Nissan Armada (2014) Bedienungsanleitung

® 2014 AR MAD A OWN E R’S MAN UAL For y our s af ety , read car efully and keep in this v ehicle. 2014 N I SSAN AR MAD A T A6 0-D Printing : September 2013 (19) Publication No.: Printed in U .S.A. T A6 0-D ‘14 OM14E T A60U0[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

For descriptions specified for four-wheel drive models, a mark is placed at the begin- ning of the applicable sections/items. As with other vehicles with features for off-road use, failure to operate four-wheel drive models correctly may result in loss of control or an accident. Be sure to read “Driving safety precautions” in the “Start- ing [...]

If you see this symbol, it means “Do not do this” or “Do not let this happen.” If you see a symbol similar to these in an illustra- tion, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to these indicate movement or action. Arrows in an illustration that are similar to these call attention t[...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer in[...]

[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check [...]

1. 3rd row bench seat belts (P . 1-24) 2. 2nd row seat belts (P . 1-24) 3. Roof-mounted curtain side-impact and rollover supplemental air bag (P . 1-57) 4. Front seat belts (P . 1-24) 5. Head Restraints (P .1-7 ) 6. Supplemental front-impact air bags (P .1-57) 7. Seats (P . 1-2) 8. Occupant classification sensor (pressure sensor) (P .1-64) 9. Seat [...]

1. Engine hood (P . 3-23) 2. Windshield wiper and washer switch (P . 2-28) 3. Windshield (P . 8-20) 4. P ower windows (P . 2-51) 5. Door locks, NISSAN Intelligent Key 姞 , keys (P . 3-5, 3-12, 3-2) 6. Mirrors (P . 3-32) 7. Tire pressure (P . 9-12) 8. Flat tire (P . 6-3) 9. Tire chains (P . 8-43) 10. Replacing bulbs (P . 8-33) 11. Headlight and tur[...]

1. Roof rack (P . 2-49) 2. V ehicle loading (P . 9-13) 3. Glass hatch (P . 3-28) 4. Rear window washer (P .2-29) 5. Glass hatch release (P .3-28) 6. Lift gate release (P . 3-27) 7. Rearview monitor (if so equipped) (P .4-33) 8. Replacing bulbs (P . 8-33) 9. Fuel-filler cap, fuel recommendation (P . 3-28, P . 9-3, 9-5) 10. Fuel-filler door (P . 3-28[...]

1. Rear ventilators (P . 4-39) 2. Storage (P . 2-40) 3. DVD entertainment system (if so equipped) (P . 4-76) 4. Moonroof (if so equipped) (P . 2-54) 5. Map lights (P . 2-58) 6. Sun visors (P . 3-31) 7. HomeLink 姞 (P . 2-58) 8. Glove box (P . 2-41) 9. Seats (P . 1-2) 10. Cup holders (P . 2-44) 11. Luggage storage (P . 2-47) See the page number ind[...]

1. V ents (P . 4-39) 2. Headlight/fog light/turn signal switch (P . 2-30) 3. Steering wheel switch for audio control/Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-94, P . 4-96, 4-111) 4. Instrument brightness control (P . 2-33) 5. Driver supplemental air bag/horn (P . 1-57, P . 2-34) 6. Meters, gauges and warning/indicator lights (P[...]

15. Hazard lights (P . 6-2) 16. Climate controls (P . 4-40) 17. P ower outlet/cigarette lighter (accessory) (P . 2-38) 18. Heated seat switch (if so equipped) (P . 2-34) 19. V ehicle Dynamic Control (VDC) off switch (P . 5-33) 20. Shift selector (P . 5-14) 21. Front passenger air bag status light (P . 1-66) 22. P ower outlet (P . 2-38) 23. 4WD shif[...]

1. Battery (P . 8-14) 2. Fuse/fusible link box (P . 8-23) 3. T ransmission dipstick (P . 8-11) 4. Engine oil filler cap (P . 8-9) 5. Brake fluid reservoir (P . 8-12) 6. Windshield-washer fluid reservoir (P . 8-13) 7. Air cleaner (P . 8-18) 8. Drive belt location (P .8-16) 9. Radiator cap (P . 8-7) 10. P ower steering fluid reservoir (P . 8-12) 11. [...]

W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-14 Automatic transmis- sion check warning light 2-14 Automatic transmis- sion park warning light ( model) 2-14 or Brake warning light 2-14 Charge warning light 2-15 W arning light Name Page Check suspension warning light (if so equipped) 2-15 Engine oil pressure low/engine[...]

Indicator light Name Page T urn signal/hazard indicator lights 2-20 V ehicle Dynamic Control (VDC) OFF indicator light 2-20 0-10 Illustrated table of contents[...]

1 Safety—Seats, seat belts and supplemental restraint system Seats . ...........................................1 - 2 Front power seat adjustment . . ...................1 - 3 2nd row captain’s chair adjustment (if so equipped) ................................1 - 4 2nd row bench seat adjustment (if so equipped) ................................1 [...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

FRONT POWER SEA T ADJUSTMENT Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery . See “ Automatic drive pos[...]

Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides lower back support to the driver. Move the lever up or down to adjust the seat lumbar area. 2ND ROW CAPT AIN’S CHAIR ADJUSTMENT (if so equipped) [...]

Tip up for easy entry to the 3rd row The 2nd row captain’s chairs can be tipped for- ward for easy entry or exit from the 3rd row bench seat. T o enter the 3rd row 䊊 1 , raise the armrest so it is parallel to the seatback and in the stowed position, then lift up on the seatback latch located on the upper corner of the seatback on the 2nd row ca[...]

WARNING ● After adjustment, gently rock in the seat to make sure it is securely locked. ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the l[...]

ARMRESTS T o use the armrests, pull them down to the rest- ing position. 䊊 A Stowed position 䊊 B Resting position HEAD RESTRAINTS (1st row only) WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust the head restraints properly, as sp[...]

The illustration shows the seating positions equipped with head restraints. The first row head restraints are adjustable. 䉱 Indicates the seating position is equipped with a head restraint. 䡲 Indicates the seating position is equipped with an adjustable headrest. Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks LRS2071 [...]

Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears. T o raise the head restraint, pull it up. T o lower, push and hold the lock knob and push the head restraint down. WRS0134 LRS0888 LRS0889 Safety—Seats, seat belts and supplemental restraint system 1-9[...]

Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly so it is not loose in the vehicle. 5. Reinstall and properly adjust the head re- straint before an occ[...]

Adjust the Active Head Restraints properly as described in this section. HEAD RESTRAINTS (2nd row – outboard positions only) WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust the head restraints properly, as specified in this sectio[...]

Components 1. Head restraint 2. Lock knob 3. Stalks Removal Use the following procedure to remove the head restraints. 1. Adjust the seat or seatback as necessary. 2. Push and hold the lock knob(s) . 3. Pull the head restraint up until it is removed from the seat. 4. Store the head restraint properly so it is not loose in the vehicle. 5. Reinstall [...]

ADJUST ABLE HEADREST WARNING The adjustable headrests supplement the other vehicle safety systems. They may provide additional protection against in- jury in certain rear end collisions. Adjust the headrests properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the adjustable headre[...]

Components 1. Adjustable headrest 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the headrest so the center is level with the center of the seat occupant’s ears. T o raise the headrest, pull it up. LRS0887 WRS0134 LRS0888 1-14 Safety—Seats, seat belts and supplemental restraint system[...]

T o lower, push and hold the lock knob and push the headrest down. Removal Use the following procedure to remove the ad- justable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the headrest from the seat. 4. Store the headrest properly so it is not loose in the vehicle. 5. Reinstall and properl[...]

FLEXIBLE SEA TING WARNING ● Never allow anyone to ride in the cargo area or on the rear seats when they are in the fold-down position. In a collision, people riding in these areas without proper restraints are more likely to be seriously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats[...]

䊊 2 Once the seatback is released, it will enable you to fold the front passenger seatback flat over the seat cushion. 3. T o return the front passenger’s seat to a seating position, lift up on the seatback and push it up to an upright position. Move the recline switch backward until the desired angle is obtained. WARNING ● If you fold the fr[...]

䊊 3 Pull the strap to release the head restraint rearward. 䊊 4 Then lift up on the recline lever to fold the seatback flat forward. 䊊 5 There is a carpet panel flap that can be folded toward the back of the vehicle. LRS2063 LRS2096 LRS2097 1-18 Safety—Seats, seat belts and supplemental restraint system[...]

䊊 6 The carpet panel flaps provide a level cargo floor when the 3rd row seats are also folded flat. Reverse this process to return the 2nd row captain’s chairs to a seating position. Make sure to properly raise the seat- back to an upright position and push the seat cushion down into place. 7. Rotate the head restraint forward to return it to t[...]

䊊 2 Pull the strap to release the head restraint rearward. 䊊 3 Then lift up on the recline lever on the side of the outboard seats to fold the outboard seat- backs flat. T o fold the center seatback flat, pull up on the strap on the edge of the center seat cushion and fold the seatback toward the front of the vehicle. 䊊 4 There is a carpet pa[...]

䊊 5 The carpet panel flap provides a level cargo floor when the 3rd row seats are also folded flat. 6. T o return the outboard 2nd row bench seats to a seating position, reverse the process for the outboard seats. 7. T o return the center seat to a seating posi- tion, lift up on the pull strap on the back of the seat base while lifting on the sea[...]

T o return the 3rd row split bench seat to a seating position, unfold the seatback and push it back until it latches into position. WARNING ● When returning the seatbacks, be sure to attach the rear center seat belt connector. ● Do not unfasten the rear center seat belt connector except when folding down the rear seat. ● When attaching the re[...]

T o fold down the 3rd row seats, push and hold the bottom portion of the switch. T o raise the 3rd row seats, push and hold the top portion of the switch. A chime will sound three times to indicate the start of the operation. A warning beep will sound 5 times if the seat isn’t in the full upright or folded position when the ignition switch is pla[...]

PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up[...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NOT THE WAIST . A lap belt worn too h[...]

PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco[...]

Fastening the seat belts 1. Adjust the seat. See “Seats” earlier in this section. 䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move and [...]

䊊 3 P osition the lap belt portion low and snug on the hips as shown. 䊊 4 Pull the shoulder belt portion toward the retractor to take up extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest. The front passenger seat and the rear seating positions three-point seat belts have two modes of operation: ● Emerge[...]

Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle. The seat belt automatically re- tracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the seat belt is pulled quickly from the retractor. ● When the vehicle slows down rapidly .[...]

WARNING ● Always fasten the connector tongue and the seat belt in the order shown. ● Always make sure both the connector tongue and the seat belt tongue are secured when using the seat belt or installing a child restraint. Do not use the seat belt or child restraint with only the seat belt tongue attached. This could result in serious personal [...]

WARNING ● Do not unfasten the rear center seat belt connector except when folding down the rear seat. ● When attaching the rear center seat belt connector, be certain that the seat- backs are completely secured in the latched position and the rear center seat belt connector is completely secured. ● If the rear center seat belt connector and t[...]

WARNING ● Do not unfasten the rear center seat belt connector except when folding down the rear seat. ● When attaching the rear center seat belt connector, be certain that the seat- backs are completely secured in the latched position and the rear center seat belt connector is completely secured. ● If the rear center seat belt connector and t[...]

WARNING ● Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts. ● Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. ● Never use seat[...]

There are three basic types of child restraint systems: ● Rear-facing child restraint ● Forward-facing child restraint ● Booster seat The proper restraint depends on the child’s size. Generally , infants up to about 1 year and less than 20 lbs (9 kg) should be placed in rear-facing child restraints. Forward-facing child restraints are avail[...]

properly , the booster seat should raise the child so that the shoulder belt is properly positioned across the chest and the top, middle portion of the shoulder. The shoulder belt should not cross the neck or face and should not fall off the shoul- der. The lap belt should lie snugly across the lower hips or upper thighs, not the abdomen. A booster[...]

– Infants and children should never be held on anyone’s lap. Even the stron- gest adult cannot resist the forces of a collision. – Do not put a seat belt around both a child and another passenger. – NISSAN recommends that all child restraints be installed in the rear seat. Studies show that children are safer when properly restrained in the[...]

● If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child’s height and weight. Always follow all recommended procedures. All U.S. states and Canadian pro[...]

LA T CH lower anchor WARNING Failure to follow the warnings and instruc- tions for proper use and installation of child restraints could result in serious in- jury or death of a child or other passen- gers in a sudden stop or collision: – Attach LA TCH system compatible child restraints only at the locations shown in the illustration. – Do not [...]

LA T CH lower anchor location The LA TCH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA T CH lower anchors. Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-mounted attachments that [...]

T op tether anchor WARNING ● If the cargo cover (if so equipped) con- tacts the top tether strap when it is attached to the top tether anchor, re- move the cargo cover from the vehicle or secure it on the cargo floor below its attachment location. If the cargo cover is not removed, it may damage the top tether strap during a collision. A child co[...]

T op tether anchor point locations Anchor points are located in the following loca- tions: ● 2nd row bench (if so equipped) on the floor behind the outboard seating positions as shown. ● 2nd row captain’s chairs (if so equipped) on the floor behind the seats as shown. ● 3rd row bench seat on the floor of the cargo area behind the center sea[...]

3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 4. After attaching the[...]

5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 2 through 4. REAR-F ACING CHILD RESTRAINT INST ALLA TION USING THE SEA T BEL TS WARNING ● The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use t[...]

Refer to all Warnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in[...]

4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 6. After attaching the child restraint, test [...]

7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORW ARD-F ACING CHILD RESTRAINT INST ALLA TION USING LA T CH Refer to all Warnings a[...]

4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 5. Tighten the tether [...]

Refer to all Warnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be p[...]

4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in[...]

