Mitsubishi Electronics FX3S-30MT/ESS-2AD Bedienungsanleitung

FX 3S SERIES PROGRAMMABLE CONTROLLERS USER'S MANUAL Hardware Edition Main Unit AC Power Type FX 3S -  MR/ES FX 3S -  MT/ES FX 3S -  MT/ESS FX 3S -30MR/ES-2AD FX 3S -30MT/ES-2AD FX 3S -30MT/ESS-2AD DC Power Type FX 3S -  MR/DS FX 3S -  MT/DS FX 3S -  MT/DSS Display Module FX 3S -5DM Memory Cassette FX 3G -EEPROM-32L[...]

[...]

Safety Precautions (Read these precautions before use.) (1) Before installation, operation, maintenance or inspection of this product, thoroughly read through and understand this manual and all of the associated manuals. Also, take care to handle the module prope rly and safely. This manual classifies the safety precautions into two categories: and[...]

Safety Precautions (Read these precautions before use.) (2) 2. INSTALLATION PRECAUTIONS Reference • Make sure to cu t off all phas es of the power supply external ly before att empting inst allation or wi ring work. Failure to do so may ca use electr ic shock or damage to t he product. 51 Reference • Use the produ ct within the generic enviro n[...]

Safety Precautions (Read these precautions before use.) (3) 3. WIRING PRECAUTIONS Reference • Make sure to cu t off all phas es of the power supply external ly before att empting inst allation or wi ring work. Failure to do so may ca use electr ic shock or damage to t he product. • Make sure to attach the termi nal cover, offe red as an accesso[...]

(4) Safety Precautions (Read these precautions before use.) 4. STARTUP AND MAINTEN ANCE PRECAUTION S 5. DISPOSAL PRECAUTIONS 6. TRANSPORTATION AND STORA GE PRECAUTION S Reference • Do not touch an y terminal whi le the PLC's powe r is on. Doing so may cause elec tric shock or malfunctio ns. • Before clea ning or retigh tening termi nals, c[...]

1 FX 3S Series Programmable Controllers User's Manual - Hardware Edition FX 3S Series Programmable Controllers User's Manual [Hardware Edition] Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation, safe use and operation of the FX 3S Series Programmable Controllers and shoul[...]

2 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Outline Precautions • This manual provides information for the use of the FX 3S Series Programmable Controllers. The manual has been written to be used by trained and competent personnel. The definition of such a person o r persons is as follows; a) Any engineer who is [...]

3 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition Table of Contents SAFETY PRECAUTIONS .................................................... .............................................. (1) Standards ................ .............. ........... .............. ........... .............. ............ ....[...]

4 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4.7 Terminal Layout ........................................................................................................... ................. 37 4.7.1 Interpretation of terminal block layout........... .............. ................. .............. [...]

5 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8. Preparation for Wiring and Power Supply Wiring Procedures 64 8.1 Preparation for Wiring ................................................................................................................... 66 8.1.1 Wiring procedures ................. ..[...]

6 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11. Use of Built-in Analog 98 11.1 Outline .................................................................................................................. ....................... 99 11.2 Built-in variable analog potentiometer function ................[...]

7 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14.3.3 Program modification func tion ................. .............. ........... .............. ........... .............. ......... ......... 130 14.4 Maintenance and Periodic Inspection ................................................................[...]

8 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5.3 When "Input (X)", "Output (Y )", "Auxiliary relay (M)" or "State (S )" is selected ..... .............. ...... 158 16.5.4 When "Timer (T)" is selected ........... .............. .............. ....[...]

9 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix B: Instruction L ist 201 Appendix B-1 Basic Instructions ........ ................ ................. ............. ................ ................ ......... 201 Appendix B-2 Step Ladder Instructions ....... ................... ................[...]

Standards 10 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Standards Certification of UL, cUL standards FX 3S series main units, FX 3S series interface adapter and FX 3U series special adapters supporting UL, cUL standards are as follows: UL, cUL file number: E95239 Models: MELSEC FX 3S /FX 3U series manufactured Compl[...]

Standards 11 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Requirement for Complianc e with LVD directive The following products have shown compliance through direct testing (of the identified standards below) and design analysis (through the creation of a technical construction file) to the European Directive for Low [...]

Standards 12 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Caution for compliance with EC Directive 1. Installation in Enclosure Programmable logic controllers are open-type devices that must be installed and used within conductive control boxes. Please use the FX 3S Series programmable logic contro llers while install[...]

