Deutsch dropdown-ico

NEC ND-70895 (E) Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106

Zur Seite of

Ähnliche Gebrauchsanleitungen

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung NEC ND-70895 (E) an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von NEC ND-70895 (E), sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung NEC ND-70895 (E) die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung NEC ND-70895 (E). Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung NEC ND-70895 (E) sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts NEC ND-70895 (E)
- Den Namen des Produzenten und das Produktionsjahr des Geräts NEC ND-70895 (E)
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts NEC ND-70895 (E)
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von NEC ND-70895 (E) zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von NEC ND-70895 (E) und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service NEC finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von NEC ND-70895 (E) zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts NEC ND-70895 (E), über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von NEC ND-70895 (E) widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    SEPTEMBER, 2000 NEC America, Inc. ND-70895 (E) ISSUE 1 STOCK # 200876 OAI Syst em Manual ®[...]

  • Seite 2

    LIABILITY DISCLAIMER NEC America, I nc. reserves t he right to change th e specificati ons, functions, or features, at any time, wit hout no tice. NEC America, Inc. ha s prepared this document for use by its employees and customers. The informati on contained herein i s the propert y of NEC America, Inc. and shall not be reproduced wi thout prior w[...]

  • Seite 3

    ISSUE 1 ISSUE 2 ISS UE 3 ISS U E 4 D A TE SEPTEMBER, 2000 D A TE D A TE D A TE ISSUE 5 ISSUE 6 ISS UE 7 ISS U E 8 DA T E DA TE DA T E DA T E NEAX240 0 IMX OAI System Manual Issue Re vision Sheet 1/2 ND-70895 (E) ISSUE 1 PA G E N o . Issue No . 12345678 i 1 ii 1 iii 1 iv 1 v 1 vi 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 1 12 1 13 1 14 1 15 1 16[...]

  • Seite 4

    ISSUE 1 ISSUE 2 ISS UE 3 ISS U E 4 D A TE SEPTEMBER, 2000 D A TE D A TE D A TE ISSUE 5 ISSUE 6 ISS UE 7 ISS U E 8 DA T E DA TE DA T E DA T E NEAX240 0 IMX OAI System Manual Issue Re vision Sheet 2/2 ND-70895 (E) ISSUE 1 71 1 72 1 73 1 74 1 75 1 76 1 77 1 78 1 79 1 80 1 81 1 82 1 83 1 84 1 85 1 86 1 87 1 88 1 89 1 90 1 91 1 92 1 93 1 94 1 95 1 96 1 [...]

  • Seite 5

    ND-70895 (E ) ISSUE 1 SEPTE MBER, 2000 NEAX2400 IMX O AI Syst em Man ual T ABLE OF CONTENTS Pag e ND-70895 (E) T ABLE OF CONTENTS Pag e i Revision 1.0 CHAPTER 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. General . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 6

    T ABLE OF CONTENTS ND-70895 (E) Pa g e i i Revision 1.0 T ABLE OF CONTENTS (CONTINUED) Pag e AADT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 ACNO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 7

    ND-70895 (E) T ABLE OF CONTENTS P age iii Re vis ion 1.0 T ABLE OF CONTENTS (CONTINUED) Pag e CHAPTER 6 MAIN TENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 8

    LIST OF FIGURES Figure Title Pa g e ND-70895 (E ) LIST O F FI GURES Pag e i v Re vis ion 1.0 Figure 2-1 Software Structure in the OAI Sys tem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Figure 2-2 Concept of MSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 9

    LIST OF T ABLES T able Title Pa g e ND-70895 (E ) LIST OF T ABLES Pag e v Revision 1.0 Table 1-1 Configur ation of This Manu al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table 1-2 Related Ref erence Manu al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 10

    LIST OF T ABLES ND-70895 (E ) Pa g e v i Revision 1.0 This page is for yo ur notes.[...]

  • Seite 11

    ND-70895 (E) CHAPTER 1 Page 1 Revision 1. 0 CHAPTER 1 INTR ODUCTION 1. General This manual descr ibes the o utlin e, instal lation pr ocedur e/insta llation tests, and vario us phase s of mainte nance work of an OAI (Open Appl ication Interf ace) syste m which realiz es the NEAX2400 IMX and a compu ter syste m. 2. How to Foll ow the Manual 2.1 Conf[...]

  • Seite 12

    CHAPTER 1 ND-70895 (E) Page 2 Revision 1. 0 INTR ODUCTION How to Fo llow the Manual 2.2 Rela te d Reference Manual The in stallat ion tasks for th e NEAX2400 IMX OAI Sys tem consis t of th ose relat ed to the NEAX24 00 IMX system a nd tho se relat ed to t he OAI f unctions . Since t his manual desc ribes t he tasks perta ining t o the OAI functi on[...]

  • Seite 13

    ND-70895 (E) CHAPTER 2 Page 3 Revision 1. 0 CHAPTER 2 SYSTE M OUTLINE 1. General This chapte r describes the con cep t, functi ons , and confi gur ati on of the NEAX2 400 IMX OAI System. Before pe rforming i nstall ation and/or maintenanc e of t he NEAX2400 IMX OAI System, read this cha pter care fully. The contents of Chapter 2 are outlined be low[...]

  • Seite 14

    CHAPTER 2 ND-70895 (E) Page 4 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine 2. System Outline 2.1 O AI (Open Applica tion Interface) System 1. The O AI system is the in terf ace th at joins a va riety of faciliti es o f the NEAX 2400 IMX to t he app li cati on programs of the ex ternal c omputer (general -purpo se informa tion proces sing equipme n[...]

