NETGEAR XSM7224S-100NAS Bedienungsanleitung

202-10770-01 November 2010 NETGEAR , Inc. 350 Plumeria Dr. San Jose, CA 95124 USA ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0[...]

ii v1.0, November 2010 © 2010 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR and the NETGEAR logo are registered trademarks, and ProSafe is a trademark of NETGEAR, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their resp[...]

v1.0, November 2010 iii Product and Publication Details Model Number: XSM7224S Publication Date: November 2010 Product Family: managed switch Product Name: ProSafe XSM7224S Managed Stackable Switch Home or Business Product: Business Language: English Publication Part Number: 202-10770-01 Publication Version Number 1.0[...]

v1.0, November 2010 iv[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 v v1.0, November 2010 Contents About This Manual Audience ...................................................................................................................... ..... ix About the Software ......................................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 vi v1.0, November 2010 VLAN Commands ......................................................................................................... 3-32 Double VLAN Commands ............................................................................................ 3-47 Voice VL[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 vii v1.0, November 2010 Chapter 5 Quality of Service (QoS) Commands Class of Service (CoS) Commands ................................................................................ 5-2 Differentiated Services (DiffServ) Commands ..............................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 viii v1.0, November 2010 Secure Shell (SSH) Commands ................................................................................... 7-16 Management Security Commands ............................................................................... 7-19 Hypertext Transfer [...]

ix v1.0, November 2010 About This Manual This document describes command-line interface (CLI) commands you use to view and configure XSM7224S software. You can access the CLI by using a direct connection to the serial port or by using telnet or SSH over a remote network connection. Audience This document is for system administrators who configure a[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 x v1.0, November 2010 Scope The software encompasses both hardware and software support. The software is partitioned to run in the following processors: • CPU – This code runs the networking device management portfolio and controls the overall networking device hardware.[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 xi v1.0, November 2010 • Typographical Conventions . This manual uses the following typographical conventions: • Formats . This manual uses the following formats to highlight special messages: • Scope . This manual is written for the XSM7224S. Italic Emphasis, books, C[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 xii v1.0, November 2010 How to Print This Manual To print this manual, your computer must have the free Adobe Acrobat reader installed in order to view and print PDF files. The Acrobat reader is available on the Adobe Web site at http://www.adobe.com . Revision History Part [...]

1-1 v1.0, November 2010 Chapter 1 Using the Command-Line Interface The command-line interface (CLI) is a text-based way to manage and monitor the system. You can access the CLI by using a direct serial connection or by using a remote logical connection with telnet or SSH. This chapter describes the CLI syntax, conventions, and modes. It contains th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-2 v1.0, November 2010 • network parms is the command name. • <ipaddr> and <netmask> are parameters and represent required values that you must enter after you type the command keywords. • [gateway] is an optional parameter[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-3 v1.0, November 2010 Common Parameter Values Parameter values might be names (strings) or numbers.To use spaces as part of a name parameter, enclose the name value in double quotes. For example, the expression “System Name with Spaces”[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-4 v1.0, November 2010 The slot number has two uses. In the case of physical ports, it identifies the card containing the ports. In the case of logical and CPU ports it also identifies the type of interface or port. The port identifies the s[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-5 v1.0, November 2010 shutdown configuration command reverses the shutdown of an interface. Use the command without the keyword no to re-enable a disabled feature or to enable a feature that is disabled by default. Only the configuration co[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-6 v1.0, November 2010 Table 5. CLI Command Modes Command Mode Prompt Mode Description User EXEC Switch> Contains a limited set of commands to view basic system information. Privileged EXEC Switch# Allows you to issue any EXEC command, en[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-7 v1.0, November 2010 Table 6 explains how to enter or exit each mode. TACACS Config Switch (Tacacs)# Contains commands to configure properties for the TACACS servers. DHCP Pool Config Switch (Config dhcp-pool)# Contains the DHCP server IP [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-8 v1.0, November 2010 Class-Map Config From the Global Config mode, enter class-map , and specify the optional keyword ipv4 to specify the Layer 3 protocol for this class. See “class-map” on page 5-12 for more information. To exit to th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-9 v1.0, November 2010 Command Completion and Abbreviation Command completion finishes spelling the command when you type enough letters of a command to uniquely identify the command keyword. Once you have entered enough letters, press the S[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-10 v1.0, November 2010 CLI Line-Editing Conventions Table 8 describes the key combinations you can use to edit commands or increase the speed of command entry. You can access this list from the CLI by entering help from the User or Privileg[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-11 v1.0, November 2010 Using CLI Help Enter a question mark (?) at the command prompt to display the commands available in the current mode. (switch) >? enable Enter into user privilege mode. help Display help for various special keys. l[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Using the Command-Line Interface 1-12 v1.0, November 2010 (switch) #show m? mac-addr-table mac-address-table monitor Accessing the CLI You can access the CLI by using a direct console connection or by using a telnet or SSH connection from a remote management host. For the in[...]

2-1 v1.0, November 2010 Chapter 2 Stacking Commands The Stacking Commands chapter includes the following sections: • “Dedicated Port Stacking” on page 2-1 • “Front Panel Stacking Commands” on page 2-10 • “Non-Stop Forwarding Commands” on page 2-12 • “Stack Firmware Synchronization Commands” on page 2-14 Dedicated Port Stacki[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-2 v1.0, November 2010 member This command configures a switch. The < unit > is the switch identifier of the switch to be added/removed from the stack. The < switchindex > is the index into the database of the supported switch types, indicating[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-3 v1.0, November 2010 active Primary Management Unit fails. The switch priority defaults to the hardware management preference value 1. Switches that do not have the hardware capability to become the Primary Management Unit are not eligible for management[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-4 v1.0, November 2010 nvram:startup-config (in Privileged EXEC) command before performing the stack move. A stack move causes all routes and layer 2 addresses to be lost. This command is executed on the Primary Management Unit. The system prompts you to c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-5 v1.0, November 2010 set slot disable This command configures the administrative mode of the slot(s). If you specify [all] , the command is applied to all slots, otherwise the command is applied to the slot identified by <unit/slot> . If a card or [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-6 v1.0, November 2010 Use this command when installing or removing cards. If a card or other module is present in this slot, the power mode is applied to the contents of the slot. If the slot is empty, the power mode is applied to any card inserted into t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-7 v1.0, November 2010 If you supply a value for <unit/slot> , the following additional information appears: show supported cardtype This commands displays information about all card types or specific card types supported in the system. If you do not[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-8 v1.0, November 2010 If you supply a value for <cardindex> , the following output appears: show switch This command displays information about all units in the stack or a single unit when you specify the unit value. When you do not specify a value [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-9 v1.0, November 2010 When you specify a value for <unit> , the following information appears: show supported switchtype This commands displays information about all supported switch types or a specific switch type. Term Definition Management Status[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-10 v1.0, November 2010 If you do not supply a value for <switchindex> , the following output appears: If you supply a value for <switchindex> , the following output appears: Front Panel Stacking Commands This section describes the commands you[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-11 v1.0, November 2010 show stack-port This command displays summary stack-port information for all interfaces. For Each Interface: show stack-port counters This command displays summary data counter information for all interfaces. Format show stack-port [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-12 v1.0, November 2010 show stack-port diag This command shows front panel stacking diagnostics for each port and is only intended for Field Application Engineers (FAEs) and developers. An FAE will advise on the necessity to run this command and capture t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-13 v1.0, November 2010 nsf This command enables non-stop forwarding. no nsf This command disables non-stop forwarding. show nsf This command shows the status of non-stop forwarding. Example: (Switch)#show nsf Administrative Status.........................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-14 v1.0, November 2010 show checkpoint statistics This command displays the statistics for the checkpointing process. Example: (Switch)#show checkpoint statistics Messages Checkpointed.....................6708 Bytes Checkpointed........................894[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-15 v1.0, November 2010 • Delete image • Update bootcode • Clear config A reboot operation is allowed during stack firmware synchronization. If the firmware is corrupted during stack firmware synchronization, manual intervention by the administrator [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-16 v1.0, November 2010 boot auto-copy-sw trap This command sends SNMP traps related to stack firmware synchronization. no boot auto-copy-sw trap This command disables sending SNMP traps related to stack firmware synchronization. boot auto-copy-sw allow-do[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Stacking Commands 2-17 v1.0, November 2010 show auto-copy-sw This command displays the stack firmware synchronization configuration status. Example: (Switch)#show auto-copy-sw Stack Firmware Synchronization Synchronization: Enabled SNMP Trap status: Enabled Allow Downgrade: [...]