1 Introduction 1.1 Introduc tion of Manuals 13 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed C[...]

1 Introduction 1.1 Introduc tion of Manuals 14 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1.1.2 Manual organization a nd position of this manual This manual describes detail on the hardware, including the system configuration, installation and wiring. The instructions, communication control, analog control and posit[...]

1 Introduction 1.1 Introduc tion of Manuals 15 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed C[...]

1 Introduction 1.1 Introduc tion of Manuals 16 FX 3S Series Programmable Controllers User's Manual - Hardware Edition  RS-232C/RS- 422/RS-485 When using eac h product, re fer also to the User's Manual - Hardware Edit ion for the PLC m ain unit to be in stalled and FX Series User's Manual - Data Communication E dition. For th e MOD[...]

1 Introduction 1.1 Introduc tion of Manuals 17 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed C[...]

1 Introduction 1.2 Generic Names and Abbrevia tions Used in Manuals 18 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1.2 Generic Names and Abbr eviations Used in Manuals Abbreviation/ generic n ame Description PLCs FX 3S Series Generic name for FX 3S Series PLCs FX 3G Series Generic name for FX 3G Series PLCs FX 3U Ser[...]

2 Features and Part Nam es 2.1 Major Features 19 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed[...]

2 Features and Part Nam es 2.1 Major Features 20 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3. Display functions (display module) (Supported in Ver. 1.20 or later) FX 3S -5DM Display Module (option) can be installed on the PLC. [Monitor/test fun ction] Devices can be monitored and tested by operating the buttons on [...]

2 Features and Part Nam es 2.2 Names and Functions of Parts 21 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring [...]

2 Features and Part Nam es 2.2 Names and Functions of Parts 22 FX 3S Series Programmable Controllers User's Manual - Hardware Edition When the top covers are open When the terminal block covers are open [1] Optional e quipment connector These holes are designe d to secure the expansi on board, di splay modul e and memory cassette wi th screws.[...]

2 Features and Part Nam es 2.2 Names and Functions of Parts 23 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring [...]

3 Introduction of Products 24 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3.1 List of Products and Interpretat ion of Model Names 3. Introduction of Products 3.1 List of Products and Inte rpretation of Model Names The following system configuration is classified into pr oduct groups A to F in the product introduction[...]

3 Introduction of Products 25 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 3.1 List [...]

3 Introduction of Products 26 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3.1 List of Products and Interpretat ion of Model Names 3.1.2 Expansion boards *1. Supported in FX 3S PLC Ver. 1.10 or later. 3.1.3 Connector conversion adapter 3.1.4 Special adapters *1. The FX 3U -ENET-ADP Ver. 1.20 or later is applicable to [...]

3 Introduction of Products 27 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 3.2 Conne[...]

3 Introduction of Products 28 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3.2 Connector Types and Cables f or Program Communication 3.2.1 Programming tool The following programming tools support FX 3S Series PLCs.  For more information, re fer to 5. Version Inf ormation and Peripheral Eq uipment Connectabilit y[...]

29 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio[...]

30 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.2 Power Supply Sp ecifications 4.1.1 Dielectric withsta nd voltage test and insu lation resistance test Perform dielectric withstand voltage test and insulation resistance test at the following vo[...]

31 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio[...]

32 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.4 Output Speci fications 4.4 Output Specifications The output specifications for the main unit are explained below. 4.4.1 Relay output specific ations Item Relay outpu t specifi cation FX 3S -10MR[...]

33 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio[...]

34 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.5 Performance Specifications 4.5 Performance Specifications The performance specifications for the main unit are explained below. Item Performance Operation control system Stored progr am repetiti[...]

35 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio[...]

36 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.6 External Dimensions (Wei ght/Accessories/Inst allation) 4.6 External Dimensions (Weight/Accessories/Installation) The external dimensions of the main unit are explained. 4.6.1 Main units 1) Acce[...]

37 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio[...]

38 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.7 Terminal Layout 4.7.2 FX 3S -10M  • AC power type • DC power type 4.7.3 FX 3S -14M  • AC power type • DC power type S/S N L X1 X2 X3 X4 X5 Y2 Y0 COM 1 COM2 COM0 COM3 Y3 FX 3S -10MR[...]

39 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio[...]

40 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.1 Version Informat ion 5. Version Information and Peripheral Equipment Connectability 5.1 Version Information 5.1.1 Manufacturer's serial number check method The year and month of production of the pr[...]

41 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 5 Version Information and Peripheral[...]

