Midas Consoles U32 Bedienungsanleitung

U 16, U 24 and U 32 Professional Audio Mixing Consoles Operator Manual MUSIC Group Research UK Limited, Klark Industrial Park, Walter Nash Road, Kidderminster. Worcestershire. DY11 7HJ. England. T el: +44 1562 741515 Fax: +44 1562 745371 Email: mkt.info@music-group.com Website: www .midasconsoles.com Venice U — Operator Manual DOC02-VENICEU Issue[...]

[...]

Venice U Operator Manual iii MUSIC Group IP Limited Important safety instructions Terminals marked with this symbol carry ele ctrical current of sufficient magn itude to constitute risk of electric sho ck. Use only high-quality comme rcially-availabl e speaker cables with ¼" TS plugs pre-installed. All ot her installation or modi fication sho[...]

iv Venice U MUSIC Group IP Limi ted carefully . Registering your purchase and equipment with us hel ps us process you r repair claims quicker an d more efficiently . Thank you for your coop eration! § 3 Return materials authorization 1. To obtain wa rranty service, pleas e contact the retailer from whom the equipment was purchased. Should you r MU[...]

Operator M anual v Other important information 1 Register online. Please register your new Mid as equipment right after you purchase i t by visiting www.midasconsoles.com. Registering yo ur purchase using our simpl e online form helps us to proces s your repair claims more quickly and e fficiently . Also, read the terms and condi tions of our warra[...]

vi Venic e U MUSIC Group IP Limi ted[...]

vii VeniceU Operator Manual Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Other important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview of the Venice U .[...]

viii Contents VeniceU Operator Manual EQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Auxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Pan, mut[...]

Contents ix VeniceU Operator Manual The effect of EQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Dynamic processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Unity Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Signal Processing and [...]

x Contents VeniceU Operator Manual[...]

1 VeniceU Operator Manual Chapter 1: Introduction Thank you for choosing a Midas Venice U mixing console. The Venice U range of consoles have been developed to meet the needs of demanding live sound engineers and provide the solution for any audio mixing application in live sound or studio environments. The Venice U meets the quality of build and p[...]

2 Chapter 1: Introduction VeniceU Operator Manual a flexible bus structure that lets the engineer configure the console for different applications. The VeniceU consoles (U16 left, U24 top and U32 bottom) All variants include four multifunction input channels for use on variou s sources. These share single control knobs and have slightly different f[...]

Key features 3 VeniceU Operator Manual The USB interface can be used with any pers onal computer (PC) fitted with a standard USB 2.0 port, and is effectively a digital multi-channel cable (up to 8 in and 8 out channels) for connecting the PC to the console. U SB lets you use any third party audio processing software in conjunction with the console,[...]

4 Chapter 1: Introduction VeniceU Operator Manual • Mains power supply — universal switch mode power supply unit (PSU) with mains input socket and on/off switch. • Lamps — socket(s) for fitting lamps. • Playback/record I/Os — input/output sockets for playback and recording. • Warranty — standard Midas 3-y ear warr anty . Control sur[...]

Control surface 5 VeniceU Operator Manual Item Description 1 See Chapter 5 "Mono Input Channel" on page 37 2 See Chapter 6 "Multifunction Input Channel" on page 47 3 See Chapter 7 "Output Section" on page 57[...]

6 Chapter 1: Introduction VeniceU Operator Manual Rear panel The Venice U has a rear panel that houses the following. Rear panels of the VeniceU consoles showing the main areas Item Descri ption 1 See “Master outputs (mono and stereo)” on page 69. 2 See “Stereo returns” on pa ge 66, “G roups” on page 61, “Matrices” on page 64, “Mo[...]

External connections 7 VeniceU Operator Manual Rear panel of the VeniceU16 showing the main connector sections A. Inserts and returns. B. Mono input channel (insert, dire ct out, line in and mic in). C. Multifunction input channel (insert, direct ou t, line in left (mono) and right, and mic in). D. Playback I/Os (left and right). E. Local monitor o[...]

8 Chapter 1: Introduction VeniceU Operator Manual Signal flow The following table giv es an overview of the basic si g nal fl ow. All channel types can also access the PFL, and AFL (left and right) solo buses. All primary outputs Balanced XLR connectors, 50R source Master channels Aux, group, matrix, monitor and local (monitor) buses All secondary [...]