8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

INST ALLING T OP TETHER STRAP (2nd row captain’s chairs or 2nd row bench seat [if so equipped] ) First, secure the child restraint with the LA TCH lower anchors (2nd row captain’s or bench out- board seating positions only) or the seat belt, as applicable. 1. If necessary, raise or remove the head re- straint to position the top tether strap ?[...]

INST ALLING T OP TETHER STRAP (3rd row bench seat) WARNING In the 3rd row bench seat, a child restraint with a top tether strap can only be used in the center position. Do not place in an outboard seating position and attempt to angle the tether strap to the center position. The center position of the 3rd row bench seat is the seating position that[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. ● Check the booster seat in your vehicle to [...]

● Make sure the child’s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the center of the child’s ears. For example, if a low back booster seat 䊊 1 is chosen, the vehicle seatback must be at or above the center of the child’s ears. If the seatback is lower than the center of the child?[...]

3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head re- straint to obtain the correct booster seat fit. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the booster seat is removed. See “Head restraints” in this sec- [...]

PRECAUTIONS ON SUPPLEMENT AL RESTRAINT S Y STEM This Supplemental Restraint System (SRS) sec- tion contains important information concerning the following systems: ● Driver and passenger supplemental front- impact air bag (NISSAN Advanced Air Bag System) ● Front seat-mounted side-impact supple- mental air bag ● Roof-mounted curtain side-impac[...]

WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. ● The front passenger air bag will not inflate if the passenger air bag status light is lit[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. ARS1133 ARS1041 Safety—Seats, seat belts and supplemental restraint system 1-59[...]

WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain and rollover air bags inflate if they are not properly re- strained. Pre-teens and children should be properly restrained in the rear seat, if possible. ARS1042 ARS1043 ARS1044 1-60 Safety—Seats, seat belts and supplemental restraint system[...]

WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details. WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain s[...]

WARNING ● The seat belts, the side air bags and curtain and rollover air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain and rollover air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front sea[...]

WARNING ● When sitting in the 2nd row rear seat, do not hold onto the seatback of the front seat. If the side air bag inflates, you may be seriously injured. Be especially care- ful with children, who should always be properly restrained. Some examples of dangerous riding positions are shown in the illustrations. ● Do not use seat covers on the[...]

1. Roof-mounted curtain side-impact supplemental air bag inflators 2. Roof-mounted curtain side-impact and rollover supplemental air bags 3. Air bag Control Unit (ACU) 4. Supplemental front-impact air bag mod- ules 5. Crash zone sensor 6. Occupant classification system control unit 7. Occupant classification sensor (pres- sure sensor) 8. Seat belt [...]

The driver supplemental front-impact air bag is located in the center of the steering wheel. The passenger supplemental front-impact air bag is mounted in the dashboard above the glove box. The front air bags are designed to inflate in higher severity frontal collisions, although they may in- flate if the forces in another type of collision are sim[...]

Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection. Fail- ure to follow all instructions in this manual con[...]

weight on the seat detected by the occupant classification sensor and the belt tension de- tected on the seat belt, the advanced air bag system determines whether the front passenger air bag should be automatically turned OFF as required by the regulations. Front passenger seat adult occupants who are properly seated and using the seat belt as out-[...]

If a malfunction occurs in the front passenger air bag system, the supplemental air bag warning light , located in the meter and gauges area on the driver’s side of the instrument panel, will blink. Have the system checked by a NISSAN dealer. Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- in[...]

Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact and rollover supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain and roll- over air bags are located in the side roof rails in all 3 rows. These systems are designed to meet voluntary guidel[...]

WARNING ● Do not place any objects near the seat- back of the front seats. Also, do not place any objects (an umbrella, bag, etc .) between the front door finisher and the front seat. Such objects may become dangerous projectiles and cause injury if a side air bag inflates. ● Right after inflation, several side air bag and curtain and rollover [...]

● If you need to dispose of a pretensioner or scrap the vehicle, contact a NISSAN dealer. Incorrect disposal procedures could cause personal injury. The pretensioner system may activate with the supplemental air bag system in certain types of collisions. Working with the seat belt retractor, the pretensioner helps tighten the seat belt when the v[...]

SUPPLEMENT AL AIR BAG W ARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits for the air bag systems, preten- sioners and all related wiring. When the ignition switch is placed in the ON or ST ART position, the supplemental air bag warn- ing light illuminates for about 7 seconds and then t[...]

MEMO Safety—Seats, seat belts and supplemental restraint system 1-73[...]

2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 4 Speedometer and odometer . . ...................2 - 5 T achometer ....................................2 - 6 Engine coolant temperature gauge ...............2 - 6 Fuel gauge ....................................[...]

Map pockets .................................. 2-42 Seatback pocket .............................. 2-42 Overhead console ............................. 2-43 Cup holders .................................. 2-44 2nd row center console (if so equipped) ......... 2-46 Cargo area storage bin ......................... 2-47 Luggage hooks ...................[...]

1. V ents (P . 4-39) 2. Headlight/fog light/turn signal switch (P . 2-30) 3. Steering wheel switch for audio control/Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-94, P . 4-96, 4-111) 4. Instrument brightness control (P . 2-33) 5. Driver supplemental air bag/horn (P . 1-57, P . 2-34) 6. Meters, gauges and warning/indicator lights (P[...]

15. Hazard lights (P . 6-2) 16. Climate controls (P . 4-40) 17. P ower outlet/cigarette lighter (accessory) (P . 2-38) 18. Heated seat switch (if so equipped) (P . 2-34) 19. V ehicle Dynamic Control (VDC) off switch (P . 5-33) 20. Shift selector (P . 5-14) 21. Front passenger air bag status light (P . 1-66) 22. P ower outlet (P . 2-38) 23. 4WD shif[...]

1. W arning/indicator lights 2. T achometer 3. Engine coolant temperature gauge 4. V oltmeter 5. Fuel gauge 6. Speedometer 7. Automatic transmission fluid tempera- ture gauge 8. Odometer/T win trip odometer/V ehicle Information Display 9. Engine oil pressure gauge WIC1243 METERS AND GAUGES 2-4 Instruments and controls[...]

1. Speedometer 2. Odometer/twin trip display 3. Change button SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer records the total distance the ve- hicle has been driven. The twin t[...]

T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm) . Do not rev the engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce en- gine speed. Operating the engine in the red zone may cause serious engine damage. ENGINE COOLANT TEMPERA TURE GAUGE The gauge in[...]

FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition key is turned to OFF . The low fuel warning light comes on when the amount of fuel in the tank is getting low . Refill the fuel [...]

CAUTION ● This gauge is not designed to indicate low engine oil level. Use the dipstick to check the oil level. (See “Engine oil” in the “Maintenance and do-it-yourself” section.) ● If the gauge needle does not move with the proper amount of engine oil, have the vehicle checked by a NISSAN dealer. Continued vehicle operation in such a c[...]

CAUTION ● This gauge is not designed to indicate low automatic transmission fluid level. Use the dipstick to check the fluid level. (See “5-speed automatic transmission fluid” in the “Maintenance and do-it- yourself” section.) ● If the gauge indicates automatic trans- mission fluid temperature over the nor- mal range, stop the vehicle a[...]

COMP ASS DISPLA Y Push the or button for about 1 sec- ond when the ignition switch is placed in the ON position to toggle the compass direction display 䊊 1 on or off. The display will indicate the direction that the vehicle is heading. N: North E: East S: South W: West If the display reads “C”, calibrate the compass by driving the vehicle in [...]

Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 5 second[...]

1. With the display turned on, press and hold the button for about 10 seconds. The “CAL ” icon in the compass display will illu- minate. 2. Calibrate the compass by driving the vehicle one and a half circles at a maximum speed of 6 MPH (10 km/h). 3. After completing the circles, the display should return to normal. ● If the compass deviates f[...]

or Anti-lock Braking System (ABS) warning light 4WD warning light ( model) High beam indicator light (Blue) Automatic Transmission check warning light Low fuel warning light Malfunction indicator light (MIL) Automatic transmission park warning light ( model) Low tire pressure warning light Security indicator light or Brake warning light Master warn[...]

W ARNING LIGHTS For additional information on warnings and indi- cators, see “V ehicle information display” later in this section. or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is opera[...]

Parking brake indicator When the ignition switch is placed in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, st[...]

If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine and allow it to cool. If the light remains on after checking the oil and coolant, stop the en- gine immediately and call a NISSAN dealer or other authorized repair shop. This light is not designed to indicate a low oil or low coolant level. Ch[...]

Low tire pressure warning: If the vehicle is being driven with low tire pressure, the warning light will illuminate. A CHECK TIRE PRESSURE warning also appears in the vehicle information dis- play.If you select the tire pressure informa- tion in the display (if so equipped) , the LOW PRESSURE warning message will be dis- played. The tire pressure f[...]

● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing ti[...]

WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag systems and/or pretensioner systems will not op- erate in an accident. T o help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible. INDICA T OR LIGHTS For additional informati[...]

– avoid steep uphill grades. – if possible, reduce the amount of cargo being hauled or towed. The Malfunction Indicator Light may stop blinking and come on steady. Have the vehicle inspected by a NISSAN dealer. Y ou do not need to have your vehicle towed to the dealer. CAUTION Continued vehicle operation without hav- ing the emission control sy[...]

K ey reminder chime A chime sounds if the driver’s door is opened while the key is left in the ignition switch. Remove the key and take it with you when leaving the vehicle. Light reminder chime With the ignition switch placed in the OFF posi- tion, a chime sounds when the driver’s door is opened if the headlights or parking lights are on. T ur[...]

The icons at the bottom of the display screen show the options available: ENTER — Press the INFO button to select a highlighted option. NEXT — Rotate the INFO button to high- light an option. Warning mode The warning mode can be selected to view any warnings that may be present. Once the screen is selected you have the option of skipping the wa[...]

V ehicle information display warnings and indicators 1. Door and liftgate open warning 2. Lock warning (NISSAN Intelligent Key 姞 model) 3. Low fuel warning 4. Low windshield-washer fluid warning 5. No key warning (NISSAN Intelligent Key 姞 model) 6. Parking brake warning 7. Shift P warning (NISSAN Intelligent Key 姞 model) 8. Cruise main switch[...]

10. NISSAN Intelligent Key 姞 battery discharge indicator (NISSAN Intelligent Key 姞 model) 11. T ransfer 4L O position indicator ( model) 12. 4WD shift indicator ( model) 13. Automatic transmission position indicator 14. Loose fuel cap warning 15. Check tire pressure waning Door and liftgate open warning This warning illuminates when a door, the[...]

Cruise main switch indicator This indicator illuminates when the cruise control main switch is pushed. The indicator turns off when the main switch is pushed again. When the cruise main switch indicator illuminates, the cruise control system is operational. Cruise set switch indicator light The light comes on while the vehicle speed is controlled b[...]

Y our vehicle has two types of security systems: ● V ehicle security system ● NISSAN V ehicle Immobilizer System VEHICLE SECURITY S Y STEM The vehicle security system provides visual and audible alarm signals if someone opens the doors when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is [...]

● If the key is turned slowly when locking the driver’s door, the system may not arm. Furthermore, if the key is turned beyond the vertical position toward the unlock position to remove the key, the system may be disarmed when the key is removed. If the indicator light fails to glow for a period of time, unlock the door once and lock it again. [...]

Security indicator light The security indicator light blinks whenever the ignition switch is placed in the L OCK, OFF or ACC position. This function indicates the NISSAN V e- hicle Immobilizer System is operational. If the NISSAN Vehicle Immobilizer System is mal- functioning, the light will remain on while the ignition switch is placed in the ON p[...]

CAUTION ● Do not operate the washer continu- ously for more than 30 seconds. ● Do not operate the washer if the windshield-washer reservoir is empty. ● Do not fill the windshield-washer reser- voir with washer fluid concentrates at full strength. So methyl alcohol based windshield-washer fluid concentrates may permanently stain the grille if [...]

T o defrost the rear window glass and outside mirrors: Start the engine and push the rear window de- froster switch. The rear window defroster indica- tor light on the display screen comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes. CAUTION When cleaning the [...]

Autolight system The autolight system allows the headlights to be set so they turn on and off automatically. The autolight system can: ● T urn on the headlights, front parking, tail, license plate and instrument panel lights au- tomatically when it is dark. ● T urn off all the lights when it is light. ● Keep all the lights on for a period of [...]

Be sure you do not put anything on top of the autolight sensor 䊊 1 located in the top side of the instrument panel. The autolight sensor controls the autolight ; if it is cov- ered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the ignition switch placed in[...]

DA YTIME RUNNING LIGHT S Y STEM (Canada only) The headlights automatically illuminate at a re- duced intensity when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position or in the position. T urn the headlight switch to the position for full illumination when driving [...]

FOG LIGHT SWIT CH (if so equipped) T o turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position. T o turn the fog lights on with the headlight switch in the AUTO position, the headlights must be on, then turn the fog light switch to the position. T o turn the fog lights off, turn the fog ligh[...]

WARNING Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have an inability to feel pain in body parts that contact the seat. Use of the seat heater by such people could result in se- rious injury. CAUTION ● Do not use the seat heater for extended periods or when no one is us[...]

NO TE: The heated steering wheel switch is equipped with a 30 minute timer. After the switch has been activated for 30 minutes, the system will automatically turn off. If the surface temperature of the steering wheel is above 68°F (20°C) when the switch is turned on, the system will not heat the steering wheel. This is not a malfunction. The vehi[...]

The rear sonar system can be disabled by push- ing the OFF switch. When the system is disabled, the indicator light on the switch will illuminate. The system will automatically reset the next time the ignition switch is placed in the ON position. See “Rear sonar system” in the “Starting and driving” section. WARNING ● The front sonar syst[...]