3-1 v1.0, November 2010 Chapter 3 Switching Commands This chapter describes the switching commands available in the managed switch CLI. The Switching Commands chapter includes the following sections: • “Port Configuration Commands” on page 3-2 • “show port description” on page 3-9 • “VLAN Commands” on page 3-32 • “Double VLAN [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-2 v1.0, November 2010 • “LLDP-MED Commands” on page 3-172 • “Denial of Service Commands” on page 3-183 • “MAC Database Commands” on page 3-195 • “ISDP Commands” on page 3-197 • “Priority-Based Flow control commands” on page [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-3 v1.0, November 2010 interface range This command gives you access to a range of port interfaces, allowing the same port configuration to be applied to a set of ports. interface vlan This command gives you access to the vlan virtual interface mode, whic[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-4 v1.0, November 2010 no auto-negotiate This command disables automatic negotiation on a port. auto-negotiate all This command enables automatic negotiation on all ports. no auto-negotiate all This command disables automatic negotiation on all ports. For[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-5 v1.0, November 2010 description Use this command to create an alpha-numeric description of the port. mtu Use the mtu command to set the maximum transmission unit (MTU) size, in bytes, for frames that ingress or egress the interface. You can use the mtu[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-6 v1.0, November 2010 shutdown This command disables a port. no shutdown This command enables a port. shutdown all This command disables all ports. Note: You can use the shutdown command on physical and port-channel (LAG) interfaces, but not on VLAN rout[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-7 v1.0, November 2010 no shutdown all This command enables all ports. speed This command sets the speed and duplex setting for the interface. speed all This command sets the speed and duplex setting for all interfaces. Format no shutdown all Mode Global [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-8 v1.0, November 2010 show port This command displays port information. show port protocol This command displays the Protocol-Based VLAN information for either the entire system, or for the indicated group. Format show port {<unit/slot/port> | all}[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-9 v1.0, November 2010 show port description This command displays the port description for every port. show port status This command displays the Protocol-Based VLAN information for either the entire system, or for the indicated group. Term Definition Gr[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-10 v1.0, November 2010 Physical Mode Either “Auto” or fixed speed and duplex mode. Physical Status The actual speed and duplex mode. Link Status Whether the link is Up or Down. Loop Status Whether the port is in loop state or not. Partner Flow Contro[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-11 v1.0, November 2010 Spanning Tree Protocol (STP) Commands This section describes the commands you use to configure Spanning Tree Protocol (STP). STP helps prevent network loops, duplicate messages, and network instability. spanning-tree This command s[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-12 v1.0, November 2010 spanning-tree bpduflood Use this command to enable BPDU Flood on the interface. no spanning-tree bpduflood Use this command to disable BPDU Flood on the interface. spanning-tree bpduguard Use this command to enable BPDU Guard on th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-13 v1.0, November 2010 spanning-tree bpdumigrationcheck Use this command to force a transmission of rapid spanning tree (RSTP) and multiple spanning tree (MSTP) BPDUs. Use the <unit/slot/port> parameter to transmit a BPDU from a specified interface[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-14 v1.0, November 2010 spanning-tree configuration revision This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is currently using. The Configuration Identifier Revision Level is a numbe[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-15 v1.0, November 2010 spanning-tree forceversion This command sets the Force Protocol Version parameter to a new value. • Use 802.1d to specify that the switch transmits ST BPDUs rather than MST BPDUs (IEEE 802.1d functionality supported). • Use 802[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-16 v1.0, November 2010 no spanning-tree forward-time This command sets the Bridge Forward Delay parameter for the common and internal spanning tree to the default value. spanning-tree guard This command selects whether loop guard or root guard is enabled[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-17 v1.0, November 2010 no spanning-tree tcnguard This command disables the propagation of received topology change notifications and topology changes to other ports. spanning-tree max-age This command sets the Bridge Max Age parameter to a new value for [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-18 v1.0, November 2010 no spanning-tree max-hops This command sets the Bridge Max Hops parameter for the common and internal spanning tree to the default value. spanning-tree mst This command sets the Path Cost or Port Priority for this port within the m[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-19 v1.0, November 2010 no spanning-tree mst This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance, or in the common and internal spanning tree to the respective default values. If you specify an <mst[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-20 v1.0, November 2010 no spanning-tree mst instance This command removes a multiple spanning tree instance from the switch and reallocates all VLANs allocated to the deleted instance to the common and internal spanning tree. The parameter <mstid> [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-21 v1.0, November 2010 spanning-tree mst vlan This command adds an association between a multiple spanning tree instance and one or more VLANs so that the VLAN(s) are no longer associated with the common and internal spanning tree. The parameter <msti[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-22 v1.0, November 2010 spanning-tree port mode all This command sets the Administrative Switch Port State for all ports to enabled. no spanning-tree port mode all This command sets the Administrative Switch Port State for all ports to disabled. spanning-[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-23 v1.0, November 2010 spanning-tree bpduforwarding Normally a switch will not forward Spanning Tree Protocol (STP) BPDU packets if STP is disabled. However, if in some network setup, the user wishes to forward BDPU packets received from other network de[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-24 v1.0, November 2010 show spanning-tree brief This command displays spanning tree settings for the bridge. The following information appears. Topology Change Count Number of times changed. Topology Change Boolean value of the Topology Change parameter [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-25 v1.0, November 2010 show spanning-tree interface This command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The <unit/slot/port > is the desired switch port. The following details a[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-26 v1.0, November 2010 show spanning-tree mst port detailed This command displays the detailed settings and parameters for a specific switch port within a particular multiple spanning tree instance. The parameter <mstid> is a number that correspond[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-27 v1.0, November 2010 If you specify 0 (defined as the default CIST ID) as the <mstid> , this command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The <unit/slot/port > is the [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-28 v1.0, November 2010 External Port Path Cost The cost to get to the root bridge of the CIST across the boundary of the region. This means that if the port is a boundary port for an MSTP region, then the external path cost is used. Designated Root Ident[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-29 v1.0, November 2010 show spanning-tree mst port summary This command displays the settings of one or all ports within the specified multiple spanning tree instance. The parameter <mstid> indicates a particular MST instance. The parameter { <u[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-30 v1.0, November 2010 show spanning-tree mst summary This command displays summary information about all multiple spanning tree instances in the switch. On execution, the following details are displayed. STP Mode Indicates whether spanning tree is enabl[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-31 v1.0, November 2010 show spanning-tree summary This command displays spanning tree settings and parameters for the switch. The following details are displayed on execution of the command. show spanning-tree vlan This command displays the association b[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-32 v1.0, November 2010 VLAN Commands This section describes the commands you use to configure VLAN settings. vlan database This command gives you access to the VLAN Config mode, which allows you to configure VLAN characteristics. network mgmt_vlan This c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-33 v1.0, November 2010 vlan This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification number (ID 1 is reserved for the default VLAN). The vlan-list contains VlanId's in range <1- 4093>. Separate non-consecutiv[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-34 v1.0, November 2010 no vlan acceptframe This command resets the frame acceptance mode for the interface to the default value. vlan ingressfilter This command enables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-35 v1.0, November 2010 vlan name This command changes the name of a VLAN. The name is an alphanumeric string of up to 32 characters, and the ID is a valid VLAN identification number. ID range is 1-4093. no vlan name This command sets the name of a VLAN t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-36 v1.0, November 2010 vlan participation all This command configures the degree of participation for all interfaces in a VLAN. The ID is a valid VLAN identification number. You can use the following participation options: vlan port acceptframe all This [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-37 v1.0, November 2010 no vlan port acceptframe all This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All mode, untagged frames or priority frames received on this interface are accepted and assigned the value of the [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-38 v1.0, November 2010 no vlan port pvid all This command sets the VLAN ID for all interfaces to 1. vlan port tagging all This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging is enabled, traffic is transmitted [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-39 v1.0, November 2010 no vlan protocol group This command removes a protocol group. vlan protocol group name This command assigns a name to a protocol-based VLAN groups. The groupname variable can be a character string of 0 to 16 characters. no vlan pro[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-40 v1.0, November 2010 no vlan protocol group add protocol This command removes the < protocol> from this protocol-based VLAN group that is identified by this < groupid> . The possible values for protocol are ip, arp, and ipx . protocol group[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-41 v1.0, November 2010 no protocol vlan group This command removes the interface from this protocol-based VLAN group that is identified by this <groupid> . protocol vlan group all This command adds all physical interfaces to the protocol-based VLAN[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-42 v1.0, November 2010 vlan pvid This command changes the VLAN ID per interface. no vlan pvid This command sets the VLAN ID per interface to 1. vlan tagging This command configures the tagging behavior for a specific interface in a VLAN to enabled. If ta[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-43 v1.0, November 2010 vlan association subnet This command associates a VLAN to a specific IP-subnet. no vlan association subnet This command removes association of a specific IP-subnet to a VLAN. vlan association mac This command associates a MAC addre[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-44 v1.0, November 2010 show vlan This command displays a list of all configured VLAN . show vlan <vlanid> This command displays detailed information, including interface information, for a specific VLAN. The ID is a valid VLAN identification number[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-45 v1.0, November 2010 show vlan brief This command displays a list of all configured VLANs. Current The degree of participation of this port in this VLAN. The permissible values are: • Include - This port is always a member of this VLAN. This is equiv[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-46 v1.0, November 2010 show vlan port This command displays VLAN port information. show vlan association subnet This command displays the VLAN associated with a specific configured IP-Address and net mask. If no IP address and net mask are specified, the[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-47 v1.0, November 2010 show vlan association mac This command displays the VLAN associated with a specific configured MAC address. If no MAC address is specified, the VLAN associations of all the configured MAC addresses are displayed. Double VLAN Comman[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-48 v1.0, November 2010 mode dot1q-tunnel This command is used to enable Double VLAN Tunneling on the specified interface. no mode dot1q-tunnel This command is used to disable Double VLAN Tunneling on the specified interface. By default, Double VLAN Tunne[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-49 v1.0, November 2010 no mode dvlan-tunnel This command is used to disable Double VLAN Tunneling on the specified interface. By default, Double VLAN Tunneling is disabled. show dot1q-tunnel Use this command without the optional parameters to display all[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-50 v1.0, November 2010 Voice VLAN Commands This section describes the commands you use for Voice VLAN. Voice VLAN enables switch ports to carry voice traffic with defined priority so as to enable separation of voice and data traffic coming onto the port.[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-51 v1.0, November 2010 no voice vlan (Global Config) Use this command to disable the Voice VLAN capability on the switch. voice vlan (Interface Config) Use this command to enable the Voice VLAN capability on the interface. You can configure Voice VLAN in[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-52 v1.0, November 2010 show voice vlan When the interface parameter is not specified, only the global mode of the Voice VLAN is displayed. When the interface is specified: . Provisioning (IEEE 802.1p) Commands This section describes the commands you use [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-53 v1.0, November 2010 vlan port priority all This command configures the port priority assigned for untagged packets for all ports presently plugged into the device. The range for the priority is 0-7. Any subsequent per port configuration will override [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-54 v1.0, November 2010 switchport protected (Global Config) Use this command to create a protected port group. The <groupid> parameter identifies the set of protected ports. Use the name <name> pair to assign a name to the protected port grou[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-55 v1.0, November 2010 no switchport protected (Interface Config) Use this command to configure a port as unprotected. The groupid parameter identifies the set of protected ports to which this interface is assigned. show switchport protected This command[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-56 v1.0, November 2010 Private Group Commands This section describes commands used to configure private group and view private group configuration information. Private group can be used to create a group of ports that can or can not share traffic to each[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-57 v1.0, November 2010 no switchport private group This command is used to remove the specified port from the given private group. private-group name This command is used to create a private group with name <private-group-name>. The name string can[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-58 v1.0, November 2010 show private-group This command displays the private groups’ information. GARP Commands This section describes the commands you use to configure Generic Attribute Registration Protocol (GARP) and view GARP status. The commands in[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-59 v1.0, November 2010 no set garp timer join This command sets the GVRP join time (for one or all ports and per GARP) to the default and only has an effect when GVRP is enabled. set garp timer leave This command sets the GVRP leave time for one port (In[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-60 v1.0, November 2010 set garp timer leaveall This command sets how frequently Leave All PDUs are generated. A Leave All PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-61 v1.0, November 2010 GVRP Commands This section describes the commands you use to configure and view GARP VLAN Registration Protocol (GVRP) information. GVRP-enabled switches exchange VLAN configuration information, which allows GVRP to provide dynamic[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-62 v1.0, November 2010 set gvrp interfacemode This command enables GVRP on a single port (Interface Config mode) or all ports (Global Config mode). no set gvrp interfacemode This command disables GVRP on a single port (Interface Config mode) or all ports[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-63 v1.0, November 2010 GMRP Commands This section describes the commands you use to configure and view GARP Multicast Registration Protocol (GMRP) information. Like IGMP snooping, GMRP helps control the flooding of multicast packets.GMRP-enabled switches[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-64 v1.0, November 2010 no set gmrp adminmode This command disables GARP Multicast Registration Protocol (GMRP) on the system. set gmrp interfacemode This command enables GARP Multicast Registration Protocol on a single interface (Interface Config mode) o[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-65 v1.0, November 2010 show gmrp configuration This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces. show mac-address-table gmrp This command displays the GMRP entries in the Multicast Forwarding Dat[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-66 v1.0, November 2010 Port-Based Network Access Control Commands This section describes the commands you use to configure port-based network access control (802.1x). Port-based network access control allows you to permit access to network services only [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-67 v1.0, November 2010 dot1x guest-vlan This command configures VLAN as guest vlan on a per port basis. The command specifies an active VLAN as an IEEE 802.1x guest VLAN. The range is 1 to the maximum VLAN ID supported by the platform. no dot1x guest-vla[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-68 v1.0, November 2010 no dot1x max-req This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. dot1x max-users Use this command to set[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-69 v1.0, November 2010 controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator and the authentication server. If the mac-based option is specified, then MAC-based dot1x authentication is enabled o[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-70 v1.0, November 2010 dot1x re-authenticate This command begins the re-authentication sequence on the specified port. This command is only valid if the control mode for the specified port is “auto” or “mac-based”. If the control mode is not “a[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-71 v1.0, November 2010 no dot1x system-auth-control This command is used to disable the dot1x authentication support on the switch. dot1x timeout This command sets the value, in seconds, of the timer used by the authenticator state machine on this port. [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-72 v1.0, November 2010 no dot1x timeout This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default values. Depending on the token used, the corresponding default values are set. dot1x unauthe[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-73 v1.0, November 2010 dot1x user This command adds the specified user to the list of users with access to the specified port or all ports. The <user> parameter must be a configured user. no dot1x user This command removes the user from the list of[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-74 v1.0, November 2010 dot1x dynamic-vlan enable Use this command to enable the switch to create VLANs dynamically when a RADIUS assigned VLAN does not exist in the switch. no dot1x dynamic-vlan enable Use this command to disable the switch from creating[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-75 v1.0, November 2010 show dot1x authentication-history This command displays 802.1X authentication events and information during successful and unsuccessful Dot1x authentication process for all interfaces or the specified interface. Use the optional ke[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-76 v1.0, November 2010 _____________________ Console Console_Default Console_Default Telnet Network_Default Network_Default SSH Network_Default Network_Default http : Local https : Local dot1x : show dot1x This command is used to show a summary of the gl[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-77 v1.0, November 2010 If you use the optional parameter ' detail <unit/slot/port >', the detailed dot1x configuration for the specified port is displayed. Control Mode The configured control mode for this port. Possible values are force-[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-78 v1.0, November 2010 Guest VLAN Period The time in seconds for which the authenticator waits before authorizing and placing the port in the Guest VLAN, if no EAPOL packets are detected on that port. Supplicant Timeout The timer used by the authenticato[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-79 v1.0, November 2010 The show dot1x detail <unit/slot/port> command will display the following MAC- based dot1x fields if the port-control mode for that specific port is MAC-based. For each client authenticated on the port, the show dot1x detail [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-80 v1.0, November 2010 show dot1x clients This command displays 802.1x client information.This command also displays information about the number of clients that are authenticated using Monitor mode and using 802.1X. EAP Response/ Id Frames Received The [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-81 v1.0, November 2010 show dot1x users This command displays 802.1x port security user information for locally configured users. Interface The physical port to which the supplicant is associated. User Name The user name used by the client to authenticat[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-82 v1.0, November 2010 Storm-Control Commands This section describes commands you use to configure storm-control and view storm-control configuration information. A traffic storm is a condition that occurs when incoming packets flood the LAN, which creat[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-83 v1.0, November 2010 no storm-control broadcast Use this command to disable broadcast storm recovery mode for a specific interface. storm-control broadcast level Use this command to configure the broadcast storm recovery threshold for an interface as a[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-84 v1.0, November 2010 storm-control broadcast rate Use this command to configure the broadcast storm recovery threshold for an interface in packets per second. If the mode is enabled, broadcast storm recovery is active, and if the rate of L2 broadcast t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-85 v1.0, November 2010 storm-control broadcast level (Global) This command configures the broadcast storm recovery threshold for all interfaces as a percentage of link speed and enables broadcast storm recovery. If the mode is enabled, broadcast storm re[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-86 v1.0, November 2010 no storm-control broadcast rate This command sets the broadcast storm recovery threshold to the default value for all interfaces and disables broadcast storm recovery. storm-control multicast This command enables multicast storm re[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-87 v1.0, November 2010 storm-control multicast level This command configures the multicast storm recovery threshold for an interface as a percentage of link speed and enables multicast storm recovery mode. If the mode is enabled, multicast storm recovery[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-88 v1.0, November 2010 storm-control multicast (Global) This command enables multicast storm recovery mode for all interfaces. If the mode is enabled, multicast storm recovery is active, and if the rate of L2 multicast traffic ingressing on an interface [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-89 v1.0, November 2010 no storm-control multicast level This command sets the multicast storm recovery threshold to the default value for all interfaces and disables multicast storm recovery. storm-control multicast rate (Global) Use this command to conf[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-90 v1.0, November 2010 no storm-control unicast This command disables unicast storm recovery mode for an interface. storm-control unicast level This command configures the unicast storm recovery threshold for an interface as a percentage of link speed, a[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-91 v1.0, November 2010 storm-control unicast rate Use this command to configure the unicast storm recovery threshold for an interface in packets per second. If the mode is enabled, unicast storm recovery is active, and if the rate of L2 broadcast traffic[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-92 v1.0, November 2010 storm-control unicast level (Global) This command configures the unicast storm recovery threshold for all interfaces as a percentage of link speed, and enables unicast storm recovery. If the mode is enabled, unicast storm recovery [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-93 v1.0, November 2010 no storm-control unicast rate This command sets the multicast storm recovery threshold to the default value for an interface and disables multicast storm recovery. storm-control flowcontrol This command enables 802.3x flow control [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-94 v1.0, November 2010 show storm-control This command displays switch configuration information. If you do not use any of the optional parameters, this command displays global storm control configuration parameters: • Broadcast Storm Control Mode may [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-95 v1.0, November 2010 shares traffic based upon the source and destination MAC address.Assign the port-channel (LAG) VLAN membership after you create a port-channel. If you do not assign VLAN membership, the port-channel might become a member of the man[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-96 v1.0, November 2010 deleteport (Global Config) This command deletes all configured ports from the port-channel (LAG). The interface is a logical unit/slot/port number of a configured port-channel. To clear the port channels, see “clear port- channel[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-97 v1.0, November 2010 lacp collector max-delay Use this command to configure the port-channel collector max delay. The valid range of < delay > is 0-65535. no lacp collector max delay Use this command to configure the default port-channel collecto[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-98 v1.0, November 2010 no lacp actor admin key Use this command to configure the default administrative value of the key. lacp actor admin state individual Use this command to set LACP actor admin state to individual. no lacp actor admin state individual[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-99 v1.0, November 2010 lacp actor admin state longtimeout Use this command to set LACP actor admin state to longtimeout. no lacp actor admin state longtimeout Use this command to set the LACP actor admin state to short timeout. lacp actor admin state pas[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-100 v1.0, November 2010 no lacp actor admin state passive Use this command to set the LACP actor admin state to active. lacp actor port priority Use this command to configure the priority value assigned to the Aggregation Port. The valid range for < p[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-101 v1.0, November 2010 no lacp actor system priority Use this command to configure the priority value associated with the Actor’s SystemID. lacp partner admin key Use this command to configure the administrative value of the Key for the protocol partn[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-102 v1.0, November 2010 lacp partner admin state individual Use this command to set LACP partner admin state to individual. no lacp partner admin state individual Use this command to set the LACP partner admin state to aggregation. lacp partner admin sta[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-103 v1.0, November 2010 no lacp partner admin state longtimeout Use this command to set the LACP partner admin state to short timeout. lacp partner admin state passive Use this command to set the LACP partner admin state to passive. no lacp partner admin[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-104 v1.0, November 2010 lacp partner port id Use this command to configure the LACP partner port id. The valid range for < port-id > is 0 to 65535. no lacp partner port id Use this command to set the LACP partner port id to the default. lacp partne[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-105 v1.0, November 2010 no lacp partner port priority Use this command to configure the default LACP partner port priority. lacp partner system id Use this command to configure the 6-octet MAC Address value representing the administrative value of the Ag[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-106 v1.0, November 2010 lacp partner system priority Use this command to configure the administrative value of the priority associated with the Partner’s System ID. The valid range for < priority > is 0 to 65535. no lacp partner system priority U[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-107 v1.0, November 2010 no port-channel static This command sets the static mode on a particular port-channel (LAG) interface to the default value. This command will be executed only for interfaces of type port-channel (LAG). port lacpmode This command e[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-108 v1.0, November 2010 no port lacpmode enable all This command disables Link Aggregation Control Protocol (LACP) on all ports. port lacptimeout (Interface Config) This command sets the timeout on a physical interface of a particular device type ( actor[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-109 v1.0, November 2010 no port lacptimeout This command sets the timeout for all physical interfaces of a particular device type ( actor or partner ) back to their default values. port-channel adminmode This command enables a port-channel (LAG). This co[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-110 v1.0, November 2010 no port-channel linktrap This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option all disables link trap notifications for all the[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-111 v1.0, November 2010 no port-channel load-balance This command reverts to the default load balancing configuration. port-channel name This command defines a name for the port-channel (LAG). The interface is a logical unit/slot/port for a configured po[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-112 v1.0, November 2010 port-channel system priority Use this command to configure port-channel system priority. The valid range of <priority> is 0- 65535. no port-channel system priority Use this command to configure the default port-channel syste[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-113 v1.0, November 2010 show lacp partner Use this command to display LACP partner attributes. The following output parameters are displayed. show port-channel brief This command displays the static capability of all port-channel (LAG) interfaces on the [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-114 v1.0, November 2010 show port-channel This command displays the static capability of all port-channels (LAGs) on the device as well as a summary of individual port-channels. For each port-channel the following information is displayed: show port-chan[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-115 v1.0, November 2010 show port-channel system priority Use this command to display the port-channel system priority. Port Mirroring Port mirroring, which is also known as port monitoring, selects network traffic that you can analyze with a network ana[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-116 v1.0, November 2010 monitor session This command configures a probe port and a monitored port for monitor session (port monitoring). Use the source interface <unit/slot/port> parameter to specify the interface to monitor. Use rx to monitor only[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-117 v1.0, November 2010 show monitor session This command displays the Port monitoring information for a particular mirroring session. Note: This is a stand-alone “no” command. This command does not have a “normal” form. Default enabled Format no[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-118 v1.0, November 2010 Static MAC Filtering The commands in this section describe how to configure static MAC filtering. Static MAC filtering allows you to configure destination ports for a static multicast MAC filter irrespective of the platform. macfi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-119 v1.0, November 2010 The <vlanid> parameter must identify a valid VLAN. macfilter adddest Use this command to add the interface to the destination filter set for the MAC filter with the given <macaddr> and VLAN of <vlanid> . The <[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-120 v1.0, November 2010 macfilter adddest all This command adds all interfaces to the destination filter set for the MAC filter with the given <macaddr> and VLAN of <vlanid> . The <macaddr> parameter must be specified as a 6- byte hexad[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-121 v1.0, November 2010 no macfilter addsrc This command removes a port from the source filter set for the MAC filter with the MAC address of <macaddr> and VLAN of <vlanid> . The < macaddr > parameter must be specified as a 6- byte hexa[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-122 v1.0, November 2010 show mac-address-table static This command displays the Static MAC Filtering information for all Static MAC Filters. If you select <all> , all the Static MAC Filters in the system are displayed. If you supply a value for <[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-123 v1.0, November 2010 DHCP Snooping Configuration Commands This section describes commands you use to configure DHCP Snooping. ip dhcp snooping Use this command to enable DHCP Snooping globally. no ip dhcp snooping Use this command to disable DHCP Snoo[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-124 v1.0, November 2010 no ip dhcp snooping vlan Use this command to disable DHCP Snooping on VLANs. ip dhcp snooping verify mac-address Use this command to enable verification of the source MAC address with the client hardware address in the received DC[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-125 v1.0, November 2010 ip dhcp snooping database write-delay Use this command to configure the interval in seconds at which the DHCP Snooping database will be persisted. The interval value ranges from 15 to 86400 seconds. no ip dhcp snooping database wr[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-126 v1.0, November 2010 no ip verify binding Use this command to remove the IPSG static entry from the IPSG database. ip dhcp snooping limit Use this command to control the rate at which the DHCP Snooping messages come. The default rate is 15 pps with a [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-127 v1.0, November 2010 ip dhcp snooping log-invalid Use this command to control the logging DHCP messages filtration by the DHCP Snooping application. no ip dhcp snooping log-invalid Use this command to disable the logging DHCP messages filtration by th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-128 v1.0, November 2010 ip verify source Use this command to configure the IPSG source ID attribute to filter the data traffic in the hardware. Source ID is the combination of IP address and MAC address. Normal command allows data traffic filtration base[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-129 v1.0, November 2010 Example: The following shows example CLI display output for the command. (switch) #show ip dhcp snooping DHCP snooping is Disabled DHCP snooping source MAC verification is enabled DHCP snooping is enabled on the following VLANs: 1[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-130 v1.0, November 2010 Example: The following shows example CLI display output for the command. (switch) #show ip dhcp snooping binding Total number of bindings: 2 MAC Address IP Address VLAN Interface Type Lease (Secs) ------------------ ------------ -[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-131 v1.0, November 2010 show ip dhcp snooping statistics Use this command to list statistics for DHCP Snooping security violations on untrusted ports. Example: The following shows example CLI display output for the command. (switch) #show ip dhcp snoopin[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-132 v1.0, November 2010 1/0/20 0 0 0 clear ip dhcp snooping binding Use this command to clear all DHCP Snooping bindings on all interfaces or on a specific interface. clear ip dhcp snooping statistics Use this command to clear all DHCP Snooping statistic[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-133 v1.0, November 2010 Example: The following shows example CLI display output for the command. (switch) #show ip verify source Interface Filter Type IP Address MAC Address Vlan --------- ----------- --------------- ----------------- ----- 0/1 ip-mac 21[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-134 v1.0, November 2010 00:00:00:00:00:08 1.2.3.4 dhcp-snooping 2 1/0/1 00:00:00:00:00:09 1.2.3.4 dhcp-snooping 3 1/0/1 00:00:00:00:00:0A 1.2.3.4 dhcp-snooping 4 1/0/1 Dynamic ARP Inspection Commands Dynamic ARP Inspection (DAI) is a security feature tha[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-135 v1.0, November 2010 ip arp inspection validate Use this command to enable additional validation checks like source-mac validation, destination- mac validation, and ip address validation on the received ARP packets. Each command overrides the configur[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-136 v1.0, November 2010 ip arp inspection trust Use this command to configure an interface as trusted for Dynamic ARP Inspection. no ip arp inspection trust Use this command to configure an interface as untrusted for Dynamic ARP Inspection. ip arp inspec[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-137 v1.0, November 2010 no ip arp inspection limit Use this command to set the rate limit and burst interval values for an interface to the default values of 15 pps and 1 second, respectively. ip arp inspection filter Use this command to configure the AR[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-138 v1.0, November 2010 no arp access-list Use this command to delete a configured ARP ACL. permit ip host mac host Use this command to configure a rule for a valid IP address and MAC address combination used in ARP packet validation. no permit ip host m[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-139 v1.0, November 2010 Example: The following shows example CLI display output for the command. (Switch) #show ip arp inspection vlan 10-12 Source Mac Validation : Disabled Destination Mac Validation : Disabled IP Address Validation : Disabled Vlan Conf[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-140 v1.0, November 2010 Exam ple: Th e follow ing sho ws exam ple CLI d ispla y output f or the co mmand show ip arp inspection statistics which lists the summary of forwarded and dropped ARP packets on all DAI-enabled VLANs. VLAN Forwarded Dropped ---- [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-141 v1.0, November 2010 show ip arp inspection interfaces Use this command to display the Dynamic ARP Inspection configuration on all the DAI-enabled interfaces. An interface is said to be enabled for DAI if at least one VLAN, that the interface is a mem[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-142 v1.0, November 2010 Example: The following shows example CLI display output for the command. (Switch) #show arp access-list ARP access list H2 permit ip host 1.1.1.1 mac host 00:01:02:03:04:05 permit ip host 1.1.1.2 mac host 00:03:04:05:06:07 ARP acc[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-143 v1.0, November 2010 • Flooding of unregistered multicast data packets to all ports in the VLAN. no set igmp This command disables IGMP Snooping on the system, an interface or a VLAN. set igmp interfacemode This command enables IGMP Snooping on all [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-144 v1.0, November 2010 no set igmp interfacemode This command disables IGMP Snooping on all interfaces. set igmp fast-leave This command enables or disables IGMP Snooping fast-leave admin mode on a selected interface or VLAN. Enabling fast-leave allows [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-145 v1.0, November 2010 set igmp groupmembership-interval This command sets the IGMP Group Membership Interval time on a VLAN, one interface or all interfaces. The Group Membership Interval time is the amount of time in seconds that a switch waits for a [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-146 v1.0, November 2010 no set igmp maxresponse This command sets the max response time (on the interface or VLAN) to the default value. set igmp mcrtrexpiretime This command sets the Multicast Router Present Expiration time. The time is set for the syst[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-147 v1.0, November 2010 no set igmp mcrtrexpiretime This command sets the Multicast Router Present Expiration time to 0. The time is set for the system, on a particular interface or a VLAN. set igmp mrouter This command configures the VLAN ID ( < vlan[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-148 v1.0, November 2010 no set igmp mrouter interface This command disables the status of the interface as a statically configured multicast router interface. ip igmpsnooping unknown-multicast This command enables the filtering of unknown multicast packe[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-149 v1.0, November 2010 When the optional arguments <unit/slot/port > or <vlan_id> are not used, the command displays the following information: When you specify the <unit/slot/port > values, the following information appears: When you [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-150 v1.0, November 2010 show igmpsnooping mrouter interface This command displays information about statically configured ports. show igmpsnooping mrouter vlan This command displays information about statically configured ports. Group Membership Interval[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-151 v1.0, November 2010 show mac-address-table igmpsnooping This command displays the IGMP Snooping entries in the MFDB table. IGMP Snooping Querier Commands IGMP Snooping requires that one central switch or router periodically query all end-devices on t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-152 v1.0, November 2010 If a VLAN has IGMP Snooping Querier enabled and IGMP Snooping is operationally disabled on it, IGMP Snooping Querier functionality is disabled on that VLAN. IGMP Snooping functionality is re-enabled if IGMP Snooping is operational[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-153 v1.0, November 2010 no set igmp querier query-interval Use this command to set the IGMP Querier Query Interval time to its default value. set igmp querier timer expiry Use this command to set the IGMP Querier timer expiration period. It is the time p[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-154 v1.0, November 2010 no set igmp querier version Use this command to set the IGMP Querier version to its default value. set igmp querier election participate Use this command to enable the Snooping Querier to participate in the Querier Election proces[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-155 v1.0, November 2010 When the optional argument < vlanid > is not used, the command displays the following information. When you specify a value for < vlanid >, the following additional information appears. When the optional argument detai[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-156 v1.0, November 2010 Default disabled Format set mld Mode Global Config Interface Config Format no set mld <vlanid> Mode VLAN Mode Default disabled Format set mld fast-leave <vlanid> Mode • VLAN Mode Format no set mld fast-leave <vlan[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-157 v1.0, November 2010 Port Security Commands This section describes the command you use to configure Port Security on the switch. Port security, which is also known as port MAC locking, allows you to secure the network by locking allowable MAC addresse[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-158 v1.0, November 2010 no port-security This command disables port locking for one (Interface Config) or all (Global Config) ports. port-security max-dynamic This command sets the maximum number of dynamically locked MAC addresses allowed on a specific [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-159 v1.0, November 2010 no port-security max-static This command sets maximum number of statically locked MAC addresses to the default value. port-security mac-address This command adds a MAC address to the list of statically locked MAC addresses. The &l[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-160 v1.0, November 2010 show port-security This command displays the port-security settings. If you do not use a parameter, the command displays the settings for the entire system. Use the optional parameters to display the settings on a specific interfa[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-161 v1.0, November 2010 show port-security static This command displays the statically locked MAC addresses for port. show port-security violation This command displays the source MAC address of the last packet discarded on a locked port. LLDP (802.1AB) [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-162 v1.0, November 2010 no lldp transmit Use this command to return the local data transmission capability to the default. lldp receive Use this command to enable the LLDP receive capability. no lldp receive Use this command to return the reception of LL[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-163 v1.0, November 2010 no lldp timers Use this command to return any or all timing parameters for local data transmission on ports enabled for LLDP to the default values. lldp transmit-tlv Use this command to specify which optional type length values (T[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-164 v1.0, November 2010 lldp transmit-mgmt Use this command to include transmission of the local system management address information in the LLDPDUs. no lldp transmit-mgmt Use this command to include transmission of the local system management address i[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-165 v1.0, November 2010 lldp notification-interval Use this command to configure how frequently the system sends remote data change notifications. The <interval> parameter is the number of seconds to wait between sending notifications. The valid in[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-166 v1.0, November 2010 show lldp Use this command to display a summary of the current LLDP configuration. show lldp interface Use this command to display a summary of the current LLDP configuration for a specific interface or for all interfaces. Format [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-167 v1.0, November 2010 show lldp statistics Use this command to display the current LLDP traffic and remote table statistics for a specific interface or for all interfaces. The table contains the following column headings: Format show lldp statistics {&[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-168 v1.0, November 2010 show lldp remote-device Use this command to display summary information about remote devices that transmit current LLDP data to the system. You can show information about LLDP remote data received on all ports or on a specific por[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-169 v1.0, November 2010 (switch) #show lldp remote-device all LLDP Remote Device Summary Local Interface RemID Chassis ID Port ID System Name ------- ------- -------------------- ------------------ ------------------ 0/1 0/2 0/3 0/4 0/5 0/6 0/7 2 00:FC:E[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-170 v1.0, November 2010 Example: The following shows example CLI display output for the command. (Switch) #show lldp remote-device detail 0/7 LLDP Remote Device Detail Local Interface: 0/7 Remote Identifier: 2 Chassis ID Subtype: MAC Address Chassis ID: [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-171 v1.0, November 2010 show lldp local-device Use this command to display summary information about the advertised LLDP local data. This command can display summary information or detail for each interface. show lldp local-device detail Use this command[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-172 v1.0, November 2010 LLDP-MED Commands Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057) provides an extension to the LLDP standard. Specifically, LLDP-MED provides extensions for network configuration and policy, dev[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-173 v1.0, November 2010 lldp med confignotification Use this command to configure all the ports to send the topology change notification. no ldp med confignotification Use this command to disable notifications. lldp med transmit-tlv Use this command to s[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-174 v1.0, November 2010 no lldp med transmit-tlv Use this command to remove a TLV. lldp med all Use this command to configure LLDP-MED on all the ports no lldp med all Use this command to remove LLDP-MD on all ports. lldp med confignotification all Use t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-175 v1.0, November 2010 lldp med faststartrepeatcount Use this command to set the value of the fast start repeat count. [count] is the number of LLDP PDUs that will be transmitted when the product is enabled. The range is 1 to 10. no lldp med faststartre[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-176 v1.0, November 2010 no lldp med transmit-tlv Use this command to remove a TLV. show lldp med Use this command to display a summary of the current LLDP MED configuration. Example: The following shows example CLI display output for the command. (switch[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-177 v1.0, November 2010 show lldp med interface Use this command to display a summary of the current LLDP MED configuration for a specific interface. <unit/slot/port> indicates a specific physical interface. all indicates all valid LLDP interfaces.[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-178 v1.0, November 2010 TLV Codes: 0- Capabilities, 1- Network Policy 2- Location, 3- Extended PSE 4- Extended Pd, 5- Inventory --More-- or (q)uit (Switch) #show lldp med interface 1/0/2 Interface Link configMED operMED ConfigNotify TLVsTx --------- ----[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-179 v1.0, November 2010 Example: The following shows example CLI display output for the command. (Switch) #show lldp med local-device detail 1/0/8 LLDP MED Local Device Detail Interface: 1/0/8 Network Policies Media Policy Application Type : voice Vlan I[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-180 v1.0, November 2010 Source: local Priority: low show lldp med remote-device This command displays summary information about remote devices that transmit current LLDP MED data to the system. You can show information about LLDP remote data received on [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-181 v1.0, November 2010 show lldp med remote-device detail Use this command to display detailed information about remote devices that transmit current LLDP MED data to an interface on the system. Format show lldp med remote-device detail <unit/slot/po[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-182 v1.0, November 2010 Example: The following shows example CLI display output for the command. (Switch) #show lldp med remote-device detail 1/0/8 LLDP MED Remote Device Detail Local Interface: 1/0/8 Remote Identifier: 18 Capabilities MED Capabilities S[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-183 v1.0, November 2010 Software Rev: xxx xxx xxx Serial Num: xxx xxx xxx Mfg Name: xxx xxx xxx Model Name: xxx xxx xxx Asset ID: xxx xxx xxx Location Subtype: elin Info: xxx xxx xxx Extended POE Device Type: pseDevice Extended POE PSE Available: 0.3 Wat[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-184 v1.0, November 2010 dos-control all This command enables Denial of Service protection checks globally. no dos-control all This command disables Denial of Service prevention checks globally. dos-control sipdip This command enables Source IP address = [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-185 v1.0, November 2010 dos-control firstfrag This command enables Minimum TCP Header Size Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress having a TCP Header Size s[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-186 v1.0, November 2010 dos-control tcpflag This command enables TCP Flag Denial of Service protections. If the mode is enabled, Denial of Service prevention is active for this type of attacks. If packets ingress having TCP Flag SYN set and a source port[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-187 v1.0, November 2010 no dos-control l4port This command disables L4 Port Denial of Service protections. dos-control icmp This command enables Maximum ICMP Packet Size Denial of Service protections. If the mode is enabled, Denial of Service prevention [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-188 v1.0, November 2010 no dos-control smacdmac This command disables Source MAC address = Destination MAC address (SMAC=DMAC) Denial of Service protection. dos-control tcpport This command enables TCP L4 source = destination port number (Source TCP Port[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-189 v1.0, November 2010 no dos-control udpport This command disables UDP L4 source = destination port number (Source UDP Port =Destination UDP Port) Denial of Service protection. dos-control tcpflagseq This command enables TCP Flag and Sequence Denial of[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-190 v1.0, November 2010 dos-control tcpoffset This command enables TCP Offset Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress having TCP Header Offset equal to one ([...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-191 v1.0, November 2010 dos-control tcpsynfin This command enables TCP SYN and FIN Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress having TCP flags SYN and FIN set, [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-192 v1.0, November 2010 dos-control icmpv4 dos-control icmpv4 This command enables Maximum ICMPv4 Packet Size Denial of Service protections. If the mode is enabled, Denial of Service prevention is active for this type of attack. If ICMPv4 Echo Request (P[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-193 v1.0, November 2010 no dos-control icmpv6 This command disables Maximum ICMP Packet Size Denial of Service protections. dos-control icmpfrag This command enables ICMP Fragment Denial of Service protection. If the mode is enabled, Denial of Service pr[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-194 v1.0, November 2010 Note: Not all messages below are available in all 7000series managed switches. Term Definition First Fragment Mode May be enabled or disabled. The factory default is disabled. Min TCP Hdr Size <0-255> The factory default is [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-195 v1.0, November 2010 MAC Database Commands This section describes the commands you use to configure and view information about the MAC databases. bridge aging-time This command configures the forwarding database address aging timeout in seconds. The &[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-196 v1.0, November 2010 show mac-address-table multicast This command displays the Multicast Forwarding Database (MFDB) information. If you enter the command with no parameter, the entire table is displayed. You can display the table entry for one MAC Ad[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-197 v1.0, November 2010 ISDP Commands This section describes the commands you use to configure the industry standard Discovery Protocol (ISDP). isdp run This command enables ISDP on the switch. no isdp run This command disables ISDP on the switch. isdp h[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-198 v1.0, November 2010 isdp timer This command sets the period of time between sending new ISDP packets. The range is given in seconds. isdp advertise-v2 This command enables the sending of ISDP version 2 packets from the device. no isdp advertise-v2 Th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-199 v1.0, November 2010 no isdp enable This command disables ISDP on the interface. clear isdp counters This command clears ISDP counters. clear isdp table This command clears entries in the ISDP table. show isdp This command displays global ISDP setting[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-200 v1.0, November 2010 show isdp interface This command displays ISDP settings for the specified interface. show isdp entry This command displays ISDP entries. If the device id is specified, then only entries for that device are shown. Device ID The Dev[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-201 v1.0, November 2010 show isdp neighbors This command displays the list of neighboring devices. Term Definition Device ID The device ID associated with the neighbor which advertised the information. IP Addresses The IP address(es) associated with the [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-202 v1.0, November 2010 Example: The following shows example CLI display output for the command. (Switch) #show isdp neighbors detail Device ID 0001f45f1bc0 Address(es): IP Address: 10.27.7.57 Capability Router Trans Bridge Switch IGMP Platform SecureSta[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-203 v1.0, November 2010 debug isdp packet This command enables tracing of ISDP packets processed by the switch. ISDP must be enabled on both the device and the interface in order to monitor packets for a particular interface. no debug isdp packet This co[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-204 v1.0, November 2010 To enable priority-based flow control for a particular CoS value on an interface: • Ensure that VLAN tagging is enabled on the interface so that the 802.1p priority values are carried through the network. • Ensure that 802.1p [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Switching Commands 3-205 v1.0, November 2010 VLAN tagging must be enabled to carry the 802.1p value through the network. The number of lossless priorities supported on XSM7224S is 2. Additionally, the mapping of class-of-service levels to 802.1p priority values to must be se[...]

