NEC MD213MC Bedienungsanleitung

MD2 1 2 M C MD2 13MC MD2 13MG INST ALL A TION & MAINTENANCE GUIDE[...]

Index W arning, Caution ............................................................................................................... ......... English-1 Registration Information ....................................................................................................... ....... English-2 Recommended use ...............................[...]

English-1 English W ARNING CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM W ALL SOCKET . TO FULL Y DISENGAGE THE POWER T O THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET . DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SER VICING T O QUALIFIED SERVICE PERSONNEL. TO PREVE[...]

English-2 Registration Information Declaration of the Manufacturer Means of Conformity Device Classification: Class I, non-measuring function Applicable Rules: Annex IX, Rules 1.4 (Section 1) and 1.1 (Section 3) Product Name: MD212MC/MD213MC 21.3" Diagnostic Imaging Color LCD Monitor MD213MG 21.3" Diagnostic Imaging Grayscale LCD Monitor [...]

English-3 English Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONIT OR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing[...]

English-4 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONIT OR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Y our eyes should look slightly downward [...]

English-5 English Contents Y our new NEC monitor box* should contain the following: • MD212MC/MD213MC/MD213MG monitor with tilt/swivel/pivot/height adjust stand • Power Cord •V ideo Signal Cable (DVI-D to DVI-D cable)* 1 • Quick Reference Guide • CD-ROM x 2 • Cable Cover Power Cord (T ype of power cord included will depend on the where [...]

English-6 Figure C.1 Quick Start To attach the LCD monitor to your system, follow these instructions: NOTE: Make sure to read “Recommended Use” before installation. In order to display the maximum resolution, a display controller is required which can output a resolution of 1200 x 1600 (in portrait mode) or 1600 x 1200 (in landscape mode) for M[...]

English-7 English Figure C.3 Figure D.1 Figure D.2 Figure C.4 8. Hold all cables firmly and place the cable cover onto the stand ( Figure D.1 ). T o remove the cable cover , lift the cover off as shown in Figure D.2 . 9. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet. NOTE: Please [...]

English-8 T ilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired ( Figure TS.1 ). Figure TS.1 Swivel Grasp both sides of the monitor screen with your hands and adjust the swivel as desired ( Figure TS.2 ). NOTE: Handle with care when tilting the monitor screen. Figure TS.2 Screen Rotation Before rotating, the sc[...]

English-9 English Mount Flexible arm 1. Change the 4 screws that were removed from the stand removal to attach the flexible arm to the monitor ( Figure F .1 ). Caution: • When mounting, use ONL Y the screws (4 pcs) that were removed from the stand to avoid damage to the monitor or stand. • The monitor should only be used with an approved arm (e[...]

English-10 Controls The OSD (On-Screen Display) control buttons are located on the back of the monitor: To access OSD menu, press the EXIT button. T o change signal input, press the SELECT button. NOTE: OSD must be closed in order to change signal input. SETTING OSD LANGUAGE • Set the OSD language before using OSD functions. •T o access the “[...]

English-11 English Luminance/Contrast Controls LUMINANCE Adjusts the overall image and background screen luminance. When LUMINANCE is adjusting the numerical values blinks. AUTO CONTRAST (Analog input only) Adjusts the image displayed for non-standard video inputs. BLACK LEVEL (Analog input only) Adjust the black level manually . Auto Adjust (Analo[...]

English-12 EXP ANSION Sets the zoom method. FULL: The image is expanded to 1200 x 1600 (in portrait mode) or 1600 x 1200 (in landscape mode) for MD212MC and 1536 x 2048 (in portrait mode) or 2048 x 1536 (in landscape mode) for MD213MC/MD213MG, regardless of the resolution. ASPECT : The image is expanded without changing the aspect ratio. OFF: The i[...]

English-13 English OFF MODE This function allows the monitor to enter into a power saving mode after a period of inactivity . The OFF MODE has two settings. OFF: Monitor does not go into power save mode when the input signal is lost. ST ANDARD: Monitor enters power save mode automatically when the input signal is lost. UNIFORMITY This function elec[...]

English-14 F ACTOR Y PRESET Selecting Factory Preset allows you to reset all OSD control settings (LUMINANCE, BLACK LEVEL, IMAGE CONTROL, COLOR CONTROL SYSTEM, SHARPNESS, OFF MODE, OSD LEFT/RIGHT , OSD UP/DOWN, OSD TURN OFF) back to the factory settings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET[...]

English-15 English T ag1 Luminance Adjusts the overall image and screen background luminance. Press “Left” or “Right” to adjust. When LUMINANCE is adjusting, a numerical value blinks. Auto Contrast Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust. (Analog input only) Any adjustment requires the image t[...]