T ow mode should be used when pulling a heavy trailer or hauling a heavy load. Driving the vehicle in the tow mode with no trailer/load or light trailer/light load will not cause any damage. How- ever, fuel economy may be reduced, and the transmission/engine driving characteristics may feel unusual. Press the tow mode switch to activate tow mode. T[...]

The power outlets are for powering electrical accessories such as cellular telephones. They are rated at 12 volt, 120W (10A) maximum. The power outlets are powered only when the ignition switch is in the ACC or ON position. Open the cap to use a power outlet. CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certa[...]

INSTRUMENT P ANEL ST ORAGE TRA Y S WARNING Do not place sharp objects in the trays to help prevent injury in an accident or sud- den stop. CONSOLE BO X Console box storage trays Console box storage Pull up on the lever 䊊 1 to open the console box lid 䊊 2 . Center stack storage LIC1183 LIC1369 LIC1370 ST ORAGE 2-40 Instruments and controls[...]

Console box lock Use the master key to lock 䊊 1 or unlock 䊊 2 the console box. GL OVE BOX Open the glove box by pulling the handle. Use the master key when locking 䊊 1 or unlocking 䊊 2 the glove box. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. SUNGLASSES HOLDER T o open the sunglas[...]

CAUTION ● Do not use for anything other than sunglasses. ● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight. The heat may damage the sunglasses. MAP POCKETS SEA TBACK POCKET The seatback pocket is located on the back of the driver seat. The pocket can be used to store maps. LIC1195 LIC0575 2-42 Instruments and[...]

OVERHEAD CONSOLE Storage bins WARNING Keep storage bins closed while driving to help prevent injury in an accident or a sudden stop. Push the button to open a storage bin. Push the lid up to close. Small bin LIC0568 Medium bin (if so equipped) LIC0569 Large bin LIC0570 Instruments and controls 2-43[...]

CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident. P osition the arm on the adjustable cup holder so that the cup is held securely. T [...]

2nd row center console (if so equipped) LIC0555 2nd row bench (if so equipped) LIC0556 3rd row LIC0557 Instruments and controls 2-45[...]

CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers. 2ND ROW CENTER CONSOLE (if so equipped) Pull up on the lever to open the console box lid. Removing the 2nd row center console b[...]

T o reinstall the 2nd row center console box: 1. Slide the console box over the base toward the rear of the vehicle. 2. Push down to lock the console box in place. 3. Replace the cup holder tray. CARGO AREA ST ORAGE BIN T o open the cargo area storage bin, pull down on the tab and pull the lid off. CAUTION Placing additional items in the area speci[...]

T o access the floor storage area, push down 䊊 1 to raise the handle, then pull up on the handle 䊊 2 to lift the luggage board. LUGGAGE HOOKS The luggage hooks can be used to secure cargo with ropes or other types of straps. WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place carg[...]

Floor hooks Do not apply a load of more than 110 lb (490 N) to a single hook. ROOF RACK LTI0090 LIC1177 Instruments and controls 2-49[...]

WARNING ● Drive extra carefully when the vehicle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack. ● Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sudden or abnor- mal handling maneuvers. ● Roof rack load shou[...]

POWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and become[...]

Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window. T o open the window , push the switch and hold it down 䊊 1 . T o close the window, pull the switch up 䊊 2 . Rear power window switch The rear power window switches open or close only the corresponding windows. T o open t[...]

Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs. WARNING There are some small distances immedi- ately before the[...]

The power vent windows operate when the igni- tion switch is placed in the ON position, or for a period of time after the ignition switch is placed in the OFF position. If the driver’s or passenger’s door is opened during this period of time, the power to the vent windows is cancelled. MANUAL VENT WINDOWS (if so equipped) T o open a manual vent[...]

T o open or close the moonroof part way , push the switch in any direction 䊊 5 while the moonroof is sliding open or closed to stop it in the desired position. Tilting the moonroof T o tilt the moonroof up, push the tilt switch to- ward the up position 䊊 1 . When the moonroof is open, it will automatically close and then tilt up. T o tilt the m[...]

Sunshade Open and close the sunshade by sliding it for- ward or backward. If the moonroof does not close Have your NISSAN dealer check and repair the moonroof. The interior light has a three-position switch and operates regardless of ignition switch position. When the switch is in the ON position 䊊 1 , the interior lights illuminate, regardless o[...]

NO TE: The footwell lights (if so equipped) and door step lights illuminate when the driver and passenger doors are open regardless of the interior light switch position. These lights will turn off automatically after a period of time while doors are open to prevent the battery from becoming dis- charged. CAUTION Do not use for extended periods of [...]

T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. The cargo light on the overhead trim has a three- position switch. T o operate, push the switch to the desired position. ON: The light is ill[...]

WARNING ● Do not use the HomeLink 姞 Universal T ransceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982) . A ga- rage door opener which cannot detect an object in the path of a closing gara[...]

3. Press and hold the programmed HomeLink 姞 button and observe the indicator light. ● If the indicator light 䊊 1 is solid/continuous, programming is complete and your device should acti- vate when the HomeLink 姞 button is pressed and released. ● If the indicator light 䊊 1 blinks rapidly for two seconds and then turns to a solid/continuo[...]

press and hold the desired HomeLink 姞 but- ton while you press and re-press (“cycle”) your hand-held transmitter every two sec- onds until the frequency signal has been learned. The HomeLink 姞 indicator light will flash slowly and then rapidly after several seconds upon successful training. DO NO T release until the HomeLink 姞 indicator l[...]

REPROGRAMMING A SINGLE HOMELINK 姞 BUTT ON T o reprogram a HomeLink 姞 Universal T ransceiver button, complete the following: 1. Press and hold the desired HomeLink 姞 but- ton. DO NOT release the button. 2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink 姞 button, proceed with “Program- ming HomeLink[...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent K ey 姞 (if so equipped) ..........3 - 2 NISSAN Vehicle Immobilizer System keys .........3 - 4 Doors ............................................3 - 5 Locking with key ................................3 - 5 Locking with inside lock kno[...]

1. T wo master keys (black) with transpon- der chip and chrome NISSAN brand symbol on one side 2. V alet key (black) with transponder chip 3. K ey number plate 4. T ransponder chip A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a[...]

Never leave these keys in the vehicle. As many as 4 Intelligent Keys can be registered and used with one vehicle. The new keys must be registered by a NISSAN dealer prior to use with the Intelligent Key and NISSAN V ehicle Immobi- lizer System of your vehicle. Since the registra- tion process requires erasing all memory in the Intelligent K ey comp[...]

CAUTION Always carry the mechanical key installed in the Intelligent Key slot. See “Doors” in this section and “Storage” in the “Instruments and controls” section of this manual. V alet hand-off When you have to leave a key with a valet, give them the Intelligent K ey itself and keep the me- chanical key with you to protect your belongi[...]

When the doors are locked using one of the following methods, the doors can not be opened using the inside or outside door handles. The doors must be unlocked to open the doors. WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent per[...]

L OCKING WITH INSIDE L OCK KNOB T o lock the door without the key , move the inside lock knob to the lock position 䊊 1 , then close the door. T o unlock the door without the key, move the inside lock knob to the unlock position 䊊 2 . L OCKING WITH POWER DOOR L OCK SWIT CH T o lock all the doors without a key , push the door lock switch (driver?[...]

5. The ignition switch must be placed in the OFF and ON position again between each setting change. When the automatic door unlock system is deac- tivated, the doors do not unlock when the ignition switch is placed in the OFF position (models with Intelligent Key system) or when the key is re- moved from the ignition switch (models without Intellig[...]

Be sure to remove the key from the vehicle before locking the doors. The keyfob can operate at a maximum distance of approximately 33 ft (10 m) from the vehicle. The effective distance depends upon the conditions around the vehicle. As many as 5 keyfobs can be used with one vehicle. For information concerning the purchase and use of additional keyf[...]

● When the button is pressed with all doors locked, the hazard warning lights flash twice and the horn beeps once as a re- minder that the doors are already locked. ● If a door is open and you press the button, the doors will lock but the horn will not beep and the hazard warning lights will not flash. The horn may or may not beep. For vehicles[...]

The door windows will open while pressing the button on the keyfob. The door windows cannot be closed by using the keyfob. Operating the power liftgate (if so equipped) Press and hold the button on the keyfob for about 0.5 seconds to open or close the liftgate. The hazard warning lights flash and a chime sounds to indicate the power open or power c[...]

Using the interior lights Press the button on the keyfob once to turn on the interior lights and puddle lights (if so equipped) . For additional information, refer to “Interior light” in the “Instruments and controls” section in this manual. Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the key[...]

WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● The Intelligent Key transmits radio waves when the buttons are pressed. The FA A advises the radio waves may affect aircraft navigation and comm[...]

As many as 4 Intelligent Keys can be registered and used with one vehicle. For information about the purchase and use of additional Intelligent K eys, contact a NISSAN dealer. CAUTION Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical components, to com[...]

OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 䊊 1 . When the Intelligent Key battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent K ey operating range becomes narrower, and the Intelligent Ke[...]

● T o prevent the Intelligent K ey from being left inside the vehicle, make sure you carry the Intelligent Key with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. NISSAN INTELLI[...]

NO TE: ● Doors lock with the door handle request switch while the ignition switch is not in the L OCK position. ● Doors do not lock by pushing the door handle request switch while any door is open. However, doors lock with the me- chanical key even if any door is open. ● Doors do not lock with the door handle request switch with the Intellige[...]

Unlocking doors 1. Carry the Intelligent K ey . 2. Push the door handle request switch. 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door handle request switch again within 30 seconds to unlock all doors. For power liftgate opening: 1. Carry the Intelligent K ey . 2. Pull the power liftgate handle or press[...]

The remote keyless entry function will not func- tion under the following conditions: ● When the Intelligent Key is not within the operational range. ● When the doors or the rear liftgate are open or not closed securely. ● When the Intelligent Key battery is dis- charged. CAUTION When locking the doors using the Intelli- gent Key, be sure not[...]

Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 5 sec- onds to unlock all doors. All doors will be locked automatically unless one of the following operations is performed within 1 minute after pressing the button: ● Opening any doors. ● Pushing the ignition [...]

Releasing the rear liftgate Press the button for longer than 0.5 sec- onds to open the rear liftgate. The rear liftgate release button will not operate when the ignition switch is in the ON position. Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pressing and holding the[...]

Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the Intelligent K ey . NO TE: If you change the horn beep and light flash feature with the Intelligent Key, the display screen (if so equipped) will not show the current mode and cannot be used to change the mode. Use the Intelligent Key to return to the pr[...]

TROUBLESHOO TING GUIDE V erify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected. Symptom Possible Cause Remedy When stopping the engine The SHIFT P warning appears on the dis- play and the inside warning c[...]

䊊 1 Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly . 䊊 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. When closing the hood, lower it slowly and make sure it locks into place. WARNING ● Make sure the hood is compl[...]

OPERA TING THE MANUAL LIFT GA TE (if so equipped) The power door lock system allows you to lock or unlock all doors including the liftgate simultane- ously . T o open the liftgate, pull up on the handle. T o close, lower and push the liftgate down se- curely . OPERA TING THE POWER LIFT GA TE (if so equipped) NO TE: T o open, close or reverse the po[...]

● The keyfob button must be held for 0.5 sec- ond before the liftgate opens. ● The liftgate must be unlocked to open it with the outside opener handle. ● The switch on the rear pillar cannot be used to open the liftgate. A warning chime will sound if the shift selector is moved out of P (Park) during a power open operation. Power Close: The p[...]

Safe Mode: If the liftgate gas stays 䊊 1 lose pressure, the power liftgate safe mode is activated. When the safe mode is activated, the liftgate slowly closes. A continuous warning chime sounds until the liftgate is in the fully down position. Then the liftgate will be pulled to the closed and latched position by a motor. The power liftgate canno[...]

LIFT GA TE RELEASE WARNING ● Always be sure the liftgate has been closed securely to prevent it from open- ing while driving. ● Do not drive with the liftgate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Ex- haust gas” in the “Starting and driving” section of this manual. CAUTION ● If the power lif[...]

T o open, pull up on the smaller outside handle to release the glass hatch, then pull up on the glass hatch. T o close, lower and push the glass hatch down securely. NO TE: The liftgate must be unlocked in order to open the glass hatch. WARNING Do not drive with the glass hatch open. This could allow dangerous exhaust gases to be drawn into the veh[...]

● Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. T o reduce the risk of serious injury or death when filling portable fuel containers: – Always place the container on the ground when filling. – Do not use electronic devices[...]

Loose Fuel Cap warning The LOOSE FUEL CAP warning appears in the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. T o turn off the warning, perform the following: 1. Remove and install the fuel-filler cap as pre- viou[...]

The accelerator and brake pedals can be ad- justed for driving comfort. Use the pedal adjusting switch to adjust the brake and accelerator pedal position away from the driver 䊊 1 or toward the driver 䊊 2 . The brake and accelerator pedals cannot be ad- justed separately. WARNING Do not adjust the pedal position while driving. Y ou could lose co[...]

䊊 1 T o block glare from the front, swing down the main sun visor. 䊊 2 T o block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. 䊊 3 T o extend the sun visor, slide in or out as needed. CAUTION ● Do not store the sun visor before return- ing the extension to its original position. ● Do[...]

AUT OMA TIC ANTI-GLARE REARVIEW MIRROR (if so equipped) The inside mirror is designed so that it automati- cally dims during night time conditions and ac- cording to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is in the ON position. The indicator light will ill[...]

T ype B and T ype C The indicator light 䊊 2 will illuminate when the automatic anti-glare feature is operating. T o turn off the automatic anti-glare feature, press: ● the O button for inside mirrors without compass. ● the button for inside mirrors with compass. The indicator light will turn off. T o turn on the automatic anti-glare feature a[...]