  • Seite 15

    ND-70895 (E) CHAPTER 2 Page 5 Revision 1. 0 SYSTEM OUTLINE System Outli ne Figu re 2- 1 Sof twa re St ruct ure in th e OAI System Inpu t Proc essing Block Digit Coun t Key Rece iving Other I Off-Hook/ On-Hook Monit or Other I Queue Internal Proc essin g Block Digit Analysis Queue Key Analysis Trunk Selectio n Subscrib er Class Identific ation Switc[...]

  • Seite 16

    CHAPTER 2 ND-70895 (E) Page 6 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine 2.2.1 Facilities Each of t he unit function s of the NEAX2400 IMX, such as switch con trol fun ction, termina l contro l function, etc., that can be controlled by the application of the computer is referred to as “facility”. The faci lit ies ca n be cat e goriz ed in tw[...]

  • Seite 17

    ND-70895 (E) CHAPTER 2 Page 7 Revision 1. 0 SYSTEM OUTLINE System Outli ne (b) Ter m i nal Multi p le Infor mation Transf er Faci lity (T MF ) This facilit y execute s batc h transfe r of d ial nu mber inf ormati on entere d from a t ermina l, card informat ion provide d from the card reader, et c. to the AP. ( Figur e 2-3 ) Figure 2-3 Concept of T[...]

  • Seite 18

    CHAPTER 2 ND-70895 (E) Page 8 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine (d) Authorizat ion Code Fa cil ity (A CF) Upon accep ting a connect ion reque st and/ or a servic e request from a t ermina l, this f acil ity tran sfers the ID c ode of tha t sp ec ific term in al to the A P and al so execu te s either connec ti on pr o cessing or connecti[...]

  • Seite 19

    ND-70895 (E) CHAPTER 2 Page 9 Revision 1. 0 SYSTEM OUTLINE System Outli ne 2. Performe r F acilitie s (a) T er minal C ontro l F acility (TCF) This f acil ity cont rols the LCD, LED, etc . on a termina l concern ed as p er a cont rol or der pr o vided by the AP . It als o acti v ates the KTF , NTF , and CRF upon re cei ving a data read r equest pro[...]

  • Seite 20

    CHAPTER 2 ND-70895 (E) Page 1 0 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine (c) D ial Numb er Transfer Facility (NTF) When a te rm inal con c erned is o n the term in al mode , this faci lity tr an sfers th e diale d number infor mation fr om tha t specific te rm inal to th e AP . ( Fig ure 2- 9 ) Figure 2-9 Concept of NTF (d) Swit ch Con t r ol [...]

  • Seite 21

    ND-70895 (E) CHAPTER 2 Page 11 Revision 1. 0 SYSTEM OUTLINE System Outli ne (e) Res tricti on Contro l F acili ty (RCF) This fa cility change s the restrict ion class of a termin al concerned in acc ordance with a direc tiv e gi ven by th e AP . The restric tion clas s changing can be made on th e basis of each t erminal, e ach group, or each syste[...]

  • Seite 22

    CHAPTER 2 ND-70895 (E) Page 1 2 Revision 1. 0 SYSTEM OUTLINE Syste m Outl ine (g) Applicatio n Languag e Transfer Facil ity (A TF) With a di rectio n recei ve d from the AP o r a spec if ic key de pres se d on a te rm i nal, t his fa ci lity s en d s out the A PL i nform ation input from an OA I term inal to the AP. ( Figur e 2-13 ) The syste m doe[...]

  • Seite 23

    ND-70895 (E) CHAPTER 2 Page 13 Revision 1. 0 SYSTEM OUTLINE System Outli ne 2.2.2 Join of Facilities and Applic ation 1. When a f aci lity of the NEAX2400 IMX is c ontrol led by the Appl icat ion Prog ram ( AP) on th e U AP computer , the AP and that f acilit y must be conn ected fi rst. The fo llo w i ng is the procedu re of thi s connecti on. (a)[...]

  • Seite 24

    CHAPTER 2 ND-70895 (E) Page 1 4 Revision 1. 0 SYSTEM OUTLINE System Conf igu ratio n 3. System Configuration The OAI System can be implemented in the Built-in Type configuration, with which the IP is bu ilt in the CPU of t he NEAX2400 IMX. The c onfigu ration of the NEAX 2400 IM X OAI Sy st em is a s follow s. IP External C omputer Interfac e Circu[...]

  • Seite 25

    ND-70895 (E) CHAPTER 2 Page 15 Revision 1. 0 SYSTEM OUTLINE System Conf igu ratio n 1. The conf igur ation of the NEAX2400 IMX O AI Syst em is as foll o ws. Figure 2-14 IP Single S ystem C onfi gu rat ion Sing le Sy st em Con fig ur ation of NEA X 2400 IMX IMG SYMBOL SYMBOL NA ME CIRCUIT CARD NAME REMARKS CPU Central Processing Unit ( NEAX2400 IMX [...]

  • Seite 26

    CHAPTER 2 ND-70895 (E) Page 1 6 Revision 1. 0 SYSTEM OUTLINE System Conf igu ratio n Figure 2-15 IP Dual System Config u ration Dual System Conf igur at ion of NEAX2400 IMX IMG SYMBOL SYMBOL N AME CIRCUIT CARD NAME REMARKS CPU Central Process ing Unit (NEAX2400 IMX) CPR RAM: Built in Data Memory ELC D term Line C ircuit P A-16ELCJ D term Di gital M[...]