42 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.2 Programming Tool Appli cability 5.2.3 Program transfer sp eed and programming tools 1. Built-in USB communication The FX 3S PLC has a built-in USB communication port, and performs program writing, progra[...]

43 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 5 Version Information and Peripheral[...]

44 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.2 Programming Tool Appli cability Item Caution Circuit bloc ks which requ ire attentio n on opera tion afte r write during RU N Avoid write during RUN to a circuit block inclu din g the following instr uct[...]

45 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 5 Version Information and Peripheral[...]

46 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.4 Cautions on using FA transparent function in GOT1000 Series 5.4 Cautions on using FA transp arent function in GOT1000 Series When monitoring circuits, device monitor, etc. or reading/writing programs in [...]

47 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 5 Version Information and Peripheral[...]

48 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.6 Other Peripheral Equipment Appli cability 5.6 Other Peripheral Equipment Applicability 5.6.1 Other peripheral equipment applicability Model name Appl icability Remar ks GOT1000 Seri es Applicable Standar[...]

6 Examination of System C onfiguration 6.1 Configurati on of a Whole System 49 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng[...]

6 Examination of System C onfiguration 6.1 Configurati on of a Whole System 50 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Restrictions in the use of the FX 3G -422-BD When connecting a device (such as GOT) which consumes an internal 5 V DC to each of the RS-422 port built in the main unit and the FX 3G -422-BD at th[...]

7 Installation In Enclosure 51 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7. Insta[...]

7 Installation In Enclosure 52 FX 3S Series Programmable Controllers User's Manual - Hardware Edition WIRING PRECAUTIONS • Make sure to cu t off all phas es of the power supply external ly before att empting inst allation or wi ring work. Failure to do so may ca use electr ic shock or damage to t he product. • Make sure to attach the term [...]

7 Installation In Enclosure 53 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.1 Inst[...]

7 Installation In Enclosure 54 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.2 Examination for Installing Method in En closure 7.2 Examination for Installi ng Method in Enclosure Examine the installation location of PLC in consideration of the environmental conditions (generic specifications). The PLC can be installe[...]

7 Installation In Enclosure 55 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.3 Proc[...]

7 Installation In Enclosure 56 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.3 Procedures for Install ing on and Detaching from DIN Rail 7.3.3 Removal of main unit Removal procedure 1 Open the terminal bloc k cover , and remove the lower terminal block cover (A in the right figure). 2 Disconnect the connecting cables[...]

7 Installation In Enclosure 57 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.4 Proc[...]

7 Installation In Enclosure 58 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.5 Connecting Methods for Main Unit and Extensi on Devices 7.4.2 Example of m ounting hole pitches The figure below shows an example when the FX 3S -30MT/ES, FX 3S -CNV-ADP and FX 3U -232ADP(-MB) are used. 7.4.3 Installation of main unit Moun[...]

7 Installation In Enclosure 59 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.5 Conn[...]

7 Installation In Enclosure 60 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.5 Connecting Methods for Main Unit and Extensi on Devices 7.5.3 Connecting method B - connection of connector conversion adapter This subsection explains how to connect the connector conversion adapter to the main unit. Connection procedure [...]

7 Installation In Enclosure 61 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.5 Conn[...]

7 Installation In Enclosure 62 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.6 Application of l abels 7.6 Application of labels The label is packed together with the expansion board (FX 3G -485-BD, FX 3G -485-BD-RJ, FX 3G -8AV- BD). Place it in a position where it can be seen easily for simple reference. 7.6.1 Applic[...]

7 Installation In Enclosure 63 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.6 Appl[...]

64 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8. Preparation for Wiring and Power Supply Wiring Procedures DESIGN PRECAUTIONS • Make sure to have the followi ng safety circu its outsid e of the PLC to ensure safe system oper ation even dur ing externa[...]

65 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we[...]

66 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8.1 Preparation for Wiri ng 8.1 Preparation for Wiring 8.1.1 Wiring procedures Before starting wiring work, make sure that the main power is off. 1 Prep are the p art s for wiring. Prepare the solderless ter[...]

67 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we[...]

68 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8.2 Cable Conn ecting Procedures 8.2.2 Terminal block (for European) [e xpansion board and special adapters] The expansion boards and special adapters of a terminal block type have terminal blocks for Europe[...]

69 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we[...]

70 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8.2 Cable Conn ecting Procedures 8.2.4 Grounding terminal of the FX 3U -ENET-ADP The grounding terminal of the FX 3U -ENET-ADP is a M2.5 screw. 1. Applicable cables 2. Treatment of electric wire ends • Whe[...]

