Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 119 Seiten
- 0.74 mb
Zur Seite of
Ähnliche Gebrauchsanleitungen
-
Network Card
Multi-Tech Systems ISI3334/4
232 Seiten 1 mb -
Network Card
Multi-Tech Systems MT3334ZDX
71 Seiten 0.43 mb -
Network Card
Multi-Tech Systems MT5634ZBA-VV.90
48 Seiten 0.51 mb -
Modem
Multi-Tech Systems MT2456SMI22
58 Seiten 0.9 mb -
Network Card
Multi-Tech Systems MT128ISA-UV
42 Seiten 0.44 mb -
IP Phone
Multi-Tech Systems MVP-2410
605 Seiten 5.68 mb -
Laptop
Multi-Tech Systems MTSGSM
81 Seiten 0.62 mb -
Modem
Multi-Tech Systems MT5634ZPX-PCI-V92
85 Seiten 0.66 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Multi-Tech Systems iCell GPRS (MTSMC-G2-IP an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Multi-Tech Systems iCell GPRS (MTSMC-G2-IP, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Multi-Tech Systems iCell GPRS (MTSMC-G2-IP die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Multi-Tech Systems iCell GPRS (MTSMC-G2-IP. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung Multi-Tech Systems iCell GPRS (MTSMC-G2-IP sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Multi-Tech Systems iCell GPRS (MTSMC-G2-IP
- Den Namen des Produzenten und das Produktionsjahr des Geräts Multi-Tech Systems iCell GPRS (MTSMC-G2-IP
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Multi-Tech Systems iCell GPRS (MTSMC-G2-IP
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Multi-Tech Systems iCell GPRS (MTSMC-G2-IP zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Multi-Tech Systems iCell GPRS (MTSMC-G2-IP und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Multi-Tech Systems finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Multi-Tech Systems iCell GPRS (MTSMC-G2-IP zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Multi-Tech Systems iCell GPRS (MTSMC-G2-IP, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Multi-Tech Systems iCell GPRS (MTSMC-G2-IP widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
Univer sal IP AT Commands Referen ce Guide[...]
-
Seite 2
Copyright a nd Techni cal Supp ort Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 2 Universal IP AT Comm ands Refer ence G uide for the following products : SocketM odem iCell GPRS (MT SMC - G2 - IP, MT SMC - G2 - GP) SocketM odem iCell CDMA (MTSMC - C1 - IP, MTSM C - C1 -G P) SocketM odem iCell HSPA (MTSMC- H4 - IP, M[...]
-
Seite 3
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 3 Co ntents Part 1 – ................................................................................................................................................................ 9 AT Comman ds for All Univ ersal IP Dev ices ....................................[...]
-
Seite 4
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 4 #POP3PW – Set PO P3 Pa sswo rd ....................................................................................................... 26 #POP3S ERV – Set POP3 Server A ddress ....................................................................................[...]
-
Seite 5
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 5 #LUD PSTOP – C lose UDP Listening M ode ........................................................................................ 46 #OUTPORT – UDP/TCP L ocal Port N umber ....................................................................................... 4[...]
-
Seite 6
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 6 Display Com m a nds .................................................................................................................................. 60 #IPDN STABL E – Disp lay D NS Ta ble .......................................................................[...]
-
Seite 7
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 7 #ANSW ER MODE – Set Ans weri ng Mod e ........................................................................................... 75 #SMS PHRAS E – Set Inco ming SMS Phrase ...................................................................................... [...]
-
Seite 8
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 8 #GPSG PRMC – Enable/D isable G PRMC M essage ............................................................................ 94 #GPSG PVTG – Enable/Dis able GP VTG Mes sage ............................................................................. 95 #GPSI NTE[...]
-
Seite 9
Part 1 – Commands f or All Uni versal IP Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 9 Part 1 – AT Commands for Al l Univ ersal IP Devi ces Chapter 1 – Gen era l A T Comman ds for the A ll Universal IP Devices Chapter 2 – SMTP A T Command s for A ll Universal IP D evices Chapter 3 – POP3 A T Command s for A l[...]
-
Seite 10
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 10 C hapter 1 – Gener al A T C ommands fo r Al l Univ ers al I P D ev i ce s Set Com man ds AT – Command Mode Descripti on: If the m odem res ponds OK to an [...]
