-
Seite 1
User ’ s Manual E553 E463 E423 E323[...]
-
Seite 2
English-1 www .necdisplaysolutions.com Index Precautions And Reminders ���������������������������������������������������������������� English-1 Important Safety Instructions ���������������?[...]
-
Seite 3
English-1 English Precautions And Reminders Do not place the display in conned spaces or in a box when in use� Maintain ample ventilation for the display when in use� Do not open the display cabinet� Call a NEC certied service personnel for any internal service needed for your display � Keep the display away from direct sunlight, dust[...]
-
Seite 4
English-3 English-2 Important Safety Instructions Read before operating equipment Follow all warnings and instructions marked on this display � 1� Read these instructions� 2� Keep these instructions� 3� Heed all warnings� 4� Follow all instructions� 5� Do not use this apparatus near water � 6� Clean only with dry cloth� 7?[...]
-
Seite 5
English-3 English-2 English 15� The display complies with the recommended safety standards for stability � Do not put excessive force on the front or top of the cabinet� This could cause the product to tip over and cause damage and/or personal injury � 16� If monitor or glass is broken, do not come in contact with the liquid crystal and h[...]
-
Seite 6
English-5 English-4 Power source This LCD display operates on 120 volts 60 Hz, AC current� Insert the power cord into a 120 volts 60 Hz outlet� The mains plug is used as the disconnect device and shall remain readily operable� T o prevent electric shock from the display , do not use with an extension cord, receptacle, or other outlet unless t[...]
-
Seite 7
English-5 English-4 English Safety Instructions FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class II digital device, pursuant to part 15 of the FCC Rules� These limits are designed to provide reasonable protection against harmful interference in a residential installation� This equipment generates, u[...]
-
Seite 8
English-7 English-6 Important Information W ARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE� ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSERTED� REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSI[...]
-
Seite 9
English-7 English-6 English Batteries installed warning Caution - Danger of explosion if batteries are incorrectly replaced� Replace only with the same or equivalent type� The batteries shall not be exposed to excessive heat such as sunshine, re or the like. CAUTION: These servicing instructions are for use by qualied service personnel on[...]
-
Seite 10
English-9 English-8 Installed with stand 4 inches 10 cm 4 inches 10 cm Leave at least this space around the set. 1 1 7/8 inches 30 cm 4 inches 10 cm Never install the display set where air-circulation is blocked� Objects and ventilation holes Never push objects of any kind into the display through the cabinet slots as they may touch dangerous vol[...]
-
Seite 11
English-9 English-8 English Declaration Of Conformity This device complies with Part 15 of FCC Rules� Operation is subject to the following two conditions� (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation� U.S. Responsible P[...]
-
Seite 12
English-1 1 English-10 3� following procedures: • Reorient or relocate the receiving display � • Increase the separation between the equipment and display � • Connect the equipment into a different outlet than the receiver � • Consult your dealer or an experienced radio/display technician for assistance� If necessary , the user sh[...]
-
Seite 13
English-1 1 English-10 English Preparation IMPORT ANT : Do not apply pressure to the screen display area which may compromise the integrity of the display � The manufacturer ’ s warranty does not cover user abuse or improper installations� Attaching the Base E553/E463/E423 E323 1� Place the display face down on a soft and at surface to p[...]
-
Seite 14
English-13 English-12 Preparing Y our LCD Display For W all Mounting(optional) We suggest that you keep your display at least 2�36 inches (60 mm) from the wall to prevent cable interference� Before mounting your display on the wall, you need to remove the base� For your safety , only mount with a UL listed wall mount bracket that supports the[...]
-
Seite 15
English-13 English-12 English Place The Display On A Solid Surface Ensure that the LCD display is placed in a position to allow free ow of air . Do not cover the ventilation openings on the back cover � Do not place the display near any open ames. Do not allow the display to be placed in an environment where it can be exposed to heat, direc[...]
-
Seite 16
English-15 English-14 Battery Installation and Replacement The remote control is powered by two 1�5V AAA batteries� T o install or replace batteries: 1� Open the battery cover of the remote control by pushing and pulling it in the direction of the arrow � 2� Insert two new “AAA” size batteries for the remote control� When replacing [...]
-
Seite 17
English-15 English-14 English Connect T o The Power Source The display should be installed close to an easily accessible power outlet� Fully insert the prongs into the power outlet socket� A loose connection may cause image degradation� If there is power to the display , the front LED at the bottom of the display will be either blue or red�[...]
-
Seite 18
English-17 English-16 Source Connection Guide ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ AC POWER 1� SPDIF - Use a digital audio cable to connectstereo home theater system� 2� COMPONENT/A V IN – Connect digital video equipment to the Video Green (Y), Blue (Pb), Red (Pr) jacks, and matching Audio White (L) and Red (R) jacks� 3� ANTENNA/DTV/TV – C[...]
-
Seite 19
English-17 English-16 English RS-232C Port Specifications PC control of the Display Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections� Note: This operation system should be used by a person who is accustomed to using computers� Communication conditions Set the RS-232C communication[...]