71 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we[...]

72 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8.4 Examples of External Wiring [AC powe r type] 8.4 Examples of External Wiring [AC power type] 24 V DC service power supply of the main unit can be used as a power supply for loads. *1. Connect the AC powe[...]

73 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we[...]

9 Input Wiring Procedures 74 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9. Input Wiring Procedures DESIGN PRECAUTIONS • Make sure to have the followi ng safety circu its outsid e of the PLC to ensure safe system oper ation even dur ing external po wer supply problems or PLC failur e. Otherwise, malfunctions may ca[...]

9 Input Wiring Procedures 75 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters WIRING PRE[...]

9 Input Wiring Procedures 9.1 Before Starti ng Input Wiring 76 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9.1 Before Starti ng Input Wiring 9.1.1 Sink and source input The input terminals (X) of the main unit are common to sink/source input of 24 V DC internal power. 1. Differences between the sink input circuit and[...]

9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 77 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9[...]

9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 78 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3. Input sensitivity The PLC input current and input sensitivity are shown in the following table. When there is a series diode or resistance at the input contact or there is a parallel resistance [...]

9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 79 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9[...]

9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 80 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9.2.3 Examples of external wiring [AC power type] 1. Sink input 2. Source input *1. Handle the power supply circuit correctly in a ccordance with Chapter 8 "Preparation for Wiring and Power Su[...]

9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 81 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9[...]

9 Input Wiring Procedures 9.3 Input Int erruption (I00  to I50  ) 82 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9.3 Input Interruption (I00  to I50  ) The main unit is provided with an input interruption function and has 6 interruption input points. Make sure that the ON duration or OFF duration of inter[...]

9 Input Wiring Procedures 9.3 Input Int erruption (I00  to I50  ) 83 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 I[...]

9 Input Wiring Procedures 9.4 Pulse Catch (M8170 to M8175) 84 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9.4 Pulse Catch (M8170 to M8175) The main unit is provided with a pulse catch function and has 6 pulse catch input points.  For details on progr amming, refer to the pr ogramming manual. 9.4.1 Allocation of[...]

9 Input Wiring Procedures 9.4 Pulse Catch (M8170 to M8175) 85 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 1[...]

10 Use of Hi gh-speed Coun ters 86 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.1 Outline 10. Use of High-speed Counters 10.1 Outline High-speed counters use input terminals (X000 to X007) of the main unit for inputs, and offer counting up to 60 kHz (1-phase). Input terminals not used for high-speed counters are av[...]

10 Use of Hi gh-speed Coun ters 87 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.3[...]

10 Use of Hi gh-speed Coun ters 88 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.4 Allocation of Device Numbers to Input Numbers 10.4 Allocation of Device Numbers to Input Numbers The high-speed counter numbers are allo cated to the input terminals X000 to X007 as shown in the following table. The input terminals no[...]

10 Use of Hi gh-speed Coun ters 89 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.5[...]

10 Use of Hi gh-speed Coun ters 90 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.5 Handling of High-speed Co unters • C235 is set to the up-count or down-count mode through interruption by the count input X000. • When the current value increases from -6 to -5, the output contact is set, and when the value decrea[...]

10 Use of Hi gh-speed Coun ters 91 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.5[...]

10 Use of Hi gh-speed Coun ters 92 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.6 Timing of Updati ng of Current Value and Comparison of Current Value 10.6 Timing of Updating of Current Va lue and Comparison of Current Value 10.6.1 Timing of updating of current value When pulses are input to an input terminal for a[...]

10 Use of Hi gh-speed Coun ters 93 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.7[...]

10 Use of Hi gh-speed Coun ters 94 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.8 Examples of External Wirin g (Rotary Encoder) 10.8 Examples of External Wiring (Rotary Encoder) 10.8.1 1-phase 1-input [C235 to C245] The following examples of wiring apply to the cases where C235 is used. When another high-speed coun[...]

10 Use of Hi gh-speed Coun ters 95 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.8[...]

10 Use of Hi gh-speed Coun ters 96 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.9 Related Devices and Func tion Switching Procedures 10.9 Related Devices and Function Switching Procedures 10.9.1 Related devices 1. For switching 1-phase 1-count inpu t counter mode to up-count or down-count 2. For monitoring of up-co[...]

10 Use of Hi gh-speed Coun ters 97 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.1[...]

11 Use o f Built-in An alog 98 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11. Use of Built-in Analog WIRING PRECAUTIONS • Make sure to cu t off all phas es of the power supply external ly before att empting inst allation or wi ring work. Failure to do so may ca use electr ic shock or damage to t he product. WIRING[...]