OUTSIDE MIRRORS The outside mirror remote control will operate only when the ignition switch is placed in the ACC or ON position. Rotate the round switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired po- sition pushing the round switch. WARNING ● Objects viewed in the outside mirror on the passenger side are closer t[...]

P ower folding outside mirrors (if so equipped) CAUTION Do not manually fold the power folding mirrors. Manually folding the mirrors can damage the mirrors. Press the switch to open or close the mirrors. If one of the mirrors are manually operated or bumped, the mirror body can become loose at the pivot point. T o correct electronic mirror op- erat[...]

The automatic drive positioner system has two features: ● Memory storage function ● Entry/exit function MEMOR Y ST ORAGE FUNCTION T wo positions for the driver’s seat, accelerator and brake pedals, and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the memory sys- tem. 1. Place the shift[...]

2. While the indicator light for the memory switch being set is illuminated for 5 sec- onds, press the button on the keyfob. The indicator light will blink. After the indica- tor light goes off, the keyfob is linked to that memory setting. With the key removed from the ignition switch or the ignition switch is moved to OFF , press the button on the[...]

The entry/exit function can be adjusted or can- celed. For vehicles with navigation system, see “Comfort & convenience settings” in the “Moni- tor, climate, audio, phone and voice recognition systems” section of this manual. For vehicles without navigation system, see your NISSAN dealer. Restarting the entry/exit function If the battery[...]

MEMO 3-40 Pre-driving checks and adjustments[...]

4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen without Navigation System (if so equipped) ..................4 - 4 How to use the NISSAN controller ...............4 - 5 How to select menus on the screen ..............4 - 6 How to use the ST A TUS button ..................4 - 6 How to use the INF[...]

FM/AM/SA T radio with CD/DVD player (if so equipped) ............................... 4-68 Digital Versatile Disc (DVD) Player Operation (models with Navigation System) ...... 4-76 USB interface (models without Navigation System) (if so equipped) ....................... 4-79 USB interface (models with Navigation System) ................ 4-81 iP od ?[...]

Using the system ............................. 4-140 Speaker Adaptation function ................... 4-142 T roubleshooting guide ........................ 4-144[...]

WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice a[...]

CAUTION ● The glass display screen may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury. ● T o clean the display, never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or deteriorate[...]

HOW T O SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details: 1. Header: Shows the path used to get to the current screen (for example, pres[...]

Fuel economy Press the INFO button, then select the “Fuel Economy” key using the NISSAN controller to display Average Fuel Economy, Distance to Empty and Fuel Economy History . Distance to empty (MI or km) The Distance to Empty (DTE) mode provides you with an estimation of the distance that can be driven before refueling. The DTE is constantly [...]

Maintenance items Press the INFO button and select the “Mainte- nance” key using the NISSAN controller; the maintenance information will be displayed on the screen. Changing the maintenance interval Select one of the Reminder keys (Engine Oil, Oil Filter, Tire or Other Reminder) using the NISSAN controller to display the screen to change the ma[...]

T o return to the previous display after the MAIN- TENANCE NO TICE screen is displayed, press the BACK button. The MAINTENANCE NOTICE screen displays each time the key is turned ON until one of the following conditions are met: ● The “Reset” key is selected. ● The “Interval Reminder ON” key is set to OFF (indicator light not illuminated[...]

Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the map background. Use the NISSAN controller to adjust the brightness to darker or brighter and the con- trast to lower or higher. The new settings are automatically saved when you exit the setting screen by pressing the BACK but[...]

Switch beeps settings Select the “Switch Beeps” key to adjust the switch beeps settings. With this option on (indicator light illuminated) , a beep will sound if any control panel button is pressed. Camera settings Select the “Camera” key . The Camera settings screen will appear. When this option is on (indicator light illumi- nated) , pred[...]

Daylight Savings Time: When this item is enabled (indicator light illumi- nated) , daylight savings time is on. T o turn off the daylight savings time, touch the “ON” key; the amber indicator light will go out. Time Zone: Select the “Time Zone” key; the Time Zone screen will appear. Select one of the following zones, depending on the curren[...]

Adjust Clock: T o adjust the time, select the + or - key for the hour until the desired number is reached. Repeat the process for the minutes on the line below . T o accept the changes made and return to the Clocks Settings screen, select the OK key . Comfort & Convenience settings Select the “Comfort & Conv.” key by using the NISSAN co[...]

Selective Door Unlock: When this item is turned on, only the driver’s door is unlocked first after the door unlock operation. When the door handle request switch on the driver’s or front passenger’s side door is pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the door unlock operation is [...]

Select Language: Select the “English” key , the “Français” key or the “Español” key to change the language shown on the display. Select Units: Select the “US” (mi, °F , MPG) key or the “Metric” (km, °C, L/100 km) key to change the units shown on the display. OFF BUTT ON T o change the display brightness, press the OFF button[...]

1. DEST button* 2. NISSAN controller (P . 4-17) 3. ROUTE button* 4. OFF brightness control button (P . 4-30) 5. DISPLA Y button (P . 4-23) 6. INFO button (P . 4-20) 7. SETTING button (P . 4-23) 8. PHONE button** 9. VOICE button* 10. BACK (previous) button (P . 4-17) 11. ST A TUS button (P . 4-19) 12. MAP button* *For Navigation system control butto[...]

HOW T O USE THE NISSAN CONTROLLER Use the NISSAN controller to choose an item on the display screen. Highlight an item on the dis- play using the main directional buttons 䊊 2 (cer- tain Navigation System functions use the addi- tional directional buttons 䊊 6 ) or the center dial 䊊 3 . Then press the ENTER button 䊊 1 to select the item or pe[...]

T ouch screen operation With this system, the same operations as those for the NISSAN controller are possible using the touch screen operation. Selecting the item: T ouch an item to select. T o select the “Naviga- tion” key, touch the “Navigation” key 䊊 1 on the screen. T ouch the “BACK” key 䊊 2 to return to the previous screen. Adj[...]

● Delete: Deletes the last inputted character with one touch. T ouch and hold the “Delete” key to delete all of the characters. ● OK: Completes the character input. T ouch screen maintenance If you clean the display screen, use a dry , soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth[...]

HOW T O USE THE INFO BUTT ON Press the INFO button; the display screen shows vehicle and navigation information for your con- venience. The information shown on the screen should be a guide to determine the condition of the vehicle. See the following for details: Fuel economy Press the INFO button, then select the “Fuel Economy” key using the N[...]

Fuel economy record Press the INFO button, then select the “Fuel Economy” key, then select the “Fuel Eco History” key using the NISSAN controller. The average fuel consumption history will be displayed in a graph form along with the average fuel for the previous Reset-to-Reset period. Maintenance items Press the INFO button and select the ?[...]

Displaying the maintenance notice re- minder Select the “Interval Reminder ON” key to display the MAINTENANCE INFORMA TION automati- cally at the set maintenance interval. The indica- tor light will illuminate when it is ON. The MAINTENANCE NO TICE screen will be au- tomatically displayed as shown when both of the following conditions are met: [...]

HOW T O USE THE SETTING BUTT ON When the SETTING button is pressed, the Set- tings screen will appear on the display . Y ou can select and/or adjust several functions, features and modes that are available for your vehicle. Use the NISSAN controller to select each item to be set. Display settings Select the “Display” key . On the screen above, [...]

Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the display background. Use the NISSAN controller to adjust the brightness to darker or brighter and the con- trast to lower or higher. The new settings are automatically saved when you exit the setting screen by pressing the BACK[...]

Color theme: Select the “Display” key, then select the “Color Theme” key . The Color Theme select screen will appear. Select the key for the desired color. The appear- ance of the background, arrows and bars will change for all screens accordingly. Y ou can choose a black, blue or red color theme. Clock The following display will appear aft[...]

Time Zone: Select the “Time Zone” key; the Time Zone screen will appear. Select one of the following zones, depending on the current location, by selecting the correct time zone key to enable that time zone (indicator light will illuminate for that location) . ● Pacific ● Mountain ● Central ● Eastern ● Atlantic ● Newfoundland ● Ha[...]

Comfort settings Select the “Others” key using the NISSAN con- troller, then select the “Comfort” key. The Com- fort settings screen will be displayed. Y ou can set the following operating conditions by selecting the desired item using the NISSAN controller. The indicator light (box at the right of the selected item) alternately turns on an[...]

Slide Driver Seat Back on Exit: Select to turn on or turn off the driver’s seat moving backward for easy exit when the ignition switch is in the OFF position and the driver’s door is opened. After getting into the vehicle and placing the ignition switch in the ACC position, the driver’s seat moves to the previous position. Return All Settings[...]

Select Units: Select the “US” (mi, °F , MPG) key or the “Metric” (km, °C, L/100 km) key to change the units shown on the display. V oice Recognition: For V oice Recognition settings, refer to “NISSAN V oice Recognition system” in this section. Camera settings Select the “Camera” key . The Camera settings screen will appear. When t[...]

V olume & beeps settings Navigation volume For navigation volume settings, refer to the sepa- rate Navigation System Owner’s Manual for infor- mation regarding these settings. Phone volume For phone volume settings refer to “Bluetooth 姞 Hands-Free Phone System with Navigation Sys- tem” in this section. Switch beeps With this option on ([...]

USING THE IMAGE VIEWER When a compatible portable storage device is plugged into the USB jack located in the center console, compatible image files stored on the device can be viewed on the control panel de- vice. Connecting the portable storage device T o connect a portable storage device to the sys- tem so that images stored on it can be viewed, [...]

Viewing images in a slideshow T o view all of the images on the device in a slide- show , first enter the full screen mode while viewing one of the images. The slideshow control buttons are located on the right side of the screen. Select the play key to begin the slideshow . The images shown on the screen will periodically change at a given interva[...]

Slideshow order: Select the “Random” key to display the images in a random order during a slideshow. Select the “Order List” key to display the images in the order in which they are stored on the storage device. Select the “Back” key or press the BACK button on the control panel to return to the slideshow screen. When the shift selector[...]

HOW T O READ THE DISPLA YED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line 䊊 A are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body. ● Red line 䊊 1 : approx. 1.5 ft (0.5 m) ● Y ellow line 䊊 2 : approx. 3 ft (1 m) ● Green line ?[...]

● The distance guide line and the vehicle width line should be used as a refer- ence only when the vehicle is on a level paved surface. The distance viewed on the monitor is for reference only and may be different than the actual dis- tance between the vehicle and dis- played objects. ● When backing up the vehicle up a hill, objects viewed in t[...]

4. Maneuver the steering wheel to make the vehicle width guide lines 䊊 D parallel to the parking space 䊊 C while referring to the pre- dicted course lines. 5. When the vehicle is parked in the space completely , move the shift selector to the P (Park) position and apply the parking brake. DIFFERENCE BETWEEN PREDICTED AND ACTUAL DIST ANCES The d[...]

Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.0 m) distance on the hill is the place 䊊 B . Note that any object on the hill is clos[...]

Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display. However, the position 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. HOW T O ADJUST THE SCREE[...]

● Objects on the monitor may not be clear in a dark place or at night. This is not a malfunc- tion. ● If dirt, rain or snow attaches to the camera, the RearView Monitor may not clearly display objects. Clean the camera. ● Do not use wax on the camera window. Wipe off any wax with a clean cloth damp- ened with mild detergent diluted with water[...]

1. Driver’s temperature control dial/AUT O button 2. A/C ON/OFF button 3. Fan speed control (increase) 4. Front window defroster button 5. MODE button 6. Passenger’s temperature control dial/ DUAL button 7. System OFF 8. Fan speed control (decrease) 9. Rear window defroster button 10. Air recirculation button WARNING ● The air conditioner coo[...]

● The temperature of the passenger compart- ment will be maintained automatically. Air flow distribution, fan speed and A/C on/off are also controlled automatically. ● A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly . This does not indicate a mal- function. Dehumidified defrosting or defogg[...]

OPERA TING TIPS ● When the engine coolant temperature and outside air temperature are low , the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant tempera- ture warms up, air flow from the foot outlets will operate normally . The sunload sensor 䊊 1 , located on the [...]

1. Rear fan speed control dial 2. Rear airflow mode buttons 3. Rear temperature control dial CONTROLS Fan control dial The fan control dial turns the rear vent fan on and off and controls fan speed. Airflow mode buttons The airflow mode buttons select where the air flow is directed from. T emperature control dial The temperature control dial allows[...]

RADIO Place the ignition switch in the ACC or ON position and press the VOL (volume)/ON·OFF (power) knob to turn the radio on. If you listen to the radio with the engine not running, the ignition switch should be placed in the ACC position. Radio reception is affected by station signal strength, distance from radio transmitter, build- ings, bridge[...]

SA TELLITE RADIO RECEPTION (if so equipped) When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly . This is not a mal- function. W ait more than 10 minutes with satellite radio ON and the vehicle outside of any metal or large building for satellite radio to receive all of the[...]

● The CD player sometimes cannot func- tion when the compartment tempera- ture is extremely high or low. Decrease/increase the temperature before use. ● Do not expose the CD to direct sun- light. ● CDs that are in poor condition or are dirty, scratched or covered with finger- prints may not work properly. ● The following CDs may not work pr[...]

● The following CDs/DVDs are not guar- anteed to play: ● Copy control compact disc s (CCCD) ● Recordable compact disc s (CD-R) ● Rewritable compact disc s (CD-RW) ● Recordable compact disc s (DVD±R, DVD±R DL) ● Rewritable compact discs (DVD±RW, DVD±RW DL) ● Do not use the following CDs/DVDs as they may cause the CD/DVD player to m[...]

