Miele K 12421 SD Bedienungsanleitung

Operating and installation instructions Refrigerator with Dynamic cooling K 12421 SD To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 290 820 e n-G B[...]

Guide to the appliance .............................................4 Caring for the environment ..........................................6 Warning and Safety instructions .....................................7 How to save energy ...............................................1 2 Switching on and off ..............................................1[...]

Cleaning and care ................................................2 4 Cleaning the interior and accessories ..................................2 4 Appliance door, side panels .........................................2 5 Ventilation gaps ...................................................2 6 Door seal .................................................[...]

a On/Off button b Super cool button c Display If the appliance is not operated for some time, the display will revert automatically to the brightness level which has been set. As soon as a button is pressed the display will light up at the brightest setting. d Menu symbol (Setting mode for the brightness level of the display) e Super cool symbol f [...]

a Control panel b Dynamic cooling fan c Butter and cheese compartment d Egg tray e Adjustable shelves f Bottle rack g Bottle shelf h Condensate channel and drain hole i Fruit and vegetable containers Guide to the appliance 5[...]

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Disposal of your old applia[...]

This appliance complies with all relevant safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain important notes on install[...]

Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. It could be dangerous. ~ If the connection cable is faulty it must only be replaced by a service technician authorised by the manufacturer to protect the user from danger. ~ This appliance contains the coolant [...]

~ The electrical safety of this appliance can only be guaranteed if correctly earthed. It is most important that this basic safety requirement is observed and regularly tested and where there is any doubt, the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for damage or injury caused b[...]

Correct use ~ Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Thermostats switching on may produce sparks which could present a fire hazard. Flammable compounds could explode. ~ Do not operate any electrical equipment (e.g. an electric ice-cream maker) inside the appliance. Danger of spark[...]

Disposal of your old appliance ~ Before disposing of an old appliance, first make the door latch or lock unusable. This way you will prevent children from accidentally locking themselves in and endangering their lives. ~ Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by – puncturing the refrigerant channels in th[...]

Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not near to a heat source (radiator, oven). Near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where there is a high amb[...]

Before using for the first time Protective foil The stainless steel trim in the interior has a layer of protective foil to prevent damage during transportation. On stainless steel appliances, there will also be protective foil on the stainless steel door and on some appliances on the side panels as well. ^ Do not remove the foil until the appliance[...]

Settings mode X You can alter the brightness of the display s in Settings mode. Settings mode is represented in the display by the Menu symbol X . The following section describes how to access Settings mode and alter settings. Altering the brightness of the display The display brightness can be adjusted to suit the lighting conditions of the room. [...]

It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. The temperature in the appliance will rise:[...]

To set the temperature between 5 and 7 °C to be slightly colder: ^ Press the temperature selector button repeatedly until the indicator for 5 °C lights up. ^ Press the button for approx. another 5 seconds to set the temperature. The colder temperature setting within the small temperature range is now set. However, this is not visible in the tempe[...]

Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for the faster chilling of large amounts of fresh food or drink. ^ Press the Super cool button. The Super cool symbol ª will l[...]

Switching on Dynamic cooling ^ Press the Dynamic cooling button. The Dynamic cooling symbol ¢ will light up. The Dynamic cooling fan is now ready to operate. It will switch on automatically when the compressor switches on. Switching off Dynamic cooling ^ Press the Dynamic cooling button. The Dynamic cooling symbol will go out. To save energy, the [...]

Different storage zones Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance. This appliance has dynamic cooling, which helps to keep an even temperature w[...]

Food which is not suitable for storing in the refrigerator Not all food is suitable for storing in a refrigerator at temperatures below 5 °C, as some food does not tolerate cold temperatures. Cucumbers, for example, become glassy, aubergines bitter and potatoes sweet. Tomatoes and oranges loose their aroma, and the peel on citrus fruits hardens. F[...]

Examples of fruit and vegetables which react strongly to the natural gases given off by other types of fruit and vegetables are: Kiwis, broccoli, cauliflower, Brussels sprouts, mangos, honeydew melons, apples, apricots, cucumbers, tomatoes, pears, nectarines and peaches. Example : Broccoli should not be stored with apples, as apples produce a large[...]

Moving the shelves The shelves can be adjusted according to the height of the food. ^ Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level. The raised edge at the back must face upwards to prevent food from touching the back of the applia[...]

The refrigerator defrosts automatically. Condensate and frost can build up on the back wall of the refrigerator whilst it is in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the appliance. The condensate is drained away via a channel and drain hole into an evaporation system at the [...]

A range of Miele branded cleaning and conditioning products is available to order from Miele or from www.miele-shop.com. Make sure that water cannot penetrate into the electronic unit or into the light. Do not let water get into the condensate channel and drain hole when cleaning. Do not use steam cleaning apparatus to clean the appliance. Steam co[...]

The temperature of the dishwasher programme must not exceed 55 °C. Contact with some foodstuffs, such as carrots, tomatoes or ketchup can cause plastic items to discolour. However, this discolouration will not affect the stability of plastic items. ^ Clean the interior shelves and drawers by hand. These are not suitable for cleaning in a dishwashe[...]