  • Seite 27

    ND-70895 (E) CHAPTER 2 Page 17 Revision 1. 0 SYSTEM OUTLINE Interface with Exter na l Computer 4. Interface with Exter nal Computer 4.1 Conditions f or Interface with External Computer The ci rcuit car d for interfac e with the exte rnal com puter (ge neral-pu rpose info rmation p rocessin g equip- ment) , and th e interf ace con ditio ns are sho w[...]

  • Seite 28

    CHAPTER 2 ND-70895 (E) Page 1 8 Revision 1. 0 This page is for yo ur notes.[...]

  • Seite 29

    ND-70895 (E) CHAPTER 3 Page 19 Revision 1. 0 CHAPTER 3 INST ALLA TION PRO CEDURE 1. General This chapte r explains the ins tal l ation procedu re for OAI System of NEAX2 400 IMX. • Cable Conne ctions with Exte rnal Computer • O AI So ftwa re In stall ation • Upgrading O AI System f rom NEAX2400 ICS to NEAX2400 IMX[...]

  • Seite 30

    CHAPTER 3 ND-70895 (E) Page 2 0 Revision 1. 0 INST ALLA TION PROCEDURE Cable C onnections with Ex ternal C omputer 2. Cable Connections with Ext ernal Comput er This section e xplains c able conne ctions betwee n the NEAX240 0 IMX OAI Sys tem and the ext ernal computer . 2.1 Cable Connections be tween O AI System and Ext ernal Com puter The cable c[...]

  • Seite 31

    ND-70895 (E) CHAPTER 3 Page 21 Revision 1. 0 INST ALLA TION PROCEDURE OAI S oftware Instal lation 3. O AI Sof tware Install ati on This sect ion ex plains th e inst allatio n procedur e for ad ding th e OAI softwar e to the PBX in off-l ine operat ion. For m ore deta iled info rmatio n of pr ogram instal l proced ure befo re the OA I appli catio n [...]

  • Seite 32

    CHAPTER 3 ND-70895 (E) Page 2 2 Revision 1. 0 INST ALLA TION PROCEDURE OAI Softwar e Installati on STEP 6: Assig n the system da ta wri tten in LDM. ASYDL SYS1 INDEX512: FPC of the s elf-node When OAI system is used throug h the Fusio n Network, this d ata settin g is n ecessary at each nod e in the network . INDEX513: 01 Hex (LDM usage) INDEX515~5[...]

  • Seite 33

    ND-70895 (E) CHAPTER 3 Page 23 Revision 1. 0 INST ALLA TION PROCEDURE Upgradi ng OAI Syste m from NE AX 240 0 ICS to NEAX2 400 IMX 4. Upgrading O AI System fr om NEAX2400 ICS to NEAX2400 IMX The proce dure for u pgrading OAI System NEAX240 0 ICS to NEAX24 00 IMX is shown b elow. 4.1 Up Gradin g Pr ocedure STEP 1: Sto p the opera tion of the ex te r[...]

  • Seite 34

    CHAPTER 3 ND-70895 (E) Page 2 4 Revision 1. 0 This page is for yo ur notes.[...]

  • Seite 35

    ND-70895 (E) CHAPTER 4 Page 25 Revision 1. 0 CHAPTER 4 COMMANDS 1. General This chapt er exp lains the commands that a re used in t he NEAX2400 IMX OAI Sys tem. The co ntents of t his Chapter a re outlined bel ow. • Conf igur at ion of Commands for O AI Syst em This secti on e xpla ins the constru ctio n of each command. • Commands This section[...]

  • Seite 36

    CHAPTER 4 ND-70895 (E) Page 2 6 Revision 1. 0 COMMANDS Configuratio n of Comman ds f or OAI System 2. Configuration of Commands for OAI System 2.1 Confi guration of C o mmands The conf igur ation of the comman ds in use in the NEAX2400 IMX OAI System is sh own in Figure 4-1 . Figure 4-1 Configuratio n of Commands of the NEAX2400 IMX OAI System Comm[...]

  • Seite 37

    ND-70895 (E) CHAPTER 4 Page 27 Revision 1. 0 COMMANDS Commands 3. Commands This section e xplains t he commands in used in th e OAI Syst em. 3.1 List of Commands T able 4-1 sho ws a l ist of co mmands i n us e i n t he O AI system. As for an y co mma nd ot her th an t hos e i n the list, r efer to the Featur e Programmin g Manual a nd Of f ice Dat [...]

  • Seite 38

    CHAPTER 4 ND-70895 (E) Page 2 8 Revision 1. 0 COMMANDS Commands 3.2 Outli ne o f Comman ds for O AI Sy stem The i nterr elation among the commands t o be used in t he OA I System is illu strated in Figure 4 -2 . Figure 4-2 Interrelation among O AI System Commands AKYD : This comman d is used to assign t he fu nction k e y codes (F or O AI: 34 ~ 47 [...]

  • Seite 39

    ND-70895 (E) CHAPTER 4 Page 29 Revision 1. 0 COMMANDS AADT AADT: Assignment of Announcement/Dictation T runks 1. Function s This command is used to ass ig n/del ete Announce men t T runks or Dictat i on T runks. 2. Precaut ion When chang ing t he LENS of the cur rently assig ned Ann ouncement /Dictation T runks, delete the assigne d data f irst by [...]

  • Seite 40

    CHAPTER 4 ND-70895 (E) Page 3 0 Revision 1. 0 COMMANDS AADT Announcement /Dictat ion T r unk Data Assign ment T able Disconnec t T imer 0 = I mpossibl e 1 = Possible TR UNK TYPE (TYPE) ANT/DCT MESSA GE NO . (NO) MESSA GE TIMER (MSGT) 2 ~ 120 DISCON- NECT TIMER (D) 0/1 CONNEC- TION P A TTERN (CP) 0/1 WA I T I N G TIMER (W AIT) 0 ~ 30 ANT/DCT ASSIGNE[...]