Signal flow 9 VeniceU Operator Manual The following table shows the signal flow in detail. Signal Sourced from Routed to Mono Balanced XLR mic/line input or balanced Jack line input (common gain control with above) or insert return Buses, insert Jack, direct output Jack Stereo Balanced XLR mic/line input and balanced Jack line input (independent ga[...]

10 Chapter 1: Introduction VeniceU Operator Manual Mix matrix Ultimately, the mix matrix defines the capability of each Venice U . It follows the console layout, where inputs run vertically and buses run horizontally. A mix matrix is usually defined as the number of buses and the qu antity of simultaneously-mixable inputs there are per bus. VeniceU[...]

Service and support 11 VeniceU Operator Manual • There are diagrams throughout the manual that show you wh ere on the console the local information is referring to. These areas are indicated by blue shading. F or example, the mono input channels, as shown right. • Unless otherwise stated, an illuminated LED means that its related control/functi[...]

12 Chapter 1: Introduction VeniceU Operator Manual[...]

13 VeniceU Operator Manual Chapter 2: Getting Started This chapter shows you how to prepare the Venice U for operation, whic h includes: • Installation • Conne cting up • Setting up •P o w e r i n g u p Before installing, setting up or operating this equipment make sure you have read and fully understand all of the “IMPORTANT SAFETY INSTR[...]

14 Chapter 2: Getting Start ed VeniceU Operator Manual Electric fields Should this product be use d in an electrom agnetic field that is amplitude modulated by an audio frequency signal (2 0Hz to 20kHz), th e signal to noise ratio may be degraded. Degradation of up to 60dB at a frequency corresponding to the modulation signal may be experienced und[...]

Connecting up 15 VeniceU Operator Manual Connecting to balanced/unbalanced equipment The inserts of the Venice U are unbalanced. Ideally, you will be connecting the inserts to balanced equipment to help avoid noise problems due to grounding. Figure 1: Conn ecting to balanced equi pment However, if you do have to connect to un balanced devices, the [...]

16 Chapter 2: Getting Start ed VeniceU Operator Manual Other connections The section gives details of the other Venice U in t e r c o n nections . Setting up There is no initial setting up required for the Venice U console. However, if you want to use USB, you will need to set up your PC first (see Chapter 3 "Using The VeniceU With USB" o[...]

Switching t he VeniceU o n/off 17 VeniceU Operator Manual Switching the Venice U on/off Switch the Venice U on/off via the mains switch on the rear panel. Mains power supply input on the rear panel. A. Mains on/off switch. B. Mains power supply socket (IEC connector). A B[...]

18 Chapter 2: Getting Start ed VeniceU Operator Manual[...]

19 VeniceU Operator Manual Chapter 3: Using The VeniceU With USB This chapter shows you how to prepare your PC/Mac® for USB operation. The Venice U console has been tested and verified for US B use with the following computer operating systems: a PC running Windows® 7 and a Mac running OS® X (version 10.7 or later). However, we cannot guarantee [...]

20 Chapter 3: Using The VeniceU With USB VeniceU Operator Manual 3 In the User Account Control dialog box, click Yes. 4 In the “W elcome ... ” screen of the Setup dialog box, click Next. 5 In the “Choose Install Location” screen of the Setup dialog bo x, choose the destination of the USB driver and click Install. The installation will begin[...]

Windows 7 operat ing system 21 VeniceU Operator Manual 7 The installation procedure should continue. After the installation has been completed successfully , click Next. 8 In the “Completi ng ... ” screen of the Setup dialog box, click Finish. 9 The Archwav e icon should appear in the task bar at the lower-right corner of the screen. Using the [...]

22 Chapter 3: Using The VeniceU With USB VeniceU Operator Manual Archwave USB Driver Control Panel window >> To open the Archwave US B Driver Control Panel window On your PC desktop, double-click the Archwave USB Driver Control Panel icon. Item Element 1 File menu. Contains the Close and Quit commands. Selecting Close hides the application in[...]

Windows 7 operat ing system 23 VeniceU Operator Manual Devices option The Devices option lets you manage your audio system USB devices. Item Element 1 List of connected devices, showing the device name and serial number of each. 2 Up and Down buttons. These buttons change the position of a device in the list of connected devices by mov ing it up/do[...]