-
Seite 20
English-19 English-18 Operating Instructions Using The Side Panel Controls 1� MENU Press to open or exit the OSD (On-Screen Display) menu� 2� INPUT Press to select the input source� 3� VOL + Press to increase the volume� Press this key to shift Right in the OSD menu� 4� VOL - Press to decrease the volume� Press this key to shift L[...]
-
Seite 21
English-19 English-18 English Using The Remote Control Power Press to turn On/Off (standby) the power � (Note: T o completely turn off the power , unplug the AC cord from the power outlet�) TV Press to choose A TSC/NTSC tuner source mode� AV Press to choose Composite source mode� COMP Press to choose Component source mode� HDMI/PC Press r[...]
-
Seite 22
English-21 English-20 Color buttons Follow the on-screen instruction to operate� MTS Press to activate the NTSC tuner sounds such as Stereo, SAP , Mono- tone, and languages of the digital tuner � Wide Press to choose the display aspect ratio: Normal/Zoom/Wide/Cinema/ Auto (Ratio availability varies by video inputs� Refer to the Picture Format[...]
-
Seite 23
English-21 English-20 English Navigating The On-Screen Menu Press the Menu button to display and Exit to close the main menu� Use the Navigation Ring to navigate, select, adjust or conrm an item on the OSD (On Screen Display) menu� Note: Some features may only be available in a particular source mode� Video Menu This menu adjusts video ite[...]
-
Seite 24
English-23 English-22 Audio Menu The Audio menu provides an audio adjustment for user to modify the audio setting� EXIT OK MENU Video Audio Channels Setup Photos Sound Mode Adjust settings to affect sound quality . Standard Balance 0 Advanced Audio Reset Audio Settings MOVE SELECT RETURN EXIT 1� Sound Mode Select preset audio modes� The optio[...]
-
Seite 25
English-23 English-22 English 7� Auto Aspect Automatically adjust the picture aspect ratio according to the TV program� Setup Menu The Setup menu in TV mode is shown below � According to various requirements in different source modes, certain features could be hidden (disabled) on the menu� EXIT OK MENU Video Audio Channels Setup Photos Men[...]
-
Seite 26
English-25 English-24 5� Input Labels-- only for Non TV input Create labels for the devices connected to your display � 6� RGB Options Only available for VGA input, and when there is VGA signal input� [Auto Adjust] Automatically adjusts the image settings such as position� [H-Position] Adjusts horizontal position� [V -Position] Adjusts [...]
-
Seite 27
English-25 English-24 English T o control while in full-screen photo show: • Press RIGHT to go to the next image� Press LEFT to go to the previous image� • Press OK to rotate the image clockwise� When press enter to rotate the photo, the rotation situation will change to Zoom Fill style� • Press W ide to zoom the image� The zoom fun[...]
-
Seite 28
English-27 English-26 T ips Care Of The Screen Do not rub or strike the screen with anything hard as this may scratch, mar , or even damage the screen permanently � Unplug the power cord before cleaning the screen� Dust the display by wiping the screen and the cabinet with a soft, clean cloth� If the screen requires additional cleaning, use a[...]
-
Seite 29
English-27 English-26 English Product Specification This model complies with the specications listed below . Reorient or relocate the receiving display � Designs and specications are subject to change without notice. This model may not be compatible with features and/or specications that may be added in the future� Model Name E323 E423[...]
-
Seite 30
English-29 English-28 Model Name E323 E423 E463 E553 W ALL MOUNTING VESA-compatible wall bracket (W x H) 200 x 100 mm 400 x 400 mm 400 x 400 mm 400 x 400 mm Screw type Metric 4 x 18 mm Metric 6 x 18 mm Metric 6 x 18 mm Metric 6 x 18 mm PO WER Power Consumption 51 W 81 W 107 W 135 W Standby < 1 W Power AC 120V , 60Hz AUDIO PO WER Power Consumptio[...]
-
Seite 31
English-29 English-28 English Before Calling Service Please make these simple checks before calling service� These tips may save you time and money as charges for receiver installation and adjustments of customer controls are not covered under your warranty � Symptoms Items T o Check And Actions T o Follow “Ghost ” or double image when usin[...]
-
Seite 32
English-31 English-30 Glossary HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines� HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs are located on the rear of the receiver � These connectors are used for the input of audio and video signals� Designed to r[...]
-
Seite 33
English-31 English-30 English Limited W arranty NEC Display Solutions of America, Inc� (hereinafter “NEC DISPLA Y SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below , agrees to repair or replace (at NEC DISPLA Y SOLUTIONS’ sole option) any part of the enclosed[...]
-
Seite 34
English-32 English-32 References NEC Monitor Customer Service & Support Customer Service and T echnical Support Parts and Accessories (800) 632-4662 (888) 634-4662 Fax (800) 695-3044 W arranty Information www �necdisplay �com Online T echnical Support www �necdisplay �com Sales and Product Information Sales information Line (888) 632-64[...]