11 Use o f Built-in An alog 99 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruct[...]

11 Use o f Built-in An alog 100 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11.2 Built-in varia ble analog potentio meter function 11.2.4 Use example of variable analog potentiometer 1. Example 1 The current value of VR1 is used as the set value of a timer (T0). 2. Example 2 The current value of VR2 multiplied by &qu[...]

11 Use o f Built-in An alog 101 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruc[...]

11 Use o f Built-in An alog 102 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11.3 Built-in analog input functi on 11.3.4 Analog input terminal block The analog inputs use a European terminal block. Use the following cables to connect with the counterpart equipment. Termina te the cable ends as shown below. 1. Wire siz[...]

11 Use o f Built-in An alog 103 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruc[...]

11 Use o f Built-in An alog 104 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11.3 Built-in analog input functi on 2. Averaging tim e If the averaging time is set in the PLC, the averaged data will be stored as the input data. The averaging time can be set for each channel. Set the averaging time in the following speci[...]

11 Use o f Built-in An alog 105 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruc[...]

11 Use o f Built-in An alog 106 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11.3 Built-in analog input functi on 11.3.10 Troubleshooting when using built-in analog input This subsection describes troubleshooting methods and error statuses. If the A/D conversion data is not input, or if the proper digital value is not[...]

11 Use o f Built-in An alog 107 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruc[...]

12 Output Wiring P rocedures 108 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 12. Output Wiring Procedures DESIGN PRECAUTIONS • Make sure to have the followi ng safety circu its outsid e of the PLC to ensure safe system oper ation even dur ing external po wer supply problems or PLC failur e. Otherwise, malfunctions [...]

12 Output Wiring P rocedures 109 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru[...]

12 Output Wiring P rocedures 110 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 12.1 External Wiring for Relay Ou tput Type 12.1 External Wiring fo r Relay Output Type This section explains "handling of relay output", "external wiring precautions" and "example of external wiring".  Fo[...]

12 Output Wiring P rocedures 111 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru[...]

12 Output Wiring P rocedures 112 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 12.1 External Wiring for Relay Ou tput Type 12.1.4 Example of external wiring *1. The output circuit of this PLC does not have a built-in fuse. Provide a fuse suit able to each lo ad to prevent b lowout of the wi res on the c ircuit board ca[...]

12 Output Wiring P rocedures 113 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru[...]

12 Output Wiring P rocedures 114 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 2.2 External Wiring of Transistor Output (Sink/Source) Type 2. External power supply For driving the load, use a smoothing power supply of 5 to 30 V DC that can output current two or more times the rated current of the fuse connected to th[...]

12 Output Wiring P rocedures 115 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru[...]

12 Output Wiring P rocedures 116 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 2.2 External Wiring of Transistor Output (Sink/Source) Type 12.2.4 Example of external wiring 1. Transistor output (Sink) *1. The output circuit of this PLC does not have a built-in fuse. Provide a fuse suit able to each lo ad to prevent b[...]

12 Output Wiring P rocedures 117 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru[...]

13 Examples of Wiring for Various Uses 118 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 13. Examples of Wiring for Various Uses DESIGN PRECAUTIONS • Make sure to have the followi ng safety circu its outsid e of the PLC to ensure safe system oper ation even dur ing external po wer supply problems or PLC failur e. Oth[...]

13 Examples of Wiring for Various Uses 119 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-[...]

13 Examples of Wiring for Various Uses 120 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 13.2 Digital Switch [DSW Instruction (FNC 72)/BIN Instruct ion (FNC 19)] 13.2 Digital Switch [DSW Instructio n (FNC 72)/BIN Instruction (FNC 19)] 13.2.1 When DSW instruction (FNC 72) is used Examples of wiring for capturing values [...]

13 Examples of Wiring for Various Uses 121 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-[...]

13 Examples of Wiring for Various Uses 122 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 13.3 Input Matrix [MTR I nstruction ( FNC 52)] 13.3 Input Matrix [MTR Instruction (FNC 52)] This section gives examples of wiring for capturing the ON/OFF status of 24 switches to M30 to M37, M40 to M47 and M50 to M57 using MTR ins[...]

13 Examples of Wiring for Various Uses 123 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-[...]

13 Examples of Wiring for Various Uses 124 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 13.4 Seven Segment with Latch [SEGL Instruction (FNC 74)/ BCD Instruction (FNC 18)] 13.4.2 When BCD instruction (FNC 18) is used This subsection gives examples of wiring for displa ying the current value of D100 on the 2-digit 7-se[...]