4-1 v1.0, November 2010 Chapter 4 Routing Commands This chapter describes the routing commands available in the 7000 series CLI. The Routing Commands chapter contains the following sections: • “Address Resolution Protocol (ARP) Commands” on page 4-1 • “IP Routing Commands” on page 4-8 • “Virtual LAN Routing Commands” on page 4-20 [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-2 v1.0, November 2010 The format of the MAC address is 6 two-digit hexadecimal numbers that are separated by colons, for example 00:06:29:32:81:40. no arp This command deletes an ARP entry. The value for <arpentry> is the IP address of the interface.[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-3 v1.0, November 2010 arp cachesize This command configures the ARP cache size. The ARP cache size value is a platform specific integer value. The default size also varies depending on the platform. no arp cachesize This command configures the default ARP [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-4 v1.0, November 2010 arp purge This command causes the specified IP address to be removed from the ARP cache. Only entries of type dynamic or gateway are affected by this command. arp resptime This command configures the ARP request response timeout. The [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-5 v1.0, November 2010 no arp retries This command configures the default ARP count of maximum request for retries. arp timeout This command configures the ARP entry ageout time. The value for <seconds> is a valid positive integer, which represents th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-6 v1.0, November 2010 clear arp-switch Use this command to clear the contents of the switch’s Address Resolution Protocol (ARP) table that contains entries learned through the Management port. To observe whether this command is successful, ping from the [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-7 v1.0, November 2010 show arp brief This command displays the brief Address Resolution Protocol (ARP) table information. show arp switch This command displays the contents of the switch’s Address Resolution Protocol (ARP) table. MAC Address The hardware[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-8 v1.0, November 2010 IP Routing Commands This section describes the commands you use to enable and configure IP routing on the switch. routing This command enables IPv4 and IPv6 routing for an interface. You can view the current value for this function wi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-9 v1.0, November 2010 no ip routing This command disables the IP Router Admin Mode for the master switch. ip address This command configures an IP address on an interface. You can also use this command to configure one or more secondary IP addresses on the[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-10 v1.0, November 2010 entered into the forwarding database. By specifying the preference of a static route, you control whether a static route is more or less preferred than routes from dynamic routing protocols. The preference also controls whether a sta[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-11 v1.0, November 2010 no ip route default This command deletes all configured default routes. If the optional <nexthopip> parameter is designated, the specific next hop is deleted from the configured default route and if the optional preference valu[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-12 v1.0, November 2010 no ip netdirbcast This command disables the forwarding of network-directed broadcasts. When disabled, network directed broadcasts are dropped. ip mtu This command sets the IP Maximum Transmission Unit (MTU) on a routing interface. Th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-13 v1.0, November 2010 no ip mtu This command resets the ip mtu to the default value. encapsulation This command configures the link layer encapsulation type for the packet. The encapsulation type can be ethernet or snap . clear ip route all This command r[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-14 v1.0, November 2010 The following shows example CLI display output for the command. (Switch) #show ip brief Default Time to Live........................... 64 Routing Mode................................... Disabled Maximum Next Hops....................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-15 v1.0, November 2010 The following shows example CLI display output for the command. (switch)#show ip interface 1/0/2 Routing Interface Status....................... Down Primary IP Address............................. 1.2.3.4/255.255.255.0 Secondary IP [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-16 v1.0, November 2010 Routing Mode................................... Disable Administrative Mode............................ Enable Forward Net Directed Broadcasts................ Disable Proxy ARP...................................... Enable Local Proxy[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-17 v1.0, November 2010 prefixes keyword, the <ip-address> and <mask> pair becomes the prefix, and the command displays the routes to the addresses that match that prefix. Use the <protocol> parameter to specify the protocol that installed[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-18 v1.0, November 2010 To administratively control the traffic destined to a particular network and prevent it from being forwarded through the router, you can configure a static reject route on the router. Such traffic would be discarded and the ICMP dest[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-19 v1.0, November 2010 The following shows example CLI display output for the command. (Switch) #show ip route summary Connected Routes..............................1 Static Routes.................................7 RIP Routes...............................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-20 v1.0, November 2010 show ip stats This command displays IP statistical information. Refer to RFC 1213 for more information about the fields that are displayed. Virtual LAN Routing Commands This section describes the commands you use to view and configur[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-21 v1.0, November 2010 show ip vlan This command displays the VLAN routing information for all VLANs with routing enabled. DHCP and BOOTP Relay Commands This section describes the commands you use to configure BootP/DHCP Relay on the switch. A DHCP relay a[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-22 v1.0, November 2010 no bootpdhcprelay cidoptmode This command disables the circuit ID option mode for BootP/DHCP Relay on the system. bootpdhcprelay maxhopcount This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the s[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-23 v1.0, November 2010 no bootpdhcprelay minwaittime This command configures the default minimum wait time in seconds for BootP/DHCP Relay on the system. show bootpdhcprelay This command displays the BootP/DHCP Relay information. Format no bootpdhcprelay m[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-24 v1.0, November 2010 IP Helper Commands This section describes the commands to configure a DHCP relay agent with multiple DHCP server addresses per routing interface, and to use different server addresses for client packets arriving on different interfac[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-25 v1.0, November 2010 ip helper-address Use this command to add a unicast helper address to the list of helper addresses on an interface. This is the address of a DHCP server. This command can be applied multiple times on the routing interface to form the[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-26 v1.0, November 2010 no ip helper-address discard Use this command to permit the matching packets. show ip helper-address Use this command to display the configured helper addresses on the given interface. The following shows example CLI display output f[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-27 v1.0, November 2010 no ip unreachables Use this command to prevent the generation of ICMP Destination Unreachable messages. ip redirects Use this command to enable the generation of ICMP Redirect messages by the router. By default, the generation of ICM[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Routing Commands 4-28 v1.0, November 2010 no ip icmp echo-reply Use this command to prevent the generation of ICMP Echo Reply messages by the router. ip icmp error-interval Use this command to limit the rate at which IPv4 ICMP error messages are sent. The rate limit is confi[...]