Ventilation gaps ^ The ventilation gaps should be cleaned regularly with a brush or vacuum cleaner. A build-up of dust will increase the energy consumption of the appliance. Door seal Do not use any oils or grease on the door seal as these will cause the seal to deteriorate and become porous over time. The door seal should be cleaned regularly with[...]

Some minor problems can be corrected without contacting Miele. If having followed the suggestions below, you still cannot remedy the fault, please contact Miele. To prevent unnecessary loss of temperature it is advisable not to open the door while waiting for the appliance to be serviced. Installation, maintenance and repairs may only be carried ou[...]

Problem Possible cause Remedy The appliance is switching in too frequently or for too long. The ventilation gaps have been covered over or become dusty. ^ Do not cover or block the ventilation gaps. ^ Dust the ventilation gaps and the heat exchanger regularly. The metal grille (heat exchanger) at the rear of the appliance has become dusty. The door[...]

Problem Possible cause Remedy The appliance is switching in too frequently or for too long. To save energy, the compressor runs at a lower speed, but for longer, when less cooling is required. The Super cool function is still switched on. The Super cool function switches itself off automatically after approx. 6 - 12 hours. You can switch off the Su[...]

Problem Possible cause Remedy The interior lighting is not working. The lighting switches itself off automatically after approx. 15 minutes if the door is left open. If it does not come on when the door is opened briefly, but the temperature display is working, then the lighting is defective. ^ Disconnect the appliance from the mains. ^ Press the s[...]

Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrr[...]

In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your applianc[...]

Demo mode r The appliance can be demonstrated in the showroom or at exhibitions in "Demo mode". In this mode the interior lighting, the display and the controls are functioning but the compressor remains switched off. Demo mode is represented in the display by the r symbol. To activate Demo mode ^ Press the On/Off button. ^ Press the On/O[...]

Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply. Please ensur[...]

Do not place any appliance which gives off heat, such as a toaster or microwave oven, on top of this appliance, as this would increase the appliance's energy consumption. This appliance must not be installed directly next to another refrigerator or freezer. It does not have side-wall heating, so installation next to another refrigerator or fre[...]

Ventilation Air at the back of the appliance gets warm. To ensure sufficient ventilation the ventilation gaps must not be covered over. The air inlet and outlet must not be covered or blocked in any way. They should be dusted on a regular basis. Installation ^ Remove the cable clip from the back of the appliance. ^ Check that all parts at the back [...]

Appliance dimensions ABCD E K 12421 SD 1447 mm 600 mm 631 mm 1176 mm 646 mm Installation 37[...]

The appliance is supplied right-hand hinged. If left-hand door hinging is required, follow the instructions below. You will need the following tools: – A Torx ® 15 and a Torx ® 25 screwdriver, – a flat-bladed screwdriver, – a spanner (supplied). Two people are needed for changing the door hinging. Removing the door handle ^ Pull door handle[...]

^ Pull out spacer pin p from beneath the left-hand side of the door. ^ Open the door. ^ Holding the door at the bottom and on the handle side, carefully lift it upwards and off. This will release hinge pin e with washer o from hinge plate d .I fi t does not release: ^ Press hinge pin e with washer o out of the hinge plate from below. ^ Undo screws [...]

^ Unscrew upper hinge pin k using a suitable spanner. ^ Using a flat-bladed screwdriver remove covers l from the front. ^ Screw in upper hinge pin k on the opposite side using a suitable spanner. ^ Refit covers l from the back on the opposite side, and then click them into place at the front. ^ Remove caps m from the door bearing bush in the door a[...]

^ Take the door and guide the upper door bearing bush onto upper hinge pin k . ^ Pivot the door and place hinge pin e into hinge plate d . Important. Turn the hinge pin if necessary, so that the tab is pointing to the inside of the door and the notch to the outside. The hinge pin will then click into place. ^ With the help of another person, carefu[...]

It is important to check that the side section of handle d does not come into contact with the door seal when opening the door, as this would damage the door seal permanently. If, after you have refitted the handle, you find that the side section does touch the door seal when the door is opened: ^ Realign mounting plate c with grub screws a until t[...]

The appliance door can be aligned to the housing using the outer long slots in the lower hinge plate. In the following illustration the door is not shown in the closed position to make it easier to see what you have to do. ^ Remove centre screw a from the hinge plate. ^ Slightly loosen both outer screws b . ^ Align the door by sliding the hinge pla[...]

a Top box b Appliance c Housing unit d Wall The appliance can be installed in a kitchen run. To match the height of the rest of the kitchen, the appliance can be fitted with a suitable top box a . A ventilation gap of at least 50 mm depth must be allowed for behind the appliance across the entire width of the top box for air to circulate. The cross[...]

45[...]

46[...]

47[...]

Alteration rights reserved / 4811 K 12421 SD M.-Nr. 09 290 820 / 00[...]