NEC MultiSync LCD19WV Bedienungsanleitung

LCD19WV LCD22WV User ’ s Manual[...]

English English-1 Declaration Declaration of the Manufacturer TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPON[...]

English-2 For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canad[...]

English English-3 Contents Y our new NEC LCD monitor box* should contain the following: • LCD monitor with tilt base • Power Cord •V ideo Signal Cable • User ’s Manual • CD-ROM • Base Stand • Cable Holder Quick Start To attach the Base to the LCD Stand: 1. Insert the front of the LCD stand into the holes in the front of the Base ( F[...]

English-4 3. Connect one end of the power cord to the monitor and the other end to the power outlet. Use the Cable holder to keep the V ideo Signal Cable and power cord together ( Figure B.1 ). 4. T o attach the Cable Holder: Attach the Cable Holder on to the Base. Insert the hooks on the Cable Holder into the holes at the back of the Stand and sli[...]

English English-5 Figure R.1 Non-abrasive surface Figure R.2 Removing the Base NOTE: Always remove the Base when shipping the LCD. 1. Place monitor face down on a non-abrasive surface ( Figure R.1 ). 2. While using your thumbs, press the bottom tabs upward to unlock. 3. Pull the unlocked base off the stand. Connecting a Flexible Arm This LCD monito[...]

English-6 Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic Key function Button OSD Off OSD ON (Icon selection stage) OSD ON (Adjustment stage) OSD Lock 2. OSD Lock function To lock the OSD, press and hold the MENU button while the monitor is of f and then press power button to turn the monit[...]

English English-7 Luminance Contrast Contrast from Digital-register . Brightness Backlight Adjustment. Image Setup Focus Adjusts Picture Phase to reduce Horizontal-Line noise. Clock Adjusts picture Clock to reduce V ertical-Line noise. Image Position H. Position Adjusts the horizontal position of the picture. V. Position Adjusts the vertical positi[...]

English-8 OSD Locked When the OSD is unlocked, keep holding down “Menu” key and press “Power” key once to turn on the monitor , the OSD will be locked and show this message. When the OSD is locked, only Power key function is still working, if user presses any other key it will also show this message. When the OSD is locked, Keep holding dow[...]

English English-9 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOUR MONIT OR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicin[...]

English-10 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Y our eyes should look slightly downward [...]

English English-11 Specifications - LCD19WV Monitor Specifications LCD19WV Monitor Notes LCD Module Diagonal: 48.1 cm/19 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 48.1 cm/19 inches liquid crystal display (LCD); 0.285 mm dot Native Resolution (Pixel Count): 1440 x 900 pitch; 300 cd/m 2 white luminance, 1000:1 contrast ra[...]

English-12 Specifications - LCD22WV Monitor Specifications LCD22WV Monitor Notes LCD Module Diagonal: 54.9 cm/21.6 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 54.9 cm/21.6 inches liquid crystal display (LCD); 0.277 mm dot Native Resolution (Pixel Count): 1680 x 1050 pitch; 300 cd/m 2 white luminance, 1000:1 contrast ratio[...]

English English-13 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The small footprint and low weight allow it to be moved or transported easily from one location to another . No-touch Auto Adjust: No-touch Auto Adjust automatically adjusts the monitor t[...]

English-14 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check front power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display car[...]

English English-15 TCO’03 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus tha[...]

English-16 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. W e are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standar[...]