  • Seite 41

    ND-70895 (E) CHAPTER 4 Page 31 Revision 1. 0 COMMANDS A CNO ACNO: Assignment of Con ver sion Number Data 5. Function s This co mmand is used to assign/d elete the con vers ion n umber requi red for s electin g a rout e on a each r oute basis. 6. Precaut ion (a) The data should b e assigned t o ring-d own trunks. (b) As a co nvers ion numb er, a mon[...]

  • Seite 42

    CHAPTER 4 ND-70895 (E) Page 3 2 Revision 1. 0 COMMANDS AC N O Con versio n Number Dat a Assignment T able Note: Max. 6 digits when using in a hotel system EXTERNAL ROUTE NUMBER (RT) TENANT NUMBER OF MONIT ORED NUMBER (TN) MONIT ORED NUMBER (MNO) MAX. 5 DIGITS (Note)[...]

  • Seite 43

    ND-70895 (E) CHAPTER 4 Page 33 Revision 1. 0 COMMANDS AKYD AKYD: Assignment of Ke y Data f or D term 9. Function s This command is used to as sign/del ete/dis play the fu nction ke y data, multi -line dat a or interc om data corres ponding to each k ey on such mul ti-func tion tele phone t erminal as D term Series E. 10. Prec aution For the details[...]

  • Seite 44

    CHAPTER 4 ND-70895 (E) Page 3 4 Revision 1. 0 COMMANDS AMNO AMNO: Assignment o f Mo nitored Number 12. Fun ctio ns This command is used to ass ig n/del ete Monit ored Numbers . 13. Prec aution Monitored Number (MON) is a numbe r of maximum 5 digits consisting of 0 ~ 9, “*” and “#”. Note that , in the case of a hotel system, UCD Pil ot Numbe[...]

  • Seite 45

    ND-70895 (E) CHAPTER 4 Page 35 Revision 1. 0 COMMANDS AMNO Monitored Number Assign ment T able Note 1: Max. 6 digits when using in a hotel system Note 2: Data to be ent ered fo r a hotel s ystem Going by UCD whe n monito red statu s is not requested from AP :0/1 = Not Going By UCD/Going By UCD. TENANT NUMBER (TN) MONIT ORED NUMBER (MNO) MAX. 5 DIGI[...]

  • Seite 46

    CHAPTER 4 ND-70895 (E) Page 3 6 Revision 1. 0 COMMANDS AOA C AOAC: Assignment of O AI Acce ss Code 16. Fun ctio ns This command i s used t o assi gn/del ete t he F acil ity Ki nd and th e Operat ion Code on a b asis o f each s ervic e acces s co de of the OAI Syst em. 17. Prec aution (a) When set ting a minus v al ue (less t han 0) to the para mete[...]

  • Seite 47

    ND-70895 (E) CHAPTER 4 Page 37 Revision 1. 0 COMMANDS AOA C O AI Acc ess Code Data Ass ignment T able Note: The number o f digi ts fo r O AI Acces s Codes is to be se t by A OKC command. O AI ACCESS CODE (MAX 3 DIGITS) (O AI-A CC) F A CILITY KIND (1/2) (F-KIND) OPERA TION CODE 128 ~ 255 (OP-CODE)[...]

  • Seite 48

    CHAPTER 4 ND-70895 (E) Page 3 8 Revision 1. 0 COMMANDS AO K C AOKC: Assignment of O AI Ke y Code 20. Fun ctio ns This comman d is used to assi gn/delet e the F acility Ki nd and the Operat ion Code on a basis of each functi on key on th e D term . 21. Prec aution (a) The O AI code f or whic h F-KIND = 3 (Open Appl ication Int erfa ce) ca n be as si[...]

  • Seite 49

    ND-70895 (E) CHAPTER 4 Page 39 Revision 1. 0 COMMANDS AO K C Note 1: The r elationsh ip betwee n this p ar ameter and the AKYD co mmand p aramet er FKY = 34 ~ 47 is shown belo w . Note 2: Enter th is par ameter onl y when F-KIND = 3. Note 3: This parameter can be ente red o n ly when F-KIND = 1, 2. The range of the values that can be ent ered is a [...]

  • Seite 50

    CHAPTER 4 ND-70895 (E) Page 4 0 Revision 1. 0 COMMANDS AO K C O AI K ey Code Data Assign ment T a ble Note 1: This par ameter is to be enter ed only when F-KIND = 3. Note 2: This par ameter is to be enter ed only when F-KIND = 1, 2. Note 3: The KEY -CODE for whic h F-KIND = 3 can be a ssigne d is onl y one per s ystem. Note 4: When delet ing a K ey[...]

  • Seite 51

    ND-70895 (E) CHAPTER 4 Page 41 Revision 1. 0 COMMANDS AO K C T able of Operatio n Codes OPERA TION CODE REMARKS 128 (0 080): MS F 191 (0 0BF): MSF OA I (T erminal Mode Set Facility) 192 (0 0C0): TMF 255 (0 0FF): TMF OA I (T erminal Multi ple Information T ransfer Facility)[...]

  • Seite 52

    CHAPTER 4 ND-70895 (E) Page 4 2 Revision 1. 0 COMMANDS ASP A ASPA: Assignment of Specific Access Code 24. Fun ctio ns This comma nd is used t o assign/d elete /displa y each da ta which res pecti v ely de termin es what kind o f servic e should be ex ecut ed and/or whi ch route sh ould be used, et c. when a sp ecial acc ess code, C.O. line access c[...]