● This copyright protected technology cannot be used without a permit from Macrovision Corporation. It is limited to personal use, etc., as long as the permit from Macrovision Corporation is not issued. ● Modifying or disassembling is prohib- ited. ● Dolby digital is manufactured under li- cense from Dolby Laboratories, Inc . ● Dolby and th[...]

● Partitioned USB devices may play correctly. ● Some characters used in other lan- guages (Chinese, Japanese, etc .) may not appear properly in the display. Us- ing English language characters with a USB device is recommended. General notes for USB use: ● The USB device may not function when the passenger compartment tempera- ture is extremel[...]

Bluetooth 姞 streaming audio (if so equipped) ● Some Bluetooth 姞 audio devices may not be recognized by the in-vehicle audio system. ● It is necessary to set up the wireless con- nection between a compatible Bluetooth 姞 audio device and the in-vehicle Bluetooth 姞 module before using the Bluetooth 姞 audio. ● Operating procedure of the[...]

* Windows 姞 , Windows Media 姞 and Windows Vista 姞 are registered trademarks and trademarks in the United States of America and other coun- tries of Microsoft Corporation of the USA . Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in t[...]

Specification chart : Supported media CD, CD-R, CD-RW , USB 2.0 Supported file systems CD, CD-R, CD-RW , ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista 姞 operating system-based computer) are not supported. UDF Bridge (UDF 1.0[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/USB device was inserted correctly . Check if the CD is scratched or dirty . Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the play[...]

CD, DVD or USB with Compressed Audio Files (models with Navigation System) The file types supported by this system are MP3, WMA , AAC/M4A and A TRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format. This format allows for near “CD qual[...]

Playback order: Music playback order of a CD, DVD or USB device with compressed audio files is as illus- trated. ● The folder names of folders not containing compressed audio files are not shown in the display . ● If there is a file in the top level of the disc/USB, “Root Folder” is displayed. ● The playback order is the order in which th[...]

Specification chart : Supported media CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW , DVD±R DL, USB 2.0 Supported file systems CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW , DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/DVD/USB device was inserted correctly . Check if the CD/DVD is scratched or dirty . Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, [...]

Compressed Video Files (models with Navigation System) Explanation of terms: ● DivX – DivX refers to the DivX 姞 codec owned by Div, Inc. used for a lossy compres- sion of video based on MPEG-4. ● A VI – AVI stands for Audio Video Interleave. It is standard file format originated by Micro- soft Corporation. A .divx encoded file can be save[...]

Requirements for Supporting Video Playback: Media CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW, DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660) , UDF1.5, UDF2.0 * ISO9660 Level 3 (packet writing) is not supported. * Files saved using th[...]

1. SEEK/CA T button 2. TRACK button 3. FM button 4. AM button 5. DISC button 6. SCAN button 7. RPT button 8. RDM button 9. TUNE/FLDR and AUDIO control knob (Bass, T reble, Fade and Balance) 10. AUX button 11. XM button* 12. Station select (1 - 6) buttons 13. CD eject button 14. VOL/ON·OFF control knob 15. FLDR button 16. TUNE button LHA2444 4-60 M[...]

*No satellite radio reception is available when the XM button is pressed to ac- cess satellite radio stations unless op- tional satellite receiver and antenna are installed and a SiriusXM Satellite Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. FM/AM/SA T RADIO WITH COMP ACT DISC (CD) PLA YER (if [...]

For information on how to use the NISSAN con- troller, see “How to use the NISSAN controller” in this section. Clock operation For additional information on setting the clock, see “ Adjusting the time” in this section. CD/MP3 display mode While listening to a CD or an MP3/WMA CD, certain text might be able to be displayed (when CD encoded w[...]

Press the BACK button to exit the CD text display screen. FM/AM/SA T radio operation FM/AM band select : Press the AM button to change to the AM band. Press the FM button to change the band as follows: FM1 ←→ FM2 When the FM or AM button is pressed with the ignition switch in the ACC or ON position, the radio will come on at the station last pl[...]

2. T une to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until a beep sound is heard. 3. The channel indicator will then come on and the sound will resume. Programming is now complete. 4. Other buttons can be set in the same man- ner. If the battery cable is disconnected, [...]

TUNE/FLDR knob While playing an MP3/WMA CD, turn the TUNE/FLDR knob right or left to scan forward or backward through available folders. This can also be performed using the TUNE and FLDR buttons. RPT button: Press the RPT button to change the play pattern as follows: CD: Repeat All ←→ 1 T rack Repeat CD with compressed audio files: Repeat All [...]

Before connecting a device to the auxiliary input jacks, turn off the power of the portable device. With a compatible device connected to the aux- iliary input jacks, press the AUX button until the AUX mode appears in the display . The output from the device will be played through the display (when the vehicle is in the (P) Park position and the pa[...]

1. SEEK/CA T button 2. TRACK button 3. AM/FM button 4. XM button* 5. SCAN button 6. RPT button 7. RDM button 8. TUNE/FLDR and AUDIO control knob (Bass, T reble, Fade and Balance) 9. DISC/AUX button 10. Station select (1 - 6) buttons 11. CD eject button 12. VOL/ON·OFF control knob 13. FLDR button 14. TUNE button LHA2445 Monitor, climate, audio, pho[...]

*No satellite radio reception is available when the XM button is pressed to ac- cess satellite radio stations unless op- tional satellite receiver and antenna are installed and a SiriusXM Satellite Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. FM/AM/SA T RADIO WITH CD/DVD PLA YER (if so equipped)[...]

For information on how to use the NISSAN con- troller, see “How to use the NISSAN controller” in this section. Display album cover art: When an audio source encoded with album cover art is played, the album cover art can be displayed on the screen. T o toggle this feature on or off, touch the “Display Album Cover Art” key. When the feature [...]

● Song displays the ID3 encoded tag of the song name. ● Album displays the ID3 encoded tag of the album name. ● Artist displays the ID3 encoded tag of the artist’s name. Some of this text might not display while playing a regular CD. FM/AM/SA T radio operation AM/FM band select : Press the AM/FM button to change the band as follows: AM → [...]

1. Choose the radio band AM, FM1 or FM2 using the FM·AM select button, or choose the satellite band XM1, XM2 or XM3 using the SA T button. 2. T une to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until the preset number is updated on the display and the sound is briefly m[...]

If the station broadcasts RDS information, the text information is automatically displayed. Compact disc (CD) player operation Place the ignition in the ACC or ON position and insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing. If the radio is already op[...]

CD menu T ouch the “Menu” key on the display while a CD or CD with compressed audio files is playing to bring up a list of options. Depending on the type of CD being played, the following options may be available: ● Play Mode This option allows you to alter the play pattern of the CD. T ouch the key of the mode you wish to apply . The modes c[...]

● Folder List The folders on the disc are displayed. Select the key of a folder name to begin playing tracks from that folder. ● T rack List The tracks on the disc are displayed. Select the key of a track name to begin playing that track. CD EJECT button: When the button is pressed with the com- pact disc loaded, the compact disc will be ejecte[...]

Before connecting a device to the auxiliary input jacks, turn off the power of the portable device. With a compatible device connected to the aux- iliary input jacks, press the DISC/AUX button repeatedly until the AUX mode appears in the display . The output from the device will be played through the display (when the vehicle is in the (P) Park pos[...]

DIGIT AL VERSA TILE DISC (DVD) PLA YER OPERA TION (models with Navigation System) Precautions Start the engine when using the DVD entertain- ment system. Movies will not be shown on the front display while the vehicle is in any drive position to reduce driver distraction. Audio is available when a movie is played. T o view movies on the front displ[...]

matically after a period of time. T o turn it on again, press the DISC-AUX button. DVD operation keys When the DVD is playing without the operation screen being shown, you may use the touch- screen to select items from the displayed video. Y ou may also use the NISSAN controller to select an item from the displayed video. When the op- eration scree[...]

● 10 Key Search (DVD-VIDEO, VIDEO CD, CD-DA , DVD-VR) Select the “10 Key Search” key to open the number entry screen. Input the number you want to search for and select the “OK” key. The specified Title/Chapter or Group/T rack will be played. ● Select No. (VIDEO CD) Select the “Select No.” key to open the number entry screen. Input [...]

USB INTERF ACE (models without Navigation System) (if so equipped) Connecting a device to the USB input jack CAUTION ● Depending on size and shape of USB device, the console lid may not fully close. Do not force console lid closed as this may damage USB device. ● Do not force the USB device into the USB port. Inserting the USB device tilted or [...]

SEEK/CA T and TRACK buttons: Press the SEEK/CA T button while an au- dio file on the USB device is playing to return to the beginning of the current track. Press the SEEK/CA T button several times to skip backward several tracks. Press the TRACK button while an audio file on the USB device is playing to advance one track. Press the TRACK button sev[...]

USB INTERF ACE (models with Navigation System) Connecting a device to the USB input jack CAUTION ● Depending on size and shape of USB device, the console lid may not fully close. Do not force console lid closed as this may damage USB device. ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into th[...]

SEEK/CA T and TRACK buttons: Press the SEEK/CA T button while an au- dio file on the USB device is playing to return to the beginning of the current track. Press the SEEK/CA T button several times to skip backward several tracks. Press the TRACK button while an audio file on the USB device is playing to advance one track. Press the TRACK button sev[...]

● Folder List/T rack List Displays the folder or track list. The “Movie Playback” key is also displayed in this list screen and enables you to switch to the movie playback mode. ● Play Mode Choose the preferred play mode using the NISSAN controller or the touchscreen. Movie file operation Park the vehicle in a safe location for the front se[...]

● Previous Chapter/Rewind: Select the key to skip the chapter(s) of the disc backward. The chapters will go back the number of times the key is selected. Press and hold the key to rewind the chap- ter. List : Select the “List” key on the movie file operation screen to display the file list. Settings: Select the “Settings” key to adjust th[...]

iP od 姞 * PLA YER OPERA TION WITHOUT NA VIGA TION S Y STEM (if so equipped) Connecting iP od 姞 CAUTION ● Depending on size and shape of the iPod 姞 and iPod 姞 cable, the console lid may not fully close. Do not force con- sole lid closed as this may damage the iPod 姞 and iPod 姞 cable. ● Do not force the iPod 姞 cable into the USB por[...]

Audio main operation Place the ignition switch in the ACC or ON position. Press the AUX button repeatedly to switch to the iPod 姞 mode. If the system has been turned off while the iP od 姞 was playing, pressing the VOL/ON·OFF control knob will start the iP od 姞 . AUX button: When the AUX button is pressed with the system off and the iPod 姞 [...]

iP od 姞 * PLA YER OPERA TION WITH NA VIGA TION S Y STEM (if so equipped) Connecting iP od 姞 CAUTION ● Depending on size and shape of the iPod 姞 and iPod 姞 cable, the console lid may not fully close. Do not force con- sole lid closed as this may damage the iPod 姞 and iPod 姞 cable. ● Do not force the iPod 姞 cable into the USB port. [...]

● iPod 姞 Nano - 5th generation (firmware ver- sion 1.0.1 or later) * Some features of this iPod 姞 may not be fully functional. Make sure that your iPod 姞 firmware is updated to the version indicated above. Audio main operation Place the ignition switch in the ACC or ON position. Press the DISC/AUX button repeatedly to switch to the iP od ?[...]

Interface: The interface for iP od 姞 operation shown on the vehicle center display is similar to the iP od 姞 in- terface. Use the NISSAN controller and the BACK button to play the iP od 姞 with your favorite settings. The touchscreen can also be used to control your favorite settings. The following items can be chosen from the menu list screen[...]

When the SEEK/CA T button or TRACK button is pressed for more than 1.5 sec- onds while the iP od 姞 is playing, the iP od 姞 will play while fast forwarding or rewinding. When the button is released, the iPod 姞 will return to the normal play speed. The NISSAN controller can also be used to se- lect tracks when the iP od 姞 is playing. Scrollin[...]

Connecting Bluetooth 姞 audio T o connect your Bluetooth 姞 audio device to the vehicle, follow the procedure below: 1. Press the SETTING button on the instru- ment panel. 2. Select the “Bluetooth” key . 3. Select the “Connect Bluetooth” key. 4. A screen will appear asking if you are con- necting the device to use with the hands- free pho[...]

Audio main operation T o switch to the Bluetooth 姞 audio mode, press the DISC/AUX button repeatedly until the Bluetooth 姞 audio mode is displayed on the screen. The controls for the Bluetooth 姞 audio are dis- played on the screen. Bluetooth 姞 audio settings T o adjust the Bluetooth 姞 audio settings, follow the procedure below: 1. Press th[...]

5. A list of the connected Bluetooth 姞 audio players is displayed. Select the name of the device you wish to edit. 6. The Device Name and Device Address are displayed on the screen. Select the “Select” key to make this device the active Bluetooth 姞 audio player. Select the “Edit” key to edit the details of the player, such as Device Nam[...]

1. SOURCE select switch 2. T uning switch 3. V olume control switch STEERING WHEEL SWIT CH FOR AUDIO CONTROL The audio system can be operated using the controls on the steering wheel. POWER on/off switch If you have the T ype A switch, with the ignition switch placed in the ACC or ON position, push the POWER switch to turn the audio system on or of[...]

iPod 姞 (if so equipped) : ● Tilt up/down for less than 1.5 seconds to increase or decrease the track number. ● Press the ENTER button to show the iPod Menu. CD: ● Tilt up/down for less than 1.5 seconds to increase or decrease the track number. ● Tilt up/down for more than 1.5 seconds to increase or decrease the folder number (if playing c[...]

When installing a CB, ham radio or car phone in your vehicle, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular phone should not be used for any purpose while driving so full atten- tion may be given to vehicle operation. Some [...]