English-16 T ag3 Auto Adjust Automatically adjusts the Image Position and V .Size (H.Size) settings and Fine settings. (Analog input only) Press “SELECT” to activate Auto Adjustment. Signal Adjust Determines when the auto adjustment is activated automatically . (Analog input only) The choices are “SIMPLE” and “FULL”. Press “Left” or[...]

English-17 English H.ZOOM The image is expanded from 1 to 3 times in the horizontal (H. EXP ANSION) direction by (Available in Custom 0.01 increments. Expansion mode only) V .ZOOM The image is expanded from 1 to 3 times in the vertical (V . EXP ANSION) direction by (Available in Custom 0.01 increments. Expansion mode only) ZOOM POS. Sets the point [...]

English-18 T ag7 Sharpness This is a digital capability for keeping a crisp image at all signal timings. It continuously adjusts to maintain as distinct or as soft an image as you prefer and is set independently according to different timings. Press “Left” or “Right” to adjust. DVI Selection This function selects the DVI input mode. When th[...]

English-19 English OSD Lock Out This control completely locks out access to all OSD control functions. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the OSD controls are locked out. There are three types of OSD LOCK OUT : OSD LOCK OUT with no control: T o activate the OSD Lock Out function, pre[...]

English-20 Input Setting Video Band Width: Reduce the visual “noise” level of the input signal. (Analog input only) The video band width settings range from 0-7, with 0 having no correction and 7 having the most noise correction. Press “Left” or “Right” to select. Sync Threshold: Adjusts the slice level of a synchronization signal. Pres[...]

English-21 English Calibration Before proper calibration can be performed, display should warm-up for a minimum of 30 minutes. If trying to start calibration before the monitor is warmed-up, a warning will appear on the screen (Figure 1) . Figure A 2. Select SELF in the Mode selection ( Figure 3 ). 3. Select the target UNIFORMITY and UNIFORMITY LEV[...]

English-22 6. Press SELECT to start the calibration. Front sensor calibration may take several minutes depending on user setting. 7. After the CALIBRA TION SUCCEEDED message appears ( Figure 6 ), press SELECT . T o end the calibration mode, press “EXIT”. Figure 6 Copy Calibration 1. T o show the CALIBRA TION menu, plug-in the USB sensor to the [...]

English-23 English 5. Press SELECT on Display B to start reading the white point* and luminance information of Display A. 6. After copying the Display A information, the target luminance and target chromaticity coordinates will be stored and displayed in the OSD of Display B. The target value is not adjustable ( Figure 1 1 ). 7. Remove USB sensor f[...]

English-24 DICOM Measurement 1. T o show the CALIBRA TION menu, select the CALIBRA TION in the advanced menu (page 20). 2. Select DICOM MEASURE in the Mode selection ( Figure 17 ). 3. Select the Color setting in COLOR* 2 selection and Gamma setting in GAMMA selection. *2 MD213MG does not have COLOR selection. 4. Press SELECT to start the DICOM MEAS[...]

English-25 English Specifications - MD212MC Monitor Specifications MD212MC Monitor Notes LCD Module Diagonal: 54.0 cm/21.3 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 54.0 cm/21.3 inches liquid crystal display (LCD); UA - SFT (IPS); Native Resolution (Pixel Count): 1200 x 1600 (Portrait) 0.27 mm dot pitch; 850 cd/m 2 max [...]

English-26 Specifications - MD213MC Monitor Specifications MD213MC Monitor Notes LCD Module Diagonal: 54.0 cm/21.3 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 54.0 cm/21.3 inches liquid crystal display (LCD); UA - SFT (IPS); Native Resolution (Pixel Count): 1536 x 2048 (Portrait) 0.212 mm dot pitch; 800 cd/m 2 max 2048 x [...]

English-27 English Specifications - MD213MG Monitor Specifications MD213MG Monitor Notes LCD Module Diagonal: 54.0 cm/21.3 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 54.0 cm/21.3 inches liquid crystal display (LCD); SA - SFT (IPS); Native Resolution (Pixel Count): 1536 x 2048 (Portrait) 0.212 mm dot pitch; 1450 cd/m 2 ma[...]

English-28 Features DVI-I: The integrated interface ratified by the Digital Display W orking Group (DDWG) that allows both digital and analog connectors off of one port. The “I” stands for integration for both digital and analog, The digital portion is DVI-based. DVI-D: The digital-only subset of DVI ratified by the Digital Display Working Grou[...]

English-29 English T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or[...]

English-30 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. W e are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standar[...]