24 Chapter 3: Using The VeniceU With USB VeniceU Operator Manual Input Channels option The Input Channels option lists all of the input channels (also known as active input channels) in your audio system. Item Element 1 List of input channels. 2 Include device name in ASIO display name check box. Wh en this check box is selected, device names are i[...]

Windows 7 operat ing system 25 VeniceU Operator Manual Output Channels option The Output Channels option lists all of the output channels (also kn own as active output channels) in your audio system. Item Element 1 List of output channels. 2 Include device name in ASIO display name check box. When this check box is selected, device names are includ[...]

26 Chapter 3: Using The VeniceU With USB VeniceU Operator Manual Synchronisation option The Synchronisation option lets you choose the sample rate frequency and clock source. Item Element 1 Sampling Rate Selection Mode frame, lets you set the sampling rate automatically or manually . Click the Automatic Mode option button to let the system set the [...]

Windows 7 operat ing system 27 VeniceU Operator Manual Settings option The Settings option lets you select the bu ffer sizes that your PC will use for y our recording software. Select buffer size according to your eq uipment, remembering that if it is too small you will suffer audio clicks and pops, and if it is too large there will be audible dela[...]

28 Chapter 3: Using The VeniceU With USB VeniceU Operator Manual Streams option The Streams option shows the audio and sync I/O connections for each connected device.[...]

Mac operating system 29 VeniceU Operator Manual Mac operating system USB, when used with a Mac r unning OS® X (v ersion 10.7 or later), is a ‘plug and play’ d evice. So, unlike on a PC running Windows® 7, there is no need to install a USB device driver. Note: The settings available for configuration may be dependent on a number of variables, [...]

30 Chapter 3: Using The VeniceU With USB VeniceU Operator Manual[...]

Updating the VeniceU firmware 31 VeniceU Operator Manual Updating the Venice U firmware The latest version of the USB firmware for the Venice U will be available on the Midas website (address is on the front cover of this manu al ). >> To update the Venice U with the latest firmware The following procedure is based on a PC running Window s® [...]

32 Chapter 3: Using The VeniceU With USB VeniceU Operator Manual 5 In the deviceUpgrade_64 dialog box, click Yes. The installation will begin. 6 If the upgrade w as successful, you should see the following Midas Firmware Upgrade dialog box. C lick OK. Troubleshooting USB operation This section may help you overcome any prob lems that may arise when[...]

Troubleshooting USB operation 33 VeniceU Operator Manual No devices found If no devices appear in the driver control panel, it means that the PC/Mac cannot detect a device. Do one of the following: • Connect the V e nice U to your PC/Mac. •I f t h e V e n i c e U is already connected to your PC/Mac, check that the connections are good. Overcomi[...]

34 Chapter 3: Using The VeniceU With USB VeniceU Operator Manual[...]

35 VeniceU Operator Manual Chapter 4: Working With The Console The following chapters give a description of the controls on the console surface and include useful operating information. • Chapter 5 " Mono Input Channel" on page 37 • Chapter 6 " Multifunction Input Channel" on page 47 • Chapter 7 "Output Section" [...]

36 Chapter 4: Working With The Console VeniceU Operator Manual[...]

37 VeniceU Operator Manual Chapter 5: Mono Input Channel This chapter details the mono inpu t channels (8/16/24) of the Ve nice U . It describes the sections of each channel on the control surf ace and the related connectors on the rear panel. Mono input channels on the control surface (U32 shown) Although the actual number of mono input ch annels [...]

38 Chapter 5: Mono Input Channel VeniceU Operator Manual Overview of the mono input channel Each mono channel has an X LR input that can be used for mic or line level signals up to +32dBu. An additional 1/4” inch TRS Jack socket, provides an input for line level signals that require protection against accidental 48-volt connection. The line input[...]

Rear panel 39 VeniceU Operator Manual Rear panel The Venice U channel inputs are located on the rear panel of the console and each channel comprises the following. Mono input channel connectors The direct out and insert points operate at a nominal level of 0dBu. Balanced XLR and Jack inputs are conventionally wired (see Table 1 “Connector pinouts[...]