Y our NISSAN is equipped with the Bluetooth 姞 Hands-Free Phone System. If you have a com- patible Bluetooth 姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth 姞 wireless technology, you can make or receive a hands-free telephone call with your cellular p[...]

– Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call. ● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quali[...]

Operating tips T o get the best performance out of the NISSAN V oice Recognition system, observe the following: ● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing voice commands correctly . ● W ait unt[...]

● Numbers can be spoken in small groups. The system will prompt you to continue en- tering digits, if desired. Example: 1-800-662-6200 – “One eight zero zero” The system repeats the numbers and prompts you to enter more. – “six six two” The system repeats the numbers and prompts you to enter more. – “six two zero zero” ● Say ?[...]

PHONE/END Press the button to cancel a VR session or end a call. GETTING ST ARTED The following procedures will help you get started using the Bluetooth 姞 Hands-Free Phone System with NISSAN V oice Recognition. For ad- ditional command options, refer to “List of voice commands” in this section. Choosing a language Y ou can interact with the B[...]

4. Say: “New phone” 䊊 C . The system acknowl- edges the command and asks you to initiate pairing from the phone handset 䊊 D . The pairing procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Owner’s Manual for details. Y ou can also visit www .nissanusa.com/bluetooth for instruc- tions on p[...]

LIST OF VOICE COMMANDS Main Menu “Call” or “Call International” “Phone Book” “Memo Pad” “Setup” When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the com- mands in each sub-menu. Remember to wait for the tone before spea[...]

“Call back” 䊊 D Use the Call Back command to dial the number of the last incoming call within the vehicle. The system acknowledges the command, re- peats the number and begins dialing. If a call back number does not exist, the system announces, “There is no number to call back” and ends the VR session. International For dialing more than [...]

NO TE: Each phone has its own separate phone book. Y ou cannot access Phone A ’s phone book if you are currently connected with Phone B . “New entry” 䊊 A Use the New Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry . For example, say: “Mary.” If the name is t[...]

The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s Manual for details. Y ou can also visit www .nissanusa.com/bluetooth for instructions on transferring phone numbers from NISSAN recommended cellular phones. The system repeats the number and prompts you for the next command. When you have finished enter[...]

“Setup” Main Menu “Setup” “Pair Phone” 䊊 A “List Phone” 䊊 B “Select Phone” 䊊 C “Change Priority” 䊊 D “Delete Phone” 䊊 E “Select Ringtone” 䊊 F “Bluetooth Off” 䊊 G Use the Setup command to change options as- sociated with the Bluetooth 姞 Hands-Free Phone System. “Pair phone” 䊊 A Use the Pair P[...]

For example, if the current priority levels are: Priority Level 1 = Phone A Priority Level 2 = Phone B Priority Level 3 = Phone C and you change the priority level of Phone C to Level 1, then: Priority Level 1 = Phone C Priority Level 2 = Phone B Priority Level 3 = Phone A “Delete phone” 䊊 E Use the Delete Phone command to delete a specific p[...]

4. The system announces: “Press the PHONE/SEND ( ) button for the hands-free phone system to enter the speaker adaptation mode or press the PHONE/END ( ) button to select a dif- ferent language.” 5. Press the button. For information on selecting a different lan- guage, see “Choosing a language” earlier in this section. 6. Voice memory A or [...]

● setup main menu ● Delete ● dial nine seven two six six ● memo pad delete ● call seven six three oh one ● go back ● call five six two eight zero ● dial six six four three seven TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solut[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. NISSAN V oice Recognition system supports the phone c[...]

REGULA T ORY INFORMA TION FCC Regulatory information – CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. – Operation is subject to the following two con- ditions: 1. This device ma[...]

2. Select the “Connect Bluetooth” key. 3. A popup box will appear on the screen, prompting you to confirm that the connec- tion is for the phone system. Select the “Y es” key . 4. When a PIN code appears on the screen, operate the Bluetooth 姞 cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies accor[...]

VEHICLE PHONEBOOK This vehicle has two phonebooks available for your use. Depending on your phone, the system may automatically download your entire cell phone’s phonebook into the “Handset Phone- book” . For the details on downloading your phonebook, see “Handset phonebook” in this section. If your phonebook does not automati- cally down[...]

● Copy from Call History The system will show a list of your incoming, outgoing or missed calls that were down- loaded from your cell phone (depending on your phone’s compatibility) . Y ou may select one of these entries to save in the vehicle phonebook. ● Copy from the Handset The system will show your cell phone’s phonebook that was downl[...]

● V oicetag Confirm and store the voicetag. Voicetags allow easy dialing using the NISSAN V oice Recognition system. For more information, see “NISSAN V oice Recognition System” in this section. T o delete an entry , select the “Delete” key at step 3. HANDSET PHONEBOOK Many phones will support an automatic down- load of the cellular phone[...]

MAKING A CALL T o make a call, follow the procedure below: 1. Press the PHONE button on the instrument panel or the switch on the steering wheel. The “Phone” screen will appear on the display. 2. Select one of the following options to make a call: ● V ehicle Phonebook: Select the name from an entry stored in the vehicle phonebook. ● Handset[...]

There are some options available when receiving a call. Select one of the following displayed on the screen. Answer: Accept an incoming call to talk. Hold Call: Put an incoming call on hold. Reject Call: Reject an incoming call. T o finish the call, follow one of the procedures listed below: a. Select the “Reject Call” key on the display . b. P[...]

ENDING A CALL T o finish the call, perform one of the following procedures: ● Select the “Hang up” key on the “Call in Progress” display. ● Push the switch on the steering wheel. ● When the “Call in Progress” screen is dis- played, press the PHONE button on the instrument panel to hang up. If any other screen is currently displaye[...]

V olume & Ringtone: Adjust the volume level of the ringtone, incoming call sound and outgoing call sound. When the “ Automatic Hold” option is turned on, an incom- ing call will be placed on hold automatically after several rings. When the “Vehicle Ringtone” op- tion is turned on, a specific ringtone that is differ- ent from the cellula[...]

CALL VOLUME Adjusting the incoming or outgoing call volume may improve clarity if reception between callers is unclear. ● Incoming call — adjusting this setting allows you to hear a difference in volume. ● Outgoing call — adjusting this setting allows the person you are talking with to hear a difference in volume. T o access the settings, p[...]

T o improve the recognition success rate when Alternate Command Mode is active, try using the Speaker Adaptation Function available in that mode. See “Speaker Adaptation Function” in this section. Otherwise, it is recommended that Alter- nate Command Mode be turned off and Standard Mode be used for the best recognition perfor- mance. While usin[...]

Available items: ● Getting Started Describes the basics of how to operate the V oice Recognition system. ● Let’s Practice Initiates a practice session that demon- strates how to improve voice recognition by the system. ● Using the Address Book T utorial for using the Address Book ● Finding a Street Address T utorial for entering a destina[...]

Let’s Practice The system is equipped with a tutorial that allows you to practice saying commands and receive feedback on the volume, speed and timing of your speech. T o initiate a practice session, access the User Guide and select the “Let’s Practice” key. Follow the on-screen prompts until the session is com- plete. After the session is [...]

V oice recognition settings The available settings of the NISSAN V oice Rec- ognition system are described. 1. Select “V oice Recognition” . 2. Y ou can confirm the page by scrolling the screen using the NISSAN controller. USING THE S Y STEM Initialization When the ignition switch is placed in the ON position, NISSAN V oice Recognition is initi[...]

2. A list of commands appears on the screen, and the system announces, “W ould you like to access Phone, Navigation, Information, Audio or Help?” 3. After the tone sounds and the icon on the screen changes from to , speak a command. 4. Continue to follow the voice menu prompts and speak after the tone sounds until your desired operation is comp[...]

Standard Mode command list Category Command: COMMAND ACTION Phone Displays Phone function commands. Navigation Displays Navigation function commands. Information Displays Vehicle Information. Audio Displays Audio commands. Help Displays User Guide. Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. Chan[...]

V ehicle Information Command: COMMAND ACTION Fuel Economy Displays Fuel Economy information. Maintenance Displays Maintenance information. T raffic Info. T urns the traffic information system on and off. Where am I? Displays current vehicle location. Audio Command: COMMAND ACTION AM Changes the audio system mode to AM radio. FM Changes the audio sy[...]

V oice command examples Some basic voice command examples are de- scribed here. For navigation system commands, see the sepa- rate Navigation System Owner’s Manual. Example 1 — Placing a call to the phone number 800-662-6200: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Naviga[...]

4. Say “Dial Number”. 5. Say “800” . 6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Say “662” . LHA1334 LHA1335 LHA1336 Monitor, climate, audio, phone and voice recognition systems 4-131[...]

8. The system announces, “Please say the last four digits or say change number.” 9. Say “6200” . 10. The system announces, “Dial or Change Number?” 11. Say “Dial” . 12. The system makes a call to 800-662- 6200. NO TE: ● Y ou can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 con- tinuous digits) , if the[...]

Example 2 — Placing an international call to the phone number 011-81-111-222-3333: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Navigation, Information, Au- dio or Help?” 3. Say “Phone” . 4. Say “International Call”. LHA2555 LHA1333 LHA1334 Monitor, climate, audio, pho[...]

5. Say “011811112223333” . 6. Say “Dial” . 7. The system makes a call to 011-81-111- 222-3333. NO TE: Any digit input format is available in the International Number input process, as well as the special characters such as star (*) , pound (#) , and plus (+) . NISSAN VOICE RECOGNITION AL TERNA TE COMMAND MODE The Alternate Command Mode enab[...]

Activating Alternate Command Mode 1. Press the SETTING button on the instru- ment panel. 2. Select the “Others” key on the display. 3. Select the “Voice Recognition” key. 4. Select the “ Alternate Command Mode” key. 5. The confirmation message is displayed on the screen. Select the “OK” key to activate the Alternate Command Mode. 6.[...]

Only manual controls such as the touchscreen can navigate the command list menu. As an alternative to the voice command “Help”, you may access the command list using the fol- lowing steps: 1. Press the INFO button on the instrument panel. 2. Select the “Others” key using the NISSAN controller. 3. Select the “Voice Recognition” key using[...]

Alternate Command Mode command list Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle Phonebook Makes a call to a contact in the vehicle phonebook. Handset Phonebook Makes a call to a contact in the handset phonebook. International Call Makes an international call by allowing more than 10 digi[...]

COMMAND ACTION Planview Map Changes the Map display to a 2-dimensional view. North Up Changes the Map display to keep north pointing up on the screen. Heading Up Changes the Map display to keep the direction of the vehicle pointing up on the screen. Zoom In <1 to 13> Changes the map scale to a smaller number. Zoom Out <1 to 13> Changes [...]

Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Press the INFO button on the instrument panel. 2. Select the “Others” key . 3. Select the “Voice Recognition” key. 4. Select the “User Guide” key. 5. Sele[...]

USING THE S Y STEM Initialization When the ignition switch is placed in the ON position, NISSAN V oice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If the switch is pressed before the initializa- tion completes, the display will show the mes- sage: “System not ready.” or a [...]

Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● If the command is not recognized, the sys- tem repeats the announcement. Repeat the command in a clear voice. ● Press the switch on the steering wheel to return to the previous screen. ● If you want to cancel the command, press and hold [...]

Speaker Adaptation: Starts a system training procedure to learn the specific sounds of your voice. See “Speaker ad- aptation function” in this section. Alternate Command Mode: For advanced operation, an Alternate Command Mode is provided. This setting enables control of the Audio and Climate Control systems in addi- tion to additional commands [...]

5. Select a category to be learned by the sys- tem from the following list: ● Phone ● Navigation ● Information ● Audio ● Help The voice commands in the category are displayed. 6. Select a voice command to train. The Voice Recognition system starts. 7. The system requests that you repeat a com- mand after a tone. This command is also displ[...]

TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message S[...]

5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 On-pavement and off-road driving precautions ....................................5 - 3 Tire Pressure Monitoring System (TPMS) ..........5 - 3 Avoiding collisi[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in th[...]

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate whe[...]

WARNING ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under- inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious[...]

For Canada: This device complies with RSS-210 of In- dustry Canada. Operation is subject to the following two conditions: 1. This device may not cause interfer- ence, and 2. This device must accept any interfer- ence, include interference that may cause undesired operation of the device. 3. The term “IC:” before the radio certifi- cation number[...]

Help prevent rapid air pressure loss by maintain- ing the correct air pressure and visually inspect the tires for wear and damage. See “Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. If a tire rapidly loses air pressure or “blows-out” while driving, maintain control of the vehicle by following the proc[...]

Please observe the following precautions: WARNING ● Drive carefully when off the road and avoid dangerous areas. Every person who drives or rides in this vehicle should be seated with their seat belt fastened. This will keep you and your passengers in position when driving over rough terrain. ● Do not drive across steep slopes. In- stead drive [...]

● Do not attempt to test a 4WD equipped vehicle on a 2-wheel dynamometer (such as the dynamometers used by some states for emissions testing) , or similar equipment even if the other two wheels are raised off the ground. Make sure you inform test facility personnel that your vehicle is equipped with 4WD before it is placed on a dynamometer. Using[...]

NISSAN INTELLIGENT KEY 姞 (if so equipped) The ignition lock is designed so that the ignition switch cannot be turned to L OCK until the shift selector is moved to the P (Park) position. When turning the ignition switch, make sure the shift selector is in the P (Park) position. If the shift selector is not returned to the P (Park) position, the ig[...]

The operating range of the engine start function is inside of the vehicle 䊊 1 . ● The luggage area is not included in the op- erating range, but the Intelligent K ey may function. ● If the Intelligent K ey is placed on the instru- ment panel, inside the glove box, storage bin or door pocket, the Intelligent Key may not function. ● If the In[...]