  • Seite 53

    ND-70895 (E) CHAPTER 4 Page 43 Revision 1. 0 COMMANDS ASYD ASYD: Assignment of System Data 27. Fun ctio ns This command is used to ass ig n Syste m Data 1, 2, and 3. 28. Prec aution For the de tails of th e syste m data, re fer to the d escript ion of ASYD co mmand in the Off ice Da ta Specif ica tion for the NEAX2400 IMX.[...]

  • Seite 54

    CHAPTER 4 ND-70895 (E) Page 4 4 Revision 1. 0 COMMANDS ASYD System Data Assign T able (1) The Offic e Data Sheet s of this ASYD co mmand are pr ovided onl y for the da ta to be assigned in the OAI System. Use these Offic e Data Sheet s tog ether with those for ASYD comman d of the NEAX2400 IMX. SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0[...]

  • Seite 55

    ND-70895 (E) CHAPTER 4 Page 45 Revision 1. 0 COMMANDS ASYD Syst em D ata As sign T ab le (1) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 25 5 DA T A (D A T A) 00– FF (Hex) BIT CORRE- SPONDING D A T A SYSTEM D A T A CONTENTS DA T A 0/1 BIT 1 31 04 0b 0 Equipp ed capacity of t he Common Memory (CM): 1 ~ 4 Mbyte Assign “6” Hex. wh[...]

  • Seite 56

    CHAPTER 4 ND-70895 (E) Page 4 6 Revision 1. 0 COMMANDS ASYD 1 70 b 0 Calle d Number Dis play when fo rwardi ng to Attendant Console 0/1 : Out/In service b 1 Flashi ng disp lay of Line Locko ut on A tten dan t Console BLF 0/1 : In s ervice/Out b 2 Route No. Di splay o n Attendan t Co nsole b 3 0b 4 One digit dialing instead of SHF (DP TEL only) 0/1 [...]

  • Seite 57

    ND-70895 (E) CHAPTER 4 Page 47 Revision 1. 0 COMMANDS ASYD Note 1: When the bit is s et to “0” the bottom line displ ay of the Message W ai ting Enhance Display Servi ce becomes in valid. Note 2: If, a t an of f ice in service wi th this bi t set to “1” (No O AI Servic e is Pr ovide d), the bit val ue is to be chang ed to “0” (O AI Serv[...]

  • Seite 58

    CHAPTER 4 ND-70895 (E) Page 4 8 Revision 1. 0 COMMANDS ASYD Syst em D at a Ass ign T able (1 ) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 255 DA T A (D A T A) 00– FF (Hex) BIT CORRE- SPONDING D A T A SYSTEM D A T A CONTENTS DA T A 0/1 BIT 18 0 0b 0 Not used b 1 Message Reminder Service-Ke y u sed for Message Deletion (D term ) 0/1[...]

  • Seite 59

    ND-70895 (E) CHAPTER 4 Page 49 Revision 1. 0 COMMANDS ASYD System Data As sign T able (1) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 255 DA T A (D A T A) 00– F F (Hex) BIT CORRE- SPONDING D A T A SYSTEM D A T A CONTENTS DA T A 0/1 BIT 1 207 b 0 No. 0 CPU Mounte d Status of IP0 0/ 1:N ot moun t ed/ Moun t e d b 1 No. 1 CPU Mounte d[...]

  • Seite 60

    CHAPTER 4 ND-70895 (E) Page 5 0 Revision 1. 0 COMMANDS ASYD Note: This ti mer data i s e xclus ively fo r the funct ion fo r batc h tr ansfer (TMF) of O AI dial number f r om a single- line t elephone s et. Ther e for e, this t imer dat a is in valid for TMF f r om a D term . 1 241 b 0 Data Port Chime Control by SC F 0/1: T o be controlled/Not to b[...]

  • Seite 61

    ND-70895 (E) CHAPTER 4 Page 51 Revision 1. 0 COMMANDS ASYD System Data Assign Table ( 1) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 25 5 DA T A (D A T A) 00– FF (Hex) BIT CORRE- SPONDING D A T A SYSTEM D A T A CONTENTS DA T A 0/1 BIT 449 b 0 SCF Call origin ation from the first party notification 0/1 = Inef fecti ve/Ef fectiv e b [...]

  • Seite 62

    CHAPTER 4 ND-70895 (E) Page 5 2 Revision 1. 0 COMMANDS ASYD System Data Assign T able (3) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 25 5 DA T A (D A T A) 00– FF (Hex) BIT CORRE- SPONDING D A T A SYSTEM D A T A CONTENTS DA T A 0/1 BIT 31 5 b 0 Designation of the initial mode of the card reader 000: PB S ender 100 001: LP C ommand [...]

  • Seite 63

    ND-70895 (E) CHAPTER 4 Page 53 Revision 1. 0 COMMANDS DFLN DFL N: Disp la y of Loca ti on F ree Number ing 29. Fun ctio ns This comman d is used to check the assigne d data of Locat ion Free Numbering Servic e. When t his comm and is ac ti vated, the assig n ed data a r e disp layed on a basis of each desi gnated st ation nu m ber. 30. Prec aution [...]

  • Seite 64

    CHAPTER 4 ND-70895 (E) Page 5 4 Revision 1. 0 COMMANDS ASYD N ASYDN: Assignment of System Data in NDM 33. Fu nction This command is used to ass ig n syst em data 1 and 2. 34. Prec aution s 1. This section only expla ins abo ut ASYDN command for OAI system. 2. For more de tails o f ASYDN command, se e the “Of fice Data Specif icat ion.” 35. P ar[...]