40 Chapter 5: Mono Input Channel VeniceU Operator Manual Gain This section lets you adjust the level of th e mic input signal, switch on 48 volts phantom power for the mic, attenuate the input sign al by 20dB, inve rt the mic polarity and enable the high pass filter on the mic input. Mic gain section of the mono input channels Item Descri ption 1 2[...]

EQ 41 VeniceU Operator Manual EQ Each mono input channel of the Venice U has a four-band, swept EQ, allowing tonal control over the input signal. EQ section of the mono input channels Item Description 1 Treble gain/freq control knob This dual-concentric control knob adjusts the gain/frequency of the treble EQ: • gain The top control knob adjusts [...]

42 Chapter 5: Mono Input Channel VeniceU Operator Manual Monitors The two monitor sends per input channel have the same functionality as the auxes (see “Auxes” on page 43). However, they have the following additional features: • They can be sourced pre-EQ. • They can be metered individually (see “Monitors” on page 67). • They can rece[...]

Auxes 43 VeniceU Operator Manual Auxes The Venice U has four aux sends per input channel, w hich can be used for effects sends, monitors or as extra assignable outputs from t he console. Each aux has a control knob that gives continuous adjustment of the le vel sent from the input channel to the aux buses, in the range 4 (infinity/off) to +6dB. Aux[...]

44 Chapter 5: Mono Input Channel VeniceU Operator Manual Pan, mute and solo The Venice U has pan, mute and solo per mono input channel. Pan, mute and solo sections of the mono in put channels Item Descri ption 1 pan control knob The pan control allows the channel signal to be positioned in a stereo field when routed to the stereo bus, or when group[...]

Fader, routing and meter 45 VeniceU Operator Manual Fader, routing and meter The Venice U is a flexible mixing console with four group buses, plus stereo and mono, with a 100 mm fader and a four-LED signal meter per mono input channel. Fader section of the mono input channels Item Description 1 LED meter These four LEDs comprise the input channel m[...]

46 Chapter 5: Mono Input Channel VeniceU Operator Manual Meter The meter is especially useful when setting th e microphone gain of a channel. Also, as the meter is post-EQ, it is possible to see the effect that the channel equalisation has upon the level. It may be necessary to turn the in put gain do wn when excessive EQ is used to prevent the cha[...]

47 VeniceU Operator Manual Chapter 6: Multifunction Input Channel This chapter details the multifunction input channels of the Venice U . It describes the sections of each multifunction channel on the control surface and the related connectors on the rear panel. Multifunction input channels on the control surface All types of Venice U have four mul[...]

48 Chapter 6: Multif unction Input Ch annel VeniceU Operator Manual Overview of the multif unction input channel The Venice U multifunction channel (shown right) is equipped with an XLR input, which are used for mic/lin e level signals up to +32dBu. Two 1/4” TRS Jack sockets provide inputs for line level signals that require protection against ac[...]

Rear panel 49 VeniceU Operator Manual Rear panel The Venice U channel inputs are located on the rear panel of the console. Multifunction input channel connectors Note: The insert and direct out are sourced from the mic input only. Item Description 1 insert Insert point on a single 1/4” TRS Jack socket. This is unbalanced and requires a convention[...]

50 Chapter 6: Multif unction Input Ch annel VeniceU Operator Manual Gain (mic inputs) This section has the same functionality as the gain section of the mono input channels except for the following. For full details, see “Gain” on page 40. • 20dB pad switch On multifunction input channels the pad switch has no effect upon the left and right l[...]

Stereo line inputs 51 VeniceU Operator Manual Stereo line inputs The stereo line gain control knob adjusts level of the stereo line input signal, which is continuously variable from 4 (infinity/off) to +20dB with a centre detent at 0dB, thus allowing low level line signals to be trimmed to obtain the optimal signal level. Stereo line gain control o[...]

52 Chapter 6: Multif unction Input Ch annel VeniceU Operator Manual Monitors The monitor sends of the multifunction input chan nels have similar functionality to those of the mono input channels. For more information, see “Monitors” on page 42. Note: Stereo left and right channel signals are summed into a mono signal to be routed to the monitor[...]

Balance, mute and solo 53 VeniceU Operator Manual Balance, mute and solo The Venice U has balance, mute and solo on every multifunction input channel. Balance, mute and solo sections of the multifunction input channels Item Description 1 bal control knob This stereo line input balance control allows continuous reciprocal adjustment of the channel?[...]