-
Seite 11
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 11 Z – Default Configuration Descripti on: This command r estores the configurat ion prof ile from NVM. Settings are rec alled on p owe r up . Syntax: AT Z Res[...]
-
Seite 12
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 12 &W – Store F actory Defaults to N VM Descripti on: For MT100SEM : S tores f actory defaults to the N VM. For NON - MT100SEM : Stores the c urrent s etti[...]
-
Seite 13
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 13 +IFC – S et Flow Control Descripti on: Tur ns flow contro l on and o ff. Syntax: AT +IFC=<flow control value> Values: 0,0 Flow C ontro l Of f 2,2 Hard[...]
-
Seite 14
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 14 #LEGAC YMODE – Legacy M ode E nable/D is able A bout Legacy Mo de: Note: This comm and is fo r all devices exc ept the S ocketE thernet IP (MT 10 0S EM - IP[...]
-
Seite 15
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 15 #ESCA PECHAR – Configure the E scape C haracter for D LEMODE Descripti on: This par ameter defines the es cape charac ter f or the client s that use an esc [...]
-
Seite 16
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 16 #VSHOWUPT IME – Displays the Current Uptime in Da ys , Hours , Minutes , Sec onds Descripti on: Displa ys the current uptim e of the UI P stack . Note: This[...]
-
Seite 17
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 17 # V AL L – Display A ll Paramet ers Note: The MT100SE M displa y of Poss ible Respons es dif fers slightl y from the MT56 92S MI - IP dis p la y. An exam pl[...]
-
Seite 18
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 18 Syntax: AT # V AL L Possible R esponses – Applies t o All Except M T100SE M - IP #ANSW E RMODE: 0 #CALLBACKTIMER: 2 #CALLSCREENNU M: "0" #DIALN1: [...]
-
Seite 19
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 19 C h a p t e r 2 – S M T P AT Comm and s fo r A l l Univ er sal IP De v ices Set Com man ds #SENDERNA ME – Set Sender Nam e De scrip tion: T he sender’s l iteral nam e (dif ferent f rom the [...]
-
Seite 20
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 20 #DOMAIN – Set Domain N ame of the Send er Descripti on: W hen sending an em ail m essage, the T CP/IP st ack s oftware mus t provide the SMT P server with the dom ain name of the sender . In so[...]
-
Seite 21
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 21 #BODY i – Set Pre - Defined Email Combinations Descripti on: Thes e parameter s store pr e - defined m essage bod ies. T hey allow th e host app lication to send pre - define d email com binati[...]
-
Seite 22
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 22 #SMTPPW – Set SMTP Pa ssword Descripti on: To s end email m essages , some SMT P servers are us ing an au thenticat ion proce ss. In these cases, t he TCP/IP s tack software will pro vide the S[...]
-
Seite 23
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 23 #SENDM A ILi – Se nd Mail without Interactive Mode Important N o te : MT5692 SMI - IP su pports o nly SEND MAIL1 opti ons. Descripti on: This c ommand s ends one of the 3 pre - def ined em ail [...]
-
Seite 24
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 24 # P UT M AI L – Send Mail to Recipient wi th Interacti ve Mode Descripti on: This c ommand allo ws the a ttached hos t to sen d an email m ess age containing b ody text passed to the T CP/IP st[...]
-
Seite 25
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 25 #SMTP A UTH – Authentication ON or OFF Descripti on: Turns authenticati on ON or OFF. Syntax : Set V alue: AT#SMT PAUTH=<v alue> View Value: A T#SMTPA UTH? or A T#VS MTP , AT # V AL L Val[...]
-
Seite 26
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 3 – POP3 AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 26 C h a p t e r 3 – PO P3 AT Comm an ds fo r A l l Univ er sal IP De v ices Set Com man ds #POP3HE ADERMODE – POP3 Head er Descripti on: W hen receiving an email m essage, the T CP/IP s tack can [...]
-
Seite 27
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 3 – POP3 AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 27 #POP3UN – Set POP3 User N ame Descripti on: User nam e for POP3 accou nt. To retrie ve em ail mess ages sent to a sp ecified email addre ss, the TCP/IP s tack s oftware m ust know the POP3 user n[...]