  • Seite 65

    ND-70895 (E) CHAPTER 4 Page 55 Revision 1. 0 COMMANDS ASYDN Note 1: When the al l Fusion nodes in the net work ar e used for “MUL TI PLE IPs”, t his data may be assi gned using ASYDN. Note 2: A vailabl e since the Se ries 7400 (Relea se 8) s oftwar e. SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 1535 DA T A (D A T A) 00 – FF (He[...]

  • Seite 66

    CHAPTER 4 ND-70895 (E) Page 5 6 Revision 1. 0 COMMANDS ASYD L ASYDL: Assignment of System Data into Local DM (LDM) 36. Fu nction This command is used to assig n and change sys tem data for O AI acti vate d via FCCS. 37. Prec aution s ASYDL command is c omprised wit h System Dat a-1, INDEX 512-1 535. This sec tion o nly explains abo ut ASYDL comman [...]

  • Seite 67

    ND-70895 (E) CHAPTER 4 Page 57 Revision 1. 0 COMMANDS ASYD L SYSTEM DA T A TYPE (SYS) SYST EM DA T A INDEX (INDEX) 512-1535 DA T A (D A T A) 00 – FF (Hex) BIT CORRESPONDING DA T A SYSTEM D A T A CONTENT S DA T A 0/1 BIT 1 512 b 0 Fusion Point Code (FPC) of self node in he xadeci mal. FPC 1- 253 (01 He x-F D He x) Note: After assig ning/c ha nging[...]

  • Seite 68

    CHAPTER 4 ND-70895 (E) Page 5 8 Revision 1. 0 COMMANDS ASYD L 1 523 Default Gatew ay Address of External LAN Gate w ay Address (IP add ress of Router) of Netwo rk connecti ng PBX. Note: This data is valid when the PBX is connected to the e xternal PC LA N. In the case of no Network Gateway , assignment da ta is 00 He x. in Inde x 5 23 thr ough 526.[...]

  • Seite 69

    ND-70895 (E) CHAPTER 5 Page 59 Revision 1. 0 CHAPTER 5 OFFICE D A T A DESIGN 1. General This chapt er explai ns the proced ure for sett ing the offic e data requi red in the NEAX2400 IMX OAI Syst em. As for th e of fice da ta sett ing p rocedu re of the N EAX24 00 IM X Syst em its elf, re fer to the S ystem Data Design Manual. The descrip tion of t[...]

  • Seite 70

    CHAPTER 5 ND-70895 (E) Page 6 0 Revision 1. 0 OFFICE D A T A DESIGN Proced ure for Setting Basic Offic e Data for O AI Sys tem 2. Procedure f or Setting Basic Offi ce Data f or O AI System The proce dure f or setti ng the off ice data for OAI syst em is expl ained in the fol lowing. 2.1 Data for O AI System 1. ASYD/ASYDL ASYD-SYS1 INDEX31 - b0 ~ 3 [...]

  • Seite 71

    ND-70895 (E) CHAPTER 5 Page 61 Revision 1. 0 OFFICE D A T A DESIGN Proce dure f or Setti ng Basic Offi ce Data f or O AI System 2.2 Data for O AI T ermin al In the ca se of D term 1. ASDT (In the c ase of Busine ss; Stati on Data ), AASP (In t he ca se of Hote l sys tem; St atio n Data) Note 1 Assign st atio n data V oice Port: TEC12 Data Po rt : T[...]

  • Seite 72

    CHAPTER 5 ND-70895 (E) Page 6 2 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3. Procedure f or Setting Office Dat a f or O AI Services This sec tion e xplains t he outli ne, using c ondition s, and of fice dat a setti ng procedu re of the main OAI s ervice functi ons. 3.1 Switch Control F acility (SCF) [...]

  • Seite 73

    ND-70895 (E) CHAPTER 5 Page 63 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.1.2 Using Conditions 1. Normal and abnormal operat ing sequ ences perta ining to the basi c connecti on of the SCF are as descri bed bel ow . [Normal Se quence] (a) Upon rec ei ving SCF sta rt request fr om the AP , the NEA[...]

  • Seite 74

    CHAPTER 5 ND-70895 (E) Page 6 4 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices [Abnormal Seque nce ] (a) Upon re cei vin g SCF start reques t from the AP , the NEAX2400 IMX judge s the status ( idle, b usy , makebusy , e tc.) of th e de signa te d call in g termi nal an d desti na tion termina l. (b) If t[...]

  • Seite 75

    ND-70895 (E) CHAPTER 5 Page 65 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.1.3 Data Programming Assignment 1. ASYD (System Data) SYS1 IN DE X 7 9 b6: 0 (O AI serv ice is av ailable) 2. AKYD (D term Key D a t a ) Restric t a call or iginati on from the prime line of the termina l of whic h answer t[...]

  • Seite 76

    CHAPTER 5 ND-70895 (E) Page 6 6 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.2 Call ID Notific ation (SMFN for ISDN) 3.2.1 Functional Outline This Ca ll I D No ti f ica tion f unct i on is an enh anc ement of bot h t he Ca ll T ermination No ti f i cat io n and th e Answer Noti f i ca ti on among Ca l[...]

  • Seite 77

    ND-70895 (E) CHAPTER 5 Page 67 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 4. Wh en an incom ing cal l termin ates from ISDN net work, ISD N caller ’ s numbe r infor mation (subscr iber’ s number and sub-addr ess) is prov ided fr om the cent ral of fice i n the follo wi ng format. Subscr iber nu[...]