54 Chapter 6: Multif unction Input Ch annel VeniceU Operator Manual Fader, routing and meter The Venice U fader section has the following functions. Fader section of the multifunction input channels Item Descri ption 1 LED meter These LEDs comprise the multifunction input channel me ter, which lets you monitor the input signal without having to use[...]

Fader, routing and meter 55 VeniceU Operator Manual Meter The meter is especially useful when setting th e microphone gain of a channel. Also, as the meter is post-EQ, it is possible to see the effect that the channel equalisation has upon the level. It may be necessary to turn the input gain down wh en excessive EQ is used to prevent the channel f[...]

56 Chapter 6: Multif unction Input Ch annel VeniceU Operator Manual[...]

57 VeniceU Operator Manual Chapter 7: Output Section This chapter deals with the output section of the Venice U . It describes the control surface and the related connectors on the rear panel. Output section of the control surface The output section comprises the following main areas: • Group (see “Groups” on page 61) • Matrix (see “Matri[...]

58 Chapter 7: Output Sect ion VeniceU Operator Manual Rear panel The main outputs of the Venice U are located on the rear of the console. Output connections on rear panel[...]

Overview of the outputs section 59 VeniceU Operator Manual Overview of the outputs section The outputs section comprises the following main areas. Item Description 1 See “Matrices” on page 64. 2 See “Master outputs (mono and stereo)” on page 69. 3 See “Talkback” on page 71. 4 See “Playback and recording ” on page 72. 5 See “Local [...]

60 Chapter 7: Output Sect ion VeniceU Operator Manual Output module notes Before looking at the function of the o utput section of the console, it is essential that you are comfortable with a few of the console’s features that af fect groups, matrices and auxes. Rather than discuss these featur es in each section (although they will be repeated t[...]

Groups 61 VeniceU Operator Manual Groups Each of the four group buses has an output and an insert. Group connectors on rear panel USB output is available for the groups by th e overriding multifun cti on input channels. For more information, see “USB” on page 62. Each group output has fader level adjustment and metering. Group output sections o[...]

62 Chapter 7: Output Sect ion VeniceU Operator Manual USB The usb section on the rear panel of the console lets you connect a PC. USB section on the rear panel On the control surface, a usb in switch in the multifunction input channels lets you activate USB on those channels. Item Descri ption 1 Meter LEDs These LEDs comprise the group meter, which[...]

USB 63 VeniceU Operator Manual USB sections on the control surface Item Description 1 usb in switch This latching switch inserts the USB return to the channel, muting the mic and line inpu ts. 2 usb c/o This latching switch flips th e aux USB output to group output. 3 override ma st ers to usb with matr ix sw it ch This latching switch overrides th[...]

64 Chapter 7: Output Sect ion VeniceU Operator Manual Matrices There is an output connector and insert connector on the rear panel for both matrix outputs. Two matrix inserts and two matrix outputs on the rear panel USB output is available for the matrix output s by overriding the relevant multifunction input channel 29-30. For more information, se[...]

Matrices 65 VeniceU Operator Manual Item Description 1 group 1 to group 4 control knobs Each of the groups (1-4) has its own individual matrix send level, which is continuously variable from 4 (infinity/off) to +6dB. Unity (0dB) is also marked on the scale, allowing the signal to be routed to the matrix without any attenuation or gain. Alternativel[...]

66 Chapter 7: Output Sect ion VeniceU Operator Manual Stereo returns There are two stereo returns that route to masters, certain groups and the two monitor buses. Stereo returns 1 and 2 on the rear panel. Each return has left and right TRS 1/4” TRS Jack sockets. stereo returns section on the control surface Item Descri ption 1 return 1 and return[...]

Monitors 67 VeniceU Operator Manual Monitors There is an output connector and insert connector on the rear panel for both monitor bus outputs. Two monitor inserts and two monitor outputs on rear panel Monitor channels (1 and 2) Item Description 1 pre switch This is the bus master pre-fader switch. 2 monitor control knob This output level control gi[...]

68 Chapter 7: Output Sect ion VeniceU Operator Manual Auxes There are four independent aux outputs on the rear panel. Four aux XLR outputs on the rear panel Each aux output is controlled by a discrete section on the control surface. Auxes on the control surface Pre-fade aux 1-4 sends are sourced after the channel insert, mute and EQ, but be fore th[...]