-
Seite 28
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 28 C h a p t e r 4 – F T P AT Com ma nd s fo r A l l Univ er sal IP De v ices Set Com man ds #FTPPORT – Enter FTP Server Port Descripti on: To reac h the FTP s erver, th e TCP/IP stac k sof twar[...]
-
Seite 29
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 29 #FTPSERV – Sp ecify FTP Serv er A ddress Descripti on: FTP s erver address . To connec t to an FT P server to download files, t he TCP/I P stack software must k now the ad dress of the FT P ser[...]
-
Seite 30
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 30 #FTPGET – D own l oad Files from FTP Serv er Descripti on: This c ommand, s ent by the attached h ost, direc ts the T CP/IP stack to connect t o the s pecified FTP s erver and to retr ieve the [...]
-
Seite 31
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 31 #FTPGETP A TH – Set Path to Get a F ile fro m FTP Server Descripti on: In order f or the T CP/IP stac k software to get a f ile f rom the FT P server, the TCP/I P stack software must k now the [...]
-
Seite 32
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 32 Display Command #VFTP – Display FTP Parameter s Descripti on: This c ommand direc ts the T CP/IP stack to displa y all AT # param eters for the FTP client c onfigurat ion. Syntax: A T#VFTP Valu[...]
-
Seite 33
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 33 C h a p t e r 5 – TC P AT Commands fo r A l l Univ er sal IP De v ices Set Com man ds The id par ameter is used for s etting up pr ofiles; Pr ofile 1 a nd Prof ile 2. To v iew param eters includin[...]
-
Seite 34
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 34 #TCPPO RT – Set TCP Port for R e mote Peer Descripti on: To ex change data over TC P, the TCP/IP stack software m ust k now the port of the rem ote peer used for the TCP ses sion. Syntax : AT#TCPP[...]
-
Seite 35
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 35 #TCPP A CKETMIN – TCP Client Transmit Packet Minimum S ize Descripti on: This par ameter determines the minim um pack et size th e TCP Client will trans mit. Note: This comm and is fo r all dev ic[...]
-
Seite 36
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 36 #TCPINACTIVITYTIMER – TCP Client Inactivity Timeout Value Descripti on: This parameter determ ines the inact ivity tim e in second s as to when a sock et connec tion will automat ical l y disconne[...]
-
Seite 37
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 37 #TCPTELNETMODE – E na ble/Disable TCP Client Telnet Proto col Descripti on: Enables or dis a bles the T CP Cl ie nt Telne t protocol. Note: Allows the TCP C lient T elnet to handle a minimal telne[...]
-
Seite 38
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 38 #TCPTELNETUN – Set the TCP Client Te lnet Protocol Us er Na me Descripti on: Configure the TCP Cl ient Telnet prot ocol login u ser name . Note: This comm and is fo r all devices except t he Socke[...]
-
Seite 39
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 39 #LTCPSTOP – C lose TCP Lis tening Mode Descripti on: This c ommand direc ts the T CP/IP stack to close a T CP listen ing m ode (previous ly launc hed b y the AT #LTCPST ART comm and. Syntax: A T#L[...]
-
Seite 40
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 40 Display Command #VTCP – Display TCP Parameters Descripti on: This c ommand direc ts the T CP/IP stack to displa y all the AT # param eters r elated to the T CP socket c onfigurat ion. Syntax: AT#V[...]
-
Seite 41
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 41 C h a p t e r 6 – U D P AT Comm ands fo r A l l Univ er sal IP De v ices Set C ommands #PERSISTEN TSOCK ET - Persist ent S o cket Descripti on: If enabled and the ph ysical connec ti on is pres [...]
-
Seite 42
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 42 #UDPP A CKETM AX – UDP C lient Tr ansmit Packet M aximum Si ze Descripti on: T his param eter determ ines the m aximum packet si ze the UD P Client w ill transm it. N ote: This value c a nnot be[...]
-
Seite 43
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 43 #UDPIGNO RESRCPORT – Ignore Send Source Port Descripti on: Allo ws the UD P client to ignore th e rem ote IP's sourc e port. Note: This comm and is fo r all devices except t he SocketW irel[...]
-
Seite 44
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 44 #UDPSERV – U DP Serv er Ad dress Descripti on: If the UD P sess ion is init iated in list en m ode, use the I P addres s filter. T his m eans that the rem ote must have a define d UDPSERV IP add[...]