T o remove the key from the ignition switch: 1. Shift the shift selector to the P (Park) posi- tion with the ignition switch in the ON posi- tion. 2. Place the ignition switch in the L OCK posi- tion. 3. Remove the key from the ignition switch. If the shift selector is shifted to the P (Park) position after the ignition switch is placed in the OFF [...]

NISSAN VEHICLE IMMOBILIZER S Y STEM The NISSAN Vehicle Immobilizer system will not allow the engine to start without the use of the registered key. If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring) , rest[...]

● If the engine is very hard to start because it is flooded, depress the accelerator pedal all the way to the floor and hold it. Crank the engine for 5 to 6 seconds. After cranking the engine, release the accel- erator pedal. Crank the engine with your foot off the accelerator pedal by turn- ing the ignition key to ST ART . Release the key when t[...]

If: 1. The engine coolant temperature is not re- duced. 2. The air conditioning cooling function does not turn back ON. 3. The engine oil pressure warning/engine coolant temperature high indicator il- luminates, this may indicate a malfunction. Move the vehicle off the road in a safe area and allow the engine to cool. If after check- ing the oil an[...]

CAUTION ● When stopping the vehicle on an uphill grade, do not hold the vehicle by de- pressing the accelerator pedal. The foot brake should be used for this purpose. ● Do not downshift abruptly on slippery roads. This may cause a loss of control. The automatic transmission in your vehicle is electronically controlled to produce maximum power a[...]

WARNING Apply the parking brake if the shift selec- tor is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. If the ignition switch is placed in the OFF or ACC position for any reason while the vehicle is in N (Neutral[...]

1 (Low gear) : Use this position when climbing steep hills slowly or slow driving through deep snow , sand or mud, or for maximum engine braking on steep downhill grades. Do not downshift into the 1 position at speeds over the following and do not exceed the follow- ing speeds in the 1 position. 2WD and AUT O: 43 MPH (70 km/h) w/o tow mode 37 MPH ([...]

WARNING If the shift selector cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunction- ing stop lights could cause an accident injuring yourself and others. Accelerator downshift — in D position — For passing or hill climbing, depress the accel- erator pe[...]

T o engage: Firmly depress the parking brake. T o release: 1. Firmly apply the foot brake. 2. Move the shift selector to the P (Park) posi- tion. 3. Firmly depress the parking brake pedal and it will release. 4. Before driving, be sure the brake warning light goes out. 1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. ON·OFF switch PRECA[...]

CRUISE CONTROL OPERA TIONS The cruise control allows driving at a speed be- tween 25 - 89 MPH (40 - 144 km/h) without keeping your foot on the accelerator pedal. T o turn on the cruise control, push the ON·OFF switch on. The CRUISE indicator light in the vehicle information display will illuminate. T o set cruising speed, accelerate the vehicle to[...]

CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and en- sure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in short- ened engine life and reduced engine performance. ● Avoid driving for long periods at constant speed, ei[...]

WARNING ● For 4WD equipped vehicles, do not at- tempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running. Doing so may result in drivetrain damage or unexpected ve- hicle movement which could result in serious vehicle damage or personal injury. ● Do not attempt to test a 4WD eq[...]

TRANSFER CASE SHIFTING PROCEDURES All mode 4WD system provides 4 positions (AUT O, 2WD, 4H and 4L O) , so you can select the desired drive mode according to the driving conditions. 2WD or 4WD shift procedure: 4WD Shift Switch Position Wheels Driven Indicator Light Use Conditions 4WD Shift Procedure 4WD shift T ransfer 4L O position AUT O Rear wheel[...]

*1: The transfer 4L O position indicator light may blink. Stop the vehicle. Be sure to shift the 4WD shift switch after the shift selector has been moved t o the N position. If the indicator light keeps blinking after the 4WD shift procedure in the previous page, drive slowly without abrupt maneuvers for a while. Then the light will turn on or off.[...]

The transfer case 4WD shift switch is used to select either 2WD or 4WD depending on the driving conditions. There are four types of drive modes available, AUT O, 2WD, 4H and 4L O. The 4WD shift switch electronically controls the transfer case operation. Rotate the switch to move between each mode, 2WD, AUT O, 4H and 4L O. Y ou must push the switch [...]

When the vehicle is stuck, ● Set the 4WD shift switch to 4H or 4L O. ● If it is difficult to free the vehicle, repeat forward and backward movement to in- crease the movement. ● If the vehicle is stuck deep in mud, place stones or wooden blocks under the tires. Then try the recovery procedures above. Tire chains may be effective. CAUTION ● [...]

● Before placing the 4WD shift switch in the 4H position from 2WD or AUTO, ensure the vehicle speed is less than 62 MPH (100 km/h). Failure to do so can damage the 4WD system. ● Never shift the 4WD shift switch be- tween 4LO and 4H while driving. ● Engine idling speed is high while warm- ing up the engine. Be especially careful when starting [...]

● If the 4WD shift indicator light indica- tion changes to 2WD when the 4WD shift switch is shifted to the AUT O or 4H position at low ambient temperatures, the 2WD mode may be being engaged due to malfunctioning drive system. If the indicator does not return to normal and the 4WD warning light comes on, have the system checked by the nearest NIS[...]

● If the warning light is still on after the above operation, have your vehicle checked by a NISSAN dealer as soon as possible. ● The transfer case may be damaged if you continue driving with the warning light blinking. WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite a[...]

3. T o help prevent the vehicle from rolling into traffic when parked on an incline, it is a good practice to turn the wheels as illustrated. ● HEADED DOWNHILL WITH CURB: 䊊 A T urn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. ● HEADED UPHILL WITH CURB: 䊊 B T urn the wheels away fro[...]

WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder. W et brakes When th[...]

WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances. Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or rev[...]

The VDC system can help the driver to maintain control of the vehicle, but it can not prevent loss of vehicle control in all driving situations. When the VDC system operates, the indi- cator in the instrument panel flashes so note the following: ● The road may be slippery or the system may determine some action is required to help keep the vehicl[...]

● When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the indicator may flash or the indicator light may illuminate. This is not a malfunction. Restart the engine after driving onto a stable surface. ● If wheels or tires other than the NISSAN recommended ones are used, the VDC system may not operate properly and th[...]

will sound for only 3 seconds. Once the system detects an object approaching, the tone will sound again. The RSS automatically turns on when the shift selector is placed in R (Reverse) and the ignition switch is ON. The front and rear sonar system off switch on the instrument panel allows the driver to turn the RSS on and off. T o turn the RSS off,[...]

● The system is designed as an aid to the driver in detecting large stationary ob- jects to help avoid damaging the ve- hicle. The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground. ● If your vehicle sustains damage to the front bumper fascia or the rear bumper fascia, leaving[...]

FREEING A FROZEN DOOR LOCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole, or use the remote keyless entry keyfob (if so equipped) or the NISSAN Intelligent K ey 姞 (if so equipped) . ANTI-FREEZE In the winter when it is anticipated that the[...]

● Whatever the condition, drive with cau- tion. Accelerate and slow down with care. If accelerating or downshifting too fast, the drive wheels will lose even more traction. ● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement. ● Allow greater following distances on slippery roads. ● Wa[...]

MEMO 5-40 Starting and driving[...]

6 In case of emergency Emergency engine shut off (Push-button ignition models only) ......................................6 - 2 Hazard warning flasher switch ......................6 - 2 Flat tire ...........................................6 - 3 Tire Pressure Monitoring System (TPMS) ..........6 - 3 Changing a flat tire .............................[...]

T o shut off the engine in an emergency situation while driving, perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or – Push and hold the push-button ignition switch for more than 2 seconds. Push the switch on to warn other drivers when you must stop or park under emerg[...]

TIRE PRESSURE MONIT ORING S Y STEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low tire pressure warning light is lit, and the CHECK TIRE PRESSURE warning appears in the vehicle information display, one or more of your tires is significantly un[...]

4. T urn off the engine. 5. Raise the hood to warn other traffic and to signal professional road assistance person- nel that you need assistance. 6. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle. WARNING ● Make sure the parking brake is securely applied and the automatic transmiss[...]

3. Unscrew the rotating mechanism 䊊 A coun- terclockwise until loosened on cradle. Re- move the jack. 4. Assemble the two straight pieces of the jack rod. Find the oval-shaped opening above the middle of the license plate. Pass the T -shaped end of the jack rod through the opening and direct it toward the spare tire winch, located directly above [...]

CAUTION Be sure to center the spare tire suspend- ing plate on the wheel and then lift the spare tire. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands. ● Use only the jack provided with y[...]

2. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. The jack -up points are indicated by stamped ar- rows on the side of the frame. The jack should be used on firm and level ground. 3. Install the assembled jack rod into the jack as shown. 4. T o lift the vehicle, secu[...]

Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading “ Wheels and tires” in the “Mainte- nance and do-it-yourself” section of this manual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger [...]

WARNING ● Always make sure that the spare tire and jacking equipment are properly se- cured after use. Such items can become dangerous projectiles in an accident or sudden stop. ● The spare tire is designed for emer- gency use. See specific instructions un- der the heading “ Wheels and tires” in the “Maintenance and do-it-yourself” sect[...]

WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other. Do not allow the two vehicles to touch. 2. Apply the parking brake. Move the shift se- lector t[...]

WARNING Do not push start this vehicle. The three- way catalyst may be damaged. CAUTION Automatic transmission models cannot be push-started or tow-started. Attempt- ing to do so may cause transmission damage. WARNING ● Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. ● T o avoid the dang[...]

6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary. Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect [...]

T OWING RECOMMENDED B Y NISSAN T wo-wheel drive models NISSAN recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION ● Never tow automatic transmission models with the rear wheels on the ground or four wheels on the ground (forward or backward) , as this[...]

Four-wheel drive models NISSAN recommends that towing dollies be used when towing your vehicle or place the ve- hicle on a flat bed truck as illustrated. CAUTION Never tow 4WD models with any of the wheels on the ground as this may cause serious and expensive damage to the transfer case and transmission. VEHICLE RECOVER Y (freeing a stuck vehicle) [...]

● Do not use the vehicle tie-downs to tow or free a stuck vehicle. ● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions. ● Always pull the recovery device straight out from the front of the vehicle. Never pull at an angle. ● Route recovery devices so they do not touch any part of the veh[...]

MEMO 6-16 In case of emergency[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti[...]

REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBOD Y In areas where road salt is used in winter, it is necessary to clean the u[...]

Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry , soft cloth. Regular care and cleaning is required in order to maintain the appearance of the leather[...]

Floor mat positioning aid This vehicle includes two driver’s side front floor mat brackets and one passenger’s side front floor mat bracket to help keep your floor mats in place. Genuine NISSAN floor mats have been specially designed for your vehicle model. The driver’s side floor mat has two grommet holes incorporated in it and the passenger[...]

T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process. Road salt also accel- erates the disintegration of paint surfaces. T O PRO TECT Y OUR VEHICL[...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions ...........................8 - 5 Engine compartment check locations ................8 - 6 Engine cooling system ............[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money. However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make [...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh[...]

Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly, and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay, hard steering or strange nois[...]

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking brake securely and block the wheels to prevent [...]

1. Battery 2. Fuse/fusible link box 3. T ransmission dipstick 4. Engine oil filler cap 5. Brake fluid reservoir 6. Windshield-washer fluid reservoir 7. Air cleaner 8. Drive belt location 9. Radiator cap 10. P ower steering fluid reservoir 11. Engine oil dipstick 12. Engine coolant reservoir NO TE: Engine cover removed for clarity. WDI0630 ENGINE CO[...]

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution con- tains rust and corrosion inhibitors. Additional en- gine cooling system additives are not necessary. WARNING ● [...]

CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level, add coolant to the MAX level. If the reservoir is empty , check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radiator, fill the radiator with coolant up to[...]

CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Re- insert it all the way . 5. Remove the d[...]

CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the oil filler cap 䊊 A by turning it counterclockwise. 4. Place a large drain pan under the drain plug 䊊 B . 5. Remove the drain plug 䊊 B with a wrench [...]

CHANGING ENGINE OIL FIL TER 1. Park the vehicle on a level surface and apply the parking brake. 2. T urn the engine off. 3. Place a large drain pan under the oil filter 䊊 A . 4. Loosen the oil filter 䊊 A with an oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it by hand. CAUTION Be careful not to burn you[...]

The fluid level should be checked using the HO T MAX range on the power steering fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the COLD MAX range on the power steering fluid reservoir at fluid tempera- tures of 32° - 86°F (0° - 30°C) . If the fluid is at or below the MIN line, add Genu- ine NISSAN PSF to HO T M[...]

BRAKE FLUID Check the brake fluid level in the reservoir. If the fluid level is below the MIN line or the brake warning light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DO T 3 fluid up to the MAX line. If fluid must be added frequently , the system should be checked by a NISSAN dealer. WINDSHIELD-W ASHER FLUID RESERVOIR[...]

● Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge. NO TE: Care should be taken to avoid [...]

1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. Reinstall the vent caps. V ehicles operated in high temperatures or under severe co[...]

CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will by- pass the variable voltage control sys- tem and the vehicle battery may not charge completely. ● Use electrical accessories with the en- gine running to avoid discharging the vehicle battery. Y our vehicle is equipped with a variable voltage control system. T[...]

1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is loose, have it replaced or adjusted by a NISSAN dealer. 2. Have the belt checked regularly for condi- tion and tension in accordance with the maintenance schedule found in the “NISSAN Service and Maintenance Guide”. REPLACI[...]

The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Mainte- nance Guide.” T o remove the air cleaner filter: 䊊 1 Unlatch the clips and move the air cleaner cover upward. 2. Remove the air cleaner filter. 3. Wipe the inside of the air cleaner filter hous- ing and[...]