  • Seite 78

    CHAPTER 5 ND-70895 (E) Page 6 8 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.3 MWL Contr ol (SSF) S TEP-1 3.3.1 Functional Outline This func tion all o ws the Appl ication Program ( AP) to pro vide a si ngle-li ne tel ephone equi pped with Messag e W aiting La mp (MWL) or a D term with t he foll o win[...]

  • Seite 79

    ND-70895 (E) CHAPTER 5 Page 69 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.3.2 Using Conditions 1. Normal and abnormal operatin g sequences pertain ing to th e basic connectio n of the SSFR are as descri bed bel ow . [Normal Se quence] [Abnormal Seque nce ] T erm inal (D term ) N EAX2 400 IMX Comp[...]

  • Seite 80

    CHAPTER 5 ND-70895 (E) Page 7 0 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 2. This servi ce cannot be used si multaneousl y with other MW control se rvices (VMM/MCI: Message Center Interf ace/Mes sa ge W aiting from Station, A TTCON and MA T). 3. The co ndi tions for th e telepho ne that co ntrol s MW[...]

  • Seite 81

    ND-70895 (E) CHAPTER 5 Page 71 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.3.3 Data Programming Assignment 1. ASYD (System Data) SYS1 IN DE X 7 7 b2: 0 (MW La m p Refr es h Cont rol is in serv ic e ) IN DE X 1 7 9 b6: 0 (OAI se rvice s are p rovided ) 2. ARPC (Remote Point Code for Centrali zed Se[...]

  • Seite 82

    CHAPTER 5 ND-70895 (E) Page 7 2 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.4 TCP/ IP Address (Assignment f rom M AT) 3.4.1 Functional Outline In an OAI syst em t o be co nnec te d with th e ho st c o mputer vi a the Ethern e t , this fu nc tion allows use of TCP/IP port with the sel f intern et addr[...]

  • Seite 83

    ND-70895 (E) CHAPTER 5 Page 73 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.4.3 Data Programming TCP/IP Address Assi gnment 1. Assignment ASYD L (Sys te m Data (L DM)) Assign TCP/ IP address SYS1 INDEX 515 ~ 518 2. De letion ASYD L (Sys te m Data (L DM)) Dele te TCP/IP a d dress SYS1 INDEX 515 ~ 51[...]

  • Seite 84

    CHAPTER 5 ND-70895 (E) Page 7 4 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.5 Name Disp lay 3.5.1 Functional Outline This servi ce is for di splaying inf ormation (use r’ s name, st ation number , etc.) on the LCD of D term . 1. C atch in ternal c all 2. Catch F orw arding Ca ll from Call F orw ard[...]

  • Seite 85

    ND-70895 (E) CHAPTER 5 Page 75 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.5.3 Data Programming (Se t up from User’ s Application ) 1. Assignment ASYD SYS1 INDEX31: 04: mo unt capacity of Common Memory (CM) 4Mby te IN DEX7 8 b0 = 1 (Inte rmediate S tati on Number Displ ay is in s ervice) b1 = 1 [...]

  • Seite 86

    CHAPTER 5 ND-70895 (E) Page 7 6 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.6 Inter Node Name Display 3.6.1 Functional Outline Name Displa y Service is a v ailab le betw een the netw or k. Nam e Displa y Servic e means fo r the facility of displa ying le tters (a lphabe t and etc. ) on LC D of the D [...]

  • Seite 87

    ND-70895 (E) CHAPTER 5 Page 77 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 11. The objecte d termi nal of Name Displ ay Service is only D term which has LCD. 12. “Of fi ce Code” + “Sta tion Number” i s normally d isplayed. How e ve r, when use of a logical num ber is spec if ied, only the l [...]

  • Seite 88

    CHAPTER 5 ND-70895 (E) Page 7 8 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 3.6.3 Data Programming (Se t up from User’ s Application ) Assignment Those be lo w a re e xplanat ion of the Ass ignment accordi ng to Name I nformat ion which is set up from User’ s Application. 1. ASYD SYS1 IN DE X 7 8 b[...]

  • Seite 89

    ND-70895 (E) CHAPTER 5 Page 79 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.7 O AI Fusion Main adv antages of O AI Fusion fal l do wn into th e follo wi ng. O AI Fusi on syste ms can be divided into the follo wing two types: • O AI T erm in a l Anywhere • Mul ti ple IP s 3.7.1 O AI T erminal A [...]

  • Seite 90

    CHAPTER 5 ND-70895 (E) Page 8 0 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices (d) The node that accommoda te s t he IP mus t be initi alized wh en all the oth er nodes are in on-li ne mode. (e) The User ’ s Appli cation ( U AP) mus t be booted up aft er the conf irmation of the establi shment of the Fu[...]

  • Seite 91

    ND-70895 (E) CHAPTER 5 Page 81 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.7.2 Multiple IPs 3.7.2.1 Functional Outline In this conf igura tion (Mul tiple IP s), IP can be accommodated t o multip le nodes in a Fusion Ne twork. Since Seri es 7400 (Relea se 8) softw are, estab lishing the CCIS line i[...]

  • Seite 92

    CHAPTER 5 ND-70895 (E) Page 8 2 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices (e) O AI terminals to be controlled from different IPs ca n not be accommo da ted in a node. (f) Whe n the I MG-U syst em is inclu ded in a Fu sion N etwork (Mu ltiple I Ps), take the foll o wing conditions into considera tion [...]

  • Seite 93

    ND-70895 (E) CHAPTER 5 Page 83 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 1. T h e following a re the q uick re fe rence ta b le of op t ional softwa re and s ys tem data p rogr a mmi ng f or each O AI system conf igurat ion. (See Figure 5-1 “ Net work Conf ig uration of O AI sys tems ” fo r ne[...]