-
Seite 45
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 45 #UDPDLEMODE – Set DLE Mode Descripti on: The attached host has th e choic e whether or not to c ode the ET X char acter. Note: This comm and is fo r all devices except t he SocketW ireless W i -[...]
-
Seite 46
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 46 #L UDPSTOP – Close UDP Listening Mode Descripti on: This command dir ects the T CP/IP stack to close a U DP l istening m ode ses sion prev iously launched b y the AT#UDP S T ART comm and. Syntax[...]
-
Seite 47
Part 1 – AT Commands for All U niver sa l IP Device s Chapter 7 – PING AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 47 C h a p t e r 7 – PING AT Comm an ds fo r A l l Univ er sal IP De v ices Set Com man ds General N ote: Du e to var ying factors , PING resp onse tim es ma y not be valid. #PINGNUM – Num be r[...]
-
Seite 48
Part 1 – AT Commands for All U niver sa l IP Device s Chapter 7 – PING AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 48 Display Comman d #VPING – Disp lay PING Param eters Descripti on: D is p l a y P I N G m odule relat ed inform ation . Syntax: AT # V PI N G AT#PIN G? Read or displa y the curr ent sett ing. V[...]
-
Seite 49
Part 2 – AT Commands for the SocketEth ernet IP Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 49 Part 2 – AT Commands for the Sock etE thern et IP Chapter 8 – Gen era l AT Commands for th e SocketE thernet I P (M T100SEM - IP) Chapter 9 – A uto Discover y AT Commands for the S ocke tEthernet IP (MT100SEM - IP)[...]
-
Seite 50
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 8 – General AT Commands for SocketEt hernet I P Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 50 C h a p t e r 8 – G eneral AT Co mm ands f or t he Sock etEther net IP Set Com man ds #DHCP – DHCP On or Off Descripti on: Enables or disabl es the DH CP clie nt. If th[...]
-
Seite 51
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 8 – General AT Commands for SocketEt hernet I P Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 51 #IPNET MA SK – Set S ubnet Mask Descripti on: Sets the s ubnet m ask. Note: The module m ust be reset to put t he comm and into ef fect. Syntax: AT #IPN ETM ASK="<[...]
-
Seite 52
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 8 – General AT Commands for SocketEt hernet I P Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 52 #HOSTNA ME – Configure the DHCP Clie n t Host Nam e Descripti on: Configures t he device host nam e reported t o the DHC P server . Note: This comm and is fo r all device[...]
-
Seite 53
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 8 – General AT Commands for SocketEt hernet I P Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 53 #VIP – Vie w Ad dress Settin gs Descripti on: Displays the a ddress s ettings . Note s: This command displ ays the programmed IP set tings. To see IP setting s in use, in[...]
-
Seite 54
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 9 – Auto Discove ry AT Commands for the S oc ketEt her net IP Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 54 C h a p t e r 9 – Auto D isco ver y AT Command s f or t he Soc k etE t her net IP A Note about A uto Discovery: Auto Discover y will br oadcast inform ation[...]
-
Seite 55
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 9 – Auto Discove ry AT Commands for the S oc ketEt her net IP Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 55 #AUTODISCUSERN AME – Set A uto D iscov er User Name Descripti on: This c ommand s ets the Us er Nam e that will ap pear in the Auto Disc overy Ma nager. Syn[...]
-
Seite 56
Part 3 – AT Comma nds for SocketWireles s Wi - Fi Devic es Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 56 Part 3 – AT Commands for Sock etWi r eles s Wi - Fi D evices Chapter 10 – IP AT Commands for the So cketWir eless Wi - Fi Chapter 11 – Gener al AT Comman ds for t he SocketWi reless Wi - Fi Chapter 1 2 – Telnet AT[...]
-
Seite 57
Part 3 – AT Comma nds for Wi - Fi Device s Chapter 1 0 – IP AT Command s for the So cket W ir eless W i - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 57 C h a p t e r 1 0 – I P AT Comm an ds f or t he SocketW ireless W i - Fi Set Com man ds #DHCP – DHCP O n or O ff Descripti on: Enables or disabl es the DH CP client [...]
-
Seite 58
Part 3 – AT Comma nds for Wi - Fi Device s Chapter 1 0 – IP AT Command s for the So cket W ir eless W i - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 58 #IPNET MA SK – Set Subn et M ask Descripti on: Set s th e subnet m ask . Note: The module m ust be reset to put t he comm and into ef fect. Syntax: AT #I PNETM ASK=&qu[...]