Master outputs (mono and stereo) 69 VeniceU Operator Manual Table 2: Typical uses of auxiliaries Master outputs (mono and stereo) There is an output connector and insert connector on the rear panel for each of th e mono, left and right master channels. Master outputs on the rear panel USB output is available for the left and right master channels b[...]

70 Chapter 7: Output Sect ion VeniceU Operator Manual Master outputs sections on the control surface Item Descri ption 1 stereo to mono switch When this switch is on, a sum of the stereo left and right signals are routed to the mono signal bus (post-mute and post-fader, and post-insert points). 2 bal control knob Provides f ine adjustment of the le[...]

Talkback 71 VeniceU Operator Manual Talkback The Venice U provides a talkback mic that can be routed to a nu mbe r of the console’s outputs. Talk mic section on the control surface Item Description 1 on switch and green LED When on (button fully in), the talk mic input is enabled and routed to the talk bus, in which case both local monitor output[...]

72 Chapter 7: Output Sect ion VeniceU Operator Manual Playback and recording The following four connectors on the rear panel provide discrete analogue inputs and outputs for audio playback an d reco rding, respectively. Playback/record sockets on the rear panel Playback The two in ( right and left ) connectors let you connect an analogue device, su[...]

Local monitor and phones 73 VeniceU Operator Manual Local monitor and phones There are two local monitor outputs on the rear panel for providing a signal fo r monitor speakers. Local monitor outputs on the rear panel A local monitor section on the control surface lets you connect headphones for local monitoring and adjust their signal level, an d a[...]

74 Chapter 7: Output Sect ion VeniceU Operator Manual Lamps There are sockets towards the top of the co nsole’s rear panel for connecting 12V desk lamps. They accept 4-pin female XLR connectors. The power rating of 5W is the maximum rating per output and must not b e exceeded. Position of the lamp sockets on the VeniceUs[...]

75 VeniceU Operator Manual Appendix A: Functional Block Diagrams This chapter contains the Venice U signal path diagrams.[...]

76 Appendix A: Functional Block Diagrams VeniceU Operator Manual Mono input module[...]

Mono input module 77 VeniceU Operator Manual[...]

78 Appendix A: Functional Block Diagrams VeniceU Operator Manual Stereo input module[...]

Stereo input module 79 VeniceU Operator Manual[...]

80 Appendix A: Functional Block Diagrams VeniceU Operator Manual Master and monitor modules[...]

Master and monitor modules 81 VeniceU Operator Manual[...]

82 Appendix A: Functional Block Diagrams VeniceU Operator Manual[...]

83 VeniceU Operator Manual Appendix B: Technical Specification This appendix provides the full te chnical specification for the Venice U series of mixing consoles. Due to a policy of continual improvement, Mida s reserves the right to alter the function or specification at any time without notice. Table 3: Venice U technical specifications Item Det[...]

84 Appendix B: Technical Spec ification VeniceU Operator Manual Table 4: Venice U performance sp ecifications Input impe dance Mic Line 2k balance d 10k balan ced Input gain Mic Line mono channel Line stereo channel Line level inputs Continuously variable from 10dB to 60d B Continuously variable from 0dB to 50dB Continuously variable from minus inf[...]

Dimensions 85 VeniceU Operator Manual Dimensions This section gives details of the external dimensions of the Venice U series consoles. Table 5: Venice U technical specifications In the following diagrams dimensions are in millimetres, with the equivalent in inches enclosed in brackets. Nominal signal level Mic Line -60dBu to +10dBu 0dBu Equaliser [...]

86 Appendix B: Technical Spec ification VeniceU Operator Manual External dimensions of the U16, U24 and U32 co nsoles. Dimensions are in millimetres (inches). Venice U 16 = 552 (21.7”) Venice U 24 = 760 (29.9”) Venice U 32 = 960 (37.8”) 528 (20.8”) 263 (10.4”) 89 (3.5”) 20° 246 (9.7”) 578 (22.7”)[...]

87 VeniceU Operator Manual Appendix C: Application Notes This appendix provides application notes as a guide to help you with Venice U console operation. With its flexible routing and functionality, the Venice U was designed with real-world sound engineers in mind, working in the real world. So, for engineers that haven’t got a great deal of expe[...]