125 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

126 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.1 Preparation for Te st Operation 14.1 Preparation for Test Operation 14.1.1 Preliminary inspection [power OFF] Incorrect connection of the power supply terminal, contact of the DC input wire and power[...]

127 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

128 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.2 Running and Sto pping Procedures [ Power ON] 14.2 Running and Stopping Procedures [Power ON] 14.2.1 Methods of running and stopping FX 3S PLCs can be started or stopped by any of the following three [...]

129 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

130 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.3 Operation and Test [Power ON and PLC Runni ng] 14.3 Operation and Test [Pow er ON and PLC Running] 14.3.1 Self-diagnostic function When the PLC’s power is turned on, its self-diagnostic f unction s[...]

131 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

132 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.5 Troubleshooti ng with LEDs 14.5 Troubleshooting with LEDs When trouble occurs, check the LEDs on the PLC to identify the problem with the PLC. 14.5.1 POW LED [on/flashing/off] 14.5.2 ERR LED [on/flas[...]

133 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

134 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.6 Judgment by Error Codes and Representation of Error Codes 14.6.2 Representation of errors Errors are represented in this manual and GX Works2 as shown in the following table. This manu al GX Works2 P[...]

135 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

136 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.6 Judgment by Error Codes and Representation of Error Codes Parameter er ror [M80 64 (D8064)] 0000 - No error 6401 Stops operation Program sum c heck erro r STOP the PLC, and co rrectly set the paramet[...]

137 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

138 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.6 Judgment by Error Codes and Representation of Error Codes Operation e rror [M8067 (D8067)] 6740 Continues operation Sampling time (T S )  Scan time <Auto tuning is co ntinued.> The operatio [...]

139 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

140 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.7 Troubleshooti ng 14.7 Troubleshooting  For the procedure s on running and stopp ing the PLC, refer to Section 14.2.  For the procedures on operating pe ripheral devices, refer to the ma n[...]

141 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod[...]

15.1 Special Adapt ers 142 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15. Other Extension Devices and Optional Units (External Dimensions and Terminal Arrangement) 15.1 Special Adapters 15.1.1 FX 3U -4AD-ADP External Di[...]

15.1 Special Adapt ers 143 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction [...]

15.1 Special Adapt ers 144 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15.1.6 FX 3U -4AD-TC-ADP External Dimensions, Terminal Layout • MASS (Weight): Approx. 0.1 kg (0.22 lbs) • Installation: DIN rail of 35 mm (1.38&[...]

15.1 Special Adapt ers 145 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction [...]

15.2 Expansion Board 146 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15.2 Expansion Board 15.2.1 FX 3G -4EX- BD External Dimensions • MASS(Weight): Approx. 20g (0.05lbs) • Accessories: Two M3×8 tapping screws (for i[...]

15.2 Expansion Board 147 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction Li[...]

15.2 Expansion Board 148 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15.2.5 FX 3G -485-BD External Dimensions • MASS (Weight): Approx. 20 g (0.05 lbs) • Accessories: Two M3×8 tapping screws (for installation of boar[...]

15.2 Expansion Board 149 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction Li[...]

15.2 Expansion Board 150 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15.2.9 FX 3G -8AV-BD External Dimensions • MASS (Weight): Approx. 20 g (0.05 lbs) • Accessories: Two M3×8 tapping screws (for installation of boar[...]

15.3 Connector Conversion Adapt er 151 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B [...]

16 Display Modu le (FX3S-5DM) 152 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.1 Specifi cations 16. Display Module (FX 3S -5DM) 16.1 Specifications 16.1.1 Applicable PLC 16.1.2 Display Specifications STARTUP AND MAINTENANCE PRECAUTIONS • Before modi fying or disrupting t he program in operati on or running the P[...]

16 Display Modu le (FX3S-5DM) 153 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 154 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.2 Inst allation an d Removal 16.2.2 Installation and Removal (when the expansion board/connector c onversion adapter is used together) The FX 3S -30MT/ES is used as the main unit and the expansion board is used together in this example. [...]

16 Display Modu le (FX3S-5DM) 155 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 156 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.4 Flowing of the Screen Display 16.4 Flowing of the Screen Display Press the [OK] button Press other button of the display module Error occurrence Time display Selecting a device Monitor/test Time setting  Refer to Section 16.6. Error[...]