-
Seite 59
Part 3 – AT Comma nds for Wi - Fi Device s Chapter 1 0 – IP AT Command s for the So cket W ir eless W i - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 59 #IPRELEA SE – Release a DHCP Addr ess A ssigned by the Server Descripti on: In order to gracefu lly releas e a DHC P address as signe d by the ser ver, the m odule s h[...]
-
Seite 60
Part 3 – AT Comma nds for Wi - Fi Device s Chapter 1 0 – IP AT Command s for the So cket W ir eless W i - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 60 Display Command s #IPDNST ABLE – Display DNS Table Descripti on: This command d is pla ys the DNS t able co ntaining t he list of queried Hos t nam es, correspond ing [...]
-
Seite 61
Part 3 – AT Commands for W i - Fi Dev ices Chapt er 11 – Ge neral AT Commands fo r the Soc ket W irel ess Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 61 C h a p t e r 1 1 – G eneral AT Comm and s f or t he S ocketW irel ess W i - Fi Set Com m ands A – Manual Answer of TCP or UDP Connection Descripti on: Manual a[...]
-
Seite 62
Part 3 – AT Commands for W i - Fi Dev ices Chapt er 11 – Ge neral AT Commands fo r the Soc ket W irel ess Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 62 #BOOTMSG – Enable/Disable Boot Message Descripti on: Enables /dis a bles the boot m essage. Syntax : AT#BOOTMSG =<0,1 > AT#BO OT MSG? Read or d ispla y the [...]
-
Seite 63
Part 3 – AT Commands for W i - Fi Dev ices Chapt er 1 2 – Tel net AT C ommands f or the So cket W irele ss Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 63 C h a p t e r 1 2 – Te l n e t AT Comm and s f or t he S ocketW irel ess W i - Fi a nd t he SocketEt her net IP NOT E: The Tel net command s are used b y the Soc[...]
-
Seite 64
Part 3 – AT Commands for W i - Fi Dev ices Chapt er 1 2 – Tel net AT C ommands f or the So cket W irele ss Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 64 #TELNETPA SSWORD – Set Telnet Pass word Descripti on: Sets T elnet pass word. Note: The m odule must be reset to put the com mand into ef fect. Syntax : AT# T EL[...]
-
Seite 65
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 65 C h a p t e r 1 3 – W L AN AT Comm ands fo r t he S ocketW irel ess W i - Fi Set Com man ds #WL A NSECURITY MODE – Securit y Mode of WL AN M odule Descripti on: Sets th[...]
-
Seite 66
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 66 #WL A NSC ANMODE – Scanning Mode Descripti on: S ets sc anning m ode. The m odule can work in both activ e scanning and pas sive scanni ng modes . In active scanning, the[...]
-
Seite 67
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 67 #WL A NCONNECT – Connect with A P Descripti on: Connec ts the m odul e with AP. Syntax: AT#WLANCONNECT Value s : None Example: AT#W LANCONNECT SSID : W estConfRoom RSSI :[...]
-
Seite 68
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 68 #WL A NPROFILEn= n – Cha nge the WLAN Profile Descripti on: This command c hanges the W LANPRO FILE. Syntax: AT#WL ANSET PROF ILEn=n , " <SSID > " ,<Se[...]
-
Seite 69
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 69 #WLANU SEPROFILE – User Profile Descripti on: Set s and displ ay s the use pr ofile value. If u se r profile value is set to an y value bet ween 1 a nd 4, then at the tim[...]
-
Seite 70
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 70 #WEP128K EY – Key s for WEP 128 Se curity Mode Descripti on: Sets k eys for W EP128 Secur ity mode. Note: The module m ust be reset to put t he comm and into ef fect . Sy[...]
-
Seite 71
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 71 Display Command s #W EP? – See the V alue of the W EP K e ys Descripti on: This command dis plays the values of the W EP ke y s. Syntax: AT#W EP? Value s : W EP64KEY1: &q[...]
-
Seite 72
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 72 # W L AN ? – WLAN Module Descripti on: Displa ys W LAN m odule - related inf or m ation. Syntax: AT # WL AN? Value s : SECUR ITYMO DE SSID NETW ORKMODE IBSSCH ANNEL COUNT[...]