5-1 v1.0, November 2010 Chapter 5 Quality of Service (QoS) Commands This chapter describes the Quality of Service (QoS) commands available in the managed switch CLI. The QoS Commands chapter contains the following sections: • “Class of Service (CoS) Commands” on page 5-2 • “Differentiated Services (DiffServ) Commands” on page 5-9 • ?[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-2 v1.0, November 2010 Class of Service (CoS) Commands This section describes the commands you use to configure and view Class of Service (CoS) settings for the switch. The commands in this section allow you to control the priority and tran[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-3 v1.0, November 2010 The <trafficclass> values can range from 0-6, although the actual number of available traffic classes depends on the platform. no classofservice ip-dscp-mapping This command maps each IP DSCP value to its defaul[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-4 v1.0, November 2010 cos-queue min-bandwidth This command specifies the minimum transmission bandwidth guarantee for each interface queue. The total number of queues supported per interface is platform specific. A value from 0-100 (percen[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-5 v1.0, November 2010 cos-queue random-detect This command activates weighted random early discard (WRED) for each specified queue on the interface. Specific WRED parameters are configured using the randomdetect queue-parms and the random-[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-6 v1.0, November 2010 The last precedence applies to all non-TCP traffic. For example, in a 3-color system, four of each parameter specified: green TCP, yellow TCP, red TCP, and non-TCP, respectively. no random-detect queue-parms Use this [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-7 v1.0, November 2010 show classofservice dot1p-mapping This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a specific interface. The <unit/slot/port> parameter is optional and is only va[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-8 v1.0, November 2010 show classofservice ip-dscp-mapping This command displays the current IP DSCP mapping to internal traffic classes for the global configuration settings. The following information is repeated for each user priority. sh[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-9 v1.0, November 2010 show interfaces cos-queue This command displays the class-of-service queue configuration for the specified interface. The unit/slot/port parameter is optional and is only valid on platforms that support independent pe[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-10 v1.0, November 2010 a. Creating and deleting classes. b. Defining match criteria for a class. 2. Policy a. Creating and deleting policies b. Associating classes with a policy c. Defining policy statements for a policy/class combination [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-11 v1.0, November 2010 diffserv This command sets the DiffServ operational mode to active. While disabled, the DiffServ configuration is retained and can be changed, but it is not activated. When enabled, DiffServ services are activated. n[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-12 v1.0, November 2010 class-map This command defines a DiffServ class of type match-all. When used without any match condition, this command enters the class-map mode. The <class-map-name> is a case sensitive alphanumeric string fro[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-13 v1.0, November 2010 class-map rename This command changes the name of a DiffServ class. The <class-map-name> is the name of an existing DiffServ class. The <new-class-map-name> parameter is a case-sensitive alphanumeric stri[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-14 v1.0, November 2010 match class-map This command adds to the specified class definition the set of match conditions defined for another class. The <refclassname> is the name of an existing DiffServ class whose match conditions are[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-15 v1.0, November 2010 match cos This command adds to the specified class definition a match condition for the Class of Service value (the only tag in a single tagged packet or the first or outer 802.1Q tag of a double VLAN tagged packet).[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-16 v1.0, November 2010 match dstip This command adds to the specified class definition a match condition based on the destination IP address of a packet. The <ipaddr> parameter specifies an IP address. The <ipmask> parameter sp[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-17 v1.0, November 2010 match ip dscp This command adds to the specified class definition a match condition based on the value of the IP DiffServ Code Point (DSCP) field in a packet, which is defined as the high-order six bits of the Servic[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-18 v1.0, November 2010 match ip tos This command adds to the specified class definition a match condition based on the value of the IP TOS field in a packet, which is defined as all eight bits of the Service Type octet in the IP header. Th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-19 v1.0, November 2010 match source-address mac This command adds to the specified class definition a match condition based on the source MAC address of a packet. The <address > parameter is any layer 2 MAC address formatted as six, [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-20 v1.0, November 2010 match srcl4port This command adds to the specified class definition a match condition based on the source layer 4 port of a packet using a single keyword or numeric notation. To specify the match condition as a singl[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-21 v1.0, November 2010 assign-queue This command modifies the queue id to which the associated traffic stream is assigned. The queueid is an integer from 0 to n -1, where n is the number of egress queues supported by the device. drop This [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-22 v1.0, November 2010 conform-color Use this command to enable color-aware traffic policing and define the conform-color class map. Used in conjunction with the police command where the fields for the conform level are specified. The <[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-23 v1.0, November 2010 no class This command deletes the instance of a particular class and its defined treatment from the specified policy. <classname> is the names of an existing DiffServ class. mark cos This command marks all pack[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-24 v1.0, November 2010 mark ip-precedence This command marks all packets for the associated traffic stream with the specified IP Precedence value. The IP Precedence value is an integer from 0 to 7. police-simple This command is used to est[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-25 v1.0, November 2010 policy-map This command establishes a new DiffServ policy. The <policyname> parameter is a case- sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of policy is spec[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-26 v1.0, November 2010 The service commands attach a defined policy to a directional interface. You can assign only one policy at any one time to an interface in the inbound direction. DiffServ is not used in the outbound direction. This s[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-27 v1.0, November 2010 no service-policy This command detaches a policy from an interface in the inbound direction. The <policyname> parameter is the name of an existing DiffServ policy. DiffServ Show Commands Use the DiffServ show c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-28 v1.0, November 2010 If you do not specify the Class Name, this command displays a list of all defined DiffServ classes. The following fields are displayed: show diffserv This command displays the DiffServ General Status Group informatio[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-29 v1.0, November 2010 show policy-map This command displays all configuration information for the specified policy. The <policyname> is the name of an existing DiffServ policy. If the Policy Name is specified the following fields ar[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-30 v1.0, November 2010 If the Policy Name is not specified this command displays a list of all defined DiffServ policies. The following fields are displayed: Conform COS The CoS mark value if the conform action is set-cos-transmit. Conform[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-31 v1.0, November 2010 show diffserv service This command displays policy service information for the specified interface and direction. The <unit/slot/port> parameter specifies a valid unit/slot/port number for the system. show diff[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-32 v1.0, November 2010 The following information is repeated for interface and direction (only those interfaces configured with an attached policy are shown): show policy-map interface This command displays policy-oriented statistics infor[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-33 v1.0, November 2010 show service-policy This command displays a summary of policy-oriented statistics information for all interfaces in the specified direction. The following information is repeated for each interface and direction (onl[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-34 v1.0, November 2010 If a MAC ACL by this name already exists, this command enters Mac-Access-List config mode to allow updating the existing MAC ACL. no mac access-list extended This command deletes a MAC ACL identified by <name> [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-35 v1.0, November 2010 A rule may either deny or permit traffic according to the specified classification fields. At a minimum, the source and destination MAC value must be specified, each of which may be substituted using the keyword any [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-36 v1.0, November 2010 The assign-queue parameter allows specification of a particular hardware queue for handling traffic that matches this rule. The allowed <queue-id> value is 0-(n-1), where n is the number of user configurable qu[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-37 v1.0, November 2010 no mac access-group This command removes a MAC ACL identified by <name> from the interface in a given direction. show mac access-lists This command displays a MAC access list and all of the rules that are defin[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-38 v1.0, November 2010 IP Access Control List (ACL) Commands This section describes the commands you use to configure IP ACL settings. IP ACLs ensure that only authorized users have access to specific resources and block any unwarranted at[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-39 v1.0, November 2010 IP Extended ACL: Format access-list <100-199> {deny | permit} {every | {{icmp | igmp | ip | tcp | udp | <number>} <srcip> <srcmask>[{eq {<portkey> | <0-65535>} <dstip> <ds[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-40 v1.0, November 2010 no access-list This command deletes an IP ACL that is identified by the parameter < accesslistnumber> from the system. The range for < accesslistnumber> 1-99 for standard access lists and 100- 199 for ext[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-41 v1.0, November 2010 ip access-list rename This command changes the name of an IP Access Control List (ACL). The < name > parameter is the names of an existing IP ACL. The <new name > parameter is a case-sensitive alphanumeri[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-42 v1.0, November 2010 The assign-queue parameter allows specification of a particular hardware queue for handling traffic that matches this rule. The allowed <queue-id> value is 0-(n-1), where n is the number of user configurable qu[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-43 v1.0, November 2010 no ip access-group This command removes a specified IP ACL from an interface. acl-trapflags This command enables the ACL trap mode. no acl-trapflags This command disables the ACL trap mode. show ip access-lists This [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-44 v1.0, November 2010 show access-lists This command displays IP ACLs, IPv6 ACLs, and MAC access control lists information for a designated interface and direction. Term Definition Rule Number The number identifier for each rule that is d[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-45 v1.0, November 2010 IPv6 Access Control List (ACL) Commands This section describes the commands you use to configure IPv6 ACL settings. IPv6 ACLs ensure that only authorized users have access to specific resources and block any unwarran[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-46 v1.0, November 2010 no ipv6 access-list This command deletes the IPv6 ACL identified by <name> from the system. ipv6 access-list rename This command changes the name of an IPv6 ACL. The <name> parameter is the name of an exi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-47 v1.0, November 2010 The assign-queue parameter allows specification of a particular hardware queue for handling traffic that matches this rule. The allowed <queue-id> value is 0-(n-1), where n is the number of user configurable qu[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-48 v1.0, November 2010 no ipv6 traffic-filter This command removes an IPv6 ACL identified by <name> from the interface(s) in a given direction. show ipv6 access-lists This command displays an IPv6 access list and all of the rules tha[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-49 v1.0, November 2010 Auto-Voice over IP Commands This section describes the commands you use to configure Auto-Voice over IP (VoIP) commands. The Auto-VoIP feature explicitly matches VoIP streams in Ethernet switches and provides them wi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Quality of Service (QoS) Commands 5-50 v1.0, November 2010 auto-voip Use this command to enable VoIP Profile on the interface. no auto-voip Use this command to disable VoIP Profile on the interface. show auto-voip Use this command to display the VoIP Profile settings on the [...]

