NeoDigits.com X5000 HD Bedienungsanleitung

User Manual HELIOS X5000 HD Up scaling Multimedia & DVD Player HANTZ + P ARTNER The Upgrade Company! www.hantz.com[...]

General Introduction Thank you for purchasing your new HELIOS X5000 Network Media player . The Helios X5000 is built with professional-grade components and st ate-of-the-art features. Unlike your standard DVD player , the X5000 is somewhat of a mini-computer . And like all other computers, you will notice that it t akes some time for this player to[...]

T able of content s 1. Safety precautions 2. Before Use What’s-in-the-box checklist Overview of HELIOS X5000 Supported Discs and Formats Precautions 3. Front p anel 4. Front Panel Display 5. Rear Panel 6. Remote Control 7. Prep arations Connecting to a TV Connecting to audio Equipment Connecting to Network Connecting to Wireless Network 8. Before[...]

1) Safety Precautions Symbols W arning: key operations and maintenance instruction enclosed with the player Caution: DO NOT open the cover of the player to avoid the risk of f ire or electric shock. Contact a professional for re pair . W arning: Dangerous high voltage inside and risk of electrical shock. CAUTION T o reduce the risk of fire, electri[...]

2) Before Use What’ s-in-the-box checklist • One HELIOS X5000 HD Upscaling Multimedia & DVD player • One Remote Control • T wo AA batteries for remote control • One HDMI digital video connection cable • One RCA audio video cable • One Power cable • One Quick S tart Guide Select the correct power supply voltage The HELIOS X5000 w[...]

Overview of HELIOS X5000 Main features • High Definition Upscaling DVD Player up to 1080P(1920x1080) resolution • High Definition Network Media Player • Video (stand ard and high definition)/audio/picture media file playback • Built-in 10/100M LAN and 54M 802.1 1G WIFI • HELIOS Media Portal* (Online radio, television and news broadcasts) [...]

M P 3 6 4 k ～ 192kbp s 32k/44.1k/48kHz WMA (e xcluding WMA9 Pro) 64k ～ 192kbps 44.1k/48kHz O g g V o r b i s 6 4 k ～ 192kbps － A A C 6 4 k ～ 192kbp s 32k/44.1k/48kHz P C M ( W A V E ) － 3 2 k / 4 4 . 1 k / 4 8 k H z * Copyright-protected WMA discs cannot be play ed directly but copy protected discs & files can be played over the LAN[...]

fingertips will not get on the surface. Do not stick p aper or tape on the disc. After playing, store the disc in it s case. Do not expose the disc to direct sunli ght or sources of hea t. For example, do not leave a disc in a parked car exposed to direct sunlight. Clean discs with a clean cloth. Wipe the disc from the center ou t. Do not wipe in a[...]

5) Rear p anel 1. LAN (RJ45) connector . 2. HDMI digital video output. 3. S-video output 4. Composite video output 5. Component video output 6. Coaxial digital audio output 7. Optical digital audio output 8. External antenna connector 9. 2 channel(left and right) stereo audio output s 10. USB connector 11. Heat sink 12. V oltage switch 13. Power co[...]

6) Remote control All the features of the Helios X5000 can be acce ssed with the remote control via two user modes: media player mode- to play DVD/ CD and audio/video files network mode- to browse the Internet and the local area network. Some buttons on the remote control operate differently in media player mode 1. Power On/Off 2. Eject: open or cl[...]

7) Prep aration Connecting to a TV / Display Depending on your TV and other equi pment yo u w ish to connect, there are vario us ways you can connect the player to your A V equipment and computer network. Please refer to the manual of your TV , stereo system or other devices where necessary to make the best connections. For better sound reproductio[...]

Use the HDMI cable to connect the player to the HDMI input of your display . When a HDMI output resolution is selected your X5000 will output both video and audio. If you wish to use a DVI connection instead of H DMI, you can connect to your TV using a HDMI to DVI converter cable. If using DVI, you will have to connect your sou nd system separately[...]

D. Composite video connection Using the A V cables supplied, insert the yellow cable into the video socket on your TV / Display and player . Insert the white cable into the left channel and the red cable into the right channel audio socket output on the player . Then connected the white (left) and red (right) audio cables to your TV / display . E. [...]

If there is an s-video input socket on your TV than you connect and the player using an S-Video cable. Use the supplied audio cable to connect the play er to the TV Or Y ou can digital audio connection (coaxial / optical) or 5.1 ch annel connection to your A V receiver . Connecting to Audio equipment The HELIOS X5000 has two differe nt audio output[...]

Connect the video output of the play er to the video input of your TV system using the corresponding cable. Use the fiber optic or coaxial cable to connect th e player output to the A V receiver digital input. Network Connection: A. Hard wired connection (LAN) • Connecting to broadband router with built-in switch or HUB Please use Cat.5 cable to [...]

9. Connect the network cable to th e LAN RJ45 connector at the back of the Hel i os X500 0. 10. Click <Setup> on your remote to enter the setup menu, 11. Go to <LAN> to open the LAN settings sub menu. 12. If you r network has a router or a DHCP server, yo u can sim ply select <automat ic> allowing the play er to connect to your ne[...]

B. Wireless network connection • Wireless connection to an Access Point You can connect HELIOS X5000 to your network wirelessly by first clicking <Setup> on your remote control. Once you enter the setup menu, choose <WiFi Setup> to get to the submenu. Once in <wireless> settings, you need to switch the “preferred network” to[...]

• Wireless connection to an Ad-Hoc network If your wireless network does not use a wireless router / switch or you only have 1 wireless computer with no wireless infrastructure, you will need to use the Ad-Hoc connection. Set up wireless connection as described abo ve. After reboot, go to the wireless setup and select Connection: Ad-Hoc 8) Before[...]