-
Seite 73
Par t 4 – AT Comma nds for t he SocketM odem i Cell, SocketM odem IP, MultiM odem iCell Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 73 Part 4 – AT Commands for the Sock e tModem iCell, SocketModem IP, MultiModem iCell Chapter 14– AT C om m a nds for the Following Devices : SocketModem iCell SocketModem IP (when i n IP mod[...]
-
Seite 74
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 74 C h a p t e r 1 4 – AT Comm and s f or the Sock etModem iC el l, Sock etModem I P , Mult iModem i Cell These commands are for the following products Sock etModem iCe ll (MT S[...]
-
Seite 75
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 75 #ANSWERMODE – Set Ans w ering Mode Descripti on: The TCP/IP s tack c an handle inc oming cal ls. This par am eter defines ho w the TC P/IP stack will behave when rece iving a[...]
-
Seite 76
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 76 #CALLBACKTIMER – Set Aut omatic Call - Back Wait Descripti on: This param eter defines the num ber of s econds the T CP/IP stack will wait before a n autom atic call - b ack [...]
-
Seite 77
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 77 #KEEPA LIVEPORT – K eep -A li ve Port Number Descripti on: If the keep - alive s ession is T CP, then keep al ive port controls t he rem ote host por t num ber. Syntax: AT#KE[...]
-
Seite 78
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 78 # AT C M D – Customize D ial - Up Commands Descripti on: This c ommand allo ws the u ser to cus tomize AT commands o n dial up. Syntax : AT # ATCMD=id," Valid A T comman[...]
-
Seite 79
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 79 #RINGCOUNT – S et Number of Rings/Automatic Ope ration Descripti on: T his param eter defines the num ber of rings that will be counted bef ore an a utom atic operat ion occu[...]
-
Seite 80
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 80 #DIAL SELECT – Set Internet Connection Number Descripti on: The value of this c omm and determ ines the num ber c alled to est ablish an In ternet connecti on. It configures [...]
-
Seite 81
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 81 Incom ing Call M anag eme nt Com ma nds #ACCEPT – A nswe r Incoming Call Descripti on: This c ommand direc ts the T CP/IP stack to ans wer an incom ing cal l. When t he TCP /[...]
-
Seite 82
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 82 #CONNECTIO NSTART – Start Communication Descripti on: This c ommand direc ts the T CP/IP stack to originat e an out going call . Upon rec eiving this comm and, the TC P/IP st[...]
-
Seite 83
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 83 #AUTOCONNECT – Automaticall y Connect the PP P Link Descripti on: #AUTOCONNECT enables/ disables t he autom atic link connection. The A PN or ISP v alues ne ed to be set c or[...]
-
Seite 84
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 84 #PPPSERVUN – Set U ser Name f or Remo te PPP C lient Descripti on: W hen the TCP/IP s tack behav es as a PPP server (acc ording to the PPPMOD E param eter), it checks the rem[...]
-
Seite 85
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 85 #GPRSCI D – Set PDP Contex t Identifi e r Descripti on: #GPR SCID is the PD P context id entifier which spec ifies a par ticular PD P contex t definit ion. This param eter is[...]
-
Seite 86
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 86 #VPPP – Di splay PPP Paramet ers Descripti on: This c ommand direc ts the T CP/IP stack to displa y all the AT # param eters r elated to the P PP layer conf iguration. Values[...]
-
Seite 87
Part 5 – GPIO AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 87 Part 5 – GPIO AT Comm ands Chapter 15 – GPIO AT Commands[...]
-
Seite 88
Part 5 – GPIO AT C ommands Chapter 1 5 – G PIO AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 88 Chap t e r 1 5 – GPIO AT Com ma nds About GP IO If the spec ific hard ware allo ws GPIO (check availab ilit y with AT #GPIO= 1), then you ma y spec ify certai n external events f rom the GPIO s to trigg er specif ic s[...]
-
Seite 89
Part 5 – GPIO AT C ommands Chapter 1 5 – G PIO AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 89 Hangup: Determ ines whether to disc onnect from the netw ork af ter GPIOs ha ve been proc essed. Values: 0 - Physical con nection will disc onnect when all GPIO s ha ve been proc essed 1 - Ph ys ica l connecti on will s[...]