  • Seite 94

    CHAPTER 5 ND-70895 (E) Page 8 4 Revision 1. 0 OFFICE D A T A DESIGN Proced ure f or Settin g Office Data for OAI Ser vices 2. Some not ices for PBX commands data pr ogramming ar e describ ed belo w . (See Figur e 5-1 “ Networ k Conf i gur at ion of O AI sys tems ” for n etwo rk conf igura tion o f O AI s ystems.) : Ass ign da ta by t he corr es[...]

  • Seite 95

    ND-70895 (E) CHAPTER 5 Page 85 Revision 1. 0 OFFICE D A T A DESIGN Procedu re f or Setting O ffic e Data for O AI Ser vic es 3.7.3 Example of Us e of Facility on Fusion Network As a e xample of us e of f aciliti es thro ugh Fusi on Netw ork, the e xplanati ons will g i v e in the follo wi ng about Fre e Locatio n F acili ty (FLF ). By usi ng Free L[...]

  • Seite 96

    CHAPTER 5 ND-70895 (E) Page 8 6 Revision 1. 0 This page is for yo ur notes.[...]

  • Seite 97

    ND-70895 (E) CHAPTER 6 Page 87 Revision 1. 0 CHAPTER 6 MAINTENANCE This chapt er explains main tenance, fault diagnosis out of syste m message s, fault repair proce dure of the NEAX2400 IMX OAI Syste m . 1. General When a fault ha s been discov ered in t he course of mai ntenance wor ks, the fault is to be diagno sed out of syst em mess a ges and i[...]

  • Seite 98

    CHAPTER 6 ND-70895 (E) Page 8 8 Revision 1. 0 MAINTENANCE Maintenan ce 2. Maintenance 2.1 Routine Maintenance By the routine ma intenance on t he NEAX2400 I MX O AI S ystem, t he follo win g are pe rformed. 1. Syste m messages pert ainin g to O AI faul ts A check is made to see if an y syste m message pert aining to O AI fa ults is printed out . (R[...]

  • Seite 99

    ND-70895 (E) CHAPTER 6 Page 89 Revision 1. 0 MAINTENANCE System M essages 3. System Messages 3.1 O utli ne If any of the NEAX2400 IMX OAI functions becomes faulty , the corre sponding system message sh own in T able 6-2 is displ ayed. Th is sect ion e xpl ains the mea nin g of e ach sy stem mes sage a nd messa ge detail d ata. T able 6-2 System Mes[...]

  • Seite 100

    CHAPTER 6 ND-70895 (E) Page 9 0 Revision 1. 0 MAINTENANCE System Messa ges 3.2 Messag e Detail Dat a This para graph de scribes t he detail ed infor mation on the fau lts indic ated by system message s (messag e detai l data). 3.2.1 Messag e Detail Dat a of System Mes sage “4-R ” System Message 4-R: TCP/IP Li nk Fai lure 1. Prin t- out F ormat [...]

  • Seite 101

    ND-70895 (E) CHAPTER 6 Page 91 Revision 1. 0 MAINTENANCE System M essages 3.2.2 Messag e Detail Dat a of Syst em Message “26 - V” System Messa ge 26-V : LAN Interface Erro r Report ( O AI /M IS) 1. Prin t- out F ormat 2. Prin t- out infor m ati on (typical ) -TCP/IP pa rt- ~ IP add ress o f the err or -dete cted O AI/MIS termi nal ~ Port N o. U[...]

  • Seite 102

    CHAPTER 6 ND-70895 (E) Page 9 2 Revision 1. 0 MAINTENANCE F aul t Diagnosis 4. Fault Di agnosis 4.1 General If a f ault occurs t o the NEAX2400 IMX O AI Sys tem, the c orresponding syst em message is d isplayed. This sectio n e xplains t he pro cedure s of f aul t diagnosi s by sy stem messag es and of fau lt repairs . Figure 6-2 Flow o f Fault Rep[...]

  • Seite 103

    ND-70895 (E) CHAPTER 6 Page 93 Revision 1. 0 MAINTENANCE F aul t Diagnosis 4.2 Diagnosis fr om System Messa ges The fl o w of w orks fr om dia gnosis o f syste m message u p to discovery of the cause of the fau lt is s how n in Figure 6- 3 . Figur e 6-3 Flow of Diagnosis out of System Messages Diagnos is fr om Sy s tem Mes s age Ident ifi cation of[...]

  • Seite 104

    CHAPTER 6 ND-70895 (E) Page 9 4 Revision 1. 0 MAINTENANCE F aul t Diagnosis 4.2.1 TCP/IP Link Failure For det ails of Sy stem Mass age “ 4-R ” and “ 26-V ” , see Section 3.2.1 an d 3.2.2 in this Ch apter . According to each f ault situation, perf orm the repairing p rocedure referring to Ta b l e 6 - 4 and Ta b l e 6 - 5 . When M e ssag e ?[...]

  • Seite 105

    ND-70895 (E) CHAPTER 6 Page 95 Revision 1. 0 MAINTENANCE F aul t Diagnosis Host is still abn o rm al st at u s? Host is o ut of o rder . Repair the Hos t computer . PZ-PC19 (LANI) card i s out of orde r . F or the repla cement proc edure, See “ Sys tem Operation an d Maintenance Ma nual ” . A If yes, If no,[...]

  • Seite 106

    CHAPTER 6 ND-70895 (E) Page 9 6 Revision 1. 0 This page is for yo ur notes.[...]