88 Appendix C: Application Note s VeniceU Operator Manual channels will receive the same signal at the same time so, typically, when 16 channels are summed together a gain of around 5dB to 8dB will be seen. It is important to leave some headroom in the summing amplifiers so that they do not overload, should the sum exceed the maximum level. The eff[...]

Unity Gain 89 VeniceU Operator Manual Unity Gain Unity gain is a gain of 1, that is, no gain or attenuation is applied to a signal. If a signal entered a mono line level input of the Venice U at 0dBu and the gain was set to +10dB (an internal 10dB attenuation sets the net gain to 0dB), then the signal was routed to each output at 0dB, the channel f[...]

90 Appendix C: Application Note s VeniceU Operator Manual There are a number of solutions to this problem: • Reduce the amplifier’s input attenuat or s to a level where the amplifier and console clip at the same point. F or example, the input sensitivity is 0dBu, setting the input attenuator on the amplifier to -21dB would mean that the console[...]

Routing 91 VeniceU Operator Manual The submix is now set up. The group level can be used to control the overall level of the channels (retaining their relative leve ls), mute the submix output or solo the submix signal. Note: Muting the subm ix is not the same as muting the channels. Aux sends and other group sends will remain active. • Common EQ[...]

92 Appendix C: Application Note s VeniceU Operator Manual[...]

93 VeniceU Operator Manual Appendix D: Crib Sheets This appendix provides you wi th a template each for the mono and multifunction input channels. These will help you keep a record of your most important settings and make notes. If necessary, you can make copies of these pages if you n eed more records.[...]

94 Appendix D: Crib Sh eets VeniceU Operator Manual Mono input channels Notes:[...]

Multifunction input channels 95 VeniceU Operator Manual Multifunction input channels Notes:[...]

96 Appendix D: Crib Sh eets VeniceU Operator Manual[...]

97 VeniceU Operator Manual Appendix E: Best Grounding Practice This appendix gives details of the best grounding practices for the Venice U console in order to get the optimum performance out of it. Safety first The Venice U is classified as a class 1 device and as such there is a safety requirement for the powe r cable to provide an earth connecti[...]

98 Appendix E: Best Grounding Practice VeniceU Operator Manual Ground loop Noise sources Audio manufacturers have known about these issues for many years and most equipment is designed to reduce ground l oop generation to the bare minimum or to minimise the effects. But, as switch mo de power supplies and computers become more common place, th e ea[...]

Noise sources 99 VeniceU Operator Manual Isolated USB computer system. Note how th e isolation barrier breaks the ground loop. Non-isolated USB computer system. With no isolation barrier, the ground loop is present. Midas Venice U console Power distributio n unit (PDU) Power supply unit (PSU) with internal isolation barrier USB connection Broken gr[...]

100 Appendix E: Best Grounding Practice VeniceU Operator Manual Noise solutions The grounding on the Venice U is very robust and often such ground loop induced noises are negligible, but to get the very best out of your console, and especially out of any less robust equipment within the overall syst em, some consideration should be given to good gr[...]

Balanced connections 101 VeniceU Operator Manual Loop area diagram showing a small loop area Balanced connections Balanced connections are generally immune to ground loops because the grounded screen conductor is not used as a reference for the signal condu ctors. Instead, each conductor of a balanced connection is a reference for the other, and an[...]

102 Appendix E: Best Grounding Practice VeniceU Operator Manual Balanced transformers Active electronic circuits achieve good results, but for ultimate noise rejection, transformers are needed. Transformers colo ur the sound especially at low and high frequencies due to core saturation and impeda nce rises. They are also expensive, so they are typi[...]

Ground referenced connections 103 VeniceU Operator Manual Screen termination diagram showing screen broken at source Ground referenced connections Many unbalanced signals are passed between pieces of equi pment where one of the devices is balanced and the other is not. By careful wiring using two-core cable with an overall screen, it is possible to[...]

104 Appendix E: Best Grounding Practice VeniceU Operator Manual connecting balanced external processing equipment to the insert points, the connection method described in this section should be ad opted so as to benefit from the CMR of the external unit. For an example of how to wire a grou nd referenced insert, se e Figure 2 on page 15. Unbalanced[...]