-
Seite 90
Part 5 – GPIO AT C ommands Chapter 1 5 – G PIO AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 90 #GPIOTRIGGER – Co nfigure the GPIO pin and trigger type Descripti on: Co nfigure the GPIO pin and trigger type. Syntax: AT #G PI O T RIGGE R= < param ete r1> , < par ame ter2> Values: par ameter 1 (GPI O p[...]
-
Seite 91
Part 6 – AT Comma nds for GP S - Enabled D evices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 91 Part 6 – AT Comm ands fo r GPS - Enabl ed Devi ce Chapter 16 – Commands for GPS - Enabled Dev ice[...]
-
Seite 92
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 92 C h a p t e r 1 6 – AT Command s f or GPS - Enable P roducts #GPSSERV – Set GP S Host S erver Add ress Descripti on: This c ommand s ets the server I P addres s or nam e[...]
-
Seite 93
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 93 #GPSURA IS – Set GPS Unique Rem ote A sset Identification String Descripti on: This c ommand is used to set a unique r emote ac cess ident ification s tring for each devic[...]
-
Seite 94
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 94 #GPSGPGLL – Enabl e/Disabl e GPGLL Message Descripti on: This c ommand enab les or dis ables the r eporti ng of N MEA GPG LL mes sages. Syntax : AT#G PSG PGLL = <value [...]
-
Seite 95
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 95 #GPSGPVTG – Enabl e/Disabl e GPVTG M essage Descripti on: This c ommand enab les or dis ables the r eporting of NME A GPVT G mess ages. Syntax : AT#G PSG PVTG= <value&g[...]
-
Seite 96
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 96 GPS Me ssage Sy ntax GPS mess age synt ax that is s ent from the UIP dev ice to t he backend server: <GPSPR EFIX> <GPSUR AIS> <NME A_MESS AGE> <CR> &[...]
-
Seite 97
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 97 GPS Configu r ation Exam ple s AT#G PSPREFIX ="&& "<CR > Prefix (Requirem ents prov ided b y backend s e rvice ) AT#G PSURAI S="ID1 111"<[...]
-
Seite 98
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 98 Applic ation N ote – GPS N MEA M essag es Introduction The NME A (Nation al Marin e Electron ics Assoc iation) 0183 Standar d is a standar d protoco l for interfacin g nav[...]
-
Seite 99
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 99 SUPPORTED M ESSAGE LIST The f ollowing NME A messages are supp orted. Sentence Descripti ons GGA Global Pos itionin g System Fix Data GLL Geographic Posit io n – Lat itude[...]
-
Seite 100
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 100 GL L – Latitude/Longitude Latitude an d longit ude of c urrent pos ition, tim e, and st atus. Structur e: $GPGLL,ddm m .mmmm,a,dddm m.mmmm ,a,hhmm ss.sss,A,a*h h<CR>[...]
-
Seite 101
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 101 GSV – GNSS Satel lites in Vi ew Num ber of satellit es (SV) in view, satel lite ID num bers , elevation, a zimuth, a nd SNR value. Four satellites max imum per t ransmiss[...]
-
Seite 102
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 102 RMC – Recomme nded Minimum Specific GNSS Data Tim e, date, posit ion, course an d speed d ata prov ided b y a GNSS nav igation rec eiver. Structur e: $GPRMC,hhm m ss.sss,[...]
-
Seite 103
Part 7 – Appendix es Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 103 Part 7 – Appendixes A ppendi x A – Resp onse Mes sages and Err or Cod es A ppendi x B – Respon se Messag e Examp les[...]
-
Seite 104
Part 7 – Appendix es Appendix A – Response M essages and Error Cod es Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 104 Appen dix A – Respo nse M ess ages & Er ror Cod es Res ponse Mess ages Standar d A T M essages Numeric Verbo se Descripti on 0 OK Operation or comm and succ ess 3 NO CARRIER No ph ysical layer c onnect[...]
-
Seite 105
Part 7 – Appendix es Appendix A – Response M essages and Error Cod es Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 105 Error Codes Error C odes Numeric Descripti on 34817 Bad comm and : Unk nown com mand 34819 Bad comm and : S yntax e rr or 34824 Bad comm and : EE PROM write f ailed 34881 Bad comm and : Comm and to o long 34[...]