16 Display Modu le (FX3S-5DM) 157 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 158 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5 Monito r/Test 16.5.3 When "Input (X)", "Output (Y)", "Auxiliary relay (M)" or "State (S)" is selected "Input (X)", "Output (Y)", "Auxiliary relay (M)" and "Stat[...]

16 Display Modu le (FX3S-5DM) 159 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 160 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5 Monito r/Test 16.5.4 When "Timer (T)" is selected Monitoring and testing can be performed for the timer (T). 1. Description of display *1. Displayed when a hexadecimal is specified. *2. Displayed while timer (T) is ON. *3. Di[...]

16 Display Modu le (FX3S-5DM) 161 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 162 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5 Monito r/Test 16.5.5 When "Counter (C)" is selected Monitoring and testing can be performed for the counter (C). 1. Description of display *1. Displayed when hexadecimal is specified. *2. Displayed while counter (C) is ON. *3[...]

16 Display Modu le (FX3S-5DM) 163 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 164 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5 Monito r/Test 16.5.6 When "Data register (D)" is selected Monitoring and testing can be perfo rmed for the data register (D). 1. Description of display *1. Displayed when hexadecimal is specified. *2. In the case of 16-bit da[...]

16 Display Modu le (FX3S-5DM) 165 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 166 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.6 Time Dis play and Settin g 16.6 Time Display and Setting Display and setting can be performed for the current time. 1. Time display Year, month, day, hour and minute are displayed when the power is turned ON. 2. Time setting 1) Press a[...]

16 Display Modu le (FX3S-5DM) 167 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 168 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.9 Specifie d Device Monitor Fu nction 16.8.2 System information setting program example The following is a program example in which the system information has been assigned to D130 to D134 and M400 to M414. 16.9 Specified Devi ce Monitor[...]

16 Display Modu le (FX3S-5DM) 169 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 170 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.9 Specifie d Device Monitor Fu nction 16.9.3 Program example2 (when monitoring consecutive timers using operation button) In this program example, the device type to be displayed on the specified device monitor screen is set to "tim[...]

16 Display Modu le (FX3S-5DM) 171 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 172 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.9 Specifie d Device Monitor Fu nction 16.9.5 Specified devi ce editing function Devices displayed in the specified device monitor function can be edited. 1. System signal 1 *1. Maximum or minimum value of the corresponding device if the [...]

16 Display Modu le (FX3S-5DM) 173 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 174 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.10 Back l ight off functio n 16.10 Back light off function Use this function to turn OFF the backlight after the specified time. The initial value is "10 minutes". The backl ight will turn OFF 10 minutes later if the backlight [...]

16 Display Modu le (FX3S-5DM) 175 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr[...]

16 Display Modu le (FX3S-5DM) 176 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.13 Operati on Button ON/OFF Infor mation 16.13 Operation Button ON/OFF Information Operation button ON/OFF information can be monitored at the system information (system signal 2) "M +4 to M +7" while the PLC is running. [...]

17 Memory Cassette 177 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List[...]

17 Memory Cassette 178 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.3 Installatio n 17.3 Installation Be sure that the power is OFF when installing the memory cassette. 17.3.1 Installation (when the expansion board/connector conversion adapter is not used together) Installation procedur e 1 Remove the top cover (A [...]

17 Memory Cassette 179 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List[...]

17 Memory Cassette 180 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.3 Installatio n 6 Fix the memory cassette (F in the right figure) with provided M3 t apping screws (E in the right figure) to the exp ansion board or connector conversion adapter . • Tightening torque: 0.3 to 0.6 N•m Caution • Two types of M3[...]

17 Memory Cassette 181 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List[...]

17 Memory Cassette 182 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.4 Removal 17.4.2 Removal (when the expansion board/connector c onversion adapter ar e used together) Removal procedure 1 Raise the memory cassette det achment lever (A in the right figure). 2 Remove the t apping screws (B in the right figure) which[...]

17 Memory Cassette 183 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List[...]

17 Memory Cassette 184 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.6 PROTECT Switch 17.6 PROTECT Switch 17.6.1 PROTECT switch setting Reading from and writing to memory cassette operations can be performed by using the programming tool. Because sequence programs are written by an electronic format, a special ROM w[...]

17 Memory Cassette 185 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List[...]

17 Memory Cassette 186 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.8 Memory cass ette precautions for use 17.7.2 Reading (RD: FX 3G -EEPROM-32L <- PLC) Programs are read from the PLC's internal RAM memory to the memory cassette. Required condition: The PLC must be stopp ed, and the PROTECT switch must be O[...]