1. T urn on the player and your display device 2. If the TV screen is blank, click the “TV mode” button on the remote c ontrol a few times until you see the “HELIOS” logo across the screen. The default V ideo setting of the player is Composite/S-Video/Component NTSC. Pressing the “TV Mode” button switches the pla yer through each of the[...]

Setup your HELIOS X5000 Language Before you select a language for the player to use in it’s menus, you must first male sure it’s properly connected to your display equipment. (see section 3, connecting to a TV for details) 1. T urn on the player and your display device, then wait for the player to fully boot up. 2. Click the <Setup> butt [...]

video) signal to your TV. A DVI TV can not accept a HDMI signal so therefore the defaul t setting is for the HDMI to output a DVI signal. To enable full HDMI o utput (audio and vi deo), you must first sele ct a HDMI resolution in the above Video mode se tup. Then, clear the “Connect ed to DVI TV” check box. Next, press S ave and resta rt the pl[...]

network properly (see section 3, connecting to a network for det ails) A. T o setup a network connection with DHCP server If you have a router/switch with built-in DHCP server or if you hav e a DHCP server computer in the same network, the HELIOS X5000 will automatically detect and configure the network settings. T o check if the network is set pro[...]

computer in the same network, but for the last segment, enter any number between (10~254) – make sure there are no other computers in the LAN using t he same number as what you inter into this last segment * Y ou can check the “appendix” section for checking the IP address of the computer in the LAN. T o setup wireless connection 1. T urn on [...]

If you have the NeoLink media server software installed on a computer on your network, you can play video, audio and photo content stored on the network. When the HELIOS X5000 is connected to the network it will detect all computers running the NeoLink Server software. All server names of computers running t he NeoLink will be listed on the home pa[...]

Setting your system browser The System browser is used to display and navigate around the player’s system menus and settings. You have the option of enabling HD (high definition) mode on your Browser Option. When the browser is in HD mode, more information can be displayed on the screen but text and icons will be smaller. To change the Browser mo[...]

If you want to disable automatic playback feature, just press “setup” button to enter the player ’s setup, choose “DVD Setup” Î “Enable Auto Play” to “off”. T o play media files stored on a disc or USB device. The HELIOS X5000 can play video, audio, and photo media files sto red in DVD/ CD recordable discs, memory cards (via USB [...]

To play content from a computer on the network, simply use the cursor on the remote control to select the server on the list and press <enter>. Then use the NeoLink browser to select the content you wish to play. The default media that NeoLink makes available to your X5000 is the contents of the My documents folder (My Music, My Videos, My Pi[...]

Through the Online Media section of NeoLink you can build your own customized collection of bookmarks for internet content. On your NeoLink server preferences, use the “service” section select which online services are made available to the X5000. The Web Bookmark option let s you s hare your web bookmarks from your internet browser with your X[...]

access bookmarks saved on your comp uter web browser using NeoLink. Y ou can bookmark anything from si mple web pages to an RS S feed of local traffi c information. For example, a boo kmark could be for an RSS weather feed o f your local weather information. A. From the weather website, look for their RSS feed lists. It will me somet hing like http[...]

Tip, The list is alphabetical so W eb bookmarks will always be near the end of the list. T o go from the beg inning of a list directly to the end , simply press [Up] on your R emote control. Sharing content with other HELIOS users Y ou can share your media li brary with a friend / other HELIOS users o ver a LAN or internet. If you have your friends[...]

10) Player Setup Menus The following section describes the various setup options on the X 5000. T o access the setup, press <Setup> on the remote control. When change an option go to <Save> Î <Enter>. Y ou may be asked to reboot to enable the changes. Or Press <Cancel> to ignore any changes. T o restore all settings to thei[...]

- Screen saver: select how long after the player is idle to wait before starting the screen save r . Minimum value is 1 minute - System Language: change the language of the player ’s menus – English, French, German, S panish, Italian or Dutch - Encoding language: select the iso encoding language for the player’s operating system to use with d[...]

- VCD PCB : T urn PCB on / off. (only applies to VCD discs) - DVD Parental Level : Set the p arental restriction level of the player . Restriction can be set to “Off” or 1 to 8. For example, if you set this to level 3 – PG , the player will not play di scs rated higher than PG without the Parental p assword. - DVD Parental control p ass word:[...]

- Connection Now Using: Displays the connection type that the player is currently using to connect to the network. Wired Network or Wire less Network - Preferred: Set the preferred connection method of the player . Wired or wireless. If the preferred connection type is available, the other will be ignored. - A vailable: A list of available wireless[...]

- Secondary NTP Server: Set a secondary NTP server - Time Zone: Set the time zone of the player . - Daylight Savings: Enable / disable daylight saving for your location. Firmware Settings: - Firmware V ersion: Displays the current firmware version. - File System V ersion: Displays the file system version - Firmware Up date Link: This is a link to t[...]

T roubleshooting Problem Possible cause and solution No Power Ensure AC mains power supply is plugged in properly and the socket is ok. Make sure po wer lead is firmly connected to player . Can not play disc 1. Switch the power on 2. The disc type is not supported by the player or the disc is seriously damaged. Only use discs that can be played by [...]

Note: there is no audio output when the player is in any of the following modes: Pause, S tep, Slow motion, FF or FR 3. If using a the player with a HDMI TV connection, please ensure “Connected to DVI TV” option in player setup is cleared Can not browse network (wired) 1. Poor connection – check all network connection 2. Switch failure – tr[...]

Support information If you have any questions about this product, you can submit a support ticket on www .neodig its.com/esupport or you can email us at esupport@neodigit s.com . All questions will be answered within 48 hours (excluding Sa turday , Sunday and public holidays) If you have any suggestions about this product, feel free to cont act us [...]