6-1 v1.0, November 2010 Chapter 6 Utility Commands This chapter describes the utility commands available in the CLI. The Utility Commands chapter includes the following sections: • “Auto Install Commands” on page 6-2 • “Dual Image Commands” on page 6-4 • “System Information and Statistics Commands” on page 6-6 • “Logging Comma[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-2 v1.0, November 2010 Auto Install Commands This section describes the Auto Install Commands. Auto Install is a software feature which provides for the configuration of a switch automatically when the device is initialized and no configuration file is foun[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-3 v1.0, November 2010 boot autoinstall auto-save This command is used to enable automatically saving the downloaded configuration on the switch. . no boot autoinstall auto-save This command is used to disable automatically saving the downloaded configurati[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-4 v1.0, November 2010 boot autoinstall retry-count This command is used to set the number of attempts to download a configuration. The valid range is from 1 to 6. no boot autoinstall retry-count This command is used to reset the number to the default. The [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-5 v1.0, November 2010 boot system This command activates the specified image. It will be the active-image for subsequent reboots and will be loaded by the boot loader. The current active-image is marked as the backup-image for subsequent reboots. The optio[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-6 v1.0, November 2010 update bootcode This command updates the bootcode (boot loader) on the switch. The bootcode is read from the active-image for subsequent reboots.The optional <unit> parameter is valid only on Stacks. Error will be returned, if t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-7 v1.0, November 2010 show eventlog This command displays the event log, which contains error messages from the system. The event log is not cleared on a system reset. The <unit> is the switch identifier. show hardware This command displays inventory[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-8 v1.0, November 2010 show version This command displays inventory information for the switch. show interface This command displays a summary of statistics for a specific interface or a count of all CPU traffic based upon the argument. Note: The show versi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-9 v1.0, November 2010 The display parameters, when the argument is <unit/slot/port> , are as follows: The display parameters, when the argument is “switchport” are as follows: Parameters Definition Packets Received Without Error The total number [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-10 v1.0, November 2010 show interface ethernet This command displays detailed statistics for a specific interface or for all CPU traffic based upon the argument. When you specify a value for <unit/slot/port> , the command displays the following infor[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-11 v1.0, November 2010 show mac-addr-table This command displays the forwarding database entries. These entries are used by the transparent bridging function to determine how to forward a received frame. Octets Transmitted The total number of octets transm[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-12 v1.0, November 2010 Enter all or no parameter to display the entire table. Enter a MAC Address and VLAN ID to display the table entry for the requested MAC address on the specified VLAN. Enter the count parameter to view summary information about the fo[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-13 v1.0, November 2010 If you enter the interface <unit/slot/port> parameter, in addition to the MAC Address and Status fields, the following field appears: The following information displays if you enter the count parameter: show process cpu This co[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-14 v1.0, November 2010 ------ ---------- free 192980480 alloc 53409968 Task Utilization Report Task Utilization ----------------------- ----------- bcmL2X.0 0.75% bcmCNTR.0 0.20% bcmLINK.0 0.35% DHCP snoop 0.10% Dynamic ARP Inspection 0.10% dot1s_timer_tas[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-15 v1.0, November 2010 show running-config Use this command to display or capture the current setting of different protocol packages supported on the switch. This command displays or captures commands with settings and configurations that differ from the d[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-16 v1.0, November 2010 show running-config interface This command shows the current configuration on a particular interface. The interface could be a physical port or a virtual port—like a LAG or VLAN. The output captures how the configuration differs fr[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-17 v1.0, November 2010 • show port all • show isdp neighbors • show logging • show event log • show logging buffered • show trap log terminal length Use this command to set the number of lines of output to be displayed on the screen, i.e. pagin[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-18 v1.0, November 2010 show terminal length Use this command to display the value of the user-configured terminal length size. Logging Commands This section describes the commands you use to configure system logging, and to view logs and the logging settin[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-19 v1.0, November 2010 no logging buffered wrap This command disables wrapping of in-memory logging and configures logging to stop when the log file capacity is full. logging cli-command This command enables the CLI command logging feature, which enables t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-20 v1.0, November 2010 no logging console This command disables logging to the console. logging host This command enables logging to a host. You can configure up to eight hosts. The <ipaddr|hostname> is the IP address of the logging host. The <add[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-21 v1.0, November 2010 no logging syslog This command disables syslog logging. show logging This command displays logging configuration information. show logging buffered This command displays buffered logging (system startup and system operation logs). Fo[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-22 v1.0, November 2010 show logging hosts This command displays all configured logging hosts. The <unit> is the switch identifier and has a range of 1-8. show logging traplogs This command displays SNMP trap events and statistics. Term Definition Buf[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-23 v1.0, November 2010 logging persistent Use this command to configure the Persistent logging for the switch. The severity level of logging messages is specified at severity level. Possible values for severity level are (emergency|0, alert|1, critical|2, [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-24 v1.0, November 2010 traceroute Use the traceroute command to discover the routes that packets actually take when traveling to their destination through the network on a hop-by-hop basis. Traceroute continues to provide a synchronous response when initia[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-25 v1.0, November 2010 Example: The following are examples of the CLI command. traceroute Success: (Switch) # traceroute 10.240.10.115 initTtl 1 maxTtl 4 maxFail 0 interval 1 count 3 port 33434 size 43 Traceroute to 10.240.10.115 ,4 hops max 43 byte packet[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-26 v1.0, November 2010 clear config This command resets the configuration to the factory defaults without powering off the switch. When you issue this command, a prompt appears to confirm that the reset should proceed. When you enter y , you automatically [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-27 v1.0, November 2010 clear igmpsnooping This command clears the tables managed by the IGMP Snooping function and attempts to delete these entries from the Multicast Forwarding Database. clear pass This command resets all user passwords to the factory def[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-28 v1.0, November 2010 enable password This command prompts you to change the Privileged EXEC password. Passwords are a maximum of 64 alphanumeric characters. The password is case sensitive. The option [encrypted] allows the administrator to transfer the e[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-29 v1.0, November 2010 Using the options described below, you can specify the number and size of Echo Requests and the interval between Echo Requests. The following are examples of the CLI command. ping success: (Switch) #ping 10.254.2.160 count 3 interval[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-30 v1.0, November 2010 1 packets transmitted,0 packets received, 100% packet loss round-trip (msec) min/avg/max = 0/0/0 quit This command closes the current telnet connection or resets the current serial connection. The system asks you whether to save conf[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-31 v1.0, November 2010 copy The copy command uploads and downloads files to and from the switch. You can also use the copy command to manage the dual images ( image1 and image2 ) on the file system. Upload and download files from a server by using TFTP or [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-32 v1.0, November 2010 nvram:errorlog <url> Copies the error log file to a server. nvram:Switch CLI.cfg <url> Uploads the binary config file to a server. nvram:log <url> Copies the log file to a server. nvram:script <scriptname> <[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-33 v1.0, November 2010 write memory Use this command to save running configuration changes to NVRAM so that the changes you make will persist across a reboot. This command is the same as copy system:running config nvram:startup-config . Simple Network Time[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-34 v1.0, November 2010 no sntp broadcast client poll-interval This command resets the poll interval for SNTP broadcast client back to the default value. sntp client mode This command enables Simple Network Time Protocol (SNTP) client mode and may set the m[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-35 v1.0, November 2010 sntp unicast client poll-interval This command sets the poll interval for SNTP unicast clients in seconds as a power of two where <poll-interval> can be a value from 6 to 10. no sntp unicast client poll-interval This command re[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-36 v1.0, November 2010 no sntp unicast client poll-retry This command will reset the poll retry for SNTP unicast clients to its default value. sntp server This command configures an SNTP server (a maximum of three). The optional priority can be a value of [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-37 v1.0, November 2010 Zone name: A name to associate with the time zone Hours-offset: Number of hours difference with UTC Minutes-offset: Number of minutes difference with UTC no clock timezone This command sets the switch to UTC time. show sntp This comm[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-38 v1.0, November 2010 show sntp client This command is used to display SNTP client settings. show sntp server This command is used to display SNTP server settings and configured servers. Format show sntp client Mode Privileged EXEC Term Definition Client [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-39 v1.0, November 2010 For each configured server: show clock This command is used to display the time information. Term Definition Host Address IP address or hostname of configured SNTP Server. Address Type Address Type of configured SNTP server. Priority[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-40 v1.0, November 2010 DHCP Server Commands This section describes the commands you to configure the DHCP server settings for the switch. DHCP uses UDP as its transport protocol and supports a number of features that facilitate in administration address al[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-41 v1.0, November 2010 no client-identifier This command deletes the client identifier. client-name This command specifies the name for a DHCP client. Name is a string consisting of standard ASCII characters. no client-name This command removes the client [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-42 v1.0, November 2010 no default-router This command removes the default router list. dns-server This command specifies the IP servers available to a DHCP client. Address parameters are valid IP addresses; each made up of four decimal bytes ranging from 0[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-43 v1.0, November 2010 no hardware-address This command removes the hardware address of the DHCP client. host This command specifies the IP address and network mask for a manual binding to a DHCP client. Address and Mask are valid IP addresses; each made u[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-44 v1.0, November 2010 no lease This command restores the default value of the lease time for DHCP Server. network (DHCP Pool Config) Use this command to configure the subnet number and mask for a DHCP address pool on the server. Network-number is a valid [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-45 v1.0, November 2010 no bootfile This command deletes the boot image name. domain-name This command specifies the domain name for a DHCP client. The <domain> specifies the domain name string of the client. no domain-name This command removes the do[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-46 v1.0, November 2010 no netbios-name-server This command removes the NetBIOS name server list. netbios-node-type The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration Protocol (DHCP) clients.type Specifies the NetBIOS node[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-47 v1.0, November 2010 no next-server This command removes the boot server list. option The option command configures DHCP Server options. The < code > parameter specifies the DHCP option code and ranges from 1-254. The <ascii string> parameter[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-48 v1.0, November 2010 no ip dhcp excluded-address This command removes the excluded IP addresses for a DHCP client. Low-address and high- address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is inval[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-49 v1.0, November 2010 service dhcp This command enables the DHCP server. no service dhcp This command disables the DHCP server. ip dhcp bootp automatic This command enables the allocation of the addresses to the bootp client. The addresses are from the au[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-50 v1.0, November 2010 ip dhcp conflict logging This command enables conflict logging on DHCP server. no ip dhcp conflict logging This command disables conflict logging on DHCP server. clear ip dhcp binding This command deletes an automatic address binding[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-51 v1.0, November 2010 clear ip dhcp conflict The command is used to clear an address conflict from the DHCP Server database. The server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used as the address p[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-52 v1.0, November 2010 show ip dhcp pool configuration This command displays pool configuration. If all is specified, configuration for all the pools is displayed. The following additional field is displayed for Dynamic pool type: The following additional [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-53 v1.0, November 2010 show ip dhcp server statistics This command displays DHCP server statistics. Message Received: Message Sent: Format show ip dhcp server statistics Modes • Privileged EXEC • User EXEC Field Definition Automatic Bindings The number[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-54 v1.0, November 2010 show ip dhcp conflict This command displays address conflicts logged by the DHCP Server. If no IP address is specified, all the conflicting addresses are displayed. DNS Client Commands These commands are used in the Domain Name Syste[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-55 v1.0, November 2010 ip domain name Use this command to define a default domain name that the software uses to complete unqualified host names (names with a domain name). By default, no default domain name is configured in the system. < name > may [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-56 v1.0, November 2010 no ip domain list Use this command to delete a name from a list. ip name server Use this command to configure the available name servers. Up to eight servers can be defined in one command or by using multiple commands. The parameter [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-57 v1.0, November 2010 no ip host Use this command to remove the name-to-address mapping. ipv6 host Use this command to define static host name-to-IPv6 address mapping in the host cache. < name > is host name. <v6 address > is the IPv6 address [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-58 v1.0, November 2010 no ip domain retry Use this command to return to the default. ip domain timeout Use this command to specify the amount of time to wait for a response to a DNS query. The parameter < seconds > specifies the time, in seconds, to [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-59 v1.0, November 2010 show hosts Use this command to display the default domain name, a list of name server hosts, the static and the cached list of host names and addresses < name > ranges from 1-255 characters. This command displays both IPv4 and [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-60 v1.0, November 2010 www.stanford.edu 72 3 IP 171.64.14.203 Packet Capture Commands Packet capture commands assist in troubleshooting protocol-related problems with the management CPU. The packets to and from the management CPU can be captured in an inte[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-61 v1.0, November 2010 no capture receive packet This command disables the capturing of receive packets. capture all packets This command enables the capturing of receive packets. no capture all packets This command disables the capturing of all packets. c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-62 v1.0, November 2010 Serviceability Packet Tracing Commands These commands improve the capability of network engineers to diagnose conditions affecting their managed switch product. debug arp Use this command to enable ARP debug protocol messages. no deb[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-63 v1.0, November 2010 no debug auto-voip Use this command to disable Auto VOIP debug messages. debug clear This command disables all previously enabled “debug” traces. debug console This command enables the display of “debug” trace output on the l[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-64 v1.0, November 2010 debug dot1x packet Use this command to enable dot1x packet debug trace. no debug dot1x packet Use this command to disable dot1x packet debug trace. debug igmpsnooping packet This command enables tracing of IGMP Snooping packets recei[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-65 v1.0, November 2010 debug igmpsnooping packet transmit This command enables tracing of IGMP Snooping packets transmitted by the switch. Snooping should be enabled on the device and the interface in order to monitor packets for a particular interface. A [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-66 v1.0, November 2010 no debug igmpsnooping transmit This command disables tracing of transmitted IGMP snooping packets. debug igmpsnooping packet receive This command enables tracing of IGMP Snooping packets received by the switch. Snooping should be ena[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-67 v1.0, November 2010 no debug igmpsnooping receive This command disables tracing of received IGMP Snooping packets. debug ip acl Use this command to enable debug of IP Protocol packets matching the ACL criteria. no debug ip acl Use this command to disabl[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-68 v1.0, November 2010 no debug ip dvmrp packet Use this command to disable debug tracing of DVMRP packet reception and transmission. debug ip igmp packet Use this command to trace IGMP packet reception and transmission. receive traces only received IGMP p[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-69 v1.0, November 2010 no debug ip mcache packet Use this command to disable debug tracing of MDATA packet reception and transmission. debug ip pimdm packet Use this command to trace PIMDM packet reception and transmission. receive traces only received PIM[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-70 v1.0, November 2010 debug ip pimsm packet Use this command to trace PIMSM packet reception and transmission. receive traces only received PIMSM packets and transmit traces only transmitted PIMSM packets. When neither keyword is used in the command, then[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-71 v1.0, November 2010 debug ipv6 mcache packet Use this command for tracing MDATAv6 packet reception and transmission. receive traces only received data packets and transmit traces only transmitted data packets. When neither keyword is used in the command[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-72 v1.0, November 2010 debug ipv6 pimdm packet Use this command to trace PIMDMv6 packet reception and transmission. receive traces only received PIMDMv6 packets and transmit traces only transmitted PIMDMv6 packets. When neither keyword is used in the comma[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-73 v1.0, November 2010 debug lacp packet This command enables tracing of LACP packets received and transmitted by the switch. A sample output of the trace message is shown below. <15> JAN 01 14:04:51 10.254.24.31-1 DOT3AD[183697744]: dot3ad_debug.c(3[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-74 v1.0, November 2010 no debug mldsnooping packet Use this command to disable debug tracing of MLD snooping packet reception and transmission. debug ospf packet This command enables tracing of OSPF packets received and transmitted by the switch. Sample ou[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-75 v1.0, November 2010 The remaining fields in the trace are specific to the type of OSPF Packet. HELLO packet field definitions: DB_DSCR packet field definitions: LS_REQ packet field definitions. Intf The interface that the packet came in or went out on. [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-76 v1.0, November 2010 LS_UPD packet field definitions. LS_ACK packet field definitions. no debug ospf packet This command disables tracing of OSPF packets. debug ospfv3 packet Use this command to enable OSPFv3 packet debug trace. no debug ospfv3 packet Us[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-77 v1.0, November 2010 debug ping packet This command enables tracing of ICMP echo requests and responses. The command traces pings on the network port/ serviceport for switching packages. For routing packages, pings are traced on the routing ports as well[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-78 v1.0, November 2010 debug rip packet This command turns on tracing of RIP requests and responses. This command takes no options. The output is directed to the log file. A sample output of the trace message is shown below. <15> JAN 01 00:35:15 192.[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-79 v1.0, November 2010 no debug rip packet This command disables tracing of RIP requests and responses. debug sflow packet Use this command to enable sFlow debug packet trace. no debug sflow packet Use this command to disable sFlow debug packet trace. debu[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-80 v1.0, November 2010 no debug spanning-tree bpdu This command disables tracing of spanning tree BPDUs. debug spanning-tree bpdu receive This command enables tracing of spanning tree BPDUs received by the switch. Spanning tree should be enabled on the dev[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-81 v1.0, November 2010 no debug spanning-tree bpdu receive This command disables tracing of received spanning tree BPDUs. debug spanning-tree bpdu transmit This command enables tracing of spanning tree BPDUs transmitted by the switch. Spanning tree should [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-82 v1.0, November 2010 no debug spanning-tree bpdu transmit This command disables tracing of transmitted spanning tree BPDUs. Cable Test Command The cable test feature enables you to determine the cable connection status on a selected port. cablestatus Thi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-83 v1.0, November 2010 sFlow Commands sFlow ® is the standard for monitoring high-speed switched and routed networks. sFlow technology is built into network equipment and gives complete visibility into network activity, enabling effective management and c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-84 v1.0, November 2010 no sflow receiver Use this command to set the sFlow collector parameters back to the defaults. sflow sampler A data source configured to collect flow samples is called a poller. Use this command to configure a new sFlow sampler insta[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-85 v1.0, November 2010 no sflow sampler Use this command to reset the sFlow sampler instance to the default settings. sflow poller A data source configured to collect counter samples is called a poller. Use this command to enable a new sFlow poller instanc[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-86 v1.0, November 2010 show sflow agent The sFlow agent collects time-based sampling of network interface statistics and flow-based samples. These are sent to the configured sFlow receivers. Use this command to display the sFlow agent information. Example:[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-87 v1.0, November 2010 show sflow receivers Use this command to display configuration information related to the sFlow receivers. Example: The following shows example CLI display output for the command. (switch) #show sflow receivers 1 Receiver Index......[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-88 v1.0, November 2010 Datagram Version............................... 5 Maximum Datagram Size.......................... 1400 show sflow samplers Use this command to display the sFlow sampling instances created on the switch. Software License Commands Rele[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-89 v1.0, November 2010 show license This command displays the license status. License Date indicates the date of the license. License Status indicates whether license is active or inactive. Example: The following shows example CLI display output for the co[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-90 v1.0, November 2010 IP Address Conflict Commands ip address-conflict-detect run This command triggers the switch to run active address conflict detection by sending gratuitous ARP packets for IPv4 addresses on the switch. show ip address-conflict This c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-91 v1.0, November 2010 Link Local Protocol Filtering Commands Link Local Protocol Filtering (LLPF) allows the switch to filter out multiple proprietary protocol PDUs, such as Port Aggregation Protocol (PAgP), if the problems occur with proprietary protocol[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Utility Commands 6-92 v1.0, November 2010 Term Definition Block ISDP Shows whether the port blocks ISDP PDUs. Block VTP Shows whether the port blocks VTP PDUs. Block DTP Shows whether the port blocks DTP PDUs. Block UDLD Shows whether the port blocks UDLD PDUs. Block PAGP Sh[...]

