Nokia 9450 S Bedienungsanleitung

Owne r' s Manual MEDIAMASTER 9450 S[...]

GB 2[...]

GB 3 Contents FOR YOUR SAFETY 4 Rear panel 4 Front panel 5 INSTALLATION OF THE MEDIAMASTER 5 Connecting the Mediamaster to the satellite dish 6 Connecting the Mediamaster to a TV set 6 Connecting to a TV and a video recorder 7 If your VCR does not have a SCART- Connector 7 Connecting to an analogue satellite- receiver and a video recorder 7 Connect[...]

GB 4 Keep a clear space around the Mediamaster to allow for sufficient ventilation. Do not cover the Mediamaster or place it on a unit that emits heat.  Use a soft cloth and a mild solution of dish washing liquid to clean the casing.  Never allow liquids, spray or other materials to come into contact with the inside of the Mediamaster.  Se[...]

GB 5 The box for your Mediamaster should contain the following items: Mediamaster 9450S includes About the SCART sockets The rear panel of the Mediamaster is equipped with 2 SCART sockets . When you connect other products to any of these sockets, always use fully featured SCART cables (as supplied). There are less well specified SCART cables on the[...]

GB 6 Installing the satellite dish  Your satellite dish should be installed with a cable for you to connect to t he Mediamaster. If you do not have this cable you will need to buy one from a dealer (tell the dealer you need a coaxial cable and F-connectors).  Connect the cable from the satellite dish to the socket marked LNB IN on the back of[...]

GB 7 Refer to your video recorder manual for full instructions.  Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.  Connect another SCART cable between the VCR and the AUX SCART socket on the Mediamaster.  Connect the RF cable from the RF output on the VCR to the TV aerial input on [...]

GB 8 Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your Hi Fi system.  Remove the cover on the battery compartment at the bottom of the remote control handset.  Insert the 2 x AAA (1,5 V) batteries, as shown in the diagram, taking care to observe the + and - m[...]

GB 9 This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out using the buttons on the front panel. Switch the Mediamaster in and out of standby mode. EXIT TV Return to the viewing mode from a menu without storing settings (in menu mode). Switch between TV or Radio [...]

GB 10 Once you have correctly connected the Mediamaster, you also have to perform some Basic Settings . During this procedure, helpful information is displayed at the bottom of the menus. Please note! The OK button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, an[...]

GB 1 1 To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels. Now you should have the Welcome Menu on the TV screen. Press the OK bu[...]

GB 12 Satellite name: From here you can select a name for the configuration. Switch Type: There are in principle two kinds of external DiSEqC switches on the market at present. One for connection of two LNBs. The other one for connection of up to 4 LNBs. If you have the other switch, defined as DiSEqC, Level 1 or 2 on the market, select DiSEqC 1, 2[...]

GB 13 You can use manual channel search if you want to add new channels later. For example If you have a special antenna configuration which is not assigned in the Antenna alternative menu, you can add new channels using the manual channel search function. When you perform a Manual Search you first need to enter some parameters for the channel sear[...]

GB 14 If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select 4:3 (Pan & Scan) or 4:3 (Letterbox) to change display format. 4:3 (Pan & Scan) will fill up the screen vertically, but cut off some information from the left and right sides of the picture. 4:3 (Letterbox) will give a complete picture, but [...]

GB 15 By pressing the GUIDE button you obtain access to the TV Guide which gives the titles of the current programmes on the different channels. By pressing the LEFT or RIGHT button you also can also obtain information about the next programme. The minimized viewing window also helps you to select channels and information. Use the Up/Down buttons t[...]

GB 16 While listening to radio Programmes you can see a programme list on the screen by pressing the OK button. You can change to another channel by pressing the UP/DOWN buttons and then pressing the OK button. To move faster (8 at the time) between the channels you can also use the DOUBLE ARROW buttons. With a Video Cassette Recorder (VCR) connect[...]

GB 17 TV/Radio Channels will show a list with the names of the different channels. To move faster within the list, use the DOUBLE ARROW buttons. Press OK to enter a marked channel. These guides will give you an overview of programme information from the TV/Radio channels. Step to different channel numbers with the UP/DOWN buttons. If you stop on a [...]

GB 18 If you have created several Favorite lists you can determine the sequence in which the lists will appear. To rearrange channels, select the list which you want to move using the OK button. Move the channels to the desired position using the UP/DOWN button and press OK. You can change the list name with the virtual keyboard on the screen. Type[...]

GB 19 You can arrange the order of channels within your favorite lists. To rearrange channels, select the channel which you want to move using the OK button. Move the channels to the desired position using the UP/DOWN button and press OK. From here, when the All TV list is selected in the Edit Channels menu, you can remove channels. Please note. Ch[...]

GB 20 Change access code From here you can change the access code from the standard 1234. DO NOT FORGET IT! Without it you do not have access to any of the functions where the code is required! If you forget it, you have to contact an Authorized Nokia Service Center to get help. From here you can change the language for the menus, main audio langua[...]

GB 21 You can enjoy this On/Of f Timer for such a convenience as wake-up or automatic VCR recording. Mediamaster will be automatically switched-on and play specified channel for the specified time, and then switched-of f. You may specify up to 8 separate lists with turn-on time, date, duration, channel and occurrence options. Time Setting You can s[...]

GB 22 Select this Menu from the line Installation in the Main Menu. The submenu will give you the opportunity to change the preferences performed during first time installation. You can also add features that were not included in the first installation. Please note that helpful information for every line is given at the end of the menu. Please refe[...]

GB 23 This will start the Installation procedure from the Welcome Menu . When you press OK in the Welcome Menu again, be aware of the fact, that all previous channels and settings will be erased! To exit the Reinstall menu without erasing any channels, press Back . This gives general information about which hardware and software version your Mediam[...]

GB 24 AGC Acquisition Gain Control. BER : Bit Error Ratio. DiSEqC Digital satellite Equipment Control. The outdoor unit comprises the antenna, one or more LNBs polarizers and external components. DVB The Digital Video Broadcast group was created to establish a technical frame work for the introduction of digital video broadcasting systems. EPG Elec[...]

GB 25 Problem Possible causes What to do The display on the front panel does not light up/is not lit. Mains lead is not connected. Check that the mains lead is plugged into the power socket. No sound or picture. The satellite dish is not pointing at the satellite. No signal or weak signal. The LNB is faulty. Adjust the dish. Check the signal level [...]

GB 26 Transmission Standards DVB, MPEG 2 LNB/Tuner input Connector 2 x F-type (Loop Through) Input frequency 950-2150 MHz Max Current 500 mA max Supply Voltage 13 V/18 V DiSEqC 1.0 RF Impedance 75 Ohm Demodulator QPSK Symbol rate 2-45 Msym/s SCPC and MCPC Video decoder MPEG-2 Main Profile @ Main Level Data rates up to 15 Mbit/s Video formats 4:3 (l[...]

GB 27 System Settings 1. TV Screen Format 2.Output Selection 3.UHF Channel Number 4.RF Modulator Type 5.Information Box Time out 6.Display Volume Indicator 7.Date Setting(dd/mm/yyyy) 8. Time Setting(hh:mm) 9.GMT Of fset 7.Game First Time Installation MENUS SCREEN STRUCTURE Welcome Menu Language Settings 1.Menu Language 2.Main Audio Lang 3.Alternati[...]

Nokia is a registered trademark of Nokia Corporation www.nokia.com KQX1A644Z 66 76967-1 1[...]