1. Remove the 2 lower glove box screws. 2. Open the glove box, then remove the three upper glove box screws. Remove the glove box assembly from the instrument panel to access the in-cabin microfilter cover. 3. Remove the filter cover bolt and remove the filter cover. WDI0622 WDI0623 LDI0387 Maintenance and do-it-yourself 8-19[...]

NO TE: The filters are marked with air flow arrows. The end of the filter with the arrow should face the rear of the vehicle. The arrows should face downward. 4. Insert the first filter into the housing and slide it over to the right. Insert the second filter into the housing. 5. Replace the filter cover. 6. Install the glove box assembly. 7. Fill [...]

6. Return the wiper to its original position and release it until it has made contact with the windshield. CAUTION ● After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. ● Make sure the wiper blades contact the glass; otherwise the arms may be dam- aged from wind pres[...]

Rear window wiper blade 䊊 1 Lift the wiper arm away from the rear win- dow . 䊊 2 Rotate the blade until it becomes free. 䊊 3 Insert a new blade onto the wiper arm and snap into place. LDI0379 8-22 Maintenance and do-it-yourself[...]

If the brakes do not operate properly, have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with self-adjusting brakes. The front and rear disc-type brakes self-adjust every time the brake pedal is applied. WARNING See a NISSAN dealer for a brake system check if the brake pedal height does not return to normal[...]

If a type A fuse is used to replace a type B fuse, the type A fuse will not be level with the fuse pocket as shown in the illustration. This will not affect the performance of the fuse. Make sure the fuse is installed in the fuse box securely. T ype B fuses cannot be installed in the under- hood fuse boxes. Only use type A fuses in the underhood fu[...]

5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace with only Genuine NI[...]

If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Open the glove box to access the fuse box cover. 3. Pull the fuse box cover to remove. 4. Remove the fuse with the fuse puller. 5. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 6. P[...]

Extended storage switch If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse. NO TE: The extended storage switch is used for long term vehicle storage. Even if the ex- tended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the switch with a new fuse. Ho[...]

KEYFOB (if so equipped) Replace the battery in the keyfob as follows: 䊊 1 Open the lid using a coin 䊊 A . 䊊 2 Remove the battery 䊊 B . 䊊 3 Install a new battery 䊊 C with the “+” facing down. ● Hold the battery by the edges. Holding the battery across the contact points will seri- ously deplete the storage capacity . ● Do not tou[...]

FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired operation. Note: Changes or modifications not expressly appr[...]

4. Close the lid securely as illustrated 䊊 C 䊊 D . 5. Operate the buttons to check the operation. See a NISSAN dealer if you need assistance for replacement. FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2)[...]

NO TE: Use the same number and wattage as shown in the chart. Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. FOG L[...]

EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight assembly* High 65 9005 (HB3) Low 55 9006 (HB4) Park/T urn 28/8 3457K Sidemarker 3.8 194 Side turn signal light* (if so equipped) — (LED) Front fog light (if so equipped) 55 H11 Puddle lamp 9 906 Room/map lights 8 – Personal lights 6 WXW52 Footwell* 3.4 1 58 Glove box light* 3.4 15[...]

1. Room/map light 2. Front personal lights 3. Step light 4. Puddle lamp/Side turn signal light (if so equipped) 5. High-mount stoplight 6. Cargo light 7. License plate light 8. Rear combination light 9. Headlight assembly 10. Fog light (if so equipped) Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, fir[...]

Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Map lights LDI0389 Personal lights LDI0364 V anity mirror LDI0385 8-34 Maintenance and do-it-yourself[...]

Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Step light LDI0341 Puddle light LDI0388 Cargo light WDI0233 Maintenance and do-it-yourself 8-35[...]

If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK [...]

For more details, refer to “Low tire pres- sure warning light” in the “Instruments and controls” section, “Tire pressure informa- tion” in the “Monitor, climate, audio, phone and voice recognition systems” section, “Tire Pressure Monitoring System (TPMS)” in the “Starting and driving” sec- tion, and “Flat tire” in the ?[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory. 䊊 4 Col[...]

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove [...]

TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro- vides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of [...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three[...]

䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi[...]

If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels. For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires. Skid and traction capabilities [...]

Wheel nut tightening torque: 98 ft-lb (133 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driv[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual. WARNING ● The use of tires other than those recom- mended or the[...]

The tire pressure and wheel alignment should also be checked and corrected as necessary. Contact a NISSAN dealer. Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be bal- anced as required. Wheel balance service should be per- formed with the whee[...]

9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation (without Flexible Fuel V ehicle option) .................................9 - 3 Flexible fuel vehicle (FFV) fuel recommendation (if so equipped) .................9 - 5 Engine oil and oil filter recommendations ..........9 - 6 Air condi[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 28 gal 23-1/4 gal 105[...]

FUEL RECOMMENDA TION (without Flexible Fuel V ehicle option) Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler door label can operate on E-85. Fuel system or other damage can occur if E-85 is used in vehicles that are not de[...]

● E-15 fuel contains more than 10% oxy- genate. E-15 fuel will adversely affect the emission control devices and sys- tems of the vehicle and should not be used. Damage caused by such fuel is not covered by the NISSAN new ve- hicle limited warranty. ● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood [...]

FLEXIBLE FUEL VEHICLE (FFV) FUEL RECOMMENDA TION (if so equipped) Y our vehicle is designed to use (E-85) Fuel Etha- nol, “Regular” unleaded regular gasoline or any percentage of the two fuels combined. U.S. government regulations require Fuel Ethanol dispensing pumps to have a small, square, orange and black label with the common abbreviation [...]

Fuel consumption Because E-85 fuel contains less energy per gal- lon than gasoline, you will experience an increase in fuel consumption. Y ou can expect your fuel mileage to decrease by about 30% compared to gasoline operation. Replacement parts Many components in your Flexible Fuel Vehicle (FFV) are designed to be compatible with etha- nol. Always[...]

Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be oper- ated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage. Selecting the correct[...]

ENGINE Model VK56DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 8-cylinder, V-block, Slanted at 90° Bore x Stroke in (mm) 3.858 x 3.622 (98 x 92) Displacement cu in (cm 3 ) 338.78 (5,552) Firing order 1–8–7–3–6–5–4–2 Idle speed No adjustment is necessary . A/T (in “N” position) Ignition timing (degree B.T .D.C. at idle spe[...]

WHEELS AND TIRES Wheels 18 x 8.0JJ 20 x 8.0JJ Tires P265/70R18 P275/60R20 Spare tire Full size DIMENSIONS AND WEIGHTS Overall length in (mm) 207.7 (5,275) Overall width in (mm) 79.3 (2,016) Overall height 2wd with roof rack in (mm) 77.2 (1,962) 4wd with roof rack in (mm) 78.0 (1,982) Front Track 18 inch tire in (mm) 67.5 (1,715) 20 inch tire in (mm[...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V .S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle W e[...]

TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. Use the following steps to mount the front license plate: 1. Make holes on the p[...]

WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a se[...]

VEHICLE L OAD CAP ACITY Do not exceed the load limit of your ve- hicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Load- ing Information label. T o get “the combined weight of occu- pants and cargo” , ad[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av[...]

● Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury. L OADING TIPS ● The GVW must not exceed GVWR or GA WR as specified on the F [...]

WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged. ● For the first 500 miles (800 km) that you tow [...]

T emperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power. V ehicle speed may decrease under [...]

T owing capacities are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load. The vehicle and trailer need to be weighe[...]

The available towing capacity may be less than the maximum towing capacity due to the passen- ger and cargo load in the vehicle. Remember to keep trailer tongue weight be- tween 10 - 15% of the trailer weight or within the trailer tongue load specification recommended by the trailer manufacturer. If the tongue load becomes excessive, rearrange the [...]

T OWING SAFETY T railer hitch Y our vehicle may be equipped with an optional trailer tow package. The trailer tow package in- cludes a receiver-type frame mounted hitch. This hitch is rated for the maximum towing capacity of this vehicle when the proper towing equipment is used. Choose a proper ball mount and hitch ball that is rated for the traile[...]

NO TE: A weight-distributing hitch system may af- fect the operation of trailer surge brakes. If you are considering use of a weight- distributing hitch system with a surge brake-equipped trailer, check with the surge brake, hitch or trailer manufacturer to determine if and how this can be done. Follow the instructions provided by the manufac- ture[...]

CAUTION ● Special hitches which include frame re- inforcements are required for towing above 2,000 lb (907 kg) . Suitable genu- ine NISSAN hitches, ball mounts and hitch balls for pickup trucks and sport utility vehicles are available at a NISSAN dealer. ● The hitch should not be attached to or affect the operation of the impact- absorbing bump[...]

T railer brakes When towing a trailer load of 3,500 lbs. (1,587 kg) or more, trailers with a brake system MUST be used. However, most states require a separate braking system on trailers with a loaded weight above a specific amount. Make sure the trailer meets the local regulations and the regulations where you plan to tow . Several types of brakin[...]

2. Apply the parking brake to access the jumper harness connector. 3. Locate the jumper harness connector under the lower portion of the instrument panel. The connector is taped to the wiring harness 䊊 1 as indicated. ● The connector is marked with a white tag with “elec brake conn”. Wire color designation for electric trailer brake control[...]

4. Peel off the tape and connect the jumper harness to the connector 䊊 2 . 5. Release the parking brake. 6. Install the aftermarket electric trailer brake controller according to the manufacturer’s instructions. Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched. Do not drive [...]

Always block the wheels on both vehicle and trailer when parking. Parking on a slope is not recommended; however, if you must do so: CAUTION If you move the shift selector to the P (Park) position before blocking the wheels and applying the parking brake, transmission damage could occur. 1. Apply and hold the brake pedal. 2. Have someone place bloc[...]

Do the following if the trailer begins to sway: 1. T ake your foot off the accelerator pedal to allow the vehicle to coast and steer as straight ahead as the road conditions allow. This com- bination will help stabilize the vehicle – Do not correct trailer sway by steering or applying the brakes. 2. When the trailer sway stops, gently apply the b[...]

FLA T T OWING T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION ● Failure to follow these guidelines can result in severe transmission damage. ● Whenever flat towing your vehicle, al- ways tow f[...]

WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristic s. T emperature A , B and C The temperature grades are A (the highest) , B, and C, representing the tire’s resistance to the generation of heat, and its abi[...]

For USA If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exis[...]

Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the “ready condi- tion” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns. Usually, the ready condition [...]

Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory- trained technicians working at NISSAN dealer- ships. Genuine NISSAN Owner’s Manuals can also be purchased. For USA Fo[...]

10 Index 4WD warning light .............. .2-16 A Adjusting pedal position ........... .3-31 Air bag (See supplemental restraint system) .................... .1-57 Air bag system Front (See supplemental front impact air bag system) .............. .1-64 Air bag warning labels ............ .1-71 Air bag warning light .......... .1-72, 2-18 Air cleane[...]

Child restraints ...... .1-34, 1-35, 1-36, 1-38 Precautions on child restraints ........ .1-36, 1-44, 1-48, 1-53 T op tether strap anchor point locations . .1-42 Child restraint with top tether strap ...... .1-41 Child safety rear door lock ........... .3-7 Chimes, audible reminders .......... .2-20 Cleaning exterior and interior .......... .7-2 Cl[...]

Front air bag system (See supplemental restraint system) ..... .1-64 Front seats .................... .1-2 Fuel Capacities and recommended fuel/lubricants ................ .9-2 Fuel economy ............... .5-22 Fuel-filler door and cap .......... .3-28 Fuel gauge .................. .2-7 Fuel octane rating .............. .9-4 Fuel recommendation ..[...]

Engine serial number ........... .9-11 F .M.V .S.S. certification label ........ .9-11 Tire and Loading Information label .... .9-12 V ehicle identification number (VIN) plate . .9-10 W arning labels (for SRS) ......... .1-71 LA T CH (Lower Anchors and T ethers for CHildren) System ..................... .1-38 License plate Installing the license pl[...]

Owner’s manual/service manual order information ................... .9-34 P Parking Parking brake operation .......... .5-19 Parking/parking on hills .......... .5-30 Pedal position adjustment ........... .3-31 Personal lights ................. .2-57 Phone, Bluetooth 姞 hands-free system ................. .4-96, 4-111 Power Power door locks ....[...]

Shifting Automatic transmission .......... .5-16 Shift lock release ................ .5-18 Shoulder belt height adjustment ....... .1-33 Side air bag system (See supplemental side air bag, curtain and rollover air bag systems) . . .1-69 Sonar Rear system ................ .5-35 Spark plug replacement ............ .8-17 Speedometer ..................[...]

U Uniform tire quality grading .......... .9-30 USB interface Audio file operation ......... .4-79, 4-81 Video file operation ............ .4-83 V V anity mirror .................. .3-32 V ariable voltage control system ........ .8-16 V ehicle dimensions and weights ........ .9-9 V ehicle dynamic control (VDC) off switch . . .2-36 V ehicle dynamic [...]

RECOMMENDED FUEL (without Flexible Fuel V ehicle [FFV] option): Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler door label can operate on E-85. Fuel system or other damage can occur if E-85 is used in vehicles that are not[...]

RECOMMENDED NEW VEHICLE BREAK -IN PROCEDURE: During the first 1,200 mi (2,000 km) of vehicle use, follow the recommendations outlined in the “Break -in schedule” information found in the “Starting and driving” section of this manual. Fol- low these recommendations for the future reli- ability and economy of your new vehicle. Failure to foll[...]

® 2014 AR MAD A OWN E R’S MAN UAL For y our s af ety , read car efully and keep in this v ehicle. 2014 N I SSAN AR MAD A T A6 0-D Printing : September 2013 (19) Publication No.: Printed in U .S.A. T A6 0-D ‘14 OM14E T A60U0[...]