7-1 v1.0, November 2010 Chapter 7 Management Commands This chapter describes the management commands available in the managed switch CLI. The Management Commands chapter contains the following sections: • “Configuring the Switch Management CPU” on page 7-2 . • “Network Interface Commands” on page 7-4 . • “Console Port Access Command[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-2 v1.0, November 2010 Configuring the Switch Management CPU To manage the switch via the web GUI or telnet, an IP address needs to be assigned to the switch management CPU. Whereas there are CLI commands that can be used to do this, ezconfig simplifies [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-3 v1.0, November 2010 The following is an example of an ezconfig session. NETGEAR EZ Configuration Utility -------------------------------- Hello and Welcome! This utility will walk you thru assigning the IP address for the switch management CPU. It wil[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-4 v1.0, November 2010 Network Interface Commands This section describes the commands you use to configure a logical interface for management access. To configure the management VLAN, see “network mgmt_vlan” on page 3-32 . enable (Privileged EXEC acc[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-5 v1.0, November 2010 network protocol This command specifies the network configuration protocol to be used. If you modify this value, change is effective immediately. If you use the bootp parameter, the switch periodically sends requests to a BootP ser[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-6 v1.0, November 2010 no network mac-type This command resets the value of MAC address to its default. network javamode This command specifies whether or not the switch should allow access to the Java applet in the header frame of the Web interface. Whe[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-7 v1.0, November 2010 The following shows example CLI display output for the network port. (Netgear Switch) #show network Interface Status............................... Always Up IP Address..................................... 10.250.3.1 Subnet Mask...[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-8 v1.0, November 2010 Management VLAN ID............................. 1 Web Mode....................................... Enable Java Mode...................................... Enable Console Port Access Commands This section describes the commands you us[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-9 v1.0, November 2010 no serial baudrate This command sets the communication rate of the terminal interface. serial timeout This command specifies the maximum connect time (in minutes) without console activity. A value of 0 indicates that a console can [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-10 v1.0, November 2010 enable authentication To specify authentication method list when the user accesses a higher privilege level in remote telnet or console, use the enable authentication command in line configuration mode. no enable authentication To[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-11 v1.0, November 2010 Telnet Commands This section describes the commands you use to configure and view Telnet settings. You can use Telnet to manage the device from a remote management host. ip telnet server enable Use this command to enable Telnet co[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-12 v1.0, November 2010 transport input telnet This command regulates new Telnet sessions. If enabled, new Telnet sessions can be established until there are no more sessions available. An established session remains active until the session is ended or [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-13 v1.0, November 2010 no transport output telnet Use this command to prevent new outbound Telnet connection from being established. session-limit This command specifies the maximum number of simultaneous outbound Telnet sessions. A value of 0 indicates[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-14 v1.0, November 2010 no session-timeout This command sets the Telnet session timeout value to the default. The timeout value unit of time is minutes. telnetcon maxsessions This command specifies the maximum number of Telnet connection sessions that ca[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-15 v1.0, November 2010 no telnetcon timeout This command sets the Telnet connection session timeout value to the default. show telnet This command displays the current outbound Telnet settings. In other words, these settings apply to Telnet connections [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-16 v1.0, November 2010 show telnetcon This command displays the current inbound Telnet settings. In other words, these settings apply to Telnet connections initiated from a remote system to the switch. Secure Shell (SSH) Commands This section describes [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-17 v1.0, November 2010 ip ssh protocol This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set. ip ssh server enable This command enables the IP secure shell se[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-18 v1.0, November 2010 no sshcon maxsessions This command sets the maximum number of allowed SSH connection sessions to the default value. sshcon timeout This command sets the SSH connection session timeout value, in minutes. A session is active as long[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-19 v1.0, November 2010 Management Security Commands This section describes commands you use to generate keys and certificates, which you can do in addition to loading them as before. crypto certificate generate Use this command to generate self-signed c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-20 v1.0, November 2010 crypto key generate rsa Use this command to generate an RSA key pair for SSH. The new key files will overwrite any existing generated or downloaded RSA key files. no crypto key generate rsa Use this command to delete the RSA key f[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-21 v1.0, November 2010 ip http server This command enables access to the switch through the Web interface. When access is enabled, the user can login to the switch from the Web interface. When access is disabled, the user cannot login to the switch&apos[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-22 v1.0, November 2010 ip http java This command enables the Web Java mode. The Java mode applies to both secure and un-secure Web connections. no ip http java This command disables the Web Java mode. The Java mode applies to both secure and un-secure W[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-23 v1.0, November 2010 ip http authentication This command specifies the authentication methods for http server users. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the au[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-24 v1.0, November 2010 no ip http session maxsessions This command restores the number of allowable un-secure HTTP sessions to the default value. ip http session soft-timeout This command configures the soft timeout for un-secure HTTP sessions in minute[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-25 v1.0, November 2010 no ip http secure-session maxsessions This command restores the number of allowable secure HTTP sessions to the default value. ip http secure-session soft-timeout This command configures the soft timeout for secure HTTP sessions i[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-26 v1.0, November 2010 no ip http secure-session hard-timeout This command resets the hard timeout for secure HTTP sessions to the default value. ip https authentication This command specifies the authentication methods for http server users. The additi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-27 v1.0, November 2010 no ip http secure-port This command is used to reset the SSL port to the default value. ip http secure-protocol This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or to both TLS1 an[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-28 v1.0, November 2010 Access Commands Use the commands in this section to close remote connections or to view information about connections to the system. disconnect Use the disconnect command to close HTTP, HTTPS, Telnet or SSH sessions. Use all to cl[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-29 v1.0, November 2010 User Account Commands This section describes the commands you use to add, manage, and delete system users. The 7000 series software has two default users: admin and guest. The admin user can view and configure system settings, and[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-30 v1.0, November 2010 no username This command removes a user account. username nopassword This command removes the password from a user. username <username> unlock Use this command to unlock a locked user account. Only a user with read/write acc[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-31 v1.0, November 2010 username snmpv3 accessmode This command specifies the snmpv3 access privileges for the specified login user. The valid accessmode values are readonly or readwrite . The <username> is the login user name for which the specifi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-32 v1.0, November 2010 no username snmpv3 authentication This command sets the authentication protocol to be used for the specified user to none . The <username> is the user name for which the specified authentication protocol is used. username sn[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-33 v1.0, November 2010 show users This command displays the configured user names and their settings. This command is only available for users with Read/Write privileges. The SNMPv3 fields will only be displayed if SNMP is available on the system. show [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-34 v1.0, November 2010 show users long This command is used to display the users full name. show users login-history This command is used to display the users who have logged in previously. passwords min-length Use this command to enforce a minimum pass[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-35 v1.0, November 2010 no passwords min-length Use this command to set the minimum password length to the default value. passwords history Use this command to set the number of previous passwords that shall be stored for each user account. When a local [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-36 v1.0, November 2010 no passwords aging Use this command to set the password aging to the default value. passwords lock-out Use this command to strengthen the security of the switch by locking user accounts that have failed login due to wrong password[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-37 v1.0, November 2010 no passwords strength-check Use this command to disable the password strength-check. passwords strength minimum uppercase-letters Use this command to enforce a minimum number of uppercase letters that a password should contain. Th[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-38 v1.0, November 2010 no passwords strength minimum lowercase-letters Use this command to reset the minimum number of lowercase letters to the default value. passwords strength minimum numeric-characters Use this command to enforce a minimum number of [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-39 v1.0, November 2010 no passwords strength minimum special-letters Use this command to reset the minimum number of special letters to the default value. passwords strength maximum consecutive-characters Use this command to enforce a maximum number of [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-40 v1.0, November 2010 no passwords strength maximum repeated-characters Use this command to reset the maximum number of repeated-characters to the default value. passwords strength minimum character-classes Use this command to enforce a minimum number [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-41 v1.0, November 2010 no passwords strength exclude-keyword Use this command to remove the exclude-keyword. show passwords configuration Use this command to display the configured password management settings. Format no passwords strength exclude-keywo[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-42 v1.0, November 2010 show passwords result Use this command to display the last password set result information. aaa authentication login This command is used to set authentication at login. The default and optional list names that you create with the[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-43 v1.0, November 2010 where: Default Uses the listed authentication methods that follow this argument as the default list of methods when a user logs in. list-name Character string used to name the list of authentication methods activated when a user l[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-44 v1.0, November 2010 aaa authentication enable This command is used to set authentication when the user access higher privilege level, use the aaa authentication enable default command in global configuration mode. The default and optional list names [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-45 v1.0, November 2010 no aaa authentication enable Use this command to remove the authentication method. aaa authentication dot1x This command is used to set authentication for dot1x users. The method argument identifies the list of methods that the au[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-46 v1.0, November 2010 no aaa authentication dot1x Use this command to remove the authentication at login. aaa ias-user username The Internal Authentication Server (IAS) database is a dedicated internal database used for local authentication of users fo[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-47 v1.0, November 2010 no password(AAA IAS User Configuration) Use this command to remove a password for a user in the IAS database. clear aaa ias-users Use this command to remove all users from the IAS database. show aaa ias-users Use this command to d[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-48 v1.0, November 2010 snmp-server community This command adds (and names) a new SNMP community. A community <name> is a name associated with the switch and with a set of SNMP managers that manage it with a specified privileged level. The length o[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-49 v1.0, November 2010 no snmp-server community ipaddr This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the applicable community name. snmp-server community ipmask This command sets a client IP mask for an SNMP communi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-50 v1.0, November 2010 snmp-server community mode This command activates an SNMP community. If a community is enabled, an SNMP manager associated with this community manages the switch according to its access right. If the community is disabled, no SNMP[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-51 v1.0, November 2010 snmp-server enable traps violation This command enables the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port. no snmp-server enable traps violation This command di[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-52 v1.0, November 2010 snmp-server enable traps linkmode This command enables Link Up/Down traps for the entire switch. When enabled, link traps are sent only if the Link Trap flag setting associated with the port is enabled. See “snmp trap link- stat[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-53 v1.0, November 2010 snmp-server enable traps stpmode This command enables the sending of new root traps and topology change notification traps. no snmp-server enable traps stpmode This command disables the sending of new root traps and topology chang[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-54 v1.0, November 2010 no snmptrap This command deletes trap receivers for a community. snmptrap snmpversion This command modifies the SNMP version of a trap. The maximum length of <name> is 16 case- sensitive alphanumeric characters. The <snmp[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-55 v1.0, November 2010 snmptrap mode This command activates or deactivates an SNMP trap. Enabled trap receivers are active (able to receive traps). Disabled trap receivers are inactive (not able to receive traps). no snmptrap mode This command deactivat[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-56 v1.0, November 2010 snmp trap link-status all This command enables link status traps for all interfaces. no snmp trap link-status all This command disables link status traps for all interfaces. show snmpcommunity This command displays SNMP community [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-57 v1.0, November 2010 show snmptrap This command displays SNMP trap receivers. Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Six trap receiv[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-58 v1.0, November 2010 show trapflags This command displays trap conditions. The command’s display shows all the enabled OSPFv2 and OSPFv3 trapflags. Configure which traps the switch should generate by enabling or disabling the trap condition. If a tr[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-59 v1.0, November 2010 RADIUS Commands This section describes the commands you use to configure the switch to use a Remote Authentication Dial-In User Service (RADIUS) server on your network for authentication and accounting. authorization network radiu[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-60 v1.0, November 2010 radius server attribute This command specifies the RADIUS client to use the NAS-IP Address attribute in the RADIUS requests. If the specific IP address is configured while enabling this attribute, the RADIUS client uses that IP ad[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-61 v1.0, November 2010 the authenticating and accounting servers are configured without a name, the command uses the ‘Default_RADIUS_Auth_Server’ and ‘Default_RADIUS_Acct_Server’ as the default names, respectively. The same name can be configure[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-62 v1.0, November 2010 no radius server host The no version of this command deletes the configured server entry from the list of configured RADIUS servers. If the RADIUS authenticating server being removed is the active server in the servers that are id[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-63 v1.0, November 2010 Text-based configuration supports Radius server’s secrets in encrypted and non-encrypted format. When you save the configuration, these secret keys are stored in encrypted format only. If you want to enter the key in encrypted f[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-64 v1.0, November 2010 no radius server msgauth The no version of this command disables the message authenticator attribute to be used for the specified RADIUS Authenticating server. radius server primary This command specifies a configured server that [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-65 v1.0, November 2010 no radius server retransmit The no version of this command sets the value of this global parameter to the default value. radius server timeout This command configures the global parameter for the RADIUS client that specifies the t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-66 v1.0, November 2010 show radius This command displays the values configured for the global parameters of the RADIUS client. The following shows example CLI display output for the command. (Switch)#show radius Number of Configured Authentication Serve[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-67 v1.0, November 2010 show radius servers This command displays the summary and details of RADIUS authenticating servers configured for the RADIUS client. The following shows example CLI display output for the command. (Switch) #show radius servers Cur[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-68 v1.0, November 2010 rent ---- ------------------------ --------------------------------- ----- ---------- * 192.168.37.200 Network1_RADIUS_Server 1813 Primary 192.168.37.201 Network2_RADIUS_Server 1813 Secondary 192.168.37.202 Network3_RADIUS_Server [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-69 v1.0, November 2010 If you do not specify any parameters, then only the accounting mode and the RADIUS accounting server details are displayed. The following shows example CLI display output for the command. (Switch) #show radius accounting name Host[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-70 v1.0, November 2010 show radius accounting statistics This command displays a summary of statistics for the configured RADIUS accounting servers. Format show radius accounting statistics {< ipaddr|dnsname > | name < servername >} Mode Pri[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-71 v1.0, November 2010 The following shows example CLI display output for the command. (Switch) #show radius accounting statistics 192.168.37.200 RADIUS Accounting Server Name................. Default_RADIUS_Server Host Address..........................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-72 v1.0, November 2010 The following shows example CLI display output for the command. (Switch) #show radius statistics 192.168.37.200 RADIUS Server Name............................ Default_RADIUS_Server Server Host Address........................... 19[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-73 v1.0, November 2010 Timeouts...................................... 0 Unknown Types................................. 0 Packets Dropped............................... 0 (Switch) #show radius statistics name Default_RADIUS_Server RADIUS Server Name.....[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-74 v1.0, November 2010 no tacacs-server host Use the no tacacs-server host command to delete the specified hostname or IP address. The <ip-address|hostname> parameter is the IP address of the TACACS+ server. tacacs-server key Use the tacacs-server[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-75 v1.0, November 2010 tacacs-server timeout Use the tacacs-server timeout command to set the timeout value for communication with the TACACS+ servers. The <timeout> parameter has a range of 1-30 and is the timeout value in seconds. no tacacs-serv[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-76 v1.0, November 2010 port Use the port command in TACACS Configuration mode to specify a server port number. The server <port-number> range is 0 - 65535. priority Use the priority command in TACACS Configuration mode to specify the order in whic[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-77 v1.0, November 2010 Configuration Scripting Commands Configuration Scripting allows you to generate text-formatted script files representing the current configuration of a system. You can upload these configuration script files to a PC or UNIX system[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-78 v1.0, November 2010 show telnet !Displays the information about remote connections ! Display information about direct connections show serial ! End of the script file! script apply This command applies the commands in the script to the switch. The &l[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-79 v1.0, November 2010 script show This command displays the contents of a script file, which is named <scriptname> . script validate This command validates a script file by parsing each line in the script file where <scriptname> is the name[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-80 v1.0, November 2010 copy (pre-login banner) The copy command includes the option to upload or download the CLI Banner to or from the switch. You can specify local URLs by using TFTP, Xmodem, Ymodem, or Zmodem. set prompt This command changes the name[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-81 v1.0, November 2010 • If you try to configure IPv6 routing without first selecting the dual IPv4-IPv6 routing template, a warning message appears. sdm prefer This command specifies the SDM template to use on the switch. no sdm prefer This command r[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Management Commands 7-82 v1.0, November 2010 Example: (Switch) #show sdm prefer Current Template: Routing Active Template: dual-ipv4-ipv6 default The selected template optimizes the resources in the switch to support maximum IPv4 routes. No of IPv4 routes 6k No of IPV6 route[...]