-
Seite 106
Part 7 – Appendix es Appendix B – Response M essage Ex amples Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 106 Appendix B – Respo nse M ess age Ex amp les Respo nse Me ssage s Exam ples Sending/Ret rieving E mail Resp onse Me ssages Sending a n Email: AT#PUTM A IL Commands Response s AT#SMT PSERV="s mtp.dom ain.com &q[...]
-
Seite 107
Part 7 – Appendix es Appendix B – Response M essage Ex amples Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 107 Retrie ving an Em ail: A T#GETM AIL Commands Response s AT#POP3 SERV="pop 3.do main.com " Note: POP 3 server used OK AT#POP3U N="m odule@dom ain.com " Note: POP 3 usernam e (not al ways the com p[...]
-
Seite 108
Part 7 – Appendix es Appendix B – Response M essage Ex amples Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 108 FTP: Downloa d / Upload Files Res ponse Messages Upload a fi le to an FTP Server: A T#FTPPUT Commands Response s AT#FT PSERV="ftp. domain .com " Note: FT P server us ed OK AT#FT PUN="ftplogi n" N[...]
-
Seite 109
Part 7 – Appendix es Appendix B – Response M essage Ex amples Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 109 TCP Sock et Respo nse Mess ages Open a T CP sock et between m achines . One mac hine acts as a caller (T CP client) ; the oth er acts as a listener ( TCP ser ver). Both m achines have to be connec ted to the I ntern[...]
-
Seite 110
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 110 I n d ex # #ACCEPT – Answer Incoming Call ................................... 81 #ANSW ERMO DE – Set Answering M ode ........................ 75 #APNPW – Access Point N ame Password ....................... 84 #APNSERV – Access Poi nt Name ............................[...]
-
Seite 111
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 111 #POP3PW – Set POP3 Password .................................... 26 #POP3SERV – Set POP3 Server Address ....................... 26 #POP3UN – Set POP3 User Name .................................. 27 #PPPMODE – TCP/ IP Behavior ....................................... 83[...]
-
Seite 112
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 112 Authentic ation ON or OFF – # SM TP AUTH ....................... 25 Authentic ation Ty pe – #AUTHENT ................................... 74 Auto Connect Module w i th AP – #WLANENABLE ............ 67 Auto Discov ery On or O ff – #AUTODISC .......................... 54[...]
-
Seite 113
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 113 #TCPPACKETMAX – TCP Client T ransmit P acket Ma xim u m S i ze .......................................................... 35 #TCPPACKETMIN – TCP Client T ransmit Pa cket M inimum Size ........................................................................... 35 #TCPPORT [...]
-
Seite 114
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 114 #TCP NETW ORKTIMER – TCP Client Networ k Transmit Safety T imeout Value ................................................ 36 #TCPPACKETMAX – TCP Client T ransmit P acket Ma xim u m S i ze .......................................................... 35 #TCPPACKETMIN – TCP C[...]
-
Seite 115
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 115 #PUTMAIL – Send M ail to Recipie nt with Int eractiv e Mode .................................................................................. 24 #RECiADD – Set Email Addr ess ...................................... 20 #REDIALCOUNT – Connection Att empts All owed .......[...]
-
Seite 116
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 116 #LUDPSTART – Initia te the U DP S ession in Listen Mode ........................................................................ 45 #LUDPSTOP – Close UDP Li stening Mod e ................... 46 #OTCP – Open a TCP Connection ................................ . 39 #OUDP ?[...]
-
Seite 117
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 117 #IPRELEASE – Release a DH CP Addres s Assigned by the Server ....................................................................... 59 #IPRENEW – Renew DHCP Informatio n from Serv er ...... 59 #IPRESOLV – Is There a C onnect ion with DNS or Not .... 59 #LEGACYMODE – [...]
-
Seite 118
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 118 Display C urrent Stat e of Phys ical Conne ction – #V STATE ...................................................................................... 16 Display D NS Table – #IPDNS TABLE ............................... 60 Display E mail Paramet ers for M ail ID – #VMAILi .[...]
-
Seite 119
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 119 Retrieve H ost M ail – #G ETMA IL ....................................... 27 RLSD (DCD) Optio n – &C ................................................. 11 R MC – Recommended Minim um Specific G NSS Dat a ... 102 S S0= – Automati c Answer ...........................[...]