Appendix A : Special Device Li st 187 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I[...]

Appendix A : Special Device Li st 188 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-1 Special Auxiliary Relay (M8 000 to M8511) *1. Cleared when PLC switches from RUN to STOP. *2. Executed at END instruction. *3. Cleared when PLC power supply from OFF to ON. *4. Cleared when PLC switches from STOP to RUN. *5[...]

Appendix A : Special Device Li st 189 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I[...]

Appendix A : Special Device Li st 190 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-1 Special Auxiliary Relay (M8 000 to M8511) *1. Backed up against power interruption, and automatically cleared when M8312 itself is cleared or when the clock data is set again. Number and name Operation and function Correspo[...]

Appendix A : Special Device Li st 191 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I[...]

Appendix A : Special Device Li st 192 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-1 Special Auxiliary Relay (M8 000 to M8511) Number and name Operation and function Correspond- ing special device FX 3U -ENET-ADP [ch1] [M]8490 to [M]8 491 Not used - M 8492 IP add ress storag e area write request - [M]8493 I[...]

Appendix A : Special Device Li st 193 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I[...]

Appendix A : Special Device Li st 194 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-2 Special Data Register (D8 000 to D8511) *1. Cleared when PLC power supply from OFF to ON. *2. Cleared when PLC switches from STOP to RUN. *3. “4” is displayed even when the memory capacity is set to 16 K steps in the pa[...]

Appendix A : Special Device Li st 195 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I[...]

Appendix A : Special Device Li st 196 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-2 Special Data Register (D8 000 to D8511) *1. 1 ms ring counter (D8399, D8398) will operate after M8398 turns ON. *2. Cleared when PLC switches from RUN to STOP. Number and name Content of registe r Correspond- ing special de[...]

Appendix A : Special Device Li st 197 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I[...]

Appendix A : Special Device Li st 198 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-3 Analog expansion boards [M8260 to M8269 and D8260 to D8269] Appendix A-3 Analog expansion boards [M 8260 to M8269 and D8260 to D8269] When analog expansion boards are connected, operations and f unctions are assigned to the[...]

Appendix A : Special Device Li st 199 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I[...]

Appendix A : Special Device Li st 200 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-4 Analog special adapters [ M8280 to M8289 and D8280 to D8289] Appendix A-4-2 Special data registers (D82 80 to D8289) Number Operation and function FX 3U -4AD-ADP FX 3U -4DA-A DP FX 3U -3A-ADP D 8280 Input data Ch1 Out put d[...]

Appendix B: In struction Lis t 201 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Inst[...]

Appendix B: In struction Lis t 202 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendi x B-3 Applied Instru ctions ... in Ascending Order of FNC Number Appendix B-3 Applied Instructions .. . in Ascending Order of FNC Number FNC No. Mnemonic Functio n Program Flow 00 CJ Conditional Jump 01 CA LL Call Subrou tine 02 S [...]

Appendix B: In struction Lis t 203 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Inst[...]

Appendix B: In struction Lis t 204 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendi x B-3 Applied Instru ctions ... in Ascending Order of FNC Number MEMO[...]

205 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued models Appendix C: Di scontinued models FX 3S Series Programmable Controllers U[...]

206 Appendix C: Di scontinued models FX 3S Series Programmable Controllers User's Manual - Hardware Edition MEMO[...]

207 Warranty FX 3S Series Programmable Controllers User's Manual - Hardware Edition Warranty Please confirm the following product warranty details before using this product. 1. Gratis Warranty Term and Gratis Warranty Range [Gratis Warranty Term] If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsu[...]

208 Revised History FX 3S Series Programmable Controllers User's Manual - Hardware Edition Revised History Date Revision Desc ription 5/2013 A First Edition 9/2013 B • The foll owing products are a dded: - Main unit of the built-in anal og input FX 3S -30MR/ES-2AD, FX 3S -30MT/ES-2 AD, FX 3S -30MT/ES S-2AD - Main unit of DC power supply type[...]

[...]

HEAD OFFICE: TOKYO BUILDING, 2 -7-3 MAR UNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN HIMEJI WORKS: 840, CHIYODA MACHI, HIMEJI, JAPAN JY997D48601C (MEE) Effective Oct. 2014 Specifications are subject to change withou t notice. MODEL FX3S-HW-E MODEL CODE 09R535 FX 3S SERIES PROGRAMMABLE CONTROLLERS USER'S MANUAL Hardware Edition[...]