8-1 v1.0, November 2010 Chapter 8 Log Messages This chapter lists common log messages, along with information regarding the cause of each message. There is no specific action that can be taken per message. When there is a problem being diagnosed, a set of these messages in the event log, along with an understanding of the system configuration and d[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-2 v1.0, November 2010 Table 8-1: BSP Log Messages Component Message Cause BSP Event(0xaaaaaaaa) Switch has restarted. BSP Starting code... BSP initialization complete, starting 7000 series application. Table 8-2: NIM Log Messages Component Message Cause NIM NI[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-3 v1.0, November 2010 Table 8-3: System Log Messages Component Message Cause SYSTEM Configuration file Switch CLI.cfg size is 0 (zero) bytes The configuration file could not be read. This message may occur on a system for which no configuration has ever been s[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-4 v1.0, November 2010 Utilities Table 8-4: Trap Mgr Log Message Component Message Cause Trap Mgr Link Up/Down: unit/slot/port An interface changed link state. Table 8-5: DHCP Filtering Log Messages Component Message Cause DHCP Filtering Unable to create r/w lo[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-5 v1.0, November 2010 Table 8-7: RADIUS Log Messages Component Message Cause RADIUS RADIUS: Invalid data length - xxx The RADIUS Client received an invalid message from the server. RADIUS RADIUS: Failed to send the request A problem communicating with the RADI[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-6 v1.0, November 2010 Management Table 8-8: TACACS+ Log Messages Component Message Cause TACACS+ TACACS+: authentication error, no server to contact TACACS+ request needed, but no servers are configured. TACACS+ TACACS+: connection failed to server x.x.x.x TAC[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-7 v1.0, November 2010 Table 8-12: EmWeb Log Messages Component Message Cause EmWeb EMWEB (Telnet): Max number of Telnet login sessions exceeded A user attempted to connect via telnet when the maximum number of telnet sessions were already active. EmWeb EMWEB ([...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-8 v1.0, November 2010 Table 8-14: WEB Log Messages Component Message Cause WEB Max clients exceeded This message is shown when the maximum allowed java client connections to the switch is exceeded. WEB Error on send to sockfd XXXX, closing connection Failed to[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-9 v1.0, November 2010 SSHD SSHD: Unknown UI event in message, event=XXXX Failed to dispatch the UI event to the appropriate SSHD function as it’s an invalid event. XXXX indicates the event to be dispatched. SSHD sshdApiCnfgrCommand: Failed calling sshdIssueC[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-10 v1.0, November 2010 Switching Table 8-18: User_Manager Log Messages Component Message Cause User_Manager User Login Failed for XXXX Failed to authenticate user login. XXXX indicates the username to be authenticated. User_Manager Access level for user XXXX c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-11 v1.0, November 2010 Table 8-20: IP Subnet VLANS Log Messages Component Message Cause IPsubnet vlans ERROR vlanIpSubnetSubnetValid :Invalid subnet This occurs when an invalid pair of subnet and netmask has come from the CLI IPsubnet vlans IP Subnet Vlans: fa[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-12 v1.0, November 2010 Mac based VLANS vlanMacVlanChangeCallback: Failed to delete an entry This appears when a dtl fails to delete an entry for an vlan delete notify event. Table 8-22: 802.1x Log Messages Component Message Cause 802.1X function : Failed calli[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-13 v1.0, November 2010 IGMP Snooping Failed to set igmp mrouter mode %d for interface xxx on Vlan yyy Failed to set VLAN multicast router mode due to IGMP Snooping message queue being full IGMP Snooping snoopCnfgrInitPhase1Process: Error allocating small buffe[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-14 v1.0, November 2010 802.3ad dot3adNimEventCompletionCallback, dot3adNimEventCreateCompletionCallback: DOT3AD: notification failed for event(%d), intf(%d), reason(%d) The event sent to NIM was not completed successfully Table 8-26: FDB Log Message Component [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-15 v1.0, November 2010 Table 8-30: 802.1Q Log Messages Component Message Cause 802.1Q dot1qIssueCmd: Unable to send message %d to dot1qMsgQueue for vlan %d - %d msgs in queue dot1qMsgQueue is full. 802.1Q dot1qVlanCreateProcess: Attempt to create a vlan with a[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-16 v1.0, November 2010 QoS Table 8-33: Protocol-based VLANs Log Messages Component Message Cause Protocol Based VLANs pbVlanCnfgrInitPhase2Process: Unable to register NIM callback Appears when nimRegisterIntfChange fails to register pbVlan for link state chang[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-17 v1.0, November 2010 Routing/IPv6 Routing Table 8-35: CoS Log Message Component Message Cause COS cosCnfgrInitPhase3Process: Unable to apply saved config -- using factory defaults The COS component was unable to apply the saved configuration and has initiali[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-18 v1.0, November 2010 Table 8-38: OSPFv2 Log Messages Component Message Cause OSPFv2 Best route client deregistration failed for OSPF Redist OSPFv2 registers with the IPv4 routing table manager (“RTO”) to be notified of best route changes. There are cases[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-19 v1.0, November 2010 OSPFv3 Warning: OSPF LSDB is 90% full (15292 LSAs). OSPFv3 limits the number of Link State Advertisements (LSAs) that can be stored in the link state database (LSDB). When the database becomes 90 or 95 percent full, OSPFv3 logs this warn[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-20 v1.0, November 2010 Table 8-41: VRRP Log Messages Component Message Cause VRRP Changing priority to 255 for virtual router with VRID 1 on interface 1/0/1 When the router is configured with the address being used as the virtual router ID, the router’s prio[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-21 v1.0, November 2010 Multicast Table 8-45: Cache Log Messages Component Message Cause Cache Out of memory when creating entry. When we run out of memory while creating a new cache (MFC) entry Cache Out of memory when creating cache. When we run out of memory[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-22 v1.0, November 2010 Table 8-48: PIM-SM Log Messages Component Message Cause PIM-SM PIM-SM not initialized This message arises when trying to activate pimsm interfaces or receiving pimsm packets when pimsm component is not initialized. PIM-SM Unable to take [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-23 v1.0, November 2010 Stacking Technologies PIM-DM Error creating PIM-DM pipe This message is logged when the PIM-DM Pipe (that receives control messages) creation fails. Table 8-50: DVMRP Log Messages Component Message Cause DVMRP dvmrp_send_graft: failed ge[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-24 v1.0, November 2010 OS In hapiBroadSystemMacAddress call to 'bcm_l2_addr_add' - FAILED : x Failed to add an L2 address to the MAC table. This should only happen when a hash collision occurs or the table is full. OS Failed installing mirror action [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-25 v1.0, November 2010 OS USL: A Trunk being set doesn't exist in USL Possible synchronization issue between the application, hardware, and sync layer. OS USL: failed to sync trunk table on unit=x Could not synchronize unit x due to a transport failure or[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-26 v1.0, November 2010 O/S Support OS USL: failed to sync initiator table on unit=x Could not synchronize unit x due to a transport failure or API issue on remote unit. A synchronization retry will be issued OS USL: failed to sync terminator table on unit=x Co[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Log Messages 8-27 v1.0, November 2010 OSAPI osapiCleanupIf: NetIPGet During the call to remove the interface from the route table, the attempt to get an ipv4 interface address from the stack failed. OSAPI osapiCleanupIf: NetMaskGet During the call to remove the interface fro[...]