XLR shells 105 VeniceU Operator Manual XLR shells XLR pin 1s should only be used to provide a ground connection for cable screens. The shell (body) of cable XLRs also need to be connected to ground so they provide a screen for the terminals, but they should not be wi red internally to the pin 1 terminal. Their ground should be prevented from contac[...]

106 Appendix E: Best Grounding Practice VeniceU Operator Manual Diagram showing the bond connection between console and 19” rack Midas Venice U console Power distribution unit (PDU) Power connectio n Power supply unit (PSU) without internal isolation barrier Laptop PC/Mac Power connection USB connection Power connection 19” rack Audio connectio[...]

107 VeniceU Operator Manual Appendix F: Modification For VeniceU16 Rack Mounting Use only screws that were loosened duri ng mod ification or such ones that are contained in the mount ing set. The module is a static-sensitive device . Proper grounding and electrostatic discharge (ESD) precautions are requ ired before handling t he module. This appen[...]

108 Appendix F: Modification For VeniceU16 Rack Mounting VeniceU Operator Manual Modification procedure 1 Electrically isolate the U 16 console by comp l e tely di s co n n ecti n g it from the mains. Remo ve all cables from the console, such as mains, audio, lamp, etc. 2 Remo ve both side cheeks. Remove one side cheek by removing the five 5 mm scr[...]

Modification procedure 109 VeniceU Operator Manual 4 At this point the blanking br acket (high lighted in red) is now loose and can be removed. T urn the unit o n its side and place it carefully on a smooth support. Re move the blanking brack et. 5 At the rear of the console, remov e the four M3 x 6 mm pan head screws securing the rear panel assemb[...]

110 Appendix F: Modification For VeniceU16 Rack Mounting VeniceU Operator Manual 6 The rear panel assembly (highlighted in green) should now be loose. R otate the rear panel assembly so that the connector panel ends up on the underside of the console. Take great care not to put undue stress on the cabling. Swivel the rear panel assembly approximate[...]

Modification procedure 111 VeniceU Operator Manual 7 With the console still resting on its side, secure one end of the rear panel assembly to the side panel, using five (of the seven) screws that you remov ed in step 3. 8 Secure the rear panel assembly using the four screws you removed in step 5.[...]

112 Appendix F: Modification For VeniceU16 Rack Mounting VeniceU Operator Manual 9 Fit the blanking brack et that you removed in step 4 (highlighted in green below) to the rear of the console. 10 Secure one end of the blanking bracke t to the side panel using the remaining two (of the seven) screws that y ou removed in Step 3. 11 T urn the console [...]

Modification procedure 113 VeniceU Operator Manual 12 T urn the console onto its base and remo ve the arm rest by removing the four securing screws at the front. 13 Fit the rack moun ting brackets to both sides of the console. Secure a bracket (highlighted in green below) to one side of the console using four M4 x 10 mm countersunk screws (use a T2[...]

114 Appendix F: Modification For VeniceU16 Rack Mounting VeniceU Operator Manual[...]

115 VeniceU Operator Manual Appendix G: Service Information This appendix give details of how to look after your Venice U . Routine maintenance To help keep your Venice U unit in good working order and to make sure it gives you optimum performance, we recommend that you carry out the following about once every month. • Clean the console, as detai[...]

116 Appendix G: Service Information VeniceU Operator Manual Equipment disposal When this equipment has come to the end of it useful life, its disposal may come under the DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAM ENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE). Hazardous substances in WEEE contaminate[...]

Operator M anual 11 7 MUSIC Group IP Limited FEDERAL COMMUNICA TIONS COMMISSION COMPLIANCE INFORMA TION Ve n i c e U 16/V enice U 24/V enice U 32 complies with the FCC ru les as mentioned in th e following paragraph: This equipment has been tested and found to comply with the lim its for a Class A digital device, pursuant to Part 15 of the FCC Rule[...]

1 18 Venice U MUSIC Group IP Limi ted[...]

Thank you for reading through this Operator Manual. We hope you found it useful. Please fe el free to send us y our comme nts. Our contact details and website address c an be found at the front of th is do cument.[...]

Klark Industrial P ark, Walter Nash R oad, Kidderminster . Worcester shi re. DY11 7HJ. England. T el: +44 1562 7415 15, F ax: +44 1562 745371 Email: mkt.info @music-group .com W ebsite: www . midasconsoles.c om © 2013 MUSIC Group IP Limited[...]