driving 53 Gearshift pattern 51 Starting with SmartKey 51 Maximum inflation pressure 332 Maximum load rating 332 Maximum loaded vehicle weight 332 Mechanical key see SmartKey Memory function* 107 Menus see Control system menus Messages in the multifunction display see Multifunction display messages Mirror lamp* see[...]

467 Index O Occupant Classification System see OCS Occupant distribution 332 Occupant safety 64 OCS 71 Passenger front air bag off indicator lamp 74 Seat belts 48, 68 SRS 64 OCS 71 Self-test 75 Oil see Engine oil One-touch gearshifting Gear selector lever 162 Steering wheel gearshift control* 163 Operating safety 16, 193 Operating vehicle outside t[...]

468 Index R RACETIMER see Control system menus, AMG Radio Operation (Audio system) 199 Operation (Control system) 133 Satellite* 134 Radio transmitters, control and operat ion 287 Reading lamps 117 Rear view mirrors see Mirrors Rear window defroster 170 Recommended inflation pressure 332 Recovery services for stolen vehicle (Tele Aid*) 269 Refriger[...]

469 Index Selective setting see SmartKey Selector lever see Gear selector lever Selector lever* lock 52 Self-test OCS 75 Service Information 12 Maintenance Booklet 12 Service and warranty Booklet 437 Information 10 Service life (Tires) 305 Service system Maintenance service indicator 337 Parts service 436 Settings menu (Control system) 136 Shelf be[...]

470 Index Storage compartments 32, 253 Armrest 32, 253 Between seat backrests 32, 254 Cup holder 32, 255 Door pockets 32 Glove box 32, 253 Parcel net 32, 254 Storage tray 32 Telephone* 253 Telephone* compartment 32 Trunk 32 Storing tires 306 Summer opening* Power windows 238 Retractable ha rdtop 244 Sun visors 169 Symbols in display 371 T Tachomete[...]

471 Index Tire ply composition and material used 333 Tire speed rating 323, 333 Tire terminology 331 TIREFIT* Instructions for use 408 Vehicle tool kit 389, 390 Tires 304, 442 Cleaning 306 Direction of rotation 307 Driving instructions 283 Flat tire 408 Important guidelines 304 Inflating with air pump 418 Low tire pressure telltale 356 MO Extended [...]

472 Index Useful features Ashtray 255 Cigarette li ghter 256 Cup hold er 255 Floormat (Driver’s side onl y) 258 Garage door opener* 270 Heated steering wheel* 276 Parcel net 254 Power outlet 257 Storage compartments, interior 253 Tele Aid* 262 V Vehicle Battery 302, 422 Bulbs 400 Fuses 43 2 Individual settings (Control system) 136 Jump starting 4[...]

Service and Literature Your authorized Mercedes-Benz C enter has trained technicians and Genuine Mercedes-Benz Parts to service your vehicle properly. For expert advice and quality service, c ontact an authorized Mercedes-Benz Center. If you are interested in obtaining service literature for your vehicle, please contact an au thorized Mercedes-Benz[...]