9-1 v1.0, November 2010 Chapter 9 Captive Portal Commands The Captive Portal feature is a software implementation that blocks clients from accessing the network until user verification has been established. Verification can be configured to allow access for both guest and authenticated users. Authenticated users must be validated against a database[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-2 v1.0, November 2010 no enable Use this command to globally disable captive portal. http port Use this command to configure an additional HTTP port for captive portal to monitor. The valid range is from 0 to 65535. no http port Use this command to [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-3 v1.0, November 2010 no https port Use this command to reset the HTTPs port to the default HTTPS port 443. authentication timeout Use this command to configure the authentication timeout. If the user does not enter valid credentials within this tim[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-4 v1.0, November 2010 Example (switch)#show captive-portal Administrative Mode....................... Disabled Operational Status........................ Disabled Disable Reason............................ Administrator Disabled CP IP Address.......[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-5 v1.0, November 2010 Example (switch)#show captive-portal status Additional HTTP Port........................... 0 Additional HTTP Secure Port.................... 0 Peer Switch Statistics Reporting Interval...... 120 Authentication Timeout.........[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-6 v1.0, November 2010 no configuration Use this command to delete a CP configuration. The default configuration cannot be deleted. enable (Instance) Use this command to enable a captive portal configuration. no enable Use this command to disable a c[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-7 v1.0, November 2010 no name Use this command to remove a configuration name. protocol Use this command to configure the protocol mode for a captive portal configuration. The default protocol is http. verification Use this command to configure the [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-8 v1.0, November 2010 group Use this command to configure a group ID for this captive portal configuration. If a group number is configured, the user entry (Local or RADIUS) must be configured with the same name and the group to authenticate to this[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-9 v1.0, November 2010 redirect-url Use this command to configure the redirect URL for a captive portal configuration. The url is the URL for redirection which can be up to 512 characters in length. max-bandwidth-down Use this command configures the [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-10 v1.0, November 2010 no max-bandwidth-up Use this command to reset the maximum rate to the default . max-input-octets Use this command to configure the maximum number of octets the user is allowed to transmit. After this limit has been reached the[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-11 v1.0, November 2010 max-output-octets Use this command to configure the maximum number of octets the user is allowed to receive. After this limit has been reached the user will be disconnected. The number of octets is in bytes. 0 indicates limit [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-12 v1.0, November 2010 session-timeout (Captive Portal) Use this command to configure the session timeout for a captive portal configuration. After this limit has been reached, the user will be disconnected. Timeout is time in seconds. 0 indicates t[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-13 v1.0, November 2010 locale This command is not intended to be a user command. The administrator must use the WEB UI to create and customize captive portal web content. This command is primarily used by the show running-config command and process [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-14 v1.0, November 2010 block Use this command to block all traffic for a captive portal configuration. The administrator can block access to a captive portal configuration. When an instance is blocked no client traffic is allowed through any interfa[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-15 v1.0, November 2010 Example (switch)#show captive-portal configuration 1 CP ID..................................... 1 CP Name................................... cp1 Operational Status........................ Disabled Disable Reason...............[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-16 v1.0, November 2010 If the interface is specified. The following term will be displayed. Example (Switch)#show captive-portal configuration 1 interface CP ID..................................... 1 CP Name................................... cp1 Op[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-17 v1.0, November 2010 show captive-portal configuration status Use this command to display information about all configured captive portal configurations or about a specific captive portal configuration. The < 1-10 > is captive portal ID. If [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-18 v1.0, November 2010 Example (switch)#show captive-portal configuration status CP ID CP Name Mode Protocol Verification ----- ---------- -------- -------- ------------ 1 cp1 Enable https Guest 2 cp2 Enable http Local 3 cp3 Disable https Guest (swi[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-19 v1.0, November 2010 show captive-portal trapflags Use this command to display which captive portal traps are enabled. Example (switch)#show captive-portal trapflags Client Authentication Failure Traps............ Disable Client Connection Traps..[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-20 v1.0, November 2010 If the macaddr is specified, the following terms are displayed. Example (switch)#show captive-portal client status Client MAC Address Client IP Address Protocol Verification Session Time ----------------- ---------------- ----[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-21 v1.0, November 2010 Example (switch)#show captive-portal client 0102.0304.0506 statistics Client MAC Address........................ 0002.bc00.1290 Bytes Received............................ 0 Bytes Transmitted......................... 0 Packets [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-22 v1.0, November 2010 Example (switch) #show captive-portal interface client status Client Client Intf Intf Description MAC Address IP Address ------ ----------------------------------- ----------------- - -------------- 1/0/1 Unit: 1 Slot: 0 Port:[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-23 v1.0, November 2010 If the CP ID is specified, the following terms are displayed. Example (switch)#show captive-portal configuration client status CP ID CP Name Client MAC Address Client IP Address Interface ----- ------- ------------------ -----[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-24 v1.0, November 2010 Example (switch)#show captive-portal interface configuration status CP ID CP Name Interface Interface Description Type ----- ------------ --------- ---------------------------- -------- 1 Default 1/0/1 Unit: 1 Slot: 0 Port: 1 [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-25 v1.0, November 2010 no user Use this command to delete a user from the local user database. If the user has an existing session, it is disconnected. user name Use this command to modify the user name for a local captive portal user. <1-128>[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-26 v1.0, November 2010 no user group Use this command to dis-associate a group and user. user session-timeout Use this command to set the session timeout value for a captive portal user. Use the “no” form of this command to reset the session tim[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-27 v1.0, November 2010 no user idle-timeout Use this command to reset the idle timeout to the default value. user max-bandwidth-down Use this command to configure the bandwidth at which the client can receive data from the network. <1-128> is [...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-28 v1.0, November 2010 no user max-bandwidth-up Use this command to reset the limit to the default. user max-input-octets Use this command to limit the number of octets the user is allowed to transmit. After this limit has been reached the user will[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-29 v1.0, November 2010 no user max-output-octets Use this command to reset the limit to the default. user max-total-octets Use this command to limit the number of bytes the user is allowed to transmit and receive. The maximum number of octets is the[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-30 v1.0, November 2010 If the user ID is specified, the following terms are displayed. Example (switch)#show captive-portal user Format show captive-portal user [ <1-128> ] Mode Privileged EXEC mode Term Definition User ID The user ID User Nam[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-31 v1.0, November 2010 Session Idle User ID User Name Timeout Timeout Group ID Group Name ------- -------------- -------- -------- -------- ----------- 1 user123 10 13 1 Default 2 user234 0 0 1 Default (switch)#show captive-portal user 1 User ID....[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Captive Portal Commands 9-32 v1.0, November 2010 no user group Use this command to delete a user group. The default user group (1) cannot be deleted. user group name Use this command to configure a group name. <1-10> is the user group ID. The name can be a string up to[...]

Command List 10-1 v1.0, November 2010 Chapter 10 Command List clear checkpoint statistics ............................................................................................................................... ...2-14 {deny | permit} (IP ACL) ...................................................................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-2 Command List v1.0, November 2010 boot system ................................................................................................................................................................6-5 bootfile ....................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-3 v1.0, November 2010 clear pass ..................................................................................................................................................................6-27 clear port-channel ........................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-4 Command List v1.0, November 2010 debug isdp packet ............................................................................................................................... .................3-203 debug lacp packet ..................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-5 v1.0, November 2010 dot1x initialize ........................................................................................................................................................3-67 dot1x max-req .................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-6 Command List v1.0, November 2010 ip arp inspection trust ............................................................................................................................... ..........3-136 ip arp inspection validate ..........................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-7 v1.0, November 2010 ip icmp echo-reply ............................................................................................................................... .................4-27 ip icmp error-interval .............................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-8 Command List v1.0, November 2010 lacp partner admin state longtimeout ............................................................................................................3-102 lacp partner admin state passive .....................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-9 v1.0, November 2010 macfilter addsrc ....................................................................................................................................................3-120 macfilter addsrc all .............................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-10 Command List v1.0, November 2010 network mgmt_vlan ............................................................................................................................... ...............3-32 network parms ........................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-11 v1.0, November 2010 port-channel name ...............................................................................................................................................3-111 port-channel static .................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-12 Command List v1.0, November 2010 service dhcp .............................................................................................................................................................6-49 service-policy ..............................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-13 v1.0, November 2010 show autoinstall .......................................................................................................................................................6-2 show auto-voip .................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-14 Command List v1.0, November 2010 show gvrp configuration ............................................................................................................................... ......3-62 show hardware ...........................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-15 v1.0, November 2010 show isdp entry ....................................................................................................................................................3-200 show isdp interface ..............................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-16 Command List v1.0, November 2010 show policy-map ...................................................................................................................................................5-29 show policy-map interface ..........................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-17 v1.0, November 2010 show spanning-tree mst port summary ..........................................................................................................3-29 show spanning-tree mst port summary active ..............................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-18 Command List v1.0, November 2010 snmp-server community ipmask ......................................................................................................................7-49 snmp-server community mode .........................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-19 v1.0, November 2010 spanning-tree port mode all ...............................................................................................................................3-22 spanning-tree tcnguard .....................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-20 Command List v1.0, November 2010 traceroute ..................................................................................................................................................................6-24 traceroute ipv6 ..........................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 Command List 10-21 v1.0, November 2010 vlan port tagging all ............................................................................................................................... ...............3-38 vlan priority ....................................................[...]

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0 10-22 Command List v1